1 ############################################################################
3 # This is the top-level Makefile for GHC
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
16 # bootstrap2 + we build GHC one more time ("stage 3")
19 # Just build up to stage 1
22 # Just build stage 2 (stage 1 must be built)
25 # Just build stage 3 (stage 2 must be built)
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
35 # Make a source dist (WARNING: runs 'make distclean' first)
38 # Builds a binary distribution
40 # framework-pkg [MacOS only]
41 # Builds /Library/Frameworks/GHC.framework wrapped into a Mac
44 # framework-binary-dist [MacOS only]
45 # Builds GHC.framework encapsulating a binary distribution
46 # (to give a relocatable framework)
49 # Builds an HC-file bundle, for bootstrapping
51 # clean, distclean, maintainer-clean
52 # Increasing levels of cleanliness
54 ############################################################################
57 include $(TOP)/mk/boilerplate.mk
60 # Order is important! It's e.g. necessary to descend into include/
61 # before the rest to have a config.h, etc.
63 # If we're booting from .hc files, swap the order
64 # we descend into subdirs - to boot utils must be before driver.
66 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
68 # We can't 'make boot' in libraries until stage1 is built
69 ifeq "$(BootingFromHc)" "YES"
70 SUBDIRS_BUILD = gmp includes rts compat compiler docs utils driver
72 SUBDIRS_BUILD = gmp includes compat utils driver docs compiler rts libraries/Cabal/doc
75 SUBDIRS = gmp includes compat utils driver docs rts libraries compiler libraries/Cabal/doc
77 # Sanity check that all the boot libraries are in the tree, to catch
78 # failure to run darcs-all.
80 @ds=`cat libraries/boot-packages`;\
82 if test ! -d libraries/$$d; then \
83 echo "Looks like you're missing libraries/$$d,"; \
84 echo "maybe you haven't done './darcs-all get'?"; \
88 @if test ! -f libraries/base/configure; then \
89 echo "Looks like you're missing base's configure script."; \
90 echo "Did you run 'sh boot' at the top level?"; \
94 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
95 ifneq "$(WhatGccIsCalled)" ""
96 GCC_LIB_DEP = stamp.inplace-gcc-lib
100 stage1 : $(GCC_LIB_DEP) check-packages
101 $(MAKE) -C utils/mkdependC boot
102 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
103 for i in $(SUBDIRS_BUILD); do \
104 echo "------------------------------------------------------------------------"; \
105 echo "== $(MAKE) boot $(MFLAGS);"; \
106 echo " in $(shell pwd)/$$i"; \
107 echo "------------------------------------------------------------------------"; \
108 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
109 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
111 for i in $(SUBDIRS_BUILD); do \
112 echo "------------------------------------------------------------------------"; \
113 echo "== $(MAKE) all $(MFLAGS);"; \
114 echo " in $(shell pwd)/$$i"; \
115 echo "------------------------------------------------------------------------"; \
116 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
117 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
119 $(MAKE) -C libraries boot
120 $(MAKE) -C libraries all
122 stage2 : check-packages
123 $(MAKE) -C compiler boot stage=2
124 $(MAKE) -C compiler stage=2
126 stage3 : check-packages
127 $(MAKE) -C compiler boot stage=3
128 $(MAKE) -C compiler stage=3
130 bootstrap : bootstrap2
135 bootstrap3 : bootstrap2
138 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
139 ifneq "$(WhatGccIsCalled)" ""
140 all :: stamp.inplace-gcc-lib
142 .PHONY: stamp.inplace-gcc-lib
144 # This is a hack to make Cabal able to find ld when we run tests with
145 # the inplace ghc. We should probably install all the gcc stuff in our
146 # tree somewhere, and then have install copy it from there rather than
147 # from the filesystem.
148 stamp.inplace-gcc-lib:
149 $(RM) -r compiler/gcc-lib
150 mkdir compiler/gcc-lib
151 cp $(LD) compiler/gcc-lib
155 $(RM) -r compiler/gcc-lib
156 $(RM) -f inplace-gcc-lib
162 # -----------------------------------------------------------------------------
165 # We want to install the stage 2 bootstrapped compiler by default, but we let
166 # the user override this by saying 'make install stage=1', for example.
168 INSTALL_STAGE = stage=2
174 $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
176 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
177 install :: check-packages
178 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
179 for i in $(SUBDIRS); do \
180 echo "------------------------------------------------------------------------"; \
181 echo "== $(MAKE) $@ $(MFLAGS);"; \
182 echo " in $(shell pwd)/$$i"; \
183 echo "------------------------------------------------------------------------"; \
184 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
185 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
188 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
189 # These files need to be in the InstallShield
190 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
191 # in the top-level directory of the distribution
192 INSTALL_DATAS += ANNOUNCE LICENSE README
195 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
196 # and the perl interpreter and dll into the GHC prefix directory.
197 # Gcc and Perl source locations derived from configuration data.
198 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
199 ifneq "$(WhatGccIsCalled)" ""
201 -mkdir $(prefix)/gcc-lib
202 -mkdir $(prefix)/include
203 -mkdir $(prefix)/include/mingw
204 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
205 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
206 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
207 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
208 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
209 -cp $(GccDir)gcc.exe $(prefix)
210 -cp $(GccDir)as.exe $(prefix)/gcc-lib
211 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
212 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
213 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
214 -cp $(GhcDir)../perl.exe $(prefix)
215 -cp $(GhcDir)../perl56.dll $(prefix)
219 # Install gcc-extra-opts
221 $(INSTALL_DIR) $(DESTDIR)$(libdir)
222 $(INSTALL_DATA) $(INSTALL_OPTS) extra-gcc-opts $(DESTDIR)$(libdir)
225 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
226 for i in $(SUBDIRS); do \
227 echo "------------------------------------------------------------------------"; \
228 echo "== $(MAKE) $@ $(MFLAGS);"; \
229 echo " in $(shell pwd)/$$i"; \
230 echo "------------------------------------------------------------------------"; \
231 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
232 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
235 # -----------------------------------------------------------------------------
236 # Making a binary distribution
238 # `dist' `binary-dist'
239 # Create a distribution tar file for this program. The tar file
240 # should be set up so that the file names in the tar file start with
241 # a subdirectory name which is the name of the package it is a
242 # distribution for. This name can include the version number.
244 # For example, the distribution tar file of GCC version 1.40 unpacks
245 # into a subdirectory named `gcc-1.40'.
247 # The easiest way to do this is to create a subdirectory
248 # appropriately named, use ln or cp to install the proper files in
249 # it, and then tar that subdirectory.
251 # The dist target should explicitly depend on all non-source files
252 # that are in the distribution, to make sure they are up to date in
253 # the distribution. See Making Releases.
255 # binary-dist is a GHC addition for binary distributions
259 -rm -rf $(BIN_DIST_DIR)
260 -$(RM) $(BIN_DIST_TARBALL)
262 # When making bindists, we can have problems if some things (e.g. ghc-pkg)
263 # are compiled with the bootstrapping compiler and some (e.g. the stage 2
264 # compiler) with the stage1 compiler. See #1860 for an example.
265 # Thus we rebuild the utils with stage 1 here. This is a bit unpleasant,
266 # as binary-dist really shouldn't actually build anything, but it works.
267 # We need to do the same for utilities used during library package installation.
269 $(MAKE) -C utils clean
270 $(MAKE) -C utils UseStage1=YES boot
271 $(MAKE) -C utils UseStage1=YES
272 $(RM) -f libraries/ifBuildable/ifBuildable
273 $(MAKE) -C libraries UseStage1=YES ifBuildable/ifBuildable
274 $(RM) -f libraries/installPackage/installPackage
275 $(MAKE) -C libraries UseStage1=YES installPackage/installPackage
277 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
280 $(MAKE) prefix=$(BIN_DIST_DIR) install
281 $(MAKE) prefix=$(BIN_DIST_DIR) install-docs
284 cd $(BIN_DIST_DIR) && $(SHELL) ../distrib/prep-bin-dist-mingw
287 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
288 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
292 BinDistDirs = includes compiler docs rts
294 BIN_DIST_TOP= distrib/Makefile \
295 distrib/configure-bin.ac \
306 ifeq "$(darwin_TARGET_OS)" "1"
307 BIN_DIST_TOP+=mk/fix_install_names.sh
310 .PHONY: binary-dist-pre% binary-dist
312 binary-dist:: binary-dist-pre
315 $(MKDIRHIER) $(BIN_DIST_DIR)/mk
316 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
317 echo 'include $$(TOP)/mk/package.mk' > $(BIN_DIST_DIR)/mk/target.mk
318 echo 'include $$(TOP)/mk/install.mk' >> $(BIN_DIST_DIR)/mk/target.mk
319 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
320 echo '' > $(BIN_DIST_DIR)/mk/compat.mk
321 cp mk/package.mk $(BIN_DIST_DIR)/mk/
322 cp mk/install.mk $(BIN_DIST_DIR)/mk/
323 cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
324 cp mk/fptools.css $(BIN_DIST_DIR)/mk/
325 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
326 $(MKDIRHIER) $(BIN_DIST_DIR)/share
329 $(MAKE) -C gmp binary-dist DOING_BIN_DIST=YES
330 $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
331 $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
332 $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
333 $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
334 $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
335 $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
336 $(MAKE) -C libraries binary-dist DOING_BIN_DIST=YES
337 $(MAKE) -C libraries/Cabal/doc binary-dist DOING_BIN_DIST=YES
339 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
342 @for i in $(BIN_DIST_TOP); do \
343 if test -f "$$i"; then \
344 echo cp $$i $(BIN_DIST_DIR); \
345 cp $$i $(BIN_DIST_DIR); \
348 @echo "Configuring the Makefile for this project..."
350 echo "package = ghc" >> $(VARFILE)
351 echo "version = $(ProjectVersion)" >> $(VARFILE)
352 echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
353 echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
354 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
355 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
356 echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE)
357 echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
358 echo "XMLDocWays = $(XMLDocWays)" >> $(VARFILE)
359 # We won't actually use xsltproc, but we need to know if it's "" or not
360 echo "XSLTPROC = $(XSLTPROC)" >> $(VARFILE)
361 echo "TARGETPLATFORM = $(TARGETPLATFORM)" >> $(VARFILE)
362 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(VARFILE)
364 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
365 @echo "Generating a shippable configure script.."
366 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
367 ( cd $(BIN_DIST_DIR); autoreconf )
370 # Tar up the distribution and build a manifest
371 binary-dist :: tar-binary-dist
373 .PHONY: tar-binary-dist
375 ( cd $(BIN_DIST_TOPDIR_ABS); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
376 ( cd $(BIN_DIST_TOPDIR_ABS); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >$(FPTOOLS_TOP_ABS)/bin-manifest-$(ProjectVersion) )
378 PUBLISH_FILES = $(BIN_DIST_TARBALL)
380 # Upload the distribution and documentation
382 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
383 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
385 PUBLISH_FILES += $(WINDOWS_INSTALLER)
387 binary-dist :: generate-windows-installer
389 .PHONY: generate-windows-installer
390 generate-windows-installer ::
391 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
394 # Upload the distribution and documentation
395 ifneq "$(PublishLocation)" ""
397 make publish-binary-dist 'prefix=$(BIN_DIST_INST_DIR)'
400 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
402 .PHONY: publish-binary-dist
403 publish-binary-dist ::
404 @for f in $(PUBLISH_FILES); \
405 do $(call nTimes,10,$(PublishCp) $$f $(PublishLocation)/dist); \
408 # You need to "make binddisttest" before publishing the docs, as it
409 # works by publish setting $(prefix) to inside the binddisttest
410 # directory so $(docdir) points to the right place.
412 # We assume that Windows means Cygwin, as we can't just use docdir
413 # unchanged or rsync (really SSH?) thinks that c:/foo means /foo on
416 ifeq "$(Windows)" "YES"
417 PUBLISH_DOCDIR = $(shell cygpath --unix $(docdir))
419 PUBLISH_DOCDIR = $(docdir)
422 publish-binary-dist ::
423 $(call nTimes,10,$(PublishCp) -r "$(PUBLISH_DOCDIR)"/* $(PublishLocation)/docs)
426 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
428 # -----------------------------------------------------------------------------
429 # Building MacOS installer packages
432 # Create an installer package for /Library/Frameworks/GHC.framework
434 # 'framework-binary-dist'
435 # Create an installer package for GHC.framework encapsulating a
436 # binary-dist to make it relocatable
437 # FIXME: This is only partially implemented so far
439 ifeq "$(darwin_TARGET_OS)" "1"
441 .PHONY: framework-pkg, framework-binary-dist
444 $(MAKE) -C distrib/MacOS framework-pkg
446 framework-binary-dist:
447 $(MAKE) -C distrib/MacOS framework-binary-dist
451 # -----------------------------------------------------------------------------
452 # Building source distributions
459 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
465 # Directory in which we're going to build the src dist
467 SRC_DIST_NAME=ghc-$(ProjectVersion)
468 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
471 # Files to include in source distributions
473 SRC_DIST_DIRS += mk docs distrib bindisttest $(filter-out docs distrib libraries/Cabal/doc,$(SUBDIRS))
475 configure.ac config.guess config.sub configure \
476 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
477 ghc.spec.in extra-gcc-opts.in VERSION boot
479 # -----------------------------------------------------------------------------
480 # Source distributions
482 # A source dist is built from a complete build tree, because we
483 # require some extra files not contained in a darcs checkout: the
484 # output from Happy and Alex, for example.
486 # The steps performed by 'make dist' are as follows:
487 # - create a complete link-tree of the current build tree in /tmp
488 # - run 'make distclean' on that tree
489 # - remove a bunch of other files that we know shouldn't be in the dist
490 # - tar up first the extralibs package, then the main source package
492 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
494 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
495 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
498 echo $(ProjectVersion) >VERSION
503 $(RM) -rf $(SRC_DIST_DIR)
504 $(RM) $(SRC_DIST_NAME).tar.gz
505 mkdir $(SRC_DIST_DIR)
506 ( cd $(SRC_DIST_DIR) \
507 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
508 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
509 && $(MAKE) distclean \
510 && if test -f $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then $(CP) $(FPTOOLS_TOP_ABS)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
511 && $(RM) -rf compiler/stage[123] mk/build.mk \
512 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
514 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
515 $(RM) -rf $(EXTRA_LIBS)
516 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
518 # Upload the distribution(s)
519 # Retrying is to work around buggy firewalls that corrupt large file transfers
521 ifneq "$(PublishLocation)" ""
523 @for i in 0 1 2 3 4 5 6 7 8 9; do \
524 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
525 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
527 @for i in 0 1 2 3 4 5 6 7 8 9; do \
528 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
529 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
533 # -----------------------------------------------------------------------------
537 $(RM) -r ghc-$(ProjectVersion)
538 $(LN_S) . ghc-$(ProjectVersion)
539 $(FIND) ghc-$(ProjectVersion)/compiler \
540 ghc-$(ProjectVersion)/utils \
541 ghc-$(ProjectVersion)/compat \
542 ghc-$(ProjectVersion)/libraries -follow \
543 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
544 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
545 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
546 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
549 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
550 if test "x$$f" != "x"; then \
551 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
554 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
555 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
556 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
557 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
558 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
559 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
561 # -----------------------------------------------------------------------------
564 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
566 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
567 ghc.spec docs/users_guide/ug-book.xml extra-gcc-opts
569 # don't clean config.mk: it's needed when cleaning stuff later on
570 LATE_DIST_CLEAN_FILES += mk/config.mk
572 # VERSION is shipped in a source dist
573 MAINTAINER_CLEAN_FILES += VERSION
576 $(RM) -rf autom4te.cache
579 $(MAKE) -C bindisttest $@
580 if test -d testsuite; then $(MAKE) -C testsuite $@; fi
582 # -----------------------------------------------------------------------------
584 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
587 NO_INSTALL_TARGET=YES
589 include $(TOP)/mk/target.mk
591 # -----------------------------------------------------------------------------