1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * other documentation
17 # * create doc index and contents
18 # * Windows: should we have ghc-pkg-<version>?
19 # * should we be stripping things?
20 # * install libgmp.a, gmp.h
21 # * need to fix Cabal for new Windows layout, see
22 # Distribution/Simple/GHC.configureToolchain.
23 # * remove old Makefiles, add new stubs for building in subdirs
25 # * docs/docbook-cheat-sheet/Makefile
26 # * docs/ext-core/Makefile
28 # * docs/storage-mgmt/Makefile
30 # * rts/dotnet/Makefile
32 # * optionally install stage3?
33 # * add Makefiles for the rest of the utils/ programs that aren't built
34 # by default (need to exclude them from 'make all' too)
36 # Tickets we can now close, or fix and close:
38 # * 1693 make distclean
39 # * 3173 make install with DESTDIR
43 # * per-source-file dependencies instead of one .depend file?
44 # * eliminate undefined variables, and use --warn-undefined-variables?
45 # * perhaps we should make all the output dirs in the .depend rule, to
46 # avoid all these mkdirhier calls?
47 # * put outputs from different ways in different subdirs of distdir/build,
48 # then we don't have to use -osuf/-hisuf. We would have to install
49 # them in different places too, so we'd need ghc-pkg support for packages
51 # * make PACKAGES generated by configure or sh boot?
52 # * we should use a directory of package.conf files rather than a single
53 # file for the inplace package database, so that we can express
54 # dependencies more accurately. Otherwise it's possible to get into
55 # a state where the package database is out of date, and the build
56 # system doesn't know.
58 # Approximate build order.
60 # The actual build order is defined by dependencies, and the phase
61 # ordering used to ensure correct ordering of makefile-generation; see
62 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
64 # * With bootstrapping compiler:
65 # o Build utils/ghc-cabal
66 # o Build utils/ghc-pkg
67 # o Build utils/hsc2hs
69 # o configure, generate package-data.mk and inplace-pkg-info
70 # o register each package into inplace/lib/package.conf
72 # * With bootstrapping compiler:
73 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
74 # o Build compiler (stage 1)
78 # o Build utils/* (except haddock)
79 # o Build compiler (stage 2)
81 # o Build utils/haddock
82 # o Build compiler (stage 3) (optional)
87 .PHONY: default all haddock
91 # Just bring makefiles up to date:
92 .PHONY: just-makefiles
96 # -----------------------------------------------------------------------------
100 space=$(nothing) $(nothing)
103 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
104 # by default, because that disables all the implicit rules, but there doesn't
105 # seem to be a good way to do that. This turns off all the old-style suffix
106 # rules, which does half the job and speeds up make quite a bit:
109 # -----------------------------------------------------------------------------
111 # to see the effective value used for a Makefile variable, do
112 # make show VALUE=MY_VALUE
116 @echo '$(VALUE)="$($(VALUE))"'
118 # -----------------------------------------------------------------------------
119 # Include subsidiary build-system bits
123 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
125 ifeq "$(ProjectVersion)" ""
126 $(error Please run ./configure first)
130 # (Optional) build-specific configuration
131 include mk/custom-settings.mk
133 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
134 ifeq "$(GhcLibWays)" ""
135 $(error $$(GhcLibWays) is empty, it must contain at least one way)
139 # -----------------------------------------------------------------------------
140 # Macros for standard targets
142 include rules/all-target.mk
143 include rules/clean-target.mk
145 # -----------------------------------------------------------------------------
148 $(eval $(call clean-target,inplace,,inplace))
150 # -----------------------------------------------------------------------------
151 # Whether to build dependencies or not
153 # When we're just doing 'make clean' or 'make show', then we don't need
154 # to build dependencies.
156 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
157 NO_INCLUDE_DEPS = YES
158 NO_INCLUDE_PKGDATA = YES
160 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
161 NO_INCLUDE_DEPS = YES
162 NO_INCLUDE_PKGDATA = YES
164 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
165 NO_INCLUDE_DEPS = YES
166 # We want package-data.mk for show
169 # We don't haddock base3-compat, as it has the same package name as base
170 libraries/base3-compat_dist-install_DO_HADDOCK = NO
172 # We don't haddock the bootstrapping libraries
173 libraries/hpc_dist-boot_DO_HADDOCK = NO
174 libraries/Cabal_dist-boot_DO_HADDOCK = NO
175 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
176 libraries/filepath_dist-boot_DO_HADDOCK = NO
178 # -----------------------------------------------------------------------------
181 include rules/way-prelims.mk
183 $(foreach way,$(ALL_WAYS),\
184 $(eval $(call way-prelims,$(way))))
186 # -----------------------------------------------------------------------------
189 include rules/distdir-opts.mk
190 include rules/distdir-way-opts.mk
192 # -----------------------------------------------------------------------------
193 # Finding source files and object files
195 include rules/hs-sources.mk
196 include rules/c-sources.mk
197 include rules/includes-sources.mk
198 include rules/hs-objs.mk
199 include rules/c-objs.mk
200 include rules/cmm-objs.mk
202 # -----------------------------------------------------------------------------
205 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
206 # so we don't make any when cleaning.
207 ifneq "$(CLEANING)" "YES"
209 include rules/hs-suffix-rules-srcdir.mk
210 include rules/hs-suffix-rules.mk
212 # -----------------------------------------------------------------------------
213 # Suffix rules for .hi files
215 include rules/hi-rule.mk
217 $(foreach way,$(ALL_WAYS),\
218 $(eval $(call hi-rule,$(way))))
220 #-----------------------------------------------------------------------------
221 # C-related suffix rules
223 include rules/c-suffix-rules.mk
225 #-----------------------------------------------------------------------------
226 # CMM-related suffix rules
228 include rules/cmm-suffix-rules.mk
232 # -----------------------------------------------------------------------------
233 # Building package-data.mk files from .cabal files
235 include rules/package-config.mk
237 # -----------------------------------------------------------------------------
238 # Building dependencies
240 include rules/build-dependencies.mk
242 # -----------------------------------------------------------------------------
243 # Build package-data.mk files
245 include rules/build-package-data.mk
247 # -----------------------------------------------------------------------------
248 # Build and install a program
250 include rules/build-prog.mk
251 include rules/shell-wrapper.mk
253 # -----------------------------------------------------------------------------
254 # Build a perl script
256 include rules/build-perl.mk
258 # -----------------------------------------------------------------------------
261 include rules/build-package.mk
262 include rules/build-package-way.mk
263 include rules/haddock.mk
265 # -----------------------------------------------------------------------------
266 # Registering hand-written package descriptions (used in libffi and rts)
268 include rules/manual-package-config.mk
270 # -----------------------------------------------------------------------------
273 include rules/docbook.mk
275 # -----------------------------------------------------------------------------
278 include rules/bindist.mk
280 # -----------------------------------------------------------------------------
283 define addPackage # args: $1 = package, $2 = condition
285 ifeq "$$(CLEANING)" "YES"
297 $(eval $(call addPackage,ghc-prim))
298 ifeq "$(CLEANING)" "YES"
299 $(eval $(call addPackage,integer-gmp))
300 $(eval $(call addPackage,integer-simple))
302 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
304 $(eval $(call addPackage,base))
305 $(eval $(call addPackage,filepath))
306 $(eval $(call addPackage,array))
307 $(eval $(call addPackage,bytestring))
308 $(eval $(call addPackage,containers))
310 $(eval $(call addPackage,Win32,($$(Windows),YES)))
311 $(eval $(call addPackage,unix,($$(Windows),NO)))
313 $(eval $(call addPackage,old-locale))
314 $(eval $(call addPackage,old-time))
315 $(eval $(call addPackage,time))
316 $(eval $(call addPackage,directory))
317 $(eval $(call addPackage,process))
318 $(eval $(call addPackage,random))
319 $(eval $(call addPackage,extensible-exceptions))
320 $(eval $(call addPackage,haskell98))
321 $(eval $(call addPackage,hpc))
322 $(eval $(call addPackage,pretty))
323 $(eval $(call addPackage,syb))
324 $(eval $(call addPackage,template-haskell))
325 $(eval $(call addPackage,base3-compat))
326 $(eval $(call addPackage,Cabal))
327 $(eval $(call addPackage,mtl))
328 $(eval $(call addPackage,utf8-string))
330 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
332 $(eval $(call addPackage,haskeline))
334 ifneq "$(BootingFromHc)" "YES"
337 dph/dph-prim-interface \
344 BOOT_PKGS = Cabal hpc extensible-exceptions
346 # The actual .a and .so/.dll files: needed for dependencies.
347 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
348 ifeq "$(BuildSharedLibs)" "YES"
349 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
351 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
353 OTHER_LIBS = libffi/libHSffi$(v_libsuf) libffi/HSffi.o
354 ifeq "$(BuildSharedLibs)" "YES"
355 OTHER_LIBS += libffi/libHSffi$(dyn_libsuf)
358 # We cannot run ghc-cabal to configure a package until we have
359 # configured and registered all of its dependencies. So the following
360 # hack forces all the configure steps to happen in exactly the order
361 # given in the PACKAGES variable above. Ideally we should use the
362 # correct dependencies here to allow more parallelism, but we don't
363 # know the dependencies until we've generated the pacakge-data.mk
366 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(if $$(fixed_pkg_prev),libraries/$$(fixed_pkg_prev)/$2/package-data.mk)
370 ifneq "$(BINDIST)" "YES"
372 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
374 # We assume that the stage2 compiler depends on all the libraries, so
375 # they all get added to the package database before we try to configure
377 compiler/stage2/package-data.mk: $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),libraries/$(pkg)/dist-install/package-data.mk)
378 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
379 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
380 # haddock depends on ghc and some libraries, but depending on GHC's
381 # package-data.mk is sufficient, as that in turn depends on all the
383 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
385 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
387 # add the final two package.conf dependencies: ghc-prim depends on RTS,
388 # and RTS depends on libffi.
389 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
390 rts/package.conf.inplace : libffi/package.conf.inplace
393 # -----------------------------------------------------------------------------
394 # Special magic for the ghc-prim package
396 # We want the ghc-prim package to include the GHC.Prim module when it
397 # is registered, but not when it is built, because GHC.Prim is not a
398 # real source module, it is built-in to GHC. The old build system did
399 # this using Setup.hs, but we can't do that here, so we have a flag to
400 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
401 # remains compatible with the old build system for the time being).
402 # GHC.Prim module in the ghc-prim package with a flag:
404 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
406 # And then we strip it out again before building the package:
407 define libraries/ghc-prim_PACKAGE_MAGIC
408 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
411 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
413 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
414 "$(MKDIRHIER)" $(dir $@)
415 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
417 libraries/ghc-prim/GHC/Prim.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
418 "$(GENPRIMOP_INPLACE)" --make-haskell-source <$(PRIMOPS_TXT) >$@
421 # -----------------------------------------------------------------------------
422 # Include build instructions from all subdirs
424 # For the rationale behind the build phases, see
425 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
427 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
428 # "dist", just read the package-data.mk file, do not build anything".
430 # We carefully engineer things so that we can build the
431 # package-data.mk files early on: they depend only on a few tools also
432 # built early. Having got the package-data.mk files built, we can
433 # restart make with up-to-date information about all the packages
434 # (this is phase 0). The remaining problem is the .depend files:
436 # - .depend files in libraries need the stage 1 compiler to build
437 # - ghc/stage1/.depend needs compiler/stage1 built
438 # - compiler/stage1/.depend needs the bootstrap libs built
440 # GHC 6.11+ can build a .depend file without having built the
441 # dependencies of the package, but we can't rely on the bootstrapping
442 # compiler being able to do this, which is why we have to separate the
443 # three phases above.
445 # So this is the final ordering:
447 # Phase 0 : all package-data.mk files
448 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
449 # Phase 1 : .depend files for bootstrap libs
451 # Phase 2 : compiler/stage1/.depend
452 # (requires bootstrap libs and genprimopcode)
453 # Phase 3 : ghc/stage1/.depend
454 # (requires compiler/stage1)
456 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
460 ifneq "$(BINDIST)" "YES"
462 $(GHC_MKDEPENDC_DIR) \
468 libraries/Cabal/doc \
472 ifneq "$(GhcUnregisterised)" "YES"
478 ifneq "$(BINDIST)" "YES"
491 ifneq "$(BINDIST)" "YES"
501 ifneq "$(CLEANING)" "YES"
503 $(patsubst %, libraries/%, $(PACKAGES) $(PACKAGES_STAGE2))
504 ifneq "$(BootingFromHc)" "YES"
510 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
511 BUILD_DIRS += libraries/integer-gmp/gmp
521 ifeq "$(Windows)" "YES"
526 # XXX libraries/% must come before any programs built with stage1, see
527 # Note [lib-depends].
530 $(foreach lib,$(BOOT_PKGS),$(eval \
531 libraries/$(lib)_dist-boot_DISABLE = YES))
534 ifneq "$(findstring $(phase),0 1)" ""
535 # We can build deps for compiler/stage1 in phase 2
536 compiler_stage1_DISABLE = YES
539 ifneq "$(findstring $(phase),0 1 2)" ""
540 ghc_stage1_DISABLE = YES
543 ifneq "$(CLEANING)" "YES"
544 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
545 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
547 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
548 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
550 $(error Unknown integer library: $(INTEGER_LIBRARY))
555 ifneq "$(findstring $(phase),0 1 2 3)" ""
556 # In phases 0-3, we disable stage2-3, the full libraries and haddock
557 utils/haddock_dist_DISABLE = YES
558 utils/runghc_dist_DISABLE = YES
559 utils/hpc_dist_DISABLE = YES
560 utils/hsc2hs_dist-install_DISABLE = YES
561 utils/ghc-pkg_dist-install_DISABLE = YES
562 compiler_stage2_DISABLE = YES
563 compiler_stage3_DISABLE = YES
564 ghc_stage2_DISABLE = YES
565 ghc_stage3_DISABLE = YES
566 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
567 libraries/$(lib)_dist-install_DISABLE = YES))
570 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
572 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
573 GhcLibHcOpts += -fno-warn-deprecated-flags
574 ifeq "$(ghc_ge_609)" "YES"
575 GhcBootLibHcOpts += -fno-warn-deprecated-flags
578 # Add $(GhcLibHcOpts) to all library builds
579 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
581 # XXX Hack; remove this
582 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
584 # XXX we configure packages with the bootstrapping compiler (for
585 # dependency reasons, see the phase ordering), which doesn't
586 # necessarily support all the extensions we need, and Cabal filters
587 # out the ones it thinks aren't supported.
588 libraries/base3-compat_dist-install_HC_OPTS += -XPackageImports
590 # A useful pseudo-target
592 stage1_libs : $(ALL_STAGE1_LIBS)
594 # -----------------------------------------------------------------------------
595 # Bootstrapping libraries
597 # We need to build a few libraries with the installed GHC, since GHC itself
598 # and some of the tools depend on them:
600 ifneq "$(BINDIST)" "YES"
602 ifneq "$(BOOTSTRAPPING_CONF)" ""
603 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
604 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
608 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
610 # These three libraries do not depend on each other, so we can build
613 $(eval $(call build-package,libraries/hpc,dist-boot,0))
614 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
615 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
617 # register the boot packages in strict sequence, because running
618 # multiple ghc-pkgs in parallel doesn't work (registrations may get
621 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
623 compiler/stage1/package-data.mk : \
624 libraries/Cabal/dist-boot/package-data.mk \
625 libraries/hpc/dist-boot/package-data.mk \
626 libraries/extensible-exceptions/dist-boot/package-data.mk
628 # These are necessary because the bootstrapping compiler may not know
629 # about cross-package dependencies:
630 $(compiler_stage1_depfile) : $(BOOT_LIBS)
631 $(ghc_stage1_depfile) : $(compiler_stage1_v_LIB)
633 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
637 # -----------------------------------------------------------------------------
638 # Creating a local mingw copy on Windows
640 ifeq "$(Windows)" "YES"
642 # directories don't work well as dependencies, hence a stamp file
643 $(INPLACE)/stamp-mingw : $(MKDIRHIER)
644 $(MKDIRHIER) $(INPLACE_MINGW)/bin
645 GCC=`type -p $(WhatGccIsCalled)`; \
646 GccDir=`dirname $$GCC`; \
647 "$(CP)" -p $$GccDir/{gcc.exe,ar.exe,as.exe,dlltool.exe,dllwrap.exe,windres.exe} $(INPLACE_MINGW)/bin; \
648 "$(CP)" -Rp $$GccDir/../include $(INPLACE_MINGW); \
649 "$(CP)" -Rp $$GccDir/../lib $(INPLACE_MINGW); \
650 "$(CP)" -Rp $$GccDir/../libexec $(INPLACE_MINGW); \
651 "$(CP)" -Rp $$GccDir/../mingw32 $(INPLACE_MINGW)
652 touch $(INPLACE)/stamp-mingw
654 install : install_mingw
655 .PHONY: install_mingw
656 install_mingw : $(INPLACE_MINGW)
657 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
659 $(INPLACE_LIB)/perl.exe $(INPLACE_LIB)/perl56.dll :
660 "$(CP)" $(GhcDir)../{perl.exe,perl56.dll} $(INPLACE_LIB)
664 libraries/ghc-prim/dist-install/doc/html/ghc-prim/ghc-prim.haddock: \
665 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
666 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
668 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
669 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
670 "$(MKDIRHIER)" $(dir $@)
671 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
673 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
674 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
675 "$(MKDIRHIER)" $(dir $@)
676 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
678 # -----------------------------------------------------------------------------
681 install: install_packages install_libs install_libexecs install_headers \
682 install_libexec_scripts install_bins install_docs
684 install_bins: $(INSTALL_BINS)
685 $(INSTALL_DIR) $(DESTDIR)$(bindir)
686 for i in $(INSTALL_BINS); do \
687 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(bindir) ; \
688 if test "$(darwin_TARGET_OS)" = "1"; then \
689 sh mk/fix_install_names.sh $(libdir) $(DESTDIR)$(bindir)/$$i ; \
693 install_libs: $(INSTALL_LIBS)
694 $(INSTALL_DIR) $(DESTDIR)$(libdir)
695 for i in $(INSTALL_LIBS); do \
698 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
699 $(RANLIB) $(DESTDIR)$(libdir)/`basename $$i` ;; \
701 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
703 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
705 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
706 install_name_tool -id $(DESTDIR)$(libdir)/`basename $$i` $(DESTDIR)$(libdir)/`basename $$i` ;; \
708 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
712 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
713 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
714 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
715 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(libexecdir); \
718 install_libexecs: $(INSTALL_LIBEXECS)
719 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
720 for i in $(INSTALL_LIBEXECS); do \
721 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(libexecdir); \
724 install_headers: $(INSTALL_HEADERS)
725 $(INSTALL_DIR) $(DESTDIR)$(headerdir)
726 for i in $(INSTALL_HEADERS); do \
727 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i $(DESTDIR)$(headerdir); \
730 install_docs: $(INSTALL_HEADERS)
731 $(INSTALL_DIR) $(DESTDIR)$(docdir)
732 for i in $(INSTALL_DOCS); do \
733 $(INSTALL_DOC) $(INSTALL_OPTS) $$i $(DESTDIR)$(docdir); \
735 $(INSTALL_DIR) $(INSTALL_OPTS) $(DESTDIR)$(docdir)/html; \
736 for i in $(INSTALL_HTML_DOC_DIRS); do \
737 $(INSTALL_DIR) $(INSTALL_OPTS) $(DESTDIR)$(docdir)/html/`basename $$i`; \
738 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* $(DESTDIR)$(docdir)/html/`basename $$i`; \
741 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(libdir)/package.conf
743 # Install packages in the right order, so that ghc-pkg doesn't complain.
744 # Also, install ghc-pkg first.
745 ifeq "$(Windows)" "NO"
746 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(libexecdir)/ghc-pkg
748 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
751 install_packages: install_libexecs
752 install_packages: libffi/package.conf.install rts/package.conf.install
753 "$(MKDIRHIER)" $(DESTDIR)$(libdir)
754 echo "[]" > $(INSTALLED_PACKAGE_CONF)
755 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update libffi/package.conf.install
756 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update rts/package.conf.install
757 $(foreach p, $(PACKAGES) $(PACKAGES_STAGE2),\
758 "$(GHC_CABAL_INPLACE)" install \
759 $(INSTALLED_GHC_PKG_REAL) \
760 $(INSTALLED_PACKAGE_CONF) \
761 libraries/$p dist-install \
762 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries' &&) true
763 "$(GHC_CABAL_INPLACE)" install \
764 $(INSTALLED_GHC_PKG_REAL) \
765 $(INSTALLED_PACKAGE_CONF) \
767 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries'
769 # -----------------------------------------------------------------------------
770 # Binary distributions
772 $(eval $(call bindist,.,\
774 configure config.sub config.guess install-sh \
778 $(INPLACE_BIN)/mkdirhier \
779 $(INPLACE_BIN)/ghc-cabal \
780 utils/ghc-pwd/ghc-pwd \
781 $(BINDIST_WRAPPERS) \
786 $(INSTALL_LIBEXECS) \
787 $(INSTALL_LIBEXEC_SCRIPTS) \
790 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
791 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
792 $(filter-out %/project.mk,$(filter-out mk/config.mk,$(MAKEFILE_LIST))) \
793 mk/fix_install_names.sh \
796 libraries/dph/LICENSE \
798 # mk/project.mk gets an absolute path, so we manually include it in
799 # the bindist with a relative path
801 BIN_DIST_MK = $(BIN_DIST_NAME)/bindist.mk
804 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
805 mkdir $(BIN_DIST_NAME)
806 set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace; do ln -s ../$$i $(BIN_DIST_NAME)/; done
807 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
808 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
809 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
810 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
811 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
812 ln -s ../distrib/configure-bin.ac $(BIN_DIST_NAME)/configure.ac
813 cd $(BIN_DIST_NAME) && autoreconf
814 "$(RM)" $(RM_OPTS) $(BIN_DIST_TAR)
815 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
816 # tree then we want to include the real file, not a symlink to it
817 "$(TAR)" hcf - -T $(BIN_DIST_LIST) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
820 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
821 $(MAKE) prefix=$(BIN_DIST_DIR) install
822 "$(TAR)" cf - $(BIN_DIST_NAME) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
825 "$(ISCC)" /O. /F$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
827 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
829 .PHONY: publish-binary-dist
831 $(call nTimes,10,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
832 ifeq "$(mingw32_TARGET_OS)" "1"
833 $(call nTimes,10,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
836 # -----------------------------------------------------------------------------
837 # Source distributions
845 # A source dist is built from a complete build tree, because we
846 # require some extra files not contained in a darcs checkout: the
847 # output from Happy and Alex, for example.
849 # The steps performed by 'make dist' are as follows:
850 # - create a complete link-tree of the current build tree in /tmp
851 # - run 'make distclean' on that tree
852 # - remove a bunch of other files that we know shouldn't be in the dist
853 # - tar up first the extralibs package, then the main source package
856 # Directory in which we're going to build the src dist
858 SRC_DIST_NAME=ghc-$(ProjectVersion)
859 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
862 # Files to include in source distributions
864 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries
866 configure.ac config.guess config.sub configure \
867 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
868 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
869 boot boot-pkgs packages ghc.mk
871 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
874 echo $(ProjectVersion) >VERSION
879 # $(call sdist_file,compiler,stage2,cmm,CmmLex,x)
880 # to copy the generated file that replaces compiler/cmm/CmmLex.x, where
881 # "stage2" is the dist dir.
883 if test -f $(TOP)/$1/$2/build/$4.hs; then \
884 "$(CP)" $(TOP)/$1/$2/build/$4.hs $1/$3/ ; \
885 mv $1/$3/$4.$5 $1/$3/$4.$5.source ;\
887 echo "does not exist: $1/$2//build/$4.hs"; \
893 "$(RM)" $(RM_OPTS) -r $(SRC_DIST_DIR)
894 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
895 mkdir $(SRC_DIST_DIR)
896 ( cd $(SRC_DIST_DIR) \
897 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(TOP)/$$i ); done \
898 && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done \
899 && $(MAKE) distclean \
900 && if test -f $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then "$(CP)" $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
901 && $(call sdist_file,compiler,stage2,cmm,CmmLex,x) \
902 && $(call sdist_file,compiler,stage2,cmm,CmmParse,y) \
903 && $(call sdist_file,compiler,stage2,main,ParsePkgConf,y) \
904 && $(call sdist_file,compiler,stage2,parser,HaddockLex,x) \
905 && $(call sdist_file,compiler,stage2,parser,HaddockParse,y) \
906 && $(call sdist_file,compiler,stage2,parser,Lexer,x) \
907 && $(call sdist_file,compiler,stage2,parser,Parser,y.pp) \
908 && $(call sdist_file,compiler,stage2,parser,ParserCore,y) \
909 && $(call sdist_file,utils/hpc,dist,,HpcParser,y) \
910 && $(call sdist_file,utils/genprimopcode,dist,,Lexer,x) \
911 && $(call sdist_file,utils/genprimopcode,dist,,Parser,y) \
912 && "$(RM)" $(RM_OPTS) -r compiler/stage[123] mk/build.mk \
913 && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | xargs "$(RM)" $(RM_OPTS) -r \
918 "$(TAR)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
920 sdist-manifest : $(SRC_DIST_TARBALL)
921 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
923 # Upload the distribution(s)
924 # Retrying is to work around buggy firewalls that corrupt large file transfers
926 ifneq "$(PublishLocation)" ""
928 $(call nTimes,10,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
931 ifeq "$(GhcUnregisterised)" "YES"
932 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
935 # -----------------------------------------------------------------------------
940 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
941 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
942 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
943 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
944 CLEAN_FILES += libraries/bootstrapping.conf
946 clean : clean_files clean_libraries
950 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
952 .PHONY: clean_libraries
953 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
954 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
957 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
958 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
960 # We have to define a clean target for each library manually, because the
961 # libraries/*/ghc.mk files are not included when we're cleaning.
962 ifeq "$(CLEANING)" "YES"
963 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
964 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
968 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
969 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
970 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
971 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
972 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
973 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
974 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
975 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
976 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
977 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
978 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
980 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
981 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
982 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
983 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
985 maintainer-clean : distclean
986 "$(RM)" $(RM_OPTS) configure mk/config.h.in
987 "$(RM)" $(RM_OPTS) -r autom4te.cache libraries/*/autom4te.cache
988 "$(RM)" $(RM_OPTS) ghc.spec
989 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
990 $(PACKAGES) $(PACKAGES_STAGE2))
991 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
992 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
993 $(PACKAGES) $(PACKAGES_STAGE2))
994 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
995 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
996 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
997 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
998 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1000 .PHONY: all_libraries
1002 .PHONY: bootstrapping-files
1003 bootstrapping-files: $(OTHER_LIBS)
1004 bootstrapping-files: includes/ghcautoconf.h
1005 bootstrapping-files: includes/DerivedConstants.h
1006 bootstrapping-files: includes/GHCConstants.h