1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * other documentation
17 # * create doc index and contents
18 # * Windows: should we have ghc-pkg-<version>?
19 # * should we be stripping things?
20 # * install libgmp.a, gmp.h
21 # * need to fix Cabal for new Windows layout, see
22 # Distribution/Simple/GHC.configureToolchain.
23 # * remove old Makefiles, add new stubs for building in subdirs
25 # * docs/docbook-cheat-sheet/Makefile
26 # * docs/ext-core/Makefile
28 # * docs/storage-mgmt/Makefile
30 # * rts/dotnet/Makefile
33 # * optionally install stage3?
34 # * shared libraries, way dyn
35 # * add Makefiles for the rest of the utils/ programs that aren't built
36 # by default (need to exclude them from 'make all' too)
38 # Tickets we can now close, or fix and close:
40 # * 1693 make distclean
41 # * 3173 make install with DESTDIR
45 # * per-source-file dependencies instead of one .depend file?
46 # * eliminate undefined variables, and use --warn-undefined-variables?
47 # * perhaps we should make all the output dirs in the .depend rule, to
48 # avoid all these mkdirhier calls?
49 # * put outputs from different ways in different subdirs of distdir/build,
50 # then we don't have to use -osuf/-hisuf. We would have to install
51 # them in different places too, so we'd need ghc-pkg support for packages
53 # * make PACKAGES generated by configure or sh boot?
54 # * we should use a directory of package.conf files rather than a single
55 # file for the inplace package database, so that we can express
56 # dependencies more accurately. Otherwise it's possible to get into
57 # a state where the package database is out of date, and the build
58 # system doesn't know.
60 # Approximate build order.
62 # The actual build order is defined by dependencies, and the phase
63 # ordering used to ensure correct ordering of makefile-generation; see
64 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
66 # * With bootstrapping compiler:
67 # o Build utils/ghc-cabal
68 # o Build utils/ghc-pkg
69 # o Build utils/hsc2hs
71 # o configure, generate package-data.mk and inplace-pkg-info
72 # o register each package into inplace/lib/package.conf
74 # * With bootstrapping compiler:
75 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
76 # o Build compiler (stage 1)
80 # o Build utils/* (except haddock)
81 # o Build compiler (stage 2)
83 # o Build utils/haddock
84 # o Build compiler (stage 3) (optional)
89 .PHONY: default all haddock
93 # Just bring makefiles up to date:
94 .PHONY: just-makefiles
98 # -----------------------------------------------------------------------------
102 space=$(nothing) $(nothing)
105 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
106 # by default, because that disables all the implicit rules, but there doesn't
107 # seem to be a good way to do that. This turns off all the old-style suffix
108 # rules, which does half the job and speeds up make quite a bit:
111 # -----------------------------------------------------------------------------
113 # to see the effective value used for a Makefile variable, do
114 # make show VALUE=MY_VALUE
118 @echo '$(VALUE)="$($(VALUE))"'
120 # -----------------------------------------------------------------------------
121 # Include subsidiary build-system bits
125 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
127 ifeq "$(ProjectVersion)" ""
128 $(error Please run ./configure first)
132 # (Optional) build-specific configuration
133 include mk/custom-settings.mk
135 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
136 ifeq "$(GhcLibWays)" ""
137 $(error $$(GhcLibWays) is empty, it must contain at least one way)
141 # -----------------------------------------------------------------------------
142 # Macros for standard targets
144 include rules/all-target.mk
145 include rules/clean-target.mk
147 # -----------------------------------------------------------------------------
150 $(eval $(call clean-target,inplace,,inplace))
152 # -----------------------------------------------------------------------------
153 # Whether to build dependencies or not
155 # When we're just doing 'make clean' or 'make show', then we don't need
156 # to build dependencies.
158 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
159 NO_INCLUDE_DEPS = YES
160 NO_INCLUDE_PKGDATA = YES
162 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
163 NO_INCLUDE_DEPS = YES
164 NO_INCLUDE_PKGDATA = YES
166 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
167 NO_INCLUDE_DEPS = YES
168 # We want package-data.mk for show
171 # We don't haddock base3-compat, as it has the same package name as base
172 libraries/base3-compat_dist-install_DO_HADDOCK = NO
174 # We don't haddock the bootstrapping libraries
175 libraries/hpc_dist-boot_DO_HADDOCK = NO
176 libraries/Cabal_dist-boot_DO_HADDOCK = NO
177 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
178 libraries/filepath_dist-boot_DO_HADDOCK = NO
180 # -----------------------------------------------------------------------------
183 include rules/way-prelims.mk
185 $(foreach way,$(ALL_WAYS),\
186 $(eval $(call way-prelims,$(way))))
188 # -----------------------------------------------------------------------------
191 include rules/distdir-opts.mk
192 include rules/distdir-way-opts.mk
194 # -----------------------------------------------------------------------------
195 # Finding source files and object files
197 include rules/hs-sources.mk
198 include rules/c-sources.mk
199 include rules/includes-sources.mk
200 include rules/hs-objs.mk
201 include rules/c-objs.mk
202 include rules/cmm-objs.mk
204 # -----------------------------------------------------------------------------
207 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
208 # so we don't make any when cleaning.
209 ifneq "$(CLEANING)" "YES"
211 include rules/hs-suffix-rules-srcdir.mk
212 include rules/hs-suffix-rules.mk
214 # -----------------------------------------------------------------------------
215 # Suffix rules for .hi files
217 include rules/hi-rule.mk
219 $(foreach way,$(ALL_WAYS),\
220 $(eval $(call hi-rule,$(way))))
222 #-----------------------------------------------------------------------------
223 # C-related suffix rules
225 include rules/c-suffix-rules.mk
227 #-----------------------------------------------------------------------------
228 # CMM-related suffix rules
230 include rules/cmm-suffix-rules.mk
234 # -----------------------------------------------------------------------------
235 # Building package-data.mk files from .cabal files
237 include rules/package-config.mk
239 # -----------------------------------------------------------------------------
240 # Building dependencies
242 include rules/build-dependencies.mk
244 # -----------------------------------------------------------------------------
245 # Build package-data.mk files
247 include rules/build-package-data.mk
249 # -----------------------------------------------------------------------------
250 # Build and install a program
252 include rules/build-prog.mk
253 include rules/shell-wrapper.mk
255 # -----------------------------------------------------------------------------
256 # Build a perl script
258 include rules/build-perl.mk
260 # -----------------------------------------------------------------------------
263 include rules/build-package.mk
264 include rules/build-package-way.mk
265 include rules/haddock.mk
267 # -----------------------------------------------------------------------------
268 # Registering hand-written package descriptions (used in libffi and rts)
270 include rules/manual-package-config.mk
272 # -----------------------------------------------------------------------------
275 include rules/docbook.mk
277 # -----------------------------------------------------------------------------
280 include rules/bindist.mk
282 # -----------------------------------------------------------------------------
285 # XXX generate from $(TOP)/packages
296 ifeq "$(Windows)" "YES"
308 extensible-exceptions \
319 ifneq "$(Windows)" "YES"
323 PACKAGES += haskeline
325 ifneq "$(BootingFromHc)" "YES"
328 dph/dph-prim-interface \
335 BOOT_PKGS = Cabal hpc extensible-exceptions
337 # The actual .a and .so/.dll files: needed for dependencies.
338 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
339 ifeq "$(BuildSharedLibs)" "YES"
340 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
342 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
344 OTHER_LIBS = libffi/libHSffi$(v_libsuf) libffi/HSffi.o
345 ifeq "$(BuildSharedLibs)" "YES"
346 OTHER_LIBS += libffi/libHSffi$(dyn_libsuf)
349 # We cannot run ghc-cabal to configure a package until we have
350 # configured and registered all of its dependencies. So the following
351 # hack forces all the configure steps to happen in exactly the order
352 # given in the PACKAGES variable above. Ideally we should use the
353 # correct dependencies here to allow more parallelism, but we don't
354 # know the dependencies until we've generated the pacakge-data.mk
357 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(if $$(fixed_pkg_prev),libraries/$$(fixed_pkg_prev)/$2/package-data.mk)
361 ifneq "$(BINDIST)" "YES"
363 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
365 # We assume that the stage2 compiler depends on all the libraries, so
366 # they all get added to the package database before we try to configure
368 compiler/stage2/package-data.mk: $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),libraries/$(pkg)/dist-install/package-data.mk)
369 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
370 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
371 # haddock depends on ghc and some libraries, but depending on GHC's
372 # package-data.mk is sufficient, as that in turn depends on all the
374 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
376 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
378 # add the final two package.conf dependencies: ghc-prim depends on RTS,
379 # and RTS depends on libffi.
380 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
381 rts/package.conf.inplace : libffi/package.conf.inplace
384 # -----------------------------------------------------------------------------
385 # Special magic for the ghc-prim package
387 # We want the ghc-prim package to include the GHC.Prim module when it
388 # is registered, but not when it is built, because GHC.Prim is not a
389 # real source module, it is built-in to GHC. The old build system did
390 # this using Setup.hs, but we can't do that here, so we have a flag to
391 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
392 # remains compatible with the old build system for the time being).
393 # GHC.Prim module in the ghc-prim package with a flag:
395 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
397 # And then we strip it out again before building the package:
398 define libraries/ghc-prim_PACKAGE_MAGIC
399 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
402 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
404 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
405 "$(MKDIRHIER)" $(dir $@)
406 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
408 libraries/ghc-prim/GHC/Prim.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
409 "$(GENPRIMOP_INPLACE)" --make-haskell-source <$(PRIMOPS_TXT) >$@
412 # -----------------------------------------------------------------------------
413 # Include build instructions from all subdirs
415 # For the rationale behind the build phases, see
416 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
418 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
419 # "dist", just read the package-data.mk file, do not build anything".
421 # We carefully engineer things so that we can build the
422 # package-data.mk files early on: they depend only on a few tools also
423 # built early. Having got the package-data.mk files built, we can
424 # restart make with up-to-date information about all the packages
425 # (this is phase 0). The remaining problem is the .depend files:
427 # - .depend files in libraries need the stage 1 compiler to build
428 # - ghc/stage1/.depend needs compiler/stage1 built
429 # - compiler/stage1/.depend needs the bootstrap libs built
431 # GHC 6.11+ can build a .depend file without having built the
432 # dependencies of the package, but we can't rely on the bootstrapping
433 # compiler being able to do this, which is why we have to separate the
434 # three phases above.
436 # So this is the final ordering:
438 # Phase 0 : all package-data.mk files
439 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
440 # Phase 1 : .depend files for bootstrap libs
442 # Phase 2 : compiler/stage1/.depend
443 # (requires bootstrap libs and genprimopcode)
444 # Phase 3 : ghc/stage1/.depend
445 # (requires compiler/stage1)
447 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
451 ifneq "$(BINDIST)" "YES"
453 $(GHC_MKDEPENDC_DIR) \
459 libraries/Cabal/doc \
463 ifneq "$(GhcUnregisterised)" "YES"
469 ifneq "$(BINDIST)" "YES"
482 ifneq "$(BINDIST)" "YES"
492 ifneq "$(CLEANING)" "YES"
494 $(patsubst %, libraries/%, $(PACKAGES) $(PACKAGES_STAGE2))
495 ifneq "$(BootingFromHc)" "YES"
502 libraries/integer-gmp/gmp \
509 ifeq "$(Windows)" "YES"
514 # XXX libraries/% must come before any programs built with stage1, see
515 # Note [lib-depends].
518 $(foreach lib,$(BOOT_PKGS),$(eval \
519 libraries/$(lib)_dist-boot_DISABLE = YES))
522 ifneq "$(findstring $(phase),0 1)" ""
523 # We can build deps for compiler/stage1 in phase 2
524 compiler_stage1_DISABLE = YES
527 ifneq "$(findstring $(phase),0 1 2)" ""
528 ghc_stage1_DISABLE = YES
531 ifneq "$(findstring $(phase),0 1 2 3)" ""
532 # In phases 0-3, we disable stage2-3, the full libraries and haddock
533 utils/haddock_dist_DISABLE = YES
534 utils/runghc_dist_DISABLE = YES
535 utils/hpc_dist_DISABLE = YES
536 utils/hsc2hs_dist-install_DISABLE = YES
537 utils/ghc-pkg_dist-install_DISABLE = YES
538 compiler_stage2_DISABLE = YES
539 compiler_stage3_DISABLE = YES
540 ghc_stage2_DISABLE = YES
541 ghc_stage3_DISABLE = YES
542 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
543 libraries/$(lib)_dist-install_DISABLE = YES))
546 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
548 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
549 GhcLibHcOpts += -fno-warn-deprecated-flags
550 ifeq "$(ghc_ge_609)" "YES"
551 GhcBootLibHcOpts += -fno-warn-deprecated-flags
554 # Add $(GhcLibHcOpts) to all library builds
555 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
557 # XXX Hack; remove this
558 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
560 # XXX we configure packages with the bootstrapping compiler (for
561 # dependency reasons, see the phase ordering), which doesn't
562 # necessarily support all the extensions we need, and Cabal filters
563 # out the ones it thinks aren't supported.
564 libraries/base3-compat_dist-install_HC_OPTS += -XPackageImports
566 # A useful pseudo-target
568 stage1_libs : $(ALL_STAGE1_LIBS)
570 # -----------------------------------------------------------------------------
571 # Bootstrapping libraries
573 # We need to build a few libraries with the installed GHC, since GHC itself
574 # and some of the tools depend on them:
576 ifneq "$(BINDIST)" "YES"
578 ifneq "$(BOOTSTRAPPING_CONF)" ""
579 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
580 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
584 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
586 # These three libraries do not depend on each other, so we can build
589 $(eval $(call build-package,libraries/hpc,dist-boot,0))
590 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
591 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
593 # register the boot packages in strict sequence, because running
594 # multiple ghc-pkgs in parallel doesn't work (registrations may get
597 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
599 compiler/stage1/package-data.mk : \
600 libraries/Cabal/dist-boot/package-data.mk \
601 libraries/hpc/dist-boot/package-data.mk \
602 libraries/extensible-exceptions/dist-boot/package-data.mk
604 # These are necessary because the bootstrapping compiler may not know
605 # about cross-package dependencies:
606 $(compiler_stage1_depfile) : $(BOOT_LIBS)
607 $(ghc_stage1_depfile) : $(compiler_stage1_v_LIB)
609 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
613 # -----------------------------------------------------------------------------
614 # Creating a local mingw copy on Windows
616 ifeq "$(Windows)" "YES"
618 # directories don't work well as dependencies, hence a stamp file
619 $(INPLACE)/stamp-mingw : $(MKDIRHIER)
620 $(MKDIRHIER) $(INPLACE_MINGW)/bin
621 GCC=`type -p $(WhatGccIsCalled)`; \
622 GccDir=`dirname $$GCC`; \
623 "$(CP)" -p $$GccDir/{gcc.exe,ar.exe,as.exe,dlltool.exe,dllwrap.exe,windres.exe} $(INPLACE_MINGW)/bin; \
624 "$(CP)" -Rp $$GccDir/../include $(INPLACE_MINGW); \
625 "$(CP)" -Rp $$GccDir/../lib $(INPLACE_MINGW); \
626 "$(CP)" -Rp $$GccDir/../libexec $(INPLACE_MINGW); \
627 "$(CP)" -Rp $$GccDir/../mingw32 $(INPLACE_MINGW)
628 touch $(INPLACE)/stamp-mingw
630 install : install_mingw
631 .PHONY: install_mingw
632 install_mingw : $(INPLACE_MINGW)
633 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
635 $(INPLACE_LIB)/perl.exe $(INPLACE_LIB)/perl56.dll :
636 "$(CP)" $(GhcDir)../{perl.exe,perl56.dll} $(INPLACE_LIB)
640 libraries/ghc-prim/dist-install/doc/html/ghc-prim/ghc-prim.haddock: \
641 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
642 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
644 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
645 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
646 "$(MKDIRHIER)" $(dir $@)
647 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
649 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
650 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
651 "$(MKDIRHIER)" $(dir $@)
652 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
654 # -----------------------------------------------------------------------------
657 install: install_packages install_libs install_libexecs install_headers \
658 install_libexec_scripts install_bins
660 install_bins: $(INSTALL_BINS)
661 $(INSTALL_DIR) $(DESTDIR)$(bindir)
662 for i in $(INSTALL_BINS); do \
663 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(bindir) ; \
664 if test "$(darwin_TARGET_OS)" = "1"; then \
665 sh mk/fix_install_names.sh $(libdir) $(DESTDIR)$(bindir)/$$i ; \
669 install_libs: $(INSTALL_LIBS)
670 $(INSTALL_DIR) $(DESTDIR)$(libdir)
671 for i in $(INSTALL_LIBS); do \
674 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
675 $(RANLIB) $(DESTDIR)$(libdir)/`basename $$i` ;; \
677 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
679 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir) ;; \
681 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
682 install_name_tool -id $(DESTDIR)$(libdir)/`basename $$i` $(DESTDIR)$(libdir)/`basename $$i` ;; \
684 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(libdir); \
688 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
689 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
690 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
691 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(libexecdir); \
694 install_libexecs: $(INSTALL_LIBEXECS)
695 "$(MKDIRHIER)" $(DESTDIR)$(libexecdir)
696 for i in $(INSTALL_LIBEXECS); do \
697 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(libexecdir); \
700 install_headers: $(INSTALL_HEADERS)
701 $(INSTALL_DIR) $(DESTDIR)$(headerdir)
702 for i in $(INSTALL_HEADERS); do \
703 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i $(DESTDIR)$(headerdir); \
706 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(libdir)/package.conf
708 # Install packages in the right order, so that ghc-pkg doesn't complain.
709 # Also, install ghc-pkg first.
710 ifeq "$(Windows)" "NO"
711 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(libexecdir)/ghc-pkg
713 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
716 install_packages: install_libexecs
717 install_packages: libffi/package.conf.install rts/package.conf.install
718 "$(MKDIRHIER)" $(DESTDIR)$(libdir)
719 echo "[]" > $(INSTALLED_PACKAGE_CONF)
720 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update libffi/package.conf.install
721 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update rts/package.conf.install
722 $(foreach p, $(PACKAGES) $(PACKAGES_STAGE2),\
723 "$(GHC_CABAL_INPLACE)" install \
724 $(INSTALLED_GHC_PKG_REAL) \
725 $(INSTALLED_PACKAGE_CONF) \
726 libraries/$p dist-install \
727 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries' &&) true
728 "$(GHC_CABAL_INPLACE)" install \
729 $(INSTALLED_GHC_PKG_REAL) \
730 $(INSTALLED_PACKAGE_CONF) \
732 '$(DESTDIR)' '$(prefix)' '$(libdir)' '$(docdir)/libraries'
734 # -----------------------------------------------------------------------------
735 # Binary distributions
737 $(eval $(call bindist,.,\
739 configure config.sub config.guess install-sh \
743 $(INPLACE_BIN)/mkdirhier \
744 $(INPLACE_BIN)/ghc-cabal \
745 utils/ghc-pwd/ghc-pwd \
746 $(BINDIST_WRAPPERS) \
751 $(INSTALL_LIBEXECS) \
752 $(INSTALL_LIBEXEC_SCRIPTS) \
754 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
755 $(filter-out %/project.mk,$(filter-out mk/config.mk,$(MAKEFILE_LIST))) \
756 mk/fix_install_names.sh \
758 libraries/dph/LICENSE \
760 # mk/project.mk gets an absolute path, so we manually include it in
761 # the bindist with a relative path
764 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
765 mkdir $(BIN_DIST_NAME)
766 set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace; do ln -s ../$$i $(BIN_DIST_NAME)/; done
767 ln -s ../distrib/configure-bin.ac $(BIN_DIST_NAME)/configure.ac
768 cd $(BIN_DIST_NAME) && autoreconf
769 "$(RM)" $(RM_OPTS) $(BIN_DIST_TAR)
770 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
771 # tree then we want to include the real file, not a symlink to it
772 "$(TAR)" hcf - -T $(BIN_DIST_LIST) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
775 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
776 $(MAKE) prefix=$(BIN_DIST_DIR) install
777 "$(TAR)" cf - $(BIN_DIST_NAME) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
780 "$(ISCC)" /O. /F$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
782 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
784 .PHONY: publish-binary-dist
786 $(call nTimes,10,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
787 ifeq "$(mingw32_TARGET_OS)" "1"
788 $(call nTimes,10,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
791 # -----------------------------------------------------------------------------
792 # Source distributions
800 # A source dist is built from a complete build tree, because we
801 # require some extra files not contained in a darcs checkout: the
802 # output from Happy and Alex, for example.
804 # The steps performed by 'make dist' are as follows:
805 # - create a complete link-tree of the current build tree in /tmp
806 # - run 'make distclean' on that tree
807 # - remove a bunch of other files that we know shouldn't be in the dist
808 # - tar up first the extralibs package, then the main source package
811 # Directory in which we're going to build the src dist
813 SRC_DIST_NAME=ghc-$(ProjectVersion)
814 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
817 # Files to include in source distributions
819 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries
821 configure.ac config.guess config.sub configure \
822 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
823 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
824 boot boot-pkgs packages ghc.mk
826 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
829 echo $(ProjectVersion) >VERSION
834 # $(call sdist_file,compiler,stage2,cmm,CmmLex,x)
835 # to copy the generated file that replaces compiler/cmm/CmmLex.x, where
836 # "stage2" is the dist dir.
838 if test -f $(TOP)/$1/$2/build/$4.hs; then \
839 "$(CP)" $(TOP)/$1/$2/build/$4.hs $1/$3/ ; \
840 mv $1/$3/$4.$5 $1/$3/$4.$5.source ;\
842 echo "does not exist: $1/$2//build/$4.hs"; \
848 "$(RM)" $(RM_OPTS) -r $(SRC_DIST_DIR)
849 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
850 mkdir $(SRC_DIST_DIR)
851 ( cd $(SRC_DIST_DIR) \
852 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(TOP)/$$i ); done \
853 && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done \
854 && $(MAKE) distclean \
855 && if test -f $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then "$(CP)" $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
856 && $(call sdist_file,compiler,stage2,cmm,CmmLex,x) \
857 && $(call sdist_file,compiler,stage2,cmm,CmmParse,y) \
858 && $(call sdist_file,compiler,stage2,main,ParsePkgConf,y) \
859 && $(call sdist_file,compiler,stage2,parser,HaddockLex,x) \
860 && $(call sdist_file,compiler,stage2,parser,HaddockParse,y) \
861 && $(call sdist_file,compiler,stage2,parser,Lexer,x) \
862 && $(call sdist_file,compiler,stage2,parser,Parser,y.pp) \
863 && $(call sdist_file,compiler,stage2,parser,ParserCore,y) \
864 && $(call sdist_file,utils/hpc,dist,,HpcParser,y) \
865 && $(call sdist_file,utils/genprimopcode,dist,,Lexer,x) \
866 && $(call sdist_file,utils/genprimopcode,dist,,Parser,y) \
867 && "$(RM)" $(RM_OPTS) -r compiler/stage[123] mk/build.mk \
868 && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | xargs "$(RM)" $(RM_OPTS) -r \
873 "$(TAR)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
875 sdist-manifest : $(SRC_DIST_TARBALL)
876 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
878 # Upload the distribution(s)
879 # Retrying is to work around buggy firewalls that corrupt large file transfers
881 ifneq "$(PublishLocation)" ""
883 $(call nTimes,10,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
886 ifeq "$(GhcUnregisterised)" "YES"
887 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
890 # -----------------------------------------------------------------------------
895 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
896 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
897 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
898 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
899 CLEAN_FILES += libraries/bootstrapping.conf
901 clean : clean_files clean_libraries
905 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
907 .PHONY: clean_libraries
908 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
909 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
912 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
913 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
915 # We have to define a clean target for each library manually, because the
916 # libraries/*/ghc.mk files are not included when we're cleaning.
917 ifeq "$(CLEANING)" "YES"
918 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
919 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
923 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
924 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
925 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
926 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
927 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
928 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
929 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
930 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
931 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
932 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
933 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
935 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
936 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
937 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
938 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
940 maintainer-clean : distclean
941 "$(RM)" $(RM_OPTS) configure mk/config.h.in
942 "$(RM)" $(RM_OPTS) -r autom4te.cache libraries/*/autom4te.cache
943 "$(RM)" $(RM_OPTS) ghc.spec
944 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
945 $(PACKAGES) $(PACKAGES_STAGE2))
946 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
947 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
948 $(PACKAGES) $(PACKAGES_STAGE2))
949 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
950 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
951 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
952 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
953 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
955 .PHONY: all_libraries
957 .PHONY: bootstrapping-files
958 bootstrapping-files: $(OTHER_LIBS)
959 bootstrapping-files: includes/ghcautoconf.h
960 bootstrapping-files: includes/DerivedConstants.h
961 bootstrapping-files: includes/GHCConstants.h