1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * remove old Makefiles, add new stubs for building in subdirs
17 # * docs/docbook-cheat-sheet/Makefile
18 # * docs/ext-core/Makefile
20 # * docs/storage-mgmt/Makefile
22 # * rts/dotnet/Makefile
24 # * add Makefiles for the rest of the utils/ programs that aren't built
25 # by default (need to exclude them from 'make all' too)
29 # * per-source-file dependencies instead of one .depend file?
30 # * eliminate undefined variables, and use --warn-undefined-variables?
31 # * put outputs from different ways in different subdirs of distdir/build,
32 # then we don't have to use -osuf/-hisuf. We would have to install
33 # them in different places too, so we'd need ghc-pkg support for packages
35 # * make PACKAGES generated by './configure' or './boot'?
36 # * we should use a directory of package.conf files rather than a single
37 # file for the inplace package database, so that we can express
38 # dependencies more accurately. Otherwise it's possible to get into
39 # a state where the package database is out of date, and the build
40 # system doesn't know.
42 # Approximate build order.
44 # The actual build order is defined by dependencies, and the phase
45 # ordering used to ensure correct ordering of makefile-generation; see
46 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
48 # * With bootstrapping compiler:
49 # o Build utils/ghc-cabal
50 # o Build utils/ghc-pkg
51 # o Build utils/hsc2hs
53 # o configure, generate package-data.mk and inplace-pkg-info
54 # o register each package into inplace/lib/package.conf
56 # * With bootstrapping compiler:
57 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
58 # o Build compiler (stage 1)
62 # o Build utils/* (except haddock)
63 # o Build compiler (stage 2)
65 # o Build utils/haddock
66 # o Build compiler (stage 3) (optional)
71 .PHONY: default all haddock
73 # We need second expansion for the way we handle directories, so that
75 # expands to the directory of a rule that uses a % pattern.
80 # Catch make if it runs away into an infinite loop
81 ifeq "$(MAKE_RESTARTS)" ""
82 else ifeq "$(MAKE_RESTARTS)" "1"
83 else ifeq "$(MAKE_RESTARTS)" "2"
85 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
88 ifneq "$(CLEANING)" "YES"
92 # -----------------------------------------------------------------------------
96 space=$(nothing) $(nothing)
99 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
100 # by default, because that disables all the implicit rules, but there doesn't
101 # seem to be a good way to do that. This turns off all the old-style suffix
102 # rules, which does half the job and speeds up make quite a bit:
105 # -----------------------------------------------------------------------------
108 # to see the effective value used for a Makefile variable, do
109 # make show VALUE=MY_VALUE
113 @echo '$(VALUE)="$($(VALUE))"'
115 # -----------------------------------------------------------------------------
116 # Include subsidiary build-system bits
120 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
122 ifeq "$(ProjectVersion)" ""
123 $(error Please run ./configure first)
129 # (Optional) build-specific configuration
130 include mk/custom-settings.mk
132 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
133 ifeq "$(GhcLibWays)" ""
134 $(error $$(GhcLibWays) is empty, it must contain at least one way)
138 # -----------------------------------------------------------------------------
139 # Utility definitions
141 include rules/trace.mk
142 include rules/make-command.mk
144 # -----------------------------------------------------------------------------
145 # Macros for standard targets
147 include rules/all-target.mk
148 include rules/clean-target.mk
150 # -----------------------------------------------------------------------------
153 $(eval $(call clean-target,inplace,,inplace/bin inplace/lib))
155 # -----------------------------------------------------------------------------
156 # Whether to build dependencies or not
158 # When we're just doing 'make clean' or 'make show', then we don't need
159 # to build dependencies.
161 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
162 NO_INCLUDE_DEPS = YES
163 NO_INCLUDE_PKGDATA = YES
165 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
166 NO_INCLUDE_DEPS = YES
167 NO_INCLUDE_PKGDATA = YES
169 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
170 NO_INCLUDE_DEPS = YES
171 # We want package-data.mk for show
174 # -----------------------------------------------------------------------------
177 include rules/way-prelims.mk
179 $(foreach way,$(ALL_WAYS),\
180 $(eval $(call way-prelims,$(way))))
182 # -----------------------------------------------------------------------------
185 include rules/distdir-way-opts.mk
187 # -----------------------------------------------------------------------------
188 # Finding source files and object files
190 include rules/hs-sources.mk
191 include rules/c-sources.mk
192 include rules/includes-sources.mk
193 include rules/hs-objs.mk
194 include rules/c-objs.mk
195 include rules/cmm-objs.mk
197 # -----------------------------------------------------------------------------
200 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
201 # so we don't make any when cleaning.
202 ifneq "$(CLEANING)" "YES"
204 include rules/hs-suffix-rules-srcdir.mk
205 include rules/hs-suffix-rules.mk
206 include rules/hi-rule.mk
208 $(foreach way,$(ALL_WAYS),\
209 $(eval $(call hi-rule,$(way))))
211 include rules/c-suffix-rules.mk
212 include rules/cmm-suffix-rules.mk
216 # -----------------------------------------------------------------------------
217 # Building package-data.mk files from .cabal files
219 include rules/package-config.mk
221 # -----------------------------------------------------------------------------
222 # Building dependencies
224 include rules/build-dependencies.mk
226 # -----------------------------------------------------------------------------
227 # Build package-data.mk files
229 include rules/build-package-data.mk
231 # -----------------------------------------------------------------------------
232 # Build and install a program
234 include rules/build-prog.mk
235 include rules/shell-wrapper.mk
237 # -----------------------------------------------------------------------------
238 # Build a perl script
240 include rules/build-perl.mk
242 # -----------------------------------------------------------------------------
245 include rules/build-package.mk
246 include rules/build-package-way.mk
247 include rules/haddock.mk
248 include rules/tags-package.mk
249 include rules/extra-packages.mk
251 # -----------------------------------------------------------------------------
252 # Registering hand-written package descriptions (used in libffi and rts)
254 include rules/manual-package-config.mk
256 # -----------------------------------------------------------------------------
259 include rules/docbook.mk
261 # -----------------------------------------------------------------------------
264 include rules/bindist.mk
266 # -----------------------------------------------------------------------------
269 # Don't try to delete directories:
272 # Create build directories on demand. NB. the | below: this indicates
273 # that $(MKDIRHIER) is an order-only dependency, which means that this
274 # rule fires after building mkdirhier, but we won't try to recreate
275 # directories if mkdirhier changes.
279 # -----------------------------------------------------------------------------
282 # --------------------------------
283 # Properties of packages
284 # These lists say "if this package is built, here's a property it has"
285 # They do not say "this package will be built"; see $(PACKAGES_xx) for that
287 # Packages that are built but not installed
288 INTREE_ONLY_PACKAGES := haskeline mtl terminfo utf8-string xhtml
290 DPH_PACKAGES := dph/dph-base dph/dph-prim-interface dph/dph-prim-seq \
291 dph/dph-common dph/dph-prim-par dph/dph-par dph/dph-seq \
294 # Packages that, if present, must be built by the stage2 compiler,
295 # because they use TH and/or annotations, or depend on other stage2
297 STAGE2_PACKAGES := $(DPH_PACKAGES) haskell98 haskell2010 random
298 # Packages that we shouldn't build if we don't have TH (e.g. because
299 # we're building a profiled compiler):
300 TH_PACKAGES := $(DPH_PACKAGES)
302 # Packages that are built by stage0, in addition to stage1. These
303 # packages are dependencies of GHC, that we do not assume the stage0
304 # compiler already has installed (or up-to-date enough).
306 # We assume that the stage0 compiler has a suitable bytestring package,
307 # so we don't have to include it below.
308 STAGE0_PACKAGES = Cabal hpc extensible-exceptions binary bin-package-db
310 # These packages are installed, but are installed hidden
311 # Why install them at all? Because the 'ghc' package depends on them
312 HIDDEN_PACKAGES = binary
314 # $(EXTRA_PACKAGES) is another classification, of packages built but
316 # It is set in rules/extra-package.mk,
317 # by $(call extra-packages) a little further down
321 # --------------------------------
323 # The lists of packages that we *actually* going to build in each stage:
325 # $(STAGE0_PACKAGE) does double duty; it really is the list of packages
326 # we build the bootstrap compiler in stage 0
328 # $(PACKAGES) A list of directories relative to libraries/ containing
329 # packages that will be built by stage1, in dependency
332 # $(PACKAGES_STAGE2) Ditto, for stage2.
335 define addPackageGeneral
336 # args: $1 = PACKAGES variable, $2 = package, $3 = condition
340 ifeq "$$(CLEANING)" "YES"
350 define addPackage # args: $1 = package, $2 = condition
351 ifneq "$(filter $1,$(TH_PACKAGES)) $(GhcProfiled)" "$1 YES"
352 ifeq "$(filter $1,$(STAGE2_PACKAGES))" "$1"
353 $(call addPackageGeneral,PACKAGES_STAGE2,$1,$2)
355 $(call addPackageGeneral,PACKAGES,$1,$2)
360 $(eval $(call addPackage,ghc-prim))
361 ifeq "$(CLEANING)" "YES"
362 $(eval $(call addPackage,integer-gmp))
363 $(eval $(call addPackage,integer-simple))
365 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
367 $(eval $(call addPackage,base))
368 $(eval $(call addPackage,filepath))
369 $(eval $(call addPackage,array))
370 $(eval $(call addPackage,bytestring))
371 $(eval $(call addPackage,containers))
373 $(eval $(call addPackage,Win32,($$(Windows),YES)))
374 $(eval $(call addPackage,unix,($$(Windows),NO)))
376 $(eval $(call addPackage,old-locale))
377 $(eval $(call addPackage,old-time))
378 $(eval $(call addPackage,time))
379 $(eval $(call addPackage,directory))
380 $(eval $(call addPackage,process))
381 $(eval $(call addPackage,random))
382 $(eval $(call addPackage,extensible-exceptions))
383 $(eval $(call addPackage,haskell98))
384 $(eval $(call addPackage,haskell2010))
385 $(eval $(call addPackage,hpc))
386 $(eval $(call addPackage,pretty))
387 $(eval $(call addPackage,template-haskell))
388 $(eval $(call addPackage,Cabal))
389 $(eval $(call addPackage,binary))
390 $(eval $(call addPackage,bin-package-db))
391 $(eval $(call addPackage,mtl))
392 $(eval $(call addPackage,utf8-string))
393 $(eval $(call addPackage,xhtml))
394 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
395 $(eval $(call addPackage,haskeline))
397 $(eval $(call extra-packages))
399 # -------------------------------------------
400 # Dependencies between package-data.mk files
402 # We cannot run ghc-cabal to configure a package until we have
403 # configured and registered all of its dependencies. So the following
404 # hack forces all the configure steps to happen in exactly the following order:
406 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
408 # Ideally we should use the correct dependencies here to allow more
409 # parallelism, but we don't know the dependencies until we've
410 # generated the pacakge-data.mk files.
412 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
413 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
416 ifneq "$(BINDIST)" "YES"
418 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
420 # the GHC package doesn't live in libraries/, so we add its dependency manually:
421 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
422 fixed_pkg_prev:=compiler/stage2/package-data.mk
424 # and continue with PACKAGES_STAGE2, which depend on GHC:
425 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
427 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
428 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
429 # haddock depends on ghc and some libraries, but depending on GHC's
430 # package-data.mk is sufficient, as that in turn depends on all the
432 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
433 utils/ghc-pwd/dist/package-data.mk: compiler/stage2/package-data.mk
434 utils/ghc-cabal/dist-install/package-data.mk: compiler/stage2/package-data.mk
436 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
437 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
438 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
439 utils/runghc/dist/package-data.mk: compiler/stage2/package-data.mk
441 # add the final two package.conf dependencies: ghc-prim depends on RTS,
442 # and RTS depends on libffi.
443 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
444 rts/package.conf.inplace : libffi/package.conf.inplace
447 # --------------------------------
448 # Misc package-related settings
450 BOOT_PKG_CONSTRAINTS := $(foreach p,$(STAGE0_PACKAGES),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
452 # The actual .a and .so/.dll files: needed for dependencies.
453 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
454 ifeq "$(BuildSharedLibs)" "YES"
455 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
457 BOOT_LIBS = $(foreach lib,$(STAGE0_PACKAGES),$(libraries/$(lib)_dist-boot_v_LIB))
459 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
460 ifeq "$(BuildSharedLibs)" "YES"
461 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
464 # ----------------------------------------
465 # Special magic for the ghc-prim package
467 # We want the ghc-prim package to include the GHC.Prim module when it
468 # is registered, but not when it is built, because GHC.Prim is not a
469 # real source module, it is built-in to GHC. The old build system did
470 # this using Setup.hs, but we can't do that here, so we have a flag to
471 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
472 # remains compatible with the old build system for the time being).
473 # GHC.Prim module in the ghc-prim package with a flag:
475 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
477 # And then we strip it out again before building the package:
478 define libraries/ghc-prim_PACKAGE_MAGIC
479 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
482 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
484 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
485 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
487 # Required so that Haddock documents the primops.
488 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
490 # ----------------------------------------
491 # Special magic for the integer package
493 ifneq "$(CLEANING)" "YES"
494 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
495 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
497 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
498 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
500 $(error Unknown integer library: $(INTEGER_LIBRARY))
505 # ----------------------------------------------
506 # Checking packages with 'cabal check'
509 ifeq "$(CHECK_PACKAGES)" "YES"
514 # These packages don't pass the Cabal checks because hs-source-dirs
515 # points outside the source directory. This isn't a real problem in
516 # these cases, so we just skip checking them.
517 # NB. these must come before we include the ghc.mk files below, because
518 # they disable the relevant rules.
519 CHECKED_libraries/dph/dph-seq = YES
520 CHECKED_libraries/dph/dph-par = YES
521 # In compiler's case, include-dirs points outside of the source tree
522 CHECKED_compiler = YES
524 # -----------------------------------------------------------------------------
525 # Include build instructions from all subdirs
527 ifneq "$(BINDIST)" "YES"
539 ifneq "$(GhcUnregisterised)" "YES"
545 ifneq "$(BINDIST)" "YES"
559 ifneq "$(BINDIST)" "YES"
565 ifneq "$(CLEANING)" "YES"
567 $(patsubst %, libraries/%, $(PACKAGES))
570 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
571 BUILD_DIRS += libraries/integer-gmp/gmp
587 ifeq "$(Windows)" "YES"
592 ifneq "$(BINDIST)" "YES"
594 utils/mkUserGuidePart
597 BUILD_DIRS += utils/count_lines
598 BUILD_DIRS += utils/compare_sizes
600 ifneq "$(CLEANING)" "YES"
601 # After compiler/, because these packages depend on it
603 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
606 # -----------------------------------------------------------------------------
609 phase_0_or_later = YES
610 ifeq "$(findstring $(phase),0)" ""
612 phase_1_or_later = YES
614 ifeq "$(findstring $(phase),0 1)" ""
616 phase_2_or_later = YES
618 ifeq "$(findstring $(phase),0 1 2)" ""
620 phase_3_or_later = YES
622 ifeq "$(findstring $(phase),0 1 2 3)" ""
626 includes_dist-derivedconstants_CONFIGURE_PHASE = 0
627 includes_dist-ghcconstants_CONFIGURE_PHASE = 0
629 # We do these first, as making the sources for some later
630 # packages needs them, and we need the sources before we can
631 # work out dependencies
632 utils/hsc2hs_dist_CONFIGURE_PHASE = 0
633 utils/unlit_dist_CONFIGURE_PHASE = 0
634 utils/genprimopcode_dist_CONFIGURE_PHASE = 0
637 $(foreach lib,$(STAGE0_PACKAGES),$(eval \
638 libraries/$(lib)_dist-boot_CONFIGURE_PHASE = 1))
639 compiler_stage1_CONFIGURE_PHASE = 1
640 ghc_stage1_CONFIGURE_PHASE = 1
642 # In phase 2, the phase 1 things actually get built
644 # Finally, the stage1 compiler is used to make the dependencies for
645 # everything else, so we can now build the rest.
646 compiler_stage2_CONFIGURE_PHASE = 3
647 ghc_stage2_CONFIGURE_PHASE = 3
649 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
650 libraries/$(lib)_dist-install_CONFIGURE_PHASE = 3))
652 utils/hp2ps_dist_CONFIGURE_PHASE = 3
653 utils/genapply_dist_CONFIGURE_PHASE = 3
654 utils/haddock_dist_CONFIGURE_PHASE = 3
655 utils/hsc2hs_dist-install_CONFIGURE_PHASE = 3
656 utils/ghc-pkg_dist-install_CONFIGURE_PHASE = 3
657 utils/hpc_dist_CONFIGURE_PHASE = 3
658 utils/runghc_dist_CONFIGURE_PHASE = 3
659 utils/ghctags_dist_CONFIGURE_PHASE = 3
660 utils/ghc-pwd_dist_CONFIGURE_PHASE = 3
661 utils/ghc-cabal_dist-install_CONFIGURE_PHASE = 3
662 utils/mkUserGuidePart_dist_CONFIGURE_PHASE = 3
663 utils/compare_sizes_dist_CONFIGURE_PHASE = 3
665 # ----------------------------------------------
666 # Actually include all the sub-ghc.mk's
668 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
670 # A useful pseudo-target (must be after the include above, because it needs
671 # the value of things like $(libraries/base_dist-install_v_LIB).
673 stage1_libs : $(ALL_STAGE1_LIBS)
675 # ----------------------------------------------
676 # Per-package compiler flags
678 # If you want to add per-package compiler flags, this
679 # is the place to do it. Do it like this for package <pkg>
681 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
682 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
684 # Add $(GhcLibHcOpts) to all package builds
685 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
687 # Add $(GhcBootLibHcOpts) to all stage0 package builds
688 $(foreach pkg,$(STAGE0_PACKAGES),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
690 # -----------------------------------------------
691 # Haddock-related bits
693 # Don't run Haddock for the package that will not be installed
694 $(foreach p,$(INTREE_ONLY_PACKAGES),$(eval libraries/$p_dist-install_DO_HADDOCK = NO))
695 # We don't haddock the bootstrapping libraries
696 $(foreach p,$(STAGE0_PACKAGES),$(eval libraries/$p_dist-boot_DO_HADDOCK = NO))
698 # Build the Haddock contents and index
699 ifeq "$(HADDOCK_DOCS)" "YES"
700 libraries/index.html: inplace/bin/haddock $(ALL_HADDOCK_FILES)
701 cd libraries && sh gen_contents_index --inplace
703 $(eval $(call all-target,library_doc_index,libraries/index.html))
705 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
706 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
707 libraries/haddock*.js libraries/index*.html libraries/*.gif
710 # -----------------------------------------------------------------------------
711 # Bootstrapping libraries
713 # We need to build a few libraries with the installed GHC, since GHC itself
714 # and some of the tools depend on them:
716 ifneq "$(BINDIST)" "YES"
718 ifneq "$(BOOTSTRAPPING_CONF)" ""
719 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
720 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
724 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
726 # These three libraries do not depend on each other, so we can build
729 $(eval $(call build-package,libraries/hpc,dist-boot,0))
730 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
731 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
732 $(eval $(call build-package,libraries/binary,dist-boot,0))
733 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
735 # register the boot packages in strict sequence, because running
736 # multiple ghc-pkgs in parallel doesn't work (registrations may get
739 $(foreach pkg,$(STAGE0_PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
741 compiler/stage1/package-data.mk : \
742 libraries/Cabal/dist-boot/package-data.mk \
743 libraries/hpc/dist-boot/package-data.mk \
744 libraries/extensible-exceptions/dist-boot/package-data.mk \
745 libraries/bin-package-db/dist-boot/package-data.mk
747 # Make sure we have all the GHCi libs by the time we've built
748 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
749 # GHCI libs, and we don't have a better way to express that dependency.
751 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
752 $(compiler_stage2_GHCI_LIB)
754 ifeq "$(UseArchivesForGhci)" "NO"
755 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
758 ifeq "$(UseArchivesForGhci)" "YES"
764 # Deps for TH uses in libraries
765 $(foreach way, $(GhcLibWays),$(eval \
766 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
767 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
771 # -----------------------------------------------------------------------------
772 # Creating a local mingw copy on Windows
774 ifeq "$(Windows)" "YES"
776 install : install_mingw
777 .PHONY: install_mingw
778 install_mingw : $(INPLACE_MINGW)
779 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
781 install : install_perl
783 install_perl : $(INPLACE_PERL)
784 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
788 ifneq "$(BINDIST)" "YES"
789 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
790 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
793 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
794 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
796 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
804 # -----------------------------------------------------------------------------
807 install: install_packages install_libs install_libexecs install_headers \
808 install_libexec_scripts install_bins install_topdirs
809 ifeq "$(HADDOCK_DOCS)" "YES"
810 install: install_docs
813 install_bins: $(INSTALL_BINS)
814 $(call INSTALL_DIR,"$(DESTDIR)$(bindir)")
815 for i in $(INSTALL_BINS); do \
816 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(bindir)") ; \
819 install_libs: $(INSTALL_LIBS)
820 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibdir)")
821 for i in $(INSTALL_LIBS); do \
824 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)"); \
825 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
827 $(call INSTALL_DATA,-s $(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)") ;; \
829 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)") ;; \
831 $(call INSTALL_SHLIB,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)");; \
833 $(call INSTALL_DATA,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibdir)"); \
837 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
838 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
841 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)")
842 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
843 $(call INSTALL_SCRIPT,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)"); \
847 install_libexecs: $(INSTALL_LIBEXECS)
848 ifeq "$(INSTALL_LIBEXECS)" ""
851 $(call INSTALL_DIR,"$(DESTDIR)$(ghclibexecdir)")
852 for i in $(INSTALL_LIBEXECS); do \
853 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(ghclibexecdir)"); \
855 # We rename ghc-stage2, so that the right program name is used in error
857 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
860 install_topdirs: $(INSTALL_TOPDIRS)
861 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
862 for i in $(INSTALL_TOPDIRS); do \
863 $(call INSTALL_PROGRAM,$(INSTALL_BIN_OPTS),$$i,"$(DESTDIR)$(topdir)"); \
866 install_headers: $(INSTALL_HEADERS)
867 $(call INSTALL_DIR,"$(DESTDIR)$(ghcheaderdir)")
868 for i in $(INSTALL_HEADERS); do \
869 $(call INSTALL_HEADER,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(ghcheaderdir)"); \
872 install_docs: $(INSTALL_DOCS)
873 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)")
874 ifneq "$(INSTALL_DOCS)" ""
875 for i in $(INSTALL_DOCS); do \
876 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)"); \
879 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html")
880 $(call INSTALL_DOC,$(INSTALL_OPTS),docs/index.html,"$(DESTDIR)$(docdir)/html")
881 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
882 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/libraries")
883 for i in $(INSTALL_LIBRARY_DOCS); do \
884 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i,"$(DESTDIR)$(docdir)/html/libraries/"); \
886 $(call INSTALL_DATA,$(INSTALL_OPTS),libraries/prologue.txt,"$(DESTDIR)$(docdir)/html/libraries/")
887 $(call INSTALL_SCRIPT,$(INSTALL_OPTS),libraries/gen_contents_index,"$(DESTDIR)$(docdir)/html/libraries/")
889 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
890 for i in $(INSTALL_HTML_DOC_DIRS); do \
891 $(call INSTALL_DIR,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
892 $(call INSTALL_DOC,$(INSTALL_OPTS),$$i/*,"$(DESTDIR)$(docdir)/html/`basename $$i`"); \
896 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
898 # Install packages in the right order, so that ghc-pkg doesn't complain.
899 # Also, install ghc-pkg first.
900 ifeq "$(Windows)" "NO"
901 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
902 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
904 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
905 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
908 INSTALLED_PKG_DIRS := $(addprefix libraries/,$(PACKAGES)) \
910 $(addprefix libraries/,$(PACKAGES_STAGE2))
911 ifeq "$(InstallExtraPackages)" "NO"
912 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(EXTRA_PACKAGES)),\
913 $(INSTALLED_PKG_DIRS))
915 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(INTREE_ONLY_PACKAGES)),\
916 $(INSTALLED_PKG_DIRS))
918 # Set the INSTALL_DISTDIR_p for each package; compiler is special
919 $(foreach p,$(filter-out compiler,$(INSTALLED_PKG_DIRS)),\
920 $(eval INSTALL_DISTDIR_$p = dist-install))
921 INSTALL_DISTDIR_compiler = stage2
923 # Now we can do the installation
924 install_packages: install_libexecs
925 install_packages: libffi/package.conf.install rts/package.conf.install
926 $(call INSTALL_DIR,"$(DESTDIR)$(topdir)")
927 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
928 $(call INSTALL_DIR,"$(INSTALLED_PACKAGE_CONF)")
929 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
930 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
931 $(foreach p, $(INSTALLED_PKG_DIRS), \
932 $(call make-command, \
933 "$(GHC_CABAL_INPLACE)" install \
934 "$(INSTALLED_GHC_REAL)" \
935 "$(INSTALLED_GHC_PKG_REAL)" \
937 "$(DESTDIR)$(topdir)" \
938 $p $(INSTALL_DISTDIR_$p) \
942 '$(docdir)/html/libraries' \
943 $(RelocatableBuild)))
944 $(foreach p, $(HIDDEN_PACKAGES), \
945 $(call make-command, \
946 "$(INSTALLED_GHC_PKG_REAL)" \
947 --global-conf "$(INSTALLED_PACKAGE_CONF)" hide $p))
949 # -----------------------------------------------------------------------------
950 # Binary distributions
952 ifneq "$(CLEANING)" "YES"
953 # This rule seems to hold some files open on Windows which prevents
954 # cleaning, perhaps due to the $(wildcard).
956 $(eval $(call bindist,.,\
960 configure config.sub config.guess install-sh \
965 $(INPLACE_BIN)/mkdirhier \
966 utils/ghc-cabal/dist-install/build/tmp/ghc-cabal \
967 utils/ghc-pwd/dist/build/tmp/ghc-pwd \
968 $(BINDIST_WRAPPERS) \
969 $(BINDIST_PERL_SOURCES) \
973 $(includes_H_CONFIG) \
974 $(includes_H_PLATFORM) \
975 $(includes_H_FILES) \
976 includes/ghcconfig.h \
977 includes/rts/Config.h \
979 $(INSTALL_LIBEXECS) \
980 $(INSTALL_LIBEXEC_SCRIPTS) \
983 $(INSTALL_MANPAGES) \
985 $(INSTALL_LIBRARY_DOCS) \
986 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
988 compiler/stage2/doc \
989 $(wildcard libraries/*/dist-install/doc/) \
990 $(wildcard libraries/*/*/dist-install/doc/) \
991 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
992 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
996 libraries/gen_contents_index \
997 libraries/prologue.txt \
998 $(wildcard libraries/dph/LICENSE \
999 libraries/dph/ghc-packages \
1000 libraries/dph/ghc-packages2 \
1001 libraries/dph/ghc-stage2-package) \
1004 # mk/project.mk gets an absolute path, so we manually include it in
1005 # the bindist with a relative path
1007 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1009 unix-binary-dist-prep:
1010 "$(RM)" $(RM_OPTS_REC) bindistprep/
1011 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1012 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1013 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1014 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
1015 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
1016 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
1017 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
1018 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1019 echo "GHC_CABAL_INPLACE = utils/ghc-cabal/dist-install/build/tmp/ghc-cabal" >> $(BIN_DIST_MK)
1020 cd $(BIN_DIST_PREP_DIR) && autoreconf
1021 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
1022 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1023 # tree then we want to include the real file, not a symlink to it
1024 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1026 windows-binary-dist-prep:
1027 "$(RM)" $(RM_OPTS_REC) bindistprep/
1028 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1029 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1032 ifeq "$(ISCC_CMD)" ""
1033 @echo No ISCC_CMD, so not making installer
1035 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1038 # tryTimes tries to run its third argument multiple times, until it
1039 # succeeds. Don't call it directly; call try10Times instead.
1040 # The first and second argument to tryTimes are lists of values.
1041 # The length of the first argument is the number of times we have
1042 # already tried. The length of the second argument is the number more
1043 # times we will try.
1044 tryTimes = $(if $2, \
1045 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1046 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1049 # Try to run the argument 10 times. If all 10 fail, fail.
1050 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1052 .PHONY: publish-binary-dist
1053 publish-binary-dist:
1054 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1055 ifeq "$(mingw32_TARGET_OS)" "1"
1056 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1059 ifeq "$(mingw32_TARGET_OS)" "1"
1060 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/doc
1062 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/share/doc/ghc
1065 .PHONY: publish-docs
1067 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1069 # -----------------------------------------------------------------------------
1070 # Source distributions
1078 # A source dist is built from a complete build tree, because we
1079 # require some extra files not contained in a darcs checkout: the
1080 # output from Happy and Alex, for example.
1082 # The steps performed by 'make dist' are as follows:
1083 # - create a complete link-tree of the current build tree in /tmp
1084 # - run 'make distclean' on that tree
1085 # - remove a bunch of other files that we know shouldn't be in the dist
1086 # - tar up first the extralibs package, then the main source package
1089 # Directory in which we're going to build the src dist
1091 SRC_DIST_NAME=ghc-$(ProjectVersion)
1092 SRC_DIST_DIR=$(TOP)/$(SRC_DIST_NAME)
1095 # Files to include in source distributions
1097 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1099 configure.ac config.guess config.sub configure \
1100 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1101 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1102 boot boot-pkgs packages ghc.mk
1104 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1107 echo $(ProjectVersion) >VERSION
1112 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1113 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1114 # "stage2" is the dist dir.
1116 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1117 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1122 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1123 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1124 mkdir $(SRC_DIST_DIR)
1125 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1126 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1127 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1128 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1129 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1130 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1131 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1132 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1133 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1134 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1135 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1136 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1137 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1138 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1139 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1140 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1141 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1145 "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1147 sdist-manifest : $(SRC_DIST_TARBALL)
1148 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1150 # Upload the distribution(s)
1151 # Retrying is to work around buggy firewalls that corrupt large file transfers
1153 ifneq "$(PublishLocation)" ""
1155 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1158 ifeq "$(BootingFromHc)" "YES"
1159 # In a normal build we use GHC to compile C files (see
1160 # rules/c-suffix-rules.mk), which passes a number of its own options
1161 # to the C compiler. So when bootstrapping we have to provide these
1162 # flags explicitly to C compilations.
1163 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1164 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1165 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1168 # -----------------------------------------------------------------------------
1169 # sdisting libraries
1171 # Use manually, with e.g.:
1172 # make sdist_directory
1175 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1177 # -----------------------------------------------------------------------------
1182 CLEAN_FILES += libraries/bootstrapping.conf
1183 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1184 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1186 clean : clean_files clean_libraries
1190 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1192 ifneq "$(NO_CLEAN_GMP)" "YES"
1193 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1194 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1199 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1200 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1203 .PHONY: clean_libraries
1204 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1205 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(STAGE0_PACKAGES))
1208 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1209 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1211 # We have to define a clean target for each library manually, because the
1212 # libraries/*/ghc.mk files are not included when we're cleaning.
1213 ifeq "$(CLEANING)" "YES"
1214 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1215 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1218 clean : clean_bindistprep
1219 .PHONY: clean_bindistprep
1221 "$(RM)" $(RM_OPTS_REC) bindistprep/
1224 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1225 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1226 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1227 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1228 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1229 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1230 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1231 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1232 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1233 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1234 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1235 "$(RM)" $(RM_OPTS_REC) utils/ghc-pwd/dist
1236 "$(RM)" $(RM_OPTS_REC) inplace
1238 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1239 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1240 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1241 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1243 maintainer-clean : distclean
1244 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1245 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1246 "$(RM)" $(RM_OPTS) ghc.spec
1247 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1248 $(PACKAGES) $(PACKAGES_STAGE2))
1249 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1250 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1251 $(PACKAGES) $(PACKAGES_STAGE2))
1252 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1253 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1254 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1255 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1256 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1258 .PHONY: all_libraries
1260 .PHONY: bootstrapping-files
1261 bootstrapping-files: $(OTHER_LIBS)
1262 bootstrapping-files: includes/ghcautoconf.h
1263 bootstrapping-files: includes/DerivedConstants.h
1264 bootstrapping-files: includes/GHCConstants.h