1 ############################################################################
3 # This is the top-level Makefile for GHC
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
16 # bootstrap2 + we build GHC one more time ("stage 3")
19 # Just build up to stage 1
22 # Just build stage 2 (stage 1 must be built)
25 # Just build stage 3 (stage 2 must be built)
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
35 # Make a source dist (WARNING: runs 'make distclean' first)
38 # Builds a binary distribution
40 # framework-pkg [MacOS only]
41 # Builds /Library/Frameworks/GHC.framework wrapped into a Mac
44 # framework-binary-dist [MacOS only]
45 # Builds GHC.framework encapsulating a binary distribution
46 # (to give a relocatable framework)
49 # Builds an HC-file bundle, for bootstrapping
51 # clean, distclean, maintainer-clean
52 # Increasing levels of cleanliness
54 ############################################################################
57 include $(TOP)/mk/boilerplate.mk
60 # Order is important! It's e.g. necessary to descend into include/
61 # before the rest to have a config.h, etc.
63 # If we're booting from .hc files, swap the order
64 # we descend into subdirs - to boot utils must be before driver.
66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
68 # We can't 'make boot' in libraries until stage1 is built
69 ifeq "$(BootingFromHc)" "YES"
70 SUBDIRS_BUILD = gmp libffi includes rts compat compiler docs utils driver
72 SUBDIRS_BUILD = gmp libffi includes compat utils driver docs compiler rts libraries/Cabal/doc
75 SUBDIRS = gmp libffi includes compat utils driver docs rts libraries compiler libraries/Cabal/doc
77 # Sanity check that all the boot libraries are in the tree, to catch
78 # failure to run darcs-all.
80 @ds=`cat libraries/boot-packages`;\
82 if test ! -d libraries/$$d; then \
83 echo "Looks like you're missing libraries/$$d,"; \
84 echo "maybe you haven't done './darcs-all get'?"; \
88 @if test ! -f libraries/base/configure; then \
89 echo "Looks like you're missing base's configure script."; \
90 echo "Did you run 'sh boot' at the top level?"; \
94 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
95 ifneq "$(WhatGccIsCalled)" ""
96 GCC_LIB_DEP = stamp.inplace-gcc-lib
100 stage1 : $(GCC_LIB_DEP) check-packages
101 $(MAKE) -C utils/mkdependC boot
102 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
103 for i in $(SUBDIRS_BUILD); do \
104 echo "------------------------------------------------------------------------"; \
105 echo "== $(MAKE) boot $(MFLAGS);"; \
106 echo " in $(shell pwd)/$$i"; \
107 echo "------------------------------------------------------------------------"; \
108 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
109 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
111 for i in $(SUBDIRS_BUILD); do \
112 echo "------------------------------------------------------------------------"; \
113 echo "== $(MAKE) all $(MFLAGS);"; \
114 echo " in $(shell pwd)/$$i"; \
115 echo "------------------------------------------------------------------------"; \
116 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
117 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
119 $(MAKE) -C libraries boot
120 $(MAKE) -C libraries all
122 # When making distributions (i.e., whether with binary-dist or using the
123 # vanilla install target to create an installer package), we can have problems
124 # if some things (e.g. ghc-pkg) are compiled with the bootstrapping compiler
125 # and some (e.g. the stage 2 compiler) with the stage1 compiler. See #1860 for
126 # an example. Thus, we explicitly build a second version with the stage 1
127 # compiler of all utils that get installed and of all extra support binaries
128 # includes in binary dists.
129 stage2 : check-packages
130 $(MAKE) -C compiler boot stage=2
131 $(MAKE) -C compiler stage=2
134 stage3 : check-packages
135 $(MAKE) -C compiler boot stage=3
136 $(MAKE) -C compiler stage=3
138 bootstrap : bootstrap2
143 bootstrap3 : bootstrap2
146 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
147 ifneq "$(WhatGccIsCalled)" ""
148 all :: stamp.inplace-gcc-lib
150 .PHONY: stamp.inplace-gcc-lib
152 # This is a hack to make Cabal able to find ld when we run tests with
153 # the inplace ghc. We should probably install all the gcc stuff in our
154 # tree somewhere, and then have install copy it from there rather than
155 # from the filesystem.
156 stamp.inplace-gcc-lib:
157 $(RM) -r compiler/gcc-lib
158 mkdir compiler/gcc-lib
159 cp $(LD) compiler/gcc-lib
163 $(RM) -r compiler/gcc-lib
164 $(RM) -f inplace-gcc-lib
170 # -----------------------------------------------------------------------------
173 # We want to install the stage 2 bootstrapped compiler by default, but we let
174 # the user override this by saying 'make install stage=1', for example.
176 INSTALL_STAGE = stage=2
182 $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
184 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
185 install :: check-packages
186 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
187 for i in $(SUBDIRS); do \
188 echo "------------------------------------------------------------------------"; \
189 echo "== $(MAKE) $@ $(MFLAGS);"; \
190 echo " in $(shell pwd)/$$i"; \
191 echo "------------------------------------------------------------------------"; \
192 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
193 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
196 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
197 # These files need to be in the InstallShield
198 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
199 # in the top-level directory of the distribution
200 INSTALL_DATAS += ANNOUNCE LICENSE README
203 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
204 # and the perl interpreter and dll into the GHC prefix directory.
205 # Gcc and Perl source locations derived from configuration data.
206 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
207 ifneq "$(WhatGccIsCalled)" ""
209 -mkdir $(prefix)/gcc-lib
210 -mkdir $(prefix)/include
211 -mkdir $(prefix)/include/mingw
212 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
213 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
214 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
215 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
216 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
217 -cp $(GccDir)gcc.exe $(prefix)
218 -cp $(GccDir)as.exe $(prefix)/gcc-lib
219 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
220 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
221 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
222 -cp $(GhcDir)../perl.exe $(prefix)
223 -cp $(GhcDir)../perl56.dll $(prefix)
227 # Install gcc-extra-opts
229 $(INSTALL_DIR) $(DESTDIR)$(libdir)
230 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
233 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
234 for i in $(SUBDIRS); do \
235 echo "------------------------------------------------------------------------"; \
236 echo "== $(MAKE) $@ $(MFLAGS);"; \
237 echo " in $(shell pwd)/$$i"; \
238 echo "------------------------------------------------------------------------"; \
239 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
240 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
243 # -----------------------------------------------------------------------------
244 # Making a binary distribution
246 # `dist' `binary-dist'
247 # Create a distribution tar file for this program. The tar file
248 # should be set up so that the file names in the tar file start with
249 # a subdirectory name which is the name of the package it is a
250 # distribution for. This name can include the version number.
252 # For example, the distribution tar file of GCC version 1.40 unpacks
253 # into a subdirectory named `gcc-1.40'.
255 # The easiest way to do this is to create a subdirectory
256 # appropriately named, use ln or cp to install the proper files in
257 # it, and then tar that subdirectory.
259 # The dist target should explicitly depend on all non-source files
260 # that are in the distribution, to make sure they are up to date in
261 # the distribution. See Making Releases.
263 # binary-dist is a GHC addition for binary distributions
267 -rm -rf $(BIN_DIST_DIR)
268 -$(RM) $(BIN_DIST_TARBALL)
270 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
273 $(MAKE) prefix=$(BIN_DIST_DIR) install
274 $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
277 cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
280 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
281 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
285 BinDistDirs = includes compiler docs rts
287 BIN_DIST_TOP= distrib/Makefile \
288 distrib/configure-bin.ac \
299 ifeq "$(darwin_TARGET_OS)" "1"
300 BIN_DIST_TOP+=mk/fix_install_names.sh
303 .PHONY: binary-dist-pre% binary-dist
305 binary-dist:: binary-dist-pre
308 $(MKDIRHIER) $(BIN_DIST_DIR)/mk
309 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
310 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_DIR)/mk/target.mk
311 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
312 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
313 echo '' > $(BIN_DIST_DIR)/mk/compat.mk
314 cp mk/package.mk $(BIN_DIST_DIR)/mk/
315 cp mk/install.mk $(BIN_DIST_DIR)/mk/
316 cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
317 cp mk/fptools.css $(BIN_DIST_DIR)/mk/
318 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
319 $(MKDIRHIER) $(BIN_DIST_DIR)/share
322 $(MAKE) -C gmp binary-dist DOING_BIN_DIST=YES
323 $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
324 $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
325 $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
326 $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
327 $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
328 $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
329 $(MAKE) -C libraries binary-dist DOING_BIN_DIST=YES
330 $(MAKE) -C libraries/Cabal/doc binary-dist DOING_BIN_DIST=YES
332 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
335 @for i in $(BIN_DIST_TOP); do \
336 if test -f "$$i"; then \
337 echo cp $$i $(BIN_DIST_DIR); \
338 cp $$i $(BIN_DIST_DIR); \
341 @echo "Configuring the Makefile for this project..."
343 echo "package = ghc" >> $(VARFILE)
344 echo "version = $(ProjectVersion)" >> $(VARFILE)
345 echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
346 echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
347 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
348 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
349 echo "GhcHasEditline = $(GhcHasEditline)" >> $(VARFILE)
350 echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
351 echo "XMLDocWays = $(XMLDocWays)" >> $(VARFILE)
352 # We won't actually use xsltproc, but we need to know if it's "" or not
353 echo "XSLTPROC = $(XSLTPROC)" >> $(VARFILE)
354 echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(VARFILE)
355 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(VARFILE)
357 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
358 @echo "Generating a shippable configure script.."
359 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
360 ( cd $(BIN_DIST_DIR); autoreconf )
363 # Tar up the distribution and build a manifest
364 binary-dist :: tar-binary-dist
366 .PHONY: tar-binary-dist
368 ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
369 ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
371 PUBLISH_FILES = $(BIN_DIST_TARBALL)
373 # Upload the distribution and documentation
375 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
376 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
378 PUBLISH_FILES += $(WINDOWS_INSTALLER)
380 binary-dist :: generate-windows-installer
382 .PHONY: generate-windows-installer
383 generate-windows-installer ::
384 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
387 # Upload the distribution and documentation
388 ifneq "$(PublishLocation)" ""
390 make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
393 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
395 .PHONY: publish-binary-dist
396 publish-binary-dist ::
397 @for f in $(PUBLISH_FILES); \
398 do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
401 # You need to "make binddisttest" before publishing the docs, as it
402 # works by publish setting $(prefix) to inside the binddisttest
403 # directory so $(docdir) points to the right place.
405 # We assume that Windows means Cygwin, as we can't just use docdir
406 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
409 ifeq "$(Windows)" "YES"
410 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
412 PUBLISH_DOCDIR = $(docdir)
415 publish-binary-dist ::
416 $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
419 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
421 # -----------------------------------------------------------------------------
422 # Building MacOS installer packages
425 # Create an installer package for /Library/Frameworks/GHC.framework
427 # 'framework-binary-dist'
428 # Create an installer package for GHC.framework encapsulating a
429 # binary-dist to make it relocatable
430 # FIXME: This is only partially implemented so far
432 ifeq "$(darwin_TARGET_OS)" "1"
434 .PHONY: framework-pkg, framework-binary-dist
437 $(MAKE) -C distrib/MacOS framework-pkg
439 framework-binary-dist:
440 $(MAKE) -C distrib/MacOS framework-binary-dist
444 # -----------------------------------------------------------------------------
445 # Building source distributions
452 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
458 # Directory in which we're going to build the src dist
460 SRC_DIST_NAME=ghc-$(ProjectVersion)
461 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
464 # Files to include in source distributions
466 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
468 configure.ac config.guess config.sub configure \
469 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
470 ghc.spec.in extra-gcc-opts.in VERSION boot
472 # -----------------------------------------------------------------------------
473 # Source distributions
475 # A source dist is built from a complete build tree, because we
476 # require some extra files not contained in a darcs checkout: the
477 # output from Happy and Alex, for example.
479 # The steps performed by 'make dist' are as follows:
480 # - create a complete link-tree of the current build tree in /tmp
481 # - run 'make distclean' on that tree
482 # - remove a bunch of other files that we know shouldn't be in the dist
483 # - tar up first the extralibs package, then the main source package
485 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
487 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
488 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
491 echo $(ProjectVersion) >VERSION
496 $(RM) -rf $(SRC_DIST_DIR)
497 $(RM) $(SRC_DIST_NAME).tar.gz
498 mkdir $(SRC_DIST_DIR)
499 ( cd $(SRC_DIST_DIR) \
500 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
501 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
502 && $(MAKE) distclean \
503 && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
504 && $(RM) -rf compiler/stage[123] mk/build.mk \
505 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
507 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
508 $(RM) -rf $(EXTRA_LIBS)
509 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
511 # Upload the distribution(s)
512 # Retrying is to work around buggy firewalls that corrupt large file transfers
514 ifneq "$(PublishLocation)" ""
516 @for i in 0 1 2 3 4 5 6 7 8 9; do \
517 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
518 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
520 @for i in 0 1 2 3 4 5 6 7 8 9; do \
521 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
522 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
526 # -----------------------------------------------------------------------------
530 $(RM) -r ghc-$(ProjectVersion)
531 $(LN_S) . ghc-$(ProjectVersion)
532 $(FIND) ghc-$(ProjectVersion)/compiler \
533 ghc-$(ProjectVersion)/utils \
534 ghc-$(ProjectVersion)/compat \
535 ghc-$(ProjectVersion)/libraries -follow \
536 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
537 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
538 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
539 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
542 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
543 if test "x$$f" != "x"; then \
544 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
547 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
548 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
549 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
550 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
551 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
552 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
554 # -----------------------------------------------------------------------------
557 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
559 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
560 ghc.spec docs/users_guide/ug-book.xml extra-gcc-opts
562 # don't clean config.mk: it's needed when cleaning stuff later on
563 LATE_DIST_CLEAN_FILES += mk/config.mk
565 # VERSION is shipped in a source dist
566 MAINTAINER_CLEAN_FILES += VERSION
569 $(RM) -rf autom4te.cache
572 $(MAKE) -C bindisttest $@
573 if test -d testsuite; then $(MAKE) -C testsuite $@; fi
575 # -----------------------------------------------------------------------------
577 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
580 NO_INSTALL_TARGET=YES
582 include $(TOP)/mk/target.mk
584 # -----------------------------------------------------------------------------