1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * Windows: should we have ghc-pkg-<version>?
17 # * should we be stripping things?
18 # * install libgmp.a, gmp.h
19 # * need to fix Cabal for new Windows layout, see
20 # Distribution/Simple/GHC.configureToolchain.
21 # * remove old Makefiles, add new stubs for building in subdirs
23 # * docs/docbook-cheat-sheet/Makefile
24 # * docs/ext-core/Makefile
26 # * docs/storage-mgmt/Makefile
28 # * rts/dotnet/Makefile
30 # * optionally install stage3?
31 # * add Makefiles for the rest of the utils/ programs that aren't built
32 # by default (need to exclude them from 'make all' too)
34 # Tickets we can now close, or fix and close:
36 # * 1693 make distclean
40 # * per-source-file dependencies instead of one .depend file?
41 # * eliminate undefined variables, and use --warn-undefined-variables?
42 # * perhaps we should make all the output dirs in the .depend rule, to
43 # avoid all these mkdirhier calls?
44 # * put outputs from different ways in different subdirs of distdir/build,
45 # then we don't have to use -osuf/-hisuf. We would have to install
46 # them in different places too, so we'd need ghc-pkg support for packages
48 # * make PACKAGES generated by configure or sh boot?
49 # * we should use a directory of package.conf files rather than a single
50 # file for the inplace package database, so that we can express
51 # dependencies more accurately. Otherwise it's possible to get into
52 # a state where the package database is out of date, and the build
53 # system doesn't know.
55 # Approximate build order.
57 # The actual build order is defined by dependencies, and the phase
58 # ordering used to ensure correct ordering of makefile-generation; see
59 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
61 # * With bootstrapping compiler:
62 # o Build utils/ghc-cabal
63 # o Build utils/ghc-pkg
64 # o Build utils/hsc2hs
66 # o configure, generate package-data.mk and inplace-pkg-info
67 # o register each package into inplace/lib/package.conf
69 # * With bootstrapping compiler:
70 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
71 # o Build compiler (stage 1)
75 # o Build utils/* (except haddock)
76 # o Build compiler (stage 2)
78 # o Build utils/haddock
79 # o Build compiler (stage 3) (optional)
84 .PHONY: default all haddock
88 # Just bring makefiles up to date:
89 .PHONY: just-makefiles
93 # -----------------------------------------------------------------------------
97 space=$(nothing) $(nothing)
100 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
101 # by default, because that disables all the implicit rules, but there doesn't
102 # seem to be a good way to do that. This turns off all the old-style suffix
103 # rules, which does half the job and speeds up make quite a bit:
106 # -----------------------------------------------------------------------------
108 # to see the effective value used for a Makefile variable, do
109 # make show VALUE=MY_VALUE
113 @echo '$(VALUE)="$($(VALUE))"'
115 # -----------------------------------------------------------------------------
116 # Include subsidiary build-system bits
120 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
122 ifeq "$(ProjectVersion)" ""
123 $(error Please run ./configure first)
127 # (Optional) build-specific configuration
128 include mk/custom-settings.mk
130 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
131 ifeq "$(GhcLibWays)" ""
132 $(error $$(GhcLibWays) is empty, it must contain at least one way)
136 # -----------------------------------------------------------------------------
137 # Macros for standard targets
139 include rules/all-target.mk
140 include rules/clean-target.mk
142 # -----------------------------------------------------------------------------
145 $(eval $(call clean-target,inplace,,inplace))
147 # -----------------------------------------------------------------------------
148 # Whether to build dependencies or not
150 # When we're just doing 'make clean' or 'make show', then we don't need
151 # to build dependencies.
153 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
154 NO_INCLUDE_DEPS = YES
155 NO_INCLUDE_PKGDATA = YES
157 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
158 NO_INCLUDE_DEPS = YES
159 NO_INCLUDE_PKGDATA = YES
161 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
162 NO_INCLUDE_DEPS = YES
163 # We want package-data.mk for show
166 # We don't haddock base3-compat, as it has the same package name as base
167 libraries/base3-compat_dist-install_DO_HADDOCK = NO
169 # We don't haddock the bootstrapping libraries
170 libraries/hpc_dist-boot_DO_HADDOCK = NO
171 libraries/Cabal_dist-boot_DO_HADDOCK = NO
172 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
173 libraries/filepath_dist-boot_DO_HADDOCK = NO
174 libraries/binary_dist-boot_DO_HADDOCK = NO
175 libraries/bin-package-db_dist-boot_DO_HADDOCK = NO
177 # -----------------------------------------------------------------------------
180 include rules/way-prelims.mk
182 $(foreach way,$(ALL_WAYS),\
183 $(eval $(call way-prelims,$(way))))
185 # -----------------------------------------------------------------------------
188 include rules/distdir-way-opts.mk
190 # -----------------------------------------------------------------------------
191 # Finding source files and object files
193 include rules/hs-sources.mk
194 include rules/c-sources.mk
195 include rules/includes-sources.mk
196 include rules/hs-objs.mk
197 include rules/c-objs.mk
198 include rules/cmm-objs.mk
200 # -----------------------------------------------------------------------------
203 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
204 # so we don't make any when cleaning.
205 ifneq "$(CLEANING)" "YES"
207 include rules/hs-suffix-rules-srcdir.mk
208 include rules/hs-suffix-rules.mk
210 # -----------------------------------------------------------------------------
211 # Suffix rules for .hi files
213 include rules/hi-rule.mk
215 $(foreach way,$(ALL_WAYS),\
216 $(eval $(call hi-rule,$(way))))
218 #-----------------------------------------------------------------------------
219 # C-related suffix rules
221 include rules/c-suffix-rules.mk
223 #-----------------------------------------------------------------------------
224 # CMM-related suffix rules
226 include rules/cmm-suffix-rules.mk
230 # -----------------------------------------------------------------------------
231 # Building package-data.mk files from .cabal files
233 include rules/package-config.mk
235 # -----------------------------------------------------------------------------
236 # Building dependencies
238 include rules/build-dependencies.mk
240 # -----------------------------------------------------------------------------
241 # Build package-data.mk files
243 include rules/build-package-data.mk
245 # -----------------------------------------------------------------------------
246 # Build and install a program
248 include rules/build-prog.mk
249 include rules/shell-wrapper.mk
251 # -----------------------------------------------------------------------------
252 # Build a perl script
254 include rules/build-perl.mk
256 # -----------------------------------------------------------------------------
259 include rules/build-package.mk
260 include rules/build-package-way.mk
261 include rules/haddock.mk
263 # -----------------------------------------------------------------------------
264 # Registering hand-written package descriptions (used in libffi and rts)
266 include rules/manual-package-config.mk
268 # -----------------------------------------------------------------------------
271 include rules/docbook.mk
273 # -----------------------------------------------------------------------------
276 include rules/bindist.mk
278 # -----------------------------------------------------------------------------
281 define addPackage # args: $1 = package, $2 = condition
283 ifeq "$$(CLEANING)" "YES"
295 $(eval $(call addPackage,ghc-prim))
296 ifeq "$(CLEANING)" "YES"
297 $(eval $(call addPackage,integer-gmp))
298 $(eval $(call addPackage,integer-simple))
300 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
302 $(eval $(call addPackage,base))
303 $(eval $(call addPackage,filepath))
304 $(eval $(call addPackage,array))
305 $(eval $(call addPackage,bytestring))
306 $(eval $(call addPackage,containers))
308 $(eval $(call addPackage,Win32,($$(Windows),YES)))
309 $(eval $(call addPackage,unix,($$(Windows),NO)))
311 $(eval $(call addPackage,old-locale))
312 $(eval $(call addPackage,old-time))
313 $(eval $(call addPackage,time))
314 $(eval $(call addPackage,directory))
315 $(eval $(call addPackage,process))
316 $(eval $(call addPackage,random))
317 $(eval $(call addPackage,extensible-exceptions))
318 $(eval $(call addPackage,haskell98))
319 $(eval $(call addPackage,hpc))
320 $(eval $(call addPackage,pretty))
321 $(eval $(call addPackage,syb))
322 $(eval $(call addPackage,template-haskell))
323 $(eval $(call addPackage,base3-compat))
324 $(eval $(call addPackage,Cabal))
325 $(eval $(call addPackage,binary))
326 $(eval $(call addPackage,bin-package-db))
327 $(eval $(call addPackage,mtl))
328 $(eval $(call addPackage,utf8-string))
330 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
332 $(eval $(call addPackage,haskeline))
334 ifneq "$(BootingFromHc)" "YES"
337 dph/dph-prim-interface \
344 # We assume that the stage0 compiler has a suitable bytestring package,
345 # so we don't have to include it below.
346 BOOT_PKGS = Cabal hpc extensible-exceptions binary bin-package-db
348 # The actual .a and .so/.dll files: needed for dependencies.
349 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
350 ifeq "$(BuildSharedLibs)" "YES"
351 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
353 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
355 OTHER_LIBS = libffi/libHSffi$(v_libsuf) libffi/HSffi.o
356 ifeq "$(BuildSharedLibs)" "YES"
357 OTHER_LIBS += libffi/libHSffi$(dyn_libsuf)
360 # We cannot run ghc-cabal to configure a package until we have
361 # configured and registered all of its dependencies. So the following
362 # hack forces all the configure steps to happen in exactly the order
363 # given in the PACKAGES variable above. Ideally we should use the
364 # correct dependencies here to allow more parallelism, but we don't
365 # know the dependencies until we've generated the pacakge-data.mk
368 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(if $$(fixed_pkg_prev),libraries/$$(fixed_pkg_prev)/$2/package-data.mk)
372 ifneq "$(BINDIST)" "YES"
374 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
376 # We assume that the stage2 compiler depends on all the libraries, so
377 # they all get added to the package database before we try to configure
379 compiler/stage2/package-data.mk: $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),libraries/$(pkg)/dist-install/package-data.mk)
380 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
381 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
382 # haddock depends on ghc and some libraries, but depending on GHC's
383 # package-data.mk is sufficient, as that in turn depends on all the
385 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
387 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
389 # add the final two package.conf dependencies: ghc-prim depends on RTS,
390 # and RTS depends on libffi.
391 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
392 rts/package.conf.inplace : libffi/package.conf.inplace
395 # -----------------------------------------------------------------------------
396 # Special magic for the ghc-prim package
398 # We want the ghc-prim package to include the GHC.Prim module when it
399 # is registered, but not when it is built, because GHC.Prim is not a
400 # real source module, it is built-in to GHC. The old build system did
401 # this using Setup.hs, but we can't do that here, so we have a flag to
402 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
403 # remains compatible with the old build system for the time being).
404 # GHC.Prim module in the ghc-prim package with a flag:
406 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
408 # And then we strip it out again before building the package:
409 define libraries/ghc-prim_PACKAGE_MAGIC
410 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
413 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
415 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
416 "$(MKDIRHIER)" $(dir $@)
417 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
419 libraries/ghc-prim/GHC/Prim.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT)
420 "$(GENPRIMOP_INPLACE)" --make-haskell-source <$(PRIMOPS_TXT) >$@
423 # -----------------------------------------------------------------------------
424 # Include build instructions from all subdirs
426 # For the rationale behind the build phases, see
427 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
429 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
430 # "dist", just read the package-data.mk file, do not build anything".
432 # We carefully engineer things so that we can build the
433 # package-data.mk files early on: they depend only on a few tools also
434 # built early. Having got the package-data.mk files built, we can
435 # restart make with up-to-date information about all the packages
436 # (this is phase 0). The remaining problem is the .depend files:
438 # - .depend files in libraries need the stage 1 compiler to build
439 # - ghc/stage1/.depend needs compiler/stage1 built
440 # - compiler/stage1/.depend needs the bootstrap libs built
442 # GHC 6.11+ can build a .depend file without having built the
443 # dependencies of the package, but we can't rely on the bootstrapping
444 # compiler being able to do this, which is why we have to separate the
445 # three phases above.
447 # So this is the final ordering:
449 # Phase 0 : all package-data.mk files
450 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
451 # Phase 1 : .depend files for bootstrap libs
453 # Phase 2 : compiler/stage1/.depend
454 # (requires bootstrap libs and genprimopcode)
455 # Phase 3 : ghc/stage1/.depend
456 # (requires compiler/stage1)
458 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
462 ifneq "$(BINDIST)" "YES"
464 $(GHC_MKDEPENDC_DIR) \
470 libraries/Cabal/doc \
474 ifneq "$(GhcUnregisterised)" "YES"
480 ifneq "$(BINDIST)" "YES"
493 ifneq "$(BINDIST)" "YES"
503 ifneq "$(CLEANING)" "YES"
505 $(patsubst %, libraries/%, $(PACKAGES) $(PACKAGES_STAGE2))
506 ifneq "$(BootingFromHc)" "YES"
512 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
513 BUILD_DIRS += libraries/integer-gmp/gmp
523 ifeq "$(Windows)" "YES"
528 # XXX libraries/% must come before any programs built with stage1, see
529 # Note [lib-depends].
532 $(foreach lib,$(BOOT_PKGS),$(eval \
533 libraries/$(lib)_dist-boot_DISABLE = YES))
536 ifneq "$(findstring $(phase),0 1)" ""
537 # We can build deps for compiler/stage1 in phase 2
538 compiler_stage1_DISABLE = YES
541 ifneq "$(findstring $(phase),0 1 2)" ""
542 ghc_stage1_DISABLE = YES
545 ifneq "$(CLEANING)" "YES"
546 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
547 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
549 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
550 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
552 $(error Unknown integer library: $(INTEGER_LIBRARY))
557 ifneq "$(findstring $(phase),0 1 2 3)" ""
558 # In phases 0-3, we disable stage2-3, the full libraries and haddock
559 utils/haddock_dist_DISABLE = YES
560 utils/runghc_dist_DISABLE = YES
561 utils/hpc_dist_DISABLE = YES
562 utils/hsc2hs_dist-install_DISABLE = YES
563 utils/ghc-pkg_dist-install_DISABLE = YES
564 compiler_stage2_DISABLE = YES
565 compiler_stage3_DISABLE = YES
566 ghc_stage2_DISABLE = YES
567 ghc_stage3_DISABLE = YES
568 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
569 libraries/$(lib)_dist-install_DISABLE = YES))
572 # These packages don't pass the Cabal checks because hs-source-dirs
573 # points outside the source directory. This isn't a real problem in
574 # these cases, so we just skip checking them.
575 CHECKED_libraries/dph/dph-seq = YES
576 CHECKED_libraries/dph/dph-par = YES
577 # In compiler's case, include-dirs points outside of the source tree
578 CHECKED_compiler = YES
580 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
582 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
583 GhcLibHcOpts += -fno-warn-deprecated-flags
584 ifeq "$(ghc_ge_609)" "YES"
585 GhcBootLibHcOpts += -fno-warn-deprecated-flags
588 # Add $(GhcLibHcOpts) to all library builds
589 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
591 # XXX Hack; remove this
592 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
594 # XXX we configure packages with the bootstrapping compiler (for
595 # dependency reasons, see the phase ordering), which doesn't
596 # necessarily support all the extensions we need, and Cabal filters
597 # out the ones it thinks aren't supported.
598 libraries/base3-compat_dist-install_HC_OPTS += -XPackageImports
600 # A useful pseudo-target
602 stage1_libs : $(ALL_STAGE1_LIBS)
604 ifeq "$(HADDOCK_DOCS)" "YES"
605 libraries/index.html: $(ALL_HADDOCK_FILES)
606 cd libraries && sh gen_contents_index --inplace
607 $(eval $(call all-target,library_doc_index,libraries/index.html))
608 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
611 ifeq "$(CHECK_PACKAGES)" "YES"
615 # -----------------------------------------------------------------------------
616 # Bootstrapping libraries
618 # We need to build a few libraries with the installed GHC, since GHC itself
619 # and some of the tools depend on them:
621 ifneq "$(BINDIST)" "YES"
623 ifneq "$(BOOTSTRAPPING_CONF)" ""
624 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
625 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
629 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
631 # These three libraries do not depend on each other, so we can build
634 $(eval $(call build-package,libraries/hpc,dist-boot,0))
635 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
636 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
637 $(eval $(call build-package,libraries/binary,dist-boot,0))
638 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
640 # register the boot packages in strict sequence, because running
641 # multiple ghc-pkgs in parallel doesn't work (registrations may get
644 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
646 compiler/stage1/package-data.mk : \
647 libraries/Cabal/dist-boot/package-data.mk \
648 libraries/hpc/dist-boot/package-data.mk \
649 libraries/extensible-exceptions/dist-boot/package-data.mk \
650 libraries/bin-package-db/dist-boot/package-data.mk
652 # These are necessary because the bootstrapping compiler may not know
653 # about cross-package dependencies:
654 $(compiler_stage1_depfile) : $(BOOT_LIBS)
655 $(ghc_stage1_depfile) : $(compiler_stage1_v_LIB)
657 # A few careful dependencies between bootstrapping packages. When we
658 # can rely on the stage 0 compiler being able to generate
659 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
660 # these, and also some of the phases.
662 # If you miss any out here, then 'make -j8' will probably tell you.
664 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
666 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
670 # -----------------------------------------------------------------------------
671 # Creating a local mingw copy on Windows
673 ifeq "$(Windows)" "YES"
675 # directories don't work well as dependencies, hence a stamp file
676 $(INPLACE)/stamp-mingw : $(MKDIRHIER)
677 $(MKDIRHIER) $(INPLACE_MINGW)/bin
678 GCC=`type -p $(WhatGccIsCalled)`; \
679 GccDir=`dirname $$GCC`; \
680 "$(CP)" -p $$GccDir/{gcc.exe,ar.exe,as.exe,dlltool.exe,dllwrap.exe,windres.exe} $(INPLACE_MINGW)/bin; \
681 "$(CP)" -Rp $$GccDir/../include $(INPLACE_MINGW); \
682 "$(CP)" -Rp $$GccDir/../lib $(INPLACE_MINGW); \
683 "$(CP)" -Rp $$GccDir/../libexec $(INPLACE_MINGW); \
684 "$(CP)" -Rp $$GccDir/../mingw32 $(INPLACE_MINGW)
685 touch $(INPLACE)/stamp-mingw
687 install : install_mingw
688 .PHONY: install_mingw
689 install_mingw : $(INPLACE_MINGW)
690 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
692 $(INPLACE_LIB)/perl.exe $(INPLACE_LIB)/perl56.dll :
693 "$(CP)" $(GhcDir)../{perl.exe,perl56.dll} $(INPLACE_LIB)
697 libraries/ghc-prim/dist-install/doc/html/ghc-prim/ghc-prim.haddock: \
698 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
699 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
701 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
702 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
703 "$(MKDIRHIER)" $(dir $@)
704 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
706 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
707 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) $(MKDIRHIER)
708 "$(MKDIRHIER)" $(dir $@)
709 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
711 # -----------------------------------------------------------------------------
714 install: install_packages install_libs install_libexecs install_headers \
715 install_libexec_scripts install_bins install_docs \
716 install_topdirs install_topdir_scripts
718 install_bins: $(INSTALL_BINS)
719 $(INSTALL_DIR) $(DESTDIR)$(bindir)
720 for i in $(INSTALL_BINS); do \
721 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(bindir) ; \
722 if test "$(darwin_TARGET_OS)" = "1"; then \
723 sh mk/fix_install_names.sh $(ghclibdir) $(DESTDIR)$(bindir)/$$i ; \
727 install_libs: $(INSTALL_LIBS)
728 $(INSTALL_DIR) $(DESTDIR)$(ghclibdir)
729 for i in $(INSTALL_LIBS); do \
732 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir); \
733 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
735 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir) ;; \
737 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir) ;; \
739 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir); \
740 install_name_tool -id $(DESTDIR)$(ghclibdir)/`basename $$i` $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
742 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibdir); \
746 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
747 $(INSTALL_DIR) $(DESTDIR)$(ghclibexecdir)
748 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
749 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghclibexecdir); \
752 install_libexecs: $(INSTALL_LIBEXECS)
753 $(INSTALL_DIR) $(DESTDIR)$(ghclibexecdir)
754 for i in $(INSTALL_LIBEXECS); do \
755 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(ghclibexecdir); \
758 install_topdir_scripts: $(INSTALL_TOPDIR_SCRIPTS)
759 $(INSTALL_DIR) $(DESTDIR)$(topdir)
760 for i in $(INSTALL_TOPDIR_SCRIPTS); do \
761 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(DESTDIR)$(topdir); \
764 install_topdirs: $(INSTALL_TOPDIRS)
765 $(INSTALL_DIR) $(DESTDIR)$(topdir)
766 for i in $(INSTALL_TOPDIRS); do \
767 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(DESTDIR)$(topdir); \
770 install_headers: $(INSTALL_HEADERS)
771 $(INSTALL_DIR) $(DESTDIR)$(ghcheaderdir)
772 for i in $(INSTALL_HEADERS); do \
773 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i $(DESTDIR)$(ghcheaderdir); \
776 install_docs: $(INSTALL_HEADERS)
777 $(INSTALL_DIR) $(DESTDIR)$(docdir)
778 for i in $(INSTALL_DOCS); do \
779 $(INSTALL_DOC) $(INSTALL_OPTS) $$i $(DESTDIR)$(docdir); \
781 $(INSTALL_DIR) $(INSTALL_OPTS) $(DESTDIR)$(docdir)/html; \
782 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html $(DESTDIR)$(docdir)/html; \
783 for i in $(INSTALL_LIBRARY_DOCS); do \
784 $(INSTALL_DOC) $(INSTALL_OPTS) $$i $(DESTDIR)$(docdir)/html/libraries/; \
786 for i in $(INSTALL_HTML_DOC_DIRS); do \
787 $(INSTALL_DIR) $(INSTALL_OPTS) $(DESTDIR)$(docdir)/html/`basename $$i`; \
788 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* $(DESTDIR)$(docdir)/html/`basename $$i`; \
791 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
793 # Install packages in the right order, so that ghc-pkg doesn't complain.
794 # Also, install ghc-pkg first.
795 ifeq "$(Windows)" "NO"
796 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-stage2
797 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
799 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc-stage2.exe
800 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
803 install_packages: install_libexecs
804 install_packages: libffi/package.conf.install rts/package.conf.install
805 $(INSTALL_DIR) $(DESTDIR)$(topdir)
806 "$(RM)" -r $(RM_OPTS) $(INSTALLED_PACKAGE_CONF)
807 $(INSTALL_DIR) $(INSTALLED_PACKAGE_CONF)
808 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update libffi/package.conf.install
809 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf $(INSTALLED_PACKAGE_CONF) update rts/package.conf.install
810 $(foreach p, $(PACKAGES) $(PACKAGES_STAGE2),\
811 "$(GHC_CABAL_INPLACE)" install \
812 $(INSTALLED_GHC_REAL) \
813 $(INSTALLED_GHC_PKG_REAL) \
814 $(DESTDIR)$(topdir) \
815 libraries/$p dist-install \
816 '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries' &&) true
817 "$(GHC_CABAL_INPLACE)" install \
818 $(INSTALLED_GHC_REAL) \
819 $(INSTALLED_GHC_PKG_REAL) \
820 $(DESTDIR)$(topdir) \
822 '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries'
824 # -----------------------------------------------------------------------------
825 # Binary distributions
827 ifneq "$(CLEANING)" "YES"
828 # This rule seems to hold some files open on Windows which prevents
829 # cleaning, perhaps due to the $(wildcard).
831 $(eval $(call bindist,.,\
833 configure config.sub config.guess install-sh \
837 $(INPLACE_BIN)/mkdirhier \
838 $(INPLACE_BIN)/ghc-cabal \
839 utils/ghc-pwd/ghc-pwd \
840 $(BINDIST_WRAPPERS) \
845 $(INSTALL_LIBEXECS) \
846 $(INSTALL_LIBEXEC_SCRIPTS) \
848 $(INSTALL_TOPDIR_SCRIPTS) \
851 $(INSTALL_LIBRARY_DOCS) \
852 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
854 $(wildcard libraries/*/dist-install/doc/) \
855 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
856 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
857 mk/fix_install_names.sh \
861 libraries/dph/LICENSE \
864 # mk/project.mk gets an absolute path, so we manually include it in
865 # the bindist with a relative path
867 BIN_DIST_MK = $(BIN_DIST_NAME)/bindist.mk
870 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
871 mkdir $(BIN_DIST_NAME)
872 set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace; do ln -s ../$$i $(BIN_DIST_NAME)/; done
873 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
874 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
875 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
876 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
877 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
878 ln -s ../distrib/configure-bin.ac $(BIN_DIST_NAME)/configure.ac
879 cd $(BIN_DIST_NAME) && autoreconf
880 "$(RM)" $(RM_OPTS) $(BIN_DIST_TAR)
881 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
882 # tree then we want to include the real file, not a symlink to it
883 "$(TAR)" hcf - -T $(BIN_DIST_LIST) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
886 "$(RM)" $(RM_OPTS) -r $(BIN_DIST_NAME)
887 $(MAKE) prefix=$(BIN_DIST_DIR) install
888 "$(TAR)" cf - $(BIN_DIST_NAME) | bzip2 -c > $(BIN_DIST_TAR_BZ2)
891 "$(ISCC)" /O. /F$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
893 nTimes = set -e; for i in `seq 1 $(1)`; do echo Try "$$i: $(2)"; if $(2); then break; fi; done
895 .PHONY: publish-binary-dist
897 $(call nTimes,10,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
898 ifeq "$(mingw32_TARGET_OS)" "1"
899 $(call nTimes,10,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
904 $(call nTimes,10,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
906 # -----------------------------------------------------------------------------
907 # Source distributions
915 # A source dist is built from a complete build tree, because we
916 # require some extra files not contained in a darcs checkout: the
917 # output from Happy and Alex, for example.
919 # The steps performed by 'make dist' are as follows:
920 # - create a complete link-tree of the current build tree in /tmp
921 # - run 'make distclean' on that tree
922 # - remove a bunch of other files that we know shouldn't be in the dist
923 # - tar up first the extralibs package, then the main source package
926 # Directory in which we're going to build the src dist
928 SRC_DIST_NAME=ghc-$(ProjectVersion)
929 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
932 # Files to include in source distributions
934 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries
936 configure.ac config.guess config.sub configure \
937 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
938 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
939 boot boot-pkgs packages ghc.mk
941 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
944 echo $(ProjectVersion) >VERSION
949 # $(call sdist_file,compiler,stage2,cmm,CmmLex,x)
950 # to copy the generated file that replaces compiler/cmm/CmmLex.x, where
951 # "stage2" is the dist dir.
953 if test -f $(TOP)/$1/$2/build/$4.hs; then \
954 "$(CP)" $(TOP)/$1/$2/build/$4.hs $1/$3/ ; \
955 mv $1/$3/$4.$5 $1/$3/$4.$5.source ;\
957 echo "does not exist: $1/$2//build/$4.hs"; \
963 "$(RM)" $(RM_OPTS) -r $(SRC_DIST_DIR)
964 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
965 mkdir $(SRC_DIST_DIR)
966 ( cd $(SRC_DIST_DIR) \
967 && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(TOP)/$$i ); done \
968 && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done \
969 && $(MAKE) distclean \
970 && if test -f $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs; then "$(CP)" $(TOP)/libraries/haskell-src/dist/build/Language/Haskell/Parser.hs libraries/haskell-src/Language/Haskell/ ; mv libraries/haskell-src/Language/Haskell/Parser.ly libraries/haskell-src/Language/Haskell/Parser.ly.source ; fi \
971 && $(call sdist_file,compiler,stage2,cmm,CmmLex,x) \
972 && $(call sdist_file,compiler,stage2,cmm,CmmParse,y) \
973 && $(call sdist_file,compiler,stage2,main,ParsePkgConf,y) \
974 && $(call sdist_file,compiler,stage2,parser,HaddockLex,x) \
975 && $(call sdist_file,compiler,stage2,parser,HaddockParse,y) \
976 && $(call sdist_file,compiler,stage2,parser,Lexer,x) \
977 && $(call sdist_file,compiler,stage2,parser,Parser,y.pp) \
978 && $(call sdist_file,compiler,stage2,parser,ParserCore,y) \
979 && $(call sdist_file,utils/hpc,dist,,HpcParser,y) \
980 && $(call sdist_file,utils/genprimopcode,dist,,Lexer,x) \
981 && $(call sdist_file,utils/genprimopcode,dist,,Parser,y) \
982 && "$(RM)" $(RM_OPTS) -r compiler/stage[123] mk/build.mk \
983 && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | xargs "$(RM)" $(RM_OPTS) -r \
988 "$(TAR)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
990 sdist-manifest : $(SRC_DIST_TARBALL)
991 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
993 # Upload the distribution(s)
994 # Retrying is to work around buggy firewalls that corrupt large file transfers
996 ifneq "$(PublishLocation)" ""
998 $(call nTimes,10,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1001 ifeq "$(BootingFromHc)" "YES"
1002 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1005 # -----------------------------------------------------------------------------
1010 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1011 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1012 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1013 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1014 CLEAN_FILES += libraries/bootstrapping.conf
1015 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1016 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1018 clean : clean_files clean_libraries
1022 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1024 ifneq "$(NO_CLEAN_GMP)" "YES"
1025 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1026 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1031 "$(RM)" $(RM_OPTS) -r libraries/integer-gmp/gmp/objs
1032 "$(RM)" $(RM_OPTS) -r libraries/integer-gmp/gmp/gmpbuild
1035 .PHONY: clean_libraries
1036 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1037 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
1040 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1041 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1043 # We have to define a clean target for each library manually, because the
1044 # libraries/*/ghc.mk files are not included when we're cleaning.
1045 ifeq "$(CLEANING)" "YES"
1046 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1047 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1051 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1052 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1053 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1054 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1055 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1056 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1057 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1058 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1059 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1060 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1061 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1063 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1064 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1065 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1066 "$(RM)" $(RM_OPTS) -r $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1068 maintainer-clean : distclean
1069 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1070 "$(RM)" $(RM_OPTS) -r autom4te.cache libraries/*/autom4te.cache
1071 "$(RM)" $(RM_OPTS) ghc.spec
1072 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1073 $(PACKAGES) $(PACKAGES_STAGE2))
1074 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1075 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1076 $(PACKAGES) $(PACKAGES_STAGE2))
1077 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1078 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1079 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1080 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1081 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1083 .PHONY: all_libraries
1085 .PHONY: bootstrapping-files
1086 bootstrapping-files: $(OTHER_LIBS)
1087 bootstrapping-files: includes/ghcautoconf.h
1088 bootstrapping-files: includes/DerivedConstants.h
1089 bootstrapping-files: includes/GHCConstants.h