1 ############################################################################
3 # This is the top-level Makefile for GHC
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
16 # bootstrap2 + we build GHC one more time ("stage 3")
19 # Just build up to stage 1
22 # Just build stage 2 (stage 1 must be built)
25 # Just build stage 3 (stage 2 must be built)
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
35 # Make a source dist (WARNING: runs 'make distclean' first)
38 # Builds a binary distribution
41 # Builds an HC-file bundle, for bootstrapping
43 # clean, distclean, maintainer-clean
44 # Increasing levels of cleanliness
46 ############################################################################
49 include $(TOP)/mk/boilerplate.mk
52 # Order is important! It's e.g. necessary to descend into include/
53 # before the rest to have a config.h, etc.
55 # If we're booting from .hc files, swap the order
56 # we descend into subdirs - to boot utils must be before driver.
58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
60 # We can't 'make boot' in libraries until stage1 is built
61 ifeq "$(BootingFromHc)" "YES"
62 SUBDIRS_BUILD = gmp includes rts compat compiler docs utils driver
64 SUBDIRS_BUILD = gmp includes compat utils driver docs compiler rts
67 SUBDIRS = gmp includes compat utils driver docs rts libraries compiler
69 # Sanity check that all the core libraries are in the tree, to catch
70 # failure to run darcs-all.
72 @for d in `cat libraries/core-packages`; do \
73 if test ! -d libraries/$$d; then \
74 echo "Looks like you're missing libraries/$$d,"; \
75 echo "maybe you haven't done './darcs-all get'?"; \
79 @if test ! -e libraries/base/configure; then \
80 echo "Looks like you're missing base's configure script."; \
81 echo "Did you run 'sh boot' at the top level?"; \
85 stage1 : check-packages
86 $(MAKE) -C utils/mkdependC boot
87 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
88 for i in $(SUBDIRS_BUILD); do \
89 echo "------------------------------------------------------------------------"; \
90 echo "== $(MAKE) boot $(MFLAGS);"; \
91 echo " in $(shell pwd)/$$i"; \
92 echo "------------------------------------------------------------------------"; \
93 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
94 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
96 for i in $(SUBDIRS_BUILD); do \
97 echo "------------------------------------------------------------------------"; \
98 echo "== $(MAKE) all $(MFLAGS);"; \
99 echo " in $(shell pwd)/$$i"; \
100 echo "------------------------------------------------------------------------"; \
101 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
102 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
104 $(MAKE) -C libraries boot
105 $(MAKE) -C libraries all
107 stage2 : check-packages
108 $(MAKE) -C compiler boot stage=2
109 $(MAKE) -C compiler stage=2
111 stage3 : check-packages
112 $(MAKE) -C compiler boot stage=3
113 $(MAKE) -C compiler stage=3
115 bootstrap : bootstrap2
120 bootstrap3 : bootstrap2
123 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
124 ifneq "$(WhatGccIsCalled)" ""
125 all :: stamp.inplace-gcc-lib
127 .PHONY: stamp.inplace-gcc-lib
129 # This is a hack to make Cabal able to find ld when we run tests with
130 # the inplace ghc. We should probably install all the gcc stuff in our
131 # tree somewhere, and then have install copy it from there rather than
132 # from the filesystem.
133 stamp.inplace-gcc-lib:
134 $(RM) -r compiler/gcc-lib
135 mkdir compiler/gcc-lib
136 cp $(GccDir)ld.exe compiler/gcc-lib
140 $(RM) -r compiler/gcc-lib
141 $(RM) -f inplace-gcc-lib
147 # -----------------------------------------------------------------------------
150 # We want to install the stage 2 bootstrapped compiler by default, but we let
151 # the user override this by saying 'make install stage=1', for example.
153 INSTALL_STAGE = stage=2
158 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
159 install :: check-packages
160 $(INSTALL_DIR) $(bindir)
161 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
162 for i in $(SUBDIRS); do \
163 echo "------------------------------------------------------------------------"; \
164 echo "== $(MAKE) $@ $(MFLAGS);"; \
165 echo " in $(shell pwd)/$$i"; \
166 echo "------------------------------------------------------------------------"; \
167 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
168 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
171 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
172 # These files need to be in the InstallShield
173 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
174 # in the top-level directory of the distribution
175 INSTALL_DATAS += ANNOUNCE LICENSE README
178 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
179 # and the perl interpreter and dll into the GHC prefix directory.
180 # Gcc and Perl source locations derived from configuration data.
181 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
182 ifneq "$(WhatGccIsCalled)" ""
184 -mkdir $(prefix)/gcc-lib
185 -mkdir $(prefix)/include
186 -mkdir $(prefix)/include/mingw
187 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
188 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
189 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
190 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
191 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
192 -cp $(GccDir)gcc.exe $(prefix)
193 -cp $(GccDir)as.exe $(prefix)/gcc-lib
194 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
195 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
196 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
197 -cp $(GhcDir)../perl.exe $(prefix)
198 -cp $(GhcDir)../perl56.dll $(prefix)
202 # Install gcc-extra-opts
204 @$(INSTALL_DIR) $(libdir)
205 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(libdir)
208 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
209 for i in $(SUBDIRS); do \
210 echo "------------------------------------------------------------------------"; \
211 echo "== $(MAKE) $@ $(MFLAGS);"; \
212 echo " in $(shell pwd)/$$i"; \
213 echo "------------------------------------------------------------------------"; \
214 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
215 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
218 # -----------------------------------------------------------------------------
219 # Making a binary distribution
221 # `dist' `binary-dist'
222 # Create a distribution tar file for this program. The tar file
223 # should be set up so that the file names in the tar file start with
224 # a subdirectory name which is the name of the package it is a
225 # distribution for. This name can include the version number.
227 # For example, the distribution tar file of GCC version 1.40 unpacks
228 # into a subdirectory named `gcc-1.40'.
230 # The easiest way to do this is to create a subdirectory
231 # appropriately named, use ln or cp to install the proper files in
232 # it, and then tar that subdirectory.
234 # The dist target should explicitly depend on all non-source files
235 # that are in the distribution, to make sure they are up to date in
236 # the distribution. See Making Releases.
238 # binary-dist is a GHC addition for binary distributions
242 -rm -rf $(BIN_DIST_DIR)
243 -$(RM) $(BIN_DIST_DIR).tar.gz
245 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
248 $(MAKE) prefix=$(BIN_DIST_DIR) install
251 cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
254 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
255 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
259 BinDistDirs = includes compiler docs rts
261 BIN_DIST_TOP= distrib/Makefile \
262 distrib/configure-bin.ac \
273 ifeq "$(darwin_TARGET_OS)" "1"
274 BIN_DIST_TOP+=mk/fix_install_names.sh
277 .PHONY: binary-dist-pre% binary-dist binary-pack
279 binary-dist:: binary-dist-pre
282 $(MKDIRHIER) $(BIN_DIST_DIR)/mk
283 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
284 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_DIR)/mk/target.mk
285 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
286 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
287 echo '' > $(BIN_DIST_DIR)/mk/compat.mk
288 cp mk/package.mk $(BIN_DIST_DIR)/mk/
289 cp mk/install.mk $(BIN_DIST_DIR)/mk/
290 cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
291 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
292 $(MKDIRHIER) $(BIN_DIST_DIR)/share
295 $(MAKE) -C gmp binary-dist DOING_BIN_DIST=YES
296 $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
297 $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
298 # XXX $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
299 $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
300 $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
301 $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
303 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
306 @for i in $(BIN_DIST_TOP); do \
307 if test -f "$$i"; then \
308 echo cp $$i $(BIN_DIST_DIR); \
309 cp $$i $(BIN_DIST_DIR); \
312 @echo "Configuring the Makefile for this project..."
314 echo "package = ghc" >> $(VARFILE)
315 echo "version = $(ProjectVersion)" >> $(VARFILE)
316 echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
317 echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
318 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
319 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
320 echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE)
321 echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
322 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
323 @echo "Generating a shippable configure script.."
324 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
325 ( cd $(BIN_DIST_DIR); autoreconf )
328 # binary dist'ing the documentation.
329 # The default documentation to build/install is given below; overrideable
330 # via build.mk or the 'make' command-line.
332 # If BINDIST_DOC_WAYS is set, use that
333 # If XMLDocWays is set, use that
334 # Otherwise, figure out what we can build based on configure results
336 ifndef BINDIST_DOC_WAYS
338 ifneq "$(XMLDocWays)" ""
339 BINDIST_DOC_WAYS = $(XMLDocWays)
341 ifneq "$(XSLTPROC)" ""
342 BINDIST_DOC_WAYS = html
344 BINDIST_DOC_WAYS += ps pdf
346 ifneq "$(PDFXMLTEX)" ""
347 BINDIST_DOC_WAYS += pdf
351 BINDIST_DOC_WAYS += ps
358 endif # BINDIST_DOC_WAYS
360 ifneq "$(DIR_DOCBOOK_XSL)" ""
361 .PHONY: binary-dist-doc-%
363 BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
365 binary-dist :: $(BINARY_DIST_DOC_RULES)
367 $(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
368 $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
369 $(MAKE) -C $* $(MFLAGS) install-docs \
371 XMLDocWays="$(BINDIST_DOC_WAYS)" \
372 prefix=$(BIN_DIST_DIR) \
373 exec_prefix=$(BIN_DIST_DIR) \
374 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
375 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
376 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
377 datadir=$(BIN_DIST_DIR)/share
380 .PHONY: binary-dist-doc-%
383 $(MAKE) -C libraries binary-dist
387 # Tar up the distribution and build a manifest
388 binary-dist :: tar-binary-dist
390 .PHONY: tar-binary-dist
392 ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
393 ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
395 PUBLISH_FILES = $(BIN_DIST_TARBALL)
397 # Upload the distribution and documentation
399 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
400 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
402 PUBLISH_FILES += $(WINDOWS_INSTALLER)
404 binary-dist :: generate-windows-installer
406 .PHONY: generate-windows-installer
407 generate-windows-installer ::
408 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
411 # Upload the distribution and documentation
412 ifneq "$(PublishLocation)" ""
413 binary-dist :: publish-binary-dist
416 .PHONY: publish-binary-dist
417 publish-binary-dist ::
418 @for f in $(PUBLISH_FILES); do \
419 for i in 0 1 2 3 4 5 6 7 8 9; do \
420 echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
421 if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
425 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
426 # On Windows, we cannot use absoluate pathnames to rsync, because they look
427 # like remote pathnames ("c:/foo/bar"). Also, the docs reside in doc/
428 # rather than share/, due to prep-bin-dist-mingw.
429 publish-binary-dist ::
430 $(PublishCp) -r $(FPTOOLS_TOP)/$(BIN_DIST_NAME)/doc/html/* $(PublishLocation)/docs
432 publish-binary-dist ::
433 $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
437 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
439 # -----------------------------------------------------------------------------
440 # Building source distributions
447 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
453 # Directory in which we're going to build the src dist
455 SRC_DIST_NAME=ghc-$(ProjectVersion)
456 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
459 # Files to include in source distributions
461 SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS))
463 configure.ac config.guess config.sub configure \
464 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
467 # -----------------------------------------------------------------------------
468 # Source distributions
470 # A source dist is built from a complete build tree, because we
471 # require some extra files not contained in a darcs checkout: the
472 # output from Happy and Alex, for example.
474 # The steps performed by 'make dist' are as follows:
475 # - create a complete link-tree of the current build tree in /tmp
476 # - run 'make distclean' on that tree
477 # - remove a bunch of other files that we know shouldn't be in the dist
478 # - tar up first the extralibs package, then the main source package
480 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
482 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
483 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
486 echo $(ProjectVersion) >VERSION
491 $(RM) -rf $(SRC_DIST_DIR)
492 $(RM) $(SRC_DIST_NAME).tar.gz
493 mkdir $(SRC_DIST_DIR)
494 ( cd $(SRC_DIST_DIR) \
495 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
496 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
497 && $(MAKE) distclean \
498 && $(RM) -rf compiler/stage[123] mk/build.mk \
499 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
501 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
502 $(RM) -rf $(EXTRA_LIBS)
503 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
505 # Upload the distribution(s)
506 # Retrying is to work around buggy firewalls that corrupt large file transfers
508 ifneq "$(PublishLocation)" ""
510 @for i in 0 1 2 3 4 5 6 7 8 9; do \
511 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
512 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
514 @for i in 0 1 2 3 4 5 6 7 8 9; do \
515 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
516 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
520 # -----------------------------------------------------------------------------
524 $(RM) -r ghc-$(ProjectVersion)
525 $(LN_S) . ghc-$(ProjectVersion)
526 $(FIND) ghc-$(ProjectVersion)/compiler \
527 ghc-$(ProjectVersion)/utils \
528 ghc-$(ProjectVersion)/compat \
529 ghc-$(ProjectVersion)/libraries -follow \
530 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
531 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
532 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
533 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
536 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
537 if test "x$$f" != "x"; then \
538 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
541 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
542 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
543 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
544 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
545 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
546 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
548 # -----------------------------------------------------------------------------
551 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
553 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
554 ghc.spec docs/users_guide/ug-book.xml
556 # don't clean config.mk: it's needed when cleaning stuff later on
557 LATE_DIST_CLEAN_FILES += mk/config.mk
559 # VERSION is shipped in a source dist
560 MAINTAINER_CLEAN_FILES += VERSION
563 $(RM) -rf autom4te.cache
566 $(MAKE) -C bindisttest $@
568 # -----------------------------------------------------------------------------
570 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
573 NO_INSTALL_TARGET=YES
575 include $(TOP)/mk/target.mk
577 # -----------------------------------------------------------------------------