2 % (c) The GRASP/AQUA Project, Glasgow University, 1992-1997
5 This is the driver script for the Glasgow Haskell compilation system.
6 It is written in \tr{perl}. The first section includes a long
7 ``usage'' message that describes how the driver is supposed to work.
9 %************************************************************************
11 \section[Driver-usage]{Usage message}
13 %************************************************************************
16 ($Pgm = $0) =~ s|.*/||;
17 $ShortUsage = "\nUsage: For basic information, try the `-help' option.\n";
18 $LongUsage = "\n" . <<EOUSAGE;
19 Use of the Glorious Haskell Compilation System driver:
21 $Pgm [command-line-options-and-input-files]
23 ------------------------------------------------------------------------
24 This driver ($Pgm) guides each input file through (some of the)
25 possible phases of a compilation:
27 - unlit: extract code from a "literate program"
28 - hscpp: run code through the C pre-processor (if -cpp flag given)
29 - hsc: run the Haskell compiler proper
30 - gcc: run the C compiler (if compiling via C)
31 - as: run the assembler
34 For each input file, the phase to START with is determined by the
36 - .lhs literate Haskell: unlit
37 - .hs illiterate Haskell: hsc
38 - .hc C from the Haskell compiler: gcc
39 - .c C not from the Haskell compiler: gcc
40 - .s assembly language: as
41 - other passed directly to the linker: ld
43 If no files are given on the command line, input is taken from
44 standard input, and processing is as for an .hs file. (All output is
45 to stdout or stderr, however).
47 The phase at which to STOP processing is determined by a command-line
49 -C stop after generating C (.hc output)
50 -E stop after generating preprocessed C (.i output)
51 -S stop after generating assembler (.s output)
52 -c stop after generating object files (.o output)
54 Other commonly-used options are:
56 -O An `optimising' package of compiler flags, for faster code
58 -prof Compile for cost-centre profiling
59 (add -auto for automagic cost-centres on top-level functions)
61 -fglasgow-exts Allow Glasgow extensions (unboxed types, etc.)
63 -H14m Increase compiler's heap size
65 -M Output the Makefile rules recording the
66 dependencies of a list of Haskell files.
67 (ghc driver just calls upon the help of a
68 compatible mkdependHS script to do the
71 The User's Guide has more information about GHC's *many* options.
73 Given the above, here are some TYPICAL invocations of $Pgm:
75 # compile a Haskell module to a .o file, optimising:
77 # link three .o files into an executable called "test":
78 % $Pgm -o test Foo.o Bar.o Baz.o
79 # compile a Haskell module to C (a .hc file), using a bigger heap:
80 % $Pgm -C -H16m Foo.hs
81 # compile Haskell-produced C (.hc) to assembly language:
83 ------------------------------------------------------------------------
87 %************************************************************************
89 \section[Driver-init]{Initialisation}
91 %************************************************************************
93 The driver script need to be told where to find these executables, so
94 in the course of building the driver `executable', make-variables holding
95 these are prepended to the de-litted version of this file. The variables are:
100 HOSTPLATFORM TARGETPLATFORM
102 PROJECTNAME PROJECTVERSION PROJECTPATCHLEVEL
106 INSTLIBDIR_GHC INSTDATADIR_GHC
110 GHC_LIB_DIR GHC_RUNTIME_DIR GHC_UTILS_DIR GHC_INCLUDE_DIR
112 GHC_OPT_HILEV_ASM GhcWithNativeCodeGen
114 GHC_UNLIT GHC_HSCPP GHC_HSC GHC_SYSMAN
118 WAY_*_NAME WAY_*_HC_OPTS
124 Establish what executables to run for the various phases, what the
125 default options are for those phases, and other similar boring stuff.
128 select(STDERR); $| = 1; select(STDOUT); # no STDERR buffering, please.
130 $TargetPlatform = $TARGETPLATFORM;
132 #------------------------------------------------------------------------
133 # If you are adjusting paths by hand for a binary GHC distribution,
134 # de-commenting the line to set GLASGOW_HASKELL_ROOT should do.
135 # Or you can leave it as is, and set the environment variable externally.
136 #------------------------------------------------------------------------
137 # $ENV{'GLASGOW_HASKELL_ROOT'} = '/some/absolute/path/name';
139 if (! $ENV{'GLASGOW_HASKELL_ROOT'}) { # good -- death to environment variables
140 $TopPwd = ${TOP_PWD};
141 $InstLibDirGhc = ${INSTLIBDIR_GHC};
142 $InstDataDirGhc = ${INSTDATADIR_GHC};
144 $TopPwd = $ENV{'GLASGOW_HASKELL_ROOT'};
146 if (${INSTLIBDIR_GHC} =~ /.*(\/lib\/ghc\/\d\.\d\d\/[^-]+-[^-]+-[^-]+\/.*)/) {
147 $InstLibDirGhc = $ENV{'GLASGOW_HASKELL_ROOT'} . $1;
149 print STDERR "GLASGOW_HASKELL_ROOT environment variable is set;\nBut can't untangle $INSTLIBDIR_GHC.\n(Installation error)\n";
153 if (${INSTDATADIR_GHC} =~ /.*(\/lib\/ghc\/\d\.\d\d\/.*)/) {
154 $InstDataDirGhc = $ENV{'GLASGOW_HASKELL_ROOT'} . $2;
156 print STDERR "GLASGOW_HASKELL_ROOT environment variable is set;\nBut can't untangle $INSTDATADIR_GHC.\n(Installation error)\n";
162 $InstSysLibDir = $InstDataDirGhc;
163 $InstSysLibDir =~ s/\/ghc\//\/hslibs\//;
165 $InstSysLibDir = "$TopPwd/hslibs";
168 $Status = 0; # just used for exit() status
171 # set up signal handler
172 sub quit_upon_signal { &tidy_up_and_die(1, ''); }
173 $SIG{'INT'} = 'quit_upon_signal';
174 $SIG{'QUIT'} = 'quit_upon_signal';
176 # where to get "require"d .prl files at runtime (poor man's dynamic loading)
177 # (use LIB, not DATA, because we can't be sure of arch-independence)
178 @INC = ( ( $INSTALLING ) ? $InstLibDirGhc
179 : "$TopPwd/${CURRENT_DIR}" );
181 if ( $ENV{'TMPDIR'} ) { # where to make tmp file names
182 $Tmp_prefix = ($ENV{'TMPDIR'} . "/ghc$$");
184 print STDERR "TMPDIR has not been set to anything useful!\n" if (${TMPDIR} eq '');
185 $Tmp_prefix ="${TMPDIR}/ghc$$"; # TMPDIR set via Makefile when booting..
186 $ENV{'TMPDIR'} = ${TMPDIR}; # set the env var as well
189 @Files_to_tidy = (); # files we nuke in the case of abnormal termination
191 $Unlit = ( $INSTALLING ) ? "$InstLibDirGhc/unlit"
192 : "$TopPwd/${CURRENT_DIR}/${GHC_UNLIT}";
196 $Diff = $CONTEXT_DIFF;
201 $HsCpp = # but this is re-set to "cat" (after options) if -cpp not seen
202 ( $INSTALLING ) ? "$InstLibDirGhc/hscpp"
203 : "$TopPwd/${CURRENT_DIR}/${GHC_HSCPP}";
206 $genSPECS_flag = ''; # See ../utils/hscpp/hscpp.prl
207 $HsC = ( $INSTALLING ) ? "$InstLibDirGhc/hsc"
208 : "$TopPwd/${CURRENT_DIR}/${GHC_HSC}";
210 # For PVM fiends only
211 $SysMan = ( $INSTALLING ) ? "$InstLibDirGhc/SysMan"
212 : "$TopPwd/${CURRENT_DIR}/${GHC_SYSMAN}";
217 # HsC_rts_flags: if we want to talk to the LML runtime system
218 # NB: we don't use powers-of-2 sizes, because this may do
219 # terrible things to cache behavior.
221 $Specific_heap_size = 6 * 1000 * 1000;
222 $Specific_stk_size = 1000 * 1000;
223 $Scale_sizes_by = 1.0;
227 The variables set by @setupOptFlags@ represent parts of the
228 -O/-O2/etc ``templates,'' which are filled in later, using these.
229 These are the default values, which may be changed by user flags.
233 $Oopt_UnfoldingUseThreshold = '-fsimpl-uf-use-threshold3';
234 $Oopt_MaxSimplifierIterations = '-fmax-simplifier-iterations4';
235 $Oopt_PedanticBottoms = '-fpedantic-bottoms'; # ON by default
236 $Oopt_MonadEtaExpansion = '';
237 $Oopt_FinalStgProfilingMassage = '';
239 $Oopt_SpecialiseUnboxed = '';
240 $Oopt_DoSpecialise = ''; # ToDo:LATER: '-fspecialise';
241 $Oopt_FoldrBuild = 0; # *Off* by default!
242 $Oopt_FB_Support = ''; # was '-fdo-arity-expand';
243 # $Oopt_FoldrBuildWW = 0; # Off by default
244 $Oopt_FoldrBuildInline = ''; # was '-fdo-inline-foldr-build';
245 } # end of setupOptFlags
247 # Assign defaults to these right away.
251 Things to do with C compilers/etc:
253 $CcRegd = $GHC_OPT_HILEV_ASM;
254 @CcBoth_flags = ('-S'); # flags for *any* C compilation
258 # those for all files,
259 # those only for .c files;
260 # those only for .hc files
262 @CcRegd_flags = ('-ansi', '-D__STG_GCC_REGS__', '-D__STG_TAILJUMPS__');
263 @CcRegd_flags_c = ();
264 @CcRegd_flags_hc = ();
266 $As = ''; # "assembler" is normally GCC
269 $Lnkr = ''; # "linker" is normally GCC
272 # 'nm' is used for consistency checking (ToDo: mk-world-ify)
273 # ToDo: check the OS or something ("alpha" is surely not the crucial question)
274 $Nm = ($TargetPlatform =~ /^alpha-/) ? 'nm -B' : 'nm';
277 What options \tr{-user-setup-a} turn into (user-defined ``packages''
278 of options). Note that a particular user-setup implies a particular
279 Prelude ({\em including} its interface file(s)).
281 $BuildTag = ''; # default is sequential build w/ Appel-style GC
283 %BuildDescr = (# system ways begin
284 '', 'normal sequential',
288 '_mc', "$WAY_mc_NAME",
289 '_mr', "$WAY_mr_NAME",
290 '_mt', "$WAY_mt_NAME",
291 '_mp', "$WAY_mp_NAME",
292 '_mg', "$WAY_mg_NAME",
293 '_2s', "$WAY_2s_NAME",
294 '_1s', "$WAY_1s_NAME",
295 '_du', "$WAY_du_NAME",
313 '_B', "$WAY_B_NAME" );
315 # these are options that are "fed back" through the option processing loop
319 '_a', "$WAY_a_HC_OPTS",
320 '_b', "$WAY_b_HC_OPTS",
321 '_c', "$WAY_c_HC_OPTS",
322 '_d', "$WAY_d_HC_OPTS",
323 '_e', "$WAY_e_HC_OPTS",
324 '_f', "$WAY_f_HC_OPTS",
325 '_g', "$WAY_g_HC_OPTS",
326 '_h', "$WAY_h_HC_OPTS",
327 '_i', "$WAY_i_HC_OPTS",
328 '_j', "$WAY_j_HC_OPTS",
329 '_k', "$WAY_k_HC_OPTS",
330 '_l', "$WAY_l_HC_OPTS",
331 '_m', "$WAY_m_HC_OPTS",
332 '_n', "$WAY_n_HC_OPTS",
333 '_o', "$WAY_o_HC_OPTS",
334 '_A', "$WAY_A_HC_OPTS",
335 '_B', "$WAY_B_HC_OPTS",
338 '_p', "$WAY_p_HC_OPTS",
339 '_t', "$WAY_t_HC_OPTS",
340 '_u', "$WAY_u_HC_OPTS",
341 '_mc', "$WAY_mc_HC_OPTS",
342 '_mr', "$WAY_mr_HC_OPTS",
343 '_mt', "$WAY_mt_HC_OPTS",
344 '_mp', "$WAY_mp_HC_OPTS",
345 '_mg', "$WAY_mg_HC_OPTS",
346 '_2s', "$WAY_2s_HC_OPTS",
347 '_1s', "$WAY_1s_HC_OPTS",
348 '_du', "$WAY_B_HC_OPTS" );
350 # per-build code fragments which are eval'd
351 #%EvaldSetupOpts = ('', '', # this one must *not* be set!
353 # # profiled sequential
354 # '_p', 'push(@HsC_flags, \'-fscc-profiling\');
355 # push(@CcBoth_flags, \'-DPROFILING\');',
358 # #push(@CcBoth_flags, '-DPROFILING_DETAIL_COUNTS');
360 # # ticky-ticky sequential
361 # '_t', 'push(@HsC_flags, \'-fticky-ticky\');
362 # push(@CcBoth_flags, \'-DTICKY_TICKY\');',
364 ##OLD: # unregisterized (ToDo????)
368 # '_mc', '$StkChkByPageFaultOK = 0;
369 # push(@HsC_flags, \'-fconcurrent\');
370 # push(@HsCpp_flags,\'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\');
371 # push(@Cpp_define, \'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\');',
373 # # profiled concurrent
374 # '_mr', '$StkChkByPageFaultOK = 0;
375 # push(@HsC_flags, \'-fconcurrent\', \'-fscc-profiling\');
376 # push(@HsCpp_flags,\'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\');
377 # push(@Cpp_define, \'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\', \'-DPROFILING\');',
379 # # ticky-ticky concurrent
380 # '_mt', '$StkChkByPageFaultOK = 0;
381 # push(@HsC_flags, \'-fconcurrent\', \'-fticky-ticky\');
382 # push(@HsCpp_flags,\'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\');
383 # push(@Cpp_define, \'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\', \'-DTICKY_TICKY\');',
386 # '_mp', '$StkChkByPageFaultOK = 0;
387 # push(@HsC_flags, \'-fconcurrent\');
388 # push(@HsCpp_flags,\'-D__PARALLEL_HASKELL__\', \'-DPAR\');
389 # push(@Cpp_define, \'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\', \'-DPAR\');',
392 # '_mg', '$StkChkByPageFaultOK = 0;
393 # push(@HsC_flags, \'-fconcurrent\', \'-fgransim\');
394 # push(@HsCpp_flags,\'-D__GRANSIM__\', \'-DGRAN\');
395 # push(@Cpp_define, \'-D__CONCURRENT_HASKELL__\', \'-DCONCURRENT\', \'-DGRAN\');',
397 # '_2s', 'push (@CcBoth_flags, \'-DGC2s\');',
398 # '_1s', 'push (@CcBoth_flags, \'-DGC1s\');',
399 # '_du', 'push (@CcBoth_flags, \'-DGCdu\');',
401 # '_a', '', # these user-way guys should not be set!
421 Import/include directories (\tr{-I} options) are sufficiently weird to
422 require special handling.
425 @Import_dir = ('.'); #-i things
426 @Include_dir = ('.'); #-I things; other default(s) stuck on AFTER option processing
428 # where to look for interface files (system hi's, i.e., prelude and hslibs)
429 @SysImport_dir = ( $INSTALLING )
430 ? ( "$InstDataDirGhc/imports" )
431 : ( "$TopPwd/$CURRENT_DIR/$GHC_LIB_DIR/required"
432 , "$TopPwd/$CURRENT_DIR/$GHC_LIB_DIR/ghc"
433 , "$TopPwd/$CURRENT_DIR/$GHC_LIB_DIR/glaExts"
434 , "$TopPwd/$CURRENT_DIR/$GHC_LIB_DIR/concurrent" );
436 # We need to look in ghc/ and glaExts/ when searching for implicitly needed .hi files, but
437 # we should really *not* look there for explicitly imported modules.
439 $GhcVersionInfo = int ($PROJECTVERSION * 100);
440 $Haskell1Version = 4; # i.e., Haskell 1.4
443 @UserLibrary_dir= (); #-L things;...
444 @UserLibrary = (); #-l things asked for by the user
446 @SysLibrary_dir = ( ( $INSTALLING ) #-syslib things supplied by the system
448 : ( "$TopPwd/$CURRENT_DIR/$GHC_RUNTIME_DIR"
449 , "$TopPwd/$CURRENT_DIR/$GHC_RUNTIME_DIR/gmp"
450 , "$TopPwd/$CURRENT_DIR/$GHC_LIB_DIR"
451 , "$TopPwd/$CURRENT_DIR/$GHC_LIB_DIR/cbits"
454 @SysLibrary = (); # will be built up as we go along
456 $TopClosureFile # defaults to 1.2 one; will be mangled later
457 = ( $INSTALLING) ? "$InstLibDirGhc/TopClosureXXXX.o"
458 : "$TopPwd/$CURRENT_DIR/$GHC_RUNTIME_DIR/main/TopClosureXXXX.o";
460 # make depend for Haskell
462 = ( $INSTALLING ) ? "$InstLibDirGhc/mkdependHS"
463 : "$TopPwd/$CURRENT_DIR/$GHC_UTILS_DIR/mkdependHS/mkdependHS";
465 @MkDependHS_flags = ( );
467 # do_link flag should not be reset while rescanning the cmd-line.
469 $Specific_output_dir = ''; # set by -odir <dir>
470 $Specific_output_file = ''; # set by -o <file>; "-" for stdout
473 Function to initialise the per-compilation-unit globals that
474 are used to guide and control the invocation of the different phases.
477 sub initDriverGlobals {
479 # reset the following options:
480 # RTS flags to use while compiling
482 @HsP_flags = (); # these are the flags destined solely for
483 # the flex/yacc parser
488 The optimisations/etc to be done by the compiler are {\em normally}
489 expressed with a \tr{-O} (or \tr{-O2}) flag, or by its absence.
492 $OptLevel = 0; # no -O == 0; -O == 1; -O2 == 2; -Ofile == 3
493 $MinusO2ForC = 0; # set to 1 if -O2 should be given to C compiler
494 $StolenX86Regs = 4; # **HACK*** of the very worst sort
498 @CcBoth_flags = ('-S'); # flags for *any* C compilation
501 # GCC flags: those for all files, those only for .c files; those only for .hc files
502 @CcRegd_flags = ('-ansi', '-D__STG_GCC_REGS__', '-D__STG_TAILJUMPS__');
503 @CcRegd_flags_c = ();
504 @CcRegd_flags_hc = ();
506 @Import_dir = ('.'); #-i things
507 @Include_dir = ('.'); #-I things; other default(s) stuck on AFTER option processing
512 We are given a list of files with various presumably-known suffixes
513 (unknown-suffix files go straight to the linker). For each file, we
514 begin by assuming that we'll run every phase over it. However: (1)
515 global flags (\tr{-c}, \tr{-S}, etc.) tell us not to run any phase
516 past a certain point; and (2) the file's suffix tells us what phase to
517 start with. Linking is weird and kept track of separately.
519 Here are the initial defaults applied to all files:
521 $Cpp_flag_set = 0; # (hack)
522 $Only_preprocess_C = 0; # pretty hackish
523 $Only_generate_deps = 0; #
524 $PostprocessCcOutput = 0;
526 # native code-gen or via C?
527 $HaveNativeCodeGen = $GhcWithNativeCodeGen;
528 $HscOut = '-C='; # '-C=' ==> .hc output; '-S=' ==> .s output; '-N=' ==> neither
530 if $HaveNativeCodeGen && $TargetPlatform =~ /^(i386|alpha|sparc)-/;
531 $ProduceHi = '-hifile=';
535 $CollectingGCstats = 0;
536 $CollectGhcTimings = 0;
537 $DEBUGging = ''; # -DDEBUG and all that it entails (um... not really)
538 $PROFing = ''; # set to p or e if profiling
539 $PROFgroup = ''; # set to group if an explicit -Ggroup specified
540 $PROFauto = ''; # set to relevant hsc flag if -auto or -auto-all
541 $PROFcaf = ''; # set to relevant hsc flag if -caf-all
542 $PROFignore_scc = ''; # set to relevant parser flag if explicit sccs ignored
543 $UNPROFscc_auto = ''; # set to relevant hsc flag if forcing auto sccs without profiling
544 $TICKYing = ''; # set to t if compiling for ticky-ticky profiling
545 $PARing = ''; # set to p if compiling for PAR
546 $CONCURing = ''; # set to c if compiling for CONCURRENT
547 $GRANing = ''; # set to g if compiling for GRAN
548 $StkChkByPageFaultOK = 1; # may be set to 0 (false) for some builds
549 $Specific_hi_file = ''; # set by -ohi <file>; "-" for stdout
550 $Specific_dump_file = ''; # set by -odump <file>; "-" for stdout
551 $Using_dump_file = 0;
553 $Osuffix = ''; # default: use the normal suffix for that kind of output
555 $HiSuffix_prelude = '';
556 $Do_recomp_chkr = 0; # don't use the recompilatio checker unless asked
557 $Do_cc = -1; # a MAGIC indeterminate value; will be set to 1 or 0.
560 $Keep_hc_file_too = 0;
561 $Keep_s_file_too = 0;
562 $UseGhcInternals = 0; # if 1, may use GHC* modules
565 $Dump_parser_output = 0;
567 $Dump_asm_splitting_info = 0;
568 $NoImplicitPrelude = 0;
571 } # end of initDriverGlobals (Sigh)
573 # we split the argv passed to the driver into three:
578 # and files to be linked...
586 We inject consistency-checking information into \tr{.hc} files (both
587 when created by the Haskell compiler and when compiled by the C
588 compiler), so that we can check that an executable is made from
589 consistently-built pieces. (The check is normally done just after
590 linking.) The checking is done by introducing/munging
591 \tr{what(1)}-style strings. Anyway, here are the relevant global
592 variables and their defaults:
594 $LinkChk = 1; # set to 0 if the link check should *not* be done
596 # major & minor version numbers; major numbers must always agree;
597 # minor disagreements yield a warning.
598 $HsC_major_version = 31;
599 $HsC_minor_version = 0;
600 $Cc_major_version = 36;
601 $Cc_minor_version = 0;
603 # options: these must always agree
604 $HsC_consist_options = ''; # we record, in this order:
605 # Build tag; debugging?
606 $Cc_consist_options = ''; # we record, in this order:
607 # Build tag; debugging?
610 %************************************************************************
612 \section[Driver-parse-argv]{Munge the command-line options}
614 %************************************************************************
616 Now slurp through the arguments.
619 #---------- user defined prelude ---------------------------------------
621 if (grep(/^-user-prelude$/, @ARGV)) {
623 # If ARGV contains -user-prelude we are compiling a piece of
624 # prelude for the user, probably with additional specialise pragmas
626 # We strip out the -O -f and -user-prelude flags provided on
627 # the command line and add the ones used to compile the prelude
628 # ToDo: get these options from a common definition in mkworld
630 # We also enable any options forced through with -user-prelude-force
632 # Hey, Check out this grep statement ;-) (PS)
634 @ARGV = grep((!/^-O/ && !/^-f/ && !/^-user-prelude$/) || s/^-user-prelude-force//,
638 '-fcompiling-ghc-internals=???', # ToDo!!!!
640 '-fshow-pragma-name-errs',
641 '-fshow-import-specs',
647 print STDERR "ghc: -user-prelude options:\n", "@ARGV", "\n";
650 &initDriverGlobals();
651 &splitCmdLine(@ARGV);
652 # Run through the cmd-line first time.
653 &processArgs(@Cmd_opts);
655 # Check to see if driver is only in the business
656 # to generate dependencies
657 if ( $Status == 0 && $Only_generate_deps ) {
659 push (@MkDependHS_flags, "-o$Osuffix") if $Osuffix;
660 push (@MkDependHS_flags, "-s$BuildTag") if $BuildTag;
661 local($to_do) = "$MkDependHS @MkDependHS_flags -- @Cmd_opts -- @Input_file" ;
662 &run_something($to_do, 'Haskell dependencies');
666 # if there are several input files,
667 # we don't allow \tr{-o <file>} or \tr{-ohi <file>} options...
668 # (except if linking, of course)
670 if ($#Input_file > 0 && ( ! $Do_lnkr )) {
671 if ( ($Specific_output_file ne '' && $Specific_output_file ne '-')
672 || ($Specific_hi_file ne '' && $Specific_hi_file ne '-') ) {
673 print STDERR "$Pgm: You can't use -o or -ohi options if you have multiple input files.\n";
674 print STDERR "\tPerhaps the -odir option will do what you want.\n";
679 # check for various pathological -o and -odir combinations...
680 if ($Specific_output_dir ne '' && $Specific_output_file ne '') {
681 if ($Specific_output_file eq '-') {
682 print STDERR "$Pgm: can't set output directory with -ohi AND have output to stdout\n";
684 } else { # amalgamate...
685 $Specific_output_file = "$Specific_output_dir/$Specific_output_file";
686 # ToDo: check we haven't got a junk name now...
687 $Specific_output_dir = ''; # reset
691 # crash and burn if there were errors
693 print STDERR $ShortUsage;
698 %************************************************************************
700 \section[Driver-post-argv-mangling]{Setup after reading options}
702 %************************************************************************
704 %************************************************************************
706 \subsection{Set up for optimisation level (\tr{-O} or whatever)}
708 %************************************************************************
710 We come now to the default ``wads of options'' that are turned on by
711 \tr{-O0} (do min optimisation), \tr{-O} (ordinary optimisation),
712 \tr{-O2} (aggressive optimisation), or no O-ish flag (compile speed is
715 The user can also specify his/her own list of options in a file; in
716 that case, the work is already done (see stuff about @minusO3@,
719 GHC allows very precise control of what happens during a compilation.
720 Core-to-Core and STG-to-STG passes can be run in any order, as many
721 times as you like. Individual transformations can be turned on or
724 Sadly, however, there are some interdependencies \& Things You Must
725 Not Do. Here is the list.
729 \item[\tr{-fspecialise}:]
730 The specialiser must have dependency-analysed input; but if you run
731 the simplifier to do this, you must not let it toss away unused
732 bindings! (The typechecker conveys some specialisation info via
733 ``unused'' bindings...)
735 \item[\tr{-ffloat-inwards}:]
736 Floating inwards should be done before strictness analysis, because
737 the latter will give better results.
739 \item[\tr{-fstatic-args}:]
740 The static-arguments-transformation pass {\em must} have the
741 simplifier run right after it.
743 \item[\tr{-fcalc-inlinings[12]}:]
744 Not required, but there may be slight gains by re-simplifying after
745 this is done. (You could then \tr{-fcalc-inlinings} again, just for
748 \item[\tr{-ffull-laziness}:]
749 The (outwards-)let-floater should be the {\em last} Core-to-Core pass
750 that's run. (Um, well, howzabout the simplifier just once more...)
755 \item[\tr{-fupdate-analysis}:]
756 It really really wants to be the last STG-to-STG pass that is run.
761 sub setupOptimiseFlags {
767 # '-falways-float-lets-from-lets', # no idea why this was here (WDP 95/09)
768 '-ffloat-lets-exposing-whnf',
769 '-ffloat-primops-ok',
771 # '-fdo-lambda-eta-expansion', # too complicated
773 # '-flet-to-case', # no strictness analysis, so...
774 $Oopt_PedanticBottoms,
775 # $Oopt_MonadEtaExpansion, # no thanks
776 '-fsimpl-uf-use-threshold0',
777 '-fessential-unfoldings-only',
778 # $Oopt_UnfoldingUseThreshold, # no thanks
779 $Oopt_MaxSimplifierIterations,
782 # '-ffull-laziness', # removed 95/04 WDP following Andr\'e's lead
784 $Oopt_FinalStgProfilingMassage
787 @HsC_minusO_flags # NOTE: used for *both* -O and -O2 (some conditional bits)
789 '-fdo-eta-reduction',
791 # initial simplify: mk specialiser happy: minimum effort please
795 '-fkeep-spec-pragma-ids', # required before specialisation
796 '-fsimpl-uf-use-threshold0',
797 '-fessential-unfoldings-only',
798 '-fmax-simplifier-iterations1',
799 $Oopt_PedanticBottoms,
802 ($Oopt_DoSpecialise) ? (
803 '-fspecialise-overloaded',
804 $Oopt_SpecialiseUnboxed,
808 '-fsimplify', # need dependency anal after specialiser ...
809 '\(', # need tossing before calc-inlinings ...
811 '-ffloat-lets-exposing-whnf',
812 '-ffloat-primops-ok',
816 # '-fdo-eta-reduction',
817 '-fdo-lambda-eta-expansion',
819 $Oopt_PedanticBottoms,
820 $Oopt_MonadEtaExpansion,
821 $Oopt_UnfoldingUseThreshold,
822 $Oopt_MaxSimplifierIterations,
825 #LATER: '-fcalc-inlinings1', -- pointless for 2.01
827 # ($Oopt_FoldrBuildWW) ? (
828 # '-ffoldr-build-ww-anal',
829 # '-ffoldr-build-worker-wrapper',
833 # '-ffloat-lets-exposing-whnf',
834 # '-ffloat-primops-ok',
838 # '-fdo-eta-reduction',
839 # '-fdo-lambda-eta-expansion',
841 # $Oopt_PedanticBottoms,
842 # $Oopt_MonadEtaExpansion,
843 # $Oopt_UnfoldingUseThreshold,
844 # $Oopt_MaxSimplifierIterations,
848 # this pass-ordering sequence was agreed by Simon and Andr\'e
849 # (WDP 94/07, 94/11).
852 ($Oopt_FoldrBuild) ? (
853 '-ffoldr-build-on', # desugar list comprehensions for foldr/build
857 '-fignore-inline-pragma', # **** NB!
858 '-fdo-foldr-build', # NB
860 '-ffloat-lets-exposing-whnf',
861 '-ffloat-primops-ok',
865 # '-fdo-eta-reduction',
866 '-fdo-lambda-eta-expansion', # After full laziness
868 $Oopt_PedanticBottoms,
869 $Oopt_MonadEtaExpansion,
870 $Oopt_UnfoldingUseThreshold,
871 $Oopt_MaxSimplifierIterations,
880 '-ffloat-lets-exposing-whnf',
881 '-ffloat-primops-ok',
885 '-fdo-eta-reduction',
886 '-fdo-lambda-eta-expansion',
888 ($Oopt_FoldrBuildInline),
889 # you need to inline foldr and build
890 ($Oopt_FoldrBuild) ? ('-fdo-foldr-build') : (),
891 # but do reductions if you see them!
892 $Oopt_PedanticBottoms,
893 $Oopt_MonadEtaExpansion,
894 $Oopt_UnfoldingUseThreshold,
895 $Oopt_MaxSimplifierIterations,
903 '-ffloat-lets-exposing-whnf',
904 '-ffloat-primops-ok',
908 # '-fdo-eta-reduction',
909 '-fdo-lambda-eta-expansion',
911 '-flet-to-case', # Aha! Only done after strictness analysis
912 $Oopt_PedanticBottoms,
913 $Oopt_MonadEtaExpansion,
914 $Oopt_UnfoldingUseThreshold,
915 $Oopt_MaxSimplifierIterations,
920 # Case-liberation for -O2. This should be after
921 # strictness analysis and the simplification which follows it.
925 # : "-fliberate-case -fsimplify \\( $Oopt_FB_Support -ffloat-lets-exposing-whnf -ffloat-primops-ok -fcase-of-case -fdo-case-elim -fcase-merge -fdo-eta-reduction -fdo-lambda-eta-expansion -freuse-con -flet-to-case $Oopt_PedanticBottoms $Oopt_MonadEtaExpansion $Oopt_UnfoldingUseThreshold $Oopt_MaxSimplifierIterations \\)" ),
927 # Final clean-up simplification:
932 '-ffloat-lets-exposing-whnf',
933 '-ffloat-primops-ok',
937 # '-fdo-eta-reduction',
938 '-fdo-lambda-eta-expansion',
941 '-fignore-inline-pragma', # **** NB!
942 $Oopt_FoldrBuildInline,
943 ($Oopt_FoldrBuild) ? ('-fdo-foldr-build') : (),
944 # but still do reductions if you see them!
945 $Oopt_PedanticBottoms,
946 $Oopt_MonadEtaExpansion,
947 $Oopt_UnfoldingUseThreshold,
948 $Oopt_MaxSimplifierIterations,
953 #LATER: '-fcalc-inlinings2', -- pointless for 2.01
958 $Oopt_FinalStgProfilingMassage,
964 # SPECIAL FLAGS for -O2
972 Sort out what we're going to do about optimising. First, the @hsc@
973 flags and regular @cc@ flags to worry about:
975 if ( $OptLevel <= 0 ) {
977 # for this level, we tell the parser -fignore-interface-pragmas
978 push(@HsC_flags, '-fignore-interface-pragmas');
979 # and tell the compiler not to produce them
980 push(@HsC_flags, '-fomit-interface-pragmas');
982 &add_Hsc_flags( @HsC_minusNoO_flags );
983 push(@CcBoth_flags, ($MinusO2ForC) ? '-O2' : '-O'); # not optional!
985 } elsif ( $OptLevel == 1 || $OptLevel == 2 ) {
987 &add_Hsc_flags( @HsC_minusO_flags );
988 push(@CcBoth_flags, ($MinusO2ForC || $OptLevel == 2) ? '-O2' : '-O'); # not optional!
989 # -O? to GCC is not optional! -O2 probably isn't worth it generally,
990 # but it *is* useful in compiling the garbage collectors (so said
991 # Patrick many moons ago...).
993 } else { # -Ofile, then...
995 &add_Hsc_flags( @HsC_minusO3_flags );
996 push(@CcBoth_flags, ($MinusO2ForC) ? '-O2' : '-O'); # possibly to be elaborated...
999 } # setupOptimiseFlags
1003 %************************************************************************
1005 \subsection{Check for consistency, etc.}
1007 %************************************************************************
1009 Sort out @$BuildTag@, @$PROFing@, @$CONCURing@, @$PARing@,
1010 @$GRANing@, @$TICKYing@:
1012 sub setupBuildFlags {
1015 # PROFILING stuff after argv mangling:
1017 # warn about any scc exprs found (in case scc used as identifier)
1018 push(@HsP_flags, '-W');
1020 # add -auto sccs even if not profiling !
1021 push(@HsC_flags, $UNPROFscc_auto) if $UNPROFscc_auto;
1024 push(@HsC_flags, $PROFauto) if $PROFauto;
1025 push(@HsC_flags, $PROFcaf) if $PROFcaf;
1026 #push(@HsC_flags, $PROFdict) if $PROFdict;
1028 $Oopt_FinalStgProfilingMassage = '-fmassage-stg-for-profiling';
1030 push(@HsP_flags, (($PROFignore_scc) ? $PROFignore_scc : '-S'));
1032 if ( $SplitObjFiles ) {
1033 # can't split with cost centres -- would need global and externs
1034 print STDERR "$Pgm: WARNING: splitting objects when profiling will *BREAK* if any _scc_s are present!\n";
1035 # (but it's fine if there aren't any _scc_s around...)
1036 # $SplitObjFiles = 0; # unset
1037 #not an error: for now: $Status++;
1040 #if ( $BuildTag ne '' ) {
1041 # local($b) = $BuildDescr{$BuildTag};
1042 # if ($CONCURing eq 'c') { print STDERR "$Pgm: Can't mix $b with -concurrent.\n"; exit 1; }
1043 # if ($PARing eq 'p') { print STDERR "$Pgm: Can't mix $b with -parallel.\n"; exit 1; }
1044 # if ($GRANing eq 'g') { print STDERR "$Pgm: Can't mix $b with -gransim.\n"; exit 1; }
1045 # if ($TICKYing eq 't') { print STDERR "$Pgm: Can't mix $b with -ticky.\n"; exit 1; }
1047 # # ok to have a user-way profiling build
1048 # # eval the profiling opts ... but leave user-way BuildTag
1049 # if ($PROFing eq 'p') { &processArgs(split(' ', $SetupOpts{'_p'})); } # eval($EvaldSetupOpts{'_p'}); }
1051 if ( $PROFing eq 'p' ) {
1052 if ($PARing eq 'p') { print STDERR "$Pgm: Can't do profiling with -parallel.\n"; exit 1; }
1053 if ($GRANing eq 'g') { print STDERR "$Pgm: Can't do profiling with -gransim.\n"; exit 1; }
1054 if ($TICKYing eq 't') { print STDERR "$Pgm: Can't do profiling with -ticky.\n"; exit 1; }
1055 $BuildTag = ($CONCURing eq 'c') ? '_mr' : '_p' ; # possibly "profiled concurrent"...
1057 } elsif ( $CONCURing eq 'c' ) {
1058 if ($PARing eq 'p') { print STDERR "$Pgm: Can't mix -concurrent with -parallel.\n"; exit 1; }
1059 if ($GRANing eq 'g') { print STDERR "$Pgm: Can't mix -concurrent with -gransim.\n"; exit 1; }
1060 $BuildTag = ($TICKYing eq 't') ? '_mt' : '_mc' ; # possibly "ticky concurrent"...
1061 # "profiled concurrent" already acct'd for...
1063 } elsif ( $PARing eq 'p' ) {
1064 if ($GRANing eq 'g') { print STDERR "$Pgm: Can't mix -parallel with -gransim.\n"; exit 1; }
1065 if ($TICKYing eq 't') { print STDERR "$Pgm: Can't mix -parallel with -ticky.\n"; exit 1; }
1068 if ( $Do_lnkr && ( ! $ENV{'PVM_ROOT'} || ! $ENV{'PVM_ARCH'} )) {
1069 print STDERR "$Pgm: both your PVM_ROOT and PVM_ARCH environment variables must be set for linking under -parallel.\n";
1073 } elsif ( $GRANing eq 'g' ) {
1074 if ($TICKYing eq 't') { print STDERR "$Pgm: Can't mix -gransim with -ticky.\n"; exit 1; }
1077 } elsif ( $TICKYing eq 't' ) {
1083 After the sanity checks, add flags to the necessary parts of the driver pipeline:
1086 if ( $BuildTag ne '' ) { # something other than normal sequential...
1088 local($Tag) = "${BuildTag}";
1089 $Tag =~ s/_//; # move the underscore to the back
1091 $HscOut = '-C='; # must go via C
1092 &processArgs(split(' ', $SetupOpts{$BuildTag}));
1093 # eval($EvaldSetupOpts{$BuildTag});
1097 Decide what the consistency-checking options are in force for this run:
1100 $HsC_consist_options = "${BuildTag},${DEBUGging}";
1101 $Cc_consist_options = "${BuildTag},${DEBUGging}";
1104 # Funny place to put it, but why not.
1106 if ( $HiSuffix_prelude eq '' ) {
1107 local($Tag) = "${BuildTag}";
1109 $Tag = "${Tag}_" if $Tag ne '';
1110 $HiSuffix_prelude="${Tag}hi";
1112 push(@HsC_flags, "-hisuf-prelude=.${HiSuffix_prelude}"); # use appropriate Prelude .hi files
1113 push(@HsC_flags, "-hisuf=.${HiSuffix}");
1118 %************************************************************************
1120 \subsection{Add on machine-specific C-compiler flags}
1122 %************************************************************************
1124 Shove on magical machine-specific options. We use \tr{unshift} to
1125 stick them on the {\em front} of the arrays, so that ``later''
1126 user-specified flags can clobber them (e.g., \tr{-U__STG_REV_TBLS__}).
1128 Note: a few ``always apply'' flags were set at the very beginning.
1133 if ($TargetPlatform =~ /^alpha-/) {
1134 # we know how to *mangle* asm for alpha
1135 unshift(@CcRegd_flags, ('-D__STG_REV_TBLS__'));
1136 unshift(@CcRegd_flags, ('-DSTACK_CHECK_BY_PAGE_FAULT=1')) if $StkChkByPageFaultOK;
1137 unshift(@CcBoth_flags, ('-static'));
1139 } elsif ($TargetPlatform =~ /^hppa/) {
1140 # we know how to *mangle* asm for hppa
1141 unshift(@CcRegd_flags, ('-D__STG_REV_TBLS__'));
1142 unshift(@CcBoth_flags, ('-static'));
1144 # We don't put in '-mlong-calls', because it's only
1145 # needed for very big modules (sigh), and we don't want
1146 # to hobble ourselves further on all the other modules
1149 # [Dated comment (gcc-2.6.x?), -mlong-calls is no longer
1150 # a supported gcc HPPA flag]
1151 unshift(@CcBoth_flags, ('-D_HPUX_SOURCE'));
1152 # ___HPUX_SOURCE, not _HPUX_SOURCE, is #defined if -ansi!
1153 # (very nice, but too bad the HP /usr/include files don't agree.)
1155 } elsif ($TargetPlatform =~ /^i386-/) {
1156 # we know how to *mangle* asm for X86
1157 unshift(@CcRegd_flags, ('-D__STG_REV_TBLS__'));
1158 unshift(@CcRegd_flags, ('-DSTACK_CHECK_BY_PAGE_FAULT=1')) if $StkChkByPageFaultOK;
1160 # -fno-defer-pop : basically the same game as for m68k
1162 # -fomit-frame-pointer : *must* ; because we're stealing
1163 # the fp (%ebp) for our register maps. *All* register
1164 # maps (in MachRegs.lh) must steal it.
1166 unshift(@CcRegd_flags_hc, '-fno-defer-pop');
1167 unshift(@CcRegd_flags, '-fomit-frame-pointer');
1168 unshift(@CcRegd_flags, "-DSTOLEN_X86_REGS=$StolenX86Regs");
1170 } elsif ($TargetPlatform =~ /^m68k-/) {
1171 # we know how to *mangle* asm for m68k
1172 unshift (@CcRegd_flags, ('-D__STG_REV_TBLS__'));
1173 unshift (@CcRegd_flags, ('-DSTACK_CHECK_BY_PAGE_FAULT=1')) if $StkChkByPageFaultOK;
1175 # -fno-defer-pop : for the .hc files, we want all the pushing/
1176 # popping of args to routines to be explicit; if we let things
1177 # be deferred 'til after an STGJUMP, imminent death is certain!
1179 # -fomit-frame-pointer : *don't*
1180 # It's better to have a6 completely tied up being a frame pointer
1181 # rather than let GCC pick random things to do with it.
1182 # (If we want to steal a6, then we would try to do things
1183 # as on iX86, where we *do* steal the frame pointer [%ebp].)
1185 unshift(@CcRegd_flags_hc, '-fno-defer-pop');
1186 unshift(@CcRegd_flags, '-fno-omit-frame-pointer');
1187 # maybe gives reg alloc a better time
1188 # also: -fno-defer-pop is not sufficiently well-behaved without it
1190 } elsif ($TargetPlatform =~ /^mips-/) {
1191 # we (hope to) know how to *mangle* asm for MIPSen
1192 unshift(@CcRegd_flags, ('-D__STG_REV_TBLS__'));
1193 unshift(@CcRegd_flags, ('-DSTACK_CHECK_BY_PAGE_FAULT=1')) if $StkChkByPageFaultOK;
1194 unshift(@CcBoth_flags, ('-static'));
1196 } elsif ($TargetPlatform =~ /^powerpc-/) {
1197 # we know how to *mangle* asm for PowerPC
1198 unshift(@CcRegd_flags, ('-D__STG_REV_TBLS__'));
1199 unshift(@CcRegd_flags, ('-DSTACK_CHECK_BY_PAGE_FAULT=1')) if $StkChkByPageFaultOK;
1200 unshift(@CcBoth_flags, ('-static')); # always easier to start with
1201 unshift(@CcRegd_flags, ('-finhibit-size-directive')); # avoids traceback tables
1203 } elsif ($TargetPlatform =~ /^sparc-/) {
1204 # we know how to *mangle* asm for SPARC
1205 unshift(@CcRegd_flags, ('-D__STG_REV_TBLS__'));
1206 unshift(@CcRegd_flags, ('-DSTACK_CHECK_BY_PAGE_FAULT=1')) if $StkChkByPageFaultOK;
1209 } # end of setupMachOpts
1212 Same unshifting magic, but for special linker flags.
1214 The configure script determines whether the object file symbol tables
1215 have a leading underscore, and sets @LeadingUnderscore@ accordingly.
1216 (The driver script `sees' the setting of the @LeadingUnderscore@
1217 by having the Makefile prepend it).
1221 local($uscore) = ( ${LeadingUnderscore} eq 'YES' ) ? '_' : '';
1225 '-u', "${uscore}Main_" . $Ld_main . '_closure',
1227 # What are these? -- SOF
1228 # , '-u', "${uscore}STbase_unsafePerformPrimIO_fast1"
1229 # , '-u', "${uscore}Prelude_Z91Z93_closure" # i.e., []
1230 # , '-u', "${uscore}Prelude_IZh_static_info"
1231 # , '-u', "${uscore}Prelude_False_inregs_info"
1232 # , '-u', "${uscore}Prelude_True_inregs_info"
1233 # , '-u', "${uscore}Prelude_CZh_static_info"
1234 # , '-u', "${uscore}DEBUG_REGS"
1236 ; # just for fun, now...
1238 } # end of setupLinkOpts
1242 %************************************************************************
1244 \subsection{Set up include paths and system-library enslurpment}
1246 %************************************************************************
1248 Now that we know what garbage-collector, etc., are required, we can
1249 finalise our list of libraries to slurp through, and generally Get
1254 # default includes must be added AFTER option processing
1255 if ( ! $INSTALLING ) {
1256 push (@Include_dir, "$TopPwd/${CURRENT_DIR}/${GHC_INCLUDE_DIR}");
1258 push (@Include_dir, "$InstLibDirGhc/includes");
1259 push (@Include_dir, "$InstDataDirGhc/includes");
1261 } # end of setupIncPaths
1266 push(@SysLibrary, ( '-lHS', '-lHS_cbits' )); # basic I/O and prelude stuff
1269 foreach $f (@SysLibrary) {
1270 next if $f =~ /_cbits/;
1271 $f .= $BuildTag if $f =~ /^-lHS/;
1274 # fiddle the TopClosure file name...
1275 $TopClosureFile =~ s/XXXX//;
1277 # Push library HSrts, plus boring clib bit
1278 push(@SysLibrary, "-lHSrts${BuildTag}");
1279 push(@SysLibrary, '-lHSclib');
1281 # RTS compiled with cygwin32, uses the WinMM API
1282 # to implement the itimers, since cygwin.dll does not
1283 # support it. Only reqd. for `ways' that use itimers.
1285 push(@SysLibrary, '-lwinmm') if $BuildTag ne '' && $TargetPlatform eq 'i386-unknown-cygwin32';
1287 # Push the pvm libraries
1288 if ($BuildTag eq '_mp') {
1289 $pvmlib = "$ENV{'PVM_ROOT'}/lib/$ENV{'PVM_ARCH'}";
1290 push(@SysLibrary, "-L$pvmlib", '-lpvm3', '-lgpvm3');
1291 if ( $ENV{'PVM_ARCH'} eq 'SUNMP' ) {
1292 push(@SysLibrary, '-lthread', '-lsocket', '-lnsl');
1293 } elsif ( $ENV{'PVM_ARCH'} eq 'SUN4SOL2' ) {
1294 push(@SysLibrary, '-lsocket', '-lnsl');
1298 # Push the GNU multi-precision arith lib; and the math library
1299 push(@SysLibrary, '-lgmp');
1300 push(@SysLibrary, '-lm');
1303 %************************************************************************
1305 \subsection{Check that this system was built to do what we are asking}
1307 %************************************************************************
1309 Before continuing we check that the appropriate build is available.
1312 #die "$Pgm: no BuildAvail?? $BuildTag\n" if $BuildDescr{$BuildTag} eq '' ; # sanity
1314 if ( $BuildDescr{$BuildTag} eq '' ) {
1315 print STDERR "$Pgm: a `", $BuildDescr{$BuildTag},
1316 "' \"build\" is not available with your GHC setup.\n";
1317 print STDERR "(It was not configured for it at your site.)\n";
1318 print STDERR $ShortUsage;
1322 } # end of setupSyslibs
1326 %************************************************************************
1328 \subsection{Final miscellaneous setup bits before we start going}
1330 %************************************************************************
1332 Record largest specific heapsize, if any.
1334 sub setupHeapStackSize {
1335 $Specific_heap_size = $Specific_heap_size * $Scale_sizes_by;
1336 push(@HsC_rts_flags, '-H'.$Specific_heap_size);
1337 $Specific_stk_size = $Specific_stk_size * $Scale_sizes_by;
1338 push(@HsC_rts_flags, "-K$Specific_stk_size");
1342 If no input or link files seen, then we let 'em feed in stdin; this is
1343 mainly for debugging.
1347 if ($#Input_file < 0 && $#Link_file < 0) {
1348 @Input_file = ( '-' );
1350 open(INF, "> $Tmp_prefix.hs") || &tidy_up_and_die(1,"Can't open $Tmp_prefix.hs\n");
1351 print STDERR "Enter your Haskell program, end with ^D (on a line of its own):\n";
1352 while (<>) { print INF $_; }
1353 close(INF) || &tidy_up_and_die(1,"Failed writing to $Tmp_prefix.hs\n");
1358 Tell the world who we are, if they asked.
1360 print STDERR "${PROJECTNAME}, version ${PROJECTVERSION} ${PROJECTPATCHLEVEL}\n"
1364 %************************************************************************
1366 \section[Driver-main-loop]{Main loop: Process input files, and link if required}
1368 %************************************************************************
1370 Process the input files; don't continue with linking if there are
1371 problems (global variable @$Status@ non-zero).
1373 foreach $ifile (@Input_file) {
1374 &ProcessInputFile($ifile);
1377 if ( $Status > 0 ) { # don't link if there were errors...
1378 print STDERR $ShortUsage;
1383 # append last minute flags linker and consistency flags
1390 Link if appropriate.
1393 local($libdirs) = '';
1395 # glue them together:
1396 push(@UserLibrary_dir, @SysLibrary_dir);
1398 $libdirs = '-L' . join(' -L',@UserLibrary_dir) if $#UserLibrary_dir >= 0;
1400 # for a linker, use an explicitly given one, or the going C compiler ...
1401 local($lnkr) = ( $Lnkr ) ? $Lnkr : $CcRegd;
1403 local($output) = ($Specific_output_file ne '') ? "-o $Specific_output_file" : '';
1404 @Files_to_tidy = ($Specific_output_file ne '') ? $Specific_output_file : 'a.out';
1406 local($to_do) = "$lnkr $Verbose @Ld_flags $output @Link_file $TopClosureFile $libdirs @UserLibrary @SysLibrary";
1407 &run_something($to_do, 'Linker');
1409 # finally, check the consistency info in the binary
1410 local($executable) = $Files_to_tidy[0];
1411 @Files_to_tidy = (); # reset; we don't want to nuke it if it's inconsistent
1414 # dynamically load consistency-chking code; then do it.
1415 require('ghc-consist.prl')
1416 || &tidy_up_and_die(1,"$Pgm: panic: can't load ghc-consist.prl!\n");
1418 &chk_consistency_info ( $executable );
1421 # if PVM parallel stuff, we do truly weird things.
1422 # Essentially: (1) move the executable over to where PVM expects
1423 # to find it. (2) create a script in place of the executable
1424 # which will cause the program to be run, via SysMan.
1425 if ( $PARing eq 'p' ) {
1426 local($pvm_executable) = $executable;
1427 local($pvm_executable_base);
1429 if ( $pvm_executable !~ /^\// ) { # a relative path name: make absolute
1430 local($pwd) = `pwd`;
1432 $pwd =~ s/^\/tmp_mnt//;
1433 $pvm_executable = "$pwd/$pvm_executable";
1436 $pvm_executable =~ s|/|=|g; # make /s into =s
1437 $pvm_executable_base = $pvm_executable;
1439 $pvm_executable = $ENV{'PVM_ROOT'} . '/bin/' . $ENV{'PVM_ARCH'}
1440 . "/$pvm_executable";
1442 &run_something("$Rm -f $pvm_executable; $Cp -p $executable $pvm_executable && $Rm -f $executable", 'Moving binary to PVM land');
1444 # OK, now create the magic script for "$executable"
1445 open(EXEC, "> $executable") || &tidy_up_and_die(1,"$Pgm: couldn't open $executable to write!\n");
1446 print EXEC <<EOSCRIPT1;
1447 eval 'exec perl -S \$0 \${1+"\$@"}'
1448 if \$running_under_some_shell;
1449 # =!=!=!=!=!=!=!=!=!=!=!
1450 # This script is automatically generated: DO NOT EDIT!!!
1451 # Generated by Glasgow Haskell, version ${PROJECTVERSION} ${PROJECTPATCHLEVEL}
1453 \$pvm_executable = '$pvm_executable';
1454 \$pvm_executable_base = '$pvm_executable_base';
1455 \$SysMan = '$SysMan';
1458 print EXEC <<\EOSCRIPT2;
1459 # first, some magical shortcuts to run "commands" on the binary
1461 if ($#ARGV == 1 && $ARGV[0] eq '+RTS' && $ARGV[1] =~ /^--((size|file|strip|rm|nm).*)/ ) {
1463 system("$cmd $pvm_executable");
1467 # OK, really run it; process the args first
1468 $ENV{'PE'} = $pvm_executable_base;
1470 $nprocessors = 2; # the default
1474 # ToDo: handle --RTS
1475 args: while ($a = shift(@ARGV)) {
1476 if ( $a eq '+RTS' ) {
1478 } elsif ( $a eq '-RTS' ) {
1481 if ( $a eq '-d' && $in_RTS_args ) {
1483 } elsif ( $a =~ /^-N(\d+)/ && $in_RTS_args ) {
1486 push(@nonPVM_args, $a);
1490 local($return_val) = 0;
1491 system("$SysMan $debug $pvm_executable $nprocessors @nonPVM_args");
1493 system("mv $ENV{'HOME'}/$pvm_executable_base.???.gr .") if -f "$ENV{'HOME'}/$pvm_executable_base.001.gr";
1496 close(EXEC) || die "Failed closing $executable\n";
1497 chmod 0755, $executable;
1501 # that... that's all, folks!
1503 exit $Status; # will still be 0 if all went well
1506 %************************************************************************
1508 \section[Driver-do-one-file]{How to process a single input file}
1510 %************************************************************************
1513 sub ProcessInputFile {
1514 local($ifile) = @_; # input file name
1515 local($ifile_root); # root of or basename of input file
1516 local($ofile_target); # ultimate output file we hope to produce
1517 # from input file (need to know for recomp
1518 # checking purposes)
1519 local($hifile_target);# ditto (but .hi file)
1522 Handle the weirdity of input from stdin.
1524 if ($ifile ne '-') {
1525 ($ifile_root = $ifile) =~ s/\.[^\.\/]+$//;
1526 $ofile_target = # may be reset later...
1527 ($Specific_output_file ne '' && ! $Do_lnkr)
1528 ? $Specific_output_file
1529 : &odir_ify($ifile_root, 'o');
1530 $hifile_target= ($Specific_hi_file ne '')
1532 : "$ifile_root.$HiSuffix"; # ToDo: odirify?
1533 # NB: may change if $ifile_root isn't module name (??)
1535 $ifile = "$Tmp_prefix.hs"; # we know that's where we put the input
1536 $ifile_root = '_stdin';
1537 $ofile_target = '_stdout'; # gratuitous?
1538 $hifile_target= '_stdout'; # ditto?
1542 We need to decide what phases of the compilation system we will run
1543 over this file. The defaults are the ones established when processing
1544 flags. (That established what the last phase run for all files is.)
1546 We do the pre-recompilation-checker phases here; the rest later.
1550 Look at the suffix and decide what initial phases of compilation may
1551 be dropped off for this file. Also the rather boring business of
1552 which files are coming-in/going-out.
1554 Again, we'll do the post-recompilation-checker parts of this later.
1556 local($do_lit2pgm) = ($ifile =~ /\.lhs$/) ? 1 : 0;
1557 local($do_hscpp) = 1; # but "hscpp" might really be "cat"
1560 # names of the files to stuff between phases
1561 # defaults are temporaries
1562 local($in_lit2pgm) = $ifile;
1563 local($lit2pgm_hscpp) = "$Tmp_prefix.lpp";
1564 local($hscpp_hsc) = "$Tmp_prefix.cpp";
1565 local($hsc_hi) = "$Tmp_prefix.hi";
1566 local($cc_as_o) = "${Tmp_prefix}_o.s"; # temporary for raw .s file if opt C
1567 local($cc_as) = "$Tmp_prefix.s"; # mangled or hsc-produced .s code
1568 local($as_out) = $ofile_target;
1570 local($is_hc_file) = 1; #Is the C code .hc or .c? Assume .hc for now
1572 $lit2pgm_hscpp = $ifile if ($ifile =~ /\.hs$/);
1574 # OK, let's strip off some literate junk:
1575 &runLit2pgm($in_lit2pgm, $lit2pgm_hscpp) if ($ifile =~ /\.lhs$/);
1579 # Scan the top of the de-litted file for {-# OPTIONS #-} pragmas
1580 &check_for_source_options($lit2pgm_hscpp);
1581 # options found in the source file take a back seat, i.e., we scan
1582 # them first. Only process the command line again if source file
1583 # contained anything of interest *or* there's more than one
1584 # input file (we have to reset the options).
1586 if ( $#Input_file >= 0 || $#File_options >= 0) {
1587 @File_options = (@File_options, @Cmd_opts);
1589 # Now process the command line
1590 &initDriverGlobals();
1591 &processArgs(@File_options);
1594 # Having got the effective command line scanned, set up
1595 # the various options in prep for some real work.
1597 # check the sanity of the BuildTag we're about to use,
1598 # and if needs be, add some more flags and setup to
1599 # the different phases.
1602 &setupOptimiseFlags();
1605 &setupHeapStackSize();
1608 # These two variables need to be set after the
1609 # command-line has been processed and the build options
1610 # have be seen set up. This is because command-line options
1611 # can control whether to compile vias C or not.
1613 local($do_cc) = ( $Do_cc != -1) # i.e., it was set explicitly
1615 : ( ($HscOut eq '-C=') ? 1 : 0 );
1616 local($do_as) = $Do_as;
1617 local($hsc_out) = ( $HscOut eq '-C=' ) ? "$Tmp_prefix.hc" : "$Tmp_prefix.s" ;
1619 if ($ifile =~ /.lhs$/ || $ifile =~ /.hs$/ ) {
1621 } elsif ($ifile =~ /\.hc$/ || $ifile =~ /_hc$/ ) { # || $ifile =~ /\.$Isuffix$/o) # ToDo: better
1622 $do_hscpp = 0; $do_hsc = 0; $do_cc = 1;
1624 } elsif ($ifile =~ /\.c$/) {
1625 $do_hscpp = 0; $do_hsc = 0; $do_cc = 1;
1626 $hsc_out = $ifile; $is_hc_file = 0;
1627 } elsif ($ifile =~ /\.s$/) {
1628 $do_hscpp = 0; $do_hsc = 0; $do_cc = 0;
1630 } else { # don't know what it is, but nothing to do herein...
1631 $do_hscpp = 0; $do_hsc = 0; $do_cc = 0; $do_as = 0;
1634 # hack to avoid running hscpp
1635 $HsCpp = $Cat if ! $Cpp_flag_set;
1637 &runHscpp($in_lit2pgm, $lit2pgm_hscpp, $hscpp_hsc)
1641 We now think about whether to run hsc/cc or not (when hsc produces .s
1642 stuff, it effectively takes the place of both phases).
1644 To get the output file name right: for each phase that we are {\em
1645 not} going to run, set its input (i.e., the output of its preceding
1646 phase) to @"$ifile_root.<suffix>"@.
1648 local($going_interactive) = $HscOut eq '-N=' || $ifile_root eq '_stdin';
1651 # Warning issued if -keep-hc-file-too is used without
1652 # -fvia-C (or the equivalent)
1654 if ( $HscOut ne '-C=' && $Keep_hc_file_too ) {
1655 print STDERR "Warning: Native code generator to be used, -keep-hc-file-too will be ignored\n";
1658 if (! $do_cc && ! $do_as) { # stopping after hsc
1659 $hsc_out = ($Specific_output_file ne '')
1660 ? $Specific_output_file
1661 : &odir_ify($ifile_root, ($HscOut eq '-C=') ? 'hc' : 's');
1663 $ofile_target = $hsc_out; # reset
1666 if (! $do_as) { # stopping after gcc (or hsc)
1667 $cc_as = ($Specific_output_file ne '')
1668 ? $Specific_output_file
1669 : &odir_ify($ifile_root, ( $Only_preprocess_C ) ? 'i' : 's');
1671 $ofile_target = $cc_as; # reset
1677 Now the Haskell compiler, C compiler, and assembler
1681 &runHscAndProcessInterfaces( $ifile, $hscpp_hsc, $ifile_root,
1682 $ofile_target, $hifile_target);
1686 &runGcc ($is_hc_file, $hsc_out, $cc_as_o);
1687 &runMangler($is_hc_file, $cc_as_o, $cc_as, $ifile_root);
1690 &split_asm_file($cc_as) if $do_as && $SplitObjFiles;
1692 &runAs($as_out, $ifile_root) if $do_as;
1695 Finally, decide what to queue up for linker input.
1697 # tentatively assume we will eventually produce linker input:
1698 push(@Link_file, &odir_ify($ifile_root, 'o'));
1700 #ToDo: local($or_isuf) = ($Isuffix eq '') ? '' : "|$Isuffix";
1702 if ( $ifile !~ /\.(lhs|hs|hc|c|s)$/ && $ifile !~ /_hc$/ ) {
1703 print STDERR "$Pgm: don't recognise suffix on `$ifile'; passing it through to linker\n"
1704 if $ifile !~ /\.a$/;
1706 # oops; we tentatively pushed the wrong thing; fix & do the right thing
1707 pop(@Link_file); push(@Link_file, $ifile);
1711 } # end of ProcessInputFile
1714 %************************************************************************
1716 \section[Driver-run-phases]{Routines to run the various phases}
1718 %************************************************************************
1722 local($in_lit2pgm, $lit2pgm_hscpp) = @_;
1724 local($to_do) = "echo '#line 1 \"$in_lit2pgm\"' > $lit2pgm_hscpp && ".
1725 "$Unlit @Unlit_flags $in_lit2pgm - >> $lit2pgm_hscpp";
1726 @Files_to_tidy = ( $lit2pgm_hscpp );
1728 &run_something($to_do, 'literate pre-processor');
1734 local($in_lit2pgm, $lit2pgm_hscpp, $hscpp_hsc) = @_;
1738 if ($HsCpp eq $Cat) {
1739 $to_do = "echo '#line 1 \"$in_lit2pgm\"' > $hscpp_hsc && ".
1740 "$HsCpp $lit2pgm_hscpp >> $hscpp_hsc";
1741 @Files_to_tidy = ( $hscpp_hsc );
1742 &run_something($to_do, 'Ineffective C pre-processor');
1744 local($includes) = '-I' . join(' -I',@Include_dir);
1745 $to_do = "echo '#line 1 \"$in_lit2pgm\"' > $hscpp_hsc && ".
1746 "$HsCpp $Verbose $genSPECS_flag @HsCpp_flags -D__HASKELL1__=$Haskell1Version -D__GLASGOW_HASKELL__=$GhcVersionInfo $includes $lit2pgm_hscpp >> $hscpp_hsc";
1747 @Files_to_tidy = ( $hscpp_hsc );
1748 &run_something($to_do, 'Haskellised C pre-processor');
1755 sub runHscAndProcessInterfaces {
1756 local($ifile, $hscpp_hsc, $ifile_root, $ofile_target, $hifile_target) = @_;
1758 # $ifile is the original input file
1759 # $hscpp_hsc post-unlit, post-cpp, etc., input file
1760 # $ifile_root input filename minus suffix
1761 # $ofile_target the output file that we ultimately hope to produce
1762 # $hifile_target the .hi file ... (ditto)
1764 local($source_unchanged) = 1;
1766 # Check if the source file is up to date relative to the target; in
1767 # that case we say "source is unchanged" and let the compiler bail out
1768 # early if the import usage information allows it.
1770 ($i_dev,$i_ino,$i_mode,$i_nlink,$i_uid,$i_gid,$i_rdev,$i_size,
1771 $i_atime,$i_mtime,$i_ctime,$i_blksize,$i_blocks) = stat($ifile);
1773 if ( ! -f $ofile_target ) {
1774 # print STDERR "$Pgm:compile:Output file $ofile_target doesn't exist\n";
1775 $source_unchanged = 0;
1778 ($o_dev,$o_ino,$o_mode,$o_nlink,$o_uid,$o_gid,$o_rdev,$o_size,
1779 $o_atime,$o_mtime,$o_ctime,$o_blksize,$o_blocks) = stat(_); # stat info from -f test
1781 if ( ! -f $hifile_target ) {
1782 # print STDERR "$Pgm:compile:Interface file $hifile_target doesn't exist\n";
1783 $source_unchanged = 0;
1786 ($hi_dev,$hi_ino,$hi_mode,$hi_nlink,$hi_uid,$hi_gid,$hi_rdev,$hi_size,
1787 $hi_atime,$hi_mtime,$hi_ctime,$hi_blksize,$hi_blocks) = stat(_); # stat info from -f test
1789 if ($i_mtime > $o_mtime) {
1790 # print STDERR "$Pgm:recompile:Input file $ifile newer than $ofile_target\n";
1791 $source_unchanged = 0;
1794 # So if source_unchanged is still "1", we pass on the good news to the compiler
1795 # The -recomp flag can disable this, forcing recompilation
1796 if ($Do_recomp_chkr && $source_unchanged) {
1797 push(@HsC_flags, '-fsource-unchanged');
1802 &runHsc($ifile_root, $hsc_out, $hsc_hi, $going_interactive);
1804 # See if it bailed out early, saying nothing needed doing.
1805 # We work this out by seeing if it created an output .hi file
1807 if ( ! -f $hsc_hi ) {
1808 # Doesn't exist, so we bailed out early.
1809 # Tell the C compiler and assembler not to run
1810 $do_cc = 0; $do_as = 0;
1812 # Update dependency info, touch both object file and
1813 # interface file, so that the following invariant is
1816 # a dependent module's interface file should after recompilation
1817 # checking be newer than the interface files of its imports.
1819 # That is, if module A's interface file changes, then module B
1820 # (which import from A) needs to be checked.
1821 # If A's change does not affect B, which causes the compiler to bail
1822 # out early, we still need to touch the interface file of B. The reason
1823 # for this is that B may export A's interface.
1825 &run_something("touch $ofile_target $hifile_target",
1826 "Touch $ofile_target $hifile_target, to propagate dependencies");
1830 # Didn't bail out early (new .hi file) so we thunder on
1832 # If non-interactive, heave in the consistency info at the end
1833 # NB: pretty hackish (depends on how $output is set)
1834 if ( ! $going_interactive ) {
1835 if ( $HscOut eq '-C=' ) {
1836 $to_do = "echo 'static char ghc_hsc_ID[] = \"\@(#)hsc $ifile\t$HsC_major_version.$HsC_minor_version,$HsC_consist_options\";' >> $hsc_out";
1838 } elsif ( $HscOut eq '-S=' ) {
1839 local($consist) = "hsc.$ifile.$HsC_major_version.$HsC_minor_version.$HsC_consist_options";
1840 $consist =~ s/,/./g;
1841 $consist =~ s/\//./g;
1842 $consist =~ s/-/_/g;
1843 $consist =~ s/[^A-Za-z0-9_.]/ZZ/g; # ToDo: properly?
1844 $to_do = "echo '\n\t.text\n$consist:' >> $hsc_out";
1846 &run_something($to_do, 'Pin on Haskell consistency info');
1850 # Interface-handling is important enough to live off by itself
1851 require('ghc-iface.prl')
1852 || &tidy_up_and_die(1,"$Pgm: panic: can't load ghc-iface.prl!\n");
1854 &postprocessHiFile($hsc_hi, $hifile_target, $going_interactive);
1856 # save a copy of the .hc file, even if we are carrying on...
1857 if ($HscOut eq '-C=' && $do_cc && $Keep_hc_file_too) {
1858 local($to_do) = "$Rm $ifile_root.hc; $Cp $hsc_out $ifile_root.hc";
1859 &run_something($to_do, 'Saving copy of .hc file');
1862 # save a copy of the .s file, even if we are carrying on...
1863 if ($HscOut eq '-S=' && $do_as && $Keep_s_file_too) {
1864 local($to_do) = "$Rm $ifile_root.s; $Cp $hsc_out $ifile_root.s";
1865 &run_something($to_do, 'Saving copy of .s file');
1868 # if we're going to split up object files,
1869 # we inject split markers into the .hc file now
1870 if ( $HscOut eq '-C=' && $SplitObjFiles ) {
1871 &inject_split_markers ( $hsc_out );
1880 local($ifile_root, $hsc_out, $hsc_hi, $going_interactive) = @_;
1882 # prepend comma to HsP flags (so hsc can tell them apart...)
1883 foreach $a ( @HsP_flags ) { $a = ",$a" unless $a =~ /^,/; }
1885 &makeHiMap() unless $HiMapDone;
1886 # print STDERR "HiIncludes: $HiIncludeString\n";
1887 push(@HsC_flags, "-himap=$HiIncludeString");
1888 # push(@HsC_flags, "-himap=$HiMapFile");
1890 # here, we may produce .hc/.s and/or .hi files
1891 local($output) = '';
1892 @Files_to_tidy = ();
1894 if ( $going_interactive ) {
1895 # don't need .hi unless going to show it on stdout:
1896 $ProduceHi = '-nohifile=' if ! $HiOnStdout;
1897 $do_cc = 0; $do_as = 0; $Do_lnkr = 0; # and we won't go any further...
1900 # set up for producing output/.hi; note that flag twiddling
1901 # may mean that nothing will actually be produced:
1902 $output = "$ProduceHi$hsc_hi $HscOut$hsc_out";
1903 @Files_to_tidy = ( $hsc_hi, $hsc_out );
1905 # if we're compiling foo.hs, we want the GC stats to end up in foo.stat
1906 if ( $CollectingGCstats ) {
1907 push(@HsC_rts_flags, "-S$ifile_root.stat");
1908 push(@Files_to_tidy, "$ifile_root.stat");
1911 if ( $CollectGhcTimings ) { # assume $RTS_style eq 'ghc'
1912 # emit nofibbish time/bytes-alloc stats to stderr;
1913 # see later .stat file post-processing
1914 push(@HsC_rts_flags, "-s$Tmp_prefix.stat");
1915 push(@Files_to_tidy, "$Tmp_prefix.stat");
1919 if ($Specific_dump_file ne '') {
1920 $dump = "2>> $Specific_dump_file";
1921 $Using_dump_file = 1;
1925 $to_do = "$HsC @HsP_flags ,$hscpp_hsc $dump @HsC_flags $CoreLint $StgLint $Verbose $output +RTS @HsC_rts_flags";
1926 &run_something($to_do, 'Haskell compiler');
1928 # finish business w/ nofibbish time/bytes-alloc stats
1929 &process_ghc_timings() if $CollectGhcTimings;
1933 Use \tr{@Import_dir} and \tr{@SysImport_dir} to make a tmp file
1934 of (module-name, pathname) pairs, one per line, separated by a space.
1939 $HiIncludeString = (); # dir1:dir2:dir3, to pass to GHC
1943 # collect in %HiMap; write later; also used elsewhere in driver
1945 local($mod, $path, $d, $e);
1947 # reset the global variables:
1951 $HiIncludeString = (); # dir1:dir2:dir3, to pass to GHC
1953 foreach $d ( @Import_dir ) {
1954 if ($HiIncludeString) { $HiIncludeString = "$HiIncludeString:$d";
1955 } else { $HiIncludeString = $d; }
1957 # The compiler does the searching now
1959 # opendir(DIR, $d) || &tidy_up_and_die(1,"$Pgm: error when reading directory: $d\n");
1960 # local(@entry) = readdir(DIR);
1961 # foreach $e ( @entry ) {
1962 # next unless $e =~ /\b([A-Z][A-Za-z0-9_]*)\.${HiSuffix_prelude}$/o;
1965 # $path =~ s,^\./,,;
1967 # if ( ! defined($HiMap{$mod}) ) {
1968 # $HiMap{$mod} = $path;
1970 # &already_mapped_err($mod, $HiMap{$mod}, $path);
1973 # closedir(DIR); # || &tidy_up_and_die(1,"$Pgm: error when closing directory: $d\n");
1976 foreach $d ( @SysImport_dir ) {
1977 if ($HiIncludeString) { $HiIncludeString = "$HiIncludeString:$d";
1978 } else { $HiIncludeString = $d; }
1980 # opendir(DIR, $d) || &tidy_up_and_die(1,"$Pgm: error when reading directory: $d\n");
1981 # local(@entry) = readdir(DIR);
1982 # foreach $e ( @entry ) {
1983 # next unless $e =~ /([A-Z][A-Za-z0-9_]*)\.$HiSuffix$/o;
1984 # next if $NoImplicitPrelude && $e =~ /Prelude\.$HiSuffix$/o;
1988 # $path =~ s,^\./,,;
1990 # if ( ! defined($HiMap{$mod}) ) {
1991 # $HiMap{$mod} = $path;
1992 # } elsif ( $mod ne 'Main' ) { # saves useless warnings...
1993 # &already_mapped_err($mod, $HiMap{$mod}, $path);
1996 # closedir(DIR); # || &tidy_up_and_die(1,"$Pgm: error when closing directory: $d\n");
2000 # Not currently used:
2002 # $HiMapFile = "$Tmp_prefix.himap";
2003 # unlink($HiMapFile);
2004 # open(HIMAP, "> $HiMapFile") || &tidy_up_and_die(1,"$Pgm: can't open $HiMapFile\n");
2005 # foreach $d (keys %HiMap) {
2006 # print HIMAP $d, ' ', $HiMap{$d}, "\n";
2008 # close(HIMAP) || &tidy_up_and_die(1,"$Pgm: error when closing $HiMapFile\n");
2013 sub already_mapped_err {
2014 local($mod, $mapped_to, $path) = @_;
2016 # OK, it isn't really an error if $mapped_to and $path turn
2017 # out to be the same thing.
2018 ($m_dev,$m_ino,$m_mode,$m_nlink,$m_uid,$m_gid,$m_rdev,$m_size,
2019 $m_atime,$m_mtime,$m_ctime,$m_blksize,$m_blocks) = stat($mapped_to);
2020 ($p_dev,$p_ino,$p_mode,$p_nlink,$p_uid,$p_gid,$p_rdev,$p_size,
2021 $p_atime,$p_mtime,$p_ctime,$p_blksize,$p_blocks) = stat($path);
2023 return if $m_ino == $p_ino; # same inode number
2025 print STDERR "$Pgm: module $mod already mapped to $mapped_to";
2026 print STDERR ";\n\tignoring: $path\n";
2030 %************************************************************************
2032 \section[Driver-misc-utils]{Miscellaneous utilities}
2034 %************************************************************************
2036 %************************************************************************
2038 \subsection[Driver-odir-ify]{@odir_ify@: Mangle filename if \tr{-odir} set}
2040 %************************************************************************
2044 local($ofile,$def_suffix) = @_;
2046 return(($Osuffix eq '') ? "$ofile.$def_suffix" : "$ofile.$Osuffix" );
2050 local($orig_file, $def_suffix) = @_;
2051 if ($Specific_output_dir eq '') { # do nothing
2052 &osuf_ify($orig_file, $def_suffix);
2054 local ($orig_file_only);
2055 ($orig_file_only = $orig_file) =~ s|.*/||;
2056 &osuf_ify("$Specific_output_dir/$orig_file_only",$def_suffix);
2063 local($is_hc_file, $hsc_out, $cc_as_o) = @_;
2065 local($includes) = '-I' . join(' -I', @Include_dir);
2068 local($c_flags) = "@CcBoth_flags";
2069 local($ddebug_flag) = ( $DEBUGging ) ? '-DDEBUG' : '';
2071 # "input" files to use that are not in some weird directory;
2072 # to help C compilers grok .hc files [ToDo: de-hackify]
2073 local($cc_help) = "ghc$$.c";
2074 local($cc_help_s) = "ghc$$.s";
2077 $s_output = ($is_hc_file || $TargetPlatform =~ /^(hppa|i386)/) ? $cc_as_o : $cc_as;
2078 $c_flags .= " @CcRegd_flags";
2079 $c_flags .= ($is_hc_file) ? " @CcRegd_flags_hc" : " @CcRegd_flags_c";
2081 # C compiler won't like the .hc extension. So we create
2082 # a tmp .c file which #include's the needful.
2083 open(TMP, "> $cc_help") || &tidy_up_and_die(1,"$Pgm: failed to open `$cc_help' (to write)\n");
2084 if ( $is_hc_file ) {
2086 #ifdef __STG_GCC_REGS__
2087 # if ! (defined(MAIN_REG_MAP) || defined(MARK_REG_MAP) || defined(SCAN_REG_MAP) || defined(SCAV_REG_MAP) || defined(FLUSH_REG_MAP))
2088 # define MAIN_REG_MAP
2091 #include "stgdefs.h"
2093 # user may have asked for #includes to be injected...
2094 print TMP @CcInjects if $#CcInjects >= 0;
2096 # heave in the consistency info
2097 print TMP "static char ghc_cc_ID[] = \"\@(#)cc $ifile\t$Cc_major_version.$Cc_minor_version,$Cc_consist_options\";\n";
2099 # and #include the real source
2100 print TMP "#include \"$hsc_out\"\n";
2101 close(TMP) || &tidy_up_and_die(1,"Failed writing to $cc_help\n");
2103 local($to_do) = "$cc $Verbose $ddebug_flag $c_flags @Cpp_define -D__HASKELL1__=$Haskell1Version $includes $cc_help > $Tmp_prefix.ccout 2>&1 && ( if [ $cc_help_s != $s_output ] ; then mv $cc_help_s $s_output ; else exit 0 ; fi )";
2104 # note: __GLASGOW_HASKELL__ is pointedly *not* #defined at the C level.
2105 if ( $Only_preprocess_C ) { # HACK ALERT!
2106 $to_do =~ s/ -S\b//g;
2108 @Files_to_tidy = ( $cc_help, $cc_help_s, $s_output );
2109 $PostprocessCcOutput = 1; # hack, dear hack...
2110 &run_something($to_do, 'C compiler');
2111 $PostprocessCcOutput = 0;
2112 unlink($cc_help, $cc_help_s);
2118 local($is_hc_file, $cc_as_o, $cc_as, $ifile_root) = @_;
2120 if ( $is_hc_file ) {
2121 # dynamically load assembler-fiddling code, which we are about to use:
2122 require('ghc-asm.prl')
2123 || &tidy_up_and_die(1,"$Pgm: panic: can't load ghc-asm.prl!\n");
2126 print STDERR `cat $cc_as_o` if $Dump_raw_asm; # to stderr, before mangling
2129 # post-process the assembler [.hc files only]
2130 &mangle_asm($cc_as_o, $cc_as);
2134 #OLD: local($target) = 'oops';
2135 #OLD: $target = '-alpha' if $TargetPlatform =~ /^alpha-/;
2136 #OLD: $target = '-hppa' if $TargetPlatform =~ /^hppa/;
2137 #OLD: $target = '-old-asm' if $TargetPlatform =~ /^i386-/;
2138 #OLD: $target = '-m68k' if $TargetPlatform =~ /^m68k-/;
2139 #OLD: $target = '-mips' if $TargetPlatform =~ /^mips-/;
2140 #OLD: $target = '' if $TargetPlatform =~ /^powerpc-/;
2141 #OLD: $target = '-solaris' if $TargetPlatform =~ /^sparc-sun-solaris2/;
2142 #OLD: $target = '-sparc' if $TargetPlatform =~ /^sparc-sun-sunos4/;
2144 #OLD: if ( $target ne '' ) {
2145 #OLD: require("ghc-asm$target.prl")
2146 #OLD: || &tidy_up_and_die(1,"$Pgm: panic: can't load ghc-asm$target.prl!\n");
2147 #OLD: &mangle_asm($cc_as_o, "$cc_as-2"); # the OLD one!
2148 #OLD: &run_something("$Cmp -s $cc_as-2 $cc_as || $Diff $cc_as-2 $cc_as 1>&2 || exit 0",
2149 #OLD: "Diff'ing old and new mangled .s files"); # NB: to stderr
2152 } elsif ($TargetPlatform =~ /^hppa/) {
2153 # minor mangling of non-threaded files for hp-pa only
2154 require('ghc-asm.prl')
2155 || &tidy_up_and_die(1,"$Pgm: panic: can't load ghc-asm-hppa.prl!\n");
2156 &mini_mangle_asm_hppa($cc_as_o, $cc_as);
2158 } elsif ($TargetPlatform =~ /^i386/) {
2159 # extremely-minor OFFENSIVE mangling of non-threaded just one file
2160 require('ghc-asm.prl')
2161 || &tidy_up_and_die(1,"$Pgm: panic: can't load ghc-asm.prl!\n");
2162 &mini_mangle_asm_i386($cc_as_o, $cc_as);
2165 # save a copy of the .s file, even if we are carrying on...
2166 if ($do_as && $Keep_s_file_too) {
2167 local($to_do) = "$Rm $ifile_root.s; $Cp $cc_as $ifile_root.s";
2168 &run_something($to_do, 'Saving copy of .s file');
2175 local($as_out, $ifile_root) = @_;
2177 local($asmblr) = ( $As ) ? $As : $CcRegd;
2179 if ( ! $SplitObjFiles ) {
2180 local($to_do) = "$asmblr -o $as_out -c @As_flags $cc_as";
2181 @Files_to_tidy = ( $as_out );
2182 &run_something($to_do, 'Unix assembler');
2184 } else { # more complicated split-ification...
2186 # must assemble files $Tmp_prefix__[1 .. $NoOfSplitFiles].s
2188 # If -odir is used, great, just pin it in front of the
2189 # generated split file names. If it hasn't been set, we
2190 # snatch it from the ifile_root.
2194 if ( $Specific_output_dir eq '' ) {
2195 $Specific_output_dir = ${ifile_root};
2198 for ($f = 1; $f <= $NoOfSplitFiles; $f++ ) {
2199 local($split_out) = &odir_ify("${ifile_root}__${f}",'o');
2200 local($to_do) = "$asmblr -o $split_out -c @As_flags ${Tmp_prefix}__${f}.s";
2201 @Files_to_tidy = ( $split_out );
2203 &run_something($to_do, 'Unix assembler');
2209 %************************************************************************
2211 \subsection[Driver-run-something]{@run_something@: Run a phase}
2213 %************************************************************************
2217 local($str_to_do, $tidy_name) = @_;
2219 print STDERR "\n$tidy_name:\n\t" if $Verbose;
2220 print STDERR "$str_to_do\n" if $Verbose;
2222 if ($Using_dump_file) {
2223 open(DUMP, ">> $Specific_dump_file")
2224 || &tidy_up_and_die(1,"$Pgm: failed to open `$Specific_dump_file'\n");
2225 print DUMP "\nCompilation Dump for: $str_to_do\n\n";
2227 || &tidy_up_and_die(1,"$Pgm: failed closing `$Specific_dump_file'\n");
2230 local($return_val) = 0;
2231 system("$Time $str_to_do");
2234 if ( $PostprocessCcOutput ) { # hack, continued
2235 open(CCOUT, "< $Tmp_prefix.ccout")
2236 || &tidy_up_and_die(1,"$Pgm: failed to open `$Tmp_prefix.ccout'\n");
2238 next if /attribute directive ignored/;
2239 next if /call-clobbered/;
2240 next if /from .*COptRegs\.lh/;
2241 next if /from .*(stg|rts)defs\.h:/;
2242 next if /from ghc\d+.c:\d+:/;
2243 next if /from .*\.lc/;
2244 next if /from .*SMinternal\.l?h/;
2245 next if /ANSI C does not support \`long long\'/;
2246 next if /warning:.*was declared \`extern\' and later \`static\'/;
2247 next if /warning: assignment discards \`const\' from pointer target type/;
2248 next if /: At top level:$/;
2249 next if /: In function \`.*\':$/;
2250 next if /\`ghc_cc_ID\' defined but not used/;
2253 close(CCOUT) || &tidy_up_and_die(1,"$Pgm: failed closing `$Tmp_prefix.ccout'\n");
2256 if ($return_val != 0) {
2257 if ($Using_dump_file) {
2258 print STDERR "Compilation Errors dumped in $Specific_dump_file\n";
2261 &tidy_up_and_die($return_val, '');
2263 $Using_dump_file = 0;
2267 %************************************************************************
2269 \subsection[Driver-ghctiming]{Emit nofibbish GHC timings}
2271 %************************************************************************
2273 NB: nearly the same as in @runstdtest@ script.
2276 sub process_ghc_timings {
2277 local($StatsFile) = "$Tmp_prefix.stat";
2278 local($SysSpecificTiming) = 'ghc';
2280 open(STATS, $StatsFile) || die "Failed when opening $StatsFile\n";
2281 local($tot_live) = 0; # for calculating avg residency
2284 $tot_live += $1 if /^\s*\d+\s+\d+\s+\d+\.\d+\%\s+(\d+)\s+\d+\.\d+\%/;
2286 $BytesAlloc = $1 if /^\s*([0-9,]+) bytes allocated in the heap/;
2288 if ( /^\s*([0-9,]+) bytes maximum residency .* (\d+) sample/ ) {
2289 $MaxResidency = $1; $ResidencySamples = $2;
2292 $GCs = $1 if /^\s*([0-9,]+) garbage collections? performed/;
2294 if ( /^\s*INIT\s+time\s*(\d+\.\d\d)s\s*\(\s*(\d+\.\d\d)s elapsed\)/ ) {
2295 $InitTime = $1; $InitElapsed = $2;
2296 } elsif ( /^\s*MUT\s+time\s*(\d+\.\d\d)s\s*\(\s*(\d+\.\d\d)s elapsed\)/ ) {
2297 $MutTime = $1; $MutElapsed = $2;
2298 } elsif ( /^\s*GC\s+time\s*(\d+\.\d\d)s\s*\(\s*(\d+\.\d\d)s elapsed\)/ ) {
2299 $GcTime = $1; $GcElapsed = $2;
2302 close(STATS) || die "Failed when closing $StatsFile\n";
2303 if ( defined($ResidencySamples) && $ResidencySamples > 0 ) {
2304 $AvgResidency = int ($tot_live / $ResidencySamples) ;
2307 # warn about what we didn't find
2308 print STDERR "Warning: BytesAlloc not found in stats file\n" unless defined($BytesAlloc);
2309 print STDERR "Warning: GCs not found in stats file\n" unless defined($GCs);
2310 print STDERR "Warning: InitTime not found in stats file\n" unless defined($InitTime);
2311 print STDERR "Warning: InitElapsed not found in stats file\n" unless defined($InitElapsed);
2312 print STDERR "Warning: MutTime not found in stats file\n" unless defined($MutTime);
2313 print STDERR "Warning: MutElapsed not found in stats file\n" unless defined($MutElapsed);
2314 print STDERR "Warning: GcTime inot found in stats file\n" unless defined($GcTime);
2315 print STDERR "Warning: GcElapsed not found in stats file\n" unless defined($GcElapsed);
2317 # things we didn't necessarily expect to find
2318 $MaxResidency = 0 unless defined($MaxResidency);
2319 $AvgResidency = 0 unless defined($AvgResidency);
2320 $ResidencySamples = 0 unless defined($ResidencySamples);
2323 $BytesAlloc =~ s/,//g;
2324 $MaxResidency =~ s/,//g;
2326 $InitTime =~ s/,//g;
2327 $InitElapsed =~ s/,//g;
2329 $MutElapsed =~ s/,//g;
2331 $GcElapsed =~ s/,//g;
2333 # print out what we found
2334 print STDERR "<<$SysSpecificTiming: ",
2335 "$BytesAlloc bytes, $GCs GCs, $AvgResidency/$MaxResidency avg/max bytes residency ($ResidencySamples samples), $InitTime INIT ($InitElapsed elapsed), $MutTime MUT ($MutElapsed elapsed), $GcTime GC ($GcElapsed elapsed)",
2336 " :$SysSpecificTiming>>\n";
2343 %************************************************************************
2345 \subsection[Driver-dying]{@tidy_up@ and @tidy_up_and_die@: Dying gracefully}
2347 %************************************************************************
2351 local($to_do) = "\n$Rm $Tmp_prefix*";
2352 if ( $Tmp_prefix !~ /^\s*$/ ) {
2353 print STDERR "$to_do\n" if $Verbose;
2358 sub tidy_up_and_die {
2359 local($return_val, $msg) = @_;
2361 # delete any files to tidy
2362 print STDERR "deleting... @Files_to_tidy\n" if $Verbose && $#Files_to_tidy >= 0;
2363 unlink @Files_to_tidy if $#Files_to_tidy >= 0;
2367 exit (($return_val == 0) ? 0 : 1);
2371 %************************************************************************
2373 \subsection[Driver-arg-with-arg]{@grab_arg_arg@: Do an argument with an argument}
2375 %************************************************************************
2377 Some command-line arguments take an argument, e.g.,
2378 \tr{-Rmax-heapsize} expects a number to follow. This can either be
2379 given a part of the same argument (\tr{-Rmax-heapsize8M}) or as the
2380 next argument (\tr{-Rmax-heapsize 8M}). We allow both cases.
2382 Note: no error-checking; \tr{-Rmax-heapsize -Rgc-stats} will silently
2383 gobble the second argument (and probably set the heapsize to something
2387 local(*Args, $option, $rest_of_arg) = @_;
2390 return($rest_of_arg);
2391 } elsif ($#Args >= 0) {
2392 local($temp) = $Args[0]; shift(@Args);
2395 print STDERR "$Pgm: no argument following $option option\n";
2406 #Not in HsC_antiflag ## NO!: and not already in HsC_flags
2408 foreach $f ( @HsC_antiflags ) {
2409 return(0) if $flag eq $f;
2411 # foreach $f ( @HsC_flags ) {
2412 # return(0) if $flag eq $f;
2417 sub squashHscFlag { # pretty terrible
2421 foreach $f ( @HsC_flags ) {
2422 if ($flag eq $f) { $f = ''; }
2430 foreach $f ( @flags ) {
2431 push( @HsC_flags, $f ) if &isntAntiFlag($f);
2436 Source files may have {-# OPTIONS ... #-} pragmas at the top, containing
2437 command line options we want to append to collection of commands specified
2438 directly. @check_for_source_options@ looks at the top of a de-lit'ified Haskell
2439 file for any such pragmas:
2442 sub check_for_source_options {
2445 open(FILE,$file) || return(1); # No big loss
2448 if ( /^{-# OPTIONS (.*)#-}/ ) {
2449 # add the options found at the back of the command line.
2450 local(@entries) = split(/\s+/,$1);
2451 push(@File_options, @entries);
2453 elsif ( /^$/ ) { # ignore empty lines
2456 else { # stop looking, something non-empty / not
2457 # {-# OPTIONS .. #-} encountered.
2467 We split the initial argv up into three arrays:
2473 the reason for doing so is to be able to deal
2474 with {-# OPTIONS #-} pragma in source files properly.
2480 arg: while($_ = $args[0]) {
2482 # sigh, we have to deal with these -option arg specially here.
2483 /^-(tmpdir|odir|o|isuf|osuf|hisuf|hisuf-prelude|odump|syslib)$/ &&
2484 do { push(@Cmd_opts, $_); push(@Cmd_opts,$args[0]); shift(@args); next arg; };
2485 /^-./ && do { push(@Cmd_opts, $_); next arg; };
2488 push(@Link_file, $_);
2490 push(@Input_file, $_);
2493 # input files must exist:
2495 print STDERR "$Pgm: input file doesn't exist: $_\n";
2503 Command-line processor
2509 # can't use getopt(s); what we want is too complicated
2511 arg: while($_ = $Args[0]) {
2514 #---------- help -------------------------------------------------------
2515 if (/^-\?$/ || /^--?help$/) { print $LongUsage; exit $Status; }
2517 #-----------version ----------------------------------------------------
2518 /^--version$/ && do { print STDERR "${PROJECTNAME}, version ${PROJECTVERSION} ${PROJECTPATCHLEVEL}\n"; exit $Status; };
2520 #---------- verbosity and such -----------------------------------------
2521 /^-v$/ && do { $Verbose = '-v'; $Time = 'time'; next arg; };
2523 #---------- what phases are to be run ----------------------------------
2524 /^-recomp/ && do { $Do_recomp_chkr = 1; next arg; };
2526 /^-cpp$/ && do { $Cpp_flag_set = 1; next arg; };
2527 # change the global default:
2528 # we won't run cat; we'll run the real thing
2530 /^-C$/ && do { $Do_cc = 0; $Do_as = 0; $Do_lnkr = 0; $HscOut = '-C=';
2532 # stop after generating C
2534 /^-noC$/ && do { $HscOut = '-N='; $ProduceHi = '-nohifile=';
2535 $Do_cc = 0; $Do_as = 0; $Do_lnkr = 0;
2537 # leave out actual C generation (debugging) [also turns off interface gen]
2539 /^-hi$/ && do { $HiOnStdout = 1; $ProduceHi = '-hifile='; next arg; };
2540 # _do_ generate an interface; usually used as: -noC -hi
2542 /^-nohi$/ && do { $ProduceHi = '-nohifile='; next arg; };
2543 # don't generate an interface (even if generating C)
2545 /^-hi-diffs$/ && do { $HiDiff_flag = 'normal'; next arg; };
2546 /^-hi-diffs-with-usages$/ && do { $HiDiff_flag = 'usages'; next arg; };
2547 /^-no-hi-diffs$/ && do { $HiDiff_flag = ''; next arg; };
2548 # show/disable diffs if the interface file changes
2550 /^-E$/ && do { push(@CcBoth_flags, '-E');
2551 $Only_preprocess_C = 1;
2552 $Do_as = 0; $Do_lnkr = 0; next arg; };
2553 # stop after preprocessing C
2554 /^-M$/ && do { $Only_generate_deps = 1; $Do_as = 0; $Do_lnkr = 0; next arg; };
2555 # only generate dependency information.
2556 /^-S$/ && do { $Do_as = 0; $Do_lnkr = 0; next arg; };
2557 # stop after generating assembler
2559 /^-c$/ && do { $Do_lnkr = 0; next arg; };
2560 # stop after generating .o files
2562 /^-link-chk$/ && do { $LinkChk = 1; next arg; };
2563 /^-no-link-chk$/ && do { $LinkChk = 0; next arg; };
2564 # don't do consistency-checking after a link
2566 /^-tmpdir$/ && do { $Tmp_prefix = &grab_arg_arg(*Args,'-tmpdir', '');
2567 $Tmp_prefix = "$Tmp_prefix/ghc$$";
2568 $ENV{'TMPDIR'} = $Tmp_prefix; # for those who use it...
2570 # use an alternate directory for temp files
2572 #---------- redirect output --------------------------------------------
2574 # -o <file>; applies to the last phase, whatever it is
2575 # "-o -" sends it to stdout
2576 # if <file> has a directory component, that dir must already exist
2578 /^-odir$/ && do { $Specific_output_dir = &grab_arg_arg(*Args,'-odir', '');
2580 # Hack, of the worst sort: don't do validation of
2581 # odir argument if you're using -M (dependency generation).
2583 if ( ! $Only_generate_deps && ! -d $Specific_output_dir) {
2584 print STDERR "$Pgm: -odir: no such directory: $Specific_output_dir\n";
2589 /^-o$/ && do { $Specific_output_file = &grab_arg_arg(*Args,'-o', '');
2590 if ($Specific_output_file ne '-'
2591 && $Specific_output_file =~ /(.*)\/[^\/]*$/) {
2592 local($dir_part) = $1;
2593 if (! -d $dir_part) {
2594 print STDERR "$Pgm: no such directory: $dir_part\n";
2600 # NB: -isuf not documented yet (because it doesn't work yet)
2601 /^-isuf$/ && do { $Isuffix = &grab_arg_arg(*Args,'-isuf', '');
2602 if ($Isuffix =~ /\./ ) {
2603 print STDERR "$Pgm: -isuf suffix shouldn't contain a .\n";
2608 /^-osuf$/ && do { $Osuffix = &grab_arg_arg(*Args,'-osuf', '');
2609 if ($Osuffix =~ /\./ ) {
2610 print STDERR "$Pgm: -osuf suffix shouldn't contain a .\n";
2615 # -ohi <file>; send the interface to <file>; "-ohi -" to send to stdout
2616 /^-ohi$/ && do { $Specific_hi_file = &grab_arg_arg(*Args,'-ohi', '');
2617 if ($Specific_hi_file ne '-'
2618 && $Specific_hi_file =~ /(.*)\/[^\/]*$/) {
2619 local($dir_part) = $1;
2620 if (! -d $dir_part) {
2621 print STDERR "$Pgm: no such directory: $dir_part\n";
2627 # The suffix to use when looking for interface files
2628 /^-hisuf$/ && do { $HiSuffix = &grab_arg_arg(*Args,'-hisuf', '');
2629 if ($HiSuffix =~ /\./ ) {
2630 print STDERR "$Pgm: -hisuf suffix shouldn't contain a .\n";
2634 # ToDo: remove, not a `normal' user thing to do (should be automatic)
2635 /^-hisuf-prelude$/ && do { $HiSuffix_prelude = &grab_arg_arg(*Args,'-hisuf-prelude', '');
2636 if ($HiSuffix =~ /\./ ) {
2637 print STDERR "$Pgm: -hisuf-prelude suffix shouldn't contain a .\n";
2641 /^-odump$/ && do { $Specific_dump_file = &grab_arg_arg(*Args,'-odump', '');
2642 if ($Specific_dump_file =~ /(.*)\/[^\/]*$/) {
2643 local($dir_part) = $1;
2644 if (! -d $dir_part) {
2645 print STDERR "$Pgm: no such directory: $dir_part\n";
2651 #-------------- scc & Profiling Stuff ----------------------------------
2653 /^-prof$/ && do { $PROFing = 'p'; next arg; }; # profiling -- details later!
2656 # generate auto SCCs on top level bindings
2657 # -auto-all = all top level bindings
2658 # -auto = only top level exported bindings
2659 $PROFauto = ( /-all/ )
2660 ? '-fauto-sccs-on-all-toplevs'
2661 : '-fauto-sccs-on-exported-toplevs';
2664 /^-caf-all/ && do { # generate individual CAF SCC annotations
2665 $PROFcaf = '-fauto-sccs-on-individual-cafs';
2668 /^-ignore-scc$/ && do {
2669 # forces ignore of scc annotations even if profiling
2670 $PROFignore_scc = '-W';
2673 /^-G(.*)$/ && do { push(@HsC_flags, "-G=$1"); # set group for cost centres
2676 /^-unprof-scc-auto/ && do {
2677 # generate auto SCCs on top level bindings when not profiling.
2678 # Used to measure optimisation effects of presence of sccs.
2679 $UNPROFscc_auto = ( /-all/ )
2680 ? '-fauto-sccs-on-all-toplevs'
2681 : '-fauto-sccs-on-exported-toplevs';
2684 #--------- ticky/concurrent/parallel -----------------------------------
2685 # we sort out the details a bit later on
2687 /^-concurrent$/ && do { $CONCURing = 'c'; next arg; }; # concurrent Haskell
2688 /^-gransim$/ && do { $GRANing = 'g'; next arg; }; # GranSim
2689 /^-ticky$/ && do { $TICKYing = 't'; next arg; }; # ticky-ticky
2690 /^-parallel$/ && do { $PARing = 'p'; next arg; }; # parallel Haskell
2692 #-------------- "user ways" --------------------------------------------
2694 (/^-user-setup-([a-oA-Z])$/ ) &&
2696 /^-user-setup-([a-oA-Z])$/ && do { $BuildTag = "_$1"; };
2698 local($stuff) = $UserSetupOpts{$BuildTag};
2699 local(@opts) = split(/\s+/, $stuff);
2701 # feed relevant ops into the arg-processing loop (if any)
2702 unshift(@Args, @opts) if $#opts >= 0;
2706 #---------- set search paths for libraries and things ------------------
2708 # we do -i just like HBC (-i clears the list; -i<colon-separated-items>
2709 # prepends the items to the list); -I is for including C .h files.
2711 /^-i$/ && do { @Import_dir = (); # import path cleared!
2712 @SysImport_dir = ();
2713 print STDERR "WARNING: import paths cleared by `-i'\n";
2716 /^-i(.*)/ && do { local(@new_items)
2717 = split( /:/, &grab_arg_arg(*Args,'-i', $1));
2718 unshift(@Import_dir, @new_items);
2721 /^-I(.*)/ && do { push(@Include_dir, &grab_arg_arg(*Args,'-I', $1)); next arg; };
2722 /^-L(.*)/ && do { push(@UserLibrary_dir, &grab_arg_arg(*Args,'-L', $1)); next arg; };
2723 /^-l(.*)/ && do { push(@UserLibrary,'-l'.&grab_arg_arg(*Args,'-l', $1)); next arg; };
2725 /^-syslib(.*)/ && do { local($syslib) = &grab_arg_arg(*Args,'-syslib',$1);
2726 print STDERR "$Pgm: no such system library (-syslib): $syslib\n",
2727 $Status++ unless $syslib =~ /^(hbc|ghc|posix|contrib)$/;
2729 unshift(@SysImport_dir,
2731 ? "$InstSysLibDir/$syslib/imports"
2732 : "$TopPwd/hslibs/$syslib/src");
2734 if ( ${INSTALLING} ) {
2735 push(@SysLibrary_dir,
2736 ("$InstSysLibDir/$TargetPlatform"));
2738 push(@SysLibrary_dir,
2739 ("$TopPwd/hslibs/$syslib"
2740 ,"$TopPwd/hslibs/$syslib/cbits"));
2743 push(@SysLibrary, "-lHS$syslib");
2744 push(@SysLibrary, "-lHS${syslib}_cbits")
2745 unless $syslib eq 'contrib'; #HACK! it has no cbits
2749 #=======================================================================
2750 # various flags that we can harmlessly send to one program or another
2751 # (we will later "reclaim" some of the compiler ones now sent to gcc)
2752 #=======================================================================
2754 #---------- this driver itself (ghc) -----------------------------------
2755 # these change what executable is run for each phase:
2756 /^-pgmL(.*)$/ && do { $Unlit = $1; next arg; };
2757 /^-pgmP(.*)$/ && do { $HsCpp = $1; next arg; };
2758 /^-pgmC(.*)$/ && do { $HsC = $1; next arg; };
2759 /^-pgmcO?(.*)$/ && do { $CcRegd = $1; next arg; }; # the O? for back compat
2760 /^-pgma(.*)$/ && do { $As = $1; next arg; };
2761 /^-pgml(.*)$/ && do { $Lnkr = $1; next arg; };
2762 /^-pgmdep(.*)$/ && do { $MkDependHS = $1; next arg; };
2764 #---------- the get-anything-through opts (all pgms) -------------------
2765 # these allow arbitrary option-strings to go to any phase:
2766 /^-optL(.*)$/ && do { push(@Unlit_flags, $1); next arg; };
2767 /^-optP(.*)$/ && do { push(@HsCpp_flags, $1); next arg; };
2768 /^-optCrts(.*)$/&& do { push(@HsC_rts_flags, $1); next arg; };
2769 /^-optC(.*)$/ && do { push(@HsC_flags, $1); next arg; };
2770 /^-optcpp(.*)$/ && do { push(@Cpp_define, $1); next arg; };
2771 /^-optc(.*)$/ && do { push(@CcBoth_flags, $1); next arg; };
2772 /^-opta(.*)$/ && do { push(@As_flags, $1); next arg; };
2773 /^-optl(.*)$/ && do { push(@Ld_flags, $1); next arg; };
2774 /^-optdep(.*)$/ && do { push(@MkDependHS_flags, $1); next arg; };
2776 #---------- Haskell C pre-processor (hscpp) ----------------------------
2777 /^-D(.*)/ && do { push(@HsCpp_flags, "'-D".&grab_arg_arg(*Args,'-D',$1)."'"); next arg; };
2778 /^-U(.*)/ && do { push(@HsCpp_flags, "'-U".&grab_arg_arg(*Args,'-U',$1)."'"); next arg; };
2780 /^-genSPECS/ && do { $Cpp_flag_set = 1;
2781 $genSPECS_flag = $_;
2784 #---------- post-Haskell "assembler"------------------------------------
2785 /^-ddump-raw-asm$/ && do { $Dump_raw_asm = 1; next arg; };
2786 /^-ddump-asm-splitting-info$/ && do { $Dump_asm_splitting_info = 1; next arg; };
2788 #---------- Haskell compiler (hsc) -------------------------------------
2790 /^-keep-hc-files?-too$/ && do { $Keep_hc_file_too = 1; next arg; };
2791 /^-keep-s-files?-too$/ && do { $Keep_s_file_too = 1; next arg; };
2793 /^-fhaskell-1\.3$/ && do { next arg; }; # a no-op right now
2795 /^-fignore-interface-pragmas$/ && do { push(@HsC_flags, $_); next arg; };
2797 /^-fno-implicit-prelude$/ && do { $NoImplicitPrelude= 1; push(@HsC_flags, $_); next arg; };
2798 # don't do stack checking using page fault `trick'.
2800 /^-fstack-check$/ && do { $StkChkByPageFaultOK = 0; next arg; };
2802 # have the compiler proper generate concurrent code,
2803 # really only used when you want to configure your own
2804 # special user compilation way. (Use -concurrent when
2805 # compiling `Concurrent Haskell' programs).
2807 # (ditto for -fgransim, fscc-profiling and -fticky-ticky)
2809 /^-fconcurrent$/ && do { push(@HsC_flags,$_); next arg; };
2810 /^-fscc-profiling$/ && do { push(@HsC_flags,$_); next arg; };
2811 /^-fticky-ticky$/ && do { push(@HsC_flags,$_); next arg; };
2812 /^-fgransim$/ && do { push(@HsC_flags,$_); next arg; };
2814 /^-user-prelude-force/ && do { # ignore if not -user-prelude
2817 /^-split-objs/ && do {
2818 if ( $TargetPlatform !~ /^(alpha|hppa1\.1|i386|m68k|mips|powerpc|sparc)-/ ) {
2820 print STDERR "WARNING: don't know how to split objects on this platform: $TargetPlatform\n`-split-objs' option ignored\n";
2825 push(@HsC_flags, "-fglobalise-toplev-names");
2826 push(@CcBoth_flags, '-DUSE_SPLIT_MARKERS');
2828 require('ghc-split.prl')
2829 || &tidy_up_and_die(1,"$Pgm: panic: can't load ghc-split.prl!\n");
2834 && do { push(@HsC_flags, $_);
2835 push(@HsP_flags, '-N');
2837 # push(@HsC_flags, '-fshow-import-specs');
2841 /^-fspeciali[sz]e-unboxed$/
2842 && do { $Oopt_DoSpecialise = '-fspecialise';
2843 $Oopt_SpecialiseUnboxed = '-fspecialise-unboxed';
2846 && do { $Oopt_DoSpecialise = '-fspecialise'; next arg; };
2847 /^-fno-speciali[sz]e$/
2848 && do { $Oopt_DoSpecialise = ''; next arg; };
2851 # Now the foldr/build options, which are *on* by default (for -O).
2854 && do { $Oopt_FoldrBuild = 1;
2855 $Oopt_FB_Support = '-fdo-arity-expand';
2859 /^-fno-foldr-build$/
2860 && do { $Oopt_FoldrBuild = 0;
2861 $Oopt_FB_Support = '';
2864 /^-fno-foldr-build-rule$/
2865 && do { $Oopt_FoldrBuild = 0;
2868 /^-fno-enable-tech$/
2869 && do { $Oopt_FB_Support = '';
2872 /^-fno-snapback-to-append$/
2873 && do { $Oopt_FoldrBuildInline .= ' -fdo-not-fold-back-append ';
2878 /^-fasm-(.*)$/ && do { $HscOut = '-S='; next arg; }; # force using nativeGen
2879 /^-fvia-C$/ && do { $HscOut = '-C='; next arg; }; # force using C compiler
2883 /^(-funfolding-use-threshold)(.*)$/
2884 && do { $Oopt_UnfoldingUseThreshold = $1 . &grab_arg_arg(*Args,$1, $2);
2887 /^(-fmax-simplifier-iterations)(.*)$/
2888 && do { $Oopt_MaxSimplifierIterations = $1 . &grab_arg_arg(*Args,$1, $2);
2891 /^-fno-pedantic-bottoms$/
2892 && do { $Oopt_PedanticBottoms = ''; next arg; };
2894 /^-fdo-monad-eta-expansion$/
2895 && do { $Oopt_MonadEtaExpansion = $_; next arg; };
2897 /^-fno-let-from-(case|app|strict-let)$/ # experimental, really (WDP 95/10)
2898 && do { push(@HsC_flags, $_); next arg; };
2900 /^(-freturn-in-regs-threshold)(.*)$/
2901 && do { local($what) = $1;
2902 local($num) = &grab_arg_arg(*Args,$what, $2);
2903 if ($num < 2 || $num > 8) {
2904 die "Bad experimental flag: $_\n";
2906 $HscOut = '-C='; # force using C compiler
2907 push(@HsC_flags, "$what$num");
2908 push(@CcRegd_flags, "-D__STG_REGS_AVAIL__=$num");
2912 # --------------- Warnings etc. ------
2914 /^-f(show-import-specs)/
2915 && do { push(@HsC_flags, $_); next arg; };
2917 # for now, just -fwarn-name-shadowing
2918 /^-fwarn-(.*)$/ && do { push(@HsC_flags, $_); next arg; };
2919 /^-fno-(.*)$/ && do { push(@HsC_antiflags, "-f$1");
2920 &squashHscFlag("-f$1");
2923 # --------------- platform specific flags (for gcc mostly) ----------------
2925 /^-mlong-calls$/ && do { # for GCC for HP-PA boxes,
2926 # for 2.6.x..?, does not apply for 2.7.2
2928 unshift(@CcBoth_flags, ( $_ ));
2931 /^-m(v8|sparclite|cypress|supersparc|cpu=(cypress|supersparc))$/
2932 && do { # for GCC for SPARCs
2933 unshift(@CcBoth_flags, ( $_ ));
2936 /^-monly-([432])-regs/ && do { # for iX86 boxes only; no effect otherwise
2937 $StolenX86Regs = $1;
2940 #*************** ... and lots of debugging ones (form: -d* )
2942 # -d(no-)core-lint is done this way so it is turn-off-able.
2943 /^-dcore-lint/ && do { $CoreLint = '-dcore-lint'; next arg; };
2944 /^-dno-core-lint/ && do { $CoreLint = ''; next arg; };
2945 # Ditto for STG lint
2946 /^-dstg-lint/ && do { $StgLint = '-dstg-lint'; next arg; };
2947 /^-dno-stg-lint/ && do { $StgLint = ''; next arg; };
2949 /^-d(dump|ppr)-/ && do { push(@HsC_flags, $_); next arg; };
2950 /^-dverbose-(simpl|stg)/ && do { push(@HsC_flags, $_); next arg; };
2951 /^-dshow-passes/ && do { push(@HsC_flags, $_); next arg; };
2952 /^-dshow-rn-trace/ && do { push(@HsC_flags, $_); next arg; };
2953 /^-dsource-stats/ && do { push(@HsC_flags, $_); next arg; };
2954 /^-dsimplifier-stats/ && do { push(@HsC_flags, $_); next arg; };
2955 /^-dstg-stats/ && do { $Oopt_StgStats = $_; next arg; };
2957 #*************** ... and now all these -R* ones for its runtime system...
2959 /^-Rscale-sizes?(.*)/ && do {
2960 $Scale_sizes_by = &grab_arg_arg(*Args,'-Rscale-sizes', $1);
2963 /^(-H|-Rmax-heapsize)(.*)/ && do {
2964 local($heap_size) = &grab_arg_arg(*Args,$1, $2);
2965 if ($heap_size =~ /(\d+)[Kk]$/) {
2966 $heap_size = $1 * 1000;
2967 } elsif ($heap_size =~ /(\d+)[Mm]$/) {
2968 $heap_size = $1 * 1000 * 1000;
2969 } elsif ($heap_size =~ /(\d+)[Gg]$/) {
2970 $heap_size = $1 * 1000 * 1000 * 1000;
2972 if ($heap_size <= 0) {
2973 print STDERR "$Pgm: resetting heap-size to zero!!! $heap_size\n";
2974 $Specific_heap_size = 0;
2976 # if several heap sizes given, take the largest...
2977 } elsif ($heap_size >= $Specific_heap_size) {
2978 $Specific_heap_size = $heap_size;
2980 print STDERR "$Pgm: ignoring heap-size-setting option ($_)...not the largest seen\n";
2984 /^-(K|Rmax-(stk|stack)size)(.*)/ && do {
2986 local($stk_size) = &grab_arg_arg(*Args,'-Rmax-stksize', $3);
2987 if ($stk_size =~ /(\d+)[Kk]$/) {
2988 $stk_size = $1 * 1000;
2989 } elsif ($stk_size =~ /(\d+)[Mm]$/) {
2990 $stk_size = $1 * 1000 * 1000;
2991 } elsif ($stk_size =~ /(\d+)[Gg]$/) {
2992 $stk_size = $1 * 1000 * 1000 * 1000;
2994 if ($stk_size <= 0) {
2995 print STDERR "$Pgm: resetting stack-size to zero!!! $stk_size\n";
2996 $Specific_stk_size = 0;
2998 # if several stack sizes given, take the largest...
2999 } elsif ($stk_size >= $Specific_stk_size) {
3000 $Specific_stk_size = $stk_size;
3002 print STDERR "$Pgm: ignoring stack-size-setting option ($flag $stk_size)...not the largest seen\n";
3006 /^-Rgc-stats$/ && do { $CollectingGCstats++;
3007 # the two RTSs do this diff ways; we will try to compensate
3010 /^-Rghc-timing/ && do { $CollectGhcTimings = 1; next arg; };
3012 #---------- C high-level assembler (gcc) -------------------------------
3013 /^-(Wall|ansi|pedantic)$/ && do { push(@CcBoth_flags, $_); next arg; };
3015 # -dgcc-lint is a useful way of making GCC very fussy.
3016 # From alan@spri.levels.unisa.edu.au (Alan Modra).
3017 /^-dgcc-lint$/ && do { push(@CcBoth_flags, '-Wall -Wpointer-arith -Wbad-function-cast -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs'); next arg; };
3018 # An alternate set, from mark@sgcs.com (Mark W. Snitily)
3019 # -Wall -Wstrict-prototypes -Wmissing-prototypes -Wcast-align -Wshadow
3021 # inject "#include <wurble>" into the compiler's C output!
3023 /^-#include(.*)/ && do {
3024 local($to_include) = &grab_arg_arg(*Args,'-#include', $1);
3025 push(@CcInjects, "#include $to_include\n");
3028 #---------- Linker (gcc, really) ---------------------------------------
3030 /^-static$/ && do { push(@Ld_flags, $_); next arg; };
3032 #---------- mixed cc and linker magic ----------------------------------
3033 # this optimisation stuff is finally sorted out later on...
3035 /^-O2-for-C$/ && do { $MinusO2ForC = 1; next arg; };
3037 /^-O[1-2]?$/ && do {
3038 local($opt_lev) = ( /^-O2$/ ) ? 2 : 1; # max 'em
3039 $OptLevel = ( $opt_lev > $OptLevel ) ? $opt_lev : $OptLevel;
3041 $HscOut = '-C=' if $OptLevel == 2; # force use of C compiler
3044 /^-Onot$/ && do { $OptLevel = 0; next arg; }; # # set it to <no opt>
3046 /^-Ofile(.*)/ && do {
3048 local($ofile) = &grab_arg_arg(*Args,'-Ofile', $1);
3049 @HsC_minusO3_flags = ();
3051 open(OFILE, "< $ofile") || die "Can't open $ofile!\n";
3054 s/\#.*//; # death to comments
3055 s/[ \t]+//g; # death to whitespace
3056 next if /^$/; # ditto, blank lines
3057 s/([()*{}])/\\$1/g; # protect shell metacharacters
3059 push(@CcBoth_flags, $1);
3061 push(@HsC_minusO3_flags, $_);
3067 /^-debug$/ && do { # all this does is mark a .hc/.o as "debugging"
3068 # in the consistency info
3072 #---------- linking .a file --------------------------------------------
3074 /^-Main(.*)/ && do {
3075 # specifies main or mainPrimIO to be linked
3079 #---------- catch unrecognized flags -----------------------------------
3082 print STDERR "$Pgm: unrecognised option: $_\n";
3088 } # end of processArgs