4 #################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 #################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 #################################################################################
43 # Project-wide platform variables
45 #################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what. (cygwin32 only).
92 #################################################################################
96 # Set of options applicable to all fptools projects
98 #################################################################################
101 # What parts to build: An fptools build tree does not have to be built
102 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
103 # control which projects are built.
105 # Caution: the projects are built in the order given here, so if some
106 # projects use others you must list them in the correct order.
108 # Generally: * glafp-utils should be first
112 # then it's up to you
114 ProjectsToBuild = glafp-utils ghc
116 # Make a distinction between building and installing
118 ProjectsToInstall = glafp-utils ghc
121 # Should the various project tests directories be built?
123 IncludeTestDirsInBuild=NO
126 # Name variables for the main project
129 ProjectName = $($(Project)ProjectName)
130 ProjectNameShort = $($(Project)ProjectNameShort)
131 ProjectVersion = $($(Project)ProjectVersion)
132 ProjectPatchLevel = $($(Project)ProjectPatchLevel)
134 #################################################################################
138 # Set of (configurable) options needed by the ghc tree
139 # plus their default options (if any).
141 #################################################################################
144 # Name variables for ghc:
146 GhcProjectName = The Glorious Glasgow Haskell Compilation System
147 GhcProjectNameShort = ghc
148 GhcProjectVersion = 3.00
149 GhcProjectPatchLevel = 0
151 #---------------------------------------------------------------
153 # Variables that control how the compiler itself is built
155 # Specify the Haskell compiler to be used to compile the compiler itself
157 # WithGhcHc Path name of the compiler to use
159 # WithGhcHcType What "type" of compiler is being used
169 # WithGhcHcType=HC_GLASGOW_GHC
171 # Extra ways in which to build the compiler (for example, you might want to
172 # build a profiled compiler so you can see where it spends its time)
175 # Extra option flags to pass to the compiler that compiles the compiler
176 # (Ones that are essential are wired into ghc/compiler/Makefile)
178 # -H25m allocate a bigger heap (default is 6m)
180 # -O compile an optimised compiler
181 # NB! If you add -O you'll almost certainly need to increase
182 # the amount of heap space too (to 15m or more)
184 # -DDEBUG include consistency/assertion checks in the compiled compiler
186 # -dcore-lint check the types after every pass of the compiler;
187 # a pretty strong internal check
190 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
191 GhcWithHscBuiltViaC=NO
193 # Build hsc with -O and turn optimising flag on when compiling
194 # the intermediate C file
195 GhcUseGccForOptAsm=YES
197 # Compile intermediate C file with debugging options set.
198 GhcUseGccForDebuggingAsm=YES
200 # Build a registerised version of hsc and runtime
201 # (you'd be desperate or silly not to).
202 GhcWithRegisterised=YES
204 # Build a compiler with a native code generator backend
205 # (as well as a C backend)
207 # Target platforms supported:
208 # i386, alpha & sparc
209 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
212 # Building various ways?
213 # (right now, empty if not).
214 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
215 BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
216 BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
217 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
218 BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
220 #---------------------------------------------------------------
222 # Variables that control how the prelude libraries and runtime system are built
224 # What extra ways to build the libraries in
225 # In addition to the normal sequential way, the default is to also build
226 # profiled prelude libraries.
229 # Option flags to pass to GHC when it's compiling prelude modules
230 # Typically these are things like -O or -dcore-lint
231 # The ones that are *essential* are wired into ghc/lib/Makefile
233 # -O is pretty desirable, otherwise no inlining of prelude
234 # things (incl "+") happens when compiling with this compiler
237 # Splitting profiled code produces awfully large archives under ELF, so
238 # we turn it off here.
240 # ToDo: track down the source of this.
242 ifeq "$(strip $(way))" "p"
245 ifeq "$(strip $(way))" "mr"
248 GhcLibHcOpts= -O -split-objs -odir $*
252 # Build the Haskell Readline bindings?
254 GhcLibsWithReadline=NO
256 # Include path to readline.h
257 # (no path == in standard include path)
261 # Build the socket libraries? (ToDo: is this used?)
263 GhcLibsWithSockets=YES
265 # what to include in a binary distribution
269 GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
270 GhcBinDistPrlScripts = ghc-$(GhcProjectVersion) stat2resid hstags mkdependHS
271 GhcBinDistLibPrlScripts = hscpp
272 GhcBinDistBins = hp2ps
274 #################################################################################
278 # Happy specific options
280 #################################################################################
283 # Name variables for happy:
285 HappyProjectName = Happy
286 HappyProjectNameShort = happy
287 HappyProjectVersion = 1.5
288 HappyProjectPatchLevel = 0
290 # The compiler you'd like to use to compile Happy
291 WithHappyHc = $(WithGhcHc)
293 # HappyHcOpts gives the flags to pass to the Haskell compiler used
294 # to compile the Happy sources with.
298 # what to include in a binary distribution
301 HappyBinDistDirs = happy
302 HappyBinDistDocs = happy/doc
303 HappyBinDistShScripts = happy
305 #################################################################################
309 # Haggis specific options
311 #################################################################################
313 #################################################################################
317 # Green-card specific options
319 #################################################################################
322 #################################################################################
326 # nofib specific options
328 #################################################################################
331 # NoFibSubDirs controls which set of tests should be run
332 # You can run one or more of
341 NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
343 # The different ways to build nofib. Default is just to mirror
344 # what is done for the ghc prelude libraries.
346 NoFibWays=$(GhcLibWays)
348 # Haskell compiler options for nofib
351 # ==============================================================================
353 # END OF PROJECT-SPECIFIC STUFF
355 # Now come the generic configuration options
357 # ==============================================================================
359 #################################################################################
361 # Paths (see paths.mk)
363 #################################################################################
367 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
369 FPTOOLS_TOP_ABS = @hardtop@
372 # Installation directories, we don't use half of these,
373 # but since the configure script has them on offer while
374 # passing through, we might as well set them.
377 exec_prefix = @exec_prefix@
379 #UNUSED, see below: libexecdir = @libexecdir@
381 #sysconfdir = @datadir@
382 #sharedstatedir = @sharedstatedir@
383 #localstatedir = @localstatedir@
386 includedir = @includedir@
387 oldincludedir = @oldincludedir@
389 #UNUSED:srcdir = @srcdir@
392 # Default values for most of the above are only set if
393 # they weren't configured to anything in particular
394 # via the configure script. (i.e., we make no assumption
395 # that the autoconf-generated script will assign defaults
396 # to all of the above).
398 ifeq "$(strip $(exec_prefix))" ""
399 exec_prefix = $(prefix)
401 ifeq "$(strip $(bindir))" ""
402 bindir = $(exec_prefix)/bin
406 # NOTE: by intention, libexecdir and libdir point to
408 # => Only way to override this is to set libexecdir= on the command line.
409 # (NOTE: configure script setting is ignored).
410 libexecdir = $(libdir)
412 ifeq "$(strip $(datadir))" ""
413 datadir = $(prefix)/share
415 ifeq "$(strip $(libdir))" ""
416 libdir = $(exec_prefix)/lib
418 ifeq "$(strip $(infodir))" ""
419 infodir = $(prefix)/info
421 ifeq "$(strip $(includedir))" ""
422 includedir = $(prefix)/include
424 ifeq "$(strip $(oldincludedir))" ""
425 oldincludedir = /usr/include
427 ifeq "$(strip $(mandir))" ""
428 mandir = $(prefix)/man
432 #################################################################################
434 # Utilities programs: flags
436 #################################################################################
438 # If you want to give any standard flags to pretty much any utility
439 # (see utils.mk for a complete list), by adding a line here
443 # where P is the utility. For example, to add -O to all Haskell
449 #################################################################################
451 # Utilities programs: where to find them
453 #################################################################################
455 #-----------------------------------------------------------------------------
456 # FPtools Utility locations
458 # By default, the various utils needed to be build ghc and chums
459 # is set up to point to the utils/ directory. Define here the
460 # path prefix for the utilities. Notice that it's a prefix with
461 # a trailing slash, so that it can be concatenated directly on
462 # front of a program name; if it's not set then we just look
463 # along the shell's $(PATH)
465 # If instead you want to use installed or your own versions of these,
466 # override the various *_PREFIX in build.mk, i.e., having the following
471 # will force `make' to rummage around in your PATH to find `mkdependC' (not
472 # sure it would need it in the first place, but still).
474 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
476 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
477 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
478 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
479 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
480 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
481 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
482 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
483 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
484 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
485 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
488 LITERATE = $(FPTOOLS_TOP)/literate
490 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
491 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
492 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
494 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
495 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
497 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
498 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
499 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
500 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
501 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
502 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
505 #-----------------------------------------------------------------------------
506 # Haskell compiler and mkdependHS
508 HC = $(FPTOOLS_TOP)/ghc/driver/ghc
511 #-----------------------------------------------------------------------------
517 WhatGccIsCalled = gcc
518 ifeq "$(strip $(HaveGcc))" "YES"
519 ifneq "$(strip $(UseGcc))" "YES"
522 CC = $(WhatGccIsCalled)
526 #-----------------------------------------------------------------------------
532 #-----------------------------------------------------------------------------
533 # Other standard (ha!) Unix utilities
536 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
537 BASH = /usr/local/bin/bash
539 # Could be either gzip or compress
541 COMPRESS = @CompressCmd@
542 COMPRESS_SUFFIX = @CompressSuffix@
544 CONTEXT_DIFF = @ContextDiffCmd@
552 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
553 # install-sh script (if chosen). This not terribly useful to us, so we convert
554 # it into an abs. path.
556 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
565 PREPROCESSCMD = $(CC) -E
572 # In emergency situations, REAL_SHELL is used to perform shell commands
573 # from within the ghc driver script, by scribbling the command line to
574 # a temp file and then having $(REAL_SHELL) execute it.
576 # The reason for having to do this is that overly long command lines
577 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
578 # 2.5.1), which is why this backdoor is provided. The situation of overly
579 # long command lines is either encountered while doing `make boot' in ghc/compiler,
580 # or when linking the compiler binary (`hsc').
582 # We do not use SHELL to execute long commands, as `make' will more than likely
583 # override whatever setting you have in your environment while executing.
585 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
586 # as it SHELL that will show up the bogosity in the first place, but setting
587 # it to anything else isn't really portable.
589 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
590 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
599 # Under cygwin32, we have to deal with .exe suffixes
601 EXE_SUFFIX=@ExeSuffix@
604 # This is special to literate/, ToDo: add literate-specific
605 # configure setup to literate/.
610 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
618 #-----------------------------------------------------------------------------
619 # SGML stuff (currently not configured - we assume you have it)
621 SGML2LATEX = sgml2latex
622 SGML2HTML = sgml2html
623 SGML2INFO = sgml2info
626 #-----------------------------------------------------------------------------
627 # FPtools support software
629 # Stuff from fptools/glafp-utils
630 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
631 LTX = $(LTX_PREFIX)ltx
632 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
633 LNDIR = $(LNDIR_PREFIX)lndir
634 MSUB = $(MSUB_PREFIX)msub
635 ETAGS = $(ETAGS_PREFIX)etags
636 VERBATIM = $(VERBATIM_PREFIX)verbatim
637 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
638 SGML2LATEX = sgml2latex
639 RUNTEST = $(RUNTEST_PREFIX)runstdtest
641 HAPPY_VERSION = @HappyVersion@
643 GREENCARD = @GreencardCmd@
646 # Stuff from fptools/literate
648 INFO = $(UTIL_PREFIX)info
649 MAKEINFO = $(INFO_PREFIX)makeinfo
650 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
651 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
652 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
653 LIT2HTML = $(LITERATE_PREFIX)lit2html
654 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
655 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
656 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
657 LIT2TEXT = $(LITERATE_PREFIX)lit2text
658 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
661 # Stuff from fptools/ghc/utils
663 UNLIT = $(UNLIT_PREFIX)unlit
664 UGEN = $(UGEN_PREFIX)ugen
665 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
666 HP2PS = $(HP2PS_PREFIX)hp2ps
667 HSCPP = $(HSCPP_PREFIX)hscpp
668 HSTAGS = $(HSTAGS_PREFIX)hstags
671 # Options for the compiling different `ways'. Various projects within
672 # the glorious fptools tree support building in various user-configured
673 # ways. For instance, you could set up one `way' such that the prelude
674 # libraries all were built with the option -ffoldr-build-on.
676 # To configure up your own way, have a look at some of the standard ways
677 # such as profiling, and create your own set of WAY_*_OPTS defs below.
678 # After having done that, add your way string to WAYS, and after having
679 # run the configure script, the different projects will add the new way
680 # to the list of ways they support.
684 # IMPORTANT! The WAYS variable configures the different `ways'
685 # you want to build a project (or maybe just parts of it, as is
686 # the case for ghc/). This variable is intended set inside the
687 # project mk setup, enforcing a global fptools WAYS is a bit too
688 # much (do you *really* want to build glafp-utils the profiled-concurrent
693 # Definitions of the different ways:
697 # - description, e.g., profiling
698 # * what they mean to the driver:
699 # - WAY_p_HC_OPTS gives the list of command-line options
704 # The ways currently defined.
706 ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
709 # The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
710 # as the driver script treats these guys specially and needs to carefully be told
711 # about the options for these. Hence, we hide the required command line options
712 # for these in the ghc/driver, as this is the only place they are needed.
714 # If you want to add to these default options, fill in the variables below:
720 WAY_t_NAME=ticky-ticky profiling
721 WAY_t_HC_OPTS= -ticky
724 WAY_u_NAME=unregisterized (using portable C only)
727 # Way `mc': concurrent
728 WAY_mc_NAME=concurrent
729 WAY_mc_HC_OPTS=-concurrent
732 WAY_mr_NAME=profiled concurrent
733 WAY_mr_HC_OPTS=-prof -concurrent
736 WAY_mt_NAME=ticky-ticky concurrent
737 WAY_mt_HC_OPTS=-ticky -concurrent
741 WAY_mp_HC_OPTS=-parallel
747 WAY_mg_HC_OPTS=-gransim
750 # Ways for different garbage collectors
752 WAY_2s_NAME=2-space GC
755 WAY_1s_NAME=1-space GC
758 WAY_du_NAME=dual-mode GC
762 # Add user-way configurations here: