1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * remove old Makefiles, add new stubs for building in subdirs
17 # * docs/docbook-cheat-sheet/Makefile
18 # * docs/ext-core/Makefile
20 # * docs/storage-mgmt/Makefile
22 # * rts/dotnet/Makefile
24 # * add Makefiles for the rest of the utils/ programs that aren't built
25 # by default (need to exclude them from 'make all' too)
29 # * per-source-file dependencies instead of one .depend file?
30 # * eliminate undefined variables, and use --warn-undefined-variables?
31 # * put outputs from different ways in different subdirs of distdir/build,
32 # then we don't have to use -osuf/-hisuf. We would have to install
33 # them in different places too, so we'd need ghc-pkg support for packages
35 # * make PACKAGES generated by './configure' or './boot'?
36 # * we should use a directory of package.conf files rather than a single
37 # file for the inplace package database, so that we can express
38 # dependencies more accurately. Otherwise it's possible to get into
39 # a state where the package database is out of date, and the build
40 # system doesn't know.
42 # Approximate build order.
44 # The actual build order is defined by dependencies, and the phase
45 # ordering used to ensure correct ordering of makefile-generation; see
46 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
48 # * With bootstrapping compiler:
49 # o Build utils/ghc-cabal
50 # o Build utils/ghc-pkg
51 # o Build utils/hsc2hs
53 # o configure, generate package-data.mk and inplace-pkg-info
54 # o register each package into inplace/lib/package.conf
56 # * With bootstrapping compiler:
57 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
58 # o Build compiler (stage 1)
62 # o Build utils/* (except haddock)
63 # o Build compiler (stage 2)
65 # o Build utils/haddock
66 # o Build compiler (stage 3) (optional)
71 .PHONY: default all haddock
73 # We need second expansion for the way we handle directories, so that
75 # expands to the directory of a rule that uses a % pattern.
80 # Catch make if it runs away into an infinite loop
81 ifeq "$(MAKE_RESTARTS)" ""
82 else ifeq "$(MAKE_RESTARTS)" "1"
83 else ifeq "$(MAKE_RESTARTS)" "2"
85 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
88 # Just bring makefiles up to date:
89 .PHONY: just-makefiles
93 ifneq "$(CLEANING)" "YES"
97 # -----------------------------------------------------------------------------
101 space=$(nothing) $(nothing)
104 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
105 # by default, because that disables all the implicit rules, but there doesn't
106 # seem to be a good way to do that. This turns off all the old-style suffix
107 # rules, which does half the job and speeds up make quite a bit:
110 # -----------------------------------------------------------------------------
113 # to see the effective value used for a Makefile variable, do
114 # make show VALUE=MY_VALUE
118 @echo '$(VALUE)="$($(VALUE))"'
120 # -----------------------------------------------------------------------------
121 # Include subsidiary build-system bits
125 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
127 ifeq "$(ProjectVersion)" ""
128 $(error Please run ./configure first)
134 # (Optional) build-specific configuration
135 include mk/custom-settings.mk
137 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
138 ifeq "$(GhcLibWays)" ""
139 $(error $$(GhcLibWays) is empty, it must contain at least one way)
143 # -----------------------------------------------------------------------------
144 # Utility definitions
146 include rules/trace.mk
147 include rules/make-command.mk
149 # -----------------------------------------------------------------------------
150 # Macros for standard targets
152 include rules/all-target.mk
153 include rules/clean-target.mk
155 # -----------------------------------------------------------------------------
158 $(eval $(call clean-target,inplace,,inplace))
160 # -----------------------------------------------------------------------------
161 # Whether to build dependencies or not
163 # When we're just doing 'make clean' or 'make show', then we don't need
164 # to build dependencies.
166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
167 NO_INCLUDE_DEPS = YES
168 NO_INCLUDE_PKGDATA = YES
170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
171 NO_INCLUDE_DEPS = YES
172 NO_INCLUDE_PKGDATA = YES
174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
175 NO_INCLUDE_DEPS = YES
176 # We want package-data.mk for show
179 # -----------------------------------------------------------------------------
182 include rules/way-prelims.mk
184 $(foreach way,$(ALL_WAYS),\
185 $(eval $(call way-prelims,$(way))))
187 # -----------------------------------------------------------------------------
190 include rules/distdir-way-opts.mk
192 # -----------------------------------------------------------------------------
193 # Finding source files and object files
195 include rules/hs-sources.mk
196 include rules/c-sources.mk
197 include rules/includes-sources.mk
198 include rules/hs-objs.mk
199 include rules/c-objs.mk
200 include rules/cmm-objs.mk
202 # -----------------------------------------------------------------------------
205 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
206 # so we don't make any when cleaning.
207 ifneq "$(CLEANING)" "YES"
209 include rules/hs-suffix-rules-srcdir.mk
210 include rules/hs-suffix-rules.mk
211 include rules/hi-rule.mk
213 $(foreach way,$(ALL_WAYS),\
214 $(eval $(call hi-rule,$(way))))
216 include rules/c-suffix-rules.mk
217 include rules/cmm-suffix-rules.mk
221 # -----------------------------------------------------------------------------
222 # Building package-data.mk files from .cabal files
224 include rules/package-config.mk
226 # -----------------------------------------------------------------------------
227 # Building dependencies
229 include rules/build-dependencies.mk
231 # -----------------------------------------------------------------------------
232 # Build package-data.mk files
234 include rules/build-package-data.mk
236 # -----------------------------------------------------------------------------
237 # Build and install a program
239 include rules/build-prog.mk
240 include rules/shell-wrapper.mk
242 # -----------------------------------------------------------------------------
243 # Build a perl script
245 include rules/build-perl.mk
247 # -----------------------------------------------------------------------------
250 include rules/build-package.mk
251 include rules/build-package-way.mk
252 include rules/haddock.mk
253 include rules/tags-package.mk
254 include rules/extra-packages.mk
256 # -----------------------------------------------------------------------------
257 # Registering hand-written package descriptions (used in libffi and rts)
259 include rules/manual-package-config.mk
261 # -----------------------------------------------------------------------------
264 include rules/docbook.mk
266 # -----------------------------------------------------------------------------
269 include rules/bindist.mk
271 # -----------------------------------------------------------------------------
274 # Don't try to delete directories:
277 # Create build directories on demand. NB. the | below: this indicates
278 # that $(MKDIRHIER) is an order-only dependency, which means that this
279 # rule fires after building mkdirhier, but we won't try to recreate
280 # directories if mkdirhier changes.
284 # -----------------------------------------------------------------------------
287 # --------------------------------
288 # Properties of packages
289 # These lists say "if this package is built, here's a property it has"
290 # They do not say "this package will be built"; see $(PACKAGES_xx) for that
292 # Packages that are built but not installed
293 INTREE_ONLY_PACKAGES := haskeline mtl terminfo utf8-string xhtml
295 DPH_PACKAGES := dph/dph-base dph/dph-prim-interface dph/dph-prim-seq \
296 dph/dph-common dph/dph-prim-par dph/dph-par dph/dph-seq \
299 # Packages that, if present, must be built by the stage2 compiler,
300 # because they use TH and/or annotations, or depend on other stage2
302 STAGE2_PACKAGES := $(DPH_PACKAGES) haskell98 haskell2010
303 # Packages that we shouldn't build if we don't have TH (e.g. because
304 # we're building a profiled compiler):
305 TH_PACKAGES := $(DPH_PACKAGES)
307 # Packages that are built by stage0, in addition to stage1. These
308 # packages are dependencies of GHC, that we do not assume the stage0
309 # compiler already has installed (or up-to-date enough).
311 # We assume that the stage0 compiler has a suitable bytestring package,
312 # so we don't have to include it below.
313 STAGE0_PACKAGES = Cabal hpc extensible-exceptions binary bin-package-db
315 # These packages are installed, but are installed hidden
316 # Why install them at all? Because the 'ghc' package depends on them
317 HIDDEN_PACKAGES = binary
319 # $(EXTRA_PACKAGES) is another classification, of packages built but
321 # It is set in rules/extra-package.mk,
322 # by $(call extra-packages) a little further down
326 # --------------------------------
328 # The lists of packages that we *actually* going to build in each stage:
330 # $(STAGE0_PACKAGE) does double duty; it really is the list of packages
331 # we build the bootstrap compiler in stage 0
333 # $(PACKAGES) A list of directories relative to libraries/ containing
334 # packages that will be built by stage1, in dependency
337 # $(PACKAGES_STAGE2) Ditto, for stage2.
340 define addPackageGeneral
341 # args: $1 = PACKAGES variable, $2 = package, $3 = condition
345 ifeq "$$(CLEANING)" "YES"
355 define addPackage # args: $1 = package, $2 = condition
356 ifneq "$(filter $1,$(TH_PACKAGES)) $(GhcProfiled)" "$1 YES"
357 ifeq "$(filter $1,$(STAGE2_PACKAGES))" "$1"
358 $(call addPackageGeneral,PACKAGES_STAGE2,$1,$2)
360 $(call addPackageGeneral,PACKAGES,$1,$2)
365 $(eval $(call addPackage,ghc-prim))
366 ifeq "$(CLEANING)" "YES"
367 $(eval $(call addPackage,integer-gmp))
368 $(eval $(call addPackage,integer-simple))
370 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
372 $(eval $(call addPackage,base))
373 $(eval $(call addPackage,filepath))
374 $(eval $(call addPackage,array))
375 $(eval $(call addPackage,bytestring))
376 $(eval $(call addPackage,containers))
378 $(eval $(call addPackage,Win32,($$(Windows),YES)))
379 $(eval $(call addPackage,unix,($$(Windows),NO)))
381 $(eval $(call addPackage,old-locale))
382 $(eval $(call addPackage,old-time))
383 $(eval $(call addPackage,time))
384 $(eval $(call addPackage,directory))
385 $(eval $(call addPackage,process))
386 $(eval $(call addPackage,random))
387 $(eval $(call addPackage,extensible-exceptions))
388 $(eval $(call addPackage,haskell98))
389 $(eval $(call addPackage,haskell2010))
390 $(eval $(call addPackage,hpc))
391 $(eval $(call addPackage,pretty))
392 $(eval $(call addPackage,template-haskell))
393 $(eval $(call addPackage,Cabal))
394 $(eval $(call addPackage,binary))
395 $(eval $(call addPackage,bin-package-db))
396 $(eval $(call addPackage,mtl))
397 $(eval $(call addPackage,utf8-string))
398 $(eval $(call addPackage,xhtml))
399 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
400 $(eval $(call addPackage,haskeline))
402 $(eval $(call extra-packages))
404 # -------------------------------------------
405 # Dependencies between package-data.mk files
407 # We cannot run ghc-cabal to configure a package until we have
408 # configured and registered all of its dependencies. So the following
409 # hack forces all the configure steps to happen in exactly the following order:
411 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
413 # Ideally we should use the correct dependencies here to allow more
414 # parallelism, but we don't know the dependencies until we've
415 # generated the pacakge-data.mk files.
417 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
418 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
421 ifneq "$(BINDIST)" "YES"
423 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
425 # the GHC package doesn't live in libraries/, so we add its dependency manually:
426 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
427 fixed_pkg_prev:=compiler/stage2/package-data.mk
429 # and continue with PACKAGES_STAGE2, which depend on GHC:
430 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
432 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
433 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
434 # haddock depends on ghc and some libraries, but depending on GHC's
435 # package-data.mk is sufficient, as that in turn depends on all the
437 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
439 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
440 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
441 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
442 utils/runghc/dist/package-data.mk: compiler/stage2/package-data.mk
444 # add the final two package.conf dependencies: ghc-prim depends on RTS,
445 # and RTS depends on libffi.
446 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
447 rts/package.conf.inplace : libffi/package.conf.inplace
450 # --------------------------------
451 # Misc package-related settings
453 BOOT_PKG_CONSTRAINTS := $(foreach p,$(STAGE0_PACKAGES),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
455 # The actual .a and .so/.dll files: needed for dependencies.
456 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
457 ifeq "$(BuildSharedLibs)" "YES"
458 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
460 BOOT_LIBS = $(foreach lib,$(STAGE0_PACKAGES),$(libraries/$(lib)_dist-boot_v_LIB))
462 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
463 ifeq "$(BuildSharedLibs)" "YES"
464 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
467 # ----------------------------------------
468 # Special magic for the ghc-prim package
470 # We want the ghc-prim package to include the GHC.Prim module when it
471 # is registered, but not when it is built, because GHC.Prim is not a
472 # real source module, it is built-in to GHC. The old build system did
473 # this using Setup.hs, but we can't do that here, so we have a flag to
474 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
475 # remains compatible with the old build system for the time being).
476 # GHC.Prim module in the ghc-prim package with a flag:
478 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
480 # And then we strip it out again before building the package:
481 define libraries/ghc-prim_PACKAGE_MAGIC
482 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
485 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
487 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
488 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
490 # Required so that Haddock documents the primops.
491 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
493 # ----------------------------------------
494 # Special magic for the integer package
496 ifneq "$(CLEANING)" "YES"
497 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
498 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
500 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
501 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
503 $(error Unknown integer library: $(INTEGER_LIBRARY))
508 # ----------------------------------------------
509 # Checking packages with 'cabal check'
511 ifeq "$(CHECK_PACKAGES)" "YES"
515 # These packages don't pass the Cabal checks because hs-source-dirs
516 # points outside the source directory. This isn't a real problem in
517 # these cases, so we just skip checking them.
518 # NB. these must come before we include the ghc.mk files below, because
519 # they disable the relevant rules.
520 CHECKED_libraries/dph/dph-seq = YES
521 CHECKED_libraries/dph/dph-par = YES
522 # In compiler's case, include-dirs points outside of the source tree
523 CHECKED_compiler = YES
525 # -----------------------------------------------------------------------------
526 # Include build instructions from all subdirs
528 # For the rationale behind the build phases, see
529 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
531 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
532 # "dist", just read the package-data.mk file, do not build anything".
534 # We carefully engineer things so that we can build the
535 # package-data.mk files early on: they depend only on a few tools also
536 # built early. Having got the package-data.mk files built, we can
537 # restart make with up-to-date information about all the packages
538 # (this is phase 0). The remaining problem is the .depend files:
540 # - .depend files in libraries need the stage 1 compiler to build
541 # - ghc/stage1/.depend needs compiler/stage1 built
542 # - compiler/stage1/.depend needs the bootstrap libs built
544 # GHC 6.11+ can build a .depend file without having built the
545 # dependencies of the package, but we can't rely on the bootstrapping
546 # compiler being able to do this, which is why we have to separate the
547 # three phases above.
549 # So this is the final ordering:
551 # Phase 0 : all package-data.mk files
552 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
553 # Phase 1 : .depend files for bootstrap libs
555 # Phase 2 : compiler/stage1/.depend
556 # (requires bootstrap libs and genprimopcode)
557 # Phase 3 : ghc/stage1/.depend
558 # (requires compiler/stage1)
560 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
562 ifneq "$(BINDIST)" "YES"
574 ifneq "$(GhcUnregisterised)" "YES"
580 ifneq "$(BINDIST)" "YES"
594 ifneq "$(BINDIST)" "YES"
605 ifneq "$(CLEANING)" "YES"
607 $(patsubst %, libraries/%, $(PACKAGES))
610 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
611 BUILD_DIRS += libraries/integer-gmp/gmp
623 ifeq "$(Windows)" "YES"
628 ifneq "$(BINDIST)" "YES"
630 utils/mkUserGuidePart
633 BUILD_DIRS += utils/count_lines
634 BUILD_DIRS += utils/compare_sizes
636 ifneq "$(CLEANING)" "YES"
637 # After compiler/, because these packages depend on it
639 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
642 # XXX libraries/% must come before any programs built with stage1, see
643 # Note [lib-depends].
646 $(foreach lib,$(STAGE0_PACKAGES),$(eval \
647 libraries/$(lib)_dist-boot_DISABLE = YES))
650 ifneq "$(findstring $(phase),0 1)" ""
651 # We can build deps for compiler/stage1 in phase 2
652 compiler_stage1_DISABLE = YES
655 ifneq "$(findstring $(phase),0 1 2)" ""
656 ghc_stage1_DISABLE = YES
659 ifneq "$(findstring $(phase),0 1 2 3)" ""
660 # In phases 0-3, we disable stage2-3, the full libraries and haddock
661 utils/haddock_dist_DISABLE = YES
662 utils/runghc_dist_DISABLE = YES
663 utils/ghctags_dist_DISABLE = YES
664 utils/hpc_dist_DISABLE = YES
665 utils/hsc2hs_dist-install_DISABLE = YES
666 utils/ghc-pkg_dist-install_DISABLE = YES
667 utils/mkUserGuidePart_dist_DISABLE = YES
668 utils/compare_sizes_dist_DISABLE = YES
669 compiler_stage2_DISABLE = YES
670 compiler_stage3_DISABLE = YES
671 ghc_stage2_DISABLE = YES
672 ghc_stage3_DISABLE = YES
673 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
674 libraries/$(lib)_dist-install_DISABLE = YES))
677 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
679 # A useful pseudo-target (must be after the include above, because it needs
680 # the value of things like $(libraries/base_dist-install_v_LIB).
682 stage1_libs : $(ALL_STAGE1_LIBS)
684 # ----------------------------------------------
685 # Per-package compiler flags
687 # If you want to add per-package compiler flags, this
688 # is the place to do it. Do it like this for package <pkg>
690 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
691 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
693 # Add $(GhcLibHcOpts) to all package builds
694 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
696 # Add $(GhcBootLibHcOpts) to all stage0 package builds
697 $(foreach pkg,$(STAGE0_PACKAGES),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
699 # -----------------------------------------------
700 # Haddock-related bits
702 # Don't run Haddock for the package that will not be installed
703 $(foreach p,$(INTREE_ONLY_PACKAGES),$(eval libraries/$p_dist-install_DO_HADDOCK = NO))
704 # We don't haddock the bootstrapping libraries
705 $(foreach p,$(STAGE0_PACKAGES),$(eval libraries/$p_dist-boot_DO_HADDOCK = NO))
707 # Build the Haddock contents and index
708 ifeq "$(HADDOCK_DOCS)" "YES"
709 libraries/index.html: $(ALL_HADDOCK_FILES)
710 cd libraries && sh gen_contents_index --inplace
711 $(eval $(call all-target,library_doc_index,libraries/index.html))
712 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
713 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
714 libraries/haddock*.js libraries/index*.html libraries/*.gif
717 # -----------------------------------------------------------------------------
718 # Bootstrapping libraries
720 # We need to build a few libraries with the installed GHC, since GHC itself
721 # and some of the tools depend on them:
723 ifneq "$(BINDIST)" "YES"
725 ifneq "$(BOOTSTRAPPING_CONF)" ""
726 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
727 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
731 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
733 # These three libraries do not depend on each other, so we can build
736 $(eval $(call build-package,libraries/hpc,dist-boot,0))
737 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
738 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
739 $(eval $(call build-package,libraries/binary,dist-boot,0))
740 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
742 # register the boot packages in strict sequence, because running
743 # multiple ghc-pkgs in parallel doesn't work (registrations may get
746 $(foreach pkg,$(STAGE0_PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
748 compiler/stage1/package-data.mk : \
749 libraries/Cabal/dist-boot/package-data.mk \
750 libraries/hpc/dist-boot/package-data.mk \
751 libraries/extensible-exceptions/dist-boot/package-data.mk \
752 libraries/bin-package-db/dist-boot/package-data.mk
754 # These are necessary because the bootstrapping compiler may not know
755 # about cross-package dependencies:
756 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
757 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
759 # A few careful dependencies between bootstrapping packages. When we
760 # can rely on the stage 0 compiler being able to generate
761 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
762 # these, and also some of the phases.
764 # If you miss any out here, then 'make -j8' will probably tell you.
766 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
768 # Make sure we have all the GHCi libs by the time we've built
769 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
770 # GHCI libs, and we don't have a better way to express that dependency.
772 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
773 $(compiler_stage2_GHCI_LIB)
775 ifeq "$(UseArchivesForGhci)" "NO"
776 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
779 ifeq "$(UseArchivesForGhci)" "YES"
785 # Deps for TH uses in libraries
786 $(foreach way, $(GhcLibWays),$(eval \
787 libraries/vector/dist-install/build/Data/Vector/Fusion/Stream/Monadic.$($(way)_osuf): \
788 $(libraries/primitive_dist-install_$(GHCI_lib_way)_LIB) \
792 # -----------------------------------------------------------------------------
793 # Creating a local mingw copy on Windows
795 ifeq "$(Windows)" "YES"
797 install : install_mingw
798 .PHONY: install_mingw
799 install_mingw : $(INPLACE_MINGW)
800 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
802 install : install_perl
804 install_perl : $(INPLACE_PERL)
805 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
809 ifneq "$(BINDIST)" "YES"
810 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
811 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
814 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
815 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
817 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
825 # -----------------------------------------------------------------------------
828 install: install_packages install_libs install_libexecs install_headers \
829 install_libexec_scripts install_bins install_topdirs
830 ifeq "$(HADDOCK_DOCS)" "YES"
831 install: install_docs
834 install_bins: $(INSTALL_BINS)
835 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
836 for i in $(INSTALL_BINS); do \
837 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
840 install_libs: $(INSTALL_LIBS)
841 $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
842 for i in $(INSTALL_LIBS); do \
845 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
846 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
848 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
850 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
852 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
854 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
858 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
859 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
862 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
863 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
864 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
868 install_libexecs: $(INSTALL_LIBEXECS)
869 ifeq "$(INSTALL_LIBEXECS)" ""
872 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
873 for i in $(INSTALL_LIBEXECS); do \
874 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
876 # We rename ghc-stage2, so that the right program name is used in error
878 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
881 install_topdirs: $(INSTALL_TOPDIRS)
882 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
883 for i in $(INSTALL_TOPDIRS); do \
884 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
887 install_headers: $(INSTALL_HEADERS)
888 $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
889 for i in $(INSTALL_HEADERS); do \
890 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
893 install_docs: $(INSTALL_DOCS)
894 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
895 ifneq "$(INSTALL_DOCS)" ""
896 for i in $(INSTALL_DOCS); do \
897 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
900 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
901 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
902 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
903 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
904 for i in $(INSTALL_LIBRARY_DOCS); do \
905 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
907 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
908 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
910 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
911 for i in $(INSTALL_HTML_DOC_DIRS); do \
912 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
913 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
917 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
919 # Install packages in the right order, so that ghc-pkg doesn't complain.
920 # Also, install ghc-pkg first.
921 ifeq "$(Windows)" "NO"
922 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
923 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
925 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
926 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
929 INSTALLED_PKG_DIRS := $(addprefix libraries/,$(PACKAGES)) \
931 $(addprefix libraries/,$(PACKAGES_STAGE2))
932 ifeq "$(InstallExtraPackages)" "NO"
933 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(EXTRA_PACKAGES)),\
934 $(INSTALLED_PKG_DIRS))
936 INSTALLED_PKG_DIRS := $(filter-out $(addprefix libraries/,$(INTREE_ONLY_PACKAGES)),\
937 $(INSTALLED_PKG_DIRS))
939 # Set the INSTALL_DISTDIR_p for each package; compiler is special
940 $(foreach p,$(filter-out compiler,$(INSTALLED_PKG_DIRS)),\
941 $(eval INSTALL_DISTDIR_$p = dist-install))
942 INSTALL_DISTDIR_compiler = stage2
944 # Now we can do the installation
945 install_packages: install_libexecs
946 install_packages: libffi/package.conf.install rts/package.conf.install
947 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
948 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
949 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
950 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
951 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
952 $(foreach p, $(INSTALLED_PKG_DIRS), \
953 $(call make-command, \
954 "$(GHC_CABAL_INPLACE)" install \
955 "$(INSTALLED_GHC_REAL)" \
956 "$(INSTALLED_GHC_PKG_REAL)" \
958 "$(DESTDIR)$(topdir)" \
959 $p $(INSTALL_DISTDIR_$p) \
963 '$(docdir)/html/libraries' \
964 $(RelocatableBuild)))
965 $(foreach p, $(HIDDEN_PACKAGES), \
966 $(call make-command, \
967 "$(INSTALLED_GHC_PKG_REAL)" \
968 --global-conf "$(INSTALLED_PACKAGE_CONF)" hide $p))
970 # -----------------------------------------------------------------------------
971 # Binary distributions
973 ifneq "$(CLEANING)" "YES"
974 # This rule seems to hold some files open on Windows which prevents
975 # cleaning, perhaps due to the $(wildcard).
977 $(eval $(call bindist,.,\
981 configure config.sub config.guess install-sh \
986 $(INPLACE_BIN)/mkdirhier \
987 $(INPLACE_BIN)/ghc-cabal \
988 utils/ghc-pwd/ghc-pwd \
989 $(BINDIST_WRAPPERS) \
990 $(BINDIST_PERL_SOURCES) \
994 $(includes_H_CONFIG) \
995 $(includes_H_PLATFORM) \
996 $(includes_H_FILES) \
997 includes/ghcconfig.h \
998 includes/rts/Config.h \
1000 $(INSTALL_LIBEXECS) \
1001 $(INSTALL_LIBEXEC_SCRIPTS) \
1002 $(INSTALL_TOPDIRS) \
1004 $(INSTALL_MANPAGES) \
1006 $(INSTALL_LIBRARY_DOCS) \
1007 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
1009 compiler/stage2/doc \
1010 $(wildcard libraries/*/dist-install/doc/) \
1011 $(wildcard libraries/*/*/dist-install/doc/) \
1012 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
1013 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
1017 libraries/gen_contents_index \
1018 libraries/prologue.txt \
1019 $(wildcard libraries/dph/LICENSE \
1020 libraries/dph/ghc-packages \
1021 libraries/dph/ghc-packages2 \
1022 libraries/dph/ghc-stage2-package) \
1025 # mk/project.mk gets an absolute path, so we manually include it in
1026 # the bindist with a relative path
1028 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
1030 unix-binary-dist-prep:
1031 "$(RM)" $(RM_OPTS_REC) bindistprep/
1032 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
1033 set -e; for i in packages LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
1034 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
1035 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
1036 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
1037 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
1038 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
1039 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
1040 cd $(BIN_DIST_PREP_DIR) && autoreconf
1041 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
1042 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
1043 # tree then we want to include the real file, not a symlink to it
1044 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1046 windows-binary-dist-prep:
1047 "$(RM)" $(RM_OPTS_REC) bindistprep/
1048 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1049 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1052 ifeq "$(ISCC_CMD)" ""
1053 @echo No ISCC_CMD, so not making installer
1055 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1058 # tryTimes tries to run its third argument multiple times, until it
1059 # succeeds. Don't call it directly; call try10Times instead.
1060 # The first and second argument to tryTimes are lists of values.
1061 # The length of the first argument is the number of times we have
1062 # already tried. The length of the second argument is the number more
1063 # times we will try.
1064 tryTimes = $(if $2, \
1065 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1066 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1069 # Try to run the argument 10 times. If all 10 fail, fail.
1070 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1072 .PHONY: publish-binary-dist
1073 publish-binary-dist:
1074 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1075 ifeq "$(mingw32_TARGET_OS)" "1"
1076 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1079 ifeq "$(mingw32_TARGET_OS)" "1"
1080 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/doc
1082 DOCDIR_TO_PUBLISH = bindisttest/"install dir"/share/doc/ghc
1085 .PHONY: publish-docs
1087 $(call try10Times,$(PublishCp) -r $(DOCDIR_TO_PUBLISH)/* $(PublishLocation)/docs)
1089 # -----------------------------------------------------------------------------
1090 # Source distributions
1098 # A source dist is built from a complete build tree, because we
1099 # require some extra files not contained in a darcs checkout: the
1100 # output from Happy and Alex, for example.
1102 # The steps performed by 'make dist' are as follows:
1103 # - create a complete link-tree of the current build tree in /tmp
1104 # - run 'make distclean' on that tree
1105 # - remove a bunch of other files that we know shouldn't be in the dist
1106 # - tar up first the extralibs package, then the main source package
1109 # Directory in which we're going to build the src dist
1111 SRC_DIST_NAME=ghc-$(ProjectVersion)
1112 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1115 # Files to include in source distributions
1117 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1119 configure.ac config.guess config.sub configure \
1120 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1121 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1122 boot boot-pkgs packages ghc.mk
1124 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1127 echo $(ProjectVersion) >VERSION
1132 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1133 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1134 # "stage2" is the dist dir.
1136 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1137 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1142 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1143 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1144 mkdir $(SRC_DIST_DIR)
1145 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1146 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1147 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1148 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1149 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1150 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1151 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1152 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1153 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1154 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1155 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1156 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1157 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1158 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1159 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1160 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1161 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1165 "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1167 sdist-manifest : $(SRC_DIST_TARBALL)
1168 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1170 # Upload the distribution(s)
1171 # Retrying is to work around buggy firewalls that corrupt large file transfers
1173 ifneq "$(PublishLocation)" ""
1175 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1178 ifeq "$(BootingFromHc)" "YES"
1179 # In a normal build we use GHC to compile C files (see
1180 # rules/c-suffix-rules.mk), which passes a number of its own options
1181 # to the C compiler. So when bootstrapping we have to provide these
1182 # flags explicitly to C compilations.
1183 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1184 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1185 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1188 # -----------------------------------------------------------------------------
1189 # sdisting libraries
1191 # Use manually, with e.g.:
1192 # make sdist_directory
1195 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1197 # -----------------------------------------------------------------------------
1202 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1203 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1204 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1205 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1206 CLEAN_FILES += libraries/bootstrapping.conf
1207 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1208 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1210 clean : clean_files clean_libraries
1214 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1216 ifneq "$(NO_CLEAN_GMP)" "YES"
1217 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1218 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1223 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1224 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1227 .PHONY: clean_libraries
1228 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1229 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(STAGE0_PACKAGES))
1232 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1233 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1235 # We have to define a clean target for each library manually, because the
1236 # libraries/*/ghc.mk files are not included when we're cleaning.
1237 ifeq "$(CLEANING)" "YES"
1238 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1239 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1242 clean : clean_bindistprep
1243 .PHONY: clean_bindistprep
1245 "$(RM)" $(RM_OPTS_REC) bindistprep/
1248 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1249 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1250 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1251 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1252 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1253 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1254 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1255 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1256 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1257 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1258 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1260 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1261 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1262 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1263 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1265 maintainer-clean : distclean
1266 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1267 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1268 "$(RM)" $(RM_OPTS) ghc.spec
1269 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1270 $(PACKAGES) $(PACKAGES_STAGE2))
1271 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1272 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1273 $(PACKAGES) $(PACKAGES_STAGE2))
1274 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1275 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1276 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1277 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1278 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1280 .PHONY: all_libraries
1282 .PHONY: bootstrapping-files
1283 bootstrapping-files: $(OTHER_LIBS)
1284 bootstrapping-files: includes/ghcautoconf.h
1285 bootstrapping-files: includes/DerivedConstants.h
1286 bootstrapping-files: includes/GHCConstants.h