4 #################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 #################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 #################################################################################
43 # Project-wide platform variables
45 #################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what. (cygwin32 only).
92 #################################################################################
96 # Set of options applicable to all fptools projects
98 #################################################################################
101 # What parts to build: An fptools build tree does not have to be built
102 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
103 # control which projects are built.
105 # Caution: the projects are built in the order given here, so if some
106 # projects use others you must list them in the correct order.
108 # Generally: * glafp-utils should be first
111 # then it's up to you
113 ProjectsToBuild = glafp-utils ghc
115 # Make a distinction between building and installing
117 ProjectsToInstall = glafp-utils ghc
120 # Should the various project tests directories be built?
122 IncludeTestDirsInBuild=NO
125 # Name variables for the main project
128 ProjectName = $($(Project)ProjectName)
129 ProjectNameShort = $($(Project)ProjectNameShort)
130 ProjectVersion = $($(Project)ProjectVersion)
131 ProjectPatchLevel = $($(Project)ProjectPatchLevel)
133 #################################################################################
137 # Set of (configurable) options needed by the ghc tree
138 # plus their default options (if any).
140 #################################################################################
143 # Name variables for ghc:
145 GhcProjectName = The Glorious Glasgow Haskell Compilation System
146 GhcProjectNameShort = ghc
147 GhcProjectVersion = 3.01
148 GhcProjectPatchLevel = 0
150 #---------------------------------------------------------------
152 # Variables that control how the compiler itself is built
154 # Specify the Haskell compiler to be used to compile the compiler itself
156 # WithGhcHc Path name of the compiler to use
158 # WithGhcHcType What "type" of compiler is being used
168 # WithGhcHcType=HC_GLASGOW_GHC
170 # Extra ways in which to build the compiler (for example, you might want to
171 # build a profiled compiler so you can see where it spends its time)
174 # Extra option flags to pass to the compiler that compiles the compiler
175 # (Ones that are essential are wired into ghc/compiler/Makefile)
177 # -H25m allocate a bigger heap (default is 6m)
179 # -O compile an optimised compiler
180 # NB! If you add -O you'll almost certainly need to increase
181 # the amount of heap space too (to 15m or more)
183 # -DDEBUG include consistency/assertion checks in the compiled compiler
185 # -dcore-lint check the types after every pass of the compiler;
186 # a pretty strong internal check
189 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
190 GhcWithHscBuiltViaC=NO
192 # Build hsc with -O and turn optimising flag on when compiling
193 # the intermediate C file
194 GhcUseGccForOptAsm=YES
196 # Compile intermediate C file with debugging options set.
197 GhcUseGccForDebuggingAsm=YES
199 # Build a registerised version of hsc and runtime
200 # (you'd be desperate or silly not to).
201 GhcWithRegisterised=YES
203 # Build a compiler with a native code generator backend
204 # (as well as a C backend)
206 # Target platforms supported:
207 # i386, alpha & sparc
208 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
211 # Building various ways?
212 # (right now, empty if not).
213 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
214 BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
215 BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
216 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
217 BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
219 #---------------------------------------------------------------
221 # Variables that control how the prelude libraries and runtime system are built
223 # What extra ways to build the libraries in
224 # In addition to the normal sequential way, the default is to also build
225 # profiled prelude libraries.
228 # Option flags to pass to GHC when it's compiling prelude modules
229 # Typically these are things like -O or -dcore-lint
230 # The ones that are *essential* are wired into ghc/lib/Makefile
232 # -O is pretty desirable, otherwise no inlining of prelude
233 # things (incl "+") happens when compiling with this compiler
236 # Splitting profiled code produces awfully large archives under ELF, so
237 # we turn it off here.
239 # ToDo: track down the source of this.
241 ifeq "$(strip $(way))" "p"
244 ifeq "$(strip $(way))" "mr"
247 GhcLibHcOpts= -O -split-objs -odir $*
251 # Build the Haskell Readline bindings?
253 GhcLibsWithReadline=NO
255 # Include path to readline.h
256 # (no path == in standard include path)
260 # Build the socket libraries? (ToDo: is this used?)
262 GhcLibsWithSockets=YES
264 # what to include in a binary distribution
268 GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
269 GhcBinDistPrlScripts = ghc-$(GhcProjectVersion) stat2resid hstags mkdependHS
270 GhcBinDistLibPrlScripts = hscpp
271 GhcBinDistBins = hp2ps
273 #################################################################################
277 # Happy specific options
279 #################################################################################
282 # Name variables for happy:
284 HappyProjectName = Happy
285 HappyProjectNameShort = happy
286 HappyProjectVersion = 1.5
287 HappyProjectPatchLevel = 0
289 # The compiler you'd like to use to compile Happy
290 WithHappyHc = $(WithGhcHc)
292 # HappyHcOpts gives the flags to pass to the Haskell compiler used
293 # to compile the Happy sources with.
297 # what to include in a binary distribution
300 HappyBinDistDirs = happy
301 HappyBinDistDocs = happy/doc
302 HappyBinDistShScripts = happy
304 #################################################################################
308 # Haggis specific options
310 #################################################################################
312 #################################################################################
316 # Green-card specific options
318 #################################################################################
321 #################################################################################
325 # nofib specific options
327 #################################################################################
330 # NoFibSubDirs controls which set of tests should be run
331 # You can run one or more of
340 NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
342 # The different ways to build nofib. Default is just to mirror
343 # what is done for the ghc prelude libraries.
345 NoFibWays=$(GhcLibWays)
347 # Haskell compiler options for nofib
350 # ==============================================================================
352 # END OF PROJECT-SPECIFIC STUFF
354 # Now come the generic configuration options
356 # ==============================================================================
358 #################################################################################
360 # Paths (see paths.mk)
362 #################################################################################
366 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
368 FPTOOLS_TOP_ABS = @hardtop@
371 # Installation directories, we don't use half of these,
372 # but since the configure script has them on offer while
373 # passing through, we might as well set them.
376 exec_prefix = @exec_prefix@
378 #UNUSED, see below: libexecdir = @libexecdir@
380 #sysconfdir = @datadir@
381 #sharedstatedir = @sharedstatedir@
382 #localstatedir = @localstatedir@
385 includedir = @includedir@
386 oldincludedir = @oldincludedir@
388 #UNUSED:srcdir = @srcdir@
391 # Default values for most of the above are only set if
392 # they weren't configured to anything in particular
393 # via the configure script. (i.e., we make no assumption
394 # that the autoconf-generated script will assign defaults
395 # to all of the above).
397 ifeq "$(strip $(exec_prefix))" ""
398 exec_prefix = $(prefix)
400 ifeq "$(strip $(bindir))" ""
401 bindir = $(exec_prefix)/bin
405 # NOTE: by intention, libexecdir and libdir point to
407 # => Only way to override this is to set libexecdir= on the command line.
408 # (NOTE: configure script setting is ignored).
409 libexecdir = $(libdir)
411 ifeq "$(strip $(datadir))" ""
412 datadir = $(prefix)/share
414 ifeq "$(strip $(libdir))" ""
415 libdir = $(exec_prefix)/lib
417 ifeq "$(strip $(infodir))" ""
418 infodir = $(prefix)/info
420 ifeq "$(strip $(includedir))" ""
421 includedir = $(prefix)/include
423 ifeq "$(strip $(oldincludedir))" ""
424 oldincludedir = /usr/include
426 ifeq "$(strip $(mandir))" ""
427 mandir = $(prefix)/man
431 #################################################################################
433 # Utilities programs: flags
435 #################################################################################
437 # If you want to give any standard flags to pretty much any utility
438 # (see utils.mk for a complete list), by adding a line here
442 # where P is the utility. For example, to add -O to all Haskell
448 #################################################################################
450 # Utilities programs: where to find them
452 #################################################################################
454 #-----------------------------------------------------------------------------
455 # FPtools Utility locations
457 # By default, the various utils needed to be build ghc and chums
458 # is set up to point to the utils/ directory. Define here the
459 # path prefix for the utilities. Notice that it's a prefix with
460 # a trailing slash, so that it can be concatenated directly on
461 # front of a program name; if it's not set then we just look
462 # along the shell's $(PATH)
464 # If instead you want to use installed or your own versions of these,
465 # override the various *_PREFIX in build.mk, i.e., having the following
470 # will force `make' to rummage around in your PATH to find `mkdependC' (not
471 # sure it would need it in the first place, but still).
473 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
475 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
476 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
477 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
478 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
479 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
480 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
481 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
482 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
483 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
484 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
487 LITERATE = $(FPTOOLS_TOP)/literate
489 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
490 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
491 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
493 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
494 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
496 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
497 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
498 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
499 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
500 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
501 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
504 #-----------------------------------------------------------------------------
505 # Haskell compiler and mkdependHS
507 HC = $(FPTOOLS_TOP)/ghc/driver/ghc
510 #-----------------------------------------------------------------------------
516 WhatGccIsCalled = gcc
517 ifeq "$(strip $(HaveGcc))" "YES"
518 ifneq "$(strip $(UseGcc))" "YES"
521 CC = $(WhatGccIsCalled)
525 #-----------------------------------------------------------------------------
531 #-----------------------------------------------------------------------------
532 # Other standard (ha!) Unix utilities
535 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
536 BASH = /usr/local/bin/bash
538 # Could be either gzip or compress
540 COMPRESS = @CompressCmd@
541 COMPRESS_SUFFIX = @CompressSuffix@
543 CONTEXT_DIFF = @ContextDiffCmd@
551 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
552 # install-sh script (if chosen). This not terribly useful to us, so we convert
553 # it into an abs. path.
555 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
564 PREPROCESSCMD = $(CC) -E
571 # In emergency situations, REAL_SHELL is used to perform shell commands
572 # from within the ghc driver script, by scribbling the command line to
573 # a temp file and then having $(REAL_SHELL) execute it.
575 # The reason for having to do this is that overly long command lines
576 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
577 # 2.5.1), which is why this backdoor is provided. The situation of overly
578 # long command lines is either encountered while doing `make boot' in ghc/compiler,
579 # or when linking the compiler binary (`hsc').
581 # We do not use SHELL to execute long commands, as `make' will more than likely
582 # override whatever setting you have in your environment while executing.
584 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
585 # as it SHELL that will show up the bogosity in the first place, but setting
586 # it to anything else isn't really portable.
588 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
589 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
598 # Under cygwin32, we have to deal with .exe suffixes
600 EXE_SUFFIX=@ExeSuffix@
603 # This is special to literate/, ToDo: add literate-specific
604 # configure setup to literate/.
609 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
617 #-----------------------------------------------------------------------------
618 # SGML stuff (currently not configured - we assume you have it)
620 SGML2LATEX = sgml2latex
621 SGML2HTML = sgml2html
622 SGML2INFO = sgml2info
625 #-----------------------------------------------------------------------------
626 # FPtools support software
628 # Stuff from fptools/glafp-utils
629 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
630 LTX = $(LTX_PREFIX)ltx
631 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
632 LNDIR = $(LNDIR_PREFIX)lndir
633 MSUB = $(MSUB_PREFIX)msub
634 ETAGS = $(ETAGS_PREFIX)etags
635 VERBATIM = $(VERBATIM_PREFIX)verbatim
636 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
637 SGML2LATEX = sgml2latex
638 RUNTEST = $(RUNTEST_PREFIX)runstdtest
640 HAPPY_VERSION = @HappyVersion@
642 GREENCARD = @GreencardCmd@
645 # Stuff from fptools/literate
647 INFO = $(UTIL_PREFIX)info
648 MAKEINFO = $(INFO_PREFIX)makeinfo
649 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
650 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
651 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
652 LIT2HTML = $(LITERATE_PREFIX)lit2html
653 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
654 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
655 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
656 LIT2TEXT = $(LITERATE_PREFIX)lit2text
657 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
660 # Stuff from fptools/ghc/utils
662 UNLIT = $(UNLIT_PREFIX)unlit
663 UGEN = $(UGEN_PREFIX)ugen
664 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
665 HP2PS = $(HP2PS_PREFIX)hp2ps
666 HSCPP = $(HSCPP_PREFIX)hscpp
667 HSTAGS = $(HSTAGS_PREFIX)hstags
670 # Options for the compiling different `ways'. Various projects within
671 # the glorious fptools tree support building in various user-configured
672 # ways. For instance, you could set up one `way' such that the prelude
673 # libraries all were built with the option -ffoldr-build-on.
675 # To configure up your own way, have a look at some of the standard ways
676 # such as profiling, and create your own set of WAY_*_OPTS defs below.
677 # After having done that, add your way string to WAYS, and after having
678 # run the configure script, the different projects will add the new way
679 # to the list of ways they support.
683 # IMPORTANT! The WAYS variable configures the different `ways'
684 # you want to build a project (or maybe just parts of it, as is
685 # the case for ghc/). This variable is intended set inside the
686 # project mk setup, enforcing a global fptools WAYS is a bit too
687 # much (do you *really* want to build glafp-utils the profiled-concurrent
692 # Definitions of the different ways:
696 # - description, e.g., profiling
697 # * what they mean to the driver:
698 # - WAY_p_HC_OPTS gives the list of command-line options
703 # The ways currently defined.
705 ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
708 # The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
709 # as the driver script treats these guys specially and needs to carefully be told
710 # about the options for these. Hence, we hide the required command line options
711 # for these in the ghc/driver, as this is the only place they are needed.
713 # If you want to add to these default options, fill in the variables below:
719 WAY_t_NAME=ticky-ticky profiling
720 WAY_t_HC_OPTS= -ticky
723 WAY_u_NAME=unregisterized (using portable C only)
726 # Way `mc': concurrent
727 WAY_mc_NAME=concurrent
728 WAY_mc_HC_OPTS=-concurrent
731 WAY_mr_NAME=profiled concurrent
732 WAY_mr_HC_OPTS=-prof -concurrent
735 WAY_mt_NAME=ticky-ticky concurrent
736 WAY_mt_HC_OPTS=-ticky -concurrent
740 WAY_mp_HC_OPTS=-parallel
746 WAY_mg_HC_OPTS=-gransim
749 # Ways for different garbage collectors
751 WAY_2s_NAME=2-space GC
754 WAY_1s_NAME=1-space GC
757 WAY_du_NAME=dual-mode GC
761 # Add user-way configurations here: