1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * Windows: should we have ghc-pkg-<version>?
17 # * should we be stripping things?
18 # * install libgmp.a, gmp.h
19 # * need to fix Cabal for new Windows layout, see
20 # Distribution/Simple/GHC.configureToolchain.
21 # * remove old Makefiles, add new stubs for building in subdirs
23 # * docs/docbook-cheat-sheet/Makefile
24 # * docs/ext-core/Makefile
26 # * docs/storage-mgmt/Makefile
28 # * rts/dotnet/Makefile
30 # * optionally install stage3?
31 # * add Makefiles for the rest of the utils/ programs that aren't built
32 # by default (need to exclude them from 'make all' too)
34 # Tickets we can now close, or fix and close:
36 # * 1693 make distclean
40 # * per-source-file dependencies instead of one .depend file?
41 # * eliminate undefined variables, and use --warn-undefined-variables?
42 # * put outputs from different ways in different subdirs of distdir/build,
43 # then we don't have to use -osuf/-hisuf. We would have to install
44 # them in different places too, so we'd need ghc-pkg support for packages
46 # * make PACKAGES generated by './configure' or 'perl boot'?
47 # * we should use a directory of package.conf files rather than a single
48 # file for the inplace package database, so that we can express
49 # dependencies more accurately. Otherwise it's possible to get into
50 # a state where the package database is out of date, and the build
51 # system doesn't know.
53 # Approximate build order.
55 # The actual build order is defined by dependencies, and the phase
56 # ordering used to ensure correct ordering of makefile-generation; see
57 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
59 # * With bootstrapping compiler:
60 # o Build utils/ghc-cabal
61 # o Build utils/ghc-pkg
62 # o Build utils/hsc2hs
64 # o configure, generate package-data.mk and inplace-pkg-info
65 # o register each package into inplace/lib/package.conf
67 # * With bootstrapping compiler:
68 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
69 # o Build compiler (stage 1)
73 # o Build utils/* (except haddock)
74 # o Build compiler (stage 2)
76 # o Build utils/haddock
77 # o Build compiler (stage 3) (optional)
82 .PHONY: default all haddock
84 # We need second expansion for the way we handle directories, so that
86 # expands to the directory of a rule that uses a % pattern.
91 # Catch make if it runs away into an infinite loop
92 ifeq "$(MAKE_RESTARTS)" ""
93 else ifeq "$(MAKE_RESTARTS)" "1"
94 else ifeq "$(MAKE_RESTARTS)" "2"
96 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
99 # Just bring makefiles up to date:
100 .PHONY: just-makefiles
104 # -----------------------------------------------------------------------------
105 # Misc GNU make utils
108 space=$(nothing) $(nothing)
111 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
112 # by default, because that disables all the implicit rules, but there doesn't
113 # seem to be a good way to do that. This turns off all the old-style suffix
114 # rules, which does half the job and speeds up make quite a bit:
117 # -----------------------------------------------------------------------------
119 # to see the effective value used for a Makefile variable, do
120 # make show VALUE=MY_VALUE
124 @echo '$(VALUE)="$($(VALUE))"'
126 # -----------------------------------------------------------------------------
127 # Include subsidiary build-system bits
131 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
133 ifeq "$(ProjectVersion)" ""
134 $(error Please run ./configure first)
140 # (Optional) build-specific configuration
141 include mk/custom-settings.mk
143 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
144 ifeq "$(GhcLibWays)" ""
145 $(error $$(GhcLibWays) is empty, it must contain at least one way)
149 # -----------------------------------------------------------------------------
150 # Macros for standard targets
152 include rules/all-target.mk
153 include rules/clean-target.mk
155 # -----------------------------------------------------------------------------
158 $(eval $(call clean-target,inplace,,inplace))
160 # -----------------------------------------------------------------------------
161 # Whether to build dependencies or not
163 # When we're just doing 'make clean' or 'make show', then we don't need
164 # to build dependencies.
166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
167 NO_INCLUDE_DEPS = YES
168 NO_INCLUDE_PKGDATA = YES
170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
171 NO_INCLUDE_DEPS = YES
172 NO_INCLUDE_PKGDATA = YES
174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
175 NO_INCLUDE_DEPS = YES
176 # We want package-data.mk for show
179 # We don't haddock the bootstrapping libraries
180 libraries/hpc_dist-boot_DO_HADDOCK = NO
181 libraries/Cabal_dist-boot_DO_HADDOCK = NO
182 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
183 libraries/filepath_dist-boot_DO_HADDOCK = NO
184 libraries/binary_dist-boot_DO_HADDOCK = NO
185 libraries/bin-package-db_dist-boot_DO_HADDOCK = NO
187 # -----------------------------------------------------------------------------
190 include rules/way-prelims.mk
192 $(foreach way,$(ALL_WAYS),\
193 $(eval $(call way-prelims,$(way))))
195 # -----------------------------------------------------------------------------
198 include rules/distdir-way-opts.mk
200 # -----------------------------------------------------------------------------
201 # Finding source files and object files
203 include rules/hs-sources.mk
204 include rules/c-sources.mk
205 include rules/includes-sources.mk
206 include rules/hs-objs.mk
207 include rules/c-objs.mk
208 include rules/cmm-objs.mk
210 # -----------------------------------------------------------------------------
213 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
214 # so we don't make any when cleaning.
215 ifneq "$(CLEANING)" "YES"
217 include rules/hs-suffix-rules-srcdir.mk
218 include rules/hs-suffix-rules.mk
220 # -----------------------------------------------------------------------------
221 # Suffix rules for .hi files
223 include rules/hi-rule.mk
225 $(foreach way,$(ALL_WAYS),\
226 $(eval $(call hi-rule,$(way))))
228 #-----------------------------------------------------------------------------
229 # C-related suffix rules
231 include rules/c-suffix-rules.mk
233 #-----------------------------------------------------------------------------
234 # CMM-related suffix rules
236 include rules/cmm-suffix-rules.mk
240 # -----------------------------------------------------------------------------
241 # Building package-data.mk files from .cabal files
243 include rules/package-config.mk
245 # -----------------------------------------------------------------------------
246 # Building dependencies
248 include rules/build-dependencies.mk
250 # -----------------------------------------------------------------------------
251 # Build package-data.mk files
253 include rules/build-package-data.mk
255 # -----------------------------------------------------------------------------
256 # Build and install a program
258 include rules/build-prog.mk
259 include rules/shell-wrapper.mk
261 # -----------------------------------------------------------------------------
262 # Build a perl script
264 include rules/build-perl.mk
266 # -----------------------------------------------------------------------------
269 include rules/build-package.mk
270 include rules/build-package-way.mk
271 include rules/haddock.mk
272 include rules/tags-package.mk
274 # -----------------------------------------------------------------------------
275 # Registering hand-written package descriptions (used in libffi and rts)
277 include rules/manual-package-config.mk
279 # -----------------------------------------------------------------------------
282 include rules/docbook.mk
284 # -----------------------------------------------------------------------------
287 include rules/bindist.mk
289 # -----------------------------------------------------------------------------
292 define addPackage # args: $1 = package, $2 = condition
294 ifeq "$$(CLEANING)" "YES"
306 $(eval $(call addPackage,ghc-prim))
307 ifeq "$(CLEANING)" "YES"
308 $(eval $(call addPackage,integer-gmp))
309 $(eval $(call addPackage,integer-simple))
311 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
313 $(eval $(call addPackage,base))
314 $(eval $(call addPackage,filepath))
315 $(eval $(call addPackage,array))
316 $(eval $(call addPackage,bytestring))
317 $(eval $(call addPackage,containers))
319 $(eval $(call addPackage,Win32,($$(Windows),YES)))
320 $(eval $(call addPackage,unix,($$(Windows),NO)))
322 $(eval $(call addPackage,old-locale))
323 $(eval $(call addPackage,old-time))
324 $(eval $(call addPackage,time))
325 $(eval $(call addPackage,directory))
326 $(eval $(call addPackage,process))
327 $(eval $(call addPackage,random))
328 $(eval $(call addPackage,extensible-exceptions))
329 $(eval $(call addPackage,haskell98))
330 $(eval $(call addPackage,haskell2010))
331 $(eval $(call addPackage,hpc))
332 $(eval $(call addPackage,pretty))
333 $(eval $(call addPackage,template-haskell))
334 $(eval $(call addPackage,Cabal))
335 $(eval $(call addPackage,binary))
336 $(eval $(call addPackage,bin-package-db))
337 $(eval $(call addPackage,mtl))
338 $(eval $(call addPackage,utf8-string))
339 $(eval $(call addPackage,xhtml))
341 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
343 $(eval $(call addPackage,haskeline))
345 $(foreach pkg,$(EXTRA_PACKAGES),$(eval $(call addPackage,$(pkg))))
347 ifneq "$(BootingFromHc)" "YES"
350 dph/dph-prim-interface \
357 # We assume that the stage0 compiler has a suitable bytestring package,
358 # so we don't have to include it below.
359 BOOT_PKGS = Cabal hpc extensible-exceptions binary bin-package-db
361 BOOT_PKG_CONSTRAINTS := $(foreach p,$(BOOT_PKGS),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
363 # The actual .a and .so/.dll files: needed for dependencies.
364 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
365 ifeq "$(BuildSharedLibs)" "YES"
366 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
368 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
370 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
371 ifeq "$(BuildSharedLibs)" "YES"
372 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
375 # We cannot run ghc-cabal to configure a package until we have
376 # configured and registered all of its dependencies. So the following
377 # hack forces all the configure steps to happen in exactly the following order:
379 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
381 # Ideally we should use the correct dependencies here to allow more
382 # parallelism, but we don't know the dependencies until we've
383 # generated the pacakge-data.mk files.
385 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
386 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
389 ifneq "$(BINDIST)" "YES"
391 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
393 # the GHC package doesn't live in libraries/, so we add its dependency manually:
394 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
395 fixed_pkg_prev:=compiler/stage2/package-data.mk
397 # and continue with PACKAGES_STAGE2, which depend on GHC:
398 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
400 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
401 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
402 # haddock depends on ghc and some libraries, but depending on GHC's
403 # package-data.mk is sufficient, as that in turn depends on all the
405 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
407 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
408 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
409 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
411 # add the final two package.conf dependencies: ghc-prim depends on RTS,
412 # and RTS depends on libffi.
413 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
414 rts/package.conf.inplace : libffi/package.conf.inplace
417 # -----------------------------------------------------------------------------
420 # Don't try to delete directories:
423 # Create build directories on demand. NB. the | below: this indicates
424 # that $(MKDIRHIER) is an order-only dependency, which means that this
425 # rule fires after building mkdirhier, but we won't try to recreate
426 # directories if mkdirhier changes.
430 # -----------------------------------------------------------------------------
431 # Special magic for the ghc-prim package
433 # We want the ghc-prim package to include the GHC.Prim module when it
434 # is registered, but not when it is built, because GHC.Prim is not a
435 # real source module, it is built-in to GHC. The old build system did
436 # this using Setup.hs, but we can't do that here, so we have a flag to
437 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
438 # remains compatible with the old build system for the time being).
439 # GHC.Prim module in the ghc-prim package with a flag:
441 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
443 # And then we strip it out again before building the package:
444 define libraries/ghc-prim_PACKAGE_MAGIC
445 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
448 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
450 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
451 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
453 # Required so that Haddock documents the primops.
454 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
456 # -----------------------------------------------------------------------------
457 # Include build instructions from all subdirs
459 # For the rationale behind the build phases, see
460 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
462 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
463 # "dist", just read the package-data.mk file, do not build anything".
465 # We carefully engineer things so that we can build the
466 # package-data.mk files early on: they depend only on a few tools also
467 # built early. Having got the package-data.mk files built, we can
468 # restart make with up-to-date information about all the packages
469 # (this is phase 0). The remaining problem is the .depend files:
471 # - .depend files in libraries need the stage 1 compiler to build
472 # - ghc/stage1/.depend needs compiler/stage1 built
473 # - compiler/stage1/.depend needs the bootstrap libs built
475 # GHC 6.11+ can build a .depend file without having built the
476 # dependencies of the package, but we can't rely on the bootstrapping
477 # compiler being able to do this, which is why we have to separate the
478 # three phases above.
480 # So this is the final ordering:
482 # Phase 0 : all package-data.mk files
483 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
484 # Phase 1 : .depend files for bootstrap libs
486 # Phase 2 : compiler/stage1/.depend
487 # (requires bootstrap libs and genprimopcode)
488 # Phase 3 : ghc/stage1/.depend
489 # (requires compiler/stage1)
491 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
495 ifneq "$(BINDIST)" "YES"
504 libraries/Cabal/doc \
508 ifneq "$(GhcUnregisterised)" "YES"
514 ifneq "$(BINDIST)" "YES"
527 ifneq "$(BINDIST)" "YES"
534 ifneq "$(HADDOCK_DOCS)" "NO"
540 ifneq "$(CLEANING)" "YES"
542 $(patsubst %, libraries/%, $(PACKAGES))
545 ifneq "$(BootingFromHc)" "YES"
550 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
551 BUILD_DIRS += libraries/integer-gmp/gmp
563 ifeq "$(Windows)" "YES"
568 BUILD_DIRS += utils/count_lines
569 BUILD_DIRS += utils/compare_sizes
571 ifneq "$(CLEANING)" "YES"
572 # After compiler/, because these packages depend on it
574 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
577 # XXX libraries/% must come before any programs built with stage1, see
578 # Note [lib-depends].
581 $(foreach lib,$(BOOT_PKGS),$(eval \
582 libraries/$(lib)_dist-boot_DISABLE = YES))
585 ifneq "$(findstring $(phase),0 1)" ""
586 # We can build deps for compiler/stage1 in phase 2
587 compiler_stage1_DISABLE = YES
590 ifneq "$(findstring $(phase),0 1 2)" ""
591 ghc_stage1_DISABLE = YES
594 ifneq "$(findstring $(phase),0 1 2 3)" ""
595 # In phases 0-3, we disable stage2-3, the full libraries and haddock
596 utils/haddock_dist_DISABLE = YES
597 utils/runghc_dist_DISABLE = YES
598 utils/ghctags_dist_DISABLE = YES
599 utils/hpc_dist_DISABLE = YES
600 utils/hsc2hs_dist-install_DISABLE = YES
601 utils/ghc-pkg_dist-install_DISABLE = YES
602 utils/compare_sizes_dist_DISABLE = YES
603 compiler_stage2_DISABLE = YES
604 compiler_stage3_DISABLE = YES
605 ghc_stage2_DISABLE = YES
606 ghc_stage3_DISABLE = YES
607 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
608 libraries/$(lib)_dist-install_DISABLE = YES))
611 ifneq "$(CLEANING)" "YES"
612 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
613 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
615 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
616 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
618 $(error Unknown integer library: $(INTEGER_LIBRARY))
623 # These packages don't pass the Cabal checks because hs-source-dirs
624 # points outside the source directory. This isn't a real problem in
625 # these cases, so we just skip checking them.
626 CHECKED_libraries/dph/dph-seq = YES
627 CHECKED_libraries/dph/dph-par = YES
628 # In compiler's case, include-dirs points outside of the source tree
629 CHECKED_compiler = YES
631 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
633 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
634 GhcLibHcOpts += -fno-warn-deprecated-flags
635 GhcBootLibHcOpts += -fno-warn-deprecated-flags
637 # ----------------------------------------------
638 # Per-package compiler flags
640 # If you want to add per-package compiler flags, this
641 # is the place to do it. Do it like this for package <pkg>
643 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
644 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
647 # Add $(GhcLibHcOpts) to all library builds
648 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
650 # XXX Hack; remove this
652 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
654 # XXX Hack; remove this
655 # Use -Wwarn for 'binary' becuase it has redundant UNPACK pragmas
656 libraries/binary_dist-install_HC_OPTS += -Wwarn
657 libraries/binary_dist-boot_HC_OPTS += -Wwarn
659 # XXX hack: xhtml has warnings
660 libraries/xhtml_dist-install_HC_OPTS += -Wwarn
662 # XXX hack: haskeline has warnings about deprecated use of block/unblock
663 libraries/haskeline_dist-install_HC_OPTS += -Wwarn
665 # ----------------------------------------------
666 # A useful pseudo-target
668 stage1_libs : $(ALL_STAGE1_LIBS)
670 ifeq "$(HADDOCK_DOCS)" "YES"
671 libraries/index.html: $(ALL_HADDOCK_FILES)
672 cd libraries && sh gen_contents_index --inplace
673 $(eval $(call all-target,library_doc_index,libraries/index.html))
674 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
675 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
676 libraries/haddock*.js libraries/index*.html libraries/*.gif
679 ifeq "$(CHECK_PACKAGES)" "YES"
683 # -----------------------------------------------------------------------------
684 # Bootstrapping libraries
686 # We need to build a few libraries with the installed GHC, since GHC itself
687 # and some of the tools depend on them:
689 ifneq "$(BINDIST)" "YES"
691 ifneq "$(BOOTSTRAPPING_CONF)" ""
692 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
693 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
697 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
699 # These three libraries do not depend on each other, so we can build
702 $(eval $(call build-package,libraries/hpc,dist-boot,0))
703 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
704 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
705 $(eval $(call build-package,libraries/binary,dist-boot,0))
706 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
708 # register the boot packages in strict sequence, because running
709 # multiple ghc-pkgs in parallel doesn't work (registrations may get
712 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
714 compiler/stage1/package-data.mk : \
715 libraries/Cabal/dist-boot/package-data.mk \
716 libraries/hpc/dist-boot/package-data.mk \
717 libraries/extensible-exceptions/dist-boot/package-data.mk \
718 libraries/bin-package-db/dist-boot/package-data.mk
720 # These are necessary because the bootstrapping compiler may not know
721 # about cross-package dependencies:
722 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
723 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
725 # A few careful dependencies between bootstrapping packages. When we
726 # can rely on the stage 0 compiler being able to generate
727 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
728 # these, and also some of the phases.
730 # If you miss any out here, then 'make -j8' will probably tell you.
732 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
734 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
736 # Make sure we have all the GHCi libs by the time we've built
737 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
738 # GHCI libs, and we don't have a better way to express that dependency.
740 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
741 $(compiler_stage2_GHCI_LIB)
743 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
747 # -----------------------------------------------------------------------------
748 # Creating a local mingw copy on Windows
750 ifeq "$(Windows)" "YES"
752 install : install_mingw
753 .PHONY: install_mingw
754 install_mingw : $(INPLACE_MINGW)
755 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
757 install : install_perl
759 install_perl : $(INPLACE_PERL)
760 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
764 ifneq "$(BINDIST)" "YES"
765 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
766 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
767 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
770 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
771 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
773 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
775 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
776 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
778 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
786 # -----------------------------------------------------------------------------
789 install: install_packages install_libs install_libexecs install_headers \
790 install_libexec_scripts install_bins install_docs \
793 install_bins: $(INSTALL_BINS)
794 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
795 for i in $(INSTALL_BINS); do \
796 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
799 install_libs: $(INSTALL_LIBS)
800 $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
801 for i in $(INSTALL_LIBS); do \
804 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
805 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
807 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
809 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
811 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
813 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
817 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
818 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
821 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
822 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
823 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
827 install_libexecs: $(INSTALL_LIBEXECS)
828 ifeq "$(INSTALL_LIBEXECS)" ""
831 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
832 for i in $(INSTALL_LIBEXECS); do \
833 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
835 # We rename ghc-stage2, so that the right program name is used in error
837 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
840 install_topdirs: $(INSTALL_TOPDIRS)
841 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
842 for i in $(INSTALL_TOPDIRS); do \
843 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
846 install_headers: $(INSTALL_HEADERS)
847 $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
848 for i in $(INSTALL_HEADERS); do \
849 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
852 install_docs: $(INSTALL_DOCS)
853 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
854 ifneq "$(INSTALL_DOCS)" ""
855 for i in $(INSTALL_DOCS); do \
856 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
859 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
860 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
861 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
862 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
863 for i in $(INSTALL_LIBRARY_DOCS); do \
864 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
866 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
867 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
869 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
870 for i in $(INSTALL_HTML_DOC_DIRS); do \
871 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
872 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
876 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
878 # Install packages in the right order, so that ghc-pkg doesn't complain.
879 # Also, install ghc-pkg first.
880 ifeq "$(Windows)" "NO"
881 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
882 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
884 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
885 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
888 INSTALLED_PACKAGES := $(filter-out haskeline mtl terminfo utf8-string xhtml,$(PACKAGES))
889 ifeq "$(InstallExtraPackages)" "NO"
890 INSTALLED_PACKAGES := $(filter-out $(EXTRA_PACKAGES), $(INSTALLED_PACKAGES))
893 HIDDEN_PACKAGES = binary
895 define set_INSTALL_DISTDIR
896 # $1 = libraries/base, $2 = dist-install
898 # INSTALL_DISTDIR_libraries/base = dist-install
899 INSTALL_DISTDIR_$1 = $2
902 $(eval $(foreach p,$(INSTALLED_PACKAGES) $(PACKAGES_STAGE2),\
903 $(call set_INSTALL_DISTDIR,libraries/$p,dist-install)))
904 INSTALL_DISTDIR_compiler = stage2
906 ALL_INSTALLED_PACKAGES = $(addprefix libraries/,$(INSTALLED_PACKAGES)) \
908 $(addprefix libraries/,$(PACKAGES_STAGE2))
910 install_packages: install_libexecs
911 install_packages: libffi/package.conf.install rts/package.conf.install
912 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
913 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
914 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
915 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
916 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
917 $(foreach p, $(ALL_INSTALLED_PACKAGES),\
918 "$(GHC_CABAL_INPLACE)" install \
919 "$(INSTALLED_GHC_REAL)" \
920 "$(INSTALLED_GHC_PKG_REAL)" \
922 "$(DESTDIR)$(topdir)" \
923 $p $(INSTALL_DISTDIR_$p) \
924 '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries' \
925 $(RelocatableBuild) &&) true
926 $(foreach p, $(HIDDEN_PACKAGES),\
927 "$(INSTALLED_GHC_PKG_REAL)" --global-conf "$(INSTALLED_PACKAGE_CONF)" \
930 # -----------------------------------------------------------------------------
931 # Binary distributions
933 ifneq "$(CLEANING)" "YES"
934 # This rule seems to hold some files open on Windows which prevents
935 # cleaning, perhaps due to the $(wildcard).
937 $(eval $(call bindist,.,\
941 configure config.sub config.guess install-sh \
945 $(INPLACE_BIN)/mkdirhier \
946 $(INPLACE_BIN)/ghc-cabal \
947 utils/ghc-pwd/ghc-pwd \
948 $(BINDIST_WRAPPERS) \
949 $(BINDIST_PERL_SOURCES) \
953 $(includes_H_CONFIG) \
954 $(includes_H_PLATFORM) \
955 $(includes_H_FILES) \
956 includes/ghcconfig.h \
957 includes/rts/Config.h \
959 $(INSTALL_LIBEXECS) \
960 $(INSTALL_LIBEXEC_SCRIPTS) \
963 $(INSTALL_MANPAGES) \
965 $(INSTALL_LIBRARY_DOCS) \
966 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
968 compiler/stage2/doc \
969 $(wildcard libraries/*/dist-install/doc/) \
970 $(wildcard libraries/*/*/dist-install/doc/) \
971 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
972 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
976 libraries/gen_contents_index \
977 libraries/prologue.txt \
978 libraries/dph/LICENSE \
981 # mk/project.mk gets an absolute path, so we manually include it in
982 # the bindist with a relative path
984 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
986 unix-binary-dist-prep:
987 "$(RM)" $(RM_OPTS_REC) bindistprep/
988 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
989 set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
990 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
991 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
992 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
993 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
994 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
995 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
996 cd $(BIN_DIST_PREP_DIR) && autoreconf
997 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
998 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
999 # tree then we want to include the real file, not a symlink to it
1000 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1002 windows-binary-dist-prep:
1003 "$(RM)" $(RM_OPTS_REC) bindistprep/
1004 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
1005 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
1008 ifeq "$(ISCC_CMD)" ""
1009 @echo No ISCC_CMD, so not making installer
1011 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1014 # tryTimes tries to run its third argument multiple times, until it
1015 # succeeds. Don't call it directly; call try10Times instead.
1016 # The first and second argument to tryTimes are lists of values.
1017 # The length of the first argument is the number of times we have
1018 # already tried. The length of the second argument is the number more
1019 # times we will try.
1020 tryTimes = $(if $2, \
1021 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1022 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1025 # Try to run the argument 10 times. If all 10 fail, fail.
1026 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1028 .PHONY: publish-binary-dist
1029 publish-binary-dist:
1030 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1031 ifeq "$(mingw32_TARGET_OS)" "1"
1032 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1035 .PHONY: publish-docs
1037 $(call try10Times,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
1039 # -----------------------------------------------------------------------------
1040 # Source distributions
1048 # A source dist is built from a complete build tree, because we
1049 # require some extra files not contained in a darcs checkout: the
1050 # output from Happy and Alex, for example.
1052 # The steps performed by 'make dist' are as follows:
1053 # - create a complete link-tree of the current build tree in /tmp
1054 # - run 'make distclean' on that tree
1055 # - remove a bunch of other files that we know shouldn't be in the dist
1056 # - tar up first the extralibs package, then the main source package
1059 # Directory in which we're going to build the src dist
1061 SRC_DIST_NAME=ghc-$(ProjectVersion)
1062 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1065 # Files to include in source distributions
1067 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1069 configure.ac config.guess config.sub configure \
1070 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1071 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1072 boot boot-pkgs packages ghc.mk
1074 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1077 echo $(ProjectVersion) >VERSION
1082 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1083 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1084 # "stage2" is the dist dir.
1086 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1087 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1092 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1093 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1094 mkdir $(SRC_DIST_DIR)
1095 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1096 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1097 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1098 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1099 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1100 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1101 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1102 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1103 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1104 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1105 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1106 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1107 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1108 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1109 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1110 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1111 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1115 "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1117 sdist-manifest : $(SRC_DIST_TARBALL)
1118 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1120 # Upload the distribution(s)
1121 # Retrying is to work around buggy firewalls that corrupt large file transfers
1123 ifneq "$(PublishLocation)" ""
1125 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1128 ifeq "$(BootingFromHc)" "YES"
1129 # In a normal build we use GHC to compile C files (see
1130 # rules/c-suffix-rules.mk), which passes a number of its own options
1131 # to the C compiler. So when bootstrapping we have to provide these
1132 # flags explicitly to C compilations.
1133 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1134 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1135 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1138 # -----------------------------------------------------------------------------
1139 # sdisting libraries
1141 # Use manually, with e.g.:
1142 # make sdist_directory
1145 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1147 # -----------------------------------------------------------------------------
1152 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1153 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1154 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1155 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1156 CLEAN_FILES += libraries/bootstrapping.conf
1157 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1158 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1160 clean : clean_files clean_libraries
1164 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1166 ifneq "$(NO_CLEAN_GMP)" "YES"
1167 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1168 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1173 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1174 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1177 .PHONY: clean_libraries
1178 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1179 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
1182 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1183 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1185 # We have to define a clean target for each library manually, because the
1186 # libraries/*/ghc.mk files are not included when we're cleaning.
1187 ifeq "$(CLEANING)" "YES"
1188 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1189 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1192 clean : clean_bindistprep
1193 .PHONY: clean_bindistprep
1195 "$(RM)" $(RM_OPTS_REC) bindistprep/
1198 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1199 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1200 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1201 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1202 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1203 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1204 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1205 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1206 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1207 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1208 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1210 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1211 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1212 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1213 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1215 maintainer-clean : distclean
1216 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1217 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1218 "$(RM)" $(RM_OPTS) ghc.spec
1219 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1220 $(PACKAGES) $(PACKAGES_STAGE2))
1221 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1222 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1223 $(PACKAGES) $(PACKAGES_STAGE2))
1224 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1225 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1226 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1227 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1228 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1230 .PHONY: all_libraries
1232 .PHONY: bootstrapping-files
1233 bootstrapping-files: $(OTHER_LIBS)
1234 bootstrapping-files: includes/ghcautoconf.h
1235 bootstrapping-files: includes/DerivedConstants.h
1236 bootstrapping-files: includes/GHCConstants.h