1 ############################################################################
3 # This is the top-level Makefile for GHC
8 # Builds GHC, then builds the libraries,
9 # then uses this GHC ("stage 1") to build itself
16 # bootstrap2 + we build GHC one more time ("stage 3")
19 # Just build up to stage 1
22 # Just build stage 2 (stage 1 must be built)
25 # Just build stage 3 (stage 2 must be built)
31 # Install everything, including stage 2 compiler by default
32 # (override with stage=3, for example).
35 # Make a source dist (WARNING: runs 'make distclean' first)
38 # Builds a binary distribution
41 # Builds an HC-file bundle, for bootstrapping
43 # clean, distclean, maintainer-clean
44 # Increasing levels of cleanliness
46 ############################################################################
49 include $(TOP)/mk/boilerplate.mk
52 # Order is important! It's e.g. necessary to descend into include/
53 # before the rest to have a config.h, etc.
55 # If we're booting from .hc files, swap the order
56 # we descend into subdirs - to boot utils must be before driver.
58 .PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
60 # We can't 'make boot' in libraries until stage1 is built
61 ifeq "$(BootingFromHc)" "YES"
62 SUBDIRS_BUILD = includes rts compat compiler docs utils driver
64 SUBDIRS_BUILD = includes compat utils driver docs compiler rts
67 # Needed for, e.g., clean
68 SUBDIRS = $(SUBDIRS_BUILD)
70 SUBDIRS_INSTALL = includes compat utils driver docs rts libraries compiler
72 # Sanity check that all the core libraries are in the tree, to catch
73 # failure to run darcs-all.
75 @for d in `cat libraries/core-packages`; do \
76 if test ! -d libraries/$$d; then \
77 echo "Looks like you're missing libraries/$$d,"; \
78 echo "maybe you haven't done './darcs-all get'?"; \
82 @if test ! -e libraries/base/configure; then \
83 echo "Looks like you're missing base's configure script."; \
84 echo "Did you run 'sh boot' at the top level?"; \
88 stage1 : check-packages
89 $(MAKE) -C utils/mkdependC boot
90 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
91 for i in $(SUBDIRS_BUILD); do \
92 echo "------------------------------------------------------------------------"; \
93 echo "== $(MAKE) boot $(MFLAGS);"; \
94 echo " in $(shell pwd)/$$i"; \
95 echo "------------------------------------------------------------------------"; \
96 $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
97 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
99 for i in $(SUBDIRS_BUILD); do \
100 echo "------------------------------------------------------------------------"; \
101 echo "== $(MAKE) all $(MFLAGS);"; \
102 echo " in $(shell pwd)/$$i"; \
103 echo "------------------------------------------------------------------------"; \
104 $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
105 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
107 $(MAKE) -C libraries boot
108 $(MAKE) -C libraries all
110 stage2 : check-packages
111 $(MAKE) -C compiler boot stage=2
112 $(MAKE) -C compiler stage=2
114 stage3 : check-packages
115 $(MAKE) -C compiler boot stage=3
116 $(MAKE) -C compiler stage=3
118 bootstrap : bootstrap2
123 bootstrap3 : bootstrap2
128 # -----------------------------------------------------------------------------
131 # We want to install the stage 2 bootstrapped compiler by default, but we let
132 # the user override this by saying 'make install stage=1', for example.
134 INSTALL_STAGE = stage=2
139 # Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
140 install :: check-packages
141 $(INSTALL_DIR) $(bindir)
142 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
143 for i in $(SUBDIRS_INSTALL); do \
144 echo "------------------------------------------------------------------------"; \
145 echo "== $(MAKE) $@ $(MFLAGS);"; \
146 echo " in $(shell pwd)/$$i"; \
147 echo "------------------------------------------------------------------------"; \
148 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
149 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
152 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
153 # These files need to be in the InstallShield
154 # INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
155 # in the top-level directory of the distribution
156 INSTALL_DATAS += ANNOUNCE LICENSE README
159 # If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
160 # and the perl interpreter and dll into the GHC prefix directory.
161 # Gcc and Perl source locations derived from configuration data.
162 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
163 ifneq "$(WhatGccIsCalled)" ""
165 -mkdir $(prefix)/gcc-lib
166 -mkdir $(prefix)/include
167 -mkdir $(prefix)/include/mingw
168 -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
169 -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
170 -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
171 -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
172 -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
173 -cp $(GccDir)gcc.exe $(prefix)
174 -cp $(GccDir)as.exe $(prefix)/gcc-lib
175 -cp $(GccDir)ld.exe $(prefix)/gcc-lib
176 -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
177 -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
178 -cp $(GhcDir)../perl.exe $(prefix)
179 -cp $(GhcDir)../perl56.dll $(prefix)
184 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
185 for i in $(SUBDIRS_INSTALL); do \
186 echo "------------------------------------------------------------------------"; \
187 echo "== $(MAKE) $@ $(MFLAGS);"; \
188 echo " in $(shell pwd)/$$i"; \
189 echo "------------------------------------------------------------------------"; \
190 $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
191 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
194 # -----------------------------------------------------------------------------
195 # Making a binary distribution
197 # `dist' `binary-dist'
198 # Create a distribution tar file for this program. The tar file
199 # should be set up so that the file names in the tar file start with
200 # a subdirectory name which is the name of the package it is a
201 # distribution for. This name can include the version number.
203 # For example, the distribution tar file of GCC version 1.40 unpacks
204 # into a subdirectory named `gcc-1.40'.
206 # The easiest way to do this is to create a subdirectory
207 # appropriately named, use ln or cp to install the proper files in
208 # it, and then tar that subdirectory.
210 # The dist target should explicitly depend on all non-source files
211 # that are in the distribution, to make sure they are up to date in
212 # the distribution. See Making Releases.
214 # binary-dist is a GHC addition for binary distributions
217 BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2
220 -rm -rf $(BIN_DIST_DIR)
221 -$(RM) $(BIN_DIST_DIR).tar.gz
223 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
226 $(MAKE) prefix=$(BIN_DIST_DIR) install
229 cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
233 BinDistDirs = includes compiler docs rts
235 BIN_DIST_TOP= distrib/Makefile \
236 distrib/configure-bin.ac \
246 ifeq "$(darwin_TARGET_OS)" "1"
247 BIN_DIST_TOP+=mk/fix_install_names.sh
250 .PHONY: binary-dist-pre% binary-dist binary-pack
252 binary-dist:: binary-dist-pre
255 $(MKDIRHIER) $(BIN_DIST_DIR)/mk
256 echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
257 echo 'include $$(TOP)/mk/install.mk' > $(BIN_DIST_DIR)/mk/target.mk
258 echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
259 echo '' > $(BIN_DIST_DIR)/mk/compat.mk
260 cp mk/package.mk $(BIN_DIST_DIR)/mk/
261 cp mk/install.mk $(BIN_DIST_DIR)/mk/
262 cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
263 $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
264 $(MKDIRHIER) $(BIN_DIST_DIR)/share
267 $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
268 $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
269 # XXX $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
270 $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
271 $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
272 $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
274 VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
277 @for i in $(BIN_DIST_TOP); do \
278 if test -f "$$i"; then \
279 echo cp $$i $(BIN_DIST_DIR); \
280 cp $$i $(BIN_DIST_DIR); \
283 @echo "Configuring the Makefile for this project..."
285 echo "package = ghc" >> $(VARFILE)
286 echo "version = $(ProjectVersion)" >> $(VARFILE)
287 echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
288 echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
289 echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
290 echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
291 echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE)
292 echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
293 cat distrib/Makefile-bin-vars.in >> $(VARFILE)
294 @echo "Generating a shippable configure script.."
295 $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
296 ( cd $(BIN_DIST_DIR); autoreconf )
298 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
300 $(MKDIRHIER) $(BIN_DIST_DIR)/icons
301 cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
305 # binary dist'ing the documentation.
306 # The default documentation to build/install is given below; overrideable
307 # via build.mk or the 'make' command-line.
309 # If BINDIST_DOC_WAYS is set, use that
310 # If XMLDocWays is set, use that
311 # Otherwise, figure out what we can build based on configure results
313 ifndef BINDIST_DOC_WAYS
315 ifneq "$(XMLDocWays)" ""
316 BINDIST_DOC_WAYS = $(XMLDocWays)
318 ifneq "$(XSLTPROC)" ""
319 BINDIST_DOC_WAYS = html
321 BINDIST_DOC_WAYS += ps pdf
323 ifneq "$(PDFXMLTEX)" ""
324 BINDIST_DOC_WAYS += pdf
328 BINDIST_DOC_WAYS += ps
335 endif # BINDIST_DOC_WAYS
337 ifneq "$(DIR_DOCBOOK_XSL)" ""
338 .PHONY: binary-dist-doc-%
340 BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
342 binary-dist :: $(BINARY_DIST_DOC_RULES)
344 $(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
345 $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
346 $(MAKE) -C $* $(MFLAGS) install-docs \
348 XMLDocWays="$(BINDIST_DOC_WAYS)" \
349 prefix=$(BIN_DIST_DIR) \
350 exec_prefix=$(BIN_DIST_DIR) \
351 bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
352 libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
353 libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
354 datadir=$(BIN_DIST_DIR)/share
357 .PHONY: binary-dist-doc-%
360 $(MAKE) -C libraries binary-dist
364 # Tar up the distribution and build a manifest
365 binary-dist :: tar-binary-dist
367 .PHONY: tar-binary-dist
369 ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
370 ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
372 PUBLISH_FILES = $(BIN_DIST_TARBALL)
374 # Upload the distribution and documentation
376 WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
377 WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
379 PUBLISH_FILES += $(WINDOWS_INSTALLER)
381 binary-dist :: generate-windows-installer
383 .PHONY: generate-windows-installer
384 generate-windows-installer ::
385 $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
388 # Upload the distribution and documentation
389 ifneq "$(PublishLocation)" ""
390 binary-dist :: publish-binary-dist
393 .PHONY: publish-binary-dist
394 publish-binary-dist ::
395 @for f in $(PUBLISH_FILES); do \
396 for i in 0 1 2 3 4 5 6 7 8 9; do \
397 echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
398 if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
402 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
403 # On Windows, we cannot use absoluate pathnames to rsync, because they look
404 # like remote pathnames ("c:/foo/bar"). Also, the docs reside in doc/
405 # rather than share/, due to prep-bin-dist-mingw.
406 publish-binary-dist ::
407 $(PublishCp) -r $(FPTOOLS_TOP)/$(BIN_DIST_NAME)/doc/html/* $(PublishLocation)/docs
409 publish-binary-dist ::
410 $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
414 @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
416 # -----------------------------------------------------------------------------
417 # Building source distributions
424 # WARNING: `make dist' calls `make distclean' before tarring up the tree.
430 # Directory in which we're going to build the src dist
432 SRC_DIST_NAME=ghc-$(ProjectVersion)
433 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
436 # Files to include in source distributions
438 SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS_INSTALL))
440 configure.ac config.guess config.sub configure \
441 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
444 # -----------------------------------------------------------------------------
445 # Source distributions
447 # A source dist is built from a complete build tree, because we
448 # require some extra files not contained in a darcs checkout: the
449 # output from Happy and Alex, for example.
451 # The steps performed by 'make dist' are as follows:
452 # - create a complete link-tree of the current build tree in /tmp
453 # - run 'make distclean' on that tree
454 # - remove a bunch of other files that we know shouldn't be in the dist
455 # - tar up first the extralibs package, then the main source package
457 EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
459 SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
460 SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
463 echo $(ProjectVersion) >VERSION
468 $(RM) -rf $(SRC_DIST_DIR)
469 $(RM) $(SRC_DIST_NAME).tar.gz
470 mkdir $(SRC_DIST_DIR)
471 ( cd $(SRC_DIST_DIR) \
472 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
473 && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
474 && $(MAKE) distclean \
475 && $(RM) -rf compiler/stage[123] mk/build.mk \
476 && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
478 tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
479 $(RM) -rf $(EXTRA_LIBS)
480 tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
482 # Upload the distribution(s)
483 # Retrying is to work around buggy firewalls that corrupt large file transfers
485 ifneq "$(PublishLocation)" ""
487 @for i in 0 1 2 3 4 5 6 7 8 9; do \
488 echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
489 if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
491 @for i in 0 1 2 3 4 5 6 7 8 9; do \
492 echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
493 if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
497 # -----------------------------------------------------------------------------
501 $(RM) -r ghc-$(ProjectVersion)
502 $(LN_S) . ghc-$(ProjectVersion)
503 $(FIND) ghc-$(ProjectVersion)/compiler \
504 ghc-$(ProjectVersion)/utils \
505 ghc-$(ProjectVersion)/compat \
506 ghc-$(ProjectVersion)/libraries -follow \
507 \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
508 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
509 if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
510 echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
513 for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
514 if test "x$$f" != "x"; then \
515 echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
518 echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
519 echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
520 echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
521 echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
522 echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
523 tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
525 # -----------------------------------------------------------------------------
528 CLEAN_FILES += hc-files-to-go *-hc.tar.gz
530 DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
531 ghc.spec docs/users_guide/ug-book.xml
533 # don't clean config.mk: it's needed when cleaning stuff later on
534 LATE_DIST_CLEAN_FILES += mk/config.mk
536 # VERSION is shipped in a source dist
537 MAINTAINER_CLEAN_FILES += VERSION
540 $(RM) -rf autom4te.cache
542 # -----------------------------------------------------------------------------
544 # Turn off target.mk's rules for 'all', 'boot' and 'install'.
547 NO_INSTALL_TARGET=YES
549 include $(TOP)/mk/target.mk
551 # -----------------------------------------------------------------------------