1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * Windows: should we have ghc-pkg-<version>?
17 # * should we be stripping things?
18 # * install libgmp.a, gmp.h
19 # * need to fix Cabal for new Windows layout, see
20 # Distribution/Simple/GHC.configureToolchain.
21 # * remove old Makefiles, add new stubs for building in subdirs
23 # * docs/docbook-cheat-sheet/Makefile
24 # * docs/ext-core/Makefile
26 # * docs/storage-mgmt/Makefile
28 # * rts/dotnet/Makefile
30 # * optionally install stage3?
31 # * add Makefiles for the rest of the utils/ programs that aren't built
32 # by default (need to exclude them from 'make all' too)
34 # Tickets we can now close, or fix and close:
36 # * 1693 make distclean
40 # * per-source-file dependencies instead of one .depend file?
41 # * eliminate undefined variables, and use --warn-undefined-variables?
42 # * put outputs from different ways in different subdirs of distdir/build,
43 # then we don't have to use -osuf/-hisuf. We would have to install
44 # them in different places too, so we'd need ghc-pkg support for packages
46 # * make PACKAGES generated by configure or sh boot?
47 # * we should use a directory of package.conf files rather than a single
48 # file for the inplace package database, so that we can express
49 # dependencies more accurately. Otherwise it's possible to get into
50 # a state where the package database is out of date, and the build
51 # system doesn't know.
53 # Approximate build order.
55 # The actual build order is defined by dependencies, and the phase
56 # ordering used to ensure correct ordering of makefile-generation; see
57 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
59 # * With bootstrapping compiler:
60 # o Build utils/ghc-cabal
61 # o Build utils/ghc-pkg
62 # o Build utils/hsc2hs
64 # o configure, generate package-data.mk and inplace-pkg-info
65 # o register each package into inplace/lib/package.conf
67 # * With bootstrapping compiler:
68 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
69 # o Build compiler (stage 1)
73 # o Build utils/* (except haddock)
74 # o Build compiler (stage 2)
76 # o Build utils/haddock
77 # o Build compiler (stage 3) (optional)
82 .PHONY: default all haddock
84 # We need second expansion for the way we handle directories, so that
86 # expands to the directory of a rule that uses a % pattern.
91 # Catch make if it runs away into an infinite loop
92 ifeq "$(MAKE_RESTARTS)" ""
93 else ifeq "$(MAKE_RESTARTS)" "1"
94 else ifeq "$(MAKE_RESTARTS)" "2"
96 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
99 # Just bring makefiles up to date:
100 .PHONY: just-makefiles
104 # -----------------------------------------------------------------------------
105 # Misc GNU make utils
108 space=$(nothing) $(nothing)
111 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
112 # by default, because that disables all the implicit rules, but there doesn't
113 # seem to be a good way to do that. This turns off all the old-style suffix
114 # rules, which does half the job and speeds up make quite a bit:
117 # -----------------------------------------------------------------------------
119 # to see the effective value used for a Makefile variable, do
120 # make show VALUE=MY_VALUE
124 @echo '$(VALUE)="$($(VALUE))"'
126 # -----------------------------------------------------------------------------
127 # Include subsidiary build-system bits
131 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
133 ifeq "$(ProjectVersion)" ""
134 $(error Please run ./configure first)
140 # (Optional) build-specific configuration
141 include mk/custom-settings.mk
143 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
144 ifeq "$(GhcLibWays)" ""
145 $(error $$(GhcLibWays) is empty, it must contain at least one way)
149 # -----------------------------------------------------------------------------
150 # Macros for standard targets
152 include rules/all-target.mk
153 include rules/clean-target.mk
155 # -----------------------------------------------------------------------------
158 $(eval $(call clean-target,inplace,,inplace))
160 # -----------------------------------------------------------------------------
161 # Whether to build dependencies or not
163 # When we're just doing 'make clean' or 'make show', then we don't need
164 # to build dependencies.
166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
167 NO_INCLUDE_DEPS = YES
168 NO_INCLUDE_PKGDATA = YES
170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
171 NO_INCLUDE_DEPS = YES
172 NO_INCLUDE_PKGDATA = YES
174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
175 NO_INCLUDE_DEPS = YES
176 # We want package-data.mk for show
179 # We don't haddock the bootstrapping libraries
180 libraries/hpc_dist-boot_DO_HADDOCK = NO
181 libraries/Cabal_dist-boot_DO_HADDOCK = NO
182 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
183 libraries/filepath_dist-boot_DO_HADDOCK = NO
184 libraries/binary_dist-boot_DO_HADDOCK = NO
185 libraries/bin-package-db_dist-boot_DO_HADDOCK = NO
187 # -----------------------------------------------------------------------------
190 include rules/way-prelims.mk
192 $(foreach way,$(ALL_WAYS),\
193 $(eval $(call way-prelims,$(way))))
195 # -----------------------------------------------------------------------------
198 include rules/distdir-way-opts.mk
200 # -----------------------------------------------------------------------------
201 # Finding source files and object files
203 include rules/hs-sources.mk
204 include rules/c-sources.mk
205 include rules/includes-sources.mk
206 include rules/hs-objs.mk
207 include rules/c-objs.mk
208 include rules/cmm-objs.mk
210 # -----------------------------------------------------------------------------
213 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
214 # so we don't make any when cleaning.
215 ifneq "$(CLEANING)" "YES"
217 include rules/hs-suffix-rules-srcdir.mk
218 include rules/hs-suffix-rules.mk
220 # -----------------------------------------------------------------------------
221 # Suffix rules for .hi files
223 include rules/hi-rule.mk
225 $(foreach way,$(ALL_WAYS),\
226 $(eval $(call hi-rule,$(way))))
228 #-----------------------------------------------------------------------------
229 # C-related suffix rules
231 include rules/c-suffix-rules.mk
233 #-----------------------------------------------------------------------------
234 # CMM-related suffix rules
236 include rules/cmm-suffix-rules.mk
240 # -----------------------------------------------------------------------------
241 # Building package-data.mk files from .cabal files
243 include rules/package-config.mk
245 # -----------------------------------------------------------------------------
246 # Building dependencies
248 include rules/build-dependencies.mk
250 # -----------------------------------------------------------------------------
251 # Build package-data.mk files
253 include rules/build-package-data.mk
255 # -----------------------------------------------------------------------------
256 # Build and install a program
258 include rules/build-prog.mk
259 include rules/shell-wrapper.mk
261 # -----------------------------------------------------------------------------
262 # Build a perl script
264 include rules/build-perl.mk
266 # -----------------------------------------------------------------------------
269 include rules/build-package.mk
270 include rules/build-package-way.mk
271 include rules/haddock.mk
272 include rules/tags-package.mk
274 # -----------------------------------------------------------------------------
275 # Registering hand-written package descriptions (used in libffi and rts)
277 include rules/manual-package-config.mk
279 # -----------------------------------------------------------------------------
282 include rules/docbook.mk
284 # -----------------------------------------------------------------------------
287 include rules/bindist.mk
289 # -----------------------------------------------------------------------------
292 define addPackage # args: $1 = package, $2 = condition
294 ifeq "$$(CLEANING)" "YES"
306 $(eval $(call addPackage,ghc-prim))
307 ifeq "$(CLEANING)" "YES"
308 $(eval $(call addPackage,integer-gmp))
309 $(eval $(call addPackage,integer-simple))
311 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
313 $(eval $(call addPackage,base))
314 $(eval $(call addPackage,filepath))
315 $(eval $(call addPackage,array))
316 $(eval $(call addPackage,bytestring))
317 $(eval $(call addPackage,containers))
319 $(eval $(call addPackage,Win32,($$(Windows),YES)))
320 $(eval $(call addPackage,unix,($$(Windows),NO)))
322 $(eval $(call addPackage,old-locale))
323 $(eval $(call addPackage,old-time))
324 $(eval $(call addPackage,time))
325 $(eval $(call addPackage,directory))
326 $(eval $(call addPackage,process))
327 $(eval $(call addPackage,random))
328 $(eval $(call addPackage,extensible-exceptions))
329 $(eval $(call addPackage,haskell98))
330 $(eval $(call addPackage,hpc))
331 $(eval $(call addPackage,pretty))
332 $(eval $(call addPackage,template-haskell))
333 $(eval $(call addPackage,Cabal))
334 $(eval $(call addPackage,binary))
335 $(eval $(call addPackage,bin-package-db))
336 $(eval $(call addPackage,mtl))
337 $(eval $(call addPackage,utf8-string))
339 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
341 $(eval $(call addPackage,haskeline))
343 $(foreach pkg,$(EXTRA_PACKAGES),$(eval $(call addPackage,$(pkg))))
345 ifneq "$(BootingFromHc)" "YES"
348 dph/dph-prim-interface \
355 # We assume that the stage0 compiler has a suitable bytestring package,
356 # so we don't have to include it below.
357 BOOT_PKGS = Cabal hpc extensible-exceptions binary bin-package-db
359 # The actual .a and .so/.dll files: needed for dependencies.
360 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
361 ifeq "$(BuildSharedLibs)" "YES"
362 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
364 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
366 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
367 ifeq "$(BuildSharedLibs)" "YES"
368 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
371 # We cannot run ghc-cabal to configure a package until we have
372 # configured and registered all of its dependencies. So the following
373 # hack forces all the configure steps to happen in exactly the following order:
375 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
377 # Ideally we should use the correct dependencies here to allow more
378 # parallelism, but we don't know the dependencies until we've
379 # generated the pacakge-data.mk files.
381 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
382 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
385 ifneq "$(BINDIST)" "YES"
387 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
389 # the GHC package doesn't live in libraries/, so we add its dependency manually:
390 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
391 fixed_pkg_prev:=compiler/stage2/package-data.mk
393 # and continue with PACKAGES_STAGE2, which depend on GHC:
394 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
396 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
397 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
398 # haddock depends on ghc and some libraries, but depending on GHC's
399 # package-data.mk is sufficient, as that in turn depends on all the
401 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
403 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
404 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
406 # add the final two package.conf dependencies: ghc-prim depends on RTS,
407 # and RTS depends on libffi.
408 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
409 rts/package.conf.inplace : libffi/package.conf.inplace
412 # -----------------------------------------------------------------------------
415 # Don't try to delete directories:
418 # Create build directories on demand. NB. the | below: this indicates
419 # that $(MKDIRHIER) is an order-only dependency, which means that this
420 # rule fires after building mkdirhier, but we won't try to recreate
421 # directories if mkdirhier changes.
425 # -----------------------------------------------------------------------------
426 # Special magic for the ghc-prim package
428 # We want the ghc-prim package to include the GHC.Prim module when it
429 # is registered, but not when it is built, because GHC.Prim is not a
430 # real source module, it is built-in to GHC. The old build system did
431 # this using Setup.hs, but we can't do that here, so we have a flag to
432 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
433 # remains compatible with the old build system for the time being).
434 # GHC.Prim module in the ghc-prim package with a flag:
436 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
438 # And then we strip it out again before building the package:
439 define libraries/ghc-prim_PACKAGE_MAGIC
440 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
443 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
445 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
446 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
448 # Required so that Haddock documents the primops.
449 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
451 # -----------------------------------------------------------------------------
452 # Include build instructions from all subdirs
454 # For the rationale behind the build phases, see
455 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
457 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
458 # "dist", just read the package-data.mk file, do not build anything".
460 # We carefully engineer things so that we can build the
461 # package-data.mk files early on: they depend only on a few tools also
462 # built early. Having got the package-data.mk files built, we can
463 # restart make with up-to-date information about all the packages
464 # (this is phase 0). The remaining problem is the .depend files:
466 # - .depend files in libraries need the stage 1 compiler to build
467 # - ghc/stage1/.depend needs compiler/stage1 built
468 # - compiler/stage1/.depend needs the bootstrap libs built
470 # GHC 6.11+ can build a .depend file without having built the
471 # dependencies of the package, but we can't rely on the bootstrapping
472 # compiler being able to do this, which is why we have to separate the
473 # three phases above.
475 # So this is the final ordering:
477 # Phase 0 : all package-data.mk files
478 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
479 # Phase 1 : .depend files for bootstrap libs
481 # Phase 2 : compiler/stage1/.depend
482 # (requires bootstrap libs and genprimopcode)
483 # Phase 3 : ghc/stage1/.depend
484 # (requires compiler/stage1)
486 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
490 ifneq "$(BINDIST)" "YES"
499 libraries/Cabal/doc \
503 ifneq "$(GhcUnregisterised)" "YES"
509 ifneq "$(BINDIST)" "YES"
522 ifneq "$(BINDIST)" "YES"
528 ifneq "$(HADDOCK_DOCS)" "NO"
534 ifneq "$(CLEANING)" "YES"
536 $(patsubst %, libraries/%, $(PACKAGES))
539 ifneq "$(BootingFromHc)" "YES"
544 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
545 BUILD_DIRS += libraries/integer-gmp/gmp
557 ifeq "$(Windows)" "YES"
562 BUILD_DIRS += utils/count_lines
563 BUILD_DIRS += utils/compare_sizes
565 ifneq "$(CLEANING)" "YES"
566 # After compiler/, because these packages depend on it
568 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
571 # XXX libraries/% must come before any programs built with stage1, see
572 # Note [lib-depends].
575 $(foreach lib,$(BOOT_PKGS),$(eval \
576 libraries/$(lib)_dist-boot_DISABLE = YES))
579 ifneq "$(findstring $(phase),0 1)" ""
580 # We can build deps for compiler/stage1 in phase 2
581 compiler_stage1_DISABLE = YES
584 ifneq "$(findstring $(phase),0 1 2)" ""
585 ghc_stage1_DISABLE = YES
588 ifneq "$(CLEANING)" "YES"
589 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
590 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
592 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
593 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
595 $(error Unknown integer library: $(INTEGER_LIBRARY))
600 ifneq "$(findstring $(phase),0 1 2 3)" ""
601 # In phases 0-3, we disable stage2-3, the full libraries and haddock
602 utils/haddock_dist_DISABLE = YES
603 utils/runghc_dist_DISABLE = YES
604 utils/ghctags_dist_DISABLE = YES
605 utils/hpc_dist_DISABLE = YES
606 utils/hsc2hs_dist-install_DISABLE = YES
607 utils/ghc-pkg_dist-install_DISABLE = YES
608 utils/compare_sizes_dist_DISABLE = YES
609 compiler_stage2_DISABLE = YES
610 compiler_stage3_DISABLE = YES
611 ghc_stage2_DISABLE = YES
612 ghc_stage3_DISABLE = YES
613 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
614 libraries/$(lib)_dist-install_DISABLE = YES))
617 # These packages don't pass the Cabal checks because hs-source-dirs
618 # points outside the source directory. This isn't a real problem in
619 # these cases, so we just skip checking them.
620 CHECKED_libraries/dph/dph-seq = YES
621 CHECKED_libraries/dph/dph-par = YES
622 # In compiler's case, include-dirs points outside of the source tree
623 CHECKED_compiler = YES
625 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
627 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
628 GhcLibHcOpts += -fno-warn-deprecated-flags
629 GhcBootLibHcOpts += -fno-warn-deprecated-flags
631 # ----------------------------------------------
632 # Per-package compiler flags
634 # If you want to add per-package compiler flags, this
635 # is the place to do it. Do it like this for package <pkg>
637 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
638 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
641 # Add $(GhcLibHcOpts) to all library builds
642 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
644 # XXX Hack; remove this
646 $(foreach pkg,$(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += -Wwarn))
648 # XXX Hack; remove this
649 # Use -Wwarn for 'binary' becuase it has redundant UNPACK pragmas
650 libraries/binary_dist-install_HC_OPTS += -Wwarn
651 libraries/binary_dist-boot_HC_OPTS += -Wwarn
653 # ----------------------------------------------
654 # A useful pseudo-target
656 stage1_libs : $(ALL_STAGE1_LIBS)
658 ifeq "$(HADDOCK_DOCS)" "YES"
659 libraries/index.html: $(ALL_HADDOCK_FILES)
660 cd libraries && sh gen_contents_index --inplace
661 $(eval $(call all-target,library_doc_index,libraries/index.html))
662 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
663 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
664 libraries/haddock*.js libraries/index*.html libraries/*.gif
667 ifeq "$(CHECK_PACKAGES)" "YES"
671 # -----------------------------------------------------------------------------
672 # Bootstrapping libraries
674 # We need to build a few libraries with the installed GHC, since GHC itself
675 # and some of the tools depend on them:
677 ifneq "$(BINDIST)" "YES"
679 ifneq "$(BOOTSTRAPPING_CONF)" ""
680 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
681 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
685 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
687 # These three libraries do not depend on each other, so we can build
690 $(eval $(call build-package,libraries/hpc,dist-boot,0))
691 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
692 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
693 $(eval $(call build-package,libraries/binary,dist-boot,0))
694 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
696 # register the boot packages in strict sequence, because running
697 # multiple ghc-pkgs in parallel doesn't work (registrations may get
700 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
702 compiler/stage1/package-data.mk : \
703 libraries/Cabal/dist-boot/package-data.mk \
704 libraries/hpc/dist-boot/package-data.mk \
705 libraries/extensible-exceptions/dist-boot/package-data.mk \
706 libraries/bin-package-db/dist-boot/package-data.mk
708 # These are necessary because the bootstrapping compiler may not know
709 # about cross-package dependencies:
710 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
711 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
713 # A few careful dependencies between bootstrapping packages. When we
714 # can rely on the stage 0 compiler being able to generate
715 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
716 # these, and also some of the phases.
718 # If you miss any out here, then 'make -j8' will probably tell you.
720 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
722 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
724 # Make sure we have all the GHCi libs by the time we've built
725 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
726 # GHCI libs, and we don't have a better way to express that dependency.
728 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
729 $(compiler_stage2_GHCI_LIB)
731 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
735 # -----------------------------------------------------------------------------
736 # Creating a local mingw copy on Windows
738 ifeq "$(Windows)" "YES"
740 install : install_mingw
741 .PHONY: install_mingw
742 install_mingw : $(INPLACE_MINGW)
743 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
745 install : install_perl
747 install_perl : $(INPLACE_PERL)
748 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
752 ifneq "$(BINDIST)" "YES"
753 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
754 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
755 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
758 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
759 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
761 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
763 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
764 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
766 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
774 # -----------------------------------------------------------------------------
777 install: install_packages install_libs install_libexecs install_headers \
778 install_libexec_scripts install_bins install_docs \
781 install_bins: $(INSTALL_BINS)
782 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
783 for i in $(INSTALL_BINS); do \
784 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
787 install_libs: $(INSTALL_LIBS)
788 $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
789 for i in $(INSTALL_LIBS); do \
792 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
793 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
795 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
797 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
799 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
801 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
805 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
806 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
809 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
810 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
811 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
815 install_libexecs: $(INSTALL_LIBEXECS)
816 ifeq "$(INSTALL_LIBEXECS)" ""
819 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
820 for i in $(INSTALL_LIBEXECS); do \
821 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
823 # We rename ghc-stage2, so that the right program name is used in error
825 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
828 install_topdirs: $(INSTALL_TOPDIRS)
829 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
830 for i in $(INSTALL_TOPDIRS); do \
831 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
834 install_headers: $(INSTALL_HEADERS)
835 $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
836 for i in $(INSTALL_HEADERS); do \
837 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
840 install_docs: $(INSTALL_DOCS)
841 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
842 ifneq "$(INSTALL_DOCS)" ""
843 for i in $(INSTALL_DOCS); do \
844 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
847 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
848 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
849 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
850 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
851 for i in $(INSTALL_LIBRARY_DOCS); do \
852 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
854 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
855 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
857 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
858 for i in $(INSTALL_HTML_DOC_DIRS); do \
859 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
860 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
864 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
866 # Install packages in the right order, so that ghc-pkg doesn't complain.
867 # Also, install ghc-pkg first.
868 ifeq "$(Windows)" "NO"
869 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
870 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
872 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
873 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
876 INSTALLED_PACKAGES := $(filter-out haskeline mtl terminfo utf8-string,$(PACKAGES))
877 ifeq "$(InstallExtraPackages)" "NO"
878 INSTALLED_PACKAGES := $(filter-out $(EXTRA_PACKAGES), $(INSTALLED_PACKAGES))
881 HIDDEN_PACKAGES = binary
883 define set_INSTALL_DISTDIR
884 # $1 = libraries/base, $2 = dist-install
886 # INSTALL_DISTDIR_libraries/base = dist-install
887 INSTALL_DISTDIR_$1 = $2
890 $(eval $(foreach p,$(INSTALLED_PACKAGES) $(PACKAGES_STAGE2),\
891 $(call set_INSTALL_DISTDIR,libraries/$p,dist-install)))
892 INSTALL_DISTDIR_compiler = stage2
894 ALL_INSTALLED_PACKAGES = $(addprefix libraries/,$(INSTALLED_PACKAGES)) \
896 $(addprefix libraries/,$(PACKAGES_STAGE2))
898 install_packages: install_libexecs
899 install_packages: libffi/package.conf.install rts/package.conf.install
900 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
901 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
902 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
903 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
904 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
905 $(foreach p, $(ALL_INSTALLED_PACKAGES),\
906 "$(GHC_CABAL_INPLACE)" install \
907 "$(INSTALLED_GHC_REAL)" \
908 "$(INSTALLED_GHC_PKG_REAL)" \
910 "$(DESTDIR)$(topdir)" \
911 $p $(INSTALL_DISTDIR_$p) \
912 '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries' \
913 $(RelocatableBuild) &&) true
914 $(foreach p, $(HIDDEN_PACKAGES),\
915 "$(INSTALLED_GHC_PKG_REAL)" --global-conf "$(INSTALLED_PACKAGE_CONF)" \
918 # -----------------------------------------------------------------------------
919 # Binary distributions
921 ifneq "$(CLEANING)" "YES"
922 # This rule seems to hold some files open on Windows which prevents
923 # cleaning, perhaps due to the $(wildcard).
925 $(eval $(call bindist,.,\
929 configure config.sub config.guess install-sh \
933 $(INPLACE_BIN)/mkdirhier \
934 $(INPLACE_BIN)/ghc-cabal \
935 utils/ghc-pwd/ghc-pwd \
936 $(BINDIST_WRAPPERS) \
937 $(BINDIST_PERL_SOURCES) \
941 $(includes_H_CONFIG) \
942 $(includes_H_PLATFORM) \
943 $(includes_H_FILES) \
944 includes/ghcconfig.h \
945 includes/rts/Config.h \
947 $(INSTALL_LIBEXECS) \
948 $(INSTALL_LIBEXEC_SCRIPTS) \
951 $(INSTALL_MANPAGES) \
953 $(INSTALL_LIBRARY_DOCS) \
954 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
956 compiler/stage2/doc \
957 $(wildcard libraries/*/dist-install/doc/) \
958 $(wildcard libraries/*/*/dist-install/doc/) \
959 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
960 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
964 libraries/gen_contents_index \
965 libraries/prologue.txt \
966 libraries/dph/LICENSE \
969 # mk/project.mk gets an absolute path, so we manually include it in
970 # the bindist with a relative path
972 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
974 unix-binary-dist-prep:
975 "$(RM)" $(RM_OPTS_REC) bindistprep/
976 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
977 set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
978 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
979 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
980 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
981 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
982 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
983 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
984 cd $(BIN_DIST_PREP_DIR) && autoreconf
985 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
986 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
987 # tree then we want to include the real file, not a symlink to it
988 cd bindistprep && "$(TAR)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
990 windows-binary-dist-prep:
991 "$(RM)" $(RM_OPTS_REC) bindistprep/
992 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
993 cd bindistprep && "$(TAR)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
997 @echo No ISCC, so not making installer
999 "$(ISCC)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1002 # tryTimes tries to run its third argument multiple times, until it
1003 # succeeds. Don't call it directly; call try10Times instead.
1004 # The first and second argument to tryTimes are lists of values.
1005 # The length of the first argument is the number of times we have
1006 # already tried. The length of the second argument is the number more
1007 # times we will try.
1008 tryTimes = $(if $2, \
1009 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1010 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1013 # Try to run the argument 10 times. If all 10 fail, fail.
1014 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1016 .PHONY: publish-binary-dist
1017 publish-binary-dist:
1018 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1019 ifeq "$(mingw32_TARGET_OS)" "1"
1020 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1023 .PHONY: publish-docs
1025 $(call try10Times,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
1027 # -----------------------------------------------------------------------------
1028 # Source distributions
1036 # A source dist is built from a complete build tree, because we
1037 # require some extra files not contained in a darcs checkout: the
1038 # output from Happy and Alex, for example.
1040 # The steps performed by 'make dist' are as follows:
1041 # - create a complete link-tree of the current build tree in /tmp
1042 # - run 'make distclean' on that tree
1043 # - remove a bunch of other files that we know shouldn't be in the dist
1044 # - tar up first the extralibs package, then the main source package
1047 # Directory in which we're going to build the src dist
1049 SRC_DIST_NAME=ghc-$(ProjectVersion)
1050 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1053 # Files to include in source distributions
1055 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1057 configure.ac config.guess config.sub configure \
1058 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1059 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1060 boot boot-pkgs packages ghc.mk
1062 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1065 echo $(ProjectVersion) >VERSION
1070 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1071 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1072 # "stage2" is the dist dir.
1074 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1075 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1080 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1081 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1082 mkdir $(SRC_DIST_DIR)
1083 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1084 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1085 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1086 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1087 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1088 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1089 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1090 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1091 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1092 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1093 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1094 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1095 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1096 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1097 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1098 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1099 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1103 "$(TAR)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1105 sdist-manifest : $(SRC_DIST_TARBALL)
1106 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1108 # Upload the distribution(s)
1109 # Retrying is to work around buggy firewalls that corrupt large file transfers
1111 ifneq "$(PublishLocation)" ""
1113 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1116 ifeq "$(BootingFromHc)" "YES"
1117 # In a normal build we use GHC to compile C files (see
1118 # rules/c-suffix-rules.mk), which passes a number of its own options
1119 # to the C compiler. So when bootstrapping we have to provide these
1120 # flags explicitly to C compilations.
1121 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1122 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1123 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1126 # -----------------------------------------------------------------------------
1127 # sdisting libraries
1129 # Use manually, with e.g.:
1130 # make sdist_directory
1133 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1135 # -----------------------------------------------------------------------------
1140 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1141 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1142 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1143 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1144 CLEAN_FILES += libraries/bootstrapping.conf
1145 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1146 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1148 clean : clean_files clean_libraries
1152 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1154 ifneq "$(NO_CLEAN_GMP)" "YES"
1155 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1156 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1161 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1162 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1165 .PHONY: clean_libraries
1166 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1167 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
1170 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1171 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1173 # We have to define a clean target for each library manually, because the
1174 # libraries/*/ghc.mk files are not included when we're cleaning.
1175 ifeq "$(CLEANING)" "YES"
1176 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1177 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1180 clean : clean_bindistprep
1181 .PHONY: clean_bindistprep
1183 "$(RM)" $(RM_OPTS_REC) bindistprep/
1186 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1187 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1188 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1189 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1190 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1191 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1192 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1193 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1194 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1195 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1196 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1198 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1199 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1200 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1201 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1203 maintainer-clean : distclean
1204 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1205 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1206 "$(RM)" $(RM_OPTS) ghc.spec
1207 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1208 $(PACKAGES) $(PACKAGES_STAGE2))
1209 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1210 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1211 $(PACKAGES) $(PACKAGES_STAGE2))
1212 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1213 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1214 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1215 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1216 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1218 .PHONY: all_libraries
1220 .PHONY: bootstrapping-files
1221 bootstrapping-files: $(OTHER_LIBS)
1222 bootstrapping-files: includes/ghcautoconf.h
1223 bootstrapping-files: includes/DerivedConstants.h
1224 bootstrapping-files: includes/GHCConstants.h