1 <!DOCTYPE Article PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
7 <Title>Building and Installing the Glasgow Functional Programming Tools Suite</Title>
8 <Author><OtherName>The GHC Team</OtherName></Author>
9 <Address><Email>glasgow-haskell-{users,bugs}@haskell.org</Email></Address>
10 <PubDate>January 2000</PubDate>
15 This guide is intended for people who want to build or modify
16 programs from the Glasgow <Literal>fptools</Literal> suite (as distinct from those
17 who merely want to <Emphasis>run</Emphasis> them). Installation instructions are now provided in the user guide.
21 The bulk of this guide applies to building on Unix systems; see <XRef LinkEnd="winbuild"> for Windows notes.
29 <Sect1 id="sec-getting">
30 <Title>Getting the Glasgow <Literal>fptools</Literal> suite
34 Building the Glasgow tools <Emphasis>can</Emphasis> be complicated, mostly because
35 there are so many permutations of what/why/how, e.g., ``Build Happy
36 with HBC, everything else with GHC, leave out profiling, and test it
37 all on the `real' NoFib programs.'' Yeeps!
41 Happily, such complications don't apply to most people. A few common
42 ``strategies'' serve most purposes. Pick one and proceed
50 <Term><IndexTerm><Primary>Binary distribution</Primary></IndexTerm>Binary distribution.</Term>
53 If your only purpose is to install some of the <Literal>fptools</Literal> suite then the easiest thing to do is to get a binary distribution. In the
54 binary distribution everything is pre-compiled for your particular
55 machine architecture and operating system, so all you should have to
56 do is install the binaries and libraries in suitable places. The user guide
57 describes how to do this.
61 A binary distribution may not work for you for two reasons. First, we
62 may not have built the suite for the particular architecture/OS
63 platform you want. That may be due to lack of time and energy (in
64 which case you can get a source distribution and build from it; see
65 below). Alternatively, it may be because we haven't yet ported the
66 suite to your architecture, in which case you are considerably worse
71 The second reason a binary distribution may not be what you want is
72 if you want to read or modify the souce code.
74 </ListItem></VarListEntry>
76 <Term><IndexTerm><Primary>Source distribution</Primary></IndexTerm>Source distribution.</Term>
80 platform, but (a) you like the warm fuzzy feeling of compiling things
81 yourself; (b) you want to build something ``extra''—e.g., a set of
82 libraries with strictness-analysis turned off; or (c) you want to hack
87 A source distribution contains complete sources for one or more
88 projects in the <Literal>fptools</Literal> suite. Not only that, but the more awkward
89 machine-independent steps are done for you. For example, if you don't
90 have <Command>flex</Command><IndexTerm><Primary>flex</Primary></IndexTerm> you'll find it convenient that the source
91 distribution contains the result of running <Command>flex</Command> on the lexical
92 analyser specification. If you don't want to alter the lexical
93 analyser then this saves you having to find and install <Command>flex</Command>. You
94 will still need a working version of GHC on your machine in order to
95 compile (most of) the sources, however.
99 We make source distributions more frequently than binary
100 distributions; a release that comes with pre-compiled binaries
101 is considered a major release, i.e., a release that we have some
102 confidence will work well by having tested it (more) thoroughly.
106 Source-only distributions are either bugfix releases or snapshots of
107 current state of development. The release has undergone some testing.
108 Source releases of GHC 4.xx can be compiled up using GHC 2.10 or
111 </ListItem></VarListEntry>
113 <Term>Build GHC from intermediate C <Filename>.hc</Filename> files<IndexTerm><Primary>hc files</Primary></IndexTerm>:</Term>
117 need a working GHC to use a source distribution. What if you don't
118 have a working GHC? Then you have no choice but to ``bootstrap'' up
119 from the intermediate C (<Filename>.hc</Filename>) files that we provide. Building GHC
120 on an unsupported platform falls into this category. Please see
121 <Xref LinkEnd="sec-booting-from-C">.
125 Once you have built GHC, you can build the other Glasgow tools with
130 In theory, you can (could?) build GHC with another Haskell compiler
131 (e.g., HBC). We haven't tried to do this for ages and it almost
132 certainly doesn't work any more (for tedious reasons).
134 </ListItem></VarListEntry>
136 <Term>The CVS repository.</Term>
139 We make source distributions slightly more often than binary
140 distributions; but still infrequently. If you want more up-to-the
141 minute (but less tested) source code then you need to get access to
146 All the <Literal>fptools</Literal> source code is held in a CVS repository. CVS is a
147 pretty good source-code control system, and best of all it works over
152 The repository holds source code only. It holds no mechanically
153 generated files at all. So if you check out a source tree from CVS
154 you will need to install every utility so that you can build all the
155 derived files from scratch.
159 More information about our CVS repository is available in the <ULink
160 URL="http://www.haskell.org/ghc/cvs-cheat-sheet.html" >FPTools CVS
161 Cheat Sheet</ULink >.
163 </ListItem></VarListEntry>
168 If you are going to do any building from sources (either from a source
169 distribution or the CVS repository) then you need to read all of this
176 <Title>Things to check before you start typing</Title>
179 Here's a list of things to check before you get started.
185 <IndexTerm><Primary>Disk space needed</Primary></IndexTerm>Disk space needed: About 30MB (five hamburgers' worth) of disk space
186 for the most basic binary distribution of GHC; more for some
187 platforms, e.g., Alphas. An extra ``bundle'' (e.g., concurrent
188 Haskell libraries) might take you to 8–10 hamburgers.
190 You'll need over 100MB (say, 20 hamburgers' worth) if you need to
191 build the basic stuff from scratch.
194 All of the above are <Emphasis>estimates</Emphasis> of disk-space needs. (I don't yet
195 know the disk requirements for the non-GHC tools).
202 Use an appropriate machine, compilers, and things.
204 SPARC boxes, and PCs running Linux, FreeBSD, NetBSD, or Solaris are
205 all fully supported. Win32 and HP boxes are in pretty good shape.
206 DEC Alphas running OSF/1, Linux or some BSD variant, MIPS and AIX
207 boxes will need some minimal porting effort before they work (as of
208 4.06). <Xref LinkEnd="sec-port-info"> gives the full run-down on
209 ports or lack thereof.
216 Be sure that the ``pre-supposed'' utilities are installed.
217 <Xref LinkEnd="sec-pre-supposed"> elaborates.
224 If you have any problem when building or installing the Glasgow
225 tools, please check the ``known pitfalls'' (<Xref
226 LinkEnd="sec-build-pitfalls">). Also check the FAQ for the version
227 you're building, which should be available from the relevant download
228 page on the <ULink URL="http://www.haskell.org/ghc/" >GHC web
231 <IndexTerm><Primary>known bugs</Primary></IndexTerm>
232 <IndexTerm><Primary>bugs, known</Primary></IndexTerm>
234 If you feel there is still some shortcoming in our procedure or
235 instructions, please report it.
237 For GHC, please see the bug-reporting section of the GHC Users' Guide
238 (separate document), to maximise the usefulness of your report.
239 <IndexTerm><Primary>bugs, reporting</Primary></IndexTerm>
241 If in doubt, please send a message to
242 <Email>glasgow-haskell-bugs@haskell.org</Email>.
243 <IndexTerm><Primary>bugs, mailing list</Primary></IndexTerm>
253 <Sect1 id="sec-port-info">
254 <Title>What machines the Glasgow tools run on
258 <IndexTerm><Primary>ports, GHC</Primary></IndexTerm>
259 <IndexTerm><Primary>GHC ports</Primary></IndexTerm>
260 <IndexTerm><Primary>supported platforms</Primary></IndexTerm>
261 <IndexTerm><Primary>platforms, supported</Primary></IndexTerm>
262 The main question is whether or not the Haskell compiler (GHC) runs on
267 A ``platform'' is a architecture/manufacturer/operating-system
268 combination, such as <Literal>sparc-sun-solaris2</Literal>. Other common ones are
269 <Literal>alpha-dec-osf2</Literal>, <Literal>hppa1.1-hp-hpux9</Literal>, <Literal>i386-unknown-linux</Literal>,
270 <Literal>i386-unknown-solaris2</Literal>, <Literal>i386-unknown-freebsd</Literal>,
271 <Literal>i386-unknown-cygwin32</Literal>, <Literal>m68k-sun-sunos4</Literal>, <Literal>mips-sgi-irix5</Literal>,
272 <Literal>sparc-sun-sunos4</Literal>, <Literal>sparc-sun-solaris2</Literal>, <Literal>powerpc-ibm-aix</Literal>.
276 Bear in mind that certain ``bundles'', e.g. parallel Haskell, may not
277 work on all machines for which basic Haskell compiling is supported.
281 Some libraries may only work on a limited number of platforms; for
282 example, a sockets library is of no use unless the operating system
283 supports the underlying BSDisms.
287 <Title>What platforms the Haskell compiler (GHC) runs on</Title>
290 <IndexTerm><Primary>fully-supported platforms</Primary></IndexTerm>
291 <IndexTerm><Primary>native-code generator</Primary></IndexTerm>
292 <IndexTerm><Primary>registerised ports</Primary></IndexTerm>
293 <IndexTerm><Primary>unregisterised ports</Primary></IndexTerm>
294 The GHC hierarchy of Porting Goodness: (a) Best is a native-code
295 generator; (b) next best is a ``registerised''
296 port; (c) the bare minimum is an ``unregisterised'' port.
297 (``Unregisterised'' is so terrible that we won't say more about it).
301 The native code generator is currently non-functional (as of GHC
302 version 4.06), but we're actively working on getting it going again.
306 We use Sparcs running Solaris 2.7 and x86 boxes running FreeBSD and
307 Linux, so those are the best supported platforms, unsurprisingly.
311 Here's everything that's known about GHC ports. We identify platforms
312 by their ``canonical'' CPU/Manufacturer/OS triple.
319 <Term>alpha-dec-{osf,linux,freebsd,openbsd,netbsd}:</Term>
320 <IndexTerm><Primary>alpha-dec-osf</Primary></IndexTerm>
321 <IndexTerm><Primary>alpha-dec-linux</Primary></IndexTerm>
322 <IndexTerm><Primary>alpha-dec-freebsd</Primary></IndexTerm>
323 <IndexTerm><Primary>alpha-dec-openbsd</Primary></IndexTerm>
324 <IndexTerm><Primary>alpha-dec-netbsd</Primary></IndexTerm>
328 Currently non-working. The last working version (osf[1-3]) is GHC
329 3.02. A small amount of porting effort will be required to get Alpha
330 support into GHC 4.xx, but we don't have easy access to machines right
331 now, and there hasn't been a massive demand for support, so Alphas
332 remain unsupported for the time being. Please get in touch if you
333 either need Alpha support and/or can provide access to boxes.
336 </ListItem></VarListEntry>
338 <Term>sparc-sun-sunos4:</Term>
339 <IndexTerm><Primary>sparc-sun-sunos4</Primary></IndexTerm>
343 Probably works with minor tweaks, hasn't been tested for a while.
346 </ListItem></VarListEntry>
348 <Term>sparc-sun-solaris2:</Term>
349 <IndexTerm><Primary>sparc-sun-solaris2</Primary></IndexTerm>
353 Fully supported, including native-code generator.
356 </ListItem></VarListEntry>
358 <Term>hppa1.1-hp-hpux (HP-PA boxes running HPUX 9.x)</Term>
359 <IndexTerm><Primary>hppa1.1-hp-hpux</Primary></IndexTerm>
363 Works registerised. No native-code generator.
366 </ListItem></VarListEntry>
368 <Term>i386-unknown-linux (PCs running Linux—ELF binary format):</Term>
369 <IndexTerm><Primary>i386-*-linux</Primary></IndexTerm>
373 GHC works registerised. You <Emphasis>must</Emphasis> have GCC 2.7.x
374 or later. NOTE about <literal>glibc</literal> versions: GHC binaries
375 built on a system running <literal>glibc 2.0</literal> won't work on a
376 system running <literal>glibc 2.1</literal>, and vice version. In
377 general, don't expect compatibility between <literal>glibc</literal>
378 versions, even if the shared library version hasn't changed.
381 </ListItem></VarListEntry>
383 <Term>i386-unknown-{freebsd,netbsd,openbsd) (PCs running FreeBSD 2.2
384 or higher, NetBSD, and possibly OpenBSD):</Term>
385 <IndexTerm><Primary>i386-unknown-freebsd</Primary></IndexTerm>
386 <IndexTerm><Primary>i386-unknown-netbsd</Primary></IndexTerm>
387 <IndexTerm><Primary>i386-unknown-openbsd</Primary></IndexTerm>
391 GHC works registerised. These systems provide ready-built packages of
392 GHC, so if you just need binaries you're better off just installing
396 </ListItem></VarListEntry>
398 <Term>i386-unknown-cygwin32:</Term>
399 <IndexTerm><Primary>i386-unknown-cygwin32</Primary></IndexTerm>
403 Fully supported under Win9x/NT, including a native code
404 generator. Requires the <Literal>cygwin32</Literal> compatibility
405 library and a healthy collection of GNU tools (i.e., gcc, GNU ld, bash
409 </ListItem></VarListEntry>
411 <Term>mips-sgi-irix5:</Term>
412 <IndexTerm><Primary>mips-sgi-irix[5-6]</Primary></IndexTerm>
416 Port currently doesn't work, needs some minimal porting effort. As
417 usual, we don't have access to machines and there hasn't been an
418 overwhelming demand for this port, but feel free to get in touch.
420 </ListItem></VarListEntry>
423 <Term>powerpc-ibm-aix:</Term>
426 <IndexTerm><Primary>powerpc-ibm-aix</Primary></IndexTerm>
427 Port currently doesn't work, needs some minimal porting effort. As
428 usual, we don't have access to machines and there hasn't been an
429 overwhelming demand for this port, but feel free to get in touch.
431 </ListItem></VarListEntry>
437 Various other systems have had GHC ported to them in the distant past,
438 including various Motorola 68k boxes. The 68k support still remains,
439 but porting to one of these systems will certainly be a non-trivial
446 <Title>What machines the other tools run on</Title>
449 Unless you hear otherwise, the other tools work if GHC works.
457 <Sect1 id="sec-pre-supposed">
458 <Title>Installing pre-supposed utilities
460 <IndexTerm><Primary>pre-supposed utilities</Primary></IndexTerm>
461 <IndexTerm><Primary>utilities, pre-supposed</Primary></IndexTerm></Title>
464 Here are the gory details about some utility programs you may need;
465 <Command>perl</Command>, <Command>gcc</Command> and
466 <command>happy</command> are the only important
467 ones. (PVM<IndexTerm><Primary>PVM</Primary></IndexTerm> is important
468 if you're going for Parallel Haskell.) The
469 <Command>configure</Command><IndexTerm><Primary>configure</Primary></IndexTerm>
470 script will tell you if you are missing something.
478 <IndexTerm><Primary>pre-supposed: Perl</Primary></IndexTerm>
479 <IndexTerm><Primary>Perl, pre-supposed</Primary></IndexTerm>
482 <Emphasis>You have to have Perl to proceed!</Emphasis> Perl is a
483 language quite good for doing shell-scripty tasks that involve lots of
484 text processing. It is pretty easy to install.
488 Perl 5 is required. For Win32 platforms, we strongly suggest you
489 pick up a port of Perl 5 for <Literal>cygwin32</Literal>, as the
490 common Hip/ActiveWare port of Perl is Not Cool Enough for our
495 Perl should be put somewhere so that it can be invoked by the
496 <Literal>#!</Literal> script-invoking mechanism. (I believe
497 <Filename>/usr/bin/perl</Filename> is preferred; we use
498 <Filename>/usr/local/bin/perl</Filename> at Glasgow.) The full
499 pathname should may need to be less than 32 characters long on some
503 </ListItem></VarListEntry>
505 <Term>GNU C (<Command>gcc</Command>):</Term>
506 <IndexTerm><Primary>pre-supposed: GCC (GNU C compiler)</Primary></IndexTerm>
507 <IndexTerm><Primary>GCC (GNU C compiler), pre-supposed</Primary></IndexTerm>
511 We recommend using GCC version 2.95.2 on all platforms. Failing that,
512 version 2.7.2 is stable on most platforms. Earlier versions of GCC
513 can be assumed not to work, and versions in between 2.7.2 and 2.95.2
514 (including <command>egcs</command>) have varying degrees of stability
515 depending on the platform.
519 If your GCC dies with ``internal error'' on some GHC source file,
520 please let us know, so we can report it and get things improved.
521 (Exception: on iX86 boxes—you may need to fiddle with GHC's
522 <Option>-monly-N-regs</Option> option; see the User's Guide)
524 </ListItem></VarListEntry>
528 <indexterm><primary>Happy</primary></indexterm>
530 <para>Happy is a parser generator tool for Haskell, and is used to
531 generate GHC's parsers. Happy is written in Haskell, and is a project
532 in the CVS repository (<literal>fptools/happy</literal>). It can be
533 built from source, but bear in mind that you'll need GHC installed in
534 order to build it. To avoid the chicken/egg problem, install a binary
535 distribtion of either Happy or GHC to get started. Happy
536 distributions are available from <ulink
537 url="http://www.haskell.org/happy/">Happy's Web Page</ulink>.
543 <Term>Autoconf:</Term>
544 <IndexTerm><Primary>pre-supposed: Autoconf</Primary></IndexTerm>
545 <IndexTerm><Primary>Autoconf, pre-supposed</Primary></IndexTerm>
548 GNU Autoconf is needed if you intend to build from the CVS sources, it
549 is <Emphasis>not</Emphasis> needed if you just intend to build a
550 standard source distribution.
554 Autoconf builds the <Command>configure</Command> script from
555 <Filename>configure.in</Filename> and <Filename>aclocal.m4</Filename>.
556 If you modify either of these files, you'll need Autoconf to rebuild
557 <Filename>configure</Filename>.
560 </ListItem></VarListEntry>
562 <Term><Command>sed</Command></Term>
563 <IndexTerm><Primary>pre-supposed: sed</Primary></IndexTerm>
564 <IndexTerm><Primary>sed, pre-supposed</Primary></IndexTerm>
567 You need a working <Command>sed</Command> if you are going to build
568 from sources. The build-configuration stuff needs it. GNU sed
569 version 2.0.4 is no good! It has a bug in it that is tickled by the
570 build-configuration. 2.0.5 is OK. Others are probably OK too
571 (assuming we don't create too elaborate configure scripts.)
573 </ListItem></VarListEntry>
578 One <Literal>fptools</Literal> project is worth a quick note at this
579 point, because it is useful for all the others:
580 <Literal>glafp-utils</Literal> contains several utilities which aren't
581 particularly Glasgow-ish, but Occasionally Indispensable. Like
582 <Command>lndir</Command> for creating symbolic link trees.
585 <Sect2 id="pre-supposed-gph-tools">
586 <Title>Tools for building parallel GHC (GPH)
593 <Term>PVM version 3:</Term>
594 <IndexTerm><Primary>pre-supposed: PVM3 (Parallel Virtual Machine)</Primary></IndexTerm>
595 <IndexTerm><Primary>PVM3 (Parallel Virtual Machine), pre-supposed</Primary></IndexTerm>
599 PVM is the Parallel Virtual Machine on which Parallel Haskell programs
600 run. (You only need this if you plan to run Parallel Haskell.
601 Concurent Haskell, which runs concurrent threads on a uniprocessor
602 doesn't need it.) Underneath PVM, you can have (for example) a
603 network of workstations (slow) or a multiprocessor box (faster).
607 The current version of PVM is 3.3.11; we use 3.3.7. It is readily
608 available on the net; I think I got it from
609 <Literal>research.att.com</Literal>, in <Filename>netlib</Filename>.
613 A PVM installation is slightly quirky, but easy to do. Just follow
614 the <Filename>Readme</Filename> instructions.
616 </ListItem></VarListEntry>
618 <Term><Command>bash</Command>:</Term>
619 <IndexTerm><Primary>bash, presupposed (Parallel Haskell only)</Primary></IndexTerm>
622 Sadly, the <Command>gr2ps</Command> script, used to convert ``parallelism profiles''
623 to PostScript, is written in Bash (GNU's Bourne Again shell).
624 This bug will be fixed (someday).
626 </ListItem></VarListEntry>
632 <Sect2 id="pre-supposed-doc-tools">
633 <Title>Tools for building the Documentation
637 The following additional tools are required if you want to format the
638 documentation that comes with the <Literal>fptools</Literal> projects:
645 <Term>DocBook:</Term>
646 <IndexTerm><Primary>pre-supposed: DocBook</Primary></IndexTerm>
647 <IndexTerm><Primary>DocBook, pre-supposed</Primary></IndexTerm>
650 All our documentation is written in SGML, using the DocBook DTD and
651 processed using the <ULink
652 URL="http://sourceware.cygnus.com/docbook-tools/">Cygnus DocBook
653 tools</ULink>, which is the most shrink-wrapped SGML suite that we
654 could find. Unfortunately, it's only packaged as RPMs. You can use it
655 to generate HTML, DVI (and hence PDF and Postscript) and RTF from any
656 DocBook source file (including this manual). N.B. The <Emphasis>Cygnus</Emphasis> version of the tools is assumed. Others, such as the SuSE version, may not work.
658 </ListItem></VarListEntry>
661 <IndexTerm><Primary>pre-supposed: TeX</Primary></IndexTerm>
662 <IndexTerm><Primary>TeX, pre-supposed</Primary></IndexTerm>
665 A decent TeX distribution is required if you want to produce printable
666 documentation. We recomment teTeX, which includes just about
669 </ListItem></VarListEntry>
675 <Sect2 id="pre-supposed-other-tools">
676 <Title>Other useful tools
682 <IndexTerm><Primary>pre-supposed: flex</Primary></IndexTerm>
683 <IndexTerm><Primary>flex, pre-supposed</Primary></IndexTerm>
687 This is a quite-a-bit-better-than-Lex lexer. Used to build a couple
688 of utilities in <Literal>glafp-utils</Literal>. Depending on your
689 operating system, the supplied <Command>lex</Command> may or may not
690 work; you should get the GNU version.
692 </ListItem></VarListEntry>
699 <Sect1 id="sec-building-from-source">
700 <Title>Building from source
702 <IndexTerm><Primary>Building from source</Primary></IndexTerm>
703 <IndexTerm><Primary>Source, building from</Primary></IndexTerm></Title>
706 You've been rash enough to want to build some of
707 the Glasgow Functional Programming tools (GHC, Happy,
708 nofib, etc.) from source. You've slurped the source,
709 from the CVS repository or from a source distribution, and
710 now you're sitting looking at a huge mound of bits, wondering
715 Gingerly, you type <Command>make</Command>. Wrong already!
719 This rest of this guide is intended for duffers like me, who aren't
720 really interested in Makefiles and systems configurations, but who
721 need a mental model of the interlocking pieces so that they can make
722 them work, extend them consistently when adding new software, and lay
723 hands on them gently when they don't work.
726 <Sect2 id="sec-source-tree">
727 <Title>Your source tree
731 The source code is held in your <Emphasis>source tree</Emphasis>.
732 The root directory of your source tree <Emphasis>must</Emphasis>
733 contain the following directories and files:
742 <Filename>Makefile</Filename>: the root Makefile.
748 <Filename>mk/</Filename>: the directory that contains the
749 main Makefile code, shared by all the
750 <Literal>fptools</Literal> software.
756 <Filename>configure.in</Filename>, <Filename>config.sub</Filename>, <Filename>config.guess</Filename>:
757 these files support the configuration process.
763 <Filename>install-sh</Filename>.
772 All the other directories are individual <Emphasis>projects</Emphasis> of the
773 <Literal>fptools</Literal> system—for example, the Glasgow Haskell Compiler
774 (<Literal>ghc</Literal>), the Happy parser generator (<Literal>happy</Literal>), the <Literal>nofib</Literal> benchmark
775 suite, and so on. You can have zero or more of these. Needless to
776 say, some of them are needed to build others.
780 The important thing to remember is that even if you want only one
781 project (<Literal>happy</Literal>, say), you must have a source tree whose root
782 directory contains <Filename>Makefile</Filename>, <Filename>mk/</Filename>, <Filename>configure.in</Filename>, and the
783 project(s) you want (<Filename>happy/</Filename> in this case). You cannot get by with
784 just the <Filename>happy/</Filename> directory.
791 <IndexTerm><Primary>build trees</Primary></IndexTerm>
792 <IndexTerm><Primary>link trees, for building</Primary></IndexTerm></Title>
795 While you can build a system in the source tree, we don't recommend it.
796 We often want to build multiple versions of our software
797 for different architectures, or with different options (e.g. profiling).
798 It's very desirable to share a single copy of the source code among
803 So for every source tree we have zero or more <Emphasis>build trees</Emphasis>. Each
804 build tree is initially an exact copy of the source tree, except that
805 each file is a symbolic link to the source file, rather than being a
806 copy of the source file. There are ``standard'' Unix utilities that
807 make such copies, so standard that they go by different names:
808 <Command>lndir</Command><IndexTerm><Primary>lndir</Primary></IndexTerm>, <Command>mkshadowdir</Command><IndexTerm><Primary>mkshadowdir</Primary></IndexTerm> are two (If you
809 don't have either, the source distribution includes sources for the
810 X11 <Command>lndir</Command>—check out <Filename>fptools/glafp-utils/lndir</Filename>). See <Xref LinkEnd="sec-storysofar"> for a typical invocation.
814 The build tree does not need to be anywhere near the source tree in
815 the file system. Indeed, one advantage of separating the build tree
816 from the source is that the build tree can be placed in a
817 non-backed-up partition, saving your systems support people from
818 backing up untold megabytes of easily-regenerated, and
819 rapidly-changing, gubbins. The golden rule is that (with a single
820 exception—<XRef LinkEnd="sec-build-config">)
821 <Emphasis>absolutely everything in the build tree is either a symbolic
822 link to the source tree, or else is mechanically generated</Emphasis>.
823 It should be perfectly OK for your build tree to vanish overnight; an
824 hour or two compiling and you're on the road again.
828 You need to be a bit careful, though, that any new files you create
829 (if you do any development work) are in the source tree, not a build tree!
833 Remember, that the source files in the build tree are <Emphasis>symbolic
834 links</Emphasis> to the files in the source tree. (The build tree soon
835 accumulates lots of built files like <Filename>Foo.o</Filename>, as well.) You
836 can <Emphasis>delete</Emphasis> a source file from the build tree without affecting
837 the source tree (though it's an odd thing to do). On the other hand,
838 if you <Emphasis>edit</Emphasis> a source file from the build tree, you'll edit the
839 source-tree file directly. (You can set up Emacs so that if you edit
840 a source file from the build tree, Emacs will silently create an
841 edited copy of the source file in the build tree, leaving the source
842 file unchanged; but the danger is that you think you've edited the
843 source file whereas actually all you've done is edit the build-tree
844 copy. More commonly you do want to edit the source file.)
848 Like the source tree, the top level of your build tree must be (a
849 linked copy of) the root directory of the <Literal>fptools</Literal> suite. Inside
850 Makefiles, the root of your build tree is called
851 <Constant>$(FPTOOLS_TOP)</Constant><IndexTerm><Primary>FPTOOLS_TOP</Primary></IndexTerm>. In the rest of this document path
852 names are relative to <Constant>$(FPTOOLS_TOP)</Constant> unless otherwise stated. For
853 example, the file <Filename>ghc/mk/target.mk</Filename> is actually
854 <Filename><Constant>$(FPTOOLS_TOP)</Constant>/ghc/mk/target.mk</Filename>.
859 <Sect2 id="sec-build-config">
860 <Title>Getting the build you want
864 When you build <Literal>fptools</Literal> you will be compiling code on a particular
865 <Emphasis>host platform</Emphasis>, to run on a particular <Emphasis>target platform</Emphasis>
866 (usually the same as the host platform)<IndexTerm><Primary>platform</Primary></IndexTerm>. The
867 difficulty is that there are minor differences between different
868 platforms; minor, but enough that the code needs to be a bit different
869 for each. There are some big differences too: for a different
870 architecture we need to build GHC with a different native-code
875 There are also knobs you can turn to control how the <Literal>fptools</Literal>
876 software is built. For example, you might want to build GHC optimised
877 (so that it runs fast) or unoptimised (so that you can compile it fast
878 after you've modified it. Or, you might want to compile it with
879 debugging on (so that extra consistency-checking code gets included)
884 All of this stuff is called the <Emphasis>configuration</Emphasis> of your build.
885 You set the configuration using a three-step process.
889 <Term>Step 1: get ready for configuration.</Term>
893 <Constant>$(FPTOOLS_TOP)</Constant> and issue the command <Command>autoconf</Command><IndexTerm><Primary>autoconf</Primary></IndexTerm> (with
894 no arguments). This GNU program converts <Filename><Constant>$(FPTOOLS_TOP)</Constant>/configure.in</Filename>
895 to a shell script called <Filename><Constant>$(FPTOOLS_TOP)</Constant>/configure</Filename>.
899 Some projects, including GHC, have their own configure script. If
901 <Constant>$(FPTOOLS_TOP)/<project>/configure.in</Constant>,
902 then you need to run <command>autoconf</command> in that directory too.
906 Both these steps are completely platform-independent; they just mean
907 that the human-written file (<Filename>configure.in</Filename>) can be short, although
908 the resulting shell script, <Command>configure</Command>, and <Filename>mk/config.h.in</Filename>, are
913 In case you don't have <Command>autoconf</Command> we distribute the results,
914 <Command>configure</Command>, and <Filename>mk/config.h.in</Filename>, with the source distribution. They
915 aren't kept in the repository, though.
917 </ListItem></VarListEntry>
919 <Term>Step 2: system configuration.</Term>
922 Runs the newly-created <Command>configure</Command> script, thus:
928 <Command>configure</Command>'s mission is to scurry round your
929 computer working out what architecture it has, what operating system,
930 whether it has the <Function>vfork</Function> system call, where
931 <Command>yacc</Command> is kept, whether <Command>gcc</Command> is
932 available, where various obscure <Literal>#include</Literal> files
933 are, whether it's a leap year, and what the systems manager had for
934 lunch. It communicates these snippets of information in two ways:
943 It translates <Filename>mk/config.mk.in</Filename><IndexTerm><Primary>config.mk.in</Primary></IndexTerm> to
944 <Filename>mk/config.mk</Filename><IndexTerm><Primary>config.mk</Primary></IndexTerm>, substituting for things between
945 ``<Literal>@</Literal>'' brackets. So, ``<Literal>@HaveGcc@</Literal>'' will be replaced by
946 ``<Literal>YES</Literal>'' or ``<Literal>NO</Literal>'' depending on what <Command>configure</Command> finds.
947 <Filename>mk/config.mk</Filename> is included by every Makefile (directly or indirectly),
948 so the configuration information is thereby communicated to all
956 It translates <Filename>mk/config.h.in</Filename><IndexTerm><Primary>config.h.in</Primary></IndexTerm> to
957 <Filename>mk/config.h</Filename><IndexTerm><Primary>config.h</Primary></IndexTerm>. The latter is <Literal>#include</Literal>d by various C
958 programs, which can thereby make use of configuration information.
968 <Command>configure</Command> caches the results of its run in <Filename>config.cache</Filename>. Quite
969 often you don't want that; you're running <Command>configure</Command> a second time
970 because something has changed. In that case, simply delete
971 <Filename>config.cache</Filename>.
973 </ListItem></VarListEntry>
975 <Term>Step 3: build configuration.</Term>
978 Next, you say how this build of <Literal>fptools</Literal> is to differ from the
979 standard defaults by creating a new file <Filename>mk/build.mk</Filename><IndexTerm><Primary>build.mk</Primary></IndexTerm>
980 <Emphasis>in the build tree</Emphasis>. This file is the one and only file you edit
981 in the build tree, precisely because it says how this build differs
982 from the source. (Just in case your build tree does die, you might
983 want to keep a private directory of <Filename>build.mk</Filename> files, and use a
984 symbolic link in each build tree to point to the appropriate one.) So
985 <Filename>mk/build.mk</Filename> never exists in the source tree—you create one in
986 each build tree from the template. We'll discuss what to put in it
989 </ListItem></VarListEntry>
994 And that's it for configuration. Simple, eh?
998 What do you put in your build-specific configuration file
999 <Filename>mk/build.mk</Filename>? <Emphasis>For almost all purposes all you will do is put
1000 make variable definitions that override those in</Emphasis> <Filename>mk/config.mk.in</Filename>.
1001 The whole point of <Filename>mk/config.mk.in</Filename>—and its derived counterpart
1002 <Filename>mk/config.mk</Filename>—is to define the build configuration. It is heavily
1003 commented, as you will see if you look at it. So generally, what you
1004 do is look at <Filename>mk/config.mk.in</Filename>, and add definitions in <Filename>mk/build.mk</Filename>
1005 that override any of the <Filename>config.mk</Filename> definitions that you want to
1006 change. (The override occurs because the main boilerplate file,
1007 <Filename>mk/boilerplate.mk</Filename><IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm>, includes <Filename>build.mk</Filename> after
1008 <Filename>config.mk</Filename>.)
1012 For example, <Filename>config.mk.in</Filename> contains the definition:
1018 ProjectsToBuild = glafp-utils ghc hslibs
1024 The accompanying comment explains that this is the list of enabled
1025 projects; that is, if (after configuring) you type <Command>gmake all</Command> in
1026 <Constant>FPTOOLS_TOP</Constant> three specified projects will be made. If you want to
1027 add <Command>green-card</Command>, you can add this line to <Filename>build.mk</Filename>:
1033 ProjectsToBuild += green-card
1045 ProjectsToBuild = glafp-utils ghc green-card
1051 (GNU <Command>make</Command> allows existing definitions to have new text appended
1052 using the ``<Literal>+=</Literal>'' operator, which is quite a convenient feature.)
1056 When reading <Filename>config.mk.in</Filename>, remember that anything between
1057 ``@...@'' signs is going to be substituted by <Command>configure</Command>
1058 later. You <Emphasis>can</Emphasis> override the resulting definition if you want,
1059 but you need to be a bit surer what you are doing. For example,
1060 there's a line that says:
1072 This defines the Make variables <Constant>YACC</Constant> to the pathname for a <Command>yacc</Command> that
1073 <Command>configure</Command> finds somewhere. If you have your own pet <Command>yacc</Command> you want
1074 to use instead, that's fine. Just add this line to <Filename>mk/build.mk</Filename>:
1086 You do not <Emphasis>have</Emphasis> to have a <Filename>mk/build.mk</Filename> file at all; if you
1087 don't, you'll get all the default settings from <Filename>mk/config.mk.in</Filename>.
1091 You can also use <Filename>build.mk</Filename> to override anything that <Command>configure</Command> got
1092 wrong. One place where this happens often is with the definition of
1093 <Constant>FPTOOLS_TOP_ABS</Constant>: this variable is supposed to be the canonical path
1094 to the top of your source tree, but if your system uses an automounter
1095 then the correct directory is hard to find automatically. If you find
1096 that <Command>configure</Command> has got it wrong, just put the correct definition in
1097 <Filename>build.mk</Filename>.
1102 <Sect2 id="sec-storysofar">
1103 <Title>The story so far</Title>
1106 Let's summarise the steps you need to carry to get yourself
1107 a fully-configured build tree from scratch.
1116 Get your source tree from somewhere (CVS repository or source
1117 distribution). Say you call the root directory <Filename>myfptools</Filename> (it
1118 does not have to be called <Filename>fptools</Filename>). Make sure that you have
1119 the essential files (see <XRef LinkEnd="sec-source-tree">).
1126 Use <Command>lndir</Command> or <Command>mkshadowdir</Command> to create a build tree.
1130 mkshadowdir . /scratch/joe-bloggs/myfptools-sun4
1133 (N.B. <Command>mkshadowdir</Command>'s first argument is taken relative to its second.) You probably want to give the build tree a name that
1134 suggests its main defining characteristic (in your mind at least),
1135 in case you later add others.
1142 Change directory to the build tree. Everything is going
1143 to happen there now.
1146 cd /scratch/joe-bloggs/myfptools-sun4
1154 Prepare for system configuration:
1160 (You can skip this step if you are starting from a source distribution,
1161 and you already have <Filename>configure</Filename> and <Filename>mk/config.h.in</Filename>.)
1168 Do system configuration:
1180 Create the file <Filename>mk/build.mk</Filename>,
1181 adding definitions for your desired configuration options.
1192 You can make subsequent changes to <Filename>mk/build.mk</Filename> as often
1193 as you like. You do not have to run any further configuration
1194 programs to make these changes take effect.
1195 In theory you should, however, say <Command>gmake clean</Command>, <Command>gmake all</Command>,
1196 because configuration option changes could affect anything—but in practice you are likely to know what's affected.
1202 <Title>Making things</Title>
1205 At this point you have made yourself a fully-configured build tree,
1206 so you are ready to start building real things.
1210 The first thing you need to know is that
1211 <Emphasis>you must use GNU <Command>make</Command>, usually called <Command>gmake</Command>, not standard Unix <Command>make</Command></Emphasis>.
1212 If you use standard Unix <Command>make</Command> you will get all sorts of error messages
1213 (but no damage) because the <Literal>fptools</Literal> <Command>Makefiles</Command> use GNU <Command>make</Command>'s facilities
1219 <Sect2 id="sec-standard-targets">
1220 <Title>Standard Targets
1222 <IndexTerm><Primary>targets, standard makefile</Primary></IndexTerm>
1223 <IndexTerm><Primary>makefile targets</Primary></IndexTerm></Title>
1226 In any directory you should be able to make the following:
1230 <Term><Literal>boot</Literal>:</Term>
1233 does the one-off preparation required to get ready for the real work.
1234 Notably, it does <Command>gmake depend</Command> in all directories that contain
1235 programs. It also builds the necessary tools for compilation to proceed.
1239 You should say <Command>gmake boot</Command> right after configuring your build tree,
1240 but note that this is a one-off, i.e., there's no need to re-do
1241 <Command>gmake boot</Command> if you should re-configure your build tree at a later
1242 stage (no harm caused if you do though).
1244 </ListItem></VarListEntry>
1246 <Term><Literal>all</Literal>:</Term>
1249 makes all the final target(s) for this Makefile.
1250 Depending on which directory you are in a ``final target'' may be an
1251 executable program, a library archive, a shell script, or a Postscript
1252 file. Typing <Command>gmake</Command> alone is generally the same as typing <Command>gmake all</Command>.
1254 </ListItem></VarListEntry>
1256 <Term><Literal>install</Literal>:</Term>
1259 installs the things built by <Literal>all</Literal>. Where does it
1260 install them? That is specified by
1261 <Filename>mk/config.mk.in</Filename>; you can override it in
1262 <Filename>mk/build.mk</Filename>, or by running
1263 <command>configure</command> with command-line arguments like
1264 <literal>--bindir=/home/simonpj/bin</literal>; see <literal>./configure
1265 --help</literal> for the full details.
1267 </ListItem></VarListEntry>
1269 <Term><Literal>uninstall</Literal>:</Term>
1272 reverses the effect of <Literal>install</Literal>.
1274 </ListItem></VarListEntry>
1276 <Term><Literal>clean</Literal>:</Term>
1279 remove all easily-rebuilt files.
1281 </ListItem></VarListEntry>
1283 <Term><Literal>veryclean</Literal>:</Term>
1286 remove all files that can be rebuilt at all.
1287 There's a danger here that you may remove a file that needs a more
1288 obscure utility to rebuild it (especially if you started from a source
1291 </ListItem></VarListEntry>
1293 <Term><Literal>check</Literal>:</Term>
1298 </ListItem></VarListEntry>
1303 All of these standard targets automatically recurse into
1304 sub-directories. Certain other standard targets do not:
1311 <Term><Literal>configure</Literal>:</Term>
1314 is only available in the root directory
1315 <Constant>$(FPTOOLS_TOP)</Constant>; it has been discussed in <XRef LinkEnd="sec-build-config">.
1317 </ListItem></VarListEntry>
1319 <Term><Literal>depend</Literal>:</Term>
1322 make a <Filename>.depend</Filename> file in each directory that needs
1323 it. This <Filename>.depend</Filename> file contains mechanically-generated dependency
1324 information; for example, suppose a directory contains a Haskell
1325 source module <Filename>Foo.lhs</Filename> which imports another module <Literal>Baz</Literal>.
1326 Then the generated <Filename>.depend</Filename> file will contain the dependency:
1338 which says that the object file <Filename>Foo.o</Filename> depends on the interface file
1339 <Filename>Baz.hi</Filename> generated by compiling module <Literal>Baz</Literal>. The <Filename>.depend</Filename> file is
1340 automatically included by every Makefile.
1342 </ListItem></VarListEntry>
1344 <Term><Literal>binary-dist</Literal>:</Term>
1347 make a binary distribution. This is the
1348 target we use to build the binary distributions of GHC and Happy.
1350 </ListItem></VarListEntry>
1352 <Term><Literal>dist</Literal>:</Term>
1355 make a source distribution. You must be in a
1356 linked build tree to make this target.
1358 </ListItem></VarListEntry>
1363 Most <Filename>Makefile</Filename>s have targets other than these. You can discover them by looking in the <Filename>Makefile</Filename> itself.
1369 <title>Using a project from the build tree</title>
1371 If you want to build GHC (say) and just use it direct from the build
1372 tree without doing <literal>make install</literal> first, you can run
1373 the in-place driver script:
1374 <filename>ghc/driver/ghc-inplace</filename>.
1377 <para> Do <emphasis>NOT</emphasis> use
1378 <filename>ghc/driver/ghc</filename>, or
1379 <filename>ghc/driver/ghc-4.xx</filename>, as these are the scripts
1380 intended for installation, and contain hard-wired paths to the
1381 installed libraries, rather than the libraries in the build tree.
1385 Happy can similarly be run from the build tree, using
1386 <filename>happy/src/happy-inplace</filename>.
1391 <Title>Fast Making <IndexTerm><Primary>fastmake</Primary></IndexTerm>
1392 <IndexTerm><Primary>dependencies, omitting</Primary></IndexTerm>
1393 <IndexTerm><Primary>FAST, makefile
1394 variable</Primary></IndexTerm></Title>
1397 Sometimes the dependencies get in the way: if you've made a small
1398 change to one file, and you're absolutely sure that it won't affect
1399 anything else, but you know that <Command>make</Command> is going to rebuild everything
1400 anyway, the following hack may be useful:
1412 This tells the make system to ignore dependencies and just build what
1413 you tell it to. In other words, it's equivalent to temporarily
1414 removing the <Filename>.depend</Filename> file in the current directory (where
1415 <Command>mkdependHS</Command> and friends store their dependency information).
1419 A bit of history: GHC used to come with a <Command>fastmake</Command> script that did
1420 the above job, but GNU make provides the features we need to do it
1421 without resorting to a script. Also, we've found that fastmaking is
1422 less useful since the advent of GHC's recompilation checker (see the
1423 User's Guide section on "Separate Compilation").
1431 <Title>The <Filename>Makefile</Filename> architecture
1432 <IndexTerm><Primary>makefile architecture</Primary></IndexTerm></Title>
1435 <Command>make</Command> is great if everything works—you type <Command>gmake install</Command> and
1436 lo! the right things get compiled and installed in the right places.
1437 Our goal is to make this happen often, but somehow it often doesn't;
1438 instead some weird error message eventually emerges from the bowels of
1439 a directory you didn't know existed.
1443 The purpose of this section is to give you a road-map to help you figure
1444 out what is going right and what is going wrong.
1448 <Title>A small project</Title>
1451 To get started, let us look at the <Filename>Makefile</Filename> for an imaginary small
1452 <Literal>fptools</Literal> project, <Literal>small</Literal>. Each project in <Literal>fptools</Literal> has its own
1453 directory in <Constant>FPTOOLS_TOP</Constant>, so the <Literal>small</Literal> project will have its own
1454 directory <Constant>FPOOLS_TOP/small/</Constant>. Inside the <Filename>small/</Filename> directory there
1455 will be a <Filename>Makefile</Filename>, looking something like this:
1459 <IndexTerm><Primary>Makefile, minimal</Primary></IndexTerm>
1462 # Makefile for fptools project "small"
1465 include $(TOP)/mk/boilerplate.mk
1467 SRCS = $(wildcard *.lhs) $(wildcard *.c)
1470 include $(TOP)/target.mk
1476 This <Filename>Makefile</Filename> has three sections:
1485 The first section includes
1489 One of the most important
1490 features of GNU <Command>make</Command> that we use is the ability for a <Filename>Makefile</Filename> to
1491 include another named file, very like <Command>cpp</Command>'s <Literal>#include</Literal>
1496 a file of ``boilerplate'' code from the level
1497 above (which in this case will be
1498 <Filename><Constant>FPTOOLS_TOP</Constant>/mk/boilerplate.mk</Filename><IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm>). As its name
1499 suggests, <Filename>boilerplate.mk</Filename> consists of a large quantity of standard
1500 <Filename>Makefile</Filename> code. We discuss this boilerplate in more detail in
1501 <XRef LinkEnd="sec-boiler">.
1502 <IndexTerm><Primary>include, directive in Makefiles</Primary></IndexTerm>
1503 <IndexTerm><Primary>Makefile inclusion</Primary></IndexTerm>
1505 Before the <Literal>include</Literal> statement, you must define the <Command>make</Command> variable
1506 <Constant>TOP</Constant><IndexTerm><Primary>TOP</Primary></IndexTerm> to be the directory containing the <Filename>mk</Filename> directory in
1507 which the <Filename>boilerplate.mk</Filename> file is. It is <Emphasis>not</Emphasis> OK to simply say
1511 include ../mk/boilerplate.mk # NO NO NO
1515 Why? Because the <Filename>boilerplate.mk</Filename> file needs to know where it is, so
1516 that it can, in turn, <Literal>include</Literal> other files. (Unfortunately, when an
1517 <Literal>include</Literal>d file does an <Literal>include</Literal>, the filename is treated relative to
1518 the directory in which <Command>gmake</Command> is being run, not the directory in
1519 which the <Literal>include</Literal>d sits.) In general, <Emphasis>every file <Filename>foo.mk</Filename>
1520 assumes that <Filename><Constant>$(TOP)</Constant>/mk/foo.mk</Filename> refers to itself.</Emphasis> It is up to the
1521 <Filename>Makefile</Filename> doing the <Literal>include</Literal> to ensure this is the case.
1523 Files intended for inclusion in other <Filename>Makefile</Filename>s are written to have
1524 the following property: <Emphasis>after <Filename>foo.mk</Filename> is <Literal>include</Literal>d, it leaves
1525 <Constant>TOP</Constant> containing the same value as it had just before the <Literal>include</Literal>
1526 statement</Emphasis>. In our example, this invariant guarantees that the
1527 <Literal>include</Literal> for <Filename>target.mk</Filename> will look in the same directory as that for
1528 <Filename>boilerplate.mk</Filename>.
1535 The second section defines the following standard <Command>make</Command>
1536 variables: <Constant>SRCS</Constant><IndexTerm><Primary>SRCS</Primary></IndexTerm> (the source files from which is to be
1537 built), and <Constant>HS_PROG</Constant><IndexTerm><Primary>HS_PROG</Primary></IndexTerm> (the executable binary to be
1538 built). We will discuss in more detail what the ``standard
1539 variables'' are, and how they affect what happens, in <XRef LinkEnd="sec-targets">.
1541 The definition for <Constant>SRCS</Constant> uses the useful GNU <Command>make</Command> construct
1542 <Literal>$(wildcard $pat$)</Literal><IndexTerm><Primary>wildcard</Primary></IndexTerm>, which expands to a list of all
1543 the files matching the pattern <Literal>pat</Literal> in the current directory. In
1544 this example, <Constant>SRCS</Constant> is set to the list of all the <Filename>.lhs</Filename> and <Filename>.c</Filename>
1545 files in the directory. (Let's suppose there is one of each,
1546 <Filename>Foo.lhs</Filename> and <Filename>Baz.c</Filename>.)
1553 The last section includes a second file of standard code,
1554 called <Filename>target.mk</Filename><IndexTerm><Primary>target.mk</Primary></IndexTerm>. It contains the rules that tell
1555 <Command>gmake</Command> how to make the standard targets (<Xref LinkEnd="sec-standard-targets">). Why, you ask,
1556 can't this standard code be part of <Filename>boilerplate.mk</Filename>? Good question.
1557 We discuss the reason later, in <Xref LinkEnd="sec-boiler-arch">.
1559 You do not <Emphasis>have</Emphasis> to <Literal>include</Literal> the <Filename>target.mk</Filename> file. Instead, you
1560 can write rules of your own for all the standard targets. Usually,
1561 though, you will find quite a big payoff from using the canned rules
1562 in <Filename>target.mk</Filename>; the price tag is that you have to understand what
1563 canned rules get enabled, and what they do (<Xref LinkEnd="sec-targets">).
1573 In our example <Filename>Makefile</Filename>, most of the work is done by the two
1574 <Literal>include</Literal>d files. When you say <Command>gmake all</Command>, the following things
1584 <Command>gmake</Command> figures out that the object files are <Filename>Foo.o</Filename> and
1585 <Filename>Baz.o</Filename>.
1592 It uses a boilerplate pattern rule to compile <Filename>Foo.lhs</Filename> to
1593 <Filename>Foo.o</Filename> using a Haskell compiler. (Which one? That is set in the
1594 build configuration.)
1601 It uses another standard pattern rule to compile <Filename>Baz.c</Filename> to
1602 <Filename>Baz.o</Filename>, using a C compiler. (Ditto.)
1609 It links the resulting <Filename>.o</Filename> files together to make <Literal>small</Literal>,
1610 using the Haskell compiler to do the link step. (Why not use <Command>ld</Command>?
1611 Because the Haskell compiler knows what standard libraries to link in.
1612 How did <Command>gmake</Command> know to use the Haskell compiler to do the link,
1613 rather than the C compiler? Because we set the variable <Constant>HS_PROG</Constant>
1614 rather than <Constant>C_PROG</Constant>.)
1624 All <Filename>Makefile</Filename>s should follow the above three-section format.
1630 <Title>A larger project</Title>
1633 Larger projects are usually structured into a number of sub-directories,
1634 each of which has its own <Filename>Makefile</Filename>. (In very large projects, this
1635 sub-structure might be iterated recursively, though that is rare.)
1636 To give you the idea, here's part of the directory structure for
1637 the (rather large) GHC project:
1650 ...source files for documentation...
1653 ...source files for driver...
1656 parser/...source files for parser...
1657 renamer/...source files for renamer...
1664 The sub-directories <Filename>docs</Filename>, <Filename>driver</Filename>, <Filename>compiler</Filename>, and so on, each
1665 contains a sub-component of GHC, and each has its own <Filename>Makefile</Filename>.
1666 There must also be a <Filename>Makefile</Filename> in <Filename><Constant>$(FPTOOLS_TOP)</Constant>/ghc</Filename>. It does most
1667 of its work by recursively invoking <Command>gmake</Command> on the <Filename>Makefile</Filename>s in the
1668 sub-directories. We say that <Filename>ghc/Makefile</Filename> is a <Emphasis>non-leaf
1669 <Filename>Makefile</Filename></Emphasis>, because it does little except organise its children,
1670 while the <Filename>Makefile</Filename>s in the sub-directories are all <Emphasis>leaf
1671 <Filename>Makefile</Filename>s</Emphasis>. (In principle the sub-directories might themselves
1672 contain a non-leaf <Filename>Makefile</Filename> and several sub-sub-directories, but
1673 that does not happen in GHC.)
1677 The <Filename>Makefile</Filename> in <Filename>ghc/compiler</Filename> is considered a leaf <Filename>Makefile</Filename> even
1678 though the <Filename>ghc/compiler</Filename> has sub-directories, because these sub-directories
1679 do not themselves have <Filename>Makefile</Filename>s in them. They are just used to structure
1680 the collection of modules that make up GHC, but all are managed by the
1681 single <Filename>Makefile</Filename> in <Filename>ghc/compiler</Filename>.
1685 You will notice that <Filename>ghc/</Filename> also contains a directory <Filename>ghc/mk/</Filename>. It
1686 contains GHC-specific <Filename>Makefile</Filename> boilerplate code. More precisely:
1695 <Filename>ghc/mk/boilerplate.mk</Filename> is included at the top of
1696 <Filename>ghc/Makefile</Filename>, and of all the leaf <Filename>Makefile</Filename>s in the
1697 sub-directories. It in turn <Literal>include</Literal>s the main boilerplate file
1698 <Filename>mk/boilerplate.mk</Filename>.
1706 <Filename>ghc/mk/target.mk</Filename> is <Literal>include</Literal>d at the bottom of
1707 <Filename>ghc/Makefile</Filename>, and of all the leaf <Filename>Makefile</Filename>s in the
1708 sub-directories. It in turn <Literal>include</Literal>s the file <Filename>mk/target.mk</Filename>.
1718 So these two files are the place to look for GHC-wide customisation
1719 of the standard boilerplate.
1724 <Sect2 id="sec-boiler-arch">
1725 <Title>Boilerplate architecture
1726 <IndexTerm><Primary>boilerplate architecture</Primary></IndexTerm>
1730 Every <Filename>Makefile</Filename> includes a <Filename>boilerplate.mk</Filename><IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm> file
1731 at the top, and <Filename>target.mk</Filename><IndexTerm><Primary>target.mk</Primary></IndexTerm> file at the bottom. In
1732 this section we discuss what is in these files, and why there have to
1733 be two of them. In general:
1742 <Filename>boilerplate.mk</Filename> consists of:
1748 <Emphasis>Definitions of millions of <Command>make</Command> variables</Emphasis> that
1749 collectively specify the build configuration. Examples:
1750 <Constant>HC_OPTS</Constant><IndexTerm><Primary>HC_OPTS</Primary></IndexTerm>, the options to feed to the Haskell compiler;
1751 <Constant>NoFibSubDirs</Constant><IndexTerm><Primary>NoFibSubDirs</Primary></IndexTerm>, the sub-directories to enable within the
1752 <Literal>nofib</Literal> project; <Constant>GhcWithHc</Constant><IndexTerm><Primary>GhcWithHc</Primary></IndexTerm>, the name of the Haskell
1753 compiler to use when compiling GHC in the <Literal>ghc</Literal> project.
1759 <Emphasis>Standard pattern rules</Emphasis> that tell <Command>gmake</Command> how to construct one
1767 <Filename>boilerplate.mk</Filename> needs to be <Literal>include</Literal>d at the <Emphasis>top</Emphasis>
1768 of each <Filename>Makefile</Filename>, so that the user can replace the
1769 boilerplate definitions or pattern rules by simply giving a new
1770 definition or pattern rule in the <Filename>Makefile</Filename>. <Command>gmake</Command>
1771 simply takes the last definition as the definitive one.
1773 Instead of <Emphasis>replacing</Emphasis> boilerplate definitions, it is also quite
1774 common to <Emphasis>augment</Emphasis> them. For example, a <Filename>Makefile</Filename> might say:
1782 thereby adding ``<Option>-O</Option>'' to the end of <Constant>SRC_HC_OPTS</Constant><IndexTerm><Primary>SRC_HC_OPTS</Primary></IndexTerm>.
1789 <Filename>target.mk</Filename> contains <Command>make</Command> rules for the standard
1790 targets described in <Xref LinkEnd="sec-standard-targets">. These rules are selectively included,
1791 depending on the setting of certain <Command>make</Command> variables. These
1792 variables are usually set in the middle section of the
1793 <Filename>Makefile</Filename> between the two <Literal>include</Literal>s.
1795 <Filename>target.mk</Filename> must be included at the end (rather than being part of
1796 <Filename>boilerplate.mk</Filename>) for several tiresome reasons:
1803 <Command>gmake</Command> commits target and dependency lists earlier than
1804 it should. For example, <FIlename>target.mk</FIlename> has a rule that looks like
1809 $(HS_PROG) : $(OBJS)
1810 $(HC) $(LD_OPTS) $< -o $@
1814 If this rule was in <Filename>boilerplate.mk</Filename> then <Constant>$(HS_PROG)</Constant><IndexTerm><Primary>HS_PROG</Primary></IndexTerm>
1815 and <Constant>$(OBJS)</Constant><IndexTerm><Primary>OBJS</Primary></IndexTerm> would not have their final values at the
1816 moment <Command>gmake</Command> encountered the rule. Alas, <Command>gmake</Command> takes a snapshot
1817 of their current values, and wires that snapshot into the rule. (In
1818 contrast, the commands executed when the rule ``fires'' are only
1819 substituted at the moment of firing.) So, the rule must follow the
1820 definitions given in the <Filename>Makefile</Filename> itself.
1827 Unlike pattern rules, ordinary rules cannot be overriden or
1828 replaced by subsequent rules for the same target (at least, not without an
1829 error message). Including ordinary rules in <Filename>boilerplate.mk</Filename> would
1830 prevent the user from writing rules for specific targets in specific cases.
1837 There are a couple of other reasons I've forgotten, but it doesn't
1853 <Sect2 id="sec-boiler">
1854 <Title>The main <Filename>mk/boilerplate.mk</Filename> file
1856 <IndexTerm><Primary>boilerplate.mk</Primary></IndexTerm></Title>
1859 If you look at <Filename><Constant>$(FPTOOLS_TOP)</Constant>/mk/boilerplate.mk</Filename> you will find
1860 that it consists of the following sections, each held in a separate
1868 <Term><Filename>config.mk</Filename><IndexTerm><Primary>config.mk</Primary></IndexTerm></Term>
1871 is the build configuration file we
1872 discussed at length in <Xref LinkEnd="sec-build-config">.
1874 </ListItem></VarListEntry>
1876 <Term><Filename>paths.mk</Filename><IndexTerm><Primary>paths.mk</Primary></IndexTerm></Term>
1879 defines <Command>make</Command> variables for
1880 pathnames and file lists. In particular, it gives definitions for:
1887 <Term><Constant>SRCS</Constant><IndexTerm><Primary>SRCS</Primary></IndexTerm>:</Term>
1890 all source files in the current directory.
1892 </ListItem></VarListEntry>
1894 <Term><Constant>HS_SRCS</Constant><IndexTerm><Primary>HS_SRCS</Primary></IndexTerm>:</Term>
1897 all Haskell source files in the current directory.
1898 It is derived from <Constant>$(SRCS)</Constant>, so if you override <Constant>SRCS</Constant> with a new value
1899 <Constant>HS_SRCS</Constant> will follow suit.
1901 </ListItem></VarListEntry>
1903 <Term><Constant>C_SRCS</Constant><IndexTerm><Primary>C_SRCS</Primary></IndexTerm>:</Term>
1906 similarly for C source files.
1908 </ListItem></VarListEntry>
1910 <Term><Constant>HS_OBJS</Constant><IndexTerm><Primary>HS_OBJS</Primary></IndexTerm>:</Term>
1913 the <Filename>.o</Filename> files derived from <Constant>$(HS_SRCS)</Constant>.
1915 </ListItem></VarListEntry>
1917 <Term><Constant>C_OBJS</Constant><IndexTerm><Primary>C_OBJS</Primary></IndexTerm>:</Term>
1920 similarly for <Constant>$(C_SRCS)</Constant>.
1922 </ListItem></VarListEntry>
1924 <Term><Constant>OBJS</Constant><IndexTerm><Primary>OBJS</Primary></IndexTerm>:</Term>
1927 the concatenation of <Constant>$(HS_OBJS)</Constant> and <Constant>$(C_OBJS)</Constant>.
1929 </ListItem></VarListEntry>
1934 Any or all of these definitions can easily be overriden by giving new
1935 definitions in your <Filename>Makefile</Filename>. For example, if there are things in
1936 the current directory that look like source files but aren't, then
1937 you'll need to set <Constant>SRCS</Constant> manually in your <Filename>Makefile</Filename>. The other
1938 definitions will then work from this new definition.
1942 What, exactly, does <Filename>paths.mk</Filename> consider a ``source file'' to be? It's
1943 based on the file's suffix (e.g. <Filename>.hs</Filename>, <Filename>.lhs</Filename>, <Filename>.c</Filename>, <Filename>.lc</Filename>, etc), but
1944 this is the kind of detail that changes, so rather than
1945 enumerate the source suffices here the best thing to do is to look in
1946 <Filename>paths.mk</Filename>.
1948 </ListItem></VarListEntry>
1950 <Term><Filename>opts.mk</Filename><IndexTerm><Primary>opts.mk</Primary></IndexTerm></Term>
1953 defines <Command>make</Command> variables for option
1954 strings to pass to each program. For example, it defines
1955 <Constant>HC_OPTS</Constant><IndexTerm><Primary>HC_OPTS</Primary></IndexTerm>, the option strings to pass to the Haskell
1956 compiler. See <Xref LinkEnd="sec-suffix">.
1958 </ListItem></VarListEntry>
1960 <Term><Filename>suffix.mk</Filename><IndexTerm><Primary>suffix.mk</Primary></IndexTerm></Term>
1963 defines standard pattern rules—see <Xref LinkEnd="sec-suffix">.
1965 </ListItem></VarListEntry>
1970 Any of the variables and pattern rules defined by the boilerplate file
1971 can easily be overridden in any particular <Filename>Makefile</Filename>, because the
1972 boilerplate <Literal>include</Literal> comes first. Definitions after this <Literal>include</Literal>
1973 directive simply override the default ones in <Filename>boilerplate.mk</Filename>.
1978 <Sect2 id="sec-suffix">
1979 <Title>Pattern rules and options
1981 <IndexTerm><Primary>Pattern rules</Primary></IndexTerm></Title>
1984 The file <Filename>suffix.mk</Filename><IndexTerm><Primary>suffix.mk</Primary></IndexTerm> defines standard <Emphasis>pattern
1985 rules</Emphasis> that say how to build one kind of file from another, for
1986 example, how to build a <Filename>.o</Filename> file from a <Filename>.c</Filename> file. (GNU <Command>make</Command>'s
1987 <Emphasis>pattern rules</Emphasis> are more powerful and easier to use than Unix
1988 <Command>make</Command>'s <Emphasis>suffix rules</Emphasis>.)
1992 Almost all the rules look something like this:
2000 $(CC) $(CC_OPTS) -c $< -o $@
2006 Here's how to understand the rule. It says that
2007 <Emphasis>something</Emphasis><Filename>.o</Filename> (say <Filename>Foo.o</Filename>) can be built from
2008 <Emphasis>something</Emphasis><Filename>.c</Filename> (<Filename>Foo.c</Filename>), by invoking the C compiler
2009 (path name held in <Constant>$(CC)</Constant>), passing to it the options
2010 <Constant>$(CC_OPTS)</Constant> and the rule's dependent file of the rule
2011 <Literal>$<</Literal> (<Filename>Foo.c</Filename> in this case), and putting the result in
2012 the rule's target <Literal>$@</Literal> (<Filename>Foo.o</Filename> in this case).
2016 Every program is held in a <Command>make</Command> variable defined in
2017 <Filename>mk/config.mk</Filename>—look in <Filename>mk/config.mk</Filename> for the
2018 complete list. One important one is the Haskell compiler, which is
2019 called <Constant>$(HC)</Constant>.
2023 Every program's options are are held in a <Command>make</Command> variables called
2024 <Constant><prog>_OPTS</Constant>. the <Constant><prog>_OPTS</Constant> variables are defined in
2025 <Filename>mk/opts.mk</Filename>. Almost all of them are defined like this:
2031 CC_OPTS = $(SRC_CC_OPTS) $(WAY$(_way)_CC_OPTS) $($*_CC_OPTS) $(EXTRA_CC_OPTS)
2037 The four variables from which <Constant>CC_OPTS</Constant> is built have the following meaning:
2044 <Term><Constant>SRC_CC_OPTS</Constant><IndexTerm><Primary>SRC_CC_OPTS</Primary></IndexTerm>:</Term>
2047 options passed to all C
2050 </ListItem></VarListEntry>
2052 <Term><Constant>WAY_<way>_CC_OPTS</Constant>:</Term>
2056 compilations for way <Literal><way></Literal>. For example,
2057 <Constant>WAY_mp_CC_OPTS</Constant> gives options to pass to the C compiler when
2058 compiling way <Literal>mp</Literal>. The variable <Constant>WAY_CC_OPTS</Constant> holds
2059 options to pass to the C compiler when compiling the standard way.
2060 (<Xref LinkEnd="sec-ways"> dicusses multi-way
2063 </ListItem></VarListEntry>
2065 <Term><Constant><module>_CC_OPTS</Constant>:</Term>
2069 pass to the C compiler that are specific to module <Literal><module></Literal>. For example, <Constant>SMap_CC_OPTS</Constant> gives the specific options
2070 to pass to the C compiler when compiling <Filename>SMap.c</Filename>.
2072 </ListItem></VarListEntry>
2074 <Term><Constant>EXTRA_CC_OPTS</Constant><IndexTerm><Primary>EXTRA_CC_OPTS</Primary></IndexTerm>:</Term>
2077 extra options to pass to all
2078 C compilations. This is intended for command line use, thus:
2084 gmake libHS.a EXTRA_CC_OPTS="-v"
2088 </ListItem></VarListEntry>
2094 <Sect2 id="sec-targets">
2095 <Title>The main <Filename>mk/target.mk</Filename> file
2097 <IndexTerm><Primary>target.mk</Primary></IndexTerm></Title>
2100 <Filename>target.mk</Filename> contains canned rules for all the standard targets
2101 described in <Xref LinkEnd="sec-standard-targets">. It is complicated by the fact that you don't want all of
2102 these rules to be active in every <Filename>Makefile</Filename>. Rather than have a
2103 plethora of tiny files which you can include selectively, there is a
2104 single file, <Filename>target.mk</Filename>, which selectively includes rules based on
2105 whether you have defined certain variables in your <Filename>Makefile</Filename>. This
2106 section explains what rules you get, what variables control them, and
2107 what the rules do. Hopefully, you will also get enough of an idea of
2108 what is supposed to happen that you can read and understand any weird
2109 special cases yourself.
2116 <Term><Constant>HS_PROG</Constant><IndexTerm><Primary>HS_PROG</Primary></IndexTerm>.</Term>
2119 If <Constant>HS_PROG</Constant> is defined, you get
2120 rules with the following targets:
2124 <Term><Filename>HS_PROG</Filename><IndexTerm><Primary>HS_PROG</Primary></IndexTerm></Term>
2127 itself. This rule links <Constant>$(OBJS)</Constant>
2128 with the Haskell runtime system to get an executable called
2129 <Constant>$(HS_PROG)</Constant>.
2131 </ListItem></VarListEntry>
2133 <Term><Literal>install</Literal><IndexTerm><Primary>install</Primary></IndexTerm></Term>
2136 installs <Constant>$(HS_PROG)</Constant>
2137 in <Constant>$(bindir)</Constant>.
2139 </ListItem></VarListEntry>
2142 </ListItem></VarListEntry>
2144 <Term><Constant>C_PROG</Constant><IndexTerm><Primary>C_PROG</Primary></IndexTerm></Term>
2147 is similar to <Constant>HS_PROG</Constant>, except that
2148 the link step links <Constant>$(C_OBJS)</Constant> with the C runtime system.
2150 </ListItem></VarListEntry>
2152 <Term><Constant>LIBRARY</Constant><IndexTerm><Primary>LIBRARY</Primary></IndexTerm></Term>
2155 is similar to <Constant>HS_PROG</Constant>, except that
2156 it links <Constant>$(LIB_OBJS)</Constant> to make the library archive <Constant>$(LIBRARY)</Constant>, and
2157 <Literal>install</Literal> installs it in <Constant>$(libdir)</Constant>.
2159 </ListItem></VarListEntry>
2161 <Term><Constant>LIB_DATA</Constant><IndexTerm><Primary>LIB_DATA</Primary></IndexTerm></Term>
2166 </ListItem></VarListEntry>
2168 <Term><Constant>LIB_EXEC</Constant><IndexTerm><Primary>LIB_EXEC</Primary></IndexTerm></Term>
2173 </ListItem></VarListEntry>
2175 <Term><Constant>HS_SRCS</Constant><IndexTerm><Primary>HS_SRCS</Primary></IndexTerm>, <Constant>C_SRCS</Constant><IndexTerm><Primary>C_SRCS</Primary></IndexTerm>.</Term>
2178 If <Constant>HS_SRCS</Constant>
2179 is defined and non-empty, a rule for the target <Literal>depend</Literal> is included,
2180 which generates dependency information for Haskell programs.
2181 Similarly for <Constant>C_SRCS</Constant>.
2183 </ListItem></VarListEntry>
2188 All of these rules are ``double-colon'' rules, thus
2194 install :: $(HS_PROG)
2195 ...how to install it...
2201 GNU <Command>make</Command> treats double-colon rules as separate entities. If there
2202 are several double-colon rules for the same target it takes each in
2203 turn and fires it if its dependencies say to do so. This means that
2204 you can, for example, define both <Constant>HS_PROG</Constant> and <Constant>LIBRARY</Constant>, which will
2205 generate two rules for <Literal>install</Literal>. When you type <Command>gmake install</Command> both
2206 rules will be fired, and both the program and the library will be
2207 installed, just as you wanted.
2212 <Sect2 id="sec-subdirs">
2215 <IndexTerm><Primary>recursion, in makefiles</Primary></IndexTerm>
2216 <IndexTerm><Primary>Makefile, recursing into subdirectories</Primary></IndexTerm></Title>
2219 In leaf <Filename>Makefile</Filename>s the variable <Constant>SUBDIRS</Constant><IndexTerm><Primary>SUBDIRS</Primary></IndexTerm> is undefined.
2220 In non-leaf <Filename>Makefile</Filename>s, <Constant>SUBDIRS</Constant> is set to the list of
2221 sub-directories that contain subordinate <Filename>Makefile</Filename>s. <Emphasis>It is up to
2222 you to set <Constant>SUBDIRS</Constant> in the <Filename>Makefile</Filename>.</Emphasis> There is no automation here—<Constant>SUBDIRS</Constant> is too important to automate.
2226 When <Constant>SUBDIRS</Constant> is defined, <Filename>target.mk</Filename> includes a rather
2227 neat rule for the standard targets (<Xref LinkEnd="sec-standard-targets"> that simply invokes
2228 <Command>make</Command> recursively in each of the sub-directories.
2232 <Emphasis>These recursive invocations are guaranteed to occur in the order
2233 in which the list of directories is specified in <Constant>SUBDIRS</Constant>. </Emphasis>This
2234 guarantee can be important. For example, when you say <Command>gmake boot</Command> it
2235 can be important that the recursive invocation of <Command>make boot</Command> is done
2236 in one sub-directory (the include files, say) before another (the
2237 source files). Generally, put the most independent sub-directory
2238 first, and the most dependent last.
2243 <Sect2 id="sec-ways">
2244 <Title>Way management
2246 <IndexTerm><Primary>way management</Primary></IndexTerm></Title>
2249 We sometimes want to build essentially the same system in several
2250 different ``ways''. For example, we want to build GHC's <Literal>Prelude</Literal>
2251 libraries with and without profiling, with and without concurrency,
2252 and so on, so that there is an appropriately-built library archive to
2253 link with when the user compiles his program. It would be possible to
2254 have a completely separate build tree for each such ``way'', but it
2255 would be horribly bureaucratic, especially since often only parts of
2256 the build tree need to be constructed in multiple ways.
2260 Instead, the <Filename>target.mk</Filename><IndexTerm><Primary>target.mk</Primary></IndexTerm> contains some clever magic to
2261 allow you to build several versions of a system; and to control
2262 locally how many versions are built and how they differ. This section
2267 The files for a particular way are distinguished by munging the
2268 suffix. The ``normal way'' is always built, and its files have the
2269 standard suffices <Filename>.o</Filename>, <Filename>.hi</Filename>, and so on. In addition, you can build
2270 one or more extra ways, each distinguished by a <Emphasis>way tag</Emphasis>. The
2271 object files and interface files for one of these extra ways are
2272 distinguished by their suffix. For example, way <Literal>mp</Literal> has files
2273 <Filename>.mp_o</Filename> and <Filename>.mp_hi</Filename>. Library archives have their way tag the other
2274 side of the dot, for boring reasons; thus, <Filename>libHS_mp.a</Filename>.
2278 A <Command>make</Command> variable called <Constant>way</Constant> holds the current way tag. <Emphasis><Constant>way</Constant>
2279 is only ever set on the command line of a recursive invocation of
2280 <Command>gmake</Command>.</Emphasis> It is never set inside a <Filename>Makefile</Filename>. So it is a global
2281 constant for any one invocation of <Command>gmake</Command>. Two other <Command>make</Command>
2282 variables, <Constant>way_</Constant> and <Constant>_way</Constant> are immediately derived from <Constant>$(way)</Constant> and
2283 never altered. If <Constant>way</Constant> is not set, then neither are <Constant>way_</Constant> and
2284 <Constant>_way</Constant>, and the invocation of <Command>make</Command> will build the ``normal way''.
2285 If <Constant>way</Constant> is set, then the other two variables are set in sympathy.
2286 For example, if <Constant>$(way)</Constant> is ``<Literal>mp</Literal>'', then <Constant>way_</Constant> is set to ``<Literal>mp_</Literal>''
2287 and <Constant>_way</Constant> is set to ``<Literal>_mp</Literal>''. These three variables are then used
2288 when constructing file names.
2292 So how does <Command>make</Command> ever get recursively invoked with <Constant>way</Constant> set? There
2293 are two ways in which this happens:
2302 For some (but not all) of the standard targets, when in a leaf
2303 sub-directory, <Command>make</Command> is recursively invoked for each way tag in
2304 <Constant>$(WAYS)</Constant>. You set <Constant>WAYS</Constant> to the list of way tags you want these
2305 targets built for. The mechanism here is very much like the recursive
2306 invocation of <Command>make</Command> in sub-directories (<Xref LinkEnd="sec-subdirs">).
2308 It is up to you to set <Constant>WAYS</Constant> in your <Filename>Makefile</Filename>; this is how you
2309 control what ways will get built.
2315 For a useful collection of
2316 targets (such as <Filename>libHS_mp.a</Filename>, <Filename>Foo.mp_o</Filename>) there is a rule which
2317 recursively invokes <Command>make</Command> to make the specified target, setting the
2318 <Constant>way</Constant> variable. So if you say <Command>gmake Foo.mp_o</Command> you should see a
2319 recursive invocation <Command>gmake Foo.mp_o way=mp</Command>, and <Emphasis>in this
2320 recursive invocation the pattern rule for compiling a Haskell file
2321 into a <Filename>.o</Filename> file will match</Emphasis>. The key pattern rules (in <Filename>suffix.mk</Filename>)
2327 $(HC) $(HC_OPTS) $< -o $@
2342 <Title>When the canned rule isn't right</Title>
2345 Sometimes the canned rule just doesn't do the right thing. For
2346 example, in the <Literal>nofib</Literal> suite we want the link step to print out
2347 timing information. The thing to do here is <Emphasis>not</Emphasis> to define
2348 <Constant>HS_PROG</Constant> or <Constant>C_PROG</Constant>, and instead define a special purpose rule in
2349 your own <Filename>Makefile</Filename>. By using different variable names you will avoid
2350 the canned rules being included, and conflicting with yours.
2357 <Sect1 id="sec-booting-from-C">
2358 <Title>Booting/porting from C (<Filename>.hc</Filename>) files
2360 <IndexTerm><Primary>building GHC from .hc files</Primary></IndexTerm>
2361 <IndexTerm><Primary>booting GHC from .hc files</Primary></IndexTerm>
2362 <IndexTerm><Primary>porting GHC</Primary></IndexTerm></Title>
2365 This section is for people trying to get GHC going by using the
2366 supplied intermediate C (<Filename>.hc</Filename>) files. This would probably be because
2367 no binaries have been provided, or because the machine is not ``fully
2372 The intermediate C files are normally made available together with a
2373 source release, please check the announce message for exact directions
2374 of where to find them. If we haven't made them available or you
2375 can't find them, please ask.
2379 Assuming you've got them, unpack them on top of a fresh source tree.
2380 Then follow the `normal' instructions in <Xref LinkEnd="sec-building-from-source"> for setting
2381 up a build tree. When you invoke the configure script, you'll have
2382 to tell the script about your intentions:
2388 foo% ./configure --enable-hc-boot
2391 <IndexTerm><Primary>--enable-hc-boot</Primary></IndexTerm>
2392 <IndexTerm><Primary>--disable-hc-boot</Primary></IndexTerm>
2396 Assuming it configures OK and you don't need to create <Filename>mk/build.mk</Filename>
2397 for any other purposes, the next step is to proceed with a <Command>make boot</Command>
2398 followed by <Command>make all</Command>. At the successful completion of <Command>make all</Command>,
2399 you should end up with a binary of the compiler proper,
2400 <Filename>ghc/compiler/hsc</Filename>, plus archives (but no <Filename>.hi</Filename> files!) of the prelude
2401 libraries. To generate the Prelude interface files (and test drive the
2402 bootstrapped compiler), re-run the <Command>configure</Command> script, but this time
2403 without the <Option>--enable-hc-boot</Option> option. After that re-create the
2404 contents of <Filename>ghc/lib</Filename>:
2421 That's the mechanics of the boot process, but, of course, if you're
2422 trying to boot on a platform that is not supported and significantly
2423 `different' from any of the supported ones, this is only the start of
2424 the adventure…(ToDo: porting tips—stuff to look out for, etc.)
2429 <Sect1 id="sec-build-pitfalls">
2430 <Title>Known pitfalls in building Glasgow Haskell
2432 <IndexTerm><Primary>problems, building</Primary></IndexTerm>
2433 <IndexTerm><Primary>pitfalls, in building</Primary></IndexTerm>
2434 <IndexTerm><Primary>building pitfalls</Primary></IndexTerm></Title>
2437 WARNINGS about pitfalls and known ``problems'':
2446 One difficulty that comes up from time to time is running out of space
2447 in <Filename>/tmp</Filename>. (It is impossible for the configuration stuff to
2448 compensate for the vagaries of different sysadmin approaches to temp
2450 <IndexTerm><Primary>tmp, running out of space in</Primary></IndexTerm>
2452 The quickest way around it is <Command>setenv TMPDIR /usr/tmp</Command><IndexTerm><Primary>TMPDIR</Primary></IndexTerm> or
2453 even <Command>setenv TMPDIR .</Command> (or the equivalent incantation with your shell
2456 The best way around it is to say
2459 export TMPDIR=<dir>
2462 in your <Filename>build.mk</Filename> file.
2463 Then GHC and the other <Literal>fptools</Literal> programs will use the appropriate directory
2472 In compiling some support-code bits, e.g., in <Filename>ghc/rts/gmp</Filename> and even
2473 in <Filename>ghc/lib</Filename>, you may get a few C-compiler warnings. We think these
2481 When compiling via C, you'll sometimes get ``warning: assignment from
2482 incompatible pointer type'' out of GCC. Harmless.
2489 Similarly, <Command>ar</Command>chiving warning messages like the following are not
2493 ar: filename GlaIOMonad__1_2s.o truncated to GlaIOMonad_
2494 ar: filename GlaIOMonad__2_2s.o truncated to GlaIOMonad_
2504 In compiling the compiler proper (in <Filename>compiler/</Filename>), you <Emphasis>may</Emphasis>
2505 get an ``Out of heap space'' error message. These can vary with the
2506 vagaries of different systems, it seems. The solution is simple:
2513 If you're compiling with GHC 4.00 or later, then the
2514 <Emphasis>maximum</Emphasis> heap size must have been reached. This
2515 is somewhat unlikely, since the maximum is set to 64M by default.
2516 Anyway, you can raise it with the
2517 <Option>-optCrts-M<size></Option> flag (add this flag to
2518 <Constant><module>_HC_OPTS</Constant>
2519 <Command>make</Command> variable in the appropriate
2520 <Filename>Makefile</Filename>).
2527 For GHC < 4.00, add a suitable <Option>-H</Option> flag to the <Filename>Makefile</Filename>, as
2536 and try again: <Command>gmake</Command>. (see <Xref LinkEnd="sec-suffix"> for information about
2537 <Constant><module>_HC_OPTS</Constant>.)
2539 Alternatively, just cut to the chase:
2543 % make EXTRA_HC_OPTS=-optCrts-M128M
2552 If you try to compile some Haskell, and you get errors from GCC about
2553 lots of things from <Filename>/usr/include/math.h</Filename>, then your GCC was
2554 mis-installed. <Command>fixincludes</Command> wasn't run when it should've been.
2556 As <Command>fixincludes</Command> is now automagically run as part of GCC installation,
2557 this bug also suggests that you have an old GCC.
2565 You <Emphasis>may</Emphasis> need to re-<Command>ranlib</Command><IndexTerm><Primary>ranlib</Primary></IndexTerm> your libraries (on Sun4s).
2569 % cd $(libdir)/ghc-x.xx/sparc-sun-sunos4
2570 % foreach i ( `find . -name '*.a' -print` ) # or other-shell equiv...
2572 ? # or, on some machines: ar s $i
2577 We'd be interested to know if this is still necessary.
2585 GHC's sources go through <Command>cpp</Command> before being compiled, and <Command>cpp</Command> varies
2586 a bit from one Unix to another. One particular gotcha is macro calls
2591 SLIT("Hello, world")
2595 Some <Command>cpp</Command>s treat the comma inside the string as separating two macro
2596 arguments, so you get
2600 :731: macro `SLIT' used with too many (2) args
2604 Alas, <Command>cpp</Command> doesn't tell you the offending file!
2606 Workaround: don't put weird things in string args to <Command>cpp</Command> macros.
2617 <Sect1 id="winbuild"><Title>Notes for building under Windows</Title>
2620 This section summarises how to get the utilities you need on your
2621 Win95/98/NT/2000 machine to use CVS and build GHC. Similar notes for installing and running GHC may be found in the user guide. In general, Win95/Win98 behave the same, and WinNT/Win2k behave the same. It is based largely on detailed advice from Sigbjørn Finne.
2625 <Sect2><Title>Installing ssh</Title>
2631 Extract the whole of <ULink URL="http://research.microsoft.com/~simonpj/ssh-1_2_26-cygwinb19.tar.gz">the ssh archive</ULink> into your <Filename>C:\</Filename> directory, and use the ``All files'' and ``User folder names'' options in WinZip extract dialogue box. This populates your <Filename>C:\usr\local</Filename> tree.
2637 Extract <ULink URL="http://research.microsoft.com/~simonpj/cygwinb19.dll.zip">cygwinb19.dll</ULink> into <Filename>/usr/local/bin</Filename>. The current version
2638 of Cywin is b20, but this version of ssh was compiled with b19.
2644 On a Win2k machine, open up a bash and do
2649 foo$ mkpasswd -l > passwd
2653 Check that your login entry is on the first line
2654 of that file. If not, move it to the top. It's OK
2655 for 'Administrator' to be the first entry, assuming you are one.
2659 However, Win9x doesn't support the calls that <Command>mkpasswd</Command> relies on
2660 (e.g., <Function>NetUserEnum</Function>). If you run <Command>mkpasswd</Command> you
2665 linked to missing export netapi32.dll:NetUserEnum
2669 The passwd file is used
2670 by ssh in a fairly rudimentary manner, so I'd simply
2671 synthesise/copy an existing Unix <Filename>/etc/passwd</Filename>, i.e., create
2672 an <Filename>/etc/passwd</Filename> file containing the line
2676 <login>::500:513:::/bin/sh
2680 where <Literal><login></Literal> is your login id.
2686 Generate a key, by running <Filename>c:/user/local/bin/ssh-keygen1</Filename>.
2687 This generates a public key in <Filename>.ssh/identity.pub</Filename>, and a
2688 private key in <Filename>.ssh/identity</Filename>
2692 In response to the 'Enter passphrase' question, just hit
2693 return (i.e. use an empty passphrase). The passphrase is
2694 a password that protects your private key. But it's a pain
2695 to type this passphrase everytime you use <Command>ssh</Command>, so the best
2696 thing to do is simply to protect your <Filename>.ssh</Filename> directory, and
2697 <Filename>.ssh/identity</Filename> from access by anyone else. To do this
2698 right-click your <Filename>.ssh</Filename> directory, and select Properties.
2699 If you are not on the access control list, add yourself, and
2700 give yourself full permissions (the second panel).
2701 Remove everyone else from the access control list. (Don't
2702 leave them there but deny them access, because 'they' may be
2703 a list that includes you!)
2707 If you have problems running <Command>ssh-keygen1</Command>
2708 from within <Command>bash</Command>, start up <Filename>cmd.exe</Filename> and run it as follows:
2712 c:\tmp> set CYGWIN32=tty
2713 c:\tmp> c:/user/local/bin/ssh-keygen1
2719 If you don't have an account on <Literal>cvs.haskell.org</Literal>, send
2720 your <Filename>.ssh/identity.pub</Filename> to the CVS repository administrator
2721 (currently Jeff Lewis <Email>jlewis@cse.ogi.edu</Email>). He will set up
2726 If you do have an account on <Literal>cvs.haskell.org</Literal>, use TeraTerm
2727 to logon to it. Once in, copy the
2728 key that <Command>ssh-keygen1</Command> deposited in <Filename>/.ssh/identity.pub</Filename> into
2729 your <Filename>~/.ssh/authorized_keys</Filename>. Make sure that the new version
2730 of <Filename>authorized_keys</Filename> still has 600 file permission.
2739 <Sect2><Title>Installing CVS</Title>
2746 <ULink URL="http://research.microsoft.com/~simonpj/cvs-1_10-win.zip">
2747 CVS</ULink> and, following the instructions in the <Filename>README</Filename>, copy the
2748 appropriate files into <Filename>/usr/local/bin</Filename>.
2754 From the System control panel,
2755 set the following <Emphasis>user</Emphasis> environment variables (see the GHC user guide)
2761 <Constant>HOME</Constant>: points to your home directory. This is where CVS
2762 will look for its <Filename>.cvsrc</Filename> file.
2768 <Constant>CVS_RSH</Constant>: <Filename>c:/usr/local/bin/ssh1</Filename>
2774 <Constant>CVSROOT</Constant>: <Literal>:ext:username@cvs.haskell.org:/home/cvs/root</Literal>,
2775 where <Literal>username</Literal> is your userid
2781 <Constant>CVSEDITOR</Constant>: <Filename>bin/gnuclient.exe</Filename> if you want to use an Emacs buffer for typing in those long commit messages.
2789 Put the following in <Filename>$HOME/.cvsrc</Filename>:
2800 These are the default options for the specified CVS commands,
2801 and represent better defaults than the usual ones. (Feel
2802 free to change them.)
2806 Filenames starting with "<Filename>.</Filename>" were illegal in
2807 the 8.3 DOS filesystem, but that restriction should have
2808 been lifted by now (i.e., you're using VFAT or later filesystems.) If
2809 you're still having problems creating it, don't worry; <Filename>.cvsrc</Filename> is entirely
2816 Try doing <Command>cvs co fpconfig</Command>. All being well, bytes should
2817 start to trickle through, leaving a directory <Filename>fptools</Filename>
2818 in your current directory. (You can <Command>rm</Command> it if you don't want to keep it.) The following messages appear to be harmless:
2822 setsockopt IPTOS_LOWDELAY: Invalid argument
2823 setsockopt IPTOS_THROUGHPUT: Invalid argument
2827 At this point I found that CVS tried to invoke a little dialogue with
2828 me (along the lines of `do you want to talk to this host'), but
2829 somehow bombed out. This was from a bash shell running in emacs.
2830 I solved this by invoking a Cygnus shell, and running CVS from there.
2831 Once things are dialogue free, it seems to work OK from within emacs.
2837 If you want to check out part of large tree, proceed as follows:
2841 cvs -f checkout -l papers
2847 This sequence checks out the <Literal>papers</Literal> module, but none
2848 of its sub-directories.
2849 The "<Option>-l</Option>" flag says not to check out sub-directories.
2850 The "<Option>-f</Option>" flag says not to read the <Filename>.cvsrc</Filename> file
2851 whose <Option>-P</Option> default (don't check out empty directories) is
2856 The <Command>cvs update</Command> command sucks in a named sub-directory.
2863 There is a very nice graphical front-end to CVS for Win32 platforms,
2864 with a UI that people will be familiar with, at
2865 <ULink URL="http://www.wincvs.org/">wincvs.org</ULink>.
2866 I have not tried it yet.
2872 <Sect2><Title>Installing autoconf</Title>
2875 Only required if you are doing builds from GHC's sources
2876 checked out from the CVS tree.
2882 Fetch the (standard, Unix) <Command>autoconf</Command> distribution from
2883 <ULink URL="ftp://ftp.gnu.org/gnu/autoconf">ftp.gnu.org</ULink>.
2888 Unpack it into an arbitrary directory.
2893 Make sure that the directory <Filename>/usr/local/bin</Filename> exists.
2898 Say "<Filename>./configure</Filename>".
2903 Now <Command>make install</Command>. This should put <Filename>autoheader</Filename>
2904 and <Filename>autoconf</Filename> in <Filename>/usr/local/bin</Filename>.
2910 <Command>autoheader</Command> doesn't seem to work, but you don't need it
2917 <Sect2><Title>Building GHC</Title>
2923 In the <Filename>./configure</Filename> output, ignore
2925 checking whether #! works in shell scripts...
2926 ./configure: ./conftest: No such file or directory</Literal>",
2927 and "<Literal>not updating unwritable cache ./config.cache</Literal>".
2928 Nobody knows why these happen, but they seem to be harmless.
2934 You have to run <Command>autoconf</Command> both in <Filename>fptools</Filename>
2935 and in <Filename>fptools/ghc</Filename>. If you omit the latter step you'll
2936 get an error when you run <Filename>./configure</Filename>:
2941 creating mk/config.h
2942 mk/config.h is unchanged
2944 running /bin/sh ./configure --cache-file=.././config.cache --srcdir=.
2945 ./configure: ./configure: No such file or directory
2946 configure: error: ./configure failed for ghc
2952 You need <Filename>ghc</Filename> to be in your <Constant>PATH</Constant> before you run
2953 <Command>configure</Command>. The default GHC InstallShield creates only
2954 <Filename>ghc-4.05</Filename>, so you may need to duplicate this file as <Filename>ghc</Filename>
2955 in the same directory, in order that <Command>configure</Command> will see it (or
2956 just rename <Filename>ghc-4.05</Filename> to <Filename>ghc</Filename>.
2957 And make sure that the directory is in your path.
2963 Compile <Command>happy</Command> and <Command>ghc</Command>
2964 with <Option>-static</Option>. To do this, set
2973 in your <Filename>build.mk</Filename> file.
2974 [Actually, I successfully compiled Happy without <Option>-static</Option> on Win2k, but not GHC.]