[ghc-hetmet.git] / ghc / compiler / simplCore / OccurAnal.lhs

%
% (c) The GRASP/AQUA Project, Glasgow University, 1992-1998
%
%************************************************************************
%*                                                                      *
\section[OccurAnal]{Occurrence analysis pass}
%*                                                                      *
%************************************************************************

The occurrence analyser re-typechecks a core expression, returning a new
core expression with (hopefully) improved usage information.

\begin{code}
module OccurAnal (
        occurAnalyseBinds, occurAnalyseGlobalExpr, occurAnalyseRule
    ) where

#include "HsVersions.h"

import CoreSyn
import CoreFVs          ( idRuleVars )
import CoreUtils        ( exprIsTrivial )
import Id               ( isDataConId, isOneShotLambda, setOneShotLambda, 
                          idOccInfo, setIdOccInfo,
                          isExportedId, modifyIdInfo, idInfo, idArity,
                          idSpecialisation, isLocalId,
                          idType, idUnique, Id
                        )
import IdInfo           ( copyIdInfo )
import BasicTypes       ( OccInfo(..), isOneOcc )

import VarSet
import VarEnv

import Type             ( splitFunTy_maybe, splitForAllTys )
import Maybes           ( maybeToBool, orElse )
import Digraph          ( stronglyConnCompR, SCC(..) )
import PrelNames        ( buildIdKey, foldrIdKey, runSTRepIdKey, augmentIdKey )
import Unique           ( Unique )
import UniqFM           ( keysUFM )  
import Util             ( zipWithEqual, mapAndUnzip )
import Outputable
\end{code}


%************************************************************************
%*                                                                      *
\subsection[OccurAnal-main]{Counting occurrences: main function}
%*                                                                      *
%************************************************************************

Here's the externally-callable interface:

\begin{code}
occurAnalyseGlobalExpr :: CoreExpr -> CoreExpr
occurAnalyseGlobalExpr expr
  =     -- Top level expr, so no interesting free vars, and
        -- discard occurence info returned
    snd (occAnal (initOccEnv emptyVarSet) expr)

occurAnalyseRule :: CoreRule -> CoreRule
occurAnalyseRule rule@(BuiltinRule _ _) = rule
occurAnalyseRule (Rule str act tpl_vars tpl_args rhs)
                -- Add occ info to tpl_vars, rhs
  = Rule str act tpl_vars' tpl_args rhs'
  where
    (rhs_uds, rhs') = occAnal (initOccEnv (mkVarSet tpl_vars)) rhs
    (_, tpl_vars')  = tagBinders rhs_uds tpl_vars
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Top level stuff}
%*                                                                      *
%************************************************************************

In @occAnalTop@ we do indirection-shorting.  That is, if we have this:

        x_local = <expression>
        ...
        x_exported = loc

where exp is exported, and loc is not, then we replace it with this:

        x_local = x_exported
        x_exported = <expression>
        ...

Without this we never get rid of the x_exported = x_local thing.  This
save a gratuitous jump (from \tr{x_exported} to \tr{x_local}), and
makes strictness information propagate better.  This used to happen in
the final phase, but it's tidier to do it here.

If more than one exported thing is equal to a local thing (i.e., the
local thing really is shared), then we do one only:
\begin{verbatim}
        x_local = ....
        x_exported1 = x_local
        x_exported2 = x_local
==>
        x_exported1 = ....

        x_exported2 = x_exported1
\end{verbatim}

We rely on prior eta reduction to simplify things like
\begin{verbatim}
        x_exported = /\ tyvars -> x_local tyvars
==>
        x_exported = x_local
\end{verbatim}
Hence,there's a possibility of leaving unchanged something like this:
\begin{verbatim}
        x_local = ....
        x_exported1 = x_local Int
\end{verbatim}
By the time we've thrown away the types in STG land this 
could be eliminated.  But I don't think it's very common
and it's dangerous to do this fiddling in STG land 
because we might elminate a binding that's mentioned in the
unfolding for something.

\begin{code}
occurAnalyseBinds :: [CoreBind] -> [CoreBind]

occurAnalyseBinds binds
  = binds'
  where
    (_, _, binds') = go (initOccEnv emptyVarSet) binds

    go :: OccEnv -> [CoreBind]
       -> (UsageDetails,        -- Occurrence info
           IdEnv Id,            -- Indirection elimination info
                                --   Maps local-id -> exported-id, but it embodies
                                --   bindings of the form exported-id = local-id in
                                --   the argument to go
           [CoreBind])          -- Occ-analysed bindings, less the exported-id=local-id ones

    go env [] = (emptyDetails, emptyVarEnv, [])

    go env (bind : binds)
      = let
            new_env                        = env `addNewCands` (bindersOf bind)
            (scope_usage, ind_env, binds') = go new_env binds
            (final_usage, new_binds)       = occAnalBind env (zapBind ind_env bind) scope_usage
                                                -- NB: I zap before occur-analysing, so
                                                -- I don't need to worry about getting the
                                                -- occ info on the new bindings right.
        in
        case bind of
            NonRec exported_id (Var local_id) 
                | shortMeOut ind_env exported_id local_id
                -- Special case for eliminating indirections
                --   Note: it's a shortcoming that this only works for
                --         non-recursive bindings.  Elminating indirections
                --         makes perfect sense for recursive bindings too, but
                --         it's more complicated to implement, so I haven't done so
                -> (scope_usage, ind_env', binds')
                where
                   ind_env' = extendVarEnv ind_env local_id exported_id

            other ->    -- Ho ho! The normal case
                     (final_usage, ind_env, new_binds ++ binds')
                   

-- Deal with any indirections
zapBind ind_env (NonRec bndr rhs) 
  | bndr `elemVarEnv` ind_env                      = Rec (zap ind_env (bndr,rhs))
                -- The Rec isn't strictly necessary, but it's convenient
zapBind ind_env (Rec pairs)
  | or [id `elemVarEnv` ind_env | (id,_) <- pairs] = Rec (concat (map (zap ind_env) pairs))

zapBind ind_env bind = bind

zap ind_env pair@(local_id,rhs)
  = case lookupVarEnv ind_env local_id of
        Nothing          -> [pair]
        Just exported_id -> [(local_id, Var exported_id),
                             (exported_id', rhs)]
                         where
                            exported_id' = modifyIdInfo (copyIdInfo (idInfo local_id)) exported_id
                        
shortMeOut ind_env exported_id local_id
-- The if-then-else stuff is just so I can get a pprTrace to see
-- how often I don't get shorting out becuase of IdInfo stuff
  = if isExportedId exported_id &&              -- Only if this is exported

       isLocalId local_id &&                    -- Only if this one is defined in this
                                                --      module, so that we *can* change its
                                                --      binding to be the exported thing!

       not (isExportedId local_id) &&           -- Only if this one is not itself exported,
                                                --      since the transformation will nuke it
   
       not (local_id `elemVarEnv` ind_env)      -- Only if not already substituted for
    then
        True

{- No longer needed
        if shortableIdInfo (idInfo exported_id)         -- Only if its IdInfo is 'shortable'
                                                        -- (see the defn of IdInfo.shortableIdInfo)
        then True
        else 
#ifdef DEBUG 
          pprTrace "shortMeOut:" (ppr exported_id)
#endif
                                                False
-}
    else
        False
\end{code}


%************************************************************************
%*                                                                      *
\subsection[OccurAnal-main]{Counting occurrences: main function}
%*                                                                      *
%************************************************************************

Bindings
~~~~~~~~

\begin{code}
type IdWithOccInfo = Id                 -- An Id with fresh PragmaInfo attached

type Node details = (details, Unique, [Unique]) -- The Ints are gotten from the Unique,
                                                -- which is gotten from the Id.
type Details1     = (Id, UsageDetails, CoreExpr)
type Details2     = (IdWithOccInfo, CoreExpr)


occAnalBind :: OccEnv
            -> CoreBind
            -> UsageDetails             -- Usage details of scope
            -> (UsageDetails,           -- Of the whole let(rec)
                [CoreBind])

occAnalBind env (NonRec binder rhs) body_usage
  | not (binder `usedIn` body_usage)            -- It's not mentioned
  = (body_usage, [])

  | otherwise                   -- It's mentioned in the body
  = (final_body_usage `combineUsageDetails` rhs_usage,
     [NonRec tagged_binder rhs'])

  where
    (final_body_usage, tagged_binder) = tagBinder body_usage binder
    (rhs_usage, rhs')                 = occAnalRhs env binder rhs
\end{code}

Dropping dead code for recursive bindings is done in a very simple way:

        the entire set of bindings is dropped if none of its binders are
        mentioned in its body; otherwise none are.

This seems to miss an obvious improvement.
@
        letrec  f = ...g...
                g = ...f...
        in
        ...g...

===>

        letrec f = ...g...
               g = ...(...g...)...
        in
        ...g...
@

Now @f@ is unused. But dependency analysis will sort this out into a
@letrec@ for @g@ and a @let@ for @f@, and then @f@ will get dropped.
It isn't easy to do a perfect job in one blow.  Consider

@
        letrec f = ...g...
               g = ...h...
               h = ...k...
               k = ...m...
               m = ...m...
        in
        ...m...
@


\begin{code}
occAnalBind env (Rec pairs) body_usage
  = foldr (_scc_ "occAnalBind.dofinal" do_final_bind) (body_usage, []) sccs
  where
    binders = map fst pairs
    rhs_env = env `addNewCands` binders

    analysed_pairs :: [Details1]
    analysed_pairs  = [ (bndr, rhs_usage, rhs')
                      | (bndr, rhs) <- pairs,
                        let (rhs_usage, rhs') = occAnalRhs rhs_env bndr rhs
                      ]

    sccs :: [SCC (Node Details1)]
    sccs = _scc_ "occAnalBind.scc" stronglyConnCompR edges


    ---- stuff for dependency analysis of binds -------------------------------
    edges :: [Node Details1]
    edges = _scc_ "occAnalBind.assoc"
            [ (details, idUnique id, edges_from rhs_usage)
            | details@(id, rhs_usage, rhs) <- analysed_pairs
            ]

        -- (a -> b) means a mentions b
        -- Given the usage details (a UFM that gives occ info for each free var of
        -- the RHS) we can get the list of free vars -- or rather their Int keys --
        -- by just extracting the keys from the finite map.  Grimy, but fast.
        -- Previously we had this:
        --      [ bndr | bndr <- bndrs,
        --               maybeToBool (lookupVarEnv rhs_usage bndr)]
        -- which has n**2 cost, and this meant that edges_from alone 
        -- consumed 10% of total runtime!
    edges_from :: UsageDetails -> [Unique]
    edges_from rhs_usage = _scc_ "occAnalBind.edges_from"
                           keysUFM rhs_usage

    ---- stuff to "re-constitute" bindings from dependency-analysis info ------

        -- Non-recursive SCC
    do_final_bind (AcyclicSCC ((bndr, rhs_usage, rhs'), _, _)) (body_usage, binds_so_far)
      | not (bndr `usedIn` body_usage)
      = (body_usage, binds_so_far)                      -- Dead code
      | otherwise
      = (combined_usage, new_bind : binds_so_far)       
      where
        total_usage                   = combineUsageDetails body_usage rhs_usage
        (combined_usage, tagged_bndr) = tagBinder total_usage bndr
        new_bind                      = NonRec tagged_bndr rhs'

        -- Recursive SCC
    do_final_bind (CyclicSCC cycle) (body_usage, binds_so_far)
      | not (any (`usedIn` body_usage) bndrs)           -- NB: look at body_usage, not total_usage
      = (body_usage, binds_so_far)                      -- Dead code
      | otherwise
      = (combined_usage, final_bind:binds_so_far)
      where
        details                        = [details   | (details, _, _) <- cycle]
        bndrs                          = [bndr      | (bndr, _, _)      <- details]
        rhs_usages                     = [rhs_usage | (_, rhs_usage, _) <- details]
        total_usage                    = foldr combineUsageDetails body_usage rhs_usages
        (combined_usage, tagged_bndrs) = tagBinders total_usage bndrs
        final_bind                     = Rec (reOrderRec env new_cycle)

        new_cycle = CyclicSCC (zipWithEqual "occAnalBind" mk_new_bind tagged_bndrs cycle)
        mk_new_bind tagged_bndr ((_, _, rhs'), key, keys) = ((tagged_bndr, rhs'), key, keys)
\end{code}

@reOrderRec@ is applied to the list of (binder,rhs) pairs for a cyclic
strongly connected component (there's guaranteed to be a cycle).  It returns the
same pairs, but 
        a) in a better order,
        b) with some of the Ids having a IMustNotBeINLINEd pragma

The "no-inline" Ids are sufficient to break all cycles in the SCC.  This means
that the simplifier can guarantee not to loop provided it never records an inlining
for these no-inline guys.

Furthermore, the order of the binds is such that if we neglect dependencies
on the no-inline Ids then the binds are topologically sorted.  This means
that the simplifier will generally do a good job if it works from top bottom,
recording inlinings for any Ids which aren't marked as "no-inline" as it goes.

==============
[June 98: I don't understand the following paragraphs, and I've 
          changed the a=b case again so that it isn't a special case any more.]

Here's a case that bit me:

        letrec
                a = b
                b = \x. BIG
        in
        ...a...a...a....

Re-ordering doesn't change the order of bindings, but there was no loop-breaker.

My solution was to make a=b bindings record b as Many, rather like INLINE bindings.
Perhaps something cleverer would suffice.
===============

You might think that you can prevent non-termination simply by making
sure that we simplify a recursive binding's RHS in an environment that
simply clones the recursive Id.  But no.  Consider

                letrec f = \x -> let z = f x' in ...

                in
                let n = f y
                in
                case n of { ... }

We bind n to its *simplified* RHS, we then *re-simplify* it when
we inline n.  Then we may well inline f; and then the same thing
happens with z!

I don't think it's possible to prevent non-termination by environment
manipulation in this way.  Apart from anything else, successive
iterations of the simplifier may unroll recursive loops in cases like
that above.  The idea of beaking every recursive loop with an
IMustNotBeINLINEd pragma is much much better.


\begin{code}
reOrderRec
        :: OccEnv
        -> SCC (Node Details2)
        -> [Details2]
                        -- Sorted into a plausible order.  Enough of the Ids have
                        --      dontINLINE pragmas that there are no loops left.

        -- Non-recursive case
reOrderRec env (AcyclicSCC (bind, _, _)) = [bind]

        -- Common case of simple self-recursion
reOrderRec env (CyclicSCC [bind])
  = [(setIdOccInfo tagged_bndr IAmALoopBreaker, rhs)]
  where
    ((tagged_bndr, rhs), _, _) = bind

reOrderRec env (CyclicSCC (bind : binds))
  =     -- Choose a loop breaker, mark it no-inline,
        -- do SCC analysis on the rest, and recursively sort them out
    concat (map (reOrderRec env) (stronglyConnCompR unchosen))
    ++ 
    [(setIdOccInfo tagged_bndr IAmALoopBreaker, rhs)]

  where
    (chosen_pair, unchosen) = choose_loop_breaker bind (score bind) [] binds
    (tagged_bndr, rhs)      = chosen_pair

        -- This loop looks for the bind with the lowest score
        -- to pick as the loop  breaker.  The rest accumulate in 
    choose_loop_breaker (details,_,_) loop_sc acc []
        = (details, acc)        -- Done

    choose_loop_breaker loop_bind loop_sc acc (bind : binds)
        | sc < loop_sc  -- Lower score so pick this new one
        = choose_loop_breaker bind sc (loop_bind : acc) binds

        | otherwise     -- No lower so don't pick it
        = choose_loop_breaker loop_bind loop_sc (bind : acc) binds
        where
          sc = score bind
          
    score :: Node Details2 -> Int       -- Higher score => less likely to be picked as loop breaker
    score ((bndr, rhs), _, _)
        | exprIsTrivial rhs        = 4  -- Practically certain to be inlined
                -- Used to have also: && not (isExportedId bndr)
                -- But I found this sometimes cost an extra iteration when we have
                --      rec { d = (a,b); a = ...df...; b = ...df...; df = d }
                -- where df is the exported dictionary. Then df makes a really
                -- bad choice for loop breaker
          
        | not_fun_ty (idType bndr) = 3  -- Data types help with cases
                -- This used to have a lower score than inlineCandidate, but
                -- it's *really* helpful if dictionaries get inlined fast,
                -- so I'm experimenting with giving higher priority to data-typed things

        | inlineCandidate bndr rhs = 2  -- Likely to be inlined

        | not (isEmptyCoreRules (idSpecialisation bndr)) = 1
                -- Avoid things with specialisations; we'd like
                -- to take advantage of them in the subsequent bindings

        | otherwise = 0

    inlineCandidate :: Id -> CoreExpr -> Bool
    inlineCandidate id (Note InlineMe _) = True
    inlineCandidate id rhs               = isOneOcc (idOccInfo id)

        -- Real example (the Enum Ordering instance from PrelBase):
        --      rec     f = \ x -> case d of (p,q,r) -> p x
        --              g = \ x -> case d of (p,q,r) -> q x
        --              d = (v, f, g)
        --
        -- Here, f and g occur just once; but we can't inline them into d.
        -- On the other hand we *could* simplify those case expressions if
        -- we didn't stupidly choose d as the loop breaker.
        -- But we won't because constructor args are marked "Many".

    not_fun_ty ty = not (maybeToBool (splitFunTy_maybe rho_ty))
                  where
                    (_, rho_ty) = splitForAllTys ty
\end{code}

@occAnalRhs@ deals with the question of bindings where the Id is marked
by an INLINE pragma.  For these we record that anything which occurs
in its RHS occurs many times.  This pessimistically assumes that ths
inlined binder also occurs many times in its scope, but if it doesn't
we'll catch it next time round.  At worst this costs an extra simplifier pass.
ToDo: try using the occurrence info for the inline'd binder.

[March 97] We do the same for atomic RHSs.  Reason: see notes with reOrderRec.
[June 98, SLPJ]  I've undone this change; I don't understand it.  See notes with reOrderRec.


\begin{code}
occAnalRhs :: OccEnv
           -> Id -> CoreExpr    -- Binder and rhs
           -> (UsageDetails, CoreExpr)

occAnalRhs env id rhs
  = (final_usage, rhs')
  where
    (rhs_usage, rhs') = occAnal (rhsCtxt env) rhs
        -- Note that we use an rhsCtxt.  This tells the occ anal that it's
        -- looking at an RHS, which has an effect in occAnalApp
        --
        -- But there's a problem.  Consider
        --      x1 = a0 : []
        --      x2 = a1 : x1
        --      x3 = a2 : x2
        --      g  = f x2
        -- First time round, it looks as if x1 and x2 occur as an arg of a 
        -- let-bound constructor ==> give them a many-occurrence.
        -- But then x3 is inlined (unconditionally as it happens) and
        -- next time round, x2 will be, and the next time round x1 will be
        -- Result: multiple simplifier iterations.  Sigh.  
        -- Possible solution: use rhsCtxt for things that occur just once...

        -- [March 98] A new wrinkle is that if the binder has specialisations inside
        -- it then we count the specialised Ids as "extra rhs's".  That way
        -- the "parent" keeps the specialised "children" alive.  If the parent
        -- dies (because it isn't referenced any more), then the children will
        -- die too unless they are already referenced directly.

    final_usage = foldVarSet add rhs_usage (idRuleVars id)
    add v u = addOneOcc u v NoOccInfo           -- Give a non-committal binder info
                                                -- (i.e manyOcc) because many copies
                                                -- of the specialised thing can appear
\end{code}

Expressions
~~~~~~~~~~~
\begin{code}
occAnal :: OccEnv
        -> CoreExpr
        -> (UsageDetails,       -- Gives info only about the "interesting" Ids
            CoreExpr)

occAnal env (Type t)  = (emptyDetails, Type t)

occAnal env (Var v) 
  = (var_uds, Var v)
  where
    var_uds | isCandidate env v = unitVarEnv v oneOcc
            | otherwise         = emptyDetails

    -- At one stage, I gathered the idRuleVars for v here too,
    -- which in a way is the right thing to do.
    -- But that went wrong right after specialisation, when
    -- the *occurrences* of the overloaded function didn't have any
    -- rules in them, so the *specialised* versions looked as if they
    -- weren't used at all.

\end{code}

We regard variables that occur as constructor arguments as "dangerousToDup":

\begin{verbatim}
module A where
f x = let y = expensive x in 
      let z = (True,y) in 
      (case z of {(p,q)->q}, case z of {(p,q)->q})
\end{verbatim}

We feel free to duplicate the WHNF (True,y), but that means
that y may be duplicated thereby.

If we aren't careful we duplicate the (expensive x) call!
Constructors are rather like lambdas in this way.

\begin{code}
occAnal env expr@(Lit lit) = (emptyDetails, expr)
\end{code}

\begin{code}
occAnal env (Note InlineMe body)
  = case occAnal env body of { (usage, body') -> 
    (mapVarEnv markMany usage, Note InlineMe body')
    }

occAnal env (Note note@(SCC cc) body)
  = case occAnal env body of { (usage, body') ->
    (mapVarEnv markInsideSCC usage, Note note body')
    }

occAnal env (Note note body)
  = case occAnal env body of { (usage, body') ->
    (usage, Note note body')
    }
\end{code}

\begin{code}
occAnal env app@(App fun arg)
  = occAnalApp env (collectArgs app) False

-- Ignore type variables altogether
--   (a) occurrences inside type lambdas only not marked as InsideLam
--   (b) type variables not in environment

occAnal env expr@(Lam x body) | isTyVar x
  = case occAnal env body of { (body_usage, body') ->
    (body_usage, Lam x body')
    }

-- For value lambdas we do a special hack.  Consider
--      (\x. \y. ...x...)
-- If we did nothing, x is used inside the \y, so would be marked
-- as dangerous to dup.  But in the common case where the abstraction
-- is applied to two arguments this is over-pessimistic.
-- So instead, we just mark each binder with its occurrence
-- info in the *body* of the multiple lambda.
-- Then, the simplifier is careful when partially applying lambdas.

occAnal env expr@(Lam _ _)
  = case occAnal env_body body of { (body_usage, body') ->
    let
        (final_usage, tagged_binders) = tagBinders body_usage binders
        --      URGH!  Sept 99: we don't seem to be able to use binders' here, because
        --      we get linear-typed things in the resulting program that we can't handle yet.
        --      (e.g. PrelShow)  TODO 

        really_final_usage = if linear then
                                final_usage
                             else
                                mapVarEnv markInsideLam final_usage
    in
    (really_final_usage,
     mkLams tagged_binders body') }
  where
    (binders, body)   = collectBinders expr
    (linear, env1, _) = oneShotGroup env binders
    env2              = env1 `addNewCands` binders      -- Add in-scope binders
    env_body          = vanillaCtxt env2                -- Body is (no longer) an RhsContext

occAnal env (Case scrut bndr alts)
  = case mapAndUnzip (occAnalAlt alt_env bndr) alts of { (alts_usage_s, alts')   -> 
    case occAnal (vanillaCtxt env) scrut                    of { (scrut_usage, scrut') ->
        -- No need for rhsCtxt
    let
        alts_usage  = foldr1 combineAltsUsageDetails alts_usage_s
        alts_usage' = addCaseBndrUsage alts_usage
        (alts_usage1, tagged_bndr) = tagBinder alts_usage' bndr
        total_usage = scrut_usage `combineUsageDetails` alts_usage1
    in
    total_usage `seq` (total_usage, Case scrut' tagged_bndr alts') }}
  where
    alt_env = env `addNewCand` bndr

        -- The case binder gets a usage of either "many" or "dead", never "one".
        -- Reason: we like to inline single occurrences, to eliminate a binding,
        -- but inlining a case binder *doesn't* eliminate a binding.
        -- We *don't* want to transform
        --      case x of w { (p,q) -> f w }
        -- into
        --      case x of w { (p,q) -> f (p,q) }
    addCaseBndrUsage usage = case lookupVarEnv usage bndr of
                                Nothing  -> usage
                                Just occ -> extendVarEnv usage bndr (markMany occ)

occAnal env (Let bind body)
  = case occAnal new_env body            of { (body_usage, body') ->
    case occAnalBind env bind body_usage of { (final_usage, new_binds) ->
       (final_usage, mkLets new_binds body') }}
  where
    new_env = env `addNewCands` (bindersOf bind)

occAnalArgs env args
  = case mapAndUnzip (occAnal arg_env) args of  { (arg_uds_s, args') ->
    (foldr combineUsageDetails emptyDetails arg_uds_s, args')}
  where
    arg_env = vanillaCtxt env
\end{code}

Applications are dealt with specially because we want
the "build hack" to work.

\begin{code}
-- Hack for build, fold, runST
occAnalApp env (Var fun, args) is_rhs
  = case args_stuff of { (args_uds, args') ->
    let
        -- We mark the free vars of the argument of a constructor or PAP 
        -- as "many", if it is the RHS of a let(rec).
        -- This means that nothing gets inlined into a constructor argument
        -- position, which is what we want.  Typically those constructor
        -- arguments are just variables, or trivial expressions.
        --
        -- This is the *whole point* of the isRhsEnv predicate
        final_args_uds
                | isRhsEnv env,
                  isDataConId fun || valArgCount args < idArity fun
                = mapVarEnv markMany args_uds
                | otherwise = args_uds
    in
    (fun_uds `combineUsageDetails` final_args_uds, mkApps (Var fun) args') }
  where
    fun_uniq = idUnique fun

    fun_uds | isCandidate env fun = unitVarEnv fun oneOcc
            | otherwise           = emptyDetails

    args_stuff  | fun_uniq == buildIdKey    = appSpecial env 2 [True,True]  args
                | fun_uniq == augmentIdKey  = appSpecial env 2 [True,True]  args
                | fun_uniq == foldrIdKey    = appSpecial env 3 [False,True] args
                | fun_uniq == runSTRepIdKey = appSpecial env 2 [True]       args
                        -- (foldr k z xs) may call k many times, but it never
                        -- shares a partial application of k; hence [False,True]
                        -- This means we can optimise
                        --      foldr (\x -> let v = ...x... in \y -> ...v...) z xs
                        -- by floating in the v

                | otherwise = occAnalArgs env args


occAnalApp env (fun, args) is_rhs
  = case occAnal (addAppCtxt env args) fun of   { (fun_uds, fun') ->
        -- The addAppCtxt is a bit cunning.  One iteration of the simplifier
        -- often leaves behind beta redexs like
        --      (\x y -> e) a1 a2
        -- Here we would like to mark x,y as one-shot, and treat the whole
        -- thing much like a let.  We do this by pushing some True items
        -- onto the context stack.

    case occAnalArgs env args of        { (args_uds, args') ->
    let
        final_uds = fun_uds `combineUsageDetails` args_uds
    in
    (final_uds, mkApps fun' args') }}
    
appSpecial :: OccEnv 
           -> Int -> CtxtTy     -- Argument number, and context to use for it
           -> [CoreExpr]
           -> (UsageDetails, [CoreExpr])
appSpecial env n ctxt args
  = go n args
  where
    arg_env = vanillaCtxt env

    go n [] = (emptyDetails, [])        -- Too few args

    go 1 (arg:args)                     -- The magic arg
      = case occAnal (setCtxt arg_env ctxt) arg of      { (arg_uds, arg') ->
        case occAnalArgs env args of                    { (args_uds, args') ->
        (combineUsageDetails arg_uds args_uds, arg':args') }}
    
    go n (arg:args)
      = case occAnal arg_env arg of     { (arg_uds, arg') ->
        case go (n-1) args of           { (args_uds, args') ->
        (combineUsageDetails arg_uds args_uds, arg':args') }}
\end{code}

    
Case alternatives
~~~~~~~~~~~~~~~~~
If the case binder occurs at all, the other binders effectively do too.  
For example
        case e of x { (a,b) -> rhs }
is rather like
        let x = (a,b) in rhs
If e turns out to be (e1,e2) we indeed get something like
        let a = e1; b = e2; x = (a,b) in rhs

\begin{code}
occAnalAlt env case_bndr (con, bndrs, rhs)
  = case occAnal (env `addNewCands` bndrs) rhs of { (rhs_usage, rhs') ->
    let
        (final_usage, tagged_bndrs) = tagBinders rhs_usage bndrs
        final_bndrs | case_bndr `elemVarEnv` final_usage = bndrs
                    | otherwise                         = tagged_bndrs
                -- Leave the binders untagged if the case 
                -- binder occurs at all; see note above
    in
    (final_usage, (con, final_bndrs, rhs')) }
\end{code}


%************************************************************************
%*                                                                      *
\subsection[OccurAnal-types]{OccEnv}
%*                                                                      *
%************************************************************************

\begin{code}
data OccEnv
  = OccEnv IdSet        -- In-scope Ids; we gather info about these only
           OccEncl      -- Enclosing context information
           CtxtTy       -- Tells about linearity

-- OccEncl is used to control whether to inline into constructor arguments
-- For example:
--      x = (p,q)               -- Don't inline p or q
--      y = /\a -> (p a, q a)   -- Still don't inline p or q
--      z = f (p,q)             -- Do inline p,q; it may make a rule fire
-- So OccEncl tells enought about the context to know what to do when
-- we encounter a contructor application or PAP.

data OccEncl
  = OccRhs              -- RHS of let(rec), albeit perhaps inside a type lambda
                        -- Don't inline into constructor args here
  | OccVanilla          -- Argument of function, body of lambda, scruintee of case etc.
                        -- Do inline into constructor args here

type CtxtTy = [Bool]
        -- []           No info
        --
        -- True:ctxt    Analysing a function-valued expression that will be
        --                      applied just once
        --
        -- False:ctxt   Analysing a function-valued expression that may
        --                      be applied many times; but when it is, 
        --                      the CtxtTy inside applies

initOccEnv :: VarSet -> OccEnv
initOccEnv vars = OccEnv vars OccRhs []

isRhsEnv (OccEnv _ OccRhs     _) = True
isRhsEnv (OccEnv _ OccVanilla _) = False

isCandidate :: OccEnv -> Id -> Bool
isCandidate (OccEnv cands encl _) id = id `elemVarSet` cands 

addNewCands :: OccEnv -> [Id] -> OccEnv
addNewCands (OccEnv cands encl ctxt) ids
  = OccEnv (cands `unionVarSet` mkVarSet ids) encl ctxt

addNewCand :: OccEnv -> Id -> OccEnv
addNewCand (OccEnv cands encl ctxt) id
  = OccEnv (extendVarSet cands id) encl ctxt

setCtxt :: OccEnv -> CtxtTy -> OccEnv
setCtxt (OccEnv cands encl _) ctxt = OccEnv cands encl ctxt

oneShotGroup :: OccEnv -> [CoreBndr] -> (Bool, OccEnv, [CoreBndr])
        -- True <=> this is a one-shot linear lambda group
        -- The [CoreBndr] are the binders.

        -- The result binders have one-shot-ness set that they might not have had originally.
        -- This happens in (build (\cn -> e)).  Here the occurrence analyser
        -- linearity context knows that c,n are one-shot, and it records that fact in
        -- the binder. This is useful to guide subsequent float-in/float-out tranformations

oneShotGroup (OccEnv cands encl ctxt) bndrs 
  = case go ctxt bndrs [] of
        (new_ctxt, new_bndrs) -> (all is_one_shot new_bndrs, OccEnv cands encl new_ctxt, new_bndrs)
  where
    is_one_shot b = isId b && isOneShotLambda b

    go ctxt [] rev_bndrs = (ctxt, reverse rev_bndrs)

    go (lin_ctxt:ctxt) (bndr:bndrs) rev_bndrs
        | isId bndr = go ctxt bndrs (bndr':rev_bndrs)
        where
          bndr' | lin_ctxt  = setOneShotLambda bndr
                | otherwise = bndr

    go ctxt (bndr:bndrs) rev_bndrs = go ctxt bndrs (bndr:rev_bndrs)


vanillaCtxt (OccEnv cands _ _) = OccEnv cands OccVanilla []
rhsCtxt     (OccEnv cands _ _) = OccEnv cands OccRhs     []

addAppCtxt (OccEnv cands encl ctxt) args 
  = OccEnv cands encl (replicate (valArgCount args) True ++ ctxt)
\end{code}

%************************************************************************
%*                                                                      *
\subsection[OccurAnal-types]{OccEnv}
%*                                                                      *
%************************************************************************

\begin{code}
type UsageDetails = IdEnv OccInfo       -- A finite map from ids to their usage

combineUsageDetails, combineAltsUsageDetails
        :: UsageDetails -> UsageDetails -> UsageDetails

combineUsageDetails usage1 usage2
  = plusVarEnv_C addOccInfo usage1 usage2

combineAltsUsageDetails usage1 usage2
  = plusVarEnv_C orOccInfo usage1 usage2

addOneOcc :: UsageDetails -> Id -> OccInfo -> UsageDetails
addOneOcc usage id info
  = plusVarEnv_C addOccInfo usage (unitVarEnv id info)
        -- ToDo: make this more efficient

emptyDetails = (emptyVarEnv :: UsageDetails)

usedIn :: Id -> UsageDetails -> Bool
v `usedIn` details =  isExportedId v || v `elemVarEnv` details

tagBinders :: UsageDetails          -- Of scope
           -> [Id]                  -- Binders
           -> (UsageDetails,        -- Details with binders removed
              [IdWithOccInfo])    -- Tagged binders

tagBinders usage binders
 = let
     usage' = usage `delVarEnvList` binders
     uss    = map (setBinderOcc usage) binders
   in
   usage' `seq` (usage', uss)

tagBinder :: UsageDetails           -- Of scope
          -> Id                     -- Binders
          -> (UsageDetails,         -- Details with binders removed
              IdWithOccInfo)        -- Tagged binders

tagBinder usage binder
 = let
     usage'  = usage `delVarEnv` binder
     binder' = setBinderOcc usage binder
   in
   usage' `seq` (usage', binder')

setBinderOcc :: UsageDetails -> CoreBndr -> CoreBndr
setBinderOcc usage bndr
  | isTyVar bndr      = bndr
  | isExportedId bndr = case idOccInfo bndr of
                          NoOccInfo -> bndr
                          other     -> setIdOccInfo bndr NoOccInfo
            -- Don't use local usage info for visible-elsewhere things
            -- BUT *do* erase any IAmALoopBreaker annotation, because we're
            -- about to re-generate it and it shouldn't be "sticky"
                          
  | otherwise = setIdOccInfo bndr occ_info
  where
    occ_info = lookupVarEnv usage bndr `orElse` IAmDead
\end{code}


%************************************************************************
%*                                                                      *
\subsection{Operations over OccInfo}
%*                                                                      *
%************************************************************************

\begin{code}
oneOcc :: OccInfo
oneOcc = OneOcc False True

markMany, markInsideLam, markInsideSCC :: OccInfo -> OccInfo

markMany IAmDead = IAmDead
markMany other   = NoOccInfo

markInsideSCC occ = markMany occ

markInsideLam (OneOcc _ one_br) = OneOcc True one_br
markInsideLam occ               = occ

addOccInfo, orOccInfo :: OccInfo -> OccInfo -> OccInfo

addOccInfo IAmDead info2 = info2
addOccInfo info1 IAmDead = info1
addOccInfo info1 info2   = NoOccInfo

-- (orOccInfo orig new) is used
-- when combining occurrence info from branches of a case

orOccInfo IAmDead info2 = info2
orOccInfo info1 IAmDead = info1
orOccInfo (OneOcc in_lam1 one_branch1)
          (OneOcc in_lam2 one_branch2)
  = OneOcc (in_lam1 || in_lam2)
           False        -- False, because it occurs in both branches

orOccInfo info1 info2 = NoOccInfo
\end{code}