1 <!DOCTYPE Article PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
3 <Article id="building-guide">
7 <Title>Building the Glasgow Functional Programming Tools Suite</Title>
8 <Author><OtherName>The GHC Team</OtherName></Author>
9 <Address><Email>glasgow-haskell-{users,bugs}@haskell.org</Email></Address>
10 <PubDate>January 2000</PubDate>
15 This guide is intended for people who want to build or modify
16 programs from the Glasgow <Literal>fptools</Literal> suite (as distinct from those
17 who merely want to <Emphasis>run</Emphasis> them). Installation instructions are now provided in the user guide.
21 The bulk of this guide applies to building on Unix systems; see <XRef LinkEnd="winbuild"> for Windows notes.
29 <Sect1 id="sec-getting">
30 <Title>Getting the Glasgow <Literal>fptools</Literal> suite
34 Building the Glasgow tools <Emphasis>can</Emphasis> be complicated, mostly because
35 there are so many permutations of what/why/how, e.g., ``Build Happy
36 with HBC, everything else with GHC, leave out profiling, and test it
37 all on the `real' NoFib programs.'' Yeeps!
41 Happily, such complications don't apply to most people. A few common
42 ``strategies'' serve most purposes. Pick one and proceed
50 <Term><IndexTerm><Primary>Binary distribution</Primary></IndexTerm>Binary distribution.</Term>
53 If your only purpose is to install some of the <Literal>fptools</Literal> suite then the easiest thing to do is to get a binary distribution. In the
54 binary distribution everything is pre-compiled for your particular
55 machine architecture and operating system, so all you should have to
56 do is install the binaries and libraries in suitable places. The user guide
57 describes how to do this.
61 A binary distribution may not work for you for two reasons. First, we
62 may not have built the suite for the particular architecture/OS
63 platform you want. That may be due to lack of time and energy (in
64 which case you can get a source distribution and build from it; see
65 below). Alternatively, it may be because we haven't yet ported the
66 suite to your architecture, in which case you are considerably worse
71 The second reason a binary distribution may not be what you want is
72 if you want to read or modify the souce code.
74 </ListItem></VarListEntry>
76 <Term><IndexTerm><Primary>Source distribution</Primary></IndexTerm>Source distribution.</Term>
80 platform, but (a) you like the warm fuzzy feeling of compiling things
81 yourself; (b) you want to build something ``extra''—e.g., a set of
82 libraries with strictness-analysis turned off; or (c) you want to hack
87 A source distribution contains complete sources for one or more
88 projects in the <Literal>fptools</Literal> suite. Not only that, but
89 the more awkward machine-independent steps are done for you. For
90 example, if you don't have
91 <Command>happy</Command><IndexTerm><Primary>happy</Primary></IndexTerm>
92 you'll find it convenient that the source distribution contains the
93 result of running <Command>happy</Command> on the parser
94 specifications. If you don't want to alter the parser then this saves
95 you having to find and install <Command>happy</Command>. You will
96 still need a working version of GHC (preferably version 4.08+) on your
97 machine in order to compile (most of) the sources, however.
100 </ListItem></VarListEntry>
102 <Term>Build GHC from intermediate C <Filename>.hc</Filename> files<IndexTerm><Primary>hc files</Primary></IndexTerm>:</Term>
106 need a working GHC to use a source distribution. What if you don't
107 have a working GHC? Then you have no choice but to ``bootstrap'' up
108 from the intermediate C (<Filename>.hc</Filename>) files that we provide. Building GHC
109 on an unsupported platform falls into this category. Please see
110 <Xref LinkEnd="sec-booting-from-C">.
114 Once you have built GHC, you can build the other Glasgow tools with
119 In theory, you can (could?) build GHC with another Haskell compiler
120 (e.g., HBC). We haven't tried to do this for ages and it almost
121 certainly doesn't work any more (for tedious reasons).
123 </ListItem></VarListEntry>
125 <Term>The CVS repository.</Term>
128 We make releases infrequently. If you want more up-to-the minute (but
129 less tested) source code then you need to get access to our CVS
133 <para>All the <Literal>fptools</Literal> source code is held in a CVS
134 repository. CVS is a pretty good source-code control system, and best
135 of all it works over the network.</para>
137 <para>The repository holds source code only. It holds no mechanically
138 generated files at all. So if you check out a source tree from CVS
139 you will need to install every utility so that you can build all the
140 derived files from scratch.</para>
142 <para>More information about our CVS repository is available in the
143 <ULink URL="http://www.haskell.org/ghc/cvs-cheat-sheet.html">fptools
144 CVS Cheat Sheet</ULink>.</para>
146 </ListItem></VarListEntry>
150 <para>If you are going to do any building from sources (either from a
151 source distribution or the CVS repository) then you need to read all
152 of this manual in detail.</para>
156 <Sect1 id="sec-build-checks">
157 <Title>Things to check before you start typing</Title>
160 Here's a list of things to check before you get started.
166 <IndexTerm><Primary>Disk space needed</Primary></IndexTerm>
167 Disk space needed: About 40MB (one tenth of one hamburger's worth) of disk
168 space for the most basic binary distribution of GHC; more for some
169 platforms, e.g., Alphas. An extra ``bundle'' (e.g., concurrent Haskell
170 libraries) might take you to up to one fifth of a hamburger. You'll need
171 over 100MB (say, one fifth a hamburger's worth) if you need to build the
172 basic stuff from scratch. All of the above are
173 <Emphasis>estimates</Emphasis> of disk-space needs. (Note: our benchmark hamburger is a standard Double Whopper with Cheese, with an RRP of UKP2.99.)
179 Use an appropriate machine, compilers, and things. SPARC boxes, and
180 PCs running Linux, BSD (any variant), or Solaris are all fully
181 supported. Win32 and HP boxes are in pretty good shape. DEC Alphas
182 running OSF/1, Linux or some BSD variant, MIPS and AIX boxes will need
183 some minimal porting effort before they work (as of 4.06). <Xref
184 LinkEnd="sec-port-info"> gives the full run-down on ports or lack
191 Be sure that the ``pre-supposed'' utilities are installed.
192 <Xref LinkEnd="sec-pre-supposed"> elaborates.
199 If you have any problem when building or installing the Glasgow
200 tools, please check the ``known pitfalls'' (<Xref
201 LinkEnd="sec-build-pitfalls">). Also check the FAQ for the version
202 you're building, which should be available from the relevant download
203 page on the <ULink URL="http://www.haskell.org/ghc/" >GHC web
206 <IndexTerm><Primary>known bugs</Primary></IndexTerm>
207 <IndexTerm><Primary>bugs, known</Primary></IndexTerm>
209 If you feel there is still some shortcoming in our procedure or
210 instructions, please report it.
212 For GHC, please see the bug-reporting section of the GHC Users' Guide
213 (separate document), to maximise the usefulness of your report.
214 <IndexTerm><Primary>bugs, reporting</Primary></IndexTerm>
216 If in doubt, please send a message to
217 <Email>glasgow-haskell-bugs@haskell.org</Email>.
218 <IndexTerm><Primary>bugs, mailing list</Primary></IndexTerm>
228 <Sect1 id="sec-port-info">
229 <Title>What machines the Glasgow tools run on
233 <IndexTerm><Primary>ports, GHC</Primary></IndexTerm>
234 <IndexTerm><Primary>GHC ports</Primary></IndexTerm>
235 <IndexTerm><Primary>supported platforms</Primary></IndexTerm>
236 <IndexTerm><Primary>platforms, supported</Primary></IndexTerm>
237 The main question is whether or not the Haskell compiler (GHC) runs on
242 A ``platform'' is a architecture/manufacturer/operating-system
243 combination, such as <Literal>sparc-sun-solaris2</Literal>. Other common ones are
244 <Literal>alpha-dec-osf2</Literal>, <Literal>hppa1.1-hp-hpux9</Literal>, <Literal>i386-unknown-linux</Literal>,
245 <Literal>i386-unknown-solaris2</Literal>, <Literal>i386-unknown-freebsd</Literal>,
246 <Literal>i386-unknown-cygwin32</Literal>, <Literal>m68k-sun-sunos4</Literal>, <Literal>mips-sgi-irix5</Literal>,
247 <Literal>sparc-sun-sunos4</Literal>, <Literal>sparc-sun-solaris2</Literal>, <Literal>powerpc-ibm-aix</Literal>.
251 Bear in mind that certain ``bundles'', e.g. parallel Haskell, may not
252 work on all machines for which basic Haskell compiling is supported.
256 Some libraries may only work on a limited number of platforms; for
257 example, a sockets library is of no use unless the operating system
258 supports the underlying BSDisms.
262 <Title>What platforms the Haskell compiler (GHC) runs on</Title>
265 <IndexTerm><Primary>fully-supported platforms</Primary></IndexTerm>
266 <IndexTerm><Primary>native-code generator</Primary></IndexTerm>
267 <IndexTerm><Primary>registerised ports</Primary></IndexTerm>
268 <IndexTerm><Primary>unregisterised ports</Primary></IndexTerm>
269 The GHC hierarchy of Porting Goodness: (a) Best is a native-code
270 generator; (b) next best is a ``registerised''
271 port; (c) the bare minimum is an ``unregisterised'' port.
272 (``Unregisterised'' is so terrible that we won't say more about it).
276 We use Sparcs running Solaris 2.7 and x86 boxes running FreeBSD and
277 Linux, so those are the best supported platforms, unsurprisingly.
281 Here's everything that's known about GHC ports. We identify platforms
282 by their ``canonical'' CPU/Manufacturer/OS triple.
289 <Term>alpha-dec-{osf,linux,freebsd,openbsd,netbsd}:</Term>
290 <IndexTerm><Primary>alpha-dec-osf</Primary></IndexTerm>
291 <IndexTerm><Primary>alpha-dec-linux</Primary></IndexTerm>
292 <IndexTerm><Primary>alpha-dec-freebsd</Primary></IndexTerm>
293 <IndexTerm><Primary>alpha-dec-openbsd</Primary></IndexTerm>
294 <IndexTerm><Primary>alpha-dec-netbsd</Primary></IndexTerm>
298 Currently non-working. The last working version (osf[1-3]) is GHC
299 3.02. A small amount of porting effort will be required to get Alpha
300 support into GHC 4.xx, but we don't have easy access to machines right
301 now, and there hasn't been a massive demand for support, so Alphas
302 remain unsupported for the time being. Please get in touch if you
303 either need Alpha support and/or can provide access to boxes.
306 </ListItem></VarListEntry>
308 <Term>sparc-sun-sunos4:</Term>
309 <IndexTerm><Primary>sparc-sun-sunos4</Primary></IndexTerm>
313 Probably works with minor tweaks, hasn't been tested for a while.
316 </ListItem></VarListEntry>
318 <Term>sparc-sun-solaris2:</Term>
319 <IndexTerm><Primary>sparc-sun-solaris2</Primary></IndexTerm>
323 Fully supported, including native-code generator.
326 </ListItem></VarListEntry>
328 <Term>hppa1.1-hp-hpux (HP-PA boxes running HPUX 9.x)</Term>
329 <IndexTerm><Primary>hppa1.1-hp-hpux</Primary></IndexTerm>
333 Works registerised. No native-code generator.
336 </ListItem></VarListEntry>
338 <Term>i386-unknown-linux (PCs running Linux—ELF binary format):</Term>
339 <IndexTerm><Primary>i386-*-linux</Primary></IndexTerm>
342 <para>GHC works registerised, has a native code generator. You
343 <Emphasis>must</Emphasis> have GCC 2.7.x or later. NOTE about
344 <literal>glibc</literal> versions: GHC binaries built on a system
345 running <literal>glibc 2.0</literal> won't work on a system running
346 <literal>glibc 2.1</literal>, and vice versa. In general, don't
347 expect compatibility between <literal>glibc</literal> versions, even
348 if the shared library version hasn't changed.
351 </ListItem></VarListEntry>
353 <Term>i386-unknown-{freebsd,netbsd,openbsd) (PCs running FreeBSD 2.2
354 or higher, NetBSD, and possibly OpenBSD):</Term>
355 <IndexTerm><Primary>i386-unknown-freebsd</Primary></IndexTerm>
356 <IndexTerm><Primary>i386-unknown-netbsd</Primary></IndexTerm>
357 <IndexTerm><Primary>i386-unknown-openbsd</Primary></IndexTerm>
361 GHC works registerised. These systems provide ready-built packages of
362 GHC, so if you just need binaries you're better off just installing
366 </ListItem></VarListEntry>
368 <Term>i386-unknown-cygwin32:</Term>
369 <IndexTerm><Primary>i386-unknown-cygwin32</Primary></IndexTerm>
373 Fully supported under Win9x/NT, including a native code
374 generator. Requires the <Literal>cygwin32</Literal> compatibility
375 library and a healthy collection of GNU tools (i.e., gcc, GNU ld, bash
379 </ListItem></VarListEntry>
381 <Term>mips-sgi-irix5:</Term>
382 <IndexTerm><Primary>mips-sgi-irix[5-6]</Primary></IndexTerm>
386 Port currently doesn't work, needs some minimal porting effort. As
387 usual, we don't have access to machines and there hasn't been an
388 overwhelming demand for this port, but feel free to get in touch.
390 </ListItem></VarListEntry>
393 <Term>powerpc-ibm-aix:</Term>
396 <IndexTerm><Primary>powerpc-ibm-aix</Primary></IndexTerm>
397 Port currently doesn't work, needs some minimal porting effort. As
398 usual, we don't have access to machines and there hasn't been an
399 overwhelming demand for this port, but feel free to get in touch.
401 </ListItem></VarListEntry>
407 Various other systems have had GHC ported to them in the distant past,
408 including various Motorola 68k boxes. The 68k support still remains,
409 but porting to one of these systems will certainly be a non-trivial
416 <Title>What machines the other tools run on</Title>
419 Unless you hear otherwise, the other tools work if GHC works.
427 <Sect1 id="sec-pre-supposed">
428 <Title>Installing pre-supposed utilities
430 <IndexTerm><Primary>pre-supposed utilities</Primary></IndexTerm>
431 <IndexTerm><Primary>utilities, pre-supposed</Primary></IndexTerm></Title>
434 Here are the gory details about some utility programs you may need;
435 <Command>perl</Command>, <Command>gcc</Command> and
436 <command>happy</command> are the only important
437 ones. (PVM<IndexTerm><Primary>PVM</Primary></IndexTerm> is important
438 if you're going for Parallel Haskell.) The
439 <Command>configure</Command><IndexTerm><Primary>configure</Primary></IndexTerm>
440 script will tell you if you are missing something.
448 <IndexTerm><Primary>pre-supposed: Perl</Primary></IndexTerm>
449 <IndexTerm><Primary>Perl, pre-supposed</Primary></IndexTerm>
452 <Emphasis>You have to have Perl to proceed!</Emphasis> Perl is a
453 language quite good for doing shell-scripty tasks that involve lots of
454 text processing. It is pretty easy to install.
458 Perl 5 is required. For Win32 platforms, you should use the binary
459 supplied in the InstallShield (copy it to <filename>cygwin/bin</filename>).
460 The Cygwin-supplied Perl seems not to work (it has problems with line
465 Perl should be put somewhere so that it can be invoked by the
466 <Literal>#!</Literal> script-invoking mechanism. The full
467 pathname may need to be less than 32 characters long on some
471 </ListItem></VarListEntry>
473 <Term>GNU C (<Command>gcc</Command>):</Term>
474 <IndexTerm><Primary>pre-supposed: GCC (GNU C compiler)</Primary></IndexTerm>
475 <IndexTerm><Primary>GCC (GNU C compiler), pre-supposed</Primary></IndexTerm>
479 We recommend using GCC version 2.95.2 on all platforms. Failing that,
480 version 2.7.2 is stable on most platforms. Earlier versions of GCC
481 can be assumed not to work, and versions in between 2.7.2 and 2.95.2
482 (including <command>egcs</command>) have varying degrees of stability
483 depending on the platform.
487 If your GCC dies with ``internal error'' on some GHC source file,
488 please let us know, so we can report it and get things improved.
489 (Exception: on iX86 boxes—you may need to fiddle with GHC's
490 <Option>-monly-N-regs</Option> option; see the User's Guide)
492 </ListItem></VarListEntry>
496 <indexterm><primary>Happy</primary></indexterm>
498 <para>Happy is a parser generator tool for Haskell, and is used to
499 generate GHC's parsers. Happy is written in Haskell, and is a project
500 in the CVS repository (<literal>fptools/happy</literal>). It can be
501 built from source, but bear in mind that you'll need GHC installed in
502 order to build it. To avoid the chicken/egg problem, install a binary
503 distribtion of either Happy or GHC to get started. Happy
504 distributions are available from <ulink
505 url="http://www.haskell.org/happy/">Happy's Web Page</ulink>.
511 <Term>Autoconf:</Term>
512 <IndexTerm><Primary>pre-supposed: Autoconf</Primary></IndexTerm>
513 <IndexTerm><Primary>Autoconf, pre-supposed</Primary></IndexTerm>
516 GNU Autoconf is needed if you intend to build from the CVS sources, it
517 is <Emphasis>not</Emphasis> needed if you just intend to build a
518 standard source distribution.
522 Autoconf builds the <Command>configure</Command> script from
523 <Filename>configure.in</Filename> and <Filename>aclocal.m4</Filename>.
524 If you modify either of these files, you'll need
525 <command>autoconf</command> to rebuild <Filename>configure</Filename>.
528 </ListItem></VarListEntry>
530 <Term><Command>sed</Command></Term>
531 <IndexTerm><Primary>pre-supposed: sed</Primary></IndexTerm>
532 <IndexTerm><Primary>sed, pre-supposed</Primary></IndexTerm>
535 You need a working <Command>sed</Command> if you are going to build
536 from sources. The build-configuration stuff needs it. GNU sed
537 version 2.0.4 is no good! It has a bug in it that is tickled by the
538 build-configuration. 2.0.5 is OK. Others are probably OK too
539 (assuming we don't create too elaborate configure scripts.)
541 </ListItem></VarListEntry>
546 One <Literal>fptools</Literal> project is worth a quick note at this
547 point, because it is useful for all the others:
548 <Literal>glafp-utils</Literal> contains several utilities which aren't
549 particularly Glasgow-ish, but Occasionally Indispensable. Like
550 <Command>lndir</Command> for creating symbolic link trees.
553 <Sect2 id="pre-supposed-gph-tools">
554 <Title>Tools for building parallel GHC (GPH)
561 <Term>PVM version 3:</Term>
562 <IndexTerm><Primary>pre-supposed: PVM3 (Parallel Virtual Machine)</Primary></IndexTerm>
563 <IndexTerm><Primary>PVM3 (Parallel Virtual Machine), pre-supposed</Primary></IndexTerm>
567 PVM is the Parallel Virtual Machine on which Parallel Haskell programs
568 run. (You only need this if you plan to run Parallel Haskell.
569 Concurent Haskell, which runs concurrent threads on a uniprocessor
570 doesn't need it.) Underneath PVM, you can have (for example) a
571 network of workstations (slow) or a multiprocessor box (faster).
575 The current version of PVM is 3.3.11; we use 3.3.7. It is readily
576 available on the net; I think I got it from
577 <Literal>research.att.com</Literal>, in <Filename>netlib</Filename>.
581 A PVM installation is slightly quirky, but easy to do. Just follow
582 the <Filename>Readme</Filename> instructions.
584 </ListItem></VarListEntry>
586 <Term><Command>bash</Command>:</Term>
587 <IndexTerm><Primary>bash, presupposed (Parallel Haskell only)</Primary></IndexTerm>
590 Sadly, the <Command>gr2ps</Command> script, used to convert ``parallelism profiles''
591 to PostScript, is written in Bash (GNU's Bourne Again shell).
592 This bug will be fixed (someday).
594 </ListItem></VarListEntry>
600 <Sect2 id="pre-supposed-doc-tools">
601 <Title>Tools for building the Documentation
605 The following additional tools are required if you want to format the
606 documentation that comes with the <Literal>fptools</Literal> projects:
613 <Term>DocBook:</Term>
614 <IndexTerm><Primary>pre-supposed: DocBook</Primary></IndexTerm>
615 <IndexTerm><Primary>DocBook, pre-supposed</Primary></IndexTerm>
618 All our documentation is written in SGML, using the DocBook DTD.
619 Instructions on installing and configuring the DocBook tools are in the
620 installation guide (in the GHC user guide).
623 </ListItem></VarListEntry>
626 <IndexTerm><Primary>pre-supposed: TeX</Primary></IndexTerm>
627 <IndexTerm><Primary>TeX, pre-supposed</Primary></IndexTerm>
630 A decent TeX distribution is required if you want to produce printable
631 documentation. We recomment teTeX, which includes just about
634 </ListItem></VarListEntry>
640 <Sect2 id="pre-supposed-other-tools">
641 <Title>Other useful tools
647 <IndexTerm><Primary>pre-supposed: flex</Primary></IndexTerm>
648 <IndexTerm><Primary>flex, pre-supposed</Primary></IndexTerm>
652 This is a quite-a-bit-better-than-Lex lexer. Used to build a couple
653 of utilities in <Literal>glafp-utils</Literal>. Depending on your
654 operating system, the supplied <Command>lex</Command> may or may not
655 work; you should get the GNU version.
657 </ListItem></VarListEntry>
664 <Sect1 id="sec-building-from-source">
665 <Title>Building from source
667 <IndexTerm><Primary>Building from source</Primary></IndexTerm>
668 <IndexTerm><Primary>Source, building from</Primary></IndexTerm></Title>
671 You've been rash enough to want to build some of
672 the Glasgow Functional Programming tools (GHC, Happy,
673 nofib, etc.) from source. You've slurped the source,
674 from the CVS repository or from a source distribution, and
675 now you're sitting looking at a huge mound of bits, wondering
680 Gingerly, you type <Command>make</Command>. Wrong already!
684 This rest of this guide is intended for duffers like me, who aren't
685 really interested in Makefiles and systems configurations, but who
686 need a mental model of the interlocking pieces so that they can make
687 them work, extend them consistently when adding new software, and lay
688 hands on them gently when they don't work.
691 <Sect2 id="sec-source-tree">
692 <Title>Your source tree
696 The source code is held in your <Emphasis>source tree</Emphasis>.
697 The root directory of your source tree <Emphasis>must</Emphasis>
698 contain the following directories and files:
707 <Filename>Makefile</Filename>: the root Makefile.
713 <Filename>mk/</Filename>: the directory that contains the
714 main Makefile code, shared by all the
715 <Literal>fptools</Literal> software.
721 <Filename>configure.in</Filename>, <Filename>config.sub</Filename>, <Filename>config.guess</Filename>:
722 these files support the configuration process.
728 <Filename>install-sh</Filename>.
737 All the other directories are individual <Emphasis>projects</Emphasis> of the
738 <Literal>fptools</Literal> system—for example, the Glasgow Haskell Compiler
739 (<Literal>ghc</Literal>), the Happy parser generator (<Literal>happy</Literal>), the <Literal>nofib</Literal> benchmark
740 suite, and so on. You can have zero or more of these. Needless to
741 say, some of them are needed to build others.
745 The important thing to remember is that even if you want only one
746 project (<Literal>happy</Literal>, say), you must have a source tree whose root
747 directory contains <Filename>Makefile</Filename>, <Filename>mk/</Filename>, <Filename>configure.in</Filename>, and the
748 project(s) you want (<Filename>happy/</Filename> in this case). You cannot get by with
749 just the <Filename>happy/</Filename> directory.
756 <IndexTerm><Primary>build trees</Primary></IndexTerm>
757 <IndexTerm><Primary>link trees, for building</Primary></IndexTerm></Title>
760 While you can build a system in the source tree, we don't recommend it.
761 We often want to build multiple versions of our software
762 for different architectures, or with different options (e.g. profiling).
763 It's very desirable to share a single copy of the source code among
768 So for every source tree we have zero or more <Emphasis>build trees</Emphasis>. Each
769 build tree is initially an exact copy of the source tree, except that
770 each file is a symbolic link to the source file, rather than being a
771 copy of the source file. There are ``standard'' Unix utilities that
772 make such copies, so standard that they go by different names:
773 <Command>lndir</Command><IndexTerm><Primary>lndir</Primary></IndexTerm>, <Command>mkshadowdir</Command><IndexTerm><Primary>mkshadowdir</Primary></IndexTerm> are two (If you
774 don't have either, the source distribution includes sources for the
775 X11 <Command>lndir</Command>—check out <Filename>fptools/glafp-utils/lndir</Filename>). See <Xref LinkEnd="sec-storysofar"> for a typical invocation.
779 The build tree does not need to be anywhere near the source tree in
780 the file system. Indeed, one advantage of separating the build tree
781 from the source is that the build tree can be placed in a
782 non-backed-up partition, saving your systems support people from
783 backing up untold megabytes of easily-regenerated, and
784 rapidly-changing, gubbins. The golden rule is that (with a single
785 exception—<XRef LinkEnd="sec-build-config">)
786 <Emphasis>absolutely everything in the build tree is either a symbolic
787 link to the source tree, or else is mechanically generated</Emphasis>.
788 It should be perfectly OK for your build tree to vanish overnight; an
789 hour or two compiling and you're on the road again.
793 You need to be a bit careful, though, that any new files you create
794 (if you do any development work) are in the source tree, not a build tree!
798 Remember, that the source files in the build tree are <Emphasis>symbolic
799 links</Emphasis> to the files in the source tree. (The build tree soon
800 accumulates lots of built files like <Filename>Foo.o</Filename>, as well.) You
801 can <Emphasis>delete</Emphasis> a source file from the build tree without affecting
802 the source tree (though it's an odd thing to do). On the other hand,
803 if you <Emphasis>edit</Emphasis> a source file from the build tree, you'll edit the
804 source-tree file directly. (You can set up Emacs so that if you edit
805 a source file from the build tree, Emacs will silently create an
806 edited copy of the source file in the build tree, leaving the source
807 file unchanged; but the danger is that you think you've edited the
808 source file whereas actually all you've done is edit the build-tree
809 copy. More commonly you do want to edit the source file.)
813 Like the source tree, the top level of your build tree must be (a
814 linked copy of) the root directory of the <Literal>fptools</Literal> suite. Inside
815 Makefiles, the root of your build tree is called
816 <Constant>$(FPTOOLS_TOP)</Constant><IndexTerm><Primary>FPTOOLS_TOP</Primary></IndexTerm>. In the rest of this document path
817 names are relative to <Constant>$(FPTOOLS_TOP)</Constant> unless otherwise stated. For
818 example, the file <Filename>ghc/mk/target.mk</Filename> is actually
819 <Filename><Constant>$(FPTOOLS_TOP)</Constant>/ghc/mk/target.mk</Filename>.
824 <Sect2 id="sec-build-config">
825 <Title>Getting the build you want
829 When you build <Literal>fptools</Literal> you will be compiling code on a particular
830 <Emphasis>host platform</Emphasis>, to run on a particular <Emphasis>target platform</Emphasis>
831 (usually the same as the host platform)<IndexTerm><Primary>platform</Primary></IndexTerm>. The
832 difficulty is that there are minor differences between different
833 platforms; minor, but enough that the code needs to be a bit different
834 for each. There are some big differences too: for a different
835 architecture we need to build GHC with a different native-code
840 There are also knobs you can turn to control how the <Literal>fptools</Literal>
841 software is built. For example, you might want to build GHC optimised
842 (so that it runs fast) or unoptimised (so that you can compile it fast
843 after you've modified it. Or, you might want to compile it with
844 debugging on (so that extra consistency-checking code gets included)
849 All of this stuff is called the <Emphasis>configuration</Emphasis> of your build.
850 You set the configuration using a three-step process.
854 <Term>Step 1: get ready for configuration.</Term>
856 <para>Change directory to
857 <Constant>$(FPTOOLS_TOP)</Constant> and
859 <Command>autoconf</Command><IndexTerm><Primary>autoconf</Primary></IndexTerm>
860 (with no arguments). This GNU program converts
861 <Filename><Constant>$(FPTOOLS_TOP)</Constant>/configure.in</Filename>
862 to a shell script called
863 <Filename><Constant>$(FPTOOLS_TOP)</Constant>/configure</Filename>.
866 <para>Some projects, including GHC, have their own
867 configure script. If there's an
868 <Constant>$(FPTOOLS_TOP)/<project>/configure.in</Constant>,
869 then you need to run <command>autoconf</command> in that
870 directory too.</para>
872 <para>Both these steps are completely
873 platform-independent; they just mean that the
874 human-written file (<Filename>configure.in</Filename>)
875 can be short, although the resulting shell script,
876 <Command>configure</Command>, and
877 <Filename>mk/config.h.in</Filename>, are long.</para>
879 <para>In case you don't have <Command>autoconf</Command>
880 we distribute the results, <Command>configure</Command>,
881 and <Filename>mk/config.h.in</Filename>, with the source
882 distribution. They aren't kept in the repository,
888 <term>Step 2: system configuration.</term>
890 <para>Runs the newly-created
891 <Command>configure</Command> script, thus:</para>
894 ./configure <optional><parameter>args</parameter></optional>
897 <para><Command>configure</Command>'s mission is to
898 scurry round your computer working out what architecture
899 it has, what operating system, whether it has the
900 <Function>vfork</Function> system call, where
901 <Command>yacc</Command> is kept, whether
902 <Command>gcc</Command> is available, where various
903 obscure <Literal>#include</Literal> files are,
904 whether it's a leap year, and what the systems manager
905 had for lunch. It communicates these snippets of
906 information in two ways:</para>
912 <Filename>mk/config.mk.in</Filename><IndexTerm><Primary>config.mk.in</Primary></IndexTerm>
914 <Filename>mk/config.mk</Filename><IndexTerm><Primary>config.mk</Primary></IndexTerm>,
915 substituting for things between
916 ``<Literal>@</Literal>'' brackets. So,
917 ``<Literal>@HaveGcc@</Literal>'' will be replaced by
918 ``<Literal>YES</Literal>'' or
919 ``<Literal>NO</Literal>'' depending on what
920 <Command>configure</Command> finds.
921 <Filename>mk/config.mk</Filename> is included by
922 every Makefile (directly or indirectly), so the
923 configuration information is thereby communicated to
924 all Makefiles.</para>
929 <Filename>mk/config.h.in</Filename><IndexTerm><Primary>config.h.in</Primary></IndexTerm>
931 <Filename>mk/config.h</Filename><IndexTerm><Primary>config.h</Primary></IndexTerm>.
932 The latter is <Literal>#include</Literal>d by
933 various C programs, which can thereby make use of
934 configuration information.</para>
938 <para><command>configure</command> takes some optional
939 arguments. Use <literal>./configure --help</literal> to
940 get a list of the available arguments. Here are some of
941 the ones you might need:</para>
945 <term><literal>--with-ghc=<parameter>path</parameter></literal></term>
946 <indexterm><primary><literal>--with-ghc</literal></primary>
949 <para>Specifies the path to an installed GHC which
950 you would like to use. This compiler will be used
951 for compiling GHC-specific code (eg. GHC itself).
952 This option <emphasis>cannot</emphasis> be
953 specified using <filename>build.mk</filename> (see
954 later), because <command>configure</command> needs
955 to auto-detect the version of GHC you're using.
956 The default is to look for a compiler named
957 <literal>ghc</literal> in your path.</para>
962 <term><literal>--with-hc=<parameter>path</parameter></literal></term>
963 <indexterm><primary><literal>--with-hhc</literal></primary>
966 <para>Specifies the path to any installed Haskell
967 compiler. This compiler will be used for
968 compiling generic Haskell code. The default is to
969 use <literal>ghc</literal>.</para>
974 <para><command>configure</command> caches the results of
975 its run in <Filename>config.cache</Filename>. Quite
976 often you don't want that; you're running
977 <Command>configure</Command> a second time because
978 something has changed. In that case, simply delete
979 <Filename>config.cache</Filename>.</para>
984 <Term>Step 3: build configuration.</Term>
987 Next, you say how this build of <Literal>fptools</Literal> is to differ from the
988 standard defaults by creating a new file <Filename>mk/build.mk</Filename><IndexTerm><Primary>build.mk</Primary></IndexTerm>
989 <Emphasis>in the build tree</Emphasis>. This file is the one and only file you edit
990 in the build tree, precisely because it says how this build differs
991 from the source. (Just in case your build tree does die, you might
992 want to keep a private directory of <Filename>build.mk</Filename> files, and use a
993 symbolic link in each build tree to point to the appropriate one.) So
994 <Filename>mk/build.mk</Filename> never exists in the source tree—you create one in
995 each build tree from the template. We'll discuss what to put in it
998 </ListItem></VarListEntry>
1003 And that's it for configuration. Simple, eh?
1006 <para>What do you put in your build-specific configuration file
1007 <filename>mk/build.mk</filename>? <Emphasis>For almost all
1008 purposes all you will do is put make variable definitions that
1009 override those in</Emphasis>
1010 <filename>mk/config.mk.in</filename>. The whole point of
1011 <filename>mk/config.mk.in</filename>—and its derived
1012 counterpart <filename>mk/config.mk</filename>—is to define
1013 the build configuration. It is heavily commented, as you will
1014 see if you look at it. So generally, what you do is look at
1015 <filename>mk/config.mk.in</filename>, and add definitions in
1016 <filename>mk/build.mk</filename> that override any of the
1017 <filename>config.mk</filename> definitions that you want to
1018 change. (The override occurs because the main boilerplate file,
1019 <filename>mk/boilerplate.mk</filename><IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm>,
1020 includes <filename>build.mk</filename> after
1021 <filename>config.mk</filename>.)</para>
1023 <para>For example, <filename>config.mk.in</filename> contains
1024 the definition:</para>
1027 GhcHcOpts=-O -Rghc-timing
1030 <para>The accompanying comment explains that this is the list of
1031 flags passed to GHC when building GHC itself. For doing
1032 development, it is wise to add <literal>-DDEBUG</literal>, to
1033 enable debugging code. So you would add the following to
1034 <filename>build.mk</filename>:</para>
1036 <para>or, if you prefer,</para>
1039 GhcHcOpts += -DDEBUG
1042 <para>GNU <Command>make</Command> allows existing definitions to
1043 have new text appended using the ``<Literal>+=</Literal>''
1044 operator, which is quite a convenient feature.)</para>
1046 <para>If you want to remove the <literal>-O</literal> as well (a
1047 good idea when developing, because the turn-around cycle gets a
1048 lot quicker), you can just override
1049 <literal>GhcLibHcOpts</literal> altogether:</para>
1052 GhcHcOpts=-DDEBUG -Rghc-timing
1055 <para>When reading <filename>config.mk.in</filename>, remember
1056 that anything between ``@...@'' signs is going to be substituted
1057 by <Command>configure</Command> later. You
1058 <Emphasis>can</Emphasis> override the resulting definition if
1059 you want, but you need to be a bit surer what you are doing.
1060 For example, there's a line that says:</para>
1066 <para>This defines the Make variables <Constant>YACC</Constant>
1067 to the pathname for a <Command>yacc</Command> that
1068 <Command>configure</Command> finds somewhere. If you have your
1069 own pet <Command>yacc</Command> you want to use instead, that's
1070 fine. Just add this line to <filename>mk/build.mk</filename>:</para>
1076 <para>You do not <Emphasis>have</Emphasis> to have a
1077 <filename>mk/build.mk</filename> file at all; if you don't,
1078 you'll get all the default settings from
1079 <filename>mk/config.mk.in</filename>.</para>
1081 <para>You can also use <filename>build.mk</filename> to override
1082 anything that <Command>configure</Command> got wrong. One place
1083 where this happens often is with the definition of
1084 <Constant>FPTOOLS_TOP_ABS</Constant>: this
1085 variable is supposed to be the canonical path to the top of your
1086 source tree, but if your system uses an automounter then the
1087 correct directory is hard to find automatically. If you find
1088 that <Command>configure</Command> has got it wrong, just put the
1089 correct definition in <filename>build.mk</filename>.</para>
1093 <Sect2 id="sec-storysofar">
1094 <Title>The story so far</Title>
1097 Let's summarise the steps you need to carry to get yourself
1098 a fully-configured build tree from scratch.
1107 Get your source tree from somewhere (CVS repository or source
1108 distribution). Say you call the root directory <filename>myfptools</filename> (it
1109 does not have to be called <filename>fptools</filename>). Make sure that you have
1110 the essential files (see <XRef LinkEnd="sec-source-tree">).
1117 Use <Command>lndir</Command> or <Command>mkshadowdir</Command> to create a build tree.
1121 mkshadowdir . /scratch/joe-bloggs/myfptools-sun4
1124 (N.B. <Command>mkshadowdir</Command>'s first argument is taken relative to its second.) You probably want to give the build tree a name that
1125 suggests its main defining characteristic (in your mind at least),
1126 in case you later add others.
1133 Change directory to the build tree. Everything is going
1134 to happen there now.
1137 cd /scratch/joe-bloggs/myfptools-sun4
1145 Prepare for system configuration:
1151 (You can skip this step if you are starting from a source distribution,
1152 and you already have <filename>configure</filename> and <filename>mk/config.h.in</filename>.)
1159 Do system configuration:
1171 Create the file <filename>mk/build.mk</filename>,
1172 adding definitions for your desired configuration options.
1183 You can make subsequent changes to <filename>mk/build.mk</filename> as often
1184 as you like. You do not have to run any further configuration
1185 programs to make these changes take effect.
1186 In theory you should, however, say <Command>gmake clean</Command>, <Command>gmake all</Command>,
1187 because configuration option changes could affect anything—but in practice you are likely to know what's affected.
1193 <Title>Making things</Title>
1195 <para>At this point you have made yourself a fully-configured
1196 build tree, so you are ready to start building real
1199 <para>The first thing you need to know is that <Emphasis>you
1200 must use GNU <Command>make</Command>, usually called
1201 <Command>gmake</Command>, not standard Unix
1202 <Command>make</Command></Emphasis>. If you use standard Unix
1203 <Command>make</Command> you will get all sorts of error messages
1204 (but no damage) because the <Literal>fptools</Literal>
1205 <Command>Makefiles</Command> use GNU <Command>make</Command>'s
1206 facilities extensively.</para>
1208 <para>To just build the whole thing, <command>cd</command> to
1209 the top of your <literal>fptools</literal> tree and type
1210 <command>gmake</command>. This will prepare the tree and build
1211 the various projects in the correct order.</para>
1215 <Sect2 id="sec-standard-targets">
1216 <Title>Standard Targets</title>
1217 <IndexTerm><Primary>targets, standard makefile</Primary></IndexTerm>
1218 <IndexTerm><Primary>makefile targets</Primary></IndexTerm>
1220 <para>In any directory you should be able to make the following:
1225 <Term><Literal>boot</Literal>:</Term>
1227 <para>does the one-off preparation required to get ready for the real
1228 work. Notably, it does <Command>gmake depend</Command> in all
1229 directories that contain programs. It also builds the necessary tools
1230 for compilation to proceed.</para>
1232 <para>Invoking the <literal>boot</literal> target explicitly is not
1233 normally necessary. From the top-level <literal>fptools</literal>
1234 directory, invoking <literal>gmake</literal> causes <literal>gmake
1235 boot all</literal> to be invoked in each of the project
1236 subdirectories, in the order specified by
1237 <literal>$(AllTargets)</literal> in
1238 <literal>config.mk</literal>.</para>
1240 <para>If you're working in a subdirectory somewhere and need to update
1241 the dependencies, <literal>gmake boot</literal> is a good way to do it.</para>
1243 </ListItem></VarListEntry>
1245 <Term><Literal>all</Literal>:</Term>
1248 makes all the final target(s) for this Makefile.
1249 Depending on which directory you are in a ``final target'' may be an
1250 executable program, a library archive, a shell script, or a Postscript
1251 file. Typing <Command>gmake</Command> alone is generally the same as typing <Command>gmake all</Command>.
1253 </ListItem></VarListEntry>
1255 <Term><Literal>install</Literal>:</Term>
1258 installs the things built by <Literal>all</Literal>. Where does it
1259 install them? That is specified by
1260 <filename>mk/config.mk.in</filename>; you can override it in
1261 <filename>mk/build.mk</filename>, or by running
1262 <command>configure</command> with command-line arguments like
1263 <literal>--bindir=/home/simonpj/bin</literal>; see <literal>./configure
1264 --help</literal> for the full details.
1266 </ListItem></VarListEntry>
1268 <Term><Literal>uninstall</Literal>:</Term>
1271 reverses the effect of <Literal>install</Literal>.
1273 </ListItem></VarListEntry>
1276 <Term><Literal>clean</Literal>:</Term>
1279 Delete all files from the current directory that are normally created
1280 by building the program. Don't delete the files that record the
1281 configuration, or files generated by <Command>gmake boot</Command>.
1282 Also preserve files that could be made by building, but normally
1283 aren't because the distribution comes with them.</para>
1284 </ListItem></VarListEntry>
1287 <term><literal>distclean</literal>:</term>
1289 <para>Delete all files from the current directory that are created by
1290 configuring or building the program. If you have unpacked the source
1291 and built the program without creating any other files, <literal>make
1292 distclean</literal> should leave only the files that were in the
1293 distribution.</para>
1298 <term><literal>mostlyclean</literal>:</term>
1300 <para>Like <literal>clean</literal>, but may refrain from deleting a
1301 few files that people normally don't want to recompile.</para>
1306 <Term><Literal>maintainer-clean</Literal>:</Term>
1309 Delete everything from the current directory that can be reconstructed
1310 with this Makefile. This typically includes everything deleted by
1311 <literal>distclean</literal>, plus more: C source files produced by
1312 Bison, tags tables, Info files, and so on.</para>
1314 <para>One exception, however: <literal>make maintainer-clean</literal>
1315 should not delete <filename>configure</filename> even if
1316 <filename>configure</filename> can be remade using a rule in the
1317 <filename>Makefile</filename>. More generally, <literal>make
1318 maintainer-clean</literal> should not delete anything that needs to
1319 exist in order to run <filename>configure</filename> and then begin to
1320 build the program.</para>
1325 <Term><Literal>check</Literal>:</Term>
1330 </ListItem></VarListEntry>
1335 All of these standard targets automatically recurse into
1336 sub-directories. Certain other standard targets do not:
1343 <Term><Literal>configure</Literal>:</Term>
1346 is only available in the root directory
1347 <Constant>$(FPTOOLS_TOP)</Constant>; it has been discussed in <XRef LinkEnd="sec-build-config">.
1349 </ListItem></VarListEntry>
1351 <Term><Literal>depend</Literal>:</Term>
1354 make a <filename>.depend</filename> file in each directory that needs
1355 it. This <filename>.depend</filename> file contains mechanically-generated dependency
1356 information; for example, suppose a directory contains a Haskell
1357 source module <filename>Foo.lhs</filename> which imports another module <Literal>Baz</Literal>.
1358 Then the generated <filename>.depend</filename> file will contain the dependency:
1370 which says that the object file <filename>Foo.o</filename> depends on the interface file
1371 <filename>Baz.hi</filename> generated by compiling module <Literal>Baz</Literal>. The <filename>.depend</filename> file is
1372 automatically included by every Makefile.
1374 </ListItem></VarListEntry>
1376 <Term><Literal>binary-dist</Literal>:</Term>
1379 make a binary distribution. This is the
1380 target we use to build the binary distributions of GHC and Happy.
1382 </ListItem></VarListEntry>
1384 <Term><Literal>dist</Literal>:</Term>
1387 make a source distribution. Note that this target does “make
1388 distclean” as part of its work; don't use it if you want to keep
1391 </ListItem></VarListEntry>
1396 Most <filename>Makefile</filename>s have targets other than these. You can discover them by looking in the <filename>Makefile</filename> itself.
1402 <title>Using a project from the build tree</title>
1404 If you want to build GHC (say) and just use it direct from the build
1405 tree without doing <literal>make install</literal> first, you can run
1406 the in-place driver script:
1407 <filename>ghc/compiler/ghc-inplace</filename>.
1410 <para> Do <emphasis>NOT</emphasis> use
1411 <filename>ghc/compiler/ghc</filename>, or
1412 <filename>ghc/compiler/ghc-5.xx</filename>, as these are the scripts
1413 intended for installation, and contain hard-wired paths to the
1414 installed libraries, rather than the libraries in the build tree.
1418 Happy can similarly be run from the build tree, using
1419 <filename>happy/src/happy-inplace</filename>.
1424 <Title>Fast Making <IndexTerm><Primary>fastmake</Primary></IndexTerm>
1425 <IndexTerm><Primary>dependencies, omitting</Primary></IndexTerm>
1426 <IndexTerm><Primary>FAST, makefile
1427 variable</Primary></IndexTerm></Title>
1430 Sometimes the dependencies get in the way: if you've made a small
1431 change to one file, and you're absolutely sure that it won't affect
1432 anything else, but you know that <Command>make</Command> is going to rebuild everything
1433 anyway, the following hack may be useful:
1445 This tells the make system to ignore dependencies and just build what
1446 you tell it to. In other words, it's equivalent to temporarily
1447 removing the <filename>.depend</filename> file in the current directory (where
1448 <Command>mkdependHS</Command> and friends store their dependency information).
1452 A bit of history: GHC used to come with a <Command>fastmake</Command> script that did
1453 the above job, but GNU make provides the features we need to do it
1454 without resorting to a script. Also, we've found that fastmaking is
1455 less useful since the advent of GHC's recompilation checker (see the
1456 User's Guide section on "Separate Compilation").
1463 <Sect1 id="sec-makefile-arch">
1464 <Title>The <filename>Makefile</filename> architecture
1465 <IndexTerm><Primary>makefile architecture</Primary></IndexTerm></Title>
1468 <Command>make</Command> is great if everything works—you type <Command>gmake install</Command> and
1469 lo! the right things get compiled and installed in the right places.
1470 Our goal is to make this happen often, but somehow it often doesn't;
1471 instead some weird error message eventually emerges from the bowels of
1472 a directory you didn't know existed.
1476 The purpose of this section is to give you a road-map to help you figure
1477 out what is going right and what is going wrong.
1481 <Title>A small project</Title>
1484 To get started, let us look at the <filename>Makefile</filename> for an imaginary small
1485 <Literal>fptools</Literal> project, <Literal>small</Literal>. Each project in <Literal>fptools</Literal> has its own
1486 directory in <Constant>FPTOOLS_TOP</Constant>, so the <Literal>small</Literal> project will have its own
1487 directory <Constant>FPOOLS_TOP/small/</Constant>. Inside the <filename>small/</filename> directory there
1488 will be a <filename>Makefile</filename>, looking something like this:
1492 <IndexTerm><Primary>Makefile, minimal</Primary></IndexTerm>
1495 # Makefile for fptools project "small"
1498 include $(TOP)/mk/boilerplate.mk
1500 SRCS = $(wildcard *.lhs) $(wildcard *.c)
1503 include $(TOP)/target.mk
1509 This <filename>Makefile</filename> has three sections:
1518 The first section includes
1522 One of the most important
1523 features of GNU <Command>make</Command> that we use is the ability for a <filename>Makefile</filename> to
1524 include another named file, very like <Command>cpp</Command>'s <Literal>#include</Literal>
1529 a file of ``boilerplate'' code from the level
1530 above (which in this case will be
1531 <filename><Constant>FPTOOLS_TOP</Constant>/mk/boilerplate.mk</filename><IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm>). As its name
1532 suggests, <filename>boilerplate.mk</filename> consists of a large quantity of standard
1533 <filename>Makefile</filename> code. We discuss this boilerplate in more detail in
1534 <XRef LinkEnd="sec-boiler">.
1535 <IndexTerm><Primary>include, directive in Makefiles</Primary></IndexTerm>
1536 <IndexTerm><Primary>Makefile inclusion</Primary></IndexTerm>
1538 Before the <Literal>include</Literal> statement, you must define the <Command>make</Command> variable
1539 <Constant>TOP</Constant><IndexTerm><Primary>TOP</Primary></IndexTerm> to be the directory containing the <filename>mk</filename> directory in
1540 which the <filename>boilerplate.mk</filename> file is. It is <Emphasis>not</Emphasis> OK to simply say
1544 include ../mk/boilerplate.mk # NO NO NO
1548 Why? Because the <filename>boilerplate.mk</filename> file needs to know where it is, so
1549 that it can, in turn, <Literal>include</Literal> other files. (Unfortunately, when an
1550 <Literal>include</Literal>d file does an <Literal>include</Literal>, the filename is treated relative to
1551 the directory in which <Command>gmake</Command> is being run, not the directory in
1552 which the <Literal>include</Literal>d sits.) In general, <Emphasis>every file <filename>foo.mk</filename>
1553 assumes that <filename><Constant>$(TOP)</Constant>/mk/foo.mk</filename> refers to itself.</Emphasis> It is up to the
1554 <filename>Makefile</filename> doing the <Literal>include</Literal> to ensure this is the case.
1556 Files intended for inclusion in other <filename>Makefile</filename>s are written to have
1557 the following property: <Emphasis>after <filename>foo.mk</filename> is <Literal>include</Literal>d, it leaves
1558 <Constant>TOP</Constant> containing the same value as it had just before the <Literal>include</Literal>
1559 statement</Emphasis>. In our example, this invariant guarantees that the
1560 <Literal>include</Literal> for <filename>target.mk</filename> will look in the same directory as that for
1561 <filename>boilerplate.mk</filename>.
1568 The second section defines the following standard <Command>make</Command>
1569 variables: <Constant>SRCS</Constant><IndexTerm><Primary>SRCS</Primary></IndexTerm> (the source files from which is to be
1570 built), and <Constant>HS_PROG</Constant><IndexTerm><Primary>HS_PROG</Primary></IndexTerm> (the executable binary to be
1571 built). We will discuss in more detail what the ``standard
1572 variables'' are, and how they affect what happens, in <XRef LinkEnd="sec-targets">.
1574 The definition for <Constant>SRCS</Constant> uses the useful GNU <Command>make</Command> construct
1575 <Literal>$(wildcard $pat$)</Literal><IndexTerm><Primary>wildcard</Primary></IndexTerm>, which expands to a list of all
1576 the files matching the pattern <Literal>pat</Literal> in the current directory. In
1577 this example, <Constant>SRCS</Constant> is set to the list of all the <filename>.lhs</filename> and <filename>.c</filename>
1578 files in the directory. (Let's suppose there is one of each,
1579 <filename>Foo.lhs</filename> and <filename>Baz.c</filename>.)
1586 The last section includes a second file of standard code,
1587 called <filename>target.mk</filename><IndexTerm><Primary>target.mk</Primary></IndexTerm>. It contains the rules that tell
1588 <Command>gmake</Command> how to make the standard targets (<Xref LinkEnd="sec-standard-targets">). Why, you ask,
1589 can't this standard code be part of <filename>boilerplate.mk</filename>? Good question.
1590 We discuss the reason later, in <Xref LinkEnd="sec-boiler-arch">.
1592 You do not <Emphasis>have</Emphasis> to <Literal>include</Literal> the <filename>target.mk</filename> file. Instead, you
1593 can write rules of your own for all the standard targets. Usually,
1594 though, you will find quite a big payoff from using the canned rules
1595 in <filename>target.mk</filename>; the price tag is that you have to understand what
1596 canned rules get enabled, and what they do (<Xref LinkEnd="sec-targets">).
1606 In our example <filename>Makefile</filename>, most of the work is done by the two
1607 <Literal>include</Literal>d files. When you say <Command>gmake all</Command>, the following things
1617 <Command>gmake</Command> figures out that the object files are <filename>Foo.o</filename> and
1618 <filename>Baz.o</filename>.
1625 It uses a boilerplate pattern rule to compile <filename>Foo.lhs</filename> to
1626 <filename>Foo.o</filename> using a Haskell compiler. (Which one? That is set in the
1627 build configuration.)
1634 It uses another standard pattern rule to compile <filename>Baz.c</filename> to
1635 <filename>Baz.o</filename>, using a C compiler. (Ditto.)
1642 It links the resulting <filename>.o</filename> files together to make <Literal>small</Literal>,
1643 using the Haskell compiler to do the link step. (Why not use <Command>ld</Command>?
1644 Because the Haskell compiler knows what standard libraries to link in.
1645 How did <Command>gmake</Command> know to use the Haskell compiler to do the link,
1646 rather than the C compiler? Because we set the variable <Constant>HS_PROG</Constant>
1647 rather than <Constant>C_PROG</Constant>.)
1657 All <filename>Makefile</filename>s should follow the above three-section format.
1663 <Title>A larger project</Title>
1666 Larger projects are usually structured into a number of sub-directories,
1667 each of which has its own <filename>Makefile</filename>. (In very large projects, this
1668 sub-structure might be iterated recursively, though that is rare.)
1669 To give you the idea, here's part of the directory structure for
1670 the (rather large) GHC project:
1683 ...source files for documentation...
1686 ...source files for driver...
1689 parser/...source files for parser...
1690 renamer/...source files for renamer...
1697 The sub-directories <filename>docs</filename>, <filename>driver</filename>, <filename>compiler</filename>, and so on, each
1698 contains a sub-component of GHC, and each has its own <filename>Makefile</filename>.
1699 There must also be a <filename>Makefile</filename> in <filename><Constant>$(FPTOOLS_TOP)</Constant>/ghc</filename>. It does most
1700 of its work by recursively invoking <Command>gmake</Command> on the <filename>Makefile</filename>s in the
1701 sub-directories. We say that <filename>ghc/Makefile</filename> is a <Emphasis>non-leaf
1702 <filename>Makefile</filename></Emphasis>, because it does little except organise its children,
1703 while the <filename>Makefile</filename>s in the sub-directories are all <Emphasis>leaf
1704 <filename>Makefile</filename>s</Emphasis>. (In principle the sub-directories might themselves
1705 contain a non-leaf <filename>Makefile</filename> and several sub-sub-directories, but
1706 that does not happen in GHC.)
1710 The <filename>Makefile</filename> in <filename>ghc/compiler</filename> is considered a leaf <filename>Makefile</filename> even
1711 though the <filename>ghc/compiler</filename> has sub-directories, because these sub-directories
1712 do not themselves have <filename>Makefile</filename>s in them. They are just used to structure
1713 the collection of modules that make up GHC, but all are managed by the
1714 single <filename>Makefile</filename> in <filename>ghc/compiler</filename>.
1718 You will notice that <filename>ghc/</filename> also contains a directory <filename>ghc/mk/</filename>. It
1719 contains GHC-specific <filename>Makefile</filename> boilerplate code. More precisely:
1728 <filename>ghc/mk/boilerplate.mk</filename> is included at the top of
1729 <filename>ghc/Makefile</filename>, and of all the leaf <filename>Makefile</filename>s in the
1730 sub-directories. It in turn <Literal>include</Literal>s the main boilerplate file
1731 <filename>mk/boilerplate.mk</filename>.
1739 <filename>ghc/mk/target.mk</filename> is <Literal>include</Literal>d at the bottom of
1740 <filename>ghc/Makefile</filename>, and of all the leaf <filename>Makefile</filename>s in the
1741 sub-directories. It in turn <Literal>include</Literal>s the file <filename>mk/target.mk</filename>.
1751 So these two files are the place to look for GHC-wide customisation
1752 of the standard boilerplate.
1757 <Sect2 id="sec-boiler-arch">
1758 <Title>Boilerplate architecture
1759 <IndexTerm><Primary>boilerplate architecture</Primary></IndexTerm>
1763 Every <filename>Makefile</filename> includes a <filename>boilerplate.mk</filename><IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm> file
1764 at the top, and <filename>target.mk</filename><IndexTerm><Primary>target.mk</Primary></IndexTerm> file at the bottom. In
1765 this section we discuss what is in these files, and why there have to
1766 be two of them. In general:
1775 <filename>boilerplate.mk</filename> consists of:
1781 <Emphasis>Definitions of millions of <Command>make</Command> variables</Emphasis> that
1782 collectively specify the build configuration. Examples:
1783 <Constant>HC_OPTS</Constant><IndexTerm><Primary>HC_OPTS</Primary></IndexTerm>, the options to feed to the Haskell compiler;
1784 <Constant>NoFibSubDirs</Constant><IndexTerm><Primary>NoFibSubDirs</Primary></IndexTerm>, the sub-directories to enable within the
1785 <Literal>nofib</Literal> project; <Constant>GhcWithHc</Constant><IndexTerm><Primary>GhcWithHc</Primary></IndexTerm>, the name of the Haskell
1786 compiler to use when compiling GHC in the <Literal>ghc</Literal> project.
1792 <Emphasis>Standard pattern rules</Emphasis> that tell <Command>gmake</Command> how to construct one
1800 <filename>boilerplate.mk</filename> needs to be <Literal>include</Literal>d at the <Emphasis>top</Emphasis>
1801 of each <filename>Makefile</filename>, so that the user can replace the
1802 boilerplate definitions or pattern rules by simply giving a new
1803 definition or pattern rule in the <filename>Makefile</filename>. <Command>gmake</Command>
1804 simply takes the last definition as the definitive one.
1806 Instead of <Emphasis>replacing</Emphasis> boilerplate definitions, it is also quite
1807 common to <Emphasis>augment</Emphasis> them. For example, a <filename>Makefile</filename> might say:
1815 thereby adding ``<Option>-O</Option>'' to the end of <Constant>SRC_HC_OPTS</Constant><IndexTerm><Primary>SRC_HC_OPTS</Primary></IndexTerm>.
1822 <filename>target.mk</filename> contains <Command>make</Command> rules for the standard
1823 targets described in <Xref LinkEnd="sec-standard-targets">. These rules are selectively included,
1824 depending on the setting of certain <Command>make</Command> variables. These
1825 variables are usually set in the middle section of the
1826 <filename>Makefile</filename> between the two <Literal>include</Literal>s.
1828 <filename>target.mk</filename> must be included at the end (rather than being part of
1829 <filename>boilerplate.mk</filename>) for several tiresome reasons:
1836 <Command>gmake</Command> commits target and dependency lists earlier than
1837 it should. For example, <FIlename>target.mk</FIlename> has a rule that looks like
1842 $(HS_PROG) : $(OBJS)
1843 $(HC) $(LD_OPTS) $< -o $@
1847 If this rule was in <filename>boilerplate.mk</filename> then <Constant>$(HS_PROG)</Constant><IndexTerm><Primary>HS_PROG</Primary></IndexTerm>
1848 and <Constant>$(OBJS)</Constant><IndexTerm><Primary>OBJS</Primary></IndexTerm> would not have their final values at the
1849 moment <Command>gmake</Command> encountered the rule. Alas, <Command>gmake</Command> takes a snapshot
1850 of their current values, and wires that snapshot into the rule. (In
1851 contrast, the commands executed when the rule ``fires'' are only
1852 substituted at the moment of firing.) So, the rule must follow the
1853 definitions given in the <filename>Makefile</filename> itself.
1860 Unlike pattern rules, ordinary rules cannot be overriden or
1861 replaced by subsequent rules for the same target (at least, not without an
1862 error message). Including ordinary rules in <filename>boilerplate.mk</filename> would
1863 prevent the user from writing rules for specific targets in specific cases.
1870 There are a couple of other reasons I've forgotten, but it doesn't
1886 <Sect2 id="sec-boiler">
1887 <Title>The main <filename>mk/boilerplate.mk</filename> file
1889 <IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm></Title>
1892 If you look at <filename><Constant>$(FPTOOLS_TOP)</Constant>/mk/boilerplate.mk</filename> you will find
1893 that it consists of the following sections, each held in a separate
1901 <Term><filename>config.mk</filename><IndexTerm><Primary>config.mk</Primary></IndexTerm></Term>
1904 is the build configuration file we
1905 discussed at length in <Xref LinkEnd="sec-build-config">.
1907 </ListItem></VarListEntry>
1909 <Term><filename>paths.mk</filename><IndexTerm><Primary>paths.mk</Primary></IndexTerm></Term>
1912 defines <Command>make</Command> variables for
1913 pathnames and file lists. In particular, it gives definitions for:
1920 <Term><Constant>SRCS</Constant><IndexTerm><Primary>SRCS</Primary></IndexTerm>:</Term>
1923 all source files in the current directory.
1925 </ListItem></VarListEntry>
1927 <Term><Constant>HS_SRCS</Constant><IndexTerm><Primary>HS_SRCS</Primary></IndexTerm>:</Term>
1930 all Haskell source files in the current directory.
1931 It is derived from <Constant>$(SRCS)</Constant>, so if you override <Constant>SRCS</Constant> with a new value
1932 <Constant>HS_SRCS</Constant> will follow suit.
1934 </ListItem></VarListEntry>
1936 <Term><Constant>C_SRCS</Constant><IndexTerm><Primary>C_SRCS</Primary></IndexTerm>:</Term>
1939 similarly for C source files.
1941 </ListItem></VarListEntry>
1943 <Term><Constant>HS_OBJS</Constant><IndexTerm><Primary>HS_OBJS</Primary></IndexTerm>:</Term>
1946 the <filename>.o</filename> files derived from <Constant>$(HS_SRCS)</Constant>.
1948 </ListItem></VarListEntry>
1950 <Term><Constant>C_OBJS</Constant><IndexTerm><Primary>C_OBJS</Primary></IndexTerm>:</Term>
1953 similarly for <Constant>$(C_SRCS)</Constant>.
1955 </ListItem></VarListEntry>
1957 <Term><Constant>OBJS</Constant><IndexTerm><Primary>OBJS</Primary></IndexTerm>:</Term>
1960 the concatenation of <Constant>$(HS_OBJS)</Constant> and <Constant>$(C_OBJS)</Constant>.
1962 </ListItem></VarListEntry>
1967 Any or all of these definitions can easily be overriden by giving new
1968 definitions in your <filename>Makefile</filename>. For example, if there are things in
1969 the current directory that look like source files but aren't, then
1970 you'll need to set <Constant>SRCS</Constant> manually in your <filename>Makefile</filename>. The other
1971 definitions will then work from this new definition.
1975 What, exactly, does <filename>paths.mk</filename> consider a ``source file'' to be? It's
1976 based on the file's suffix (e.g. <filename>.hs</filename>, <filename>.lhs</filename>, <filename>.c</filename>, <filename>.lc</filename>, etc), but
1977 this is the kind of detail that changes, so rather than
1978 enumerate the source suffices here the best thing to do is to look in
1979 <filename>paths.mk</filename>.
1981 </ListItem></VarListEntry>
1983 <Term><filename>opts.mk</filename><IndexTerm><Primary>opts.mk</Primary></IndexTerm></Term>
1986 defines <Command>make</Command> variables for option
1987 strings to pass to each program. For example, it defines
1988 <Constant>HC_OPTS</Constant><IndexTerm><Primary>HC_OPTS</Primary></IndexTerm>, the option strings to pass to the Haskell
1989 compiler. See <Xref LinkEnd="sec-suffix">.
1991 </ListItem></VarListEntry>
1993 <Term><filename>suffix.mk</filename><IndexTerm><Primary>suffix.mk</Primary></IndexTerm></Term>
1996 defines standard pattern rules—see <Xref LinkEnd="sec-suffix">.
1998 </ListItem></VarListEntry>
2003 Any of the variables and pattern rules defined by the boilerplate file
2004 can easily be overridden in any particular <filename>Makefile</filename>, because the
2005 boilerplate <Literal>include</Literal> comes first. Definitions after this <Literal>include</Literal>
2006 directive simply override the default ones in <filename>boilerplate.mk</filename>.
2011 <Sect2 id="sec-suffix">
2012 <Title>Pattern rules and options
2014 <IndexTerm><Primary>Pattern rules</Primary></IndexTerm></Title>
2017 The file <filename>suffix.mk</filename><IndexTerm><Primary>suffix.mk</Primary></IndexTerm> defines standard <Emphasis>pattern
2018 rules</Emphasis> that say how to build one kind of file from another, for
2019 example, how to build a <filename>.o</filename> file from a <filename>.c</filename> file. (GNU <Command>make</Command>'s
2020 <Emphasis>pattern rules</Emphasis> are more powerful and easier to use than Unix
2021 <Command>make</Command>'s <Emphasis>suffix rules</Emphasis>.)
2025 Almost all the rules look something like this:
2033 $(CC) $(CC_OPTS) -c $< -o $@
2039 Here's how to understand the rule. It says that
2040 <Emphasis>something</Emphasis><filename>.o</filename> (say <filename>Foo.o</filename>) can be built from
2041 <Emphasis>something</Emphasis><filename>.c</filename> (<filename>Foo.c</filename>), by invoking the C compiler
2042 (path name held in <Constant>$(CC)</Constant>), passing to it the options
2043 <Constant>$(CC_OPTS)</Constant> and the rule's dependent file of the rule
2044 <Literal>$<</Literal> (<filename>Foo.c</filename> in this case), and putting the result in
2045 the rule's target <Literal>$@</Literal> (<filename>Foo.o</filename> in this case).
2049 Every program is held in a <Command>make</Command> variable defined in
2050 <filename>mk/config.mk</filename>—look in <filename>mk/config.mk</filename> for the
2051 complete list. One important one is the Haskell compiler, which is
2052 called <Constant>$(HC)</Constant>.
2056 Every program's options are are held in a <Command>make</Command> variables called
2057 <Constant><prog>_OPTS</Constant>. the <Constant><prog>_OPTS</Constant> variables are defined in
2058 <filename>mk/opts.mk</filename>. Almost all of them are defined like this:
2064 CC_OPTS = $(SRC_CC_OPTS) $(WAY$(_way)_CC_OPTS) $($*_CC_OPTS) $(EXTRA_CC_OPTS)
2070 The four variables from which <Constant>CC_OPTS</Constant> is built have the following meaning:
2077 <Term><Constant>SRC_CC_OPTS</Constant><IndexTerm><Primary>SRC_CC_OPTS</Primary></IndexTerm>:</Term>
2080 options passed to all C
2083 </ListItem></VarListEntry>
2085 <Term><Constant>WAY_<way>_CC_OPTS</Constant>:</Term>
2089 compilations for way <Literal><way></Literal>. For example,
2090 <Constant>WAY_mp_CC_OPTS</Constant> gives options to pass to the C compiler when
2091 compiling way <Literal>mp</Literal>. The variable <Constant>WAY_CC_OPTS</Constant> holds
2092 options to pass to the C compiler when compiling the standard way.
2093 (<Xref LinkEnd="sec-ways"> dicusses multi-way
2096 </ListItem></VarListEntry>
2098 <Term><Constant><module>_CC_OPTS</Constant>:</Term>
2102 pass to the C compiler that are specific to module <Literal><module></Literal>. For example, <Constant>SMap_CC_OPTS</Constant> gives the specific options
2103 to pass to the C compiler when compiling <filename>SMap.c</filename>.
2105 </ListItem></VarListEntry>
2107 <Term><Constant>EXTRA_CC_OPTS</Constant><IndexTerm><Primary>EXTRA_CC_OPTS</Primary></IndexTerm>:</Term>
2110 extra options to pass to all
2111 C compilations. This is intended for command line use, thus:
2117 gmake libHS.a EXTRA_CC_OPTS="-v"
2121 </ListItem></VarListEntry>
2127 <Sect2 id="sec-targets">
2128 <Title>The main <filename>mk/target.mk</filename> file
2130 <IndexTerm><Primary>target.mk</Primary></IndexTerm></Title>
2133 <filename>target.mk</filename> contains canned rules for all the standard targets
2134 described in <Xref LinkEnd="sec-standard-targets">. It is complicated by the fact that you don't want all of
2135 these rules to be active in every <filename>Makefile</filename>. Rather than have a
2136 plethora of tiny files which you can include selectively, there is a
2137 single file, <filename>target.mk</filename>, which selectively includes rules based on
2138 whether you have defined certain variables in your <filename>Makefile</filename>. This
2139 section explains what rules you get, what variables control them, and
2140 what the rules do. Hopefully, you will also get enough of an idea of
2141 what is supposed to happen that you can read and understand any weird
2142 special cases yourself.
2149 <Term><Constant>HS_PROG</Constant><IndexTerm><Primary>HS_PROG</Primary></IndexTerm>.</Term>
2152 If <Constant>HS_PROG</Constant> is defined, you get
2153 rules with the following targets:
2157 <Term><filename>HS_PROG</filename><IndexTerm><Primary>HS_PROG</Primary></IndexTerm></Term>
2160 itself. This rule links <Constant>$(OBJS)</Constant>
2161 with the Haskell runtime system to get an executable called
2162 <Constant>$(HS_PROG)</Constant>.
2164 </ListItem></VarListEntry>
2166 <Term><Literal>install</Literal><IndexTerm><Primary>install</Primary></IndexTerm></Term>
2169 installs <Constant>$(HS_PROG)</Constant>
2170 in <Constant>$(bindir)</Constant>.
2172 </ListItem></VarListEntry>
2175 </ListItem></VarListEntry>
2177 <Term><Constant>C_PROG</Constant><IndexTerm><Primary>C_PROG</Primary></IndexTerm></Term>
2180 is similar to <Constant>HS_PROG</Constant>, except that
2181 the link step links <Constant>$(C_OBJS)</Constant> with the C runtime system.
2183 </ListItem></VarListEntry>
2185 <Term><Constant>LIBRARY</Constant><IndexTerm><Primary>LIBRARY</Primary></IndexTerm></Term>
2188 is similar to <Constant>HS_PROG</Constant>, except that
2189 it links <Constant>$(LIB_OBJS)</Constant> to make the library archive <Constant>$(LIBRARY)</Constant>, and
2190 <Literal>install</Literal> installs it in <Constant>$(libdir)</Constant>.
2192 </ListItem></VarListEntry>
2194 <Term><Constant>LIB_DATA</Constant><IndexTerm><Primary>LIB_DATA</Primary></IndexTerm></Term>
2199 </ListItem></VarListEntry>
2201 <Term><Constant>LIB_EXEC</Constant><IndexTerm><Primary>LIB_EXEC</Primary></IndexTerm></Term>
2206 </ListItem></VarListEntry>
2208 <Term><Constant>HS_SRCS</Constant><IndexTerm><Primary>HS_SRCS</Primary></IndexTerm>, <Constant>C_SRCS</Constant><IndexTerm><Primary>C_SRCS</Primary></IndexTerm>.</Term>
2211 If <Constant>HS_SRCS</Constant>
2212 is defined and non-empty, a rule for the target <Literal>depend</Literal> is included,
2213 which generates dependency information for Haskell programs.
2214 Similarly for <Constant>C_SRCS</Constant>.
2216 </ListItem></VarListEntry>
2221 All of these rules are ``double-colon'' rules, thus
2227 install :: $(HS_PROG)
2228 ...how to install it...
2234 GNU <Command>make</Command> treats double-colon rules as separate entities. If there
2235 are several double-colon rules for the same target it takes each in
2236 turn and fires it if its dependencies say to do so. This means that
2237 you can, for example, define both <Constant>HS_PROG</Constant> and <Constant>LIBRARY</Constant>, which will
2238 generate two rules for <Literal>install</Literal>. When you type <Command>gmake install</Command> both
2239 rules will be fired, and both the program and the library will be
2240 installed, just as you wanted.
2245 <Sect2 id="sec-subdirs">
2248 <IndexTerm><Primary>recursion, in makefiles</Primary></IndexTerm>
2249 <IndexTerm><Primary>Makefile, recursing into subdirectories</Primary></IndexTerm></Title>
2252 In leaf <filename>Makefile</filename>s the variable <Constant>SUBDIRS</Constant><IndexTerm><Primary>SUBDIRS</Primary></IndexTerm> is undefined.
2253 In non-leaf <filename>Makefile</filename>s, <Constant>SUBDIRS</Constant> is set to the list of
2254 sub-directories that contain subordinate <filename>Makefile</filename>s. <Emphasis>It is up to
2255 you to set <Constant>SUBDIRS</Constant> in the <filename>Makefile</filename>.</Emphasis> There is no automation here—<Constant>SUBDIRS</Constant> is too important to automate.
2259 When <Constant>SUBDIRS</Constant> is defined, <filename>target.mk</filename> includes a rather
2260 neat rule for the standard targets (<Xref LinkEnd="sec-standard-targets"> that simply invokes
2261 <Command>make</Command> recursively in each of the sub-directories.
2265 <Emphasis>These recursive invocations are guaranteed to occur in the order
2266 in which the list of directories is specified in <Constant>SUBDIRS</Constant>. </Emphasis>This
2267 guarantee can be important. For example, when you say <Command>gmake boot</Command> it
2268 can be important that the recursive invocation of <Command>make boot</Command> is done
2269 in one sub-directory (the include files, say) before another (the
2270 source files). Generally, put the most independent sub-directory
2271 first, and the most dependent last.
2276 <Sect2 id="sec-ways">
2277 <Title>Way management
2279 <IndexTerm><Primary>way management</Primary></IndexTerm></Title>
2282 We sometimes want to build essentially the same system in several
2283 different ``ways''. For example, we want to build GHC's <Literal>Prelude</Literal>
2284 libraries with and without profiling, with and without concurrency,
2285 and so on, so that there is an appropriately-built library archive to
2286 link with when the user compiles his program. It would be possible to
2287 have a completely separate build tree for each such ``way'', but it
2288 would be horribly bureaucratic, especially since often only parts of
2289 the build tree need to be constructed in multiple ways.
2293 Instead, the <filename>target.mk</filename><IndexTerm><Primary>target.mk</Primary></IndexTerm> contains some clever magic to
2294 allow you to build several versions of a system; and to control
2295 locally how many versions are built and how they differ. This section
2300 The files for a particular way are distinguished by munging the
2301 suffix. The ``normal way'' is always built, and its files have the
2302 standard suffices <filename>.o</filename>, <filename>.hi</filename>, and so on. In addition, you can build
2303 one or more extra ways, each distinguished by a <Emphasis>way tag</Emphasis>. The
2304 object files and interface files for one of these extra ways are
2305 distinguished by their suffix. For example, way <Literal>mp</Literal> has files
2306 <filename>.mp_o</filename> and <filename>.mp_hi</filename>. Library archives have their way tag the other
2307 side of the dot, for boring reasons; thus, <filename>libHS_mp.a</filename>.
2311 A <Command>make</Command> variable called <Constant>way</Constant> holds the current way tag. <Emphasis><Constant>way</Constant>
2312 is only ever set on the command line of a recursive invocation of
2313 <Command>gmake</Command>.</Emphasis> It is never set inside a <filename>Makefile</filename>. So it is a global
2314 constant for any one invocation of <Command>gmake</Command>. Two other <Command>make</Command>
2315 variables, <Constant>way_</Constant> and <Constant>_way</Constant> are immediately derived from <Constant>$(way)</Constant> and
2316 never altered. If <Constant>way</Constant> is not set, then neither are <Constant>way_</Constant> and
2317 <Constant>_way</Constant>, and the invocation of <Command>make</Command> will build the ``normal way''.
2318 If <Constant>way</Constant> is set, then the other two variables are set in sympathy.
2319 For example, if <Constant>$(way)</Constant> is ``<Literal>mp</Literal>'', then <Constant>way_</Constant> is set to ``<Literal>mp_</Literal>''
2320 and <Constant>_way</Constant> is set to ``<Literal>_mp</Literal>''. These three variables are then used
2321 when constructing file names.
2325 So how does <Command>make</Command> ever get recursively invoked with <Constant>way</Constant> set? There
2326 are two ways in which this happens:
2335 For some (but not all) of the standard targets, when in a leaf
2336 sub-directory, <Command>make</Command> is recursively invoked for each way tag in
2337 <Constant>$(WAYS)</Constant>. You set <Constant>WAYS</Constant> to the list of way tags you want these
2338 targets built for. The mechanism here is very much like the recursive
2339 invocation of <Command>make</Command> in sub-directories (<Xref LinkEnd="sec-subdirs">).
2341 It is up to you to set <Constant>WAYS</Constant> in your <filename>Makefile</filename>; this is how you
2342 control what ways will get built.
2348 For a useful collection of
2349 targets (such as <filename>libHS_mp.a</filename>, <filename>Foo.mp_o</filename>) there is a rule which
2350 recursively invokes <Command>make</Command> to make the specified target, setting the
2351 <Constant>way</Constant> variable. So if you say <Command>gmake Foo.mp_o</Command> you should see a
2352 recursive invocation <Command>gmake Foo.mp_o way=mp</Command>, and <Emphasis>in this
2353 recursive invocation the pattern rule for compiling a Haskell file
2354 into a <filename>.o</filename> file will match</Emphasis>. The key pattern rules (in <filename>suffix.mk</filename>)
2360 $(HC) $(HC_OPTS) $< -o $@
2375 <Title>When the canned rule isn't right</Title>
2378 Sometimes the canned rule just doesn't do the right thing. For
2379 example, in the <Literal>nofib</Literal> suite we want the link step to print out
2380 timing information. The thing to do here is <Emphasis>not</Emphasis> to define
2381 <Constant>HS_PROG</Constant> or <Constant>C_PROG</Constant>, and instead define a special purpose rule in
2382 your own <filename>Makefile</filename>. By using different variable names you will avoid
2383 the canned rules being included, and conflicting with yours.
2390 <Sect1 id="sec-booting-from-C">
2391 <Title>Booting/porting from C (<filename>.hc</filename>) files
2393 <IndexTerm><Primary>building GHC from .hc files</Primary></IndexTerm>
2394 <IndexTerm><Primary>booting GHC from .hc files</Primary></IndexTerm>
2395 <IndexTerm><Primary>porting GHC</Primary></IndexTerm></Title>
2398 This section is for people trying to get GHC going by using the supplied
2399 intermediate C (<filename>.hc</filename>) files. This would probably be
2400 because no binaries have been provided, or because the machine is not ``fully
2405 The intermediate C files are normally made available together with a source
2406 release, please check the announce message for exact directions of where to
2407 find them. If we haven't made them available or you can't find them, please
2412 Assuming you've got them, unpack them on top of a fresh source tree. This
2413 will place matching <filename>.hc</filename> files next to the corresponding
2414 Haskell source in the compiler subdirectory <filename>ghc</filename> and in
2415 the language package of hslibs (i.e., in <filename>hslibs/lang</filename>).
2416 Then follow the `normal' instructions in <Xref
2417 LinkEnd="sec-building-from-source"> for setting up a build tree.
2421 The actual build process is fully automated by the
2422 <filename>hc-build</filename> script located in the
2423 <filename>distrib</filename> directory. If you eventually want to install GHC
2424 into the directory <filename>INSTALL_DIRECTORY</filename>, the following
2425 command will execute the whole build process (it won't install yet):
2428 foo% distrib/hc-build --prefix=INSTALL_DIRECTORY
2430 <IndexTerm><Primary>--hc-build</Primary></IndexTerm>
2432 By default, the installation directory is <filename>/usr/local</filename>. If
2433 that is what you want, you may omit the argument to
2434 <filename>hc-build</filename>. Generally, any option given to
2435 <filename>hc-build</filename> is passed through to the configuration script
2436 <filename>configure</filename>. If <filename>hc-build</filename>
2437 successfully completes the build process, you can install the resulting
2438 system, as normal, with
2445 That's the mechanics of the boot process, but, of course, if you're
2446 trying to boot on a platform that is not supported and significantly
2447 `different' from any of the supported ones, this is only the start of
2448 the adventure…(ToDo: porting tips—stuff to look out for, etc.)
2453 <Sect1 id="sec-build-pitfalls">
2454 <Title>Known pitfalls in building Glasgow Haskell
2456 <IndexTerm><Primary>problems, building</Primary></IndexTerm>
2457 <IndexTerm><Primary>pitfalls, in building</Primary></IndexTerm>
2458 <IndexTerm><Primary>building pitfalls</Primary></IndexTerm></Title>
2461 WARNINGS about pitfalls and known ``problems'':
2470 One difficulty that comes up from time to time is running out of space
2471 in <literal>TMPDIR</literal>. (It is impossible for the configuration stuff to
2472 compensate for the vagaries of different sysadmin approaches to temp
2474 <IndexTerm><Primary>tmp, running out of space in</Primary></IndexTerm>
2476 The quickest way around it is <Command>setenv TMPDIR /usr/tmp</Command><IndexTerm><Primary>TMPDIR</Primary></IndexTerm> or
2477 even <Command>setenv TMPDIR .</Command> (or the equivalent incantation with your shell
2480 The best way around it is to say
2483 export TMPDIR=<dir>
2486 in your <filename>build.mk</filename> file.
2487 Then GHC and the other <Literal>fptools</Literal> programs will use the appropriate directory
2496 In compiling some support-code bits, e.g., in <filename>ghc/rts/gmp</filename> and even
2497 in <filename>ghc/lib</filename>, you may get a few C-compiler warnings. We think these
2505 When compiling via C, you'll sometimes get ``warning: assignment from
2506 incompatible pointer type'' out of GCC. Harmless.
2513 Similarly, <Command>ar</Command>chiving warning messages like the following are not
2517 ar: filename GlaIOMonad__1_2s.o truncated to GlaIOMonad_
2518 ar: filename GlaIOMonad__2_2s.o truncated to GlaIOMonad_
2528 In compiling the compiler proper (in <filename>compiler/</filename>), you <Emphasis>may</Emphasis>
2529 get an ``Out of heap space'' error message. These can vary with the
2530 vagaries of different systems, it seems. The solution is simple:
2537 If you're compiling with GHC 4.00 or later, then the
2538 <Emphasis>maximum</Emphasis> heap size must have been reached. This
2539 is somewhat unlikely, since the maximum is set to 64M by default.
2540 Anyway, you can raise it with the
2541 <Option>-optCrts-M<size></Option> flag (add this flag to
2542 <Constant><module>_HC_OPTS</Constant>
2543 <Command>make</Command> variable in the appropriate
2544 <filename>Makefile</filename>).
2551 For GHC < 4.00, add a suitable <Option>-H</Option> flag to the <filename>Makefile</filename>, as
2560 and try again: <Command>gmake</Command>. (see <Xref LinkEnd="sec-suffix"> for information about
2561 <Constant><module>_HC_OPTS</Constant>.)
2563 Alternatively, just cut to the chase:
2567 % make EXTRA_HC_OPTS=-optCrts-M128M
2576 If you try to compile some Haskell, and you get errors from GCC about
2577 lots of things from <filename>/usr/include/math.h</filename>, then your GCC was
2578 mis-installed. <Command>fixincludes</Command> wasn't run when it should've been.
2580 As <Command>fixincludes</Command> is now automagically run as part of GCC installation,
2581 this bug also suggests that you have an old GCC.
2589 You <Emphasis>may</Emphasis> need to re-<Command>ranlib</Command><IndexTerm><Primary>ranlib</Primary></IndexTerm> your libraries (on Sun4s).
2593 % cd $(libdir)/ghc-x.xx/sparc-sun-sunos4
2594 % foreach i ( `find . -name '*.a' -print` ) # or other-shell equiv...
2596 ? # or, on some machines: ar s $i
2601 We'd be interested to know if this is still necessary.
2609 GHC's sources go through <Command>cpp</Command> before being compiled, and <Command>cpp</Command> varies
2610 a bit from one Unix to another. One particular gotcha is macro calls
2615 SLIT("Hello, world")
2619 Some <Command>cpp</Command>s treat the comma inside the string as separating two macro
2620 arguments, so you get
2624 :731: macro `SLIT' used with too many (2) args
2628 Alas, <Command>cpp</Command> doesn't tell you the offending file!
2630 Workaround: don't put weird things in string args to <Command>cpp</Command> macros.
2641 <Sect1 id="winbuild"><Title>Notes for building under Windows</Title>
2644 This section summarises how to get the utilities you need on your
2645 Win95/98/NT/2000 machine to use CVS and build GHC. Similar notes for
2646 installing and running GHC may be found in the user guide. In general,
2647 Win95/Win98 behave the same, and WinNT/Win2k behave the same. It is based
2648 largely on detailed advice from Sigbjørn Finne. You should read the
2649 GHC installation guide sections on Windows (in the user guide) before
2650 continuing to read these notes.
2654 <Sect2><Title>Installing ssh</Title>
2660 Extract the whole of <ULink URL="http://research.microsoft.com/~simonpj/ssh-1_2_26-cygwinb19.tar.gz">the ssh archive</ULink> into your <filename>C:\</filename> directory, and use the ``All files'' and ``User folder names'' options in WinZip extract dialogue box. This populates your <filename>C:\usr\local</filename> tree.
2666 Extract <ULink URL="http://research.microsoft.com/~simonpj/cygwinb19.dll.zip">cygwinb19.dll</ULink> into <filename>/usr/local/bin</filename>. The current version
2667 of Cywin is b20, but this version of ssh was compiled with b19.
2673 On a Win2k machine, open up a bash and do
2678 foo$ mkpasswd -l > passwd
2682 Check that your login entry is on the first line
2683 of that file. If not, move it to the top. It's OK
2684 for 'Administrator' to be the first entry, assuming you are one.
2688 However, Win9x doesn't support the calls that <Command>mkpasswd</Command> relies on
2689 (e.g., <Function>NetUserEnum</Function>). If you run <Command>mkpasswd</Command> you
2694 linked to missing export netapi32.dll:NetUserEnum
2698 The passwd file is used
2699 by ssh in a fairly rudimentary manner, so I'd simply
2700 synthesise/copy an existing Unix <filename>/etc/passwd</filename>, i.e., create
2701 an <filename>/etc/passwd</filename> file containing the line
2705 <login>::500:513:::/bin/sh
2709 where <Literal><login></Literal> is your login id.
2715 Generate a key, by running <filename>c:/user/local/bin/ssh-keygen1</filename>.
2716 This generates a public key in <filename>.ssh/identity.pub</filename>, and a
2717 private key in <filename>.ssh/identity</filename>
2721 In response to the 'Enter passphrase' question, just hit
2722 return (i.e. use an empty passphrase). The passphrase is
2723 a password that protects your private key. But it's a pain
2724 to type this passphrase everytime you use <Command>ssh</Command>, so the best
2725 thing to do is simply to protect your <filename>.ssh</filename> directory, and
2726 <filename>.ssh/identity</filename> from access by anyone else. To do this
2727 right-click your <filename>.ssh</filename> directory, and select Properties.
2728 If you are not on the access control list, add yourself, and
2729 give yourself full permissions (the second panel).
2730 Remove everyone else from the access control list. (Don't
2731 leave them there but deny them access, because 'they' may be
2732 a list that includes you!)
2736 If you have problems running <Command>ssh-keygen1</Command>
2737 from within <Command>bash</Command>, start up <filename>cmd.exe</filename> and run it as follows:
2741 c:\tmp> set CYGWIN32=tty
2742 c:\tmp> c:/user/local/bin/ssh-keygen1
2748 If you don't have an account on <Literal>cvs.haskell.org</Literal>, send
2749 your <filename>.ssh/identity.pub</filename> to the CVS repository administrator
2750 (currently Jeff Lewis <Email>jlewis@cse.ogi.edu</Email>). He will set up
2755 If you do have an account on <Literal>cvs.haskell.org</Literal>, use TeraTerm
2756 to logon to it. Once in, copy the
2757 key that <Command>ssh-keygen1</Command> deposited in <filename>/.ssh/identity.pub</filename> into
2758 your <filename>~/.ssh/authorized_keys</filename>. Make sure that the new version
2759 of <filename>authorized_keys</filename> still has 600 file permission.
2768 <Sect2><Title>Installing CVS</Title>
2775 <ULink URL="http://research.microsoft.com/~simonpj/cvs-1_10-win.zip">
2776 CVS</ULink> and, following the instructions in the <filename>README</filename>, copy the
2777 appropriate files into <filename>/usr/local/bin</filename>.
2783 From the System control panel,
2784 set the following <Emphasis>user</Emphasis> environment variables (see the GHC user guide)
2790 <Constant>HOME</Constant>: points to your home directory. This is where CVS
2791 will look for its <filename>.cvsrc</filename> file.
2797 <Constant>CVS_RSH</Constant>: <filename>c:/usr/local/bin/ssh1</filename>
2803 <Constant>CVSROOT</Constant>: <Literal>:ext:username@cvs.haskell.org:/home/cvs/root</Literal>,
2804 where <Literal>username</Literal> is your userid
2810 <Constant>CVSEDITOR</Constant>: <filename>bin/gnuclient.exe</filename> if you want to use an Emacs buffer for typing in those long commit messages.
2818 Put the following in <filename>$HOME/.cvsrc</filename>:
2829 These are the default options for the specified CVS commands,
2830 and represent better defaults than the usual ones. (Feel
2831 free to change them.)
2835 Filenames starting with "<filename>.</filename>" were illegal in
2836 the 8.3 DOS filesystem, but that restriction should have
2837 been lifted by now (i.e., you're using VFAT or later filesystems.) If
2838 you're still having problems creating it, don't worry; <filename>.cvsrc</filename> is entirely
2845 Try doing <Command>cvs co fpconfig</Command>. All being well, bytes should
2846 start to trickle through, leaving a directory <filename>fptools</filename>
2847 in your current directory. (You can <Command>rm</Command> it if you don't want to keep it.) The following messages appear to be harmless:
2851 setsockopt IPTOS_LOWDELAY: Invalid argument
2852 setsockopt IPTOS_THROUGHPUT: Invalid argument
2856 At this point I found that CVS tried to invoke a little dialogue with
2857 me (along the lines of `do you want to talk to this host'), but
2858 somehow bombed out. This was from a bash shell running in emacs.
2859 I solved this by invoking a Cygnus shell, and running CVS from there.
2860 Once things are dialogue free, it seems to work OK from within emacs.
2866 If you want to check out part of large tree, proceed as follows:
2870 cvs -f checkout -l papers
2876 This sequence checks out the <Literal>papers</Literal> module, but none
2877 of its sub-directories.
2878 The "<Option>-l</Option>" flag says not to check out sub-directories.
2879 The "<Option>-f</Option>" flag says not to read the <filename>.cvsrc</filename> file
2880 whose <Option>-P</Option> default (don't check out empty directories) is
2885 The <Command>cvs update</Command> command sucks in a named sub-directory.
2892 There is a very nice graphical front-end to CVS for Win32 platforms,
2893 with a UI that people will be familiar with, at
2894 <ULink URL="http://www.wincvs.org/">wincvs.org</ULink>.
2895 I have not tried it yet.
2901 <Sect2><Title>Installing autoconf</Title>
2904 Only required if you are doing builds from GHC's sources
2905 checked out from the CVS tree.
2911 Fetch the (standard, Unix) <Command>autoconf</Command> distribution from
2912 <ULink URL="ftp://ftp.gnu.org/gnu/autoconf">ftp.gnu.org</ULink>.
2917 Unpack it into an arbitrary directory.
2922 Make sure that the directory <filename>/usr/local/bin</filename> exists.
2927 Say "<filename>./configure</filename>".
2932 Now <Command>make install</Command>. This should put <filename>autoheader</filename>
2933 and <filename>autoconf</filename> in <filename>/usr/local/bin</filename>.
2939 <Command>autoheader</Command> doesn't seem to work, but you don't need it
2946 <Sect2><Title>Building GHC</Title>
2952 In the <filename>./configure</filename> output, ignore
2954 checking whether #! works in shell scripts...
2955 ./configure: ./conftest: No such file or directory</Literal>",
2956 and "<Literal>not updating unwritable cache ./config.cache</Literal>".
2957 Nobody knows why these happen, but they seem to be harmless.
2963 You have to run <Command>autoconf</Command> both in <filename>fptools</filename>
2964 and in <filename>fptools/ghc</filename>. If you omit the latter step you'll
2965 get an error when you run <filename>./configure</filename>:
2970 creating mk/config.h
2971 mk/config.h is unchanged
2973 running /bin/sh ./configure --cache-file=.././config.cache --srcdir=.
2974 ./configure: ./configure: No such file or directory
2975 configure: error: ./configure failed for ghc
2981 You need <filename>ghc</filename> to be in your <Constant>PATH</Constant> before you run
2982 <Command>configure</Command>. The default GHC InstallShield creates only
2983 <filename>ghc-4.08</filename>, so you may need to duplicate this file as <filename>ghc</filename>
2984 in the same directory, in order that <Command>configure</Command> will see it (or
2985 just rename <filename>ghc-4.08</filename> to <filename>ghc</filename>.
2986 And make sure that the directory is in your path.