4 #################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 #################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 #################################################################################
43 # Project-wide platform variables
45 #################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what. (cygwin32 only).
92 #################################################################################
96 # Set of options applicable to all fptools projects
98 #################################################################################
101 # What parts to build: An fptools build tree does not have to be built
102 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
103 # control which projects are built.
105 # Caution: the projects are built in the order given here, so if some
106 # projects use others you must list them in the correct order.
108 # Generally: * glafp-utils should be first
112 # then it's up to you
114 ProjectsToBuild = glafp-utils literate ghc hslibs
116 # Make a distinction between building and installing, ProjectsToInstall
117 # does not include the literate bits..
119 ProjectsToInstall = glafp-utils ghc hslibs
122 # Should the various project tests directories be built?
124 IncludeTestDirsInBuild=NO
127 # Name variables for the main project
130 ProjectName = $($(Project)ProjectName)
131 ProjectNameShort = $($(Project)ProjectNameShort)
132 ProjectVersion = $($(Project)ProjectVersion)
133 ProjectPatchLevel = $($(Project)ProjectPatchLevel)
135 #################################################################################
139 # Set of (configurable) options needed by the ghc tree
140 # plus their default options (if any).
142 #################################################################################
145 # Name variables for ghc:
147 GhcProjectName = The Glorious Glasgow Haskell Compilation System
148 GhcProjectNameShort = ghc
149 GhcProjectVersion = 3.00
150 GhcProjectPatchLevel = 0
152 #---------------------------------------------------------------
154 # Variables that control how the compiler itself is built
156 # Specify the Haskell compiler to be used to compile the compiler itself
158 # WithGhcHc Path name of the compiler to use
160 # WithGhcHcType What "type" of compiler is being used
170 # WithGhcHcType=HC_GLASGOW_GHC
172 # Extra ways in which to build the compiler (for example, you might want to
173 # build a profiled compiler so you can see where it spends its time)
176 # Extra option flags to pass to the compiler that compiles the compiler
177 # (Ones that are essential are wired into ghc/compiler/Makefile)
179 # -H25m allocate a bigger heap (default is 6m)
181 # -O compile an optimised compiler
182 # NB! If you add -O you'll almost certainly need to increase
183 # the amount of heap space too (to 15m or more)
185 # -DDEBUG include consistency/assertion checks in the compiled compiler
187 # -dcore-lint check the types after every pass of the compiler;
188 # a pretty strong internal check
191 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
192 GhcWithHscBuiltViaC=NO
194 # Build hsc with -O and turn optimising flag on when compiling
195 # the intermediate C file
196 GhcUseGccForOptAsm=YES
198 # Compile intermediate C file with debugging options set.
199 GhcUseGccForDebuggingAsm=YES
201 # Build a registerised version of hsc and runtime
202 # (you'd be desperate or silly not to).
203 GhcWithRegisterised=YES
205 # Build a compiler with a native code generator backend
206 # (as well as a C backend)
208 # Target platforms supported:
209 # i386, alpha & sparc
210 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
213 # Building various ways?
214 # (right now, empty if not).
215 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
216 BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
217 BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
218 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
219 BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
221 #---------------------------------------------------------------
223 # Variables that control how the prelude libraries and runtime system are built
225 # What extra ways to build the libraries in
226 # In addition to the normal sequential way, the default is to also build
227 # profiled prelude libraries.
230 # Option flags to pass to GHC when it's compiling prelude modules
231 # Typically these are things like -O or -dcore-lint
232 # The ones that are *essential* are wired into ghc/lib/Makefile
234 # -O is pretty desirable, otherwise no inlining of prelude
235 # things (incl "+") happens when compiling with this compiler
238 # Splitting profiled code produces awfully large archives under ELF, so
239 # we turn it off here.
241 # ToDo: track down the source of this.
243 ifeq "$(strip $(way))" "p"
246 ifeq "$(strip $(way))" "mr"
249 GhcLibHcOpts= -O -split-objs -odir $*
253 # what to include in a binary distribution
256 GhcBinDistDirs = ghc hslibs
257 GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
258 GhcBinDistPrlScripts = ghc stat2resid hstags mkdependHS
259 GhcBinDistLibPrlScripts = hscpp
260 GhcBinDistBins = hp2ps
262 #################################################################################
266 # Set of (configurable) options needed by the Haskell libraries (hslibs)
267 # plus their default options (if any).
269 #################################################################################
271 # Build the Haskell Readline bindings?
273 HsLibsWithReadline=NO
275 # Include path to readline.h
276 # (no path == in standard include path)
280 # Build the socket libraries?
282 HsLibsWithSockets=YES
285 # The different ways to build hslibs. Default is just to mirror
286 # what is done for the ghc prelude libraries.
288 HsLibWays=$(GhcLibWays)
290 # Option flags for hslibs are by default the same as for the options
291 # used for the prelude libs (see above).
292 HsLibHcOpts=$(GhcLibHcOpts)
294 #################################################################################
298 # Happy specific options
300 #################################################################################
303 # Name variables for happy:
305 HappyProjectName = Happy
306 HappyProjectNameShort = happy
307 HappyProjectVersion = 1.5
308 HappyProjectPatchLevel = 0
310 # The compiler you'd like to use to compile Happy
311 WithHappyHc = $(WithGhcHc)
313 # HappyHcOpts gives the flags to pass to the Haskell compiler used
314 # to compile the Happy sources with.
318 # what to include in a binary distribution
321 HappyBinDistDirs = happy
322 HappyBinDistDocs = happy/doc
323 HappyBinDistShScripts = happy
325 #################################################################################
329 # Haggis specific options
331 #################################################################################
333 #################################################################################
337 # Green-card specific options
339 #################################################################################
342 #################################################################################
346 # nofib specific options
348 #################################################################################
351 # NoFibSubDirs controls which set of tests should be run
352 # You can run one or more of
361 NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
363 # The different ways to build nofib. Default is just to mirror
364 # what is done for the ghc prelude libraries.
366 NoFibWays=$(GhcLibWays)
368 # Haskell compiler options for nofib
371 # ==============================================================================
373 # END OF PROJECT-SPECIFIC STUFF
375 # Now come the generic configuration options
377 # ==============================================================================
379 #################################################################################
381 # Paths (see paths.mk)
383 #################################################################################
387 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
389 FPTOOLS_TOP_ABS = @hardtop@
392 # Installation directories, we don't use half of these,
393 # but since the configure script has them on offer while
394 # passing through, we might as well set them.
397 exec_prefix = @exec_prefix@
399 #UNUSED, see below: libexecdir = @libexecdir@
401 #sysconfdir = @datadir@
402 #sharedstatedir = @sharedstatedir@
403 #localstatedir = @localstatedir@
406 includedir = @includedir@
407 oldincludedir = @oldincludedir@
409 #UNUSED:srcdir = @srcdir@
412 # Default values for most of the above are only set if
413 # they weren't configured to anything in particular
414 # via the configure script. (i.e., we make no assumption
415 # that the autoconf-generated script will assign defaults
416 # to all of the above).
418 ifeq "$(strip $(exec_prefix))" ""
419 exec_prefix = $(prefix)
421 ifeq "$(strip $(bindir))" ""
422 bindir = $(exec_prefix)/bin
426 # NOTE: by intention, libexecdir and libdir point to
428 # => Only way to override this is to set libexecdir= on the command line.
429 # (NOTE: configure script setting is ignored).
430 libexecdir = $(libdir)
432 ifeq "$(strip $(datadir))" ""
433 datadir = $(prefix)/share
435 ifeq "$(strip $(libdir))" ""
436 libdir = $(exec_prefix)/lib
438 ifeq "$(strip $(infodir))" ""
439 infodir = $(prefix)/info
441 ifeq "$(strip $(includedir))" ""
442 includedir = $(prefix)/include
444 ifeq "$(strip $(oldincludedir))" ""
445 oldincludedir = /usr/include
447 ifeq "$(strip $(mandir))" ""
448 mandir = $(prefix)/man
452 #################################################################################
454 # Utilities programs: flags
456 #################################################################################
458 # If you want to give any standard flags to pretty much any utility
459 # (see utils.mk for a complete list), by adding a line here
463 # where P is the utility. For example, to add -O to all Haskell
469 #################################################################################
471 # Utilities programs: where to find them
473 #################################################################################
475 #-----------------------------------------------------------------------------
476 # FPtools Utility locations
478 # By default, the various utils needed to be build ghc and chums
479 # is set up to point to the utils/ directory. Define here the
480 # path prefix for the utilities. Notice that it's a prefix with
481 # a trailing slash, so that it can be concatenated directly on
482 # front of a program name; if it's not set then we just look
483 # along the shell's $(PATH)
485 # If instead you want to use installed or your own versions of these,
486 # override the various *_PREFIX in build.mk, i.e., having the following
491 # will force `make' to rummage around in your PATH to find `fastmake' (not
492 # sure it would need it in the first place, but still).
494 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
496 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
497 FASTMAKE_PREFIX = $(GLAFP_UTILS)/fastmake/
498 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
499 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
500 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
501 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
502 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
503 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
504 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
505 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
506 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
509 LITERATE = $(FPTOOLS_TOP)/literate
511 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
512 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
513 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
515 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
516 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
518 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
519 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
520 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
521 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
522 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
523 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
526 #-----------------------------------------------------------------------------
527 # Haskell compiler and mkdependHS
529 HC = $(FPTOOLS_TOP)/ghc/driver/ghc
532 #-----------------------------------------------------------------------------
538 WhatGccIsCalled = gcc
539 ifeq "$(strip $(HaveGcc))" "YES"
540 ifneq "$(strip $(UseGcc))" "YES"
543 CC = $(WhatGccIsCalled)
547 #-----------------------------------------------------------------------------
553 #-----------------------------------------------------------------------------
554 # Other standard (ha!) Unix utilities
557 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
558 BASH = /usr/local/bin/bash
560 # Could be either gzip or compress
562 COMPRESS = @CompressCmd@
563 COMPRESS_SUFFIX = @CompressSuffix@
565 CONTEXT_DIFF = @ContextDiffCmd@
573 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
574 # install-sh script (if chosen). This not terribly useful to us, so we convert
575 # it into an abs. path.
577 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
586 PREPROCESSCMD = $(CC) -E
593 # In emergency situations, REAL_SHELL is used to perform shell commands
594 # from within the ghc driver script, by scribbling the command line to
595 # a temp file and then having $(REAL_SHELL) execute it.
597 # The reason for having to do this is that overly long command lines
598 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
599 # 2.5.1), which is why this backdoor is provided. The situation of overly
600 # long command lines is either encountered while doing `make boot' in ghc/compiler,
601 # or when linking the compiler binary (`hsc').
603 # We do not use SHELL to execute long commands, as `make' will more than likely
604 # override whatever setting you have in your environment while executing.
606 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
607 # as it SHELL that will show up the bogosity in the first place, but setting
608 # it to anything else isn't really portable.
610 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
611 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
620 # Under cygwin32, we have to deal with .exe suffixes
622 EXE_SUFFIX=@ExeSuffix@
625 # This is special to literate/, ToDo: add literate-specific
626 # configure setup to literate/.
631 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
639 #-----------------------------------------------------------------------------
640 # SGML stuff (currently not configured - we assume you have it)
642 SGML2LATEX = sgml2latex
643 SGML2HTML = sgml2html
644 SGML2INFO = sgml2info
647 #-----------------------------------------------------------------------------
648 # FPtools support software
650 # Stuff from fptools/glafp-utils
651 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
652 FASTMAKE = $(FASTMAKE_PREFIX)fastmake
653 LTX = $(LTX_PREFIX)ltx
654 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
655 LNDIR = $(LNDIR_PREFIX)lndir
656 MSUB = $(MSUB_PREFIX)msub
657 ETAGS = $(ETAGS_PREFIX)etags
658 VERBATIM = $(VERBATIM_PREFIX)verbatim
659 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
660 SGML2LATEX = sgml2latex
661 RUNTEST = $(RUNTEST_PREFIX)runstdtest
663 HAPPY_VERSION = @HappyVersion@
665 GREENCARD = @GreencardCmd@
668 # Stuff from fptools/literate
670 INFO = $(UTIL_PREFIX)info
671 MAKEINFO = $(INFO_PREFIX)makeinfo
672 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
673 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
674 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
675 LIT2HTML = $(LITERATE_PREFIX)lit2html
676 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
677 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
678 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
679 LIT2TEXT = $(LITERATE_PREFIX)lit2text
680 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
683 # Stuff from fptools/ghc/utils
685 UNLIT = $(UNLIT_PREFIX)unlit
686 UGEN = $(UGEN_PREFIX)ugen
687 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
688 HP2PS = $(HP2PS_PREFIX)hp2ps
689 HSCPP = $(HSCPP_PREFIX)hscpp
690 HSTAGS = $(HSTAGS_PREFIX)hstags
693 # Options for the compiling different `ways'. Various projects within
694 # the glorious fptools tree support building in various user-configured
695 # ways. For instance, you could set up one `way' such that the prelude
696 # libraries and hslibs all were built with the option -ffoldr-build-on.
698 # To configure up your own way, have a look at some of the standard ways
699 # such as profiling, and create your own set of WAY_*_OPTS defs below.
700 # After having done that, add your way string to WAYS, and after having
701 # run the configure script, the different projects will add the new way
702 # to the list of ways they support.
706 # IMPORTANT! The WAYS variable configures the different `ways'
707 # you want to build a project (or maybe just parts of it, as is
708 # the case for ghc/). This variable is intended set inside the
709 # project mk setup, enforcing a global fptools WAYS is a bit too
710 # much (do you *really* want to build glafp-utils the profiled-concurrent
715 # Definitions of the different ways:
719 # - description, e.g., profiling
720 # * what they mean to the driver:
721 # - WAY_p_HC_OPTS gives the list of command-line options
726 # The ways currently defined.
728 ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
731 # The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
732 # as the driver script treats these guys specially and needs to carefully be told
733 # about the options for these. Hence, we hide the required command line options
734 # for these in the ghc/driver, as this is the only place they are needed.
736 # If you want to add to these default options, fill in the variables below:
742 WAY_t_NAME=ticky-ticky profiling
743 WAY_t_HC_OPTS= -ticky
746 WAY_u_NAME=unregisterized (using portable C only)
749 # Way `mc': concurrent
750 WAY_mc_NAME=concurrent
751 WAY_mc_HC_OPTS=-concurrent
754 WAY_mr_NAME=profiled concurrent
755 WAY_mr_HC_OPTS=-prof -concurrent
758 WAY_mt_NAME=ticky-ticky concurrent
759 WAY_mt_HC_OPTS=-ticky -concurrent
763 WAY_mp_HC_OPTS=-parallel
769 WAY_mg_HC_OPTS=-gransim
772 # Ways for different garbage collectors
774 WAY_2s_NAME=2-space GC
777 WAY_1s_NAME=1-space GC
780 WAY_du_NAME=dual-mode GC
784 # Add user-way configurations here: