1 # -----------------------------------------------------------------------------
3 # (c) 2009 The University of Glasgow
5 # This file is part of the GHC build system.
7 # To understand how the build system works and how to modify it, see
8 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture
9 # http://hackage.haskell.org/trac/ghc/wiki/Building/Modifying
11 # -----------------------------------------------------------------------------
15 # * finish installation
16 # * Windows: should we have ghc-pkg-<version>?
17 # * should we be stripping things?
18 # * install libgmp.a, gmp.h
19 # * need to fix Cabal for new Windows layout, see
20 # Distribution/Simple/GHC.configureToolchain.
21 # * remove old Makefiles, add new stubs for building in subdirs
23 # * docs/docbook-cheat-sheet/Makefile
24 # * docs/ext-core/Makefile
26 # * docs/storage-mgmt/Makefile
28 # * rts/dotnet/Makefile
30 # * optionally install stage3?
31 # * add Makefiles for the rest of the utils/ programs that aren't built
32 # by default (need to exclude them from 'make all' too)
34 # Tickets we can now close, or fix and close:
36 # * 1693 make distclean
40 # * per-source-file dependencies instead of one .depend file?
41 # * eliminate undefined variables, and use --warn-undefined-variables?
42 # * put outputs from different ways in different subdirs of distdir/build,
43 # then we don't have to use -osuf/-hisuf. We would have to install
44 # them in different places too, so we'd need ghc-pkg support for packages
46 # * make PACKAGES generated by './configure' or 'perl boot'?
47 # * we should use a directory of package.conf files rather than a single
48 # file for the inplace package database, so that we can express
49 # dependencies more accurately. Otherwise it's possible to get into
50 # a state where the package database is out of date, and the build
51 # system doesn't know.
53 # Approximate build order.
55 # The actual build order is defined by dependencies, and the phase
56 # ordering used to ensure correct ordering of makefile-generation; see
57 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
59 # * With bootstrapping compiler:
60 # o Build utils/ghc-cabal
61 # o Build utils/ghc-pkg
62 # o Build utils/hsc2hs
64 # o configure, generate package-data.mk and inplace-pkg-info
65 # o register each package into inplace/lib/package.conf
67 # * With bootstrapping compiler:
68 # o Build libraries/{filepath,hpc,extensible-exceptions,Cabal}
69 # o Build compiler (stage 1)
73 # o Build utils/* (except haddock)
74 # o Build compiler (stage 2)
76 # o Build utils/haddock
77 # o Build compiler (stage 3) (optional)
82 .PHONY: default all haddock
84 # We need second expansion for the way we handle directories, so that
86 # expands to the directory of a rule that uses a % pattern.
91 # Catch make if it runs away into an infinite loop
92 ifeq "$(MAKE_RESTARTS)" ""
93 else ifeq "$(MAKE_RESTARTS)" "1"
94 else ifeq "$(MAKE_RESTARTS)" "2"
96 $(error Make has restarted itself $(MAKE_RESTARTS) times; is there a makefile bug?)
99 # Just bring makefiles up to date:
100 .PHONY: just-makefiles
104 # -----------------------------------------------------------------------------
105 # Misc GNU make utils
108 space=$(nothing) $(nothing)
111 # Cancel all suffix rules. Ideally we'd like to have 'make -r' turned on
112 # by default, because that disables all the implicit rules, but there doesn't
113 # seem to be a good way to do that. This turns off all the old-style suffix
114 # rules, which does half the job and speeds up make quite a bit:
117 # -----------------------------------------------------------------------------
119 # to see the effective value used for a Makefile variable, do
120 # make show VALUE=MY_VALUE
124 @echo '$(VALUE)="$($(VALUE))"'
126 # -----------------------------------------------------------------------------
127 # Include subsidiary build-system bits
131 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
133 ifeq "$(ProjectVersion)" ""
134 $(error Please run ./configure first)
140 # (Optional) build-specific configuration
141 include mk/custom-settings.mk
143 ifeq "$(findstring clean,$(MAKECMDGOALS))" ""
144 ifeq "$(GhcLibWays)" ""
145 $(error $$(GhcLibWays) is empty, it must contain at least one way)
149 # -----------------------------------------------------------------------------
150 # Macros for standard targets
152 include rules/all-target.mk
153 include rules/clean-target.mk
155 # -----------------------------------------------------------------------------
158 $(eval $(call clean-target,inplace,,inplace))
160 # -----------------------------------------------------------------------------
161 # Whether to build dependencies or not
163 # When we're just doing 'make clean' or 'make show', then we don't need
164 # to build dependencies.
166 ifneq "$(findstring clean,$(MAKECMDGOALS))" ""
167 NO_INCLUDE_DEPS = YES
168 NO_INCLUDE_PKGDATA = YES
170 ifneq "$(findstring bootstrapping-files,$(MAKECMDGOALS))" ""
171 NO_INCLUDE_DEPS = YES
172 NO_INCLUDE_PKGDATA = YES
174 ifeq "$(findstring show,$(MAKECMDGOALS))" "show"
175 NO_INCLUDE_DEPS = YES
176 # We want package-data.mk for show
179 # We don't haddock the bootstrapping libraries
180 libraries/hpc_dist-boot_DO_HADDOCK = NO
181 libraries/Cabal_dist-boot_DO_HADDOCK = NO
182 libraries/extensible-exceptions_dist-boot_DO_HADDOCK = NO
183 libraries/filepath_dist-boot_DO_HADDOCK = NO
184 libraries/binary_dist-boot_DO_HADDOCK = NO
185 libraries/bin-package-db_dist-boot_DO_HADDOCK = NO
187 # -----------------------------------------------------------------------------
190 include rules/way-prelims.mk
192 $(foreach way,$(ALL_WAYS),\
193 $(eval $(call way-prelims,$(way))))
195 # -----------------------------------------------------------------------------
198 include rules/distdir-way-opts.mk
200 # -----------------------------------------------------------------------------
201 # Finding source files and object files
203 include rules/hs-sources.mk
204 include rules/c-sources.mk
205 include rules/includes-sources.mk
206 include rules/hs-objs.mk
207 include rules/c-objs.mk
208 include rules/cmm-objs.mk
210 # -----------------------------------------------------------------------------
213 # Suffix rules cause "make clean" to fail on Windows (trac #3233)
214 # so we don't make any when cleaning.
215 ifneq "$(CLEANING)" "YES"
217 include rules/hs-suffix-rules-srcdir.mk
218 include rules/hs-suffix-rules.mk
220 # -----------------------------------------------------------------------------
221 # Suffix rules for .hi files
223 include rules/hi-rule.mk
225 $(foreach way,$(ALL_WAYS),\
226 $(eval $(call hi-rule,$(way))))
228 #-----------------------------------------------------------------------------
229 # C-related suffix rules
231 include rules/c-suffix-rules.mk
233 #-----------------------------------------------------------------------------
234 # CMM-related suffix rules
236 include rules/cmm-suffix-rules.mk
240 # -----------------------------------------------------------------------------
241 # Building package-data.mk files from .cabal files
243 include rules/package-config.mk
245 # -----------------------------------------------------------------------------
246 # Building dependencies
248 include rules/build-dependencies.mk
250 # -----------------------------------------------------------------------------
251 # Build package-data.mk files
253 include rules/build-package-data.mk
255 # -----------------------------------------------------------------------------
256 # Build and install a program
258 include rules/build-prog.mk
259 include rules/shell-wrapper.mk
261 # -----------------------------------------------------------------------------
262 # Build a perl script
264 include rules/build-perl.mk
266 # -----------------------------------------------------------------------------
269 include rules/build-package.mk
270 include rules/build-package-way.mk
271 include rules/haddock.mk
272 include rules/tags-package.mk
274 # -----------------------------------------------------------------------------
275 # Registering hand-written package descriptions (used in libffi and rts)
277 include rules/manual-package-config.mk
279 # -----------------------------------------------------------------------------
282 include rules/docbook.mk
284 # -----------------------------------------------------------------------------
287 include rules/bindist.mk
289 # -----------------------------------------------------------------------------
292 define addPackage # args: $1 = package, $2 = condition
294 ifeq "$$(CLEANING)" "YES"
306 $(eval $(call addPackage,ghc-prim))
307 ifeq "$(CLEANING)" "YES"
308 $(eval $(call addPackage,integer-gmp))
309 $(eval $(call addPackage,integer-simple))
311 $(eval $(call addPackage,$(INTEGER_LIBRARY)))
313 $(eval $(call addPackage,base))
314 $(eval $(call addPackage,filepath))
315 $(eval $(call addPackage,array))
316 $(eval $(call addPackage,bytestring))
317 $(eval $(call addPackage,containers))
319 $(eval $(call addPackage,Win32,($$(Windows),YES)))
320 $(eval $(call addPackage,unix,($$(Windows),NO)))
322 $(eval $(call addPackage,old-locale))
323 $(eval $(call addPackage,old-time))
324 $(eval $(call addPackage,time))
325 $(eval $(call addPackage,directory))
326 $(eval $(call addPackage,process))
327 $(eval $(call addPackage,random))
328 $(eval $(call addPackage,extensible-exceptions))
329 $(eval $(call addPackage,haskell98))
330 $(eval $(call addPackage,haskell2010))
331 $(eval $(call addPackage,hpc))
332 $(eval $(call addPackage,pretty))
333 $(eval $(call addPackage,template-haskell))
334 $(eval $(call addPackage,Cabal))
335 $(eval $(call addPackage,binary))
336 $(eval $(call addPackage,bin-package-db))
337 $(eval $(call addPackage,mtl))
338 $(eval $(call addPackage,utf8-string))
339 $(eval $(call addPackage,xhtml))
341 $(eval $(call addPackage,terminfo,($$(Windows),NO)))
343 $(eval $(call addPackage,haskeline))
345 $(foreach pkg,$(EXTRA_PACKAGES),$(eval $(call addPackage,$(pkg))))
347 ifneq "$(BootingFromHc)" "YES"
349 ifneq "$(GhcProfiled)" "YES"
350 # DPH uses Template Haskell, and Template Haskell doesn't work
351 # with a profiled compiler. So if stage-2 is profile, don't build DPH
354 dph/dph-prim-interface \
362 # We assume that the stage0 compiler has a suitable bytestring package,
363 # so we don't have to include it below.
364 BOOT_PKGS = Cabal hpc extensible-exceptions binary bin-package-db
366 BOOT_PKG_CONSTRAINTS := $(foreach p,$(BOOT_PKGS),--constraint "$p == $(shell grep -i "^Version:" libraries/$p/$p.cabal | sed "s/[^0-9.]//g")")
368 # The actual .a and .so/.dll files: needed for dependencies.
369 ALL_STAGE1_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_v_LIB))
370 ifeq "$(BuildSharedLibs)" "YES"
371 ALL_STAGE1_LIBS += $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_dyn_LIB))
373 BOOT_LIBS = $(foreach lib,$(BOOT_PKGS),$(libraries/$(lib)_dist-boot_v_LIB))
375 OTHER_LIBS = libffi/dist-install/build/libHSffi$(v_libsuf) libffi/dist-install/build/HSffi.o
376 ifeq "$(BuildSharedLibs)" "YES"
377 OTHER_LIBS += libffi/dist-install/build/libHSffi$(dyn_libsuf)
380 # We cannot run ghc-cabal to configure a package until we have
381 # configured and registered all of its dependencies. So the following
382 # hack forces all the configure steps to happen in exactly the following order:
384 # $(PACKAGES) ghc(stage2) $(PACKAGES_STAGE2)
386 # Ideally we should use the correct dependencies here to allow more
387 # parallelism, but we don't know the dependencies until we've
388 # generated the pacakge-data.mk files.
390 libraries/$1/$2/package-data.mk : $$(GHC_PKG_INPLACE) $$(fixed_pkg_prev)
391 fixed_pkg_prev:=libraries/$1/$2/package-data.mk
394 ifneq "$(BINDIST)" "YES"
396 $(foreach pkg,$(PACKAGES),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
398 # the GHC package doesn't live in libraries/, so we add its dependency manually:
399 compiler/stage2/package-data.mk: $(fixed_pkg_prev)
400 fixed_pkg_prev:=compiler/stage2/package-data.mk
402 # and continue with PACKAGES_STAGE2, which depend on GHC:
403 $(foreach pkg,$(PACKAGES_STAGE2),$(eval $(call fixed_pkg_dep,$(pkg),dist-install)))
405 ghc/stage1/package-data.mk: compiler/stage1/package-data.mk
406 ghc/stage2/package-data.mk: compiler/stage2/package-data.mk
407 # haddock depends on ghc and some libraries, but depending on GHC's
408 # package-data.mk is sufficient, as that in turn depends on all the
410 utils/haddock/dist/package-data.mk: compiler/stage2/package-data.mk
412 utils/ghc-pkg/dist-install/package-data.mk: compiler/stage2/package-data.mk
413 utils/hsc2hs/dist-install/package-data.mk: compiler/stage2/package-data.mk
414 utils/compare_sizes/dist/package-data.mk: compiler/stage2/package-data.mk
416 # add the final two package.conf dependencies: ghc-prim depends on RTS,
417 # and RTS depends on libffi.
418 libraries/ghc-prim/dist-install/package-data.mk : rts/package.conf.inplace
419 rts/package.conf.inplace : libffi/package.conf.inplace
422 # -----------------------------------------------------------------------------
425 # Don't try to delete directories:
428 # Create build directories on demand. NB. the | below: this indicates
429 # that $(MKDIRHIER) is an order-only dependency, which means that this
430 # rule fires after building mkdirhier, but we won't try to recreate
431 # directories if mkdirhier changes.
435 # -----------------------------------------------------------------------------
436 # Special magic for the ghc-prim package
438 # We want the ghc-prim package to include the GHC.Prim module when it
439 # is registered, but not when it is built, because GHC.Prim is not a
440 # real source module, it is built-in to GHC. The old build system did
441 # this using Setup.hs, but we can't do that here, so we have a flag to
442 # enable GHC.Prim in the .cabal file (so that the ghc-prim package
443 # remains compatible with the old build system for the time being).
444 # GHC.Prim module in the ghc-prim package with a flag:
446 libraries/ghc-prim_CONFIGURE_OPTS += --flag=include-ghc-prim
448 # And then we strip it out again before building the package:
449 define libraries/ghc-prim_PACKAGE_MAGIC
450 libraries/ghc-prim_dist-install_MODULES := $$(filter-out GHC.Prim,$$(libraries/ghc-prim_dist-install_MODULES))
453 PRIMOPS_TXT = $(GHC_COMPILER_DIR)/prelude/primops.txt
455 libraries/ghc-prim/dist-install/build/GHC/PrimopWrappers.hs : $(GENPRIMOP_INPLACE) $(PRIMOPS_TXT) | $$(dir $$@)/.
456 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers <$(PRIMOPS_TXT) >$@
458 # Required so that Haddock documents the primops.
459 libraries/ghc-prim_dist-install_EXTRA_HADDOCK_SRCS = libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs
461 # -----------------------------------------------------------------------------
462 # Include build instructions from all subdirs
464 # For the rationale behind the build phases, see
465 # http://hackage.haskell.org/trac/ghc/wiki/Building/Architecture/Idiom/PhaseOrdering
467 # Setting foo_dist_DISABLE=YES means "in directory foo, for build
468 # "dist", just read the package-data.mk file, do not build anything".
470 # We carefully engineer things so that we can build the
471 # package-data.mk files early on: they depend only on a few tools also
472 # built early. Having got the package-data.mk files built, we can
473 # restart make with up-to-date information about all the packages
474 # (this is phase 0). The remaining problem is the .depend files:
476 # - .depend files in libraries need the stage 1 compiler to build
477 # - ghc/stage1/.depend needs compiler/stage1 built
478 # - compiler/stage1/.depend needs the bootstrap libs built
480 # GHC 6.11+ can build a .depend file without having built the
481 # dependencies of the package, but we can't rely on the bootstrapping
482 # compiler being able to do this, which is why we have to separate the
483 # three phases above.
485 # So this is the final ordering:
487 # Phase 0 : all package-data.mk files
488 # (requires ghc-cabal, ghc-pkg, mkdirhier, dummy-ghc etc.)
489 # Phase 1 : .depend files for bootstrap libs
491 # Phase 2 : compiler/stage1/.depend
492 # (requires bootstrap libs and genprimopcode)
493 # Phase 3 : ghc/stage1/.depend
494 # (requires compiler/stage1)
496 # The rest : libraries/*/dist-install, compiler/stage2, ghc/stage2
500 ifneq "$(BINDIST)" "YES"
509 libraries/Cabal/doc \
513 ifneq "$(GhcUnregisterised)" "YES"
519 ifneq "$(BINDIST)" "YES"
533 ifneq "$(BINDIST)" "YES"
544 ifneq "$(CLEANING)" "YES"
546 $(patsubst %, libraries/%, $(PACKAGES))
549 ifneq "$(BootingFromHc)" "YES"
554 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
555 BUILD_DIRS += libraries/integer-gmp/gmp
567 ifeq "$(Windows)" "YES"
572 BUILD_DIRS += utils/count_lines
573 BUILD_DIRS += utils/compare_sizes
575 ifneq "$(CLEANING)" "YES"
576 # After compiler/, because these packages depend on it
578 $(patsubst %, libraries/%, $(PACKAGES_STAGE2))
581 # XXX libraries/% must come before any programs built with stage1, see
582 # Note [lib-depends].
585 $(foreach lib,$(BOOT_PKGS),$(eval \
586 libraries/$(lib)_dist-boot_DISABLE = YES))
589 ifneq "$(findstring $(phase),0 1)" ""
590 # We can build deps for compiler/stage1 in phase 2
591 compiler_stage1_DISABLE = YES
594 ifneq "$(findstring $(phase),0 1 2)" ""
595 ghc_stage1_DISABLE = YES
598 ifneq "$(findstring $(phase),0 1 2 3)" ""
599 # In phases 0-3, we disable stage2-3, the full libraries and haddock
600 utils/haddock_dist_DISABLE = YES
601 utils/runghc_dist_DISABLE = YES
602 utils/ghctags_dist_DISABLE = YES
603 utils/hpc_dist_DISABLE = YES
604 utils/hsc2hs_dist-install_DISABLE = YES
605 utils/ghc-pkg_dist-install_DISABLE = YES
606 utils/compare_sizes_dist_DISABLE = YES
607 compiler_stage2_DISABLE = YES
608 compiler_stage3_DISABLE = YES
609 ghc_stage2_DISABLE = YES
610 ghc_stage3_DISABLE = YES
611 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),$(eval \
612 libraries/$(lib)_dist-install_DISABLE = YES))
615 ifneq "$(CLEANING)" "YES"
616 ifeq "$(INTEGER_LIBRARY)" "integer-gmp"
617 libraries/base_dist-install_CONFIGURE_OPTS += --flags=-integer-simple
619 ifeq "$(INTEGER_LIBRARY)" "integer-simple"
620 libraries/base_dist-install_CONFIGURE_OPTS += --flags=integer-simple
622 $(error Unknown integer library: $(INTEGER_LIBRARY))
627 # These packages don't pass the Cabal checks because hs-source-dirs
628 # points outside the source directory. This isn't a real problem in
629 # these cases, so we just skip checking them.
630 CHECKED_libraries/dph/dph-seq = YES
631 CHECKED_libraries/dph/dph-par = YES
632 # In compiler's case, include-dirs points outside of the source tree
633 CHECKED_compiler = YES
635 include $(patsubst %, %/ghc.mk, $(BUILD_DIRS))
637 # We need -fno-warn-deprecated-flags to avoid failure with -Werror
638 GhcLibHcOpts += -fno-warn-deprecated-flags
639 GhcBootLibHcOpts += -fno-warn-deprecated-flags
641 # ----------------------------------------------
642 # Per-package compiler flags
644 # If you want to add per-package compiler flags, this
645 # is the place to do it. Do it like this for package <pkg>
647 # libraries/<pkg>_dist-boot_HC_OPTS += -Wwarn
648 # libraries/<pkg>_dist-install_HC_OPTS += -Wwarn
651 # Add $(GhcLibHcOpts) to all library builds
652 $(foreach pkg,$(PACKAGES) $(PACKAGES_STAGE2),$(eval libraries/$(pkg)_dist-install_HC_OPTS += $$(GhcLibHcOpts)))
654 # ----------------------------------------------
655 # A useful pseudo-target
657 stage1_libs : $(ALL_STAGE1_LIBS)
659 ifeq "$(HADDOCK_DOCS)" "YES"
660 libraries/index.html: $(ALL_HADDOCK_FILES)
661 cd libraries && sh gen_contents_index --inplace
662 $(eval $(call all-target,library_doc_index,libraries/index.html))
663 INSTALL_LIBRARY_DOCS += libraries/*.html libraries/*.gif libraries/*.css libraries/*.js
664 CLEAN_FILES += libraries/doc-index* libraries/haddock*.css \
665 libraries/haddock*.js libraries/index*.html libraries/*.gif
668 ifeq "$(CHECK_PACKAGES)" "YES"
672 # -----------------------------------------------------------------------------
673 # Bootstrapping libraries
675 # We need to build a few libraries with the installed GHC, since GHC itself
676 # and some of the tools depend on them:
678 ifneq "$(BINDIST)" "YES"
680 ifneq "$(BOOTSTRAPPING_CONF)" ""
681 ifeq "$(wildcard $(BOOTSTRAPPING_CONF))" ""
682 $(shell echo "[]" >$(BOOTSTRAPPING_CONF))
686 $(eval $(call clean-target,$(BOOTSTRAPPING_CONF),,$(BOOTSTRAPPING_CONF)))
688 # These three libraries do not depend on each other, so we can build
691 $(eval $(call build-package,libraries/hpc,dist-boot,0))
692 $(eval $(call build-package,libraries/extensible-exceptions,dist-boot,0))
693 $(eval $(call build-package,libraries/Cabal,dist-boot,0))
694 $(eval $(call build-package,libraries/binary,dist-boot,0))
695 $(eval $(call build-package,libraries/bin-package-db,dist-boot,0))
697 # register the boot packages in strict sequence, because running
698 # multiple ghc-pkgs in parallel doesn't work (registrations may get
701 $(foreach pkg,$(BOOT_PKGS),$(eval $(call fixed_pkg_dep,$(pkg),dist-boot)))
703 compiler/stage1/package-data.mk : \
704 libraries/Cabal/dist-boot/package-data.mk \
705 libraries/hpc/dist-boot/package-data.mk \
706 libraries/extensible-exceptions/dist-boot/package-data.mk \
707 libraries/bin-package-db/dist-boot/package-data.mk
709 # These are necessary because the bootstrapping compiler may not know
710 # about cross-package dependencies:
711 $(compiler_stage1_depfile_haskell) : $(BOOT_LIBS)
712 $(ghc_stage1_depfile_haskell) : $(compiler_stage1_v_LIB)
714 # A few careful dependencies between bootstrapping packages. When we
715 # can rely on the stage 0 compiler being able to generate
716 # cross-package dependencies with -M (fixed in GHC 6.12.1) we can drop
717 # these, and also some of the phases.
719 # If you miss any out here, then 'make -j8' will probably tell you.
721 libraries/bin-package-db/dist-boot/build/Distribution/InstalledPackageInfo/Binary.$(v_osuf) : libraries/binary/dist-boot/build/Data/Binary.$(v_hisuf) libraries/Cabal/dist-boot/build/Distribution/InstalledPackageInfo.$(v_hisuf)
723 $(foreach pkg,$(BOOT_PKGS),$(eval libraries/$(pkg)_dist-boot_HC_OPTS += $$(GhcBootLibHcOpts)))
725 # Make sure we have all the GHCi libs by the time we've built
726 # ghc-stage2. DPH includes a bit of Template Haskell which needs the
727 # GHCI libs, and we don't have a better way to express that dependency.
729 GHCI_LIBS = $(foreach lib,$(PACKAGES),$(libraries/$(lib)_dist-install_GHCI_LIB)) \
730 $(compiler_stage2_GHCI_LIB)
732 ghc/stage2/build/tmp/$(ghc_stage2_PROG) : $(GHCI_LIBS)
736 # -----------------------------------------------------------------------------
737 # Creating a local mingw copy on Windows
739 ifeq "$(Windows)" "YES"
741 install : install_mingw
742 .PHONY: install_mingw
743 install_mingw : $(INPLACE_MINGW)
744 "$(CP)" -Rp $(INPLACE_MINGW) $(prefix)
746 install : install_perl
748 install_perl : $(INPLACE_PERL)
749 "$(CP)" -Rp $(INPLACE_PERL) $(prefix)
753 ifneq "$(BINDIST)" "YES"
754 $(ghc-prim-$(libraries/ghc-prim_dist-install_VERSION)_HADDOCK_FILE): \
755 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs \
756 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs
759 libraries/ghc-prim/dist-install/build/autogen/GHC/Prim.hs: \
760 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
762 "$(GENPRIMOP_INPLACE)" --make-haskell-source < $< > $@
764 libraries/ghc-prim/dist-install/build/autogen/GHC/PrimopWrappers.hs: \
765 $(PRIMOPS_TXT) $(GENPRIMOP_INPLACE) \
767 "$(GENPRIMOP_INPLACE)" --make-haskell-wrappers < $< > $@
775 # -----------------------------------------------------------------------------
778 install: install_packages install_libs install_libexecs install_headers \
779 install_libexec_scripts install_bins install_docs \
782 install_bins: $(INSTALL_BINS)
783 $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
784 for i in $(INSTALL_BINS); do \
785 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(bindir)" ; \
788 install_libs: $(INSTALL_LIBS)
789 $(INSTALL_DIR) "$(DESTDIR)$(ghclibdir)"
790 for i in $(INSTALL_LIBS); do \
793 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
794 $(RANLIB) $(DESTDIR)$(ghclibdir)/`basename $$i` ;; \
796 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
798 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)" ;; \
800 $(INSTALL_SHLIB) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)";; \
802 $(INSTALL_DATA) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibdir)"; \
806 install_libexec_scripts: $(INSTALL_LIBEXEC_SCRIPTS)
807 ifeq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
810 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
811 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
812 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
816 install_libexecs: $(INSTALL_LIBEXECS)
817 ifeq "$(INSTALL_LIBEXECS)" ""
820 $(INSTALL_DIR) "$(DESTDIR)$(ghclibexecdir)"
821 for i in $(INSTALL_LIBEXECS); do \
822 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(ghclibexecdir)"; \
824 # We rename ghc-stage2, so that the right program name is used in error
826 "$(MV)" "$(DESTDIR)$(ghclibexecdir)/ghc-stage2" "$(DESTDIR)$(ghclibexecdir)/ghc"
829 install_topdirs: $(INSTALL_TOPDIRS)
830 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
831 for i in $(INSTALL_TOPDIRS); do \
832 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i "$(DESTDIR)$(topdir)"; \
835 install_headers: $(INSTALL_HEADERS)
836 $(INSTALL_DIR) "$(DESTDIR)$(ghcheaderdir)"
837 for i in $(INSTALL_HEADERS); do \
838 $(INSTALL_HEADER) $(INSTALL_OPTS) $$i "$(DESTDIR)$(ghcheaderdir)"; \
841 install_docs: $(INSTALL_DOCS)
842 $(INSTALL_DIR) "$(DESTDIR)$(docdir)"
843 ifneq "$(INSTALL_DOCS)" ""
844 for i in $(INSTALL_DOCS); do \
845 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)"; \
848 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html"
849 $(INSTALL_DOC) $(INSTALL_OPTS) docs/index.html "$(DESTDIR)$(docdir)/html"
850 ifneq "$(INSTALL_LIBRARY_DOCS)" ""
851 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/libraries"
852 for i in $(INSTALL_LIBRARY_DOCS); do \
853 $(INSTALL_DOC) $(INSTALL_OPTS) $$i "$(DESTDIR)$(docdir)/html/libraries/"; \
855 $(INSTALL_DATA) $(INSTALL_OPTS) libraries/prologue.txt "$(DESTDIR)$(docdir)/html/libraries/"
856 $(INSTALL_SCRIPT) $(INSTALL_OPTS) libraries/gen_contents_index "$(DESTDIR)$(docdir)/html/libraries/"
858 ifneq "$(INSTALL_HTML_DOC_DIRS)" ""
859 for i in $(INSTALL_HTML_DOC_DIRS); do \
860 $(INSTALL_DIR) $(INSTALL_OPTS) "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
861 $(INSTALL_DOC) $(INSTALL_OPTS) $$i/* "$(DESTDIR)$(docdir)/html/`basename $$i`"; \
865 INSTALLED_PACKAGE_CONF=$(DESTDIR)$(topdir)/package.conf.d
867 # Install packages in the right order, so that ghc-pkg doesn't complain.
868 # Also, install ghc-pkg first.
869 ifeq "$(Windows)" "NO"
870 INSTALLED_GHC_REAL=$(DESTDIR)$(ghclibexecdir)/ghc
871 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(ghclibexecdir)/ghc-pkg
873 INSTALLED_GHC_REAL=$(DESTDIR)$(bindir)/ghc.exe
874 INSTALLED_GHC_PKG_REAL=$(DESTDIR)$(bindir)/ghc-pkg.exe
877 INSTALLED_PACKAGES := $(filter-out haskeline mtl terminfo utf8-string xhtml,$(PACKAGES))
878 ifeq "$(InstallExtraPackages)" "NO"
879 INSTALLED_PACKAGES := $(filter-out $(EXTRA_PACKAGES), $(INSTALLED_PACKAGES))
882 HIDDEN_PACKAGES = binary
884 define set_INSTALL_DISTDIR
885 # $1 = libraries/base, $2 = dist-install
887 # INSTALL_DISTDIR_libraries/base = dist-install
888 INSTALL_DISTDIR_$1 = $2
891 $(eval $(foreach p,$(INSTALLED_PACKAGES) $(PACKAGES_STAGE2),\
892 $(call set_INSTALL_DISTDIR,libraries/$p,dist-install)))
893 INSTALL_DISTDIR_compiler = stage2
895 ALL_INSTALLED_PACKAGES = $(addprefix libraries/,$(INSTALLED_PACKAGES)) \
897 $(addprefix libraries/,$(PACKAGES_STAGE2))
899 install_packages: install_libexecs
900 install_packages: libffi/package.conf.install rts/package.conf.install
901 $(INSTALL_DIR) "$(DESTDIR)$(topdir)"
902 "$(RM)" $(RM_OPTS_REC) "$(INSTALLED_PACKAGE_CONF)"
903 $(INSTALL_DIR) "$(INSTALLED_PACKAGE_CONF)"
904 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update libffi/package.conf.install
905 "$(INSTALLED_GHC_PKG_REAL)" --force --global-conf "$(INSTALLED_PACKAGE_CONF)" update rts/package.conf.install
906 $(foreach p, $(ALL_INSTALLED_PACKAGES),\
907 "$(GHC_CABAL_INPLACE)" install \
908 "$(INSTALLED_GHC_REAL)" \
909 "$(INSTALLED_GHC_PKG_REAL)" \
911 "$(DESTDIR)$(topdir)" \
912 $p $(INSTALL_DISTDIR_$p) \
913 '$(DESTDIR)' '$(prefix)' '$(ghclibdir)' '$(docdir)/html/libraries' \
914 $(RelocatableBuild) &&) true
915 $(foreach p, $(HIDDEN_PACKAGES),\
916 "$(INSTALLED_GHC_PKG_REAL)" --global-conf "$(INSTALLED_PACKAGE_CONF)" \
919 # -----------------------------------------------------------------------------
920 # Binary distributions
922 ifneq "$(CLEANING)" "YES"
923 # This rule seems to hold some files open on Windows which prevents
924 # cleaning, perhaps due to the $(wildcard).
926 $(eval $(call bindist,.,\
930 configure config.sub config.guess install-sh \
934 $(INPLACE_BIN)/mkdirhier \
935 $(INPLACE_BIN)/ghc-cabal \
936 utils/ghc-pwd/ghc-pwd \
937 $(BINDIST_WRAPPERS) \
938 $(BINDIST_PERL_SOURCES) \
942 $(includes_H_CONFIG) \
943 $(includes_H_PLATFORM) \
944 $(includes_H_FILES) \
945 includes/ghcconfig.h \
946 includes/rts/Config.h \
948 $(INSTALL_LIBEXECS) \
949 $(INSTALL_LIBEXEC_SCRIPTS) \
952 $(INSTALL_MANPAGES) \
954 $(INSTALL_LIBRARY_DOCS) \
955 $(addsuffix /*,$(INSTALL_HTML_DOC_DIRS)) \
957 compiler/stage2/doc \
958 $(wildcard libraries/*/dist-install/doc/) \
959 $(wildcard libraries/*/*/dist-install/doc/) \
960 $(filter-out extra-gcc-opts,$(INSTALL_LIBS)) \
961 $(filter-out %/project.mk mk/config.mk %/mk/install.mk,$(MAKEFILE_LIST)) \
965 libraries/gen_contents_index \
966 libraries/prologue.txt \
967 libraries/dph/LICENSE \
970 # mk/project.mk gets an absolute path, so we manually include it in
971 # the bindist with a relative path
973 BIN_DIST_MK = $(BIN_DIST_PREP_DIR)/bindist.mk
975 unix-binary-dist-prep:
976 "$(RM)" $(RM_OPTS_REC) bindistprep/
977 "$(MKDIRHIER)" $(BIN_DIST_PREP_DIR)
978 set -e; for i in LICENSE compiler ghc rts libraries utils docs libffi includes driver mk rules Makefile aclocal.m4 config.sub config.guess install-sh extra-gcc-opts.in ghc.mk inplace distrib/configure.ac distrib/README distrib/INSTALL; do ln -s ../../$$i $(BIN_DIST_PREP_DIR)/; done
979 echo "HADDOCK_DOCS = $(HADDOCK_DOCS)" >> $(BIN_DIST_MK)
980 echo "LATEX_DOCS = $(LATEX_DOCS)" >> $(BIN_DIST_MK)
981 echo "BUILD_DOCBOOK_HTML = $(BUILD_DOCBOOK_HTML)" >> $(BIN_DIST_MK)
982 echo "BUILD_DOCBOOK_PS = $(BUILD_DOCBOOK_PS)" >> $(BIN_DIST_MK)
983 echo "BUILD_DOCBOOK_PDF = $(BUILD_DOCBOOK_PDF)" >> $(BIN_DIST_MK)
984 echo "BUILD_MAN = $(BUILD_MAN)" >> $(BIN_DIST_MK)
985 cd $(BIN_DIST_PREP_DIR) && autoreconf
986 "$(RM)" $(RM_OPTS) $(BIN_DIST_PREP_TAR)
987 # h means "follow symlinks", e.g. if aclocal.m4 is a symlink to a source
988 # tree then we want to include the real file, not a symlink to it
989 cd bindistprep && "$(TAR_CMD)" hcf - -T ../$(BIN_DIST_LIST) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
991 windows-binary-dist-prep:
992 "$(RM)" $(RM_OPTS_REC) bindistprep/
993 $(MAKE) prefix=$(TOP)/$(BIN_DIST_PREP_DIR) install
994 cd bindistprep && "$(TAR_CMD)" cf - $(BIN_DIST_NAME) | bzip2 -c > ../$(BIN_DIST_PREP_TAR_BZ2)
997 ifeq "$(ISCC_CMD)" ""
998 @echo No ISCC_CMD, so not making installer
1000 "$(ISCC_CMD)" /O. /Fbindistprep/$(WINDOWS_INSTALLER_BASE) - < distrib/ghc.iss
1003 # tryTimes tries to run its third argument multiple times, until it
1004 # succeeds. Don't call it directly; call try10Times instead.
1005 # The first and second argument to tryTimes are lists of values.
1006 # The length of the first argument is the number of times we have
1007 # already tried. The length of the second argument is the number more
1008 # times we will try.
1009 tryTimes = $(if $2, \
1010 { echo 'Try $(words x $1): $3' ; $3 ; } || \
1011 $(call tryTimes,x $1,$(wordlist 2,$(words $2),$2),$3), \
1014 # Try to run the argument 10 times. If all 10 fail, fail.
1015 try10Times = $(call tryTimes,,x x x x x x x x x x,$1) { echo Failed; false; }
1017 .PHONY: publish-binary-dist
1018 publish-binary-dist:
1019 $(call try10Times,$(PublishCp) $(BIN_DIST_TAR_BZ2) $(PublishLocation)/dist)
1020 ifeq "$(mingw32_TARGET_OS)" "1"
1021 $(call try10Times,$(PublishCp) $(WINDOWS_INSTALLER) $(PublishLocation)/dist)
1024 .PHONY: publish-docs
1026 $(call try10Times,$(PublishCp) -r bindisttest/installed/share/doc/ghc/* $(PublishLocation)/docs)
1028 # -----------------------------------------------------------------------------
1029 # Source distributions
1037 # A source dist is built from a complete build tree, because we
1038 # require some extra files not contained in a darcs checkout: the
1039 # output from Happy and Alex, for example.
1041 # The steps performed by 'make dist' are as follows:
1042 # - create a complete link-tree of the current build tree in /tmp
1043 # - run 'make distclean' on that tree
1044 # - remove a bunch of other files that we know shouldn't be in the dist
1045 # - tar up first the extralibs package, then the main source package
1048 # Directory in which we're going to build the src dist
1050 SRC_DIST_NAME=ghc-$(ProjectVersion)
1051 SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
1054 # Files to include in source distributions
1056 SRC_DIST_DIRS = mk rules docs distrib bindisttest libffi includes utils docs rts compiler ghc driver libraries ghc-tarballs
1058 configure.ac config.guess config.sub configure \
1059 aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
1060 ghc.spec.in ghc.spec extra-gcc-opts.in VERSION \
1061 boot boot-pkgs packages ghc.mk
1063 SRC_DIST_TARBALL = $(SRC_DIST_NAME)-src.tar.bz2
1066 echo $(ProjectVersion) >VERSION
1071 # $(call sdist_file,compiler,stage2,cmm,Foo/Bar,CmmLex,x)
1072 # to copy the generated file that replaces compiler/cmm/Foo/Bar/CmmLex.x, where
1073 # "stage2" is the dist dir.
1075 "$(CP)" $1/$2/build/$4/$5.hs $(SRC_DIST_DIR)/$1/$3/$4
1076 mv $(SRC_DIST_DIR)/$1/$3/$4/$5.$6 $(SRC_DIST_DIR)/$1/$3/$4/$5.$6.source
1081 "$(RM)" $(RM_OPTS_REC) $(SRC_DIST_DIR)
1082 "$(RM)" $(RM_OPTS) $(SRC_DIST_TARBALL)
1083 mkdir $(SRC_DIST_DIR)
1084 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_DIRS); do mkdir $$i; ( cd $$i && lndir $(TOP)/$$i ); done
1085 cd $(SRC_DIST_DIR) && for i in $(SRC_DIST_FILES); do $(LN_S) $(TOP)/$$i .; done
1086 cd $(SRC_DIST_DIR) && $(MAKE) distclean
1087 rm -rf $(SRC_DIST_DIR)/libraries/tarballs/
1088 rm -rf $(SRC_DIST_DIR)/libraries/stamp/
1089 $(call sdist_file,compiler,stage2,cmm,,CmmLex,x)
1090 $(call sdist_file,compiler,stage2,cmm,,CmmParse,y)
1091 $(call sdist_file,compiler,stage2,parser,,Lexer,x)
1092 $(call sdist_file,compiler,stage2,parser,,Parser,y.pp)
1093 $(call sdist_file,compiler,stage2,parser,,ParserCore,y)
1094 $(call sdist_file,utils/hpc,dist,,,HpcParser,y)
1095 $(call sdist_file,utils/genprimopcode,dist,,,Lexer,x)
1096 $(call sdist_file,utils/genprimopcode,dist,,,Parser,y)
1097 $(call sdist_file,utils/haddock,dist,src,Haddock,Lex,x)
1098 $(call sdist_file,utils/haddock,dist,src,Haddock,Parse,y)
1099 cd $(SRC_DIST_DIR) && "$(RM)" $(RM_OPTS_REC) compiler/stage[123] mk/build.mk
1100 cd $(SRC_DIST_DIR) && "$(FIND)" $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" -o -name "*-darcs-backup*" \) -print | "$(XARGS)" $(XARGS_OPTS) "$(RM)" $(RM_OPTS_REC)
1104 "$(TAR_CMD)" chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(TOP)/$(SRC_DIST_TARBALL)
1106 sdist-manifest : $(SRC_DIST_TARBALL)
1107 tar tjf $(SRC_DIST_TARBALL) | sed "s|^ghc-$(ProjectVersion)/||" | sort >sdist-manifest
1109 # Upload the distribution(s)
1110 # Retrying is to work around buggy firewalls that corrupt large file transfers
1112 ifneq "$(PublishLocation)" ""
1114 $(call try10Times,$(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist)
1117 ifeq "$(BootingFromHc)" "YES"
1118 # In a normal build we use GHC to compile C files (see
1119 # rules/c-suffix-rules.mk), which passes a number of its own options
1120 # to the C compiler. So when bootstrapping we have to provide these
1121 # flags explicitly to C compilations.
1122 SRC_CC_OPTS += -DNO_REGS -DUSE_MINIINTERPRETER
1123 SRC_CC_OPTS += -D__GLASGOW_HASKELL__=$(ProjectVersionInt)
1124 SRC_CC_OPTS += -I$(GHC_INCLUDE_DIR)
1127 # -----------------------------------------------------------------------------
1128 # sdisting libraries
1130 # Use manually, with e.g.:
1131 # make sdist_directory
1134 inplace/bin/ghc-cabal sdist libraries/$* dist-install
1136 # -----------------------------------------------------------------------------
1141 CLEAN_FILES += utils/ghc-pwd/ghc-pwd
1142 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.exe
1143 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.hi
1144 CLEAN_FILES += utils/ghc-pwd/ghc-pwd.o
1145 CLEAN_FILES += libraries/bootstrapping.conf
1146 CLEAN_FILES += libraries/integer-gmp/cbits/GmpDerivedConstants.h
1147 CLEAN_FILES += libraries/integer-gmp/cbits/mkGmpDerivedConstants
1149 clean : clean_files clean_libraries
1153 "$(RM)" $(RM_OPTS) $(CLEAN_FILES)
1155 ifneq "$(NO_CLEAN_GMP)" "YES"
1156 CLEAN_FILES += libraries/integer-gmp/gmp/gmp.h
1157 CLEAN_FILES += libraries/integer-gmp/gmp/libgmp.a
1162 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/objs
1163 "$(RM)" $(RM_OPTS_REC) libraries/integer-gmp/gmp/gmpbuild
1166 .PHONY: clean_libraries
1167 clean_libraries: $(patsubst %,clean_libraries/%_dist-install,$(PACKAGES) $(PACKAGES_STAGE2))
1168 clean_libraries: $(patsubst %,clean_libraries/%_dist-boot,$(BOOT_PKGS))
1171 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/dist, $(PACKAGES) $(PACKAGES_STAGE2))
1172 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/*.buildinfo, $(PACKAGES) $(PACKAGES_STAGE2))
1174 # We have to define a clean target for each library manually, because the
1175 # libraries/*/ghc.mk files are not included when we're cleaning.
1176 ifeq "$(CLEANING)" "YES"
1177 $(foreach lib,$(PACKAGES) $(PACKAGES_STAGE2),\
1178 $(eval $(call clean-target,libraries/$(lib),dist-install,libraries/$(lib)/dist-install)))
1181 clean : clean_bindistprep
1182 .PHONY: clean_bindistprep
1184 "$(RM)" $(RM_OPTS_REC) bindistprep/
1187 "$(RM)" $(RM_OPTS) config.cache config.status config.log mk/config.h mk/stamp-h
1188 "$(RM)" $(RM_OPTS) mk/config.mk mk/are-validating.mk mk/project.mk
1189 "$(RM)" $(RM_OPTS) mk/config.mk.old mk/project.mk.old
1190 "$(RM)" $(RM_OPTS) extra-gcc-opts docs/users_guide/ug-book.xml
1191 "$(RM)" $(RM_OPTS) compiler/ghc.cabal compiler/ghc.cabal.old
1192 "$(RM)" $(RM_OPTS) ghc/ghc-bin.cabal
1193 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h
1194 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h
1195 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h
1196 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h
1197 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h
1199 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.log, $(PACKAGES) $(PACKAGES_STAGE2))
1200 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/config.status, $(PACKAGES) $(PACKAGES_STAGE2))
1201 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/include/Hs*Config.h, $(PACKAGES) $(PACKAGES_STAGE2))
1202 "$(RM)" $(RM_OPTS_REC) $(patsubst %, libraries/%/autom4te.cache, $(PACKAGES) $(PACKAGES_STAGE2))
1204 maintainer-clean : distclean
1205 "$(RM)" $(RM_OPTS) configure mk/config.h.in
1206 "$(RM)" $(RM_OPTS_REC) autom4te.cache libraries/*/autom4te.cache
1207 "$(RM)" $(RM_OPTS) ghc.spec
1208 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/GNUmakefile, \
1209 $(PACKAGES) $(PACKAGES_STAGE2))
1210 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/ghc.mk, $(PACKAGES) $(PACKAGES_STAGE2))
1211 "$(RM)" $(RM_OPTS) $(patsubst %, libraries/%/configure, \
1212 $(PACKAGES) $(PACKAGES_STAGE2))
1213 "$(RM)" $(RM_OPTS) libraries/base/include/HsBaseConfig.h.in
1214 "$(RM)" $(RM_OPTS) libraries/directory/include/HsDirectoryConfig.h.in
1215 "$(RM)" $(RM_OPTS) libraries/process/include/HsProcessConfig.h.in
1216 "$(RM)" $(RM_OPTS) libraries/unix/include/HsUnixConfig.h.in
1217 "$(RM)" $(RM_OPTS) libraries/old-time/include/HsTimeConfig.h.in
1219 .PHONY: all_libraries
1221 .PHONY: bootstrapping-files
1222 bootstrapping-files: $(OTHER_LIBS)
1223 bootstrapping-files: includes/ghcautoconf.h
1224 bootstrapping-files: includes/DerivedConstants.h
1225 bootstrapping-files: includes/GHCConstants.h