1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * other documentation
17 # * create doc index and contents
18 # * Windows: should we have ghc-pkg-<version>?
19 # * should we be stripping things?
20 # * install libgmp.a, gmp.h
21 # * need to fix Cabal for new Windows layout, see
22 # Distribution/Simple/GHC.configureToolchain.
23 # * remove old Makefiles, add new stubs for building in subdirs
25 # * docs/docbook-cheat-sheet/Makefile
26 # * docs/ext-core/Makefile
28 # * docs/storage-mgmt/Makefile
30 # * rts/dotnet/Makefile
33 # * optionally install stage3?
34 # * shared libraries, way dyn
35 # * add Makefiles for the rest of the utils/ programs that aren't built
36 # by default (need to exclude them from 'make all' too)
38 # Tickets we can now close, or fix and close:
40 # * 1693 make distclean
41 # * 3173 make install with DESTDIR
45 # * per-source-file dependencies instead of one .depend file?
46 # * eliminate undefined variables, and use --warn-undefined-variables?
47 # * perhaps we should make all the output dirs in the .depend rule, to
48 # avoid all these mkdirhier calls?
49 # * put outputs from different ways in different subdirs of distdir/build,
50 # then we don't have to use -osuf/-hisuf. We would have to install
51 # them in different places too, so we'd need ghc-pkg support for packages
53 # * make PACKAGES generated by configure or sh boot?
54 # * we should use a directory of package.conf files rather than a single
55 # file for the inplace package database, so that we can express
56 # dependencies more accurately. Otherwise it's possible to get into
57 # a state where the package database is out of date, and the build
58 # system doesn't know.
60 # Approximate build order.
62 # The actual build order is defined by dependencies, and the phase
63 # ordering used to ensure correct ordering of makefile-generation; see
64 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
66 # * With bootstrapping compiler:
67 # o Build utils/ghc-cabal
68 # o Build utils/ghc-pkg
69 # o Build utils/hsc2hs
71 # o configure, generate package-data.mk and inplace-pkg-info
72 # o register each package into inplace/lib/package.conf
74 # * With bootstrapping compiler:
75 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
76 # o Build compiler (stage 1)
80 # o Build utils/* (except haddock)
81 # o Build compiler (stage 2)
83 # o Build utils/haddock
84 # o Build compiler (stage 3) (optional)
89 .PHONY: default all haddock
93 # Just bring makefiles up to date:
94 .PHONY: just-makefiles
98 # -----------------------------------------------------------------------------
102 space=$(nothing) $(nothing)
105 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
106 # by default, because that disables all the implicit rules, but there doesn't
107 # seem to be a good way to do that. This turns off all the old-style suffix
108 # rules, which does half the job and speeds up make quite a bit:
111 # -----------------------------------------------------------------------------
113 # to see the effective value used for a Makefile variable, do
114 # make show VALUE=MY_VALUE
118 @echo '$(VALUE)="$($(VALUE))"'
120 # -----------------------------------------------------------------------------
121 # Include subsidiary build-system bits
125 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
127 ifeq "$(ProjectVersion)" ""
128 $(error Please run ./configure first)
132 # (Optional) build-specific configuration
133 include mk/custom-settings.mk
135 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
136 ifeq "$(GhcLibWays)" ""
137 $(error $$(GhcLibWays) is empty, it must contain at least one way)
141 # -----------------------------------------------------------------------------
142 # Macros for standard targets
144 include rules/all-target.mk
145 include rules/clean-target.mk
147 # -----------------------------------------------------------------------------
150 $(eval $(call clean-target,inplace,,inplace))
152 # -----------------------------------------------------------------------------
153 # Whether to build dependencies or not
155 # When we're just doing 'make clean' or 'make show', then we don't need
156 # to build dependencies.
158 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
159 NO_INCLUDE_DEPS = YES
160 NO_INCLUDE_PKGDATA = YES
162 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
163 NO_INCLUDE_DEPS = YES
164 NO_INCLUDE_PKGDATA = YES
166 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
167 NO_INCLUDE_DEPS = YES
168 # We want package-data.mk for show
171 # We don't haddock base3-compat, as it has the same package name as base
172 libraries/base3-compat_dist-install_DO_HADDOCK = NO
174 # We don't haddock the bootstrapping libraries
175 libraries/hpc_dist-boot_DO_HADDOCK = NO
176 libraries/Cabal_dist-boot_DO_HADDOCK = NO
177 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
178 libraries/filepath_dist-boot_DO_HADDOCK = NO
180 # -----------------------------------------------------------------------------
183 include rules/way-prelims.mk
185 $(foreach way,$(ALL_WAYS),\
186 $(eval $(call way-prelims,$(way))))
188 # -----------------------------------------------------------------------------
191 include rules/distdir-opts.mk
192 include rules/distdir-way-opts.mk
194 # -----------------------------------------------------------------------------
195 # Finding source files and object files
197 include rules/hs-sources.mk
198 include rules/c-sources.mk
199 include rules/includes-sources.mk
200 include rules/hs-objs.mk
201 include rules/c-objs.mk
202 include rules/cmm-objs.mk
204 # -----------------------------------------------------------------------------
207 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
208 # so we don't make any when cleaning.
209 ifneq "$(CLEANING)" "YES"
211 include rules/hs-suffix-rules-srcdir.mk
212 include rules/hs-suffix-rules.mk
214 # -----------------------------------------------------------------------------
215 # Suffix rules for .hi files
217 include rules/hi-rule.mk
219 $(foreach way,$(ALL_WAYS),\
220 $(eval $(call hi-rule,$(way))))
222 #-----------------------------------------------------------------------------
223 # C-related suffix rules
225 include rules/c-suffix-rules.mk
227 #-----------------------------------------------------------------------------
228 # CMM-related suffix rules
230 include rules/cmm-suffix-rules.mk
234 # -----------------------------------------------------------------------------
235 # Building package-data.mk files from .cabal files
237 include rules/package-config.mk
239 # -----------------------------------------------------------------------------
240 # Building dependencies
242 include rules/build-dependencies.mk
244 # -----------------------------------------------------------------------------
245 # Build package-data.mk files
247 include rules/build-package-data.mk
249 # -----------------------------------------------------------------------------
250 # Build and install a program
252 include rules/build-prog.mk
253 include rules/shell-wrapper.mk
255 # -----------------------------------------------------------------------------
256 # Build a perl script
258 include rules/build-perl.mk
260 # -----------------------------------------------------------------------------
263 include rules/build-package.mk
264 include rules/build-package-way.mk
265 include rules/haddock.mk
267 # -----------------------------------------------------------------------------
268 # Registering hand-written package descriptions (used in libffi and rts)
270 include rules/manual-package-config.mk
272 # -----------------------------------------------------------------------------
275 include rules/docbook.mk
277 # -----------------------------------------------------------------------------
280 include rules/bindist.mk
282 # -----------------------------------------------------------------------------
285 # XXX generate from $(TOP)/packages
296 ifeq "$(Windows)" "YES"
309 extensible-exceptions \
320 ifneq "$(Windows)" "YES"
324 PACKAGES += haskeline
326 ifneq "$(BootingFromHc)" "YES"
329 dph/dph-prim-interface \
336 BOOT_PKGS = Cabal hpc extensible-exceptions
338 # The actual .a and .so/.dll files: needed for dependencies.
339 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
340 ifeq "$(BuildSharedLibs)" "YES"
341 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
343 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
345 OTHER_LIBS = libffi/libHSffi$(v_libsuf) libffi/HSffi.o
346 ifeq "$(BuildSharedLibs)" "YES"
347 OTHER_LIBS += libffi/libHSffi$(dyn_libsuf)
350 # We cannot run ghc-cabal to configure a package until we have
351 # configured and registered all of its dependencies. So the following
352 # hack forces all the configure steps to happen in exactly the order
353 # given in the PACKAGES variable above. Ideally we should use the
354 # correct dependencies here to allow more parallelism, but we don't
355 # know the dependencies until we've generated the pacakge-data.mk
358 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(if $$(fixed_pkg_prev),libraries/$$(fixed_pkg_prev)/$2/package-data.mk)
362 ifneq "$(BINDIST)" "YES"
364 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
366 # We assume that the stage2 compiler depends on all the libraries, so
367 # they all get added to the package database before we try to configure
369 compiler/stage2/package-data.mk: $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),libraries/$(pkg)/dist-install/package-data.mk)
370 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
371 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
372 # haddock depends on ghc and some libraries, but depending on GHC's
373 # package-data.mk is sufficient, as that in turn depends on all the
375 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
377 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
379 # add the final two package.conf dependencies: ghc-prim depends on RTS,
380 # and RTS depends on libffi.
381 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
382 rts/package.conf.inplace : libffi/package.conf.inplace
385 # -----------------------------------------------------------------------------
386 # Special magic for the ghc-prim package
388 # We want the ghc-prim package to include the GHC.Prim module when it
389 # is registered, but not when it is built, because GHC.Prim is not a
390 # real source module, it is built-in to GHC. The old build system did
391 # this using Setup.hs, but we can't do that here, so we have a flag to
392 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
393 # remains compatible with the old build system for the time being).
394 # GHC.Prim module in the ghc-prim package with a flag:
396 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
398 # And then we strip it out again before building the package:
399 define libraries/ghc-prim_PACKAGE_MAGIC
400 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
403 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
405 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
406 "$(MKDIRHIER)" $(dir $@)
407 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
409 libraries/ghc-prim/GHC/Prim.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
410 "$(GENPRIMOP_INPLACE)" --make-haskell-source <$(PRIMOPS_TXT) >$@
413 # -----------------------------------------------------------------------------
414 # Include build instructions from all subdirs
416 # For the rationale behind the build phases, see
417 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
419 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
420 # "dist", just read the package-data.mk file, do not build anything".
422 # We carefully engineer things so that we can build the
423 # package-data.mk files early on: they depend only on a few tools also
424 # built early. Having got the package-data.mk files built, we can
425 # restart make with up-to-date information about all the packages
426 # (this is phase 0). The remaining problem is the .depend files:
428 # - .depend files in libraries need the stage 1 compiler to build
429 # - ghc/stage1/.depend needs compiler/stage1 built
430 # - compiler/stage1/.depend needs the bootstrap libs built
432 # GHC 6.11+ can build a .depend file without having built the
433 # dependencies of the package, but we can't rely on the bootstrapping
434 # compiler being able to do this, which is why we have to separate the
435 # three phases above.
437 # So this is the final ordering:
439 # Phase 0 : all package-data.mk files
440 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
441 # Phase 1 : .depend files for bootstrap libs
443 # Phase 2 : compiler/stage1/.depend
444 # (requires bootstrap libs and genprimopcode)
445 # Phase 3 : ghc/stage1/.depend
446 # (requires compiler/stage1)
448 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
452 ifneq "$(BINDIST)" "YES"
454 $(GHC_MKDEPENDC_DIR) \
460 libraries/Cabal/doc \
464 ifneq "$(GhcUnregisterised)" "YES"
470 ifneq "$(BINDIST)" "YES"
483 ifneq "$(BINDIST)" "YES"
493 ifneq "$(CLEANING)" "YES"
495 $(patsubst %, libraries/%, $(PACKAGES) $(PACKAGES_STAGE2))
496 ifneq "$(BootingFromHc)" "YES"
503 libraries/integer-gmp/gmp \
510 ifeq "$(Windows)" "YES"
515 # XXX libraries/% must come before any programs built with stage1, see
516 # Note [lib-depends].
519 $(foreach lib,$(BOOT_PKGS),$(eval \
520 libraries/$(lib)_dist-boot_DISABLE = YES))
523 ifneq "$(findstring $(phase),0 1)" ""
524 # We can build deps for compiler/stage1 in phase 2
525 compiler_stage1_DISABLE = YES
528 ifneq "$(findstring $(phase),0 1 2)" ""
529 ghc_stage1_DISABLE = YES
532 ifneq "$(findstring $(phase),0 1 2 3)" ""
533 # In phases 0-3, we disable stage2-3, the full libraries and haddock
534 utils/haddock_dist_DISABLE = YES
535 utils/runghc_dist_DISABLE = YES
536 utils/hpc_dist_DISABLE = YES
537 utils/hsc2hs_dist-install_DISABLE = YES
538 utils/ghc-pkg_dist-install_DISABLE = YES
539 compiler_stage2_DISABLE = YES
540 compiler_stage3_DISABLE = YES
541 ghc_stage2_DISABLE = YES
542 ghc_stage3_DISABLE = YES
543 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
544 libraries/$(lib)_dist-install_DISABLE = YES))
547 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
549 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
550 GhcLibHcOpts += -fno-warn-deprecated-flags
551 ifeq "$(ghc_ge_609)" "YES"
552 GhcBootLibHcOpts += -fno-warn-deprecated-flags
555 # Add $(GhcLibHcOpts) to all library builds
556 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
558 # XXX Hack; remove this
559 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
561 # XXX we configure packages with the bootstrapping compiler (for
562 # dependency reasons, see the phase ordering), which doesn't
563 # necessarily support all the extensions we need, and Cabal filters
564 # out the ones it thinks aren't supported.
565 libraries/base3-compat_dist-install_HC_OPTS += -XPackageImports
567 # A useful pseudo-target
569 stage1_libs : $(ALL_STAGE1_LIBS)
571 # -----------------------------------------------------------------------------
572 # Bootstrapping libraries
574 # We need to build a few libraries with the installed GHC, since GHC itself
575 # and some of the tools depend on them:
577 ifneq "$(BINDIST)" "YES"
579 ifneq "$(BOOTSTRAPPING_CONF)" ""
580 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
581 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
585 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
587 # These three libraries do not depend on each other, so we can build
590 $(eval $(call build-package,libraries/hpc,dist-boot,0))
591 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
592 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
594 # register the boot packages in strict sequence, because running
595 # multiple ghc-pkgs in parallel doesn't work (registrations may get
598 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
600 compiler/stage1/package-data.mk : \
601 libraries/Cabal/dist-boot/package-data.mk \
602 libraries/hpc/dist-boot/package-data.mk \
603 libraries/extensible-exceptions/dist-boot/package-data.mk
605 # These are necessary because the bootstrapping compiler may not know
606 # about cross-package dependencies:
607 $(compiler_stage1_depfile) : $(BOOT_LIBS)
608 $(ghc_stage1_depfile) : $(compiler_stage1_v_LIB)
610 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
614 # -----------------------------------------------------------------------------
615 # Creating a local mingw copy on Windows
617 ifeq "$(Windows)" "YES"
619 # directories don't work well as dependencies, hence a stamp file
620 $(INPLACE)/stamp-mingw : $(MKDIRHIER)
621 $(MKDIRHIER) $(INPLACE_MINGW)/bin
622 GCC=`type -p $(WhatGccIsCalled)`; \
623 GccDir=`dirname $$GCC`; \
624 "$(CP)" -p $$GccDir/{gcc.exe,ar.exe,as.exe,dlltool.exe,dllwrap.exe,windres.exe} $(INPLACE_MINGW)/bin; \
625 "$(CP)" -Rp $$GccDir/../include $(INPLACE_MINGW); \
626 "$(CP)" -Rp $$GccDir/../lib $(INPLACE_MINGW); \
627 "$(CP)" -Rp $$GccDir/../libexec $(INPLACE_MINGW); \
628 "$(CP)" -Rp $$GccDir/../mingw32 $(INPLACE_MINGW)
629 touch $(INPLACE)/stamp-mingw
631 install : install_mingw
632 .PHONY: install_mingw
633 install_mingw : $(INPLACE_MINGW)
634 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
636 $(INPLACE_LIB)/perl.exe $(INPLACE_LIB)/perl56.dll :
637 "$(CP)" $(GhcDir)../{perl.exe,perl56.dll} $(INPLACE_LIB)
641 libraries/ghc-prim/dist-install/doc/html/ghc-prim/ghc-prim.haddock: \
642 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
643 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
645 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
646 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
647 "$(MKDIRHIER)" $(dir $@)
648 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
650 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
651 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
652 "$(MKDIRHIER)" $(dir $@)
653 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
655 # -----------------------------------------------------------------------------
658 install: install_packages install_libs install_libexecs install_headers \
659 install_libexec_scripts install_bins
661 install_bins: $(INSTALL_BINS)
662 $(INSTALL_DIR) $(DESTDIR)$(bindir)
663 for i in $(INSTALL_BINS); do \
664 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(bindir) ; \
665 if test "$(darwin_TARGET_OS)" = "1"; then \
666 sh mk/fix_install_names.sh $(libdir) $(DESTDIR)$(bindir)/$$i ; \
670 install_libs: $(INSTALL_LIBS)
671 $(INSTALL_DIR) $(DESTDIR)$(libdir)
672 for i in $(INSTALL_LIBS); do \
675 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
676 $(RANLIB) $(DESTDIR)$(libdir)/`basename $$i` ;; \
678 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
680 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
682 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
683 install_name_tool -id $(DESTDIR)$(libdir)/`basename $$i` $(DESTDIR)$(libdir)/`basename $$i` ;; \
685 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
689 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
690 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
691 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
692 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(libexecdir); \
695 install_libexecs: $(INSTALL_LIBEXECS)
696 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
697 for i in $(INSTALL_LIBEXECS); do \
698 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(libexecdir); \
701 install_headers: $(INSTALL_HEADERS)
702 $(INSTALL_DIR) $(DESTDIR)$(headerdir)
703 for i in $(INSTALL_HEADERS); do \
704 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i $(DESTDIR)$(headerdir); \
707 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(libdir)/package.conf
709 # Install packages in the right order, so that ghc-pkg doesn't complain.
710 # Also, install ghc-pkg first.
711 ifeq "$(Windows)" "NO"
712 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(libexecdir)/ghc-pkg
714 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
717 install_packages: install_libexecs
718 install_packages: libffi/package.conf.install rts/package.conf.install
719 "$(MKDIRHIER)" $(DESTDIR)$(libdir)
720 echo "[]" > $(INSTALLED_PACKAGE_CONF)
721 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update libffi/package.conf.install
722 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update rts/package.conf.install
723 $(foreach p, $(PACKAGES) $(PACKAGES_STAGE2),\
724 "$(GHC_CABAL_INPLACE)" install \
725 $(INSTALLED_GHC_PKG_REAL) \
726 $(INSTALLED_PACKAGE_CONF) \
727 libraries/$p dist-install \
728 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries' &&) true
729 "$(GHC_CABAL_INPLACE)" install \
730 $(INSTALLED_GHC_PKG_REAL) \
731 $(INSTALLED_PACKAGE_CONF) \
733 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries'
735 # -----------------------------------------------------------------------------
736 # Binary distributions
738 $(eval $(call bindist,.,\
740 configure config.sub config.guess install-sh \
744 $(INPLACE_BIN)/mkdirhier \
745 $(INPLACE_BIN)/ghc-cabal \
746 utils/ghc-pwd/ghc-pwd \
747 $(BINDIST_WRAPPERS) \
752 $(INSTALL_LIBEXECS) \
753 $(INSTALL_LIBEXEC_SCRIPTS) \
755 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
756 $(filter-out %/project.mk,$(filter-out mk/config.mk,$(MAKEFILE_LIST))) \
757 mk/fix_install_names.sh \
759 libraries/dph/LICENSE \
761 # mk/project.mk gets an absolute path, so we manually include it in
762 # the bindist with a relative path
765 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
766 mkdir $(BIN_DIST_NAME)
767 set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace; do ln -s ../$$i $(BIN_DIST_NAME)/; done
768 ln -s ../distrib/configure-bin.ac $(BIN_DIST_NAME)/configure.ac
769 cd $(BIN_DIST_NAME) && autoreconf
770 "$(RM)" $(RM_OPTS) $(BIN_DIST_TAR)
771 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
772 # tree then we want to include the real file, not a symlink to it
773 "$(TAR)" hcf - -T $(BIN_DIST_LIST) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
776 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
777 $(MAKE) prefix=$(BIN_DIST_DIR) install
778 "$(TAR)" cf - $(BIN_DIST_NAME) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
781 "$(ISCC)" /O. /F$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
783 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
785 .PHONY: publish-binary-dist
787 $(call nTimes,10,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
788 ifeq "$(mingw32_TARGET_OS)" "1"
789 $(call nTimes,10,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
792 # -----------------------------------------------------------------------------
793 # Source distributions
801 # A source dist is built from a complete build tree, because we
802 # require some extra files not contained in a darcs checkout: the
803 # output from Happy and Alex, for example.
805 # The steps performed by 'make dist' are as follows:
806 # - create a complete link-tree of the current build tree in /tmp
807 # - run 'make distclean' on that tree
808 # - remove a bunch of other files that we know shouldn't be in the dist
809 # - tar up first the extralibs package, then the main source package
812 # Directory in which we're going to build the src dist
814 SRC_DIST_NAME=ghc-$(ProjectVersion)
815 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
818 # Files to include in source distributions
820 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries
822 configure.ac config.guess config.sub configure \
823 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
824 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
825 boot boot-pkgs packages ghc.mk
827 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
830 echo $(ProjectVersion) >VERSION
835 # $(call sdist_file,compiler,stage2,cmm,CmmLex,x)
836 # to copy the generated file that replaces compiler/cmm/CmmLex.x, where
837 # "stage2" is the dist dir.
839 if test -f $(TOP)/$1/$2/build/$4.hs; then \
840 "$(CP)" $(TOP)/$1/$2/build/$4.hs $1/$3/ ; \
841 mv $1/$3/$4.$5 $1/$3/$4.$5.source ;\
843 echo "does not exist: $1/$2//build/$4.hs"; \
849 "$(RM)" $(RM_OPTS) -r $(SRC_DIST_DIR)
850 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
851 mkdir $(SRC_DIST_DIR)
852 ( cd $(SRC_DIST_DIR) \
853 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(TOP)/$$i ); done \
854 && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done \
855 && $(MAKE) distclean \
856 && if test -f $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then "$(CP)" $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
857 && $(call sdist_file,compiler,stage2,cmm,CmmLex,x) \
858 && $(call sdist_file,compiler,stage2,cmm,CmmParse,y) \
859 && $(call sdist_file,compiler,stage2,main,ParsePkgConf,y) \
860 && $(call sdist_file,compiler,stage2,parser,HaddockLex,x) \
861 && $(call sdist_file,compiler,stage2,parser,HaddockParse,y) \
862 && $(call sdist_file,compiler,stage2,parser,Lexer,x) \
863 && $(call sdist_file,compiler,stage2,parser,Parser,y.pp) \
864 && $(call sdist_file,compiler,stage2,parser,ParserCore,y) \
865 && $(call sdist_file,utils/hpc,dist,,HpcParser,y) \
866 && $(call sdist_file,utils/genprimopcode,dist,,Lexer,x) \
867 && $(call sdist_file,utils/genprimopcode,dist,,Parser,y) \
868 && "$(RM)" $(RM_OPTS) -r compiler/stage[123] mk/build.mk \
869 && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | xargs "$(RM)" $(RM_OPTS) -r \
874 "$(TAR)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
876 sdist-manifest : $(SRC_DIST_TARBALL)
877 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
879 # Upload the distribution(s)
880 # Retrying is to work around buggy firewalls that corrupt large file transfers
882 ifneq "$(PublishLocation)" ""
884 $(call nTimes,10,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
887 ifeq "$(GhcUnregisterised)" "YES"
888 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
891 # -----------------------------------------------------------------------------
896 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
897 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
898 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
899 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
900 CLEAN_FILES += libraries/bootstrapping.conf
902 clean : clean_files clean_libraries
906 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
908 .PHONY: clean_libraries
909 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
910 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
913 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
914 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
916 # We have to define a clean target for each library manually, because the
917 # libraries/*/ghc.mk files are not included when we're cleaning.
918 ifeq "$(CLEANING)" "YES"
919 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
920 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
924 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
925 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
926 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
927 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
928 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
929 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
930 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
931 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
932 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
933 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
934 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
936 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
937 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
938 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
939 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
941 maintainer-clean : distclean
942 "$(RM)" $(RM_OPTS) configure mk/config.h.in
943 "$(RM)" $(RM_OPTS) -r autom4te.cache libraries/*/autom4te.cache
944 "$(RM)" $(RM_OPTS) ghc.spec
945 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
946 $(PACKAGES) $(PACKAGES_STAGE2))
947 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
948 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
949 $(PACKAGES) $(PACKAGES_STAGE2))
950 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
951 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
952 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
953 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
954 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
956 .PHONY: all_libraries
958 .PHONY: bootstrapping-files
959 bootstrapping-files: $(OTHER_LIBS)
960 bootstrapping-files: includes/ghcautoconf.h
961 bootstrapping-files: includes/DerivedConstants.h
962 bootstrapping-files: includes/GHCConstants.h