2 /* --------------------------------------------------------------------------
3 * Configuration options
5 * Copyright (c) The University of Nottingham and Yale University, 1994-1997.
6 * All rights reserved. See NOTICE for details and conditions of use etc...
7 * Hugs version 1.4, December 1997
9 * $RCSfile: options.h,v $
11 * $Date: 2000/02/25 10:53:53 $
12 * ------------------------------------------------------------------------*/
15 /* --------------------------------------------------------------------------
16 * Hugs paths and directories
17 * ------------------------------------------------------------------------*/
19 /* Define this as the default setting of HUGSPATH.
20 * Value may contain string "{Hugs}" (for which we will substitute the
21 * value of HUGSDIR) and should be either colon-separated (Unix)
22 * or semicolon-separated (Macintosh, Windows, DOS). Escape
23 * characters in the path string are interpreted according to normal
24 * Haskell conventions.
26 * This value can be overridden from the command line by setting the
27 * HUGSFLAGS environment variable or by storing an appropriate value
28 * for HUGSFLAGS in the registry (Win32 only). In all cases, use a
29 * string of the form -P"...".
33 /* The directory name which is substituted for the string "{Hugs}"
34 * in a path variable. This normally points to where the Hugs libraries
35 * are installed - ie so that the file HUGSDIR/lib/Prelude.hs exists
37 * "/usr/local/lib/hugs"
38 * "/usr/homes/JFHaskell/hugs"
41 * This value is ignored on Windows and Macintosh versions since
42 * it is assumed that the binary is installed in HUGSDIR.
44 * This value cannot be overridden from the command line or by using
45 * environment variables. This isn't quite as limiting as you'd think
46 * since you can always choose _not_ to use the {Hugs} variable - however,
47 * it's obviously _nicer_ to have it set correctly.
54 /* --------------------------------------------------------------------------
55 * User interface options
56 * ------------------------------------------------------------------------*/
58 /* Define if you want to use the "Hugs for Windows" GUI.
59 * (Windows 3.1 and compatibles only)
61 #define HUGS_FOR_WINDOWS 0
63 /* Define if you want filenames to be converted to normal form by:
64 * o replacing relative pathnames with absolute pathnames and
65 * eliminating .. and . where possible.
66 * o converting to lower case (only in case-insensitive filesystems)
68 #define PATH_CANONICALIZATION 0
70 /* Define if you want the small startup banner.
72 #define SMALL_BANNER 0
74 /* Define if you want to be able to redirect stdout/stderr to a buffer.
75 * Only necessary for the Hugs server interface (which is used in the
76 * Netscape plugin and the standalone evaluator "runhugs").
78 #define REDIRECT_OUTPUT (!HUGS_FOR_WINDOWS)
81 /* --------------------------------------------------------------------------
83 * ------------------------------------------------------------------------*/
85 /* Define one of these to select overall size of Hugs
86 * SMALL_HUGS for 16 bit operation on a limited memory PC.
87 * REGULAR_HUGS for 32 bit operation using largish default table sizes.
88 * LARGE_HUGS for 32 bit operation using larger default table sizes.
91 #define REGULAR_HUGS 0
94 #define NUM_SYNTAX 100
96 #define NUM_OFFSETS 1024
101 #define CHAR_MASK 0xff
103 #if SMALL_HUGS /* the McDonalds mentality :-) */
104 #define Pick(s,r,l) s
107 #define Pick(s,r,l) r
110 #define Pick(s,r,l) l
113 #define MINIMUMHEAP Pick(7500, 19000, 19000)
114 #define MAXIMUMHEAP Pick(32765, 0, 0)
115 #define DEFAULTHEAP Pick(28000, 50000, 350000)
117 #define NUM_SCRIPTS Pick(64, 100, 100)
118 #define NUM_MODULE NUM_SCRIPTS
119 #define NUM_TYCON Pick(60, 160, 400)
120 #define NUM_NAME Pick(1000, 2000, 16000)
121 #define NUM_CLASSES Pick(30, 40, 80)
122 #define NUM_INSTS Pick(200, 300, 600)
123 #define NUM_TEXT Pick(12000, 20000, 100000)
124 #define NUM_TEXTH Pick(1, 10, 10)
125 #define NUM_TYVARS Pick(800, 2000, 4000)
126 #define NUM_STACK Pick(1800, 12000, 16000)
127 #define NUM_DTUPLES Pick(3, 5, 5)
129 #define MAXPOSINT 0x7fffffff
130 #define MINNEGINT (-MAXPOSINT-1)
131 #define MAXHUGSWORD 0xffffffffU
133 #define BIGBASE Pick(100, 10000, 10000)
134 #define BIGEXP Pick(2, 4, 4)
136 #define minRecovery Pick(1000, 1000, 1000)
137 #define bitsPerWord Pick(16, 32, 32)
138 #define wordShift Pick(4, 5, 5)
139 #define wordMask Pick(15, 31, 31)
141 /* Define to force a fixed size (NUM_TYVARS) for the current substitution.
142 * Setting this flag places a limit on the maximum complexity of
143 * expressions handled by the typechecker. It is normally turned off
144 * but may be required for small machines/configurations.
146 #define FIXED_SUBST 0
148 /* Define this to allocate tables dynamically.
149 * This is currently just a memory saving trick, but this may be
150 * extended at a later stage to allow at least some of the tables
151 * to be extended dynamically at run-time to avoid exhausted space errors.
153 #define DYN_TABLES SMALL_HUGS
155 /* Should quantifiers be displayed in error messages.
156 * Warning: not consistently used.
158 #define DISPLAY_QUANTIFIERS 0
160 /* Flags to determine which raw representations and operations are available
162 * o if you turn everything on, you might end up with more then 256
163 * bytecodes: check the value of i_ccall (the lst bytecode) to check
164 * (JRS), 22apr99: I don't think any of the #undef'd ones will work
165 * without attention. However, standard Haskell 98 is supported
166 * is supported without needing them.
168 #undef PROVIDE_STABLE
169 #undef PROVIDE_FOREIGN
171 #undef PROVIDE_CONCURRENT
172 #undef PROVIDE_PTREQUALITY
173 #undef PROVIDE_COERCE
176 /* Set to 1 to use a non-GMP implementation of integer, in the
177 standalone Hugs. Set to 0 in the combined GHC-Hugs system,
178 in which case GNU MP will be used.
180 #define STANDALONE_INTEGER 1
182 /* Enable a crude profiler which counts BCO entries, bytes allocated
183 and bytecode insns executed on a per-fn basis. Used for assessing
184 the effect of the simplifier/optimiser.
186 #undef CRUDE_PROFILING
189 /* Is the default default (Int,Double) or (Integer,Double)?
191 #define DEFAULT_BIGNUM 1
193 /* Are things being used in an interactive setting or a batch setting?
194 * In an interactive setting, System.exitWith should not call _exit
195 * getProgName and getProgArgs need to be handled differently, etc.
197 * Warning: this flag is ignored by an awful lot of code.
201 /* Turn bytecode interpreter support on/off.
203 #define INTERPRETER 1
205 /* Turn on debugging output and some sanity checks
209 /* NB: LAZY_BLACKHOLING has been moved up to Stg.h where both Hugs and GHC can see it,
210 * and EAGER_BLACKHOLING has been introduced also. KSW 1999-01.
213 /* Turn miniinterpreter on/off.
215 * The mininterpreter is portable but slow - if you turn it off,
216 * you'll probably need to provide some assembly language support
217 * for your architecture.
219 #define USE_MINIINTERPRETER 1
221 /* Turn registerisation on/off.
223 * If you turn this off, you'll probably need to provide some
224 * assembly language support for your architecture.
229 /* --------------------------------------------------------------------------
231 * ------------------------------------------------------------------------*/
233 /* Define if T-REX; Typed Rows and EXtension should be enabled */
234 /* Doesn't work in current system - I don't know what the primops do */
237 /* Define if :xplain should be enabled */
238 #define EXPLAIN_INSTANCE_RESOLUTION 0
241 /* Define if you want to run Haskell code through a preprocessor
243 * Note that the :reload command doesn't know about any dependencies
244 * introduced by using #include so you must :load (not :reload) if
245 * you change any #included files (such as configuration files).
247 #define USE_PREPROCESSOR 1
249 /* Define if you want to time every evaluation.
251 * Timing is included in the Hugs distribution for the purpose of benchmarking
252 * the Hugs interpreter, comparing its performance across a variety of
253 * different machines, and with other systems for similar languages.
255 * It would be somewhat foolish to try to use the timings produced in this
256 * way for any other purpose. In particular, using timings to compare the
257 * performance of different versions of an algorithm is likely to give very
258 * misleading results. The current implementation of Hugs as an interpreter,
259 * without any significant optimizations, means that there are much more
260 * significant overheads than can be accounted for by small variations in
263 /* #undef WANT_TIMER */
266 /* --------------------------------------------------------------------------
269 * These options are mostly used for developing/debugging the system.
270 * Since they turn off required parts of the Haskell language, you'll
271 * probably need to modify Prelude.hs and the libraries if you change
273 * ------------------------------------------------------------------------*/
275 /* Define if single-element dictionaries are implemented by newtype.
276 * Should be turned on. Mostly used to make it easier to find which
277 * bits of code implement this optimisation and as a way of documenting
280 #define USE_NEWTYPE_FOR_DICTS 1
282 /* Define if strings should be represented as normal C strings.
283 * Note that this doesn't work if the string contains '\0'
284 * and makes persistence problematic.
285 * Intended as a stop-gap measure until mutable byte arrays are available.
287 #define USE_ADDR_FOR_STRINGS 1
289 /* Define to include support for (n+k) patterns.
290 * Warning: many people in the Haskell committee want to remove n+k patterns.
295 /* --------------------------------------------------------------------------
296 * Debugging options (intended for use by maintainers)
297 * ------------------------------------------------------------------------*/
299 /* Define if debugging generated bytecodes or the bytecode interpreter */
302 /* Define if you want to use a low-level printer from within a debugger */
303 #define DEBUG_PRINTER 1
305 /* --------------------------------------------------------------------------
306 * Experimental features
307 * These are likely to disappear/change in future versions and should not
308 * be used by most people..
309 * ------------------------------------------------------------------------*/
311 /* In a plain Hugs system, most signals (SIGBUS, SIGTERM, etc) indicate
312 * some kind of error in Hugs - or maybe a stack overflow. Rather than
313 * just crash, Hugs catches these errors and returns to the main loop.
314 * It does this by calling a function "panic" which longjmp's back to the
316 * If you're developing a GreenCard library, this may not be the right
317 * behaviour - it's better if Hugs leaves them for your debugger to
318 * catch rather than trapping them and "panicking".
323 /* ----------------------------------------------------------------------- */