4 ################################################################################
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
12 # DO NOT EDIT THIS FILE!
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # This may be triggered automatically by the build system (say
16 # if config.mk.in has changed more recently than config.mk),
17 # so if you edit config.mk your changes will be spammed.
19 # - Settings in this file may be overriden by giving replacement
20 # definitions in build.mk. See build.mk.sample for a good
21 # starting point for a build.mk file.
23 # If you don't have a build.mk file then you get defaults for everything.
24 # The defaults should provide a reasonable vanilla build.
26 # This is one of only two files that configure generates (the other is config.h)
29 ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
30 ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
31 $(error GNU make version 3.79.1 or later is required.)
35 ################################################################################
40 # ProjectVersion is treated as a *string*
41 # ProjectVersionInt is treated as an *integer* (for cpp defines)
43 # Versioning scheme: A.B.C
44 # A: major version, decimal, any number of digits
45 # B: minor version, decimal, any number of digits
46 # C: patchlevel, one digit, omitted if zero.
48 # ProjectVersionInt does *not* contain the patchlevel (rationale: this
49 # figure is used for conditional compilations, and library interfaces
50 # etc. are not supposed to change between patchlevels).
52 # The ProjectVersionInt is included in interface files, and GHC
53 # checks that it's reading interface generated by the same ProjectVersion
54 # as itself. It does this even though interface file syntax may not
55 # change between versions. Rationale: calling conventions or other
56 # random .o-file stuff might change even if the .hi syntax doesn't
58 ProjectName = @ProjectName@
60 ProjectVersion = @ProjectVersion@$(ProjectTags)
61 ProjectVersionInt = @ProjectVersionInt@
62 ProjectPatchLevel = @ProjectPatchLevel@
64 ################################################################################
68 ################################################################################
70 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
71 # specifier. E.g. sparc-sun-solaris2
73 # Build platform: the platform on which we are doing this build
74 # Host platform: the platform on which these binaries will run
75 # Target platform: the platform for which this compiler will generate code
77 # We don't support build & host being different, because the build
78 # process creates binaries that are run during the build, and also
81 # If host & target are different, then we are building a compiler
82 # which will generate intermediate .hc files to port to the target
83 # architecture for bootstrapping. The libraries and stage 2 compiler
84 # will be built as HC files for the target system, and likely won't
85 # build on this host platform.
87 # An important invariant is that for any piece of source code, the
88 # platform on which the code is going to run is the HOST platform,
89 # and the platform on which we are building is the BUILD platform.
90 # Additionally for the compiler, the platform this compiler will
91 # generate code for is the TARGET. TARGET is not meaningful outside
92 # the compiler sources.
94 # Guidelines for when to use HOST vs. TARGET:
96 # - In the build system (Makefile, foo.mk), normally we should test
97 # $(HOSTPLATFORM). There are some cases (eg. installation), where
98 # we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
99 # doesn't matter which is used.
101 # - In the compiler itself, we should test HOST or TARGET depending
102 # on whether the conditional relates to the code being generated, or
103 # the platform on which the compiler is running. See the section
104 # on "Coding Style" in the commentary for more details.
106 # - In all other code, we should be testing HOST only.
108 # NOTE: cross-compiling is not well supported by the build system.
109 # You have to do a lot of work by hand to cross compile: see the
110 # section on "Porting GHC" in the Building Guide.
112 HOSTPLATFORM = @HostPlatform@
113 TARGETPLATFORM = @TargetPlatform@
114 BUILDPLATFORM = @BuildPlatform@
117 # in one or two places, we need to get at the OS version (major and
118 # perhaps even minor), HostOS_Full is the OS name reported by
119 # AC_CANONICAL_SYSTEM.
121 HostPlatform_CPP = @HostPlatform_CPP@
122 HostArch_CPP = @HostArch_CPP@
123 HostOS_CPP = @HostOS_CPP@
124 HostOS_Full = @HostOS_Full@
125 HostVendor_CPP = @HostVendor_CPP@
127 TargetPlatform_CPP = @TargetPlatform_CPP@
128 TargetArch_CPP = @TargetArch_CPP@
129 TargetOS_CPP = @TargetOS_CPP@
130 TargetVendor_CPP = @TargetVendor_CPP@
132 BuildPlatform_CPP = @BuildPlatform_CPP@
133 BuildArch_CPP = @BuildArch_CPP@
134 BuildOS_CPP = @BuildOS_CPP@
135 BuildVendor_CPP = @BuildVendor_CPP@
137 @HostPlatform_CPP@_HOST = 1
138 @TargetPlatform_CPP@_TARGET = 1
139 @BuildPlatform_CPP@_BUILD = 1
141 @HostArch_CPP@_HOST_ARCH = 1
142 @TargetArch_CPP@_TARGET_ARCH = 1
143 @BuildArch_CPP@_BUILD_ARCH = 1
145 @HostOS_CPP@_HOST_OS = 1
146 @TargetOS_CPP@_TARGET_OS = 1
147 @BuildOS_CPP@_BUILD_OS = 1
149 @HostVendor_CPP@_HOST_VENDOR = 1
150 @TargetVendor_CPP@_TARGET_VENDOR = 1
151 @BuildVendor_CPP@_BUILD_VENDOR = 1
153 ################################################################################
155 # Global configuration options
157 ################################################################################
159 # Leading underscores on symbol names in object files
160 # Valid options: YES/NO
162 LeadingUnderscore=@LeadingUnderscore@
164 # Pin a suffix on executables? If so, what (Windows only).
167 # Windows=YES if on a Windows platform
168 ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
174 # BootingFromHc - build GHC and the libraries from .hc files?
175 BootingFromHc = @BootingFromHc@
177 # BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
178 # rather than registerised code, i.e., disable the mangler?
179 BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
182 # Which ways should DocBook XML documents be built?
183 # options are: dvi ps pdf html chm HxS
187 ################################################################################
189 # Variables that control how the compiler itself is built
191 ################################################################################
193 # The compiler used to build GHC is $(GHC). To change the actual compiler
194 # used, re-configure with --with-ghc=<path-to-ghc>.
196 # Extra ways in which to build the compiler (for example, you might want to
197 # build a profiled compiler so you can see where it spends its time)
200 # Extra option flags to pass to the compiler that compiles the compiler
201 # (Ones that are essential are wired into compiler/Makefile)
202 # Typical options to use here:
204 # -DDEBUG include debugging code and assertions (will make the
205 # compiler slower and produce debugging output, but useful
208 # -dcore-lint check the types after every pass of the compiler;
209 # a pretty strong internal check of the compiler being
210 # used to compile GHC. Useful when bootstrapping.
211 GhcHcOpts=-Rghc-timing
213 # Extra options added to specific stages of the compiler bootstrap.
214 # These are placed later on the command line, and may therefore
215 # override options from $(GhcHcOpts).
220 # Build a compiler that will build *unregisterised* libraries and
221 # binaries by default. Unregisterised code is supposed to compile and
222 # run without any support for architecture-specific assembly mangling,
223 # register assignment or tail-calls, and is therefore a good way to get
224 # started when porting GHC to new architectures.
226 # If this is set to NO, you can still use the unregisterised way
227 # (way 'u') to get unregisterised code, but the default way will be
230 # NOTE: the stage1 compiler will be a registerised binary (assuming
231 # the compiler you build with is generating registerised binaries), but
232 # the stage2 compiler will be an unregisterised binary.
234 ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
235 GhcUnregisterised=YES
240 # Build a compiler with a native code generator backend
241 # (as well as a C backend)
243 # Target platforms supported:
245 # sparc has bitrotted
246 # AIX is not supported
247 ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
248 OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
250 ifeq "$(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)" "YESYESNO"
251 GhcWithNativeCodeGen=YES
253 GhcWithNativeCodeGen=NO
256 # Include support for generating Java
259 HaveLibDL = @HaveLibDL@
261 # ArchSupportsSMP should be set iff there is support for that arch in
263 ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
265 ifeq "$(ArchSupportsSMP)$(GhcUnregisterised)" "YESNO"
271 # Whether to include GHCi in the compiler. Depends on whether the RTS linker
272 # has support for this OS/ARCH combination.
274 OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
275 ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
277 ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
278 GhcWithInterpreter=YES
280 GhcWithInterpreter=NO
283 # GhcEnableTablesNextToCode tells us whether the target architecture
284 # supports placing info tables directly before the entry code
285 # (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
286 # TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
287 # code or not, which may be decided by options to the compiler later.
288 ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
289 GhcEnableTablesNextToCode=NO
291 GhcEnableTablesNextToCode=YES
295 # Building various ways?
296 # (right now, empty if not).
297 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
298 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
300 # Interface file version (hi-boot files only)
302 # A GHC built with HscIfaceFileVersion=n will look for
303 # M.hi-boot-n, and only then for
305 # (It'll be happy with the latter if the former doesn't exist.)
308 # This variable is used ONLY for hi-boot files. Its only purpose is
309 # to allow you to have a single directory with multiple .hi-boot files
310 # for the same module, each corresponding to a different version of
313 # HscIfaceFileVersion is propagated to hsc via
314 # compiler/main/Config.hs, which is automatically generated by
317 HscIfaceFileVersion=6
319 #------------------------------------------------------------------------------
320 # Options for Libraries
322 # What extra ways to build the libraries in
323 # In addition to the normal sequential way, the default is to also build
324 # profiled prelude libraries.
325 # When booting from .hc files, turn this off.
326 ifeq "$(BootingFromHc)" "YES"
332 # In addition, the RTS is built in some further variations. Ways that
336 # thr_p : threaded profiled
337 # debug : debugging (compile with -g for the C compiler, and -DDEBUG)
338 # debug_p : debugging profiled
339 # debug_u : debugging unregisterised
340 # thr_debug : debugging threaded
341 # thr_debug_p : debugging threaded profiled
342 # t : ticky-ticky profiling
343 # debug_t : debugging ticky-ticky profiling
345 ifeq "$(BootingFromHc)" "YES"
348 GhcRTSWays=thr thr_p debug thr_debug
351 # Option flags to pass to GHC when it's compiling modules in
352 # fptools/libraries. Typically these are things like -O or
353 # -dcore-lint or -H32m. The ones that are *essential* are wired into
356 # -O is pretty desirable, otherwise no inlining of prelude
357 # things (incl "+") happens when compiling with this compiler
359 # -fgenerics switches on generation of support code for
360 # derivable type classes. This is now off by default,
361 # but we switch it on for the libraries so that we generate
362 # the code in case someone importing wants it
364 GhcLibHcOpts=-O -Rghc-timing -fgenerics
366 # Win32 only: Enable the RTS and libraries to be built as DLLs
367 DLLized=@EnableWin32DLLs@
369 # Strip local symbols from libraries? This can make the libraries smaller,
370 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
374 # These are the URL patterns that Haddock uses to generate the "Source
375 # File" links on each page.
376 CorePackageSourceURL = http://darcs.haskell.org/ghc-6.6/packages/$(PACKAGE)/%{FILE}
377 ExtraPackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
379 # These are the packages required to be present in order to bootstrap GHC
380 # NB. must be synced with libraries/core-packages
381 CorePackages = base Cabal haskell98 readline regex-base regex-compat \
382 regex-posix parsec stm template-haskell unix Win32
384 # ----------------------------------------------------------------------------
385 # Object-file splitting
387 # Set SplitObjs=YES or NO in your build.mk
389 # Don't use -split-objs in in GhcLibHcOpts, because the build
390 # system needs to do other special magic if you are
391 # doing object-file splitting
392 ifneq "$(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)" ""
398 # Don't split object files for libs if we're building DLLs, or booting from
400 ifeq "$(DLLized)" "YES"
403 ifeq "$(BootingFromHc)" "YES"
406 ifeq "$(GhcUnregisterised)" "YES"
409 ifeq "$(TargetArch_CPP)" "ia64"
416 # Build the ObjectIO ?
418 GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
420 # .NET interop support?
422 DotnetSupport=@DotnetSupport@
424 # Build unix package?
426 GhcLibsWithUnix=@GhcLibsWithUnix@
428 # ----------------------------------------------------------------------------
429 # Options for GHC's RTS
431 # For an optimised RTS (you probably don't want to change these; we build
432 # a debugging RTS by default now. Use -debug to get it).
433 GhcRtsHcOpts=-optc-O2
434 GhcRtsCcOpts=-fomit-frame-pointer
436 # Include the front panel code? Needs GTK+.
437 GhcRtsWithFrontPanel = NO
439 # Include support for CPU performance counters via the PAPI library in the RTS?
440 # (PAPI: http://icl.cs.utk.edu/papi/)
442 HavePapi = @HavePapi@
444 ################################################################################
448 # nofib specific options
450 ################################################################################
452 WithNofibHc = $(GHC_INPLACE)
454 # NoFibSubDirs controls which set of tests should be run
455 # You can run one or more of
463 NoFibSubDirs = imaginary spectral real
465 # The different ways to build nofib. Default is just to mirror
466 # what is done for the ghc prelude libraries.
468 NoFibWays = $(GhcLibWays)
470 # Haskell compiler options for nofib
473 # Number of times to run each program
476 ################################################################################
478 # Paths (see paths.mk)
480 ################################################################################
482 # Directory used by GHC (and possibly other tools) for storing
483 # temporary files. If your TMPDIR isn't big enough, either override
484 # this in build.mk or set your environment variable "TMPDIR" to point
485 # to somewhere with more space. (TMPDIR=. is a good choice).
487 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
488 # override an environment variable with the value of the make variable
489 # of the same name (if it exists) when executing sub-processes, so
490 # setting the TMPDIR env var would have no effect in the build tree.
492 DEFAULT_TMPDIR = /tmp
493 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
494 DEFAULT_TMPDIR = /C/TEMP
496 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
497 DEFAULT_TMPDIR = /C/TEMP
500 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
501 FPTOOLS_TOP_ABS = @hardtop@
502 # The platform specific version of 'hardtop'.
503 FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
505 BIN_DIST_NAME=ghc-$(ProjectVersion)
506 BIN_DIST_TOPDIR=$(FPTOOLS_TOP_ABS)
507 BIN_DIST_DIR=$(BIN_DIST_TOPDIR)/$(BIN_DIST_NAME)
510 # Installation directories, we don't use half of these,
511 # but since the configure script has them on offer while
512 # passing through, we might as well set them.
515 datarootdir = @datarootdir@
516 exec_prefix = @exec_prefix@
520 includedir = @includedir@
521 oldincludedir = @oldincludedir@
524 ifeq "$(Windows)" "YES"
526 ifeq "$(strip $(prefix))" ""
530 # Hack: our directory layouts tend to be different on Windows, so
531 # hack around configure's bogus assumptions here.
538 # Unix: override libdir and datadir to put ghc-specific stuff in
539 # a subdirectory with the version number included.
541 libdir = $(libdir0)/ghc-$(ProjectVersion)
542 datadir = $(datadir0)/ghc-$(ProjectVersion)
546 # Default place for putting interface files is $(libdir)
547 # (overriden for packages in package.mk)
551 # Default values for most of the above are only set if
552 # they weren't configured to anything in particular
553 # via the configure script. (i.e., we make no assumption
554 # that the autoconf-generated script will assign defaults
555 # to all of the above).
557 ifeq "$(strip $(exec_prefix))" ""
558 exec_prefix = $(prefix)
560 ifeq "$(strip $(bindir))" ""
561 bindir = $(exec_prefix)/bin
565 # NOTE: by intention, libexecdir and libdir point to
567 # => Only way to override this is to set libexecdir= on the command line.
568 # (NOTE: configure script setting is ignored).
569 libexecdir = $(libdir)
571 ifeq "$(strip $(datadir))" ""
572 datadir = $(prefix)/share
574 ifeq "$(strip $(libdir))" ""
575 libdir = $(exec_prefix)/lib
577 ifeq "$(strip $(includedir))" ""
578 includedir = $(prefix)/include
580 ifeq "$(strip $(oldincludedir))" ""
581 oldincludedir = /usr/include
583 ifeq "$(strip $(mandir))" ""
584 mandir = $(prefix)/man
587 #-----------------------------------------------------------------------------
588 # install configuration
591 # Set this to have files installed with a specific owner
596 # Set this to have files installed with a specific group
601 # Invocations of `install' for the four different classes
604 INSTALL_PROGRAM = $(INSTALL) -m 755
605 INSTALL_SCRIPT = $(INSTALL) -m 755
606 INSTALL_SHLIB = $(INSTALL) -m 755
607 INSTALL_DATA = $(INSTALL) -m 644
608 INSTALL_MAN = $(INSTALL) -m 644
609 INSTALL_DIR = $(MKDIRHIER)
611 # -----------------------------------------------------------------------------
612 # Utilities programs: flags
614 # If you want to give any standard flags to pretty much any utility
615 # (see utils.mk for a complete list), by adding a line here
619 # where P is the utility. For example, to add -O to all Haskell
624 SRC_HC_OPTS += -H16m -O
626 # These flags make flex 8-bit
629 SRC_INSTALL_BIN_OPTS += -s
631 # lint gets all CPP's flags too
632 SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
633 WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
635 # Default fptools options for dllwrap.
636 SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
638 # Flags for CPP when running GreenCard on .pgc files
639 GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
642 ################################################################################
644 # Layout of the source tree
646 ################################################################################
648 # Here we provide defines for the various directories in the source tree,
649 # so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
650 # indicates a directory relative to the top of the source tree, whereas
651 # $(GHC_FOO_DIR) is a directory relative to the current directory.
652 # $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
654 GHC_UTILS_DIR_REL = utils
655 GHC_INCLUDE_DIR_REL = includes
656 GHC_COMPILER_DIR_REL = compiler
657 GHC_RTS_DIR_REL = rts
658 GHC_UTILS_DIR_REL = utils
659 GHC_DRIVER_DIR_REL = driver
660 GHC_COMPAT_DIR_REL = compat
662 GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
663 GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
664 GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
665 GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
666 GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
667 GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
668 GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
669 GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
670 GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
671 GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
672 GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
673 GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
674 GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
675 GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
677 GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
678 GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
679 GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
681 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
682 GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
683 GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
684 GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
685 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
686 GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
687 GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
689 GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
690 GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
691 GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
692 GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
693 GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
694 GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
695 GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
696 GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
697 GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
698 GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL)
699 GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
700 GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
701 GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
702 GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
704 GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
705 GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
706 GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
708 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
709 GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
710 GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
711 GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
712 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
713 GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
714 GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
716 GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
717 GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
718 GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
719 GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
720 GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
721 GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
722 GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
723 GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
724 GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
725 GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
726 GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
727 GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
728 GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
729 GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
731 GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
732 GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
733 GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
735 # -----------------------------------------------------------------------------
736 # Names of programs in the GHC tree
738 # xxx_PGM the name of an executable, without the path
739 # xxx the executable relative to the current dir
741 GHC_UNLIT_PGM = unlit$(exeext)
742 GHC_HP2PS_PGM = hp2ps
743 GHC_HSTAGS_PGM = hasktags
744 GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
745 GHC_TOUCHY_PGM = touchy$(exeext)
746 GHC_MANGLER_PGM = ghc-asm
747 GHC_SPLIT_PGM = ghc-split
748 GHC_SYSMAN_PGM = SysMan
749 GHC_PKG_INPLACE_PGM = ghc-pkg-inplace
750 GHC_GENPRIMOP_PGM = genprimopcode
751 GHC_GENAPPLY_PGM = genapply
752 GHC_MKDEPENDC_PGM = mkdependC
754 GHC_MKDIRHIER_PGM = mkdirhier
755 GHC_LNDIR_PGM = lndir
756 GHC_RUNTEST_PGM = runstdtest
758 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
766 UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
767 HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
768 HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
769 HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
770 MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
771 SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
772 SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
773 GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM)
774 GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
775 GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
776 MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
777 LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
778 MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
779 LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
780 RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
782 GENERATED_FILE = chmod a-w
784 #-----------------------------------------------------------------------------
785 # Haskell compilers and mkdependHS
787 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
788 # compilers, if available.
790 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
791 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
793 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
794 # (because the version numbers have to be calculated).
797 GhcDir = $(dir $(GHC))
799 # Set to YES if $(GHC) has the readline package installed
800 GhcHasReadline = @GhcHasReadline@
805 # Sometimes we want to invoke ghc from the build tree in different
806 # places (eg. it's handy to have a nofib & a ghc build in the same
807 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
809 GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace
810 GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace
811 GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace
812 GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace
814 ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
816 # We are using the stage1 compiler to compile Haskell code, set up
817 # some variables appropriately:
819 MKDEPENDHS =$(GHC_STAGE1)
820 GhcVersion = @ProjectVersion@
821 GhcPatchLevel = @ProjectPatchLevel@
822 # oops, these are wrong:
823 GhcMajVersion = @GhcMajVersion@
824 GhcMinVersion = @GhcMinVersion@
831 else # not UseStage1 or BootingFromHc
835 GhcVersion = @GhcVersion@
836 GhcPatchLevel = @GhcPatchLevel@
837 GhcMajVersion = @GhcMajVersion@
838 GhcMinVersion = @GhcMinVersion@
840 # Some useful GHC version predicates:
841 ghc_ge_601 = @ghc_ge_601@
842 ghc_ge_602 = @ghc_ge_602@
843 ghc_ge_603 = @ghc_ge_603@
844 ghc_ge_605 = @ghc_ge_605@
847 # Canonicalised ghc version number, used for easy (integer) version
848 # comparisons. We must expand $(GhcMinVersion) to two digits by
849 # adding a leading zero if necessary:
850 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
851 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
853 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
856 #-----------------------------------------------------------------------------
859 # NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
860 # the flag --with-gcc=<blah> instead. The reason is that the configure script
861 # needs to know which gcc you're using in order to perform its tests.
865 WhatGccIsCalled = @WhatGccIsCalled@
866 GccVersion = @GccVersion@
867 ifeq "$(strip $(HaveGcc))" "YES"
868 ifneq "$(strip $(UseGcc))" "YES"
871 CC = $(WhatGccIsCalled)
872 GccDir = $(dir $(WhatGccIsCalled))
876 # default C compiler flags
877 SRC_CC_OPTS = @SRC_CC_OPTS@
879 ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
883 #-----------------------------------------------------------------------------
884 # GMP Library (version 2.0.x or above)
886 HaveLibGmp = @HaveLibGmp@
889 GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
890 GMP_LIB_DIRS=@GMP_LIB_DIRS@
892 #-----------------------------------------------------------------------------
893 # GMP framework (Mac OS X)
895 HaveFrameworkGMP = @HaveFrameworkGMP@
897 #-----------------------------------------------------------------------------
900 HaveLibMingwEx = @HaveLibMingwEx@
902 #-----------------------------------------------------------------------------
903 # Flex (currently unused, could be moved to glafp-utils)
906 # Don't bother with -lfl, we define our own yywrap()s anyway.
908 #WAS:FLEX_LIB = @LEXLIB@
910 #-----------------------------------------------------------------------------
911 # Other standard (ha!) Unix utilities
914 ArSupportsInput = @ArSupportsInput@
915 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
916 BASH = /usr/local/bin/bash
918 CONTEXT_DIFF = @ContextDiffCmd@
920 CPP = @CPP@ @CPPFLAGS@
923 # RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
924 # behave plausibly on Haskell sources.
926 RAWCPP_FLAGS = -undef -traditional
931 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
932 # install-sh script (if chosen). This not terribly useful to us, so we convert
933 # it into an abs. path.
935 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
947 PREPROCESSCMD = $(CC) -E
955 # Some ld's support the -x flag and some don't, so the configure
956 # script detects which we have and sets LdXFlag to "-x" or ""
960 # GNU ld supports input via a linker script, which is useful to avoid
961 # overflowing command-line length limits.
962 LdIsGNULd = @LdIsGNULd@
965 # In emergency situations, REAL_SHELL is used to perform shell commands
966 # from within the ghc driver script, by scribbling the command line to
967 # a temp file and then having $(REAL_SHELL) execute it.
969 # The reason for having to do this is that overly long command lines
970 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
971 # 2.5.1), which is why this backdoor is provided. The situation of overly
972 # long command lines is either encountered while doing `make boot' in compiler/,
973 # or when linking the compiler binary (`hsc').
975 # We do not use SHELL to execute long commands, as `make' will more than likely
976 # override whatever setting you have in your environment while executing.
978 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
979 # as it is SHELL that will show up the bogosity in the first place, but setting
980 # it to anything else isn't really portable.
982 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
983 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
993 # This is special to literate/, ToDo: add literate-specific
994 # configure setup to literate/.
999 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
1007 GTK_CONFIG = @GTK_CONFIG@
1009 #-----------------------------------------------------------------------------
1012 XSLTPROC = @XsltprocCmd@
1013 XMLLINT = @XmllintCmd@
1015 XMLTEX = @XmltexCmd@
1016 PDFXMLTEX = @PdfxmltexCmd@
1019 DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
1021 XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
1022 --stringparam section.autolabel 1 \
1023 --stringparam section.label.includes.component.label 1
1025 #-----------------------------------------------------------------------------
1026 # FPtools support software
1031 # .NET support software
1039 GHC_PKG = @GhcPkgCmd@
1044 GREENCARD = @GreenCardCmd@
1045 GREENCARD_VERSION = @GreenCardVersion@
1051 HAPPY_VERSION = @HappyVersion@
1053 # Options to pass to Happy when we're going to compile the output with GHC
1055 GHC_HAPPY_OPTS = -agc
1057 # Temp. to work around performance problems in the HEAD around 8/12/2003,
1058 # A Happy compiled with this compiler needs more stack.
1059 SRC_HAPPY_OPTS = +RTS -K2m -RTS
1065 ALEX_VERSION = @AlexVersion@
1067 # Options to pass to Happy when we're going to compile the output with GHC
1074 HADDOCK = @HaddockCmd@
1077 # Options for compiling in different `ways'.
1079 # To configure up your own way, have a look at some of the standard ways
1080 # such as profiling, and create your own set of WAY_*_OPTS defs below.
1081 # After having done that, add your way string to WAYS, and after having
1082 # run the configure script, the different projects will add the new way
1083 # to the list of ways they support.
1087 # Definitions of the different ways:
1091 # - description, e.g., profiling
1092 # * what they mean to the driver:
1093 # - WAY_p_HC_OPTS gives the list of command-line options
1098 # The ways currently defined.
1100 ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
1101 USER_WAYS=a b c d e f g h j k l m n o A B
1104 # The following ways currently have treated specially, p u t mg,
1105 # as the driver script treats these guys specially and needs to carefully be told
1106 # about the options for these. Hence, we hide the required command line options
1107 # for these in the driver, as this is the only place they are needed.
1109 # If you want to add to these default options, fill in the variables below:
1113 WAY_i_HC_OPTS= -filx -fruntime-types
1116 WAY_p_NAME=profiling
1117 WAY_p_HC_OPTS= -prof
1120 WAY_t_NAME=ticky-ticky profiling
1121 WAY_t_HC_OPTS= -ticky
1124 WAY_u_NAME=unregisterized (using portable C only)
1125 WAY_u_HC_OPTS=-unreg
1128 WAY_mp_NAME=parallel
1129 WAY_mp_HC_OPTS=-parallel
1133 WAY_mg_HC_OPTS=-gransim
1136 # These ways apply to the RTS only:
1140 WAY_thr_NAME=threaded
1141 WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
1144 WAY_thr_p_NAME=threaded profiled
1145 WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
1148 WAY_debug_NAME=debug
1149 WAY_debug_HC_OPTS=-optc-DDEBUG
1152 WAY_debug_p_NAME=debug profiled
1153 WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
1156 WAY_debug_u_NAME=debug unregisterised
1157 WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
1160 WAY_debug_t_NAME=debug ticky-ticky profiling
1161 WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
1164 WAY_thr_debug_NAME=threaded
1165 WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
1167 # Way 'thr_debug_p':
1168 WAY_thr_debug_p_NAME=threaded
1169 WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
1172 # Add user-way configurations here:
1222 ################################################################################
1224 # 31-bit-Int Core files
1226 ################################################################################
1229 # It is possible to configure the compiler and prelude to support 31-bit
1230 # integers, suitable for a back-end and RTS using a tag bit on a 32-bit
1231 # architecture. Currently the only useful output from this option is external Core
1232 # files. The following additions to your build.mk will produce the
1233 # 31-bit core output. Note that this is *not* just a library "way"; the
1234 # compiler must be built a special way too.
1236 # GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
1237 # GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
1238 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
1241 ################################################################################
1243 # Library configure arguments
1245 ################################################################################
1247 CONFIGURE_ARGS = @CONFIGURE_ARGS@