1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * remove old Makefiles, add new stubs for building in subdirs
17 # * docs/docbook-cheat-sheet/Makefile
18 # * docs/ext-core/Makefile
20 # * docs/storage-mgmt/Makefile
22 # * rts/dotnet/Makefile
24 # * add Makefiles for the rest of the utils/ programs that aren't built
25 # by default (need to exclude them from 'make all' too)
29 # * per-source-file dependencies instead of one .depend file?
30 # * eliminate undefined variables, and use --warn-undefined-variables?
31 # * put outputs from different ways in different subdirs of distdir/build,
32 # then we don't have to use -osuf/-hisuf. We would have to install
33 # them in different places too, so we'd need ghc-pkg support for packages
35 # * make PACKAGES generated by './configure' or './boot'?
36 # * we should use a directory of package.conf files rather than a single
37 # file for the inplace package database, so that we can express
38 # dependencies more accurately. Otherwise it's possible to get into
39 # a state where the package database is out of date, and the build
40 # system doesn't know.
42 # Approximate build order.
44 # The actual build order is defined by dependencies, and the phase
45 # ordering used to ensure correct ordering of makefile-generation; see
46 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
48 # * With bootstrapping compiler:
49 # o Build utils/ghc-cabal
50 # o Build utils/ghc-pkg
51 # o Build utils/hsc2hs
53 # o configure, generate package-data.mk and inplace-pkg-info
54 # o register each package into inplace/lib/package.conf
56 # * With bootstrapping compiler:
57 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
58 # o Build compiler (stage 1)
62 # o Build utils/* (except haddock)
63 # o Build compiler (stage 2)
65 # o Build utils/haddock
66 # o Build compiler (stage 3) (optional)
71 .PHONY: default all haddock
73 # We need second expansion for the way we handle directories, so that
75 # expands to the directory of a rule that uses a % pattern.
80 # Catch make if it runs away into an infinite loop
81 ifeq "$(MAKE_RESTARTS)" ""
82 else ifeq "$(MAKE_RESTARTS)" "1"
83 else ifeq "$(MAKE_RESTARTS)" "2"
85 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
88 # Just bring makefiles up to date:
89 .PHONY: just-makefiles
93 ifneq "$(CLEANING)" "YES"
97 # -----------------------------------------------------------------------------
101 space=$(nothing) $(nothing)
104 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
105 # by default, because that disables all the implicit rules, but there doesn't
106 # seem to be a good way to do that. This turns off all the old-style suffix
107 # rules, which does half the job and speeds up make quite a bit:
110 # -----------------------------------------------------------------------------
113 # to see the effective value used for a Makefile variable, do
114 # make show VALUE=MY_VALUE
118 @echo '$(VALUE)="$($(VALUE))"'
120 # -----------------------------------------------------------------------------
121 # Include subsidiary build-system bits
125 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
127 ifeq "$(ProjectVersion)" ""
128 $(error Please run ./configure first)
134 # (Optional) build-specific configuration
135 include mk/custom-settings.mk
137 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
138 ifeq "$(GhcLibWays)" ""
139 $(error $$(GhcLibWays) is empty, it must contain at least one way)
143 # -----------------------------------------------------------------------------
144 # Utility definitions
146 include rules/trace.mk
147 include rules/make-command.mk
149 # -----------------------------------------------------------------------------
150 # Macros for standard targets
152 include rules/all-target.mk
153 include rules/clean-target.mk
155 # -----------------------------------------------------------------------------
158 $(eval $(call clean-target,inplace,,inplace))
160 # -----------------------------------------------------------------------------
161 # Whether to build dependencies or not
163 # When we're just doing 'make clean' or 'make show', then we don't need
164 # to build dependencies.
166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
167 NO_INCLUDE_DEPS = YES
168 NO_INCLUDE_PKGDATA = YES
170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
171 NO_INCLUDE_DEPS = YES
172 NO_INCLUDE_PKGDATA = YES
174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
175 NO_INCLUDE_DEPS = YES
176 # We want package-data.mk for show
179 # -----------------------------------------------------------------------------
182 include rules/way-prelims.mk
184 $(foreach way,$(ALL_WAYS),\
185 $(eval $(call way-prelims,$(way))))
187 # -----------------------------------------------------------------------------
190 include rules/distdir-way-opts.mk
192 # -----------------------------------------------------------------------------
193 # Finding source files and object files
195 include rules/hs-sources.mk
196 include rules/c-sources.mk
197 include rules/includes-sources.mk
198 include rules/hs-objs.mk
199 include rules/c-objs.mk
200 include rules/cmm-objs.mk
202 # -----------------------------------------------------------------------------
205 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
206 # so we don't make any when cleaning.
207 ifneq "$(CLEANING)" "YES"
209 include rules/hs-suffix-rules-srcdir.mk
210 include rules/hs-suffix-rules.mk
211 include rules/hi-rule.mk
213 $(foreach way,$(ALL_WAYS),\
214 $(eval $(call hi-rule,$(way))))
216 include rules/c-suffix-rules.mk
217 include rules/cmm-suffix-rules.mk
221 # -----------------------------------------------------------------------------
222 # Building package-data.mk files from .cabal files
224 include rules/package-config.mk
226 # -----------------------------------------------------------------------------
227 # Building dependencies
229 include rules/build-dependencies.mk
231 # -----------------------------------------------------------------------------
232 # Build package-data.mk files
234 include rules/build-package-data.mk
236 # -----------------------------------------------------------------------------
237 # Build and install a program
239 include rules/build-prog.mk
240 include rules/shell-wrapper.mk
242 # -----------------------------------------------------------------------------
243 # Build a perl script
245 include rules/build-perl.mk
247 # -----------------------------------------------------------------------------
250 include rules/build-package.mk
251 include rules/build-package-way.mk
252 include rules/haddock.mk
253 include rules/tags-package.mk
254 include rules/extra-packages.mk
256 # -----------------------------------------------------------------------------
257 # Registering hand-written package descriptions (used in libffi and rts)
259 include rules/manual-package-config.mk
261 # -----------------------------------------------------------------------------
264 include rules/docbook.mk
266 # -----------------------------------------------------------------------------
269 include rules/bindist.mk
271 # -----------------------------------------------------------------------------
274 # Don't try to delete directories:
277 # Create build directories on demand. NB. the | below: this indicates
278 # that $(MKDIRHIER) is an order-only dependency, which means that this
279 # rule fires after building mkdirhier, but we won't try to recreate
280 # directories if mkdirhier changes.
284 # -----------------------------------------------------------------------------
287 # --------------------------------
288 # Properties of packages
289 # These lists say "if this package is built, here's a property it has"
290 # They do not say "this package will be built"; see $(PACKAGES_xx) for that
292 # Packages that are built but not installed
293 INTREE_ONLY_PACKAGES := haskeline mtl terminfo utf8-string xhtml
295 # Packages that, if present, must be built by the stage2 compiler,
296 # because they use TH and/or annotations, or depend on other stage2
298 STAGE2_PACKAGES := dph/dph-base dph/dph-prim-interface dph/dph-prim-seq \
299 dph/dph-common dph/dph-prim-par dph/dph-par dph/dph-seq \
302 # Packages that are built by stage0, in addition to stage1. These
303 # packages are dependencies of GHC, that we do not assume the stage0
304 # compiler already has installed (or up-to-date enough).
306 # We assume that the stage0 compiler has a suitable bytestring package,
307 # so we don't have to include it below.
308 STAGE0_PACKAGES = Cabal hpc extensible-exceptions binary bin-package-db
310 # These packages are installed, but are installed hidden
311 # Why install them at all? Because the 'ghc' package depends on them
312 HIDDEN_PACKAGES = binary
314 # $(EXTRA_PACKAGES) is another classification, of packages built but
316 # It is set in rules/extra-package.mk,
317 # by $(call extra-packages) a little further down
321 # --------------------------------
323 # The lists of packages that we *actually* going to build in each stage:
325 # $(STAGE0_PACKAGE) does double duty; it really is the list of packages
326 # we build the bootstrap compiler in stage 0
328 # $(PACKAGES) A list of directories relative to libraries/ containing
329 # packages that will be built by stage1, in dependency
332 # $(PACKAGES_STAGE2) Ditto, for stage2.
335 define addPackageGeneral
336 # args: $1 = PACKAGES variable, $2 = package, $3 = condition
340 ifeq "$$(CLEANING)" "YES"
350 define addPackage # args: $1 = package, $2 = condition
351 ifeq "$(filter $1,$(STAGE2_PACKAGES))" "$1"
352 $(call addPackageGeneral,PACKAGES_STAGE2,$1,$2)
354 $(call addPackageGeneral,PACKAGES,$1,$2)
358 $(eval $(call addPackage,ghc-prim))
359 ifeq "$(CLEANING)" "YES"
360 $(eval $(call addPackage,integer-gmp))
361 $(eval $(call addPackage,integer-simple))
363 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
365 $(eval $(call addPackage,base))
366 $(eval $(call addPackage,filepath))
367 $(eval $(call addPackage,array))
368 $(eval $(call addPackage,bytestring))
369 $(eval $(call addPackage,containers))
371 $(eval $(call addPackage,Win32,($$(Windows),YES)))
372 $(eval $(call addPackage,unix,($$(Windows),NO)))
374 $(eval $(call addPackage,old-locale))
375 $(eval $(call addPackage,old-time))
376 $(eval $(call addPackage,time))
377 $(eval $(call addPackage,directory))
378 $(eval $(call addPackage,process))
379 $(eval $(call addPackage,random))
380 $(eval $(call addPackage,extensible-exceptions))
381 $(eval $(call addPackage,haskell98))
382 $(eval $(call addPackage,haskell2010))
383 $(eval $(call addPackage,hpc))
384 $(eval $(call addPackage,pretty))
385 $(eval $(call addPackage,template-haskell))
386 $(eval $(call addPackage,Cabal))
387 $(eval $(call addPackage,binary))
388 $(eval $(call addPackage,bin-package-db))
389 $(eval $(call addPackage,mtl))
390 $(eval $(call addPackage,utf8-string))
391 $(eval $(call addPackage,xhtml))
392 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
393 $(eval $(call addPackage,haskeline))
395 $(eval $(call extra-packages))
397 # -------------------------------------------
398 # Dependencies between package-data.mk files
400 # We cannot run ghc-cabal to configure a package until we have
401 # configured and registered all of its dependencies. So the following
402 # hack forces all the configure steps to happen in exactly the following order:
404 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
406 # Ideally we should use the correct dependencies here to allow more
407 # parallelism, but we don't know the dependencies until we've
408 # generated the pacakge-data.mk files.
410 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
411 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
414 ifneq "$(BINDIST)" "YES"
416 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
418 # the GHC package doesn't live in libraries/, so we add its dependency manually:
419 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
420 fixed_pkg_prev:=compiler/stage2/package-data.mk
422 # and continue with PACKAGES_STAGE2, which depend on GHC:
423 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
425 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
426 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
427 # haddock depends on ghc and some libraries, but depending on GHC's
428 # package-data.mk is sufficient, as that in turn depends on all the
430 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
432 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
433 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
434 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
436 # add the final two package.conf dependencies: ghc-prim depends on RTS,
437 # and RTS depends on libffi.
438 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
439 rts/package.conf.inplace : libffi/package.conf.inplace
442 # --------------------------------
443 # Misc package-related settings
445 BOOT_PKG_CONSTRAINTS := $(foreach p,$(STAGE0_PACKAGES),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
447 # The actual .a and .so/.dll files: needed for dependencies.
448 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
449 ifeq "$(BuildSharedLibs)" "YES"
450 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
452 BOOT_LIBS = $(foreach lib,$(STAGE0_PACKAGES),$(libraries/$(lib)_dist-boot_v_LIB))
453 # A useful pseudo-target
455 stage1_libs : $(ALL_STAGE1_LIBS)
457 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
458 ifeq "$(BuildSharedLibs)" "YES"
459 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
462 # ----------------------------------------
463 # Special magic for the ghc-prim package
465 # We want the ghc-prim package to include the GHC.Prim module when it
466 # is registered, but not when it is built, because GHC.Prim is not a
467 # real source module, it is built-in to GHC. The old build system did
468 # this using Setup.hs, but we can't do that here, so we have a flag to
469 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
470 # remains compatible with the old build system for the time being).
471 # GHC.Prim module in the ghc-prim package with a flag:
473 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
475 # And then we strip it out again before building the package:
476 define libraries/ghc-prim_PACKAGE_MAGIC
477 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
480 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
482 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
483 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
485 # Required so that Haddock documents the primops.
486 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
488 # ----------------------------------------
489 # Special magic for the integer package
491 ifneq "$(CLEANING)" "YES"
492 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
493 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
495 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
496 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
498 $(error Unknown integer library: $(INTEGER_LIBRARY))
503 # ----------------------------------------------
504 # Checking packages with 'cabal check'
506 ifeq "$(CHECK_PACKAGES)" "YES"
510 # These packages don't pass the Cabal checks because hs-source-dirs
511 # points outside the source directory. This isn't a real problem in
512 # these cases, so we just skip checking them.
513 # NB. these must come before we include the ghc.mk files below, because
514 # they disable the relevant rules.
515 CHECKED_libraries/dph/dph-seq = YES
516 CHECKED_libraries/dph/dph-par = YES
517 # In compiler's case, include-dirs points outside of the source tree
518 CHECKED_compiler = YES
520 # -----------------------------------------------------------------------------
521 # Include build instructions from all subdirs
523 # For the rationale behind the build phases, see
524 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
526 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
527 # "dist", just read the package-data.mk file, do not build anything".
529 # We carefully engineer things so that we can build the
530 # package-data.mk files early on: they depend only on a few tools also
531 # built early. Having got the package-data.mk files built, we can
532 # restart make with up-to-date information about all the packages
533 # (this is phase 0). The remaining problem is the .depend files:
535 # - .depend files in libraries need the stage 1 compiler to build
536 # - ghc/stage1/.depend needs compiler/stage1 built
537 # - compiler/stage1/.depend needs the bootstrap libs built
539 # GHC 6.11+ can build a .depend file without having built the
540 # dependencies of the package, but we can't rely on the bootstrapping
541 # compiler being able to do this, which is why we have to separate the
542 # three phases above.
544 # So this is the final ordering:
546 # Phase 0 : all package-data.mk files
547 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
548 # Phase 1 : .depend files for bootstrap libs
550 # Phase 2 : compiler/stage1/.depend
551 # (requires bootstrap libs and genprimopcode)
552 # Phase 3 : ghc/stage1/.depend
553 # (requires compiler/stage1)
555 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
557 ifneq "$(BINDIST)" "YES"
566 libraries/Cabal/doc \
570 ifneq "$(GhcUnregisterised)" "YES"
576 ifneq "$(BINDIST)" "YES"
590 ifneq "$(BINDIST)" "YES"
601 ifneq "$(CLEANING)" "YES"
603 $(patsubst %, libraries/%, $(PACKAGES))
606 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
607 BUILD_DIRS += libraries/integer-gmp/gmp
619 ifeq "$(Windows)" "YES"
624 ifneq "$(BINDIST)" "YES"
626 utils/mkUserGuidePart
629 BUILD_DIRS += utils/count_lines
630 BUILD_DIRS += utils/compare_sizes
632 ifneq "$(CLEANING)" "YES"
633 # After compiler/, because these packages depend on it
635 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
638 # XXX libraries/% must come before any programs built with stage1, see
639 # Note [lib-depends].
642 $(foreach lib,$(STAGE0_PACKAGES),$(eval \
643 libraries/$(lib)_dist-boot_DISABLE = YES))
646 ifneq "$(findstring $(phase),0 1)" ""
647 # We can build deps for compiler/stage1 in phase 2
648 compiler_stage1_DISABLE = YES
651 ifneq "$(findstring $(phase),0 1 2)" ""
652 ghc_stage1_DISABLE = YES
655 ifneq "$(findstring $(phase),0 1 2 3)" ""
656 # In phases 0-3, we disable stage2-3, the full libraries and haddock
657 utils/haddock_dist_DISABLE = YES
658 utils/runghc_dist_DISABLE = YES
659 utils/ghctags_dist_DISABLE = YES
660 utils/hpc_dist_DISABLE = YES
661 utils/hsc2hs_dist-install_DISABLE = YES
662 utils/ghc-pkg_dist-install_DISABLE = YES
663 utils/mkUserGuidePart_dist_DISABLE = YES
664 utils/compare_sizes_dist_DISABLE = YES
665 compiler_stage2_DISABLE = YES
666 compiler_stage3_DISABLE = YES
667 ghc_stage2_DISABLE = YES
668 ghc_stage3_DISABLE = YES
669 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
670 libraries/$(lib)_dist-install_DISABLE = YES))
673 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
675 # ----------------------------------------------
676 # Per-package compiler flags
678 # If you want to add per-package compiler flags, this
679 # is the place to do it. Do it like this for package <pkg>
681 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
682 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
684 # Add $(GhcLibHcOpts) to all package builds
685 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
687 # Add $(GhcBootLibHcOpts) to all stage0 package builds
688 $(foreach pkg,$(STAGE0_PACKAGES),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
690 # -----------------------------------------------
691 # Haddock-related bits
693 # Don't run Haddock for the package that will not be installed
694 $(foreach p,$(INTREE_ONLY_PACKAGES),$(eval libraries/$p_dist-install_DO_HADDOCK = NO))
695 # We don't haddock the bootstrapping libraries
696 $(foreach p,$(STAGE0_PACKAGES),$(eval libraries/$p_dist-boot_DO_HADDOCK = NO))
698 # Build the Haddock contents and index
699 ifeq "$(HADDOCK_DOCS)" "YES"
700 libraries/index.html: $(ALL_HADDOCK_FILES)
701 cd libraries && sh gen_contents_index --inplace
702 $(eval $(call all-target,library_doc_index,libraries/index.html))
703 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
704 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
705 libraries/haddock*.js libraries/index*.html libraries/*.gif
708 # -----------------------------------------------------------------------------
709 # Bootstrapping libraries
711 # We need to build a few libraries with the installed GHC, since GHC itself
712 # and some of the tools depend on them:
714 ifneq "$(BINDIST)" "YES"
716 ifneq "$(BOOTSTRAPPING_CONF)" ""
717 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
718 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
722 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
724 # These three libraries do not depend on each other, so we can build
727 $(eval $(call build-package,libraries/hpc,dist-boot,0))
728 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
729 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
730 $(eval $(call build-package,libraries/binary,dist-boot,0))
731 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
733 # register the boot packages in strict sequence, because running
734 # multiple ghc-pkgs in parallel doesn't work (registrations may get
737 $(foreach pkg,$(STAGE0_PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
739 compiler/stage1/package-data.mk : \
740 libraries/Cabal/dist-boot/package-data.mk \
741 libraries/hpc/dist-boot/package-data.mk \
742 libraries/extensible-exceptions/dist-boot/package-data.mk \
743 libraries/bin-package-db/dist-boot/package-data.mk
745 # These are necessary because the bootstrapping compiler may not know
746 # about cross-package dependencies:
747 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
748 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
750 # A few careful dependencies between bootstrapping packages. When we
751 # can rely on the stage 0 compiler being able to generate
752 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
753 # these, and also some of the phases.
755 # If you miss any out here, then 'make -j8' will probably tell you.
757 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
759 # Make sure we have all the GHCi libs by the time we've built
760 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
761 # GHCI libs, and we don't have a better way to express that dependency.
763 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
764 $(compiler_stage2_GHCI_LIB)
766 ifeq "$(UseArchivesForGhci)" "NO"
767 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
770 # Deps for TH uses in libraries
771 $(foreach way, $(GhcLibWays),$(eval \
772 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
773 $(libraries/primitive_dist-install_dyn_LIB) \
777 # -----------------------------------------------------------------------------
778 # Creating a local mingw copy on Windows
780 ifeq "$(Windows)" "YES"
782 install : install_mingw
783 .PHONY: install_mingw
784 install_mingw : $(INPLACE_MINGW)
785 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
787 install : install_perl
789 install_perl : $(INPLACE_PERL)
790 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
794 ifneq "$(BINDIST)" "YES"
795 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
796 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
797 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
800 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
801 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
803 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
805 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
806 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
808 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
816 # -----------------------------------------------------------------------------
819 install: install_packages install_libs install_libexecs install_headers \
820 install_libexec_scripts install_bins install_topdirs
821 ifeq "$(HADDOCK_DOCS)" "YES"
822 install: install_docs
825 install_bins: $(INSTALL_BINS)
826 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
827 for i in $(INSTALL_BINS); do \
828 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
831 install_libs: $(INSTALL_LIBS)
832 $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
833 for i in $(INSTALL_LIBS); do \
836 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
837 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
839 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
841 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
843 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
845 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
849 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
850 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
853 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
854 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
855 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
859 install_libexecs: $(INSTALL_LIBEXECS)
860 ifeq "$(INSTALL_LIBEXECS)" ""
863 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
864 for i in $(INSTALL_LIBEXECS); do \
865 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
867 # We rename ghc-stage2, so that the right program name is used in error
869 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
872 install_topdirs: $(INSTALL_TOPDIRS)
873 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
874 for i in $(INSTALL_TOPDIRS); do \
875 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
878 install_headers: $(INSTALL_HEADERS)
879 $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
880 for i in $(INSTALL_HEADERS); do \
881 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
884 install_docs: $(INSTALL_DOCS)
885 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
886 ifneq "$(INSTALL_DOCS)" ""
887 for i in $(INSTALL_DOCS); do \
888 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
891 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
892 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
893 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
894 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
895 for i in $(INSTALL_LIBRARY_DOCS); do \
896 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
898 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
899 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
901 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
902 for i in $(INSTALL_HTML_DOC_DIRS); do \
903 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
904 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
908 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
910 # Install packages in the right order, so that ghc-pkg doesn't complain.
911 # Also, install ghc-pkg first.
912 ifeq "$(Windows)" "NO"
913 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
914 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
916 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
917 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
920 INSTALLED_PKG_DIRS := $(addprefix libraries/,$(PACKAGES)) \
922 $(addprefix libraries/,$(PACKAGES_STAGE2))
923 ifeq "$(InstallExtraPackages)" "NO"
924 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(EXTRA_PACKAGES)),\
925 $(INSTALLED_PKG_DIRS))
927 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(INTREE_ONLY_PACKAGES)),\
928 $(INSTALLED_PKG_DIRS))
930 # Set the INSTALL_DISTDIR_p for each package; compiler is special
931 $(foreach p,$(filter-out compiler,$(INSTALLED_PKG_DIRS)),\
932 $(eval INSTALL_DISTDIR_$p = dist-install))
933 INSTALL_DISTDIR_compiler = stage2
935 # Now we can do the installation
936 install_packages: install_libexecs
937 install_packages: libffi/package.conf.install rts/package.conf.install
938 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
939 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
940 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
941 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
942 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
943 $(foreach p, $(INSTALLED_PKG_DIRS), \
944 $(call make-command, \
945 "$(GHC_CABAL_INPLACE)" install \
946 "$(INSTALLED_GHC_REAL)" \
947 "$(INSTALLED_GHC_PKG_REAL)" \
949 "$(DESTDIR)$(topdir)" \
950 $p $(INSTALL_DISTDIR_$p) \
954 '$(docdir)/html/libraries' \
955 $(RelocatableBuild)))
956 $(foreach p, $(HIDDEN_PACKAGES), \
957 $(call make-command, \
958 "$(INSTALLED_GHC_PKG_REAL)" \
959 --global-conf "$(INSTALLED_PACKAGE_CONF)" hide $p))
961 # -----------------------------------------------------------------------------
962 # Binary distributions
964 ifneq "$(CLEANING)" "YES"
965 # This rule seems to hold some files open on Windows which prevents
966 # cleaning, perhaps due to the $(wildcard).
968 $(eval $(call bindist,.,\
972 configure config.sub config.guess install-sh \
977 $(INPLACE_BIN)/mkdirhier \
978 $(INPLACE_BIN)/ghc-cabal \
979 utils/ghc-pwd/ghc-pwd \
980 $(BINDIST_WRAPPERS) \
981 $(BINDIST_PERL_SOURCES) \
985 $(includes_H_CONFIG) \
986 $(includes_H_PLATFORM) \
987 $(includes_H_FILES) \
988 includes/ghcconfig.h \
989 includes/rts/Config.h \
991 $(INSTALL_LIBEXECS) \
992 $(INSTALL_LIBEXEC_SCRIPTS) \
995 $(INSTALL_MANPAGES) \
997 $(INSTALL_LIBRARY_DOCS) \
998 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
1000 compiler/stage2/doc \
1001 $(wildcard libraries/*/dist-install/doc/) \
1002 $(wildcard libraries/*/*/dist-install/doc/) \
1003 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
1004 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
1008 libraries/gen_contents_index \
1009 libraries/prologue.txt \
1010 libraries/dph/LICENSE \
1011 libraries/dph/ghc-packages \
1012 libraries/dph/ghc-packages2 \
1013 libraries/dph/ghc-stage2-package \
1016 # mk/project.mk gets an absolute path, so we manually include it in
1017 # the bindist with a relative path
1019 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1021 unix-binary-dist-prep:
1022 "$(RM)" $(RM_OPTS_REC) bindistprep/
1023 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1024 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1025 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1026 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
1027 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
1028 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
1029 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
1030 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1031 cd $(BIN_DIST_PREP_DIR) && autoreconf
1032 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
1033 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1034 # tree then we want to include the real file, not a symlink to it
1035 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1037 windows-binary-dist-prep:
1038 "$(RM)" $(RM_OPTS_REC) bindistprep/
1039 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1040 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1043 ifeq "$(ISCC_CMD)" ""
1044 @echo No ISCC_CMD, so not making installer
1046 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1049 # tryTimes tries to run its third argument multiple times, until it
1050 # succeeds. Don't call it directly; call try10Times instead.
1051 # The first and second argument to tryTimes are lists of values.
1052 # The length of the first argument is the number of times we have
1053 # already tried. The length of the second argument is the number more
1054 # times we will try.
1055 tryTimes = $(if $2, \
1056 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1057 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1060 # Try to run the argument 10 times. If all 10 fail, fail.
1061 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1063 .PHONY: publish-binary-dist
1064 publish-binary-dist:
1065 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1066 ifeq "$(mingw32_TARGET_OS)" "1"
1067 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1070 .PHONY: publish-docs
1072 $(call try10Times,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
1074 # -----------------------------------------------------------------------------
1075 # Source distributions
1083 # A source dist is built from a complete build tree, because we
1084 # require some extra files not contained in a darcs checkout: the
1085 # output from Happy and Alex, for example.
1087 # The steps performed by 'make dist' are as follows:
1088 # - create a complete link-tree of the current build tree in /tmp
1089 # - run 'make distclean' on that tree
1090 # - remove a bunch of other files that we know shouldn't be in the dist
1091 # - tar up first the extralibs package, then the main source package
1094 # Directory in which we're going to build the src dist
1096 SRC_DIST_NAME=ghc-$(ProjectVersion)
1097 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1100 # Files to include in source distributions
1102 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1104 configure.ac config.guess config.sub configure \
1105 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1106 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1107 boot boot-pkgs packages ghc.mk
1109 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1112 echo $(ProjectVersion) >VERSION
1117 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1118 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1119 # "stage2" is the dist dir.
1121 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1122 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1127 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1128 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1129 mkdir $(SRC_DIST_DIR)
1130 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1131 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1132 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1133 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1134 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1135 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1136 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1137 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1138 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1139 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1140 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1141 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1142 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1143 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1144 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1145 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1146 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1150 "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1152 sdist-manifest : $(SRC_DIST_TARBALL)
1153 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1155 # Upload the distribution(s)
1156 # Retrying is to work around buggy firewalls that corrupt large file transfers
1158 ifneq "$(PublishLocation)" ""
1160 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1163 ifeq "$(BootingFromHc)" "YES"
1164 # In a normal build we use GHC to compile C files (see
1165 # rules/c-suffix-rules.mk), which passes a number of its own options
1166 # to the C compiler. So when bootstrapping we have to provide these
1167 # flags explicitly to C compilations.
1168 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1169 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1170 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1173 # -----------------------------------------------------------------------------
1174 # sdisting libraries
1176 # Use manually, with e.g.:
1177 # make sdist_directory
1180 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1182 # -----------------------------------------------------------------------------
1187 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1188 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1189 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1190 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1191 CLEAN_FILES += libraries/bootstrapping.conf
1192 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1193 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1195 clean : clean_files clean_libraries
1199 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1201 ifneq "$(NO_CLEAN_GMP)" "YES"
1202 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1203 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1208 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1209 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1212 .PHONY: clean_libraries
1213 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1214 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(STAGE0_PACKAGES))
1217 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1218 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1220 # We have to define a clean target for each library manually, because the
1221 # libraries/*/ghc.mk files are not included when we're cleaning.
1222 ifeq "$(CLEANING)" "YES"
1223 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1224 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1227 clean : clean_bindistprep
1228 .PHONY: clean_bindistprep
1230 "$(RM)" $(RM_OPTS_REC) bindistprep/
1233 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1234 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1235 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1236 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1237 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1238 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1239 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1240 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1241 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1242 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1243 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1245 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1246 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1247 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1248 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1250 maintainer-clean : distclean
1251 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1252 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1253 "$(RM)" $(RM_OPTS) ghc.spec
1254 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1255 $(PACKAGES) $(PACKAGES_STAGE2))
1256 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1257 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1258 $(PACKAGES) $(PACKAGES_STAGE2))
1259 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1260 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1261 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1262 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1263 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1265 .PHONY: all_libraries
1267 .PHONY: bootstrapping-files
1268 bootstrapping-files: $(OTHER_LIBS)
1269 bootstrapping-files: includes/ghcautoconf.h
1270 bootstrapping-files: includes/DerivedConstants.h
1271 bootstrapping-files: includes/GHCConstants.h