4 ################################################################################
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
12 # DO NOT EDIT THIS FILE!
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # This may be triggered automatically by the build system (say
16 # if config.mk.in has changed more recently than config.mk),
17 # so if you edit config.mk your changes will be spammed.
19 # - Settings in this file may be overriden by giving replacement
20 # definitions in build.mk. See build.mk.sample for a good
21 # starting point for a build.mk file.
23 # If you don't have a build.mk file then you get defaults for everything.
24 # The defaults should provide a reasonable vanilla build.
26 # This is one of only two files that configure generates (the other is config.h)
29 ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
30 ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
31 $(error GNU make version 3.79.1 or later is required.)
35 ################################################################################
40 # ProjectVersion is treated as a *string*
41 # ProjectVersionInt is treated as an *integer* (for cpp defines)
43 # Versioning scheme: A.B.C
44 # A: major version, decimal, any number of digits
45 # B: minor version, decimal, any number of digits
46 # C: patchlevel, one digit, omitted if zero.
48 # ProjectVersionInt does *not* contain the patchlevel (rationale: this
49 # figure is used for conditional compilations, and library interfaces
50 # etc. are not supposed to change between patchlevels).
52 # The ProjectVersionInt is included in interface files, and GHC
53 # checks that it's reading interface generated by the same ProjectVersion
54 # as itself. It does this even though interface file syntax may not
55 # change between versions. Rationale: calling conventions or other
56 # random .o-file stuff might change even if the .hi syntax doesn't
58 ProjectName = @ProjectName@
60 ProjectVersion = @ProjectVersion@$(ProjectTags)
61 ProjectVersionInt = @ProjectVersionInt@
62 ProjectPatchLevel = @ProjectPatchLevel@
64 ################################################################################
68 ################################################################################
70 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
71 # specifier. E.g. sparc-sun-solaris2
73 # Build platform: the platform on which we are doing this build
74 # Host platform: the platform on which these binaries will run
75 # Target platform: the platform for which this compiler will generate code
77 # We don't support build & host being different, because the build
78 # process creates binaries that are run during the build, and also
81 # If host & target are different, then we are building a compiler
82 # which will generate intermediate .hc files to port to the target
83 # architecture for bootstrapping. The libraries and stage 2 compiler
84 # will be built as HC files for the target system, and likely won't
85 # build on this host platform.
87 # An important invariant is that for any piece of source code, the
88 # platform on which the code is going to run is the HOST platform,
89 # and the platform on which we are building is the BUILD platform.
90 # Additionally for the compiler, the platform this compiler will
91 # generate code for is the TARGET. TARGET is not meaningful outside
92 # the compiler sources.
94 # Guidelines for when to use HOST vs. TARGET:
96 # - In the build system (Makefile, foo.mk), normally we should test
97 # $(HOSTPLATFORM). There are some cases (eg. installation), where
98 # we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
99 # doesn't matter which is used.
101 # - In the compiler itself, we should test HOST or TARGET depending
102 # on whether the conditional relates to the code being generated, or
103 # the platform on which the compiler is running. See the section
104 # on "Coding Style" in the commentary for more details.
106 # - In all other code, we should be testing HOST only.
108 # NOTE: cross-compiling is not well supported by the build system.
109 # You have to do a lot of work by hand to cross compile: see the
110 # section on "Porting GHC" in the Building Guide.
112 HOSTPLATFORM = @HostPlatform@
113 TARGETPLATFORM = @TargetPlatform@
114 BUILDPLATFORM = @BuildPlatform@
117 # in one or two places, we need to get at the OS version (major and
118 # perhaps even minor), HostOS_Full is the OS name reported by
119 # AC_CANONICAL_SYSTEM.
121 HostPlatform_CPP = @HostPlatform_CPP@
122 HostArch_CPP = @HostArch_CPP@
123 HostOS_CPP = @HostOS_CPP@
124 HostOS_Full = @HostOS_Full@
125 HostVendor_CPP = @HostVendor_CPP@
127 TargetPlatform_CPP = @TargetPlatform_CPP@
128 TargetArch_CPP = @TargetArch_CPP@
129 TargetOS_CPP = @TargetOS_CPP@
130 TargetVendor_CPP = @TargetVendor_CPP@
132 BuildPlatform_CPP = @BuildPlatform_CPP@
133 BuildArch_CPP = @BuildArch_CPP@
134 BuildOS_CPP = @BuildOS_CPP@
135 BuildVendor_CPP = @BuildVendor_CPP@
137 @HostPlatform_CPP@_HOST = 1
138 @TargetPlatform_CPP@_TARGET = 1
139 @BuildPlatform_CPP@_BUILD = 1
141 @HostArch_CPP@_HOST_ARCH = 1
142 @TargetArch_CPP@_TARGET_ARCH = 1
143 @BuildArch_CPP@_BUILD_ARCH = 1
145 @HostOS_CPP@_HOST_OS = 1
146 @TargetOS_CPP@_TARGET_OS = 1
147 @BuildOS_CPP@_BUILD_OS = 1
149 @HostVendor_CPP@_HOST_VENDOR = 1
150 @TargetVendor_CPP@_TARGET_VENDOR = 1
151 @BuildVendor_CPP@_BUILD_VENDOR = 1
153 ################################################################################
155 # Global configuration options
157 ################################################################################
159 # Leading underscores on symbol names in object files
160 # Valid options: YES/NO
162 LeadingUnderscore=@LeadingUnderscore@
164 # Pin a suffix on executables? If so, what (Windows only).
167 # Windows=YES if on a Windows platform
168 ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
174 ifeq "$(Windows)" "YES"
180 # BootingFromHc - build GHC and the libraries from .hc files?
181 BootingFromHc = @BootingFromHc@
183 # BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
184 # rather than registerised code, i.e., disable the mangler?
185 BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
188 # Which ways should DocBook XML documents be built?
189 # options are: dvi ps pdf html chm HxS
193 ################################################################################
195 # Variables that control how the compiler itself is built
197 ################################################################################
199 # The compiler used to build GHC is $(GHC). To change the actual compiler
200 # used, re-configure with --with-ghc=<path-to-ghc>.
202 # Extra ways in which to build the compiler (for example, you might want to
203 # build a profiled compiler so you can see where it spends its time)
206 # Extra option flags to pass to the compiler that compiles the compiler
207 # (Ones that are essential are wired into compiler/Makefile)
208 # Typical options to use here:
210 # -DDEBUG include debugging code and assertions (will make the
211 # compiler slower and produce debugging output, but useful
214 # -dcore-lint check the types after every pass of the compiler;
215 # a pretty strong internal check of the compiler being
216 # used to compile GHC. Useful when bootstrapping.
217 GhcHcOpts=-Rghc-timing
219 # Extra options added to specific stages of the compiler bootstrap.
220 # These are placed later on the command line, and may therefore
221 # override options from $(GhcHcOpts).
226 # Build a compiler that will build *unregisterised* libraries and
227 # binaries by default. Unregisterised code is supposed to compile and
228 # run without any support for architecture-specific assembly mangling,
229 # register assignment or tail-calls, and is therefore a good way to get
230 # started when porting GHC to new architectures.
232 # If this is set to NO, you can still use the unregisterised way
233 # (way 'u') to get unregisterised code, but the default way will be
236 # NOTE: the stage1 compiler will be a registerised binary (assuming
237 # the compiler you build with is generating registerised binaries), but
238 # the stage2 compiler will be an unregisterised binary.
240 ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
241 GhcUnregisterised=YES
246 # Build a compiler with a native code generator backend
247 # (as well as a C backend)
249 # Target platforms supported:
251 # sparc has bitrotted
252 # AIX is not supported
253 ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
254 OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
256 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
257 GhcWithNativeCodeGen=$(strip\
258 $(if $(filter YESYESNO,\
259 $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
261 # Include support for generating Java
264 HaveLibDL = @HaveLibDL@
266 # ArchSupportsSMP should be set iff there is support for that arch in
268 ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
270 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
271 GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
273 # Whether to include GHCi in the compiler. Depends on whether the RTS linker
274 # has support for this OS/ARCH combination.
276 OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
277 ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
279 ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
280 GhcWithInterpreter=YES
282 GhcWithInterpreter=NO
285 # GhcEnableTablesNextToCode tells us whether the target architecture
286 # supports placing info tables directly before the entry code
287 # (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
288 # TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
289 # code or not, which may be decided by options to the compiler later.
290 ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
291 GhcEnableTablesNextToCode=NO
293 GhcEnableTablesNextToCode=YES
297 # Building various ways?
298 # (right now, empty if not).
299 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
300 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
302 # Interface file version (hi-boot files only)
304 # A GHC built with HscIfaceFileVersion=n will look for
305 # M.hi-boot-n, and only then for
307 # (It'll be happy with the latter if the former doesn't exist.)
310 # This variable is used ONLY for hi-boot files. Its only purpose is
311 # to allow you to have a single directory with multiple .hi-boot files
312 # for the same module, each corresponding to a different version of
315 # HscIfaceFileVersion is propagated to hsc via
316 # compiler/main/Config.hs, which is automatically generated by
319 HscIfaceFileVersion=6
321 #------------------------------------------------------------------------------
322 # Options for Libraries
324 # What extra ways to build the libraries in
325 # In addition to the normal sequential way, the default is to also build
326 # profiled prelude libraries.
327 # When booting from .hc files, turn this off.
328 ifeq "$(BootingFromHc)" "YES"
334 # In addition, the RTS is built in some further variations. Ways that
338 # thr_p : threaded profiled
339 # debug : debugging (compile with -g for the C compiler, and -DDEBUG)
340 # debug_p : debugging profiled
341 # debug_u : debugging unregisterised
342 # thr_debug : debugging threaded
343 # thr_debug_p : debugging threaded profiled
344 # t : ticky-ticky profiling
345 # debug_t : debugging ticky-ticky profiling
349 # Usually want the debug version
350 ifeq "$(BootingFromHc)" "NO"
354 # Want the threaded versions unless we're unregisterised
355 # Defer the check until later by using $(if..), because GhcUnregisterised might
356 # be set in build.mk, which hasn't been read yet.
357 GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_p thr_debug,)
359 # Option flags to pass to GHC when it's compiling modules in
360 # fptools/libraries. Typically these are things like -O or
361 # -dcore-lint or -H32m. The ones that are *essential* are wired into
364 # -O is pretty desirable, otherwise no inlining of prelude
365 # things (incl "+") happens when compiling with this compiler
367 # -fgenerics switches on generation of support code for
368 # derivable type classes. This is now off by default,
369 # but we switch it on for the libraries so that we generate
370 # the code in case someone importing wants it
372 GhcLibHcOpts=-O -Rghc-timing -fgenerics
374 # Win32 only: Enable the RTS and libraries to be built as DLLs
375 DLLized=@EnableWin32DLLs@
377 # Strip local symbols from libraries? This can make the libraries smaller,
378 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
382 # These are the URL patterns that Haddock uses to generate the "Source
383 # File" links on each page.
384 CorePackageSourceURL = http://darcs.haskell.org/ghc-6.6/packages/$(PACKAGE)/%{FILE}
385 ExtraPackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
387 # These are the packages required to be present in order to bootstrap GHC
388 # NB. must be synced with libraries/core-packages
389 CorePackages = base Cabal haskell98 readline regex-base regex-compat \
390 regex-posix parsec stm template-haskell unix Win32
392 # ----------------------------------------------------------------------------
393 # Object-file splitting
395 # Set SplitObjs=YES or NO in your build.mk
397 # Don't use -split-objs in in GhcLibHcOpts, because the build
398 # system needs to do other special magic if you are
399 # doing object-file splitting
401 # lazy test, so that $(GhcUnregisterised) can be set in build.mk
402 SplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),\
403 $(if $(filter YES,$(BootingFromHC)),\
405 $(if $(filter NO,$(GhcUnregisterised)),\
413 # Build the ObjectIO ?
415 GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
417 # .NET interop support?
419 DotnetSupport=@DotnetSupport@
421 # Build unix package?
423 GhcLibsWithUnix=@GhcLibsWithUnix@
425 # ----------------------------------------------------------------------------
426 # Options for GHC's RTS
428 # For an optimised RTS (you probably don't want to change these; we build
429 # a debugging RTS by default now. Use -debug to get it).
430 GhcRtsHcOpts=-optc-O2
431 GhcRtsCcOpts=-fomit-frame-pointer
433 # Include the front panel code? Needs GTK+.
434 GhcRtsWithFrontPanel = NO
436 # Include support for CPU performance counters via the PAPI library in the RTS?
437 # (PAPI: http://icl.cs.utk.edu/papi/)
439 HavePapi = @HavePapi@
441 ################################################################################
445 # nofib specific options
447 ################################################################################
449 WithNofibHc = $(GHC_INPLACE)
451 # NoFibSubDirs controls which set of tests should be run
452 # You can run one or more of
460 NoFibSubDirs = imaginary spectral real
462 # The different ways to build nofib. Default is just to mirror
463 # what is done for the ghc prelude libraries.
465 NoFibWays = $(GhcLibWays)
467 # Haskell compiler options for nofib
470 # Number of times to run each program
473 ################################################################################
475 # Paths (see paths.mk)
477 ################################################################################
479 # Directory used by GHC (and possibly other tools) for storing
480 # temporary files. If your TMPDIR isn't big enough, either override
481 # this in build.mk or set your environment variable "TMPDIR" to point
482 # to somewhere with more space. (TMPDIR=. is a good choice).
484 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
485 # override an environment variable with the value of the make variable
486 # of the same name (if it exists) when executing sub-processes, so
487 # setting the TMPDIR env var would have no effect in the build tree.
489 DEFAULT_TMPDIR = /tmp
490 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
491 DEFAULT_TMPDIR = /C/TEMP
493 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
494 DEFAULT_TMPDIR = /C/TEMP
497 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
498 FPTOOLS_TOP_ABS = @hardtop@
499 # The platform specific version of 'hardtop'.
500 FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
502 BIN_DIST_NAME=ghc-$(ProjectVersion)
503 BIN_DIST_TOPDIR=$(FPTOOLS_TOP_ABS)
504 BIN_DIST_DIR=$(BIN_DIST_TOPDIR)/$(BIN_DIST_NAME)
507 # Installation directories, we don't use half of these,
508 # but since the configure script has them on offer while
509 # passing through, we might as well set them.
512 datarootdir = @datarootdir@
513 exec_prefix = @exec_prefix@
517 includedir = @includedir@
518 oldincludedir = @oldincludedir@
521 ifeq "$(Windows)" "YES"
523 ifeq "$(strip $(prefix))" ""
527 # Hack: our directory layouts tend to be different on Windows, so
528 # hack around configure's bogus assumptions here.
535 # Unix: override libdir and datadir to put ghc-specific stuff in
536 # a subdirectory with the version number included.
538 libdir = $(libdir0)/ghc-$(ProjectVersion)
539 datadir = $(datadir0)/ghc-$(ProjectVersion)
543 # Default place for putting interface files is $(libdir)
544 # (overriden for packages in package.mk)
548 # Default values for most of the above are only set if
549 # they weren't configured to anything in particular
550 # via the configure script. (i.e., we make no assumption
551 # that the autoconf-generated script will assign defaults
552 # to all of the above).
554 ifeq "$(strip $(exec_prefix))" ""
555 exec_prefix = $(prefix)
557 ifeq "$(strip $(bindir))" ""
558 bindir = $(exec_prefix)/bin
562 # NOTE: by intention, libexecdir and libdir point to
564 # => Only way to override this is to set libexecdir= on the command line.
565 # (NOTE: configure script setting is ignored).
566 libexecdir = $(libdir)
568 ifeq "$(strip $(datadir))" ""
569 datadir = $(prefix)/share
571 ifeq "$(strip $(libdir))" ""
572 libdir = $(exec_prefix)/lib
574 ifeq "$(strip $(includedir))" ""
575 includedir = $(prefix)/include
577 ifeq "$(strip $(oldincludedir))" ""
578 oldincludedir = /usr/include
580 ifeq "$(strip $(mandir))" ""
581 mandir = $(prefix)/man
584 #-----------------------------------------------------------------------------
585 # install configuration
588 # Set this to have files installed with a specific owner
593 # Set this to have files installed with a specific group
598 # Invocations of `install' for the four different classes
601 INSTALL_PROGRAM = $(INSTALL) -m 755
602 INSTALL_SCRIPT = $(INSTALL) -m 755
603 INSTALL_SHLIB = $(INSTALL) -m 755
604 INSTALL_DATA = $(INSTALL) -m 644
605 INSTALL_MAN = $(INSTALL) -m 644
606 INSTALL_DIR = $(MKDIRHIER)
608 # -----------------------------------------------------------------------------
609 # Utilities programs: flags
611 # If you want to give any standard flags to pretty much any utility
612 # (see utils.mk for a complete list), by adding a line here
616 # where P is the utility. For example, to add -O to all Haskell
621 SRC_HC_OPTS += -H16m -O
623 # These flags make flex 8-bit
626 SRC_INSTALL_BIN_OPTS += -s
628 # lint gets all CPP's flags too
629 SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
630 WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
632 # Default fptools options for dllwrap.
633 SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
635 # Flags for CPP when running GreenCard on .pgc files
636 GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
639 ################################################################################
641 # Layout of the source tree
643 ################################################################################
645 # Here we provide defines for the various directories in the source tree,
646 # so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
647 # indicates a directory relative to the top of the source tree, whereas
648 # $(GHC_FOO_DIR) is a directory relative to the current directory.
649 # $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
651 GHC_UTILS_DIR_REL = utils
652 GHC_INCLUDE_DIR_REL = includes
653 GHC_COMPILER_DIR_REL = compiler
654 GHC_RTS_DIR_REL = rts
655 GHC_UTILS_DIR_REL = utils
656 GHC_DRIVER_DIR_REL = driver
657 GHC_COMPAT_DIR_REL = compat
659 GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
660 GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
661 GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
662 GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
663 GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
664 GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
665 GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
666 GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
667 GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
668 GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
669 GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
670 GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
671 GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
672 GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
674 GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
675 GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
676 GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
678 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
679 GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
680 GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
681 GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
682 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
683 GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
684 GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
686 GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
687 GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
688 GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
689 GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
690 GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
691 GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
692 GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
693 GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
694 GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
695 GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL)
696 GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
697 GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
698 GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
699 GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
701 GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
702 GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
703 GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
705 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
706 GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
707 GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
708 GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
709 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
710 GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
711 GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
713 GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
714 GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
715 GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
716 GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
717 GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
718 GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
719 GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
720 GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
721 GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
722 GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
723 GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
724 GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
725 GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
726 GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
728 GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
729 GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
730 GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
732 # -----------------------------------------------------------------------------
733 # Names of programs in the GHC tree
735 # xxx_PGM the name of an executable, without the path
736 # xxx the executable relative to the current dir
738 GHC_UNLIT_PGM = unlit$(exeext)
739 GHC_HP2PS_PGM = hp2ps
740 GHC_HSTAGS_PGM = hasktags
741 GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
742 GHC_TOUCHY_PGM = touchy$(exeext)
743 GHC_MANGLER_PGM = ghc-asm
744 GHC_SPLIT_PGM = ghc-split
745 GHC_SYSMAN_PGM = SysMan
746 GHC_PKG_INPLACE_PGM = ghc-pkg-inplace$(dot_bat)
747 GHC_GENPRIMOP_PGM = genprimopcode
748 GHC_GENAPPLY_PGM = genapply
749 GHC_MKDEPENDC_PGM = mkdependC
751 GHC_MKDIRHIER_PGM = mkdirhier
752 GHC_LNDIR_PGM = lndir
753 GHC_RUNTEST_PGM = runstdtest
755 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
763 UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
764 HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
765 HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
766 HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
767 MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
768 SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
769 SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
770 GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM)
771 GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
772 GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
773 MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
774 LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
775 MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
776 LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
777 RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
779 GENERATED_FILE = chmod a-w
780 EXECUTABLE_FILE = chmod +x
782 #-----------------------------------------------------------------------------
783 # Haskell compilers and mkdependHS
785 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
786 # compilers, if available.
788 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
789 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
791 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
792 # (because the version numbers have to be calculated).
795 GhcDir = $(dir $(GHC))
797 # Set to YES if $(GHC) has the readline package installed
798 GhcHasReadline = @GhcHasReadline@
803 # Sometimes we want to invoke ghc from the build tree in different
804 # places (eg. it's handy to have a nofib & a ghc build in the same
805 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
807 GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace
808 GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace
809 GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace
810 GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace
812 ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
814 # We are using the stage1 compiler to compile Haskell code, set up
815 # some variables appropriately:
817 MKDEPENDHS =$(GHC_STAGE1)
818 GhcVersion = @ProjectVersion@
819 GhcPatchLevel = @ProjectPatchLevel@
820 # oops, these are wrong:
821 GhcMajVersion = @GhcMajVersion@
822 GhcMinVersion = @GhcMinVersion@
830 else # not UseStage1 or BootingFromHc
834 GhcVersion = @GhcVersion@
835 GhcPatchLevel = @GhcPatchLevel@
836 GhcMajVersion = @GhcMajVersion@
837 GhcMinVersion = @GhcMinVersion@
839 # Some useful GHC version predicates:
840 ghc_ge_601 = @ghc_ge_601@
841 ghc_ge_602 = @ghc_ge_602@
842 ghc_ge_603 = @ghc_ge_603@
843 ghc_ge_605 = @ghc_ge_605@
844 ghc_ge_607 = @ghc_ge_607@
847 # Canonicalised ghc version number, used for easy (integer) version
848 # comparisons. We must expand $(GhcMinVersion) to two digits by
849 # adding a leading zero if necessary:
850 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
851 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
853 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
856 #-----------------------------------------------------------------------------
859 # NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
860 # the flag --with-gcc=<blah> instead. The reason is that the configure script
861 # needs to know which gcc you're using in order to perform its tests.
865 WhatGccIsCalled = @WhatGccIsCalled@
866 GccVersion = @GccVersion@
867 ifeq "$(strip $(HaveGcc))" "YES"
868 ifneq "$(strip $(UseGcc))" "YES"
871 CC = $(WhatGccIsCalled)
872 GccDir = $(dir $(WhatGccIsCalled))
876 # default C compiler flags
877 SRC_CC_OPTS = @SRC_CC_OPTS@
879 ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
883 #-----------------------------------------------------------------------------
884 # GMP Library (version 2.0.x or above)
886 HaveLibGmp = @HaveLibGmp@
889 GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
890 GMP_LIB_DIRS=@GMP_LIB_DIRS@
892 #-----------------------------------------------------------------------------
893 # GMP framework (Mac OS X)
895 HaveFrameworkGMP = @HaveFrameworkGMP@
897 #-----------------------------------------------------------------------------
900 HaveLibMingwEx = @HaveLibMingwEx@
902 #-----------------------------------------------------------------------------
903 # Flex (currently unused, could be moved to glafp-utils)
906 # Don't bother with -lfl, we define our own yywrap()s anyway.
908 #WAS:FLEX_LIB = @LEXLIB@
910 #-----------------------------------------------------------------------------
911 # Other standard (ha!) Unix utilities
914 ArSupportsInput = @ArSupportsInput@
915 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
916 BASH = /usr/local/bin/bash
918 CONTEXT_DIFF = @ContextDiffCmd@
920 CPP = @CPP@ @CPPFLAGS@
923 # RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
924 # behave plausibly on Haskell sources.
926 RAWCPP_FLAGS = -undef -traditional
931 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
932 # install-sh script (if chosen). This not terribly useful to us, so we convert
933 # it into an abs. path.
935 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
947 PREPROCESSCMD = $(CC) -E
955 # Some ld's support the -x flag and some don't, so the configure
956 # script detects which we have and sets LdXFlag to "-x" or ""
960 # GNU ld supports input via a linker script, which is useful to avoid
961 # overflowing command-line length limits.
962 LdIsGNULd = @LdIsGNULd@
965 # In emergency situations, REAL_SHELL is used to perform shell commands
966 # from within the ghc driver script, by scribbling the command line to
967 # a temp file and then having $(REAL_SHELL) execute it.
969 # The reason for having to do this is that overly long command lines
970 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
971 # 2.5.1), which is why this backdoor is provided. The situation of overly
972 # long command lines is either encountered while doing `make boot' in compiler/,
973 # or when linking the compiler binary (`hsc').
975 # We do not use SHELL to execute long commands, as `make' will more than likely
976 # override whatever setting you have in your environment while executing.
978 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
979 # as it is SHELL that will show up the bogosity in the first place, but setting
980 # it to anything else isn't really portable.
982 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
983 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
993 # This is special to literate/, ToDo: add literate-specific
994 # configure setup to literate/.
999 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
1007 GTK_CONFIG = @GTK_CONFIG@
1009 # Set this if you want to use Inno Setup to build a Windows installer
1010 # when you make a bindist
1013 #-----------------------------------------------------------------------------
1016 XSLTPROC = @XsltprocCmd@
1017 XMLLINT = @XmllintCmd@
1019 XMLTEX = @XmltexCmd@
1020 PDFXMLTEX = @PdfxmltexCmd@
1023 DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
1025 XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
1026 --stringparam section.autolabel 1 \
1027 --stringparam section.label.includes.component.label 1
1029 #-----------------------------------------------------------------------------
1030 # FPtools support software
1035 # .NET support software
1043 GHC_PKG = @GhcPkgCmd@
1048 GREENCARD = @GreenCardCmd@
1049 GREENCARD_VERSION = @GreenCardVersion@
1055 HAPPY_VERSION = @HappyVersion@
1057 # Options to pass to Happy when we're going to compile the output with GHC
1059 GHC_HAPPY_OPTS = -agc
1061 # Temp. to work around performance problems in the HEAD around 8/12/2003,
1062 # A Happy compiled with this compiler needs more stack.
1063 SRC_HAPPY_OPTS = +RTS -K2m -RTS
1069 ALEX_VERSION = @AlexVersion@
1071 # Options to pass to Happy when we're going to compile the output with GHC
1078 HADDOCK = @HaddockCmd@
1081 # Options for compiling in different `ways'.
1083 # To configure up your own way, have a look at some of the standard ways
1084 # such as profiling, and create your own set of WAY_*_OPTS defs below.
1085 # After having done that, add your way string to WAYS, and after having
1086 # run the configure script, the different projects will add the new way
1087 # to the list of ways they support.
1091 # Definitions of the different ways:
1095 # - description, e.g., profiling
1096 # * what they mean to the driver:
1097 # - WAY_p_HC_OPTS gives the list of command-line options
1102 # The ways currently defined.
1104 ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
1105 USER_WAYS=a b c d e f g h j k l m n o A B
1108 # The following ways currently have treated specially, p u t mg,
1109 # as the driver script treats these guys specially and needs to carefully be told
1110 # about the options for these. Hence, we hide the required command line options
1111 # for these in the driver, as this is the only place they are needed.
1113 # If you want to add to these default options, fill in the variables below:
1117 WAY_i_HC_OPTS= -filx -fruntime-types
1120 WAY_p_NAME=profiling
1121 WAY_p_HC_OPTS= -prof
1124 WAY_t_NAME=ticky-ticky profiling
1125 WAY_t_HC_OPTS= -ticky
1128 WAY_u_NAME=unregisterized (using portable C only)
1129 WAY_u_HC_OPTS=-unreg
1132 WAY_mp_NAME=parallel
1133 WAY_mp_HC_OPTS=-parallel
1137 WAY_mg_HC_OPTS=-gransim
1140 # These ways apply to the RTS only:
1144 WAY_thr_NAME=threaded
1145 WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
1148 WAY_thr_p_NAME=threaded profiled
1149 WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
1152 WAY_debug_NAME=debug
1153 WAY_debug_HC_OPTS=-optc-DDEBUG
1156 WAY_debug_p_NAME=debug profiled
1157 WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
1160 WAY_debug_u_NAME=debug unregisterised
1161 WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
1164 WAY_debug_t_NAME=debug ticky-ticky profiling
1165 WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
1168 WAY_thr_debug_NAME=threaded
1169 WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
1171 # Way 'thr_debug_p':
1172 WAY_thr_debug_p_NAME=threaded
1173 WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
1176 # Add user-way configurations here:
1226 ################################################################################
1228 # 31-bit-Int Core files
1230 ################################################################################
1233 # It is possible to configure the compiler and prelude to support 31-bit
1234 # integers, suitable for a back-end and RTS using a tag bit on a 32-bit
1235 # architecture. Currently the only useful output from this option is external Core
1236 # files. The following additions to your build.mk will produce the
1237 # 31-bit core output. Note that this is *not* just a library "way"; the
1238 # compiler must be built a special way too.
1240 # GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
1241 # GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
1242 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
1245 ################################################################################
1247 # Library configure arguments
1249 ################################################################################
1251 CONFIGURE_ARGS = @CONFIGURE_ARGS@