2 # -----------------------------------------------------------------------------
4 # (c) 2009 The University of Glasgow
6 # This file is part of the GHC build system.
8 # To understand how the build system works and how to modify it, see
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
10 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
12 # -----------------------------------------------------------------------------
16 # * remove old Makefiles, add new stubs for building in subdirs
18 # * docs/docbook-cheat-sheet/Makefile
19 # * docs/ext-core/Makefile
21 # * docs/storage-mgmt/Makefile
23 # * rts/dotnet/Makefile
25 # * add Makefiles for the rest of the utils/ programs that aren't built
26 # by default (need to exclude them from 'make all' too)
30 # * per-source-file dependencies instead of one .depend file?
31 # * eliminate undefined variables, and use --warn-undefined-variables?
32 # * put outputs from different ways in different subdirs of distdir/build,
33 # then we don't have to use -osuf/-hisuf. We would have to install
34 # them in different places too, so we'd need ghc-pkg support for packages
36 # * make PACKAGES generated by './configure' or './boot'?
37 # * we should use a directory of package.conf files rather than a single
38 # file for the inplace package database, so that we can express
39 # dependencies more accurately. Otherwise it's possible to get into
40 # a state where the package database is out of date, and the build
41 # system doesn't know.
43 # Approximate build order.
45 # The actual build order is defined by dependencies, and the phase
46 # ordering used to ensure correct ordering of makefile-generation; see
47 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
49 # * With bootstrapping compiler:
50 # o Build utils/ghc-cabal
51 # o Build utils/ghc-pkg
52 # o Build utils/hsc2hs
54 # o configure, generate package-data.mk and inplace-pkg-info
55 # o register each package into inplace/lib/package.conf
57 # * With bootstrapping compiler:
58 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
59 # o Build compiler (stage 1)
63 # o Build utils/* (except haddock)
64 # o Build compiler (stage 2)
66 # o Build utils/haddock
67 # o Build compiler (stage 3) (optional)
72 .PHONY: default all haddock
74 # We need second expansion for the way we handle directories, so that
76 # expands to the directory of a rule that uses a % pattern.
81 # Catch make if it runs away into an infinite loop
82 ifeq "$(MAKE_RESTARTS)" ""
83 else ifeq "$(MAKE_RESTARTS)" "1"
84 else ifeq "$(MAKE_RESTARTS)" "2"
86 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
89 ifneq "$(CLEANING)" "YES"
93 # -----------------------------------------------------------------------------
97 space=$(nothing) $(nothing)
100 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
101 # by default, because that disables all the implicit rules, but there doesn't
102 # seem to be a good way to do that. This turns off all the old-style suffix
103 # rules, which does half the job and speeds up make quite a bit:
106 # -----------------------------------------------------------------------------
109 # to see the effective value used for a Makefile variable, do
110 # make show VALUE=MY_VALUE
114 @echo '$(VALUE)="$($(VALUE))"'
116 # -----------------------------------------------------------------------------
117 # Include subsidiary build-system bits
121 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
123 ifeq "$(ProjectVersion)" ""
124 $(error Please run ./configure first)
130 # (Optional) build-specific configuration
131 include mk/custom-settings.mk
133 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
134 ifeq "$(GhcLibWays)" ""
135 $(error $$(GhcLibWays) is empty, it must contain at least one way)
139 # -----------------------------------------------------------------------------
140 # Utility definitions
142 include rules/prof.mk
143 include rules/trace.mk
144 include rules/make-command.mk
146 # -----------------------------------------------------------------------------
147 # Macros for standard targets
149 include rules/all-target.mk
150 include rules/clean-target.mk
152 # -----------------------------------------------------------------------------
155 $(eval $(call clean-target,inplace,,inplace/bin inplace/lib))
157 # -----------------------------------------------------------------------------
158 # Whether to build dependencies or not
160 # When we're just doing 'make clean' or 'make show', then we don't need
161 # to build dependencies.
163 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
164 NO_INCLUDE_DEPS = YES
165 NO_INCLUDE_PKGDATA = YES
167 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
168 NO_INCLUDE_DEPS = YES
169 NO_INCLUDE_PKGDATA = YES
171 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
172 NO_INCLUDE_DEPS = YES
173 # We want package-data.mk for show
176 # -----------------------------------------------------------------------------
179 include rules/way-prelims.mk
181 $(foreach way,$(ALL_WAYS),\
182 $(eval $(call way-prelims,$(way))))
184 # -----------------------------------------------------------------------------
187 include rules/distdir-way-opts.mk
189 # -----------------------------------------------------------------------------
190 # Finding source files and object files
192 include rules/hs-sources.mk
193 include rules/c-sources.mk
194 include rules/includes-sources.mk
195 include rules/hs-objs.mk
196 include rules/c-objs.mk
197 include rules/cmm-objs.mk
199 # -----------------------------------------------------------------------------
202 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
203 # so we don't make any when cleaning.
204 ifneq "$(CLEANING)" "YES"
206 include rules/hs-suffix-rules-srcdir.mk
207 include rules/hs-suffix-rules.mk
208 include rules/hi-rule.mk
210 $(foreach way,$(ALL_WAYS),\
211 $(eval $(call hi-rule,$(way))))
213 include rules/c-suffix-rules.mk
214 include rules/cmm-suffix-rules.mk
218 # -----------------------------------------------------------------------------
219 # Building package-data.mk files from .cabal files
221 include rules/package-config.mk
223 # -----------------------------------------------------------------------------
224 # Building dependencies
226 include rules/build-dependencies.mk
227 include rules/include-dependencies.mk
229 # -----------------------------------------------------------------------------
230 # Build package-data.mk files
232 include rules/build-package-data.mk
234 # -----------------------------------------------------------------------------
235 # Build and install a program
237 include rules/build-prog.mk
238 include rules/shell-wrapper.mk
240 # -----------------------------------------------------------------------------
241 # Build a perl script
243 include rules/build-perl.mk
245 # -----------------------------------------------------------------------------
248 include rules/build-package.mk
249 include rules/build-package-way.mk
250 include rules/haddock.mk
251 include rules/tags-package.mk
252 include rules/extra-packages.mk
254 # -----------------------------------------------------------------------------
255 # Registering hand-written package descriptions (used in libffi and rts)
257 include rules/manual-package-config.mk
259 # -----------------------------------------------------------------------------
262 include rules/docbook.mk
264 # -----------------------------------------------------------------------------
267 include rules/bindist.mk
269 # -----------------------------------------------------------------------------
272 # Don't try to delete directories:
275 # Create build directories on demand. NB. the | below: this indicates
276 # that $(MKDIRHIER) is an order-only dependency, which means that this
277 # rule fires after building mkdirhier, but we won't try to recreate
278 # directories if mkdirhier changes.
282 # -----------------------------------------------------------------------------
285 # --------------------------------
286 # Properties of packages
287 # These lists say "if this package is built, here's a property it has"
288 # They do not say "this package will be built"; see $(PACKAGES_xx) for that
290 # Packages that are built but not installed
291 INTREE_ONLY_PACKAGES := haskeline mtl terminfo utf8-string xhtml
293 DPH_PACKAGES := dph/dph-base dph/dph-prim-interface dph/dph-prim-seq \
294 dph/dph-common dph/dph-prim-par dph/dph-par dph/dph-seq \
297 # Packages that, if present, must be built by the stage2 compiler,
298 # because they use TH and/or annotations, or depend on other stage2
300 STAGE2_PACKAGES := $(DPH_PACKAGES) haskell98 haskell2010 random
301 # Packages that we shouldn't build if we don't have TH (e.g. because
302 # we're building a profiled compiler):
303 TH_PACKAGES := $(DPH_PACKAGES)
305 # Packages that are built by stage0, in addition to stage1. These
306 # packages are dependencies of GHC, that we do not assume the stage0
307 # compiler already has installed (or up-to-date enough).
309 # We assume that the stage0 compiler has a suitable bytestring package,
310 # so we don't have to include it below.
311 STAGE0_PACKAGES = Cabal hpc extensible-exceptions binary bin-package-db
313 # These packages are installed, but are installed hidden
314 # Why install them at all? Because the 'ghc' package depends on them
315 HIDDEN_PACKAGES = binary
317 # $(EXTRA_PACKAGES) is another classification, of packages built but
319 # It is set in rules/extra-package.mk,
320 # by $(call extra-packages) a little further down
324 # --------------------------------
326 # The lists of packages that we *actually* going to build in each stage:
328 # $(STAGE0_PACKAGE) does double duty; it really is the list of packages
329 # we build the bootstrap compiler in stage 0
331 # $(PACKAGES) A list of directories relative to libraries/ containing
332 # packages that will be built by stage1, in dependency
335 # $(PACKAGES_STAGE2) Ditto, for stage2.
338 define addPackageGeneral
339 # args: $1 = PACKAGES variable, $2 = package, $3 = condition
343 ifeq "$$(CLEANING)" "YES"
353 define addPackage # args: $1 = package, $2 = condition
354 ifneq "$(filter $1,$(TH_PACKAGES)) $(GhcProfiled)" "$1 YES"
355 ifeq "$(filter $1,$(STAGE2_PACKAGES))" "$1"
356 $(call addPackageGeneral,PACKAGES_STAGE2,$1,$2)
358 $(call addPackageGeneral,PACKAGES,$1,$2)
363 $(eval $(call addPackage,ghc-prim))
364 ifeq "$(CLEANING)" "YES"
365 $(eval $(call addPackage,integer-gmp))
366 $(eval $(call addPackage,integer-simple))
368 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
370 $(eval $(call addPackage,base))
371 $(eval $(call addPackage,filepath))
372 $(eval $(call addPackage,array))
373 $(eval $(call addPackage,bytestring))
374 $(eval $(call addPackage,containers))
376 $(eval $(call addPackage,Win32,($$(Windows),YES)))
377 $(eval $(call addPackage,unix,($$(Windows),NO)))
379 $(eval $(call addPackage,old-locale))
380 $(eval $(call addPackage,old-time))
381 $(eval $(call addPackage,time))
382 $(eval $(call addPackage,directory))
383 $(eval $(call addPackage,process))
384 $(eval $(call addPackage,random))
385 $(eval $(call addPackage,extensible-exceptions))
386 $(eval $(call addPackage,haskell98))
387 $(eval $(call addPackage,haskell2010))
388 $(eval $(call addPackage,hpc))
389 $(eval $(call addPackage,pretty))
390 $(eval $(call addPackage,template-haskell))
391 $(eval $(call addPackage,Cabal))
392 $(eval $(call addPackage,binary))
393 $(eval $(call addPackage,bin-package-db))
394 $(eval $(call addPackage,mtl))
395 $(eval $(call addPackage,utf8-string))
396 $(eval $(call addPackage,xhtml))
397 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
398 $(eval $(call addPackage,haskeline))
400 $(eval $(call extra-packages))
402 # -------------------------------------------
403 # Dependencies between package-data.mk files
405 # We cannot run ghc-cabal to configure a package until we have
406 # configured and registered all of its dependencies. So the following
407 # hack forces all the configure steps to happen in exactly the following order:
409 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
411 # Ideally we should use the correct dependencies here to allow more
412 # parallelism, but we don't know the dependencies until we've
413 # generated the pacakge-data.mk files.
415 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
416 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
419 ifneq "$(BINDIST)" "YES"
421 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
423 # the GHC package doesn't live in libraries/, so we add its dependency manually:
424 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
425 fixed_pkg_prev:=compiler/stage2/package-data.mk
427 # and continue with PACKAGES_STAGE2, which depend on GHC:
428 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
430 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
431 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
432 # haddock depends on ghc and some libraries, but depending on GHC's
433 # package-data.mk is sufficient, as that in turn depends on all the
435 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
436 utils/ghc-pwd/dist/package-data.mk: compiler/stage2/package-data.mk
437 utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
439 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
440 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
441 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
442 utils/runghc/dist/package-data.mk: compiler/stage2/package-data.mk
444 # add the final two package.conf dependencies: ghc-prim depends on RTS,
445 # and RTS depends on libffi.
446 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
447 rts/package.conf.inplace : libffi/package.conf.inplace
450 # --------------------------------
451 # Misc package-related settings
453 BOOT_PKG_CONSTRAINTS := $(foreach p,$(STAGE0_PACKAGES),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
455 # The actual .a and .so/.dll files: needed for dependencies.
456 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
457 ifeq "$(BuildSharedLibs)" "YES"
458 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
460 BOOT_LIBS = $(foreach lib,$(STAGE0_PACKAGES),$(libraries/$(lib)_dist-boot_v_LIB))
462 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
463 ifeq "$(BuildSharedLibs)" "YES"
464 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
467 # ----------------------------------------
468 # Special magic for the ghc-prim package
470 # We want the ghc-prim package to include the GHC.Prim module when it
471 # is registered, but not when it is built, because GHC.Prim is not a
472 # real source module, it is built-in to GHC. The old build system did
473 # this using Setup.hs, but we can't do that here, so we have a flag to
474 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
475 # remains compatible with the old build system for the time being).
476 # GHC.Prim module in the ghc-prim package with a flag:
478 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
480 # And then we strip it out again before building the package:
481 define libraries/ghc-prim_PACKAGE_MAGIC
482 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
485 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
487 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
488 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
490 # Required so that Haddock documents the primops.
491 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
493 # ----------------------------------------
494 # Special magic for the integer package
496 ifneq "$(CLEANING)" "YES"
497 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
498 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
499 else ifeq "$(INTEGER_LIBRARY)" "integer-simple"
500 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
502 $(error Unknown integer library: $(INTEGER_LIBRARY))
506 # ----------------------------------------------
507 # Checking packages with 'cabal check'
510 ifeq "$(CHECK_PACKAGES)" "YES"
515 # These packages don't pass the Cabal checks because hs-source-dirs
516 # points outside the source directory. This isn't a real problem in
517 # these cases, so we just skip checking them.
518 # NB. these must come before we include the ghc.mk files below, because
519 # they disable the relevant rules.
520 CHECKED_libraries/dph/dph-seq = YES
521 CHECKED_libraries/dph/dph-par = YES
522 # In compiler's case, include-dirs points outside of the source tree
523 CHECKED_compiler = YES
525 # -----------------------------------------------------------------------------
526 # Include build instructions from all subdirs
528 ifneq "$(BINDIST)" "YES"
540 ifneq "$(GhcUnregisterised)" "YES"
546 ifneq "$(BINDIST)" "YES"
560 ifneq "$(BINDIST)" "YES"
566 ifneq "$(CLEANING)" "YES"
568 $(patsubst %, libraries/%, $(PACKAGES))
571 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
572 BUILD_DIRS += libraries/integer-gmp/gmp
573 else ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
574 BUILD_DIRS += libraries/integer-gmp/gmp
590 ifeq "$(Windows)" "YES"
595 ifneq "$(BINDIST)" "YES"
597 utils/mkUserGuidePart
600 BUILD_DIRS += utils/count_lines
601 BUILD_DIRS += utils/compare_sizes
603 ifneq "$(CLEANING)" "YES"
604 # After compiler/, because these packages depend on it
606 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
609 # ----------------------------------------------
610 # Actually include all the sub-ghc.mk's
612 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
614 # A useful pseudo-target (must be after the include above, because it needs
615 # the value of things like $(libraries/base_dist-install_v_LIB).
617 stage1_libs : $(ALL_STAGE1_LIBS)
619 # ----------------------------------------------
620 # Per-package compiler flags
622 # If you want to add per-package compiler flags, this
623 # is the place to do it. Do it like this for package <pkg>
625 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
626 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
628 # Add $(GhcLibHcOpts) to all package builds
629 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
631 # Add $(GhcBootLibHcOpts) to all stage0 package builds
632 $(foreach pkg,$(STAGE0_PACKAGES),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
634 # -----------------------------------------------
635 # Haddock-related bits
637 # Don't run Haddock for the package that will not be installed
638 $(foreach p,$(INTREE_ONLY_PACKAGES),$(eval libraries/$p_dist-install_DO_HADDOCK = NO))
639 # We don't haddock the bootstrapping libraries
640 $(foreach p,$(STAGE0_PACKAGES),$(eval libraries/$p_dist-boot_DO_HADDOCK = NO))
642 # Build the Haddock contents and index
643 ifeq "$(HADDOCK_DOCS)" "YES"
644 libraries/index.html: inplace/bin/haddock$(exeext) $(ALL_HADDOCK_FILES)
645 cd libraries && sh gen_contents_index --inplace
647 $(eval $(call all-target,library_doc_index,libraries/index.html))
649 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
650 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
651 libraries/haddock*.js libraries/index*.html libraries/*.gif
654 # -----------------------------------------------------------------------------
655 # Bootstrapping libraries
657 # We need to build a few libraries with the installed GHC, since GHC itself
658 # and some of the tools depend on them:
660 ifneq "$(BINDIST)" "YES"
662 ifneq "$(BOOTSTRAPPING_CONF)" ""
663 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
664 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
668 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
670 # These three libraries do not depend on each other, so we can build
673 $(eval $(call build-package,libraries/hpc,dist-boot,0))
674 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
675 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
676 $(eval $(call build-package,libraries/binary,dist-boot,0))
677 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
679 # register the boot packages in strict sequence, because running
680 # multiple ghc-pkgs in parallel doesn't work (registrations may get
683 $(foreach pkg,$(STAGE0_PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
685 compiler/stage1/package-data.mk : $(fixed_pkg_prev)
687 # Make sure we have all the GHCi libs by the time we've built
688 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
689 # GHCI libs, and we don't have a better way to express that dependency.
691 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
692 $(compiler_stage2_GHCI_LIB)
694 ifeq "$(UseArchivesForGhci)" "NO"
695 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
698 ifeq "$(UseArchivesForGhci)" "YES"
704 # Deps for TH uses in libraries
705 $(foreach way, $(GhcLibWays),$(eval \
706 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
707 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
711 # -----------------------------------------------------------------------------
712 # Creating a local mingw copy on Windows
714 ifeq "$(Windows)" "YES"
716 install : install_mingw
717 .PHONY: install_mingw
718 install_mingw : $(INPLACE_MINGW)
719 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
721 install : install_perl
723 install_perl : $(INPLACE_PERL)
724 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
728 ifneq "$(BINDIST)" "YES"
729 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
730 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
733 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
734 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
736 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
744 # -----------------------------------------------------------------------------
747 install: install_packages install_libs install_libexecs install_headers \
748 install_libexec_scripts install_bins install_topdirs
749 ifeq "$(HADDOCK_DOCS)" "YES"
750 install: install_docs
753 install_bins: $(INSTALL_BINS)
754 $(call INSTALL_DIR,"$(DESTDIR)$(bindir)")
755 for i in $(INSTALL_BINS); do \
756 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(bindir)") ; \
759 install_libs: $(INSTALL_LIBS)
760 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibdir)")
761 for i in $(INSTALL_LIBS); do \
764 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)"); \
765 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
767 $(call INSTALL_DATA,-s $(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)") ;; \
769 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)") ;; \
771 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)");; \
773 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)"); \
777 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
778 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
781 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)")
782 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
783 $(call INSTALL_SCRIPT,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)"); \
787 install_libexecs: $(INSTALL_LIBEXECS)
788 ifeq "$(INSTALL_LIBEXECS)" ""
791 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)")
792 for i in $(INSTALL_LIBEXECS); do \
793 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)"); \
795 # We rename ghc-stage2, so that the right program name is used in error
797 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
800 install_topdirs: $(INSTALL_TOPDIRS)
801 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
802 for i in $(INSTALL_TOPDIRS); do \
803 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(topdir)"); \
806 install_headers: $(INSTALL_HEADERS)
807 $(call INSTALL_DIR,"$(DESTDIR)$(ghcheaderdir)")
808 for i in $(INSTALL_HEADERS); do \
809 $(call INSTALL_HEADER,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghcheaderdir)"); \
812 install_docs: $(INSTALL_DOCS)
813 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)")
814 ifneq "$(INSTALL_DOCS)" ""
815 for i in $(INSTALL_DOCS); do \
816 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)"); \
819 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html")
820 $(call INSTALL_DOC,$(INSTALL_OPTS),docs/index.html,"$(DESTDIR)$(docdir)/html")
821 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
822 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/libraries")
823 for i in $(INSTALL_LIBRARY_DOCS); do \
824 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)/html/libraries/"); \
826 $(call INSTALL_DATA,$(INSTALL_OPTS),libraries/prologue.txt,"$(DESTDIR)$(docdir)/html/libraries/")
827 $(call INSTALL_SCRIPT,$(INSTALL_OPTS),libraries/gen_contents_index,"$(DESTDIR)$(docdir)/html/libraries/")
829 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
830 for i in $(INSTALL_HTML_DOC_DIRS); do \
831 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
832 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i/*,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
836 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
838 # Install packages in the right order, so that ghc-pkg doesn't complain.
839 # Also, install ghc-pkg first.
840 ifeq "$(Windows)" "NO"
841 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
842 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
844 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
845 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
848 INSTALLED_PKG_DIRS := $(addprefix libraries/,$(PACKAGES)) \
850 $(addprefix libraries/,$(PACKAGES_STAGE2))
851 ifeq "$(InstallExtraPackages)" "NO"
852 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(EXTRA_PACKAGES)),\
853 $(INSTALLED_PKG_DIRS))
855 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(INTREE_ONLY_PACKAGES)),\
856 $(INSTALLED_PKG_DIRS))
858 # Set the INSTALL_DISTDIR_p for each package; compiler is special
859 $(foreach p,$(filter-out compiler,$(INSTALLED_PKG_DIRS)),\
860 $(eval INSTALL_DISTDIR_$p = dist-install))
861 INSTALL_DISTDIR_compiler = stage2
863 # Now we can do the installation
864 install_packages: install_libexecs
865 install_packages: libffi/package.conf.install rts/package.conf.install
866 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
867 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
868 $(call INSTALL_DIR,"$(INSTALLED_PACKAGE_CONF)")
869 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
870 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
871 $(foreach p, $(INSTALLED_PKG_DIRS), \
872 $(call make-command, \
873 "$(GHC_CABAL_INPLACE)" install \
874 "$(INSTALLED_GHC_REAL)" \
875 "$(INSTALLED_GHC_PKG_REAL)" \
877 "$(DESTDIR)$(topdir)" \
878 $p $(INSTALL_DISTDIR_$p) \
882 '$(docdir)/html/libraries' \
883 $(RelocatableBuild)))
884 $(foreach p, $(HIDDEN_PACKAGES), \
885 $(call make-command, \
886 "$(INSTALLED_GHC_PKG_REAL)" \
887 --global-conf "$(INSTALLED_PACKAGE_CONF)" hide $p))
889 # -----------------------------------------------------------------------------
890 # Binary distributions
892 ifneq "$(CLEANING)" "YES"
893 # This rule seems to hold some files open on Windows which prevents
894 # cleaning, perhaps due to the $(wildcard).
896 $(eval $(call bindist,.,\
900 configure config.sub config.guess install-sh \
905 $(INPLACE_BIN)/mkdirhier \
906 utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
907 utils/ghc-pwd/dist/build/tmp/ghc-pwd \
908 $(BINDIST_WRAPPERS) \
909 $(BINDIST_PERL_SOURCES) \
913 $(includes_H_CONFIG) \
914 $(includes_H_PLATFORM) \
915 $(includes_H_FILES) \
916 includes/ghcconfig.h \
917 includes/rts/Config.h \
919 $(INSTALL_LIBEXECS) \
920 $(INSTALL_LIBEXEC_SCRIPTS) \
923 $(INSTALL_MANPAGES) \
925 $(INSTALL_LIBRARY_DOCS) \
926 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
928 compiler/stage2/doc \
929 $(wildcard libraries/*/dist-install/doc/) \
930 $(wildcard libraries/*/*/dist-install/doc/) \
931 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
932 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
936 libraries/gen_contents_index \
937 libraries/prologue.txt \
938 $(wildcard libraries/dph/LICENSE \
939 libraries/dph/ghc-packages \
940 libraries/dph/ghc-packages2 \
941 libraries/dph/ghc-stage2-package) \
944 # mk/project.mk gets an absolute path, so we manually include it in
945 # the bindist with a relative path
947 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
949 unix-binary-dist-prep:
950 "$(RM)" $(RM_OPTS_REC) bindistprep/
951 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
952 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
953 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
954 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
955 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
956 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
957 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
958 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
959 echo "GHC_CABAL_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal" >> $(BIN_DIST_MK)
960 cd $(BIN_DIST_PREP_DIR) && autoreconf
961 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
962 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
963 # tree then we want to include the real file, not a symlink to it
964 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
966 windows-binary-dist-prep:
967 "$(RM)" $(RM_OPTS_REC) bindistprep/
968 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
969 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
972 ifeq "$(ISCC_CMD)" ""
973 @echo No ISCC_CMD, so not making installer
975 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
978 # tryTimes tries to run its third argument multiple times, until it
979 # succeeds. Don't call it directly; call try10Times instead.
980 # The first and second argument to tryTimes are lists of values.
981 # The length of the first argument is the number of times we have
982 # already tried. The length of the second argument is the number more
984 tryTimes = $(if $2, \
985 { echo 'Try $(words x $1): $3' ; $3 ; } || \
986 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
989 # Try to run the argument 10 times. If all 10 fail, fail.
990 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
992 .PHONY: publish-binary-dist
994 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
995 ifeq "$(mingw32_TARGET_OS)" "1"
996 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
999 ifeq "$(mingw32_TARGET_OS)" "1"
1000 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/doc
1002 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/share/doc/ghc
1005 .PHONY: publish-docs
1007 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1009 # -----------------------------------------------------------------------------
1010 # Source distributions
1018 # A source dist is built from a complete build tree, because we
1019 # require some extra files not contained in a darcs checkout: the
1020 # output from Happy and Alex, for example.
1022 # The steps performed by 'make dist' are as follows:
1023 # - create a complete link-tree of the current build tree in /tmp
1024 # - run 'make distclean' on that tree
1025 # - remove a bunch of other files that we know shouldn't be in the dist
1026 # - tar up first the extralibs package, then the main source package
1029 # Directory in which we're going to build the src dist
1031 SRC_DIST_NAME=ghc-$(ProjectVersion)
1032 SRC_DIST_DIR=$(TOP)/$(SRC_DIST_NAME)
1035 # Files to include in source distributions
1037 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1039 configure.ac config.guess config.sub configure \
1040 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1041 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1042 boot boot-pkgs packages ghc.mk
1044 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1047 echo $(ProjectVersion) >VERSION
1052 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1053 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1054 # "stage2" is the dist dir.
1056 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1057 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1062 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1063 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1064 mkdir $(SRC_DIST_DIR)
1065 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1066 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1067 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1068 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1069 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1070 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1071 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1072 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1073 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1074 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1075 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1076 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1077 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1078 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1079 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1080 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1081 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1085 "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1087 sdist-manifest : $(SRC_DIST_TARBALL)
1088 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1090 # Upload the distribution(s)
1091 # Retrying is to work around buggy firewalls that corrupt large file transfers
1093 ifneq "$(PublishLocation)" ""
1095 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1098 ifeq "$(BootingFromHc)" "YES"
1099 # In a normal build we use GHC to compile C files (see
1100 # rules/c-suffix-rules.mk), which passes a number of its own options
1101 # to the C compiler. So when bootstrapping we have to provide these
1102 # flags explicitly to C compilations.
1103 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1104 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1105 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1108 # -----------------------------------------------------------------------------
1109 # sdisting libraries
1111 # Use manually, with e.g.:
1112 # make sdist_directory
1115 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1117 # -----------------------------------------------------------------------------
1122 CLEAN_FILES += libraries/bootstrapping.conf
1123 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1124 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1126 clean : clean_files clean_libraries
1130 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1132 .PHONY: clean_libraries
1133 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1134 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(STAGE0_PACKAGES))
1137 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1138 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1140 # We have to define a clean target for each library manually, because the
1141 # libraries/*/ghc.mk files are not included when we're cleaning.
1142 ifeq "$(CLEANING)" "YES"
1143 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1144 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1147 clean : clean_bindistprep
1148 .PHONY: clean_bindistprep
1150 "$(RM)" $(RM_OPTS_REC) bindistprep/
1153 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1154 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1155 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1156 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1157 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1158 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1159 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1160 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1161 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1162 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1163 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1164 "$(RM)" $(RM_OPTS_REC) utils/ghc-pwd/dist
1165 "$(RM)" $(RM_OPTS_REC) inplace
1167 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1168 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1169 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1170 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1172 maintainer-clean : distclean
1173 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1174 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1175 "$(RM)" $(RM_OPTS) ghc.spec
1176 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1177 $(PACKAGES) $(PACKAGES_STAGE2))
1178 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1179 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1180 $(PACKAGES) $(PACKAGES_STAGE2))
1181 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1182 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1183 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1184 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1185 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1187 .PHONY: all_libraries
1189 .PHONY: bootstrapping-files
1190 bootstrapping-files: $(OTHER_LIBS)
1191 bootstrapping-files: includes/ghcautoconf.h
1192 bootstrapping-files: includes/DerivedConstants.h
1193 bootstrapping-files: includes/GHCConstants.h
1197 # -----------------------------------------------------------------------------
1198 # Numbered phase targets
1200 .PHONY: phase_0_builds
1201 phase_0_builds: $(utils/hsc2hs_dist_depfile_haskell)
1202 phase_0_builds: $(utils/hsc2hs_dist_depfile_c_asm)
1203 phase_0_builds: $(utils/genprimopcode_dist_depfile_haskell)
1204 phase_0_builds: $(utils/genprimopcode_dist_depfile_c_asm)
1206 .PHONY: phase_1_builds
1207 phase_1_builds: $(PACKAGE_DATA_MKS)