4 #################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 #################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 #################################################################################
43 # Project-wide platform variables
45 #################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what. (cygwin32 only).
92 #################################################################################
96 # Set of options applicable to all fptools projects
98 #################################################################################
101 # What parts to build: An fptools build tree does not have to be built
102 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
103 # control which projects are built.
105 # Caution: the projects are built in the order given here, so if some
106 # projects use others you must list them in the correct order.
108 # Generally: * glafp-utils should be first
112 # then it's up to you
114 ProjectsToBuild = glafp-utils literate ghc hslibs
116 # Make a distinction between building and installing, ProjectsToInstall
117 # does not include the literate bits..
119 ProjectsToInstall = glafp-utils ghc hslibs
122 # Should the various project tests directories be built?
124 IncludeTestDirsInBuild=NO
127 # Name variables for the main project
130 ProjectName = $($(Project)ProjectName)
131 ProjectNameShort = $($(Project)ProjectNameShort)
132 ProjectVersion = $($(Project)ProjectVersion)
133 ProjectPatchLevel = $($(Project)ProjectPatchLevel)
135 #################################################################################
139 # Set of (configurable) options needed by the ghc tree
140 # plus their default options (if any).
142 #################################################################################
145 # Name variables for ghc:
147 GhcProjectName = The Glorious Glasgow Haskell Compilation System
148 GhcProjectNameShort = ghc
149 GhcProjectVersion = 2.10
150 GhcProjectPatchLevel = 0
152 #---------------------------------------------------------------
154 # Variables that control how the compiler itself is built
156 # Specify the Haskell compiler to be used to compile the compiler itself
158 # WithGhcHc Path name of the compiler to use
160 # Ghc2_0 Whether this compiler is GHC 2.0 or later
161 # (which affects gruesome details about
162 # how mutually recursive modules are handled)
164 # WithGhcHcType What "type" of compiler is being used
175 # WithGhcHcType=HC_GLASGOW_GHC
177 # Extra ways in which to build the compiler (for example, you might want to
178 # build a profiled compiler so you can see where it spends its time)
181 # Extra option flags to pass to the compiler that compiles the compiler
182 # (Ones that are essential are wired into ghc/compiler/Makefile)
184 # -H25m allocate a bigger heap (default is 6m)
186 # -O compile an optimised compiler
187 # NB! If you add -O you'll almost certainly need to increase
188 # the amount of heap space too (to 15m or more)
190 # -DDEBUG include consistency/assertion checks in the compiled compiler
192 # -dcore-lint check the types after every pass of the compiler;
193 # a pretty strong internal check
196 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
197 GhcWithHscBuiltViaC=NO
199 # Build hsc with -O and turn optimising flag on when compiling
200 # the intermediate C file
201 GhcUseGccForOptAsm=YES
203 # Compile intermediate C file with debugging options set.
204 GhcUseGccForDebuggingAsm=YES
206 # Build a registerised version of hsc and runtime
207 # (you'd be desperate or silly not to).
208 GhcWithRegisterised=YES
210 # Build a compiler with a native code generator backend
211 # (as well as a C backend)
213 # Target platforms supported:
214 # i386, alpha & sparc
215 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
218 # Building various ways?
219 # (right now, empty if not).
220 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
221 BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
222 BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
223 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
224 BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
226 #---------------------------------------------------------------
228 # Variables that control how the prelude libraries and runtime system are built
230 # What extra ways to build the libraries in
231 # In addition to the normal sequential way, the default is to also build
232 # profiled prelude libraries.
235 # Option flags to pass to GHC when it's compiling prelude modules
236 # Typically these are things like -O or -dcore-lint
237 # The ones that are *essential* are wired into ghc/lib/Makefile
239 # -O is pretty desirable, otherwise no inlining of prelude
240 # things (incl "+") happens when compiling with this compiler
243 # Splitting profiled code produces awfully large archives under ELF, so
244 # we turn it off here.
246 # ToDo: track down the source of this.
248 ifeq "$(strip $(way))" "p"
251 ifeq "$(strip $(way))" "mr"
254 GhcLibHcOpts= -O -split-objs -odir $*
258 # what to include in a binary distribution
261 GhcBinDistDirs = ghc hslibs
262 GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
263 GhcBinDistPrlScripts = ghc stat2resid hstags mkdependHS
264 GhcBinDistLibPrlScripts = hscpp
265 GhcBinDistBins = hp2ps
267 #################################################################################
271 # Set of (configurable) options needed by the Haskell libraries (hslibs)
272 # plus their default options (if any).
274 #################################################################################
276 # Build the Haskell Readline bindings?
278 HsLibsWithReadline=NO
280 # Include path to readline.h
281 # (no path == in standard include path)
285 # Build the socket libraries?
287 HsLibsWithSockets=YES
290 # The different ways to build hslibs. Default is just to mirror
291 # what is done for the ghc prelude libraries.
293 HsLibWays=$(GhcLibWays)
295 # Option flags for hslibs are by default the same as for the options
296 # used for the prelude libs (see above).
297 HsLibHcOpts=$(GhcLibHcOpts)
299 #################################################################################
303 # Happy specific options
305 #################################################################################
308 # Name variables for happy:
310 HappyProjectName = Happy
311 HappyProjectNameShort = happy
312 HappyProjectVersion = 1.5
313 HappyProjectPatchLevel = 0
315 # The compiler you'd like to use to compile Happy
316 WithHappyHc = $(WithGhcHc)
318 # HappyHcOpts gives the flags to pass to the Haskell compiler used
319 # to compile the Happy sources with.
323 # what to include in a binary distribution
326 HappyBinDistDirs = happy
327 HappyBinDistDocs = happy/doc
328 HappyBinDistShScripts = happy
330 #################################################################################
334 # Haggis specific options
336 #################################################################################
338 #################################################################################
342 # Green-card specific options
344 #################################################################################
347 #################################################################################
351 # nofib specific options
353 #################################################################################
356 # NoFibSubDirs controls which set of tests should be run
357 # You can run one or more of
366 NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
368 # The different ways to build nofib. Default is just to mirror
369 # what is done for the ghc prelude libraries.
371 NoFibWays=$(GhcLibWays)
373 # Haskell compiler options for nofib
376 # ==============================================================================
378 # END OF PROJECT-SPECIFIC STUFF
380 # Now come the generic configuration options
382 # ==============================================================================
384 #################################################################################
386 # Paths (see paths.mk)
388 #################################################################################
392 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
394 FPTOOLS_TOP_ABS = @hardtop@
397 # Installation directories, we don't use half of these,
398 # but since the configure script has them on offer while
399 # passing through, we might as well set them.
402 exec_prefix = @exec_prefix@
404 #UNUSED, see below: libexecdir = @libexecdir@
406 #sysconfdir = @datadir@
407 #sharedstatedir = @sharedstatedir@
408 #localstatedir = @localstatedir@
411 includedir = @includedir@
412 oldincludedir = @oldincludedir@
414 #UNUSED:srcdir = @srcdir@
417 # Default values for most of the above are only set if
418 # they weren't configured to anything in particular
419 # via the configure script. (i.e., we make no assumption
420 # that the autoconf-generated script will assign defaults
421 # to all of the above).
423 ifeq "$(strip $(exec_prefix))" ""
424 exec_prefix = $(prefix)
426 ifeq "$(strip $(bindir))" ""
427 bindir = $(exec_prefix)/bin
431 # NOTE: by intention, libexecdir and libdir point to
433 # => Only way to override this is to set libexecdir= on the command line.
434 # (NOTE: configure script setting is ignored).
435 libexecdir = $(libdir)
437 ifeq "$(strip $(datadir))" ""
438 datadir = $(prefix)/share
440 ifeq "$(strip $(libdir))" ""
441 libdir = $(exec_prefix)/lib
443 ifeq "$(strip $(infodir))" ""
444 infodir = $(prefix)/info
446 ifeq "$(strip $(includedir))" ""
447 includedir = $(prefix)/include
449 ifeq "$(strip $(oldincludedir))" ""
450 oldincludedir = /usr/include
452 ifeq "$(strip $(mandir))" ""
453 mandir = $(prefix)/man
457 #################################################################################
459 # Utilities programs: flags
461 #################################################################################
463 # If you want to give any standard flags to pretty much any utility
464 # (see utils.mk for a complete list), by adding a line here
468 # where P is the utility. For example, to add -O to all Haskell
474 #################################################################################
476 # Utilities programs: where to find them
478 #################################################################################
480 #-----------------------------------------------------------------------------
481 # FPtools Utility locations
483 # By default, the various utils needed to be build ghc and chums
484 # is set up to point to the utils/ directory. Define here the
485 # path prefix for the utilities. Notice that it's a prefix with
486 # a trailing slash, so that it can be concatenated directly on
487 # front of a program name; if it's not set then we just look
488 # along the shell's $(PATH)
490 # If instead you want to use installed or your own versions of these,
491 # override the various *_PREFIX in build.mk, i.e., having the following
496 # will force `make' to rummage around in your PATH to find `fastmake' (not
497 # sure it would need it in the first place, but still).
499 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
501 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
502 FASTMAKE_PREFIX = $(GLAFP_UTILS)/fastmake/
503 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
504 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
505 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
506 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
507 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
508 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
509 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
510 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
511 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
514 LITERATE = $(FPTOOLS_TOP)/literate
516 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
517 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
518 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
520 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
521 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
523 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
524 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
525 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
526 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
527 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
528 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
531 #-----------------------------------------------------------------------------
532 # Haskell compiler and mkdependHS
534 HC = $(FPTOOLS_TOP)/ghc/driver/ghc
538 # The compiler proper is built with the 1.2 compiler,
539 # so when building the dependencies, we need mkdependHS
540 # for the 1.2 compiler.
542 MKDEPENDHS_1_2 = mkdependHS-1.2
544 #-----------------------------------------------------------------------------
550 WhatGccIsCalled = gcc
551 ifeq "$(strip $(HaveGcc))" "YES"
552 ifneq "$(strip $(UseGcc))" "YES"
555 CC = $(WhatGccIsCalled)
559 #-----------------------------------------------------------------------------
565 #-----------------------------------------------------------------------------
566 # Other standard (ha!) Unix utilities
569 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
570 BASH = /usr/local/bin/bash
572 # Could be either gzip or compress
574 COMPRESS = @CompressCmd@
575 COMPRESS_SUFFIX = @CompressSuffix@
577 CONTEXT_DIFF = @ContextDiffCmd@
585 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
586 # install-sh script (if chosen). This not terribly useful to us, so we convert
587 # it into an abs. path.
589 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
598 PREPROCESSCMD = $(CC) -E
605 # In emergency situations, REAL_SHELL is used to perform shell commands
606 # from within the ghc driver script, by scribbling the command line to
607 # a temp file and then having $(REAL_SHELL) execute it.
609 # The reason for having to do this is that overly long command lines
610 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
611 # 2.5.1), which is why this backdoor is provided. The situation of overly
612 # long command lines is either encountered while doing `make boot' in ghc/compiler,
613 # or when linking the compiler binary (`hsc').
615 # We do not use SHELL to execute long commands, as `make' will more than likely
616 # override whatever setting you have in your environment while executing.
618 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
619 # as it SHELL that will show up the bogosity in the first place, but setting
620 # it to anything else isn't really portable.
622 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
623 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
632 # Under cygwin32, we have to deal with .exe suffixes
634 EXE_SUFFIX=@ExeSuffix@
637 # This is special to literate/, ToDo: add literate-specific
638 # configure setup to literate/.
643 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
651 #-----------------------------------------------------------------------------
652 # SGML stuff (currently not configured - we assume you have it)
654 SGML2LATEX = sgml2latex
655 SGML2HTML = sgml2html
656 SGML2INFO = sgml2info
659 #-----------------------------------------------------------------------------
660 # FPtools support software
662 # Stuff from fptools/glafp-utils
663 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
664 FASTMAKE = $(FASTMAKE_PREFIX)fastmake
665 LTX = $(LTX_PREFIX)ltx
666 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
667 LNDIR = $(LNDIR_PREFIX)lndir
668 MSUB = $(MSUB_PREFIX)msub
669 ETAGS = $(ETAGS_PREFIX)etags
670 VERBATIM = $(VERBATIM_PREFIX)verbatim
671 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
672 SGML2LATEX = sgml2latex
673 RUNTEST = $(RUNTEST_PREFIX)runstdtest
675 HAPPY_VERSION = @HappyVersion@
677 GREENCARD = @GreencardCmd@
680 # Stuff from fptools/literate
682 INFO = $(UTIL_PREFIX)info
683 MAKEINFO = $(INFO_PREFIX)makeinfo
684 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
685 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
686 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
687 LIT2HTML = $(LITERATE_PREFIX)lit2html
688 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
689 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
690 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
691 LIT2TEXT = $(LITERATE_PREFIX)lit2text
692 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
695 # Stuff from fptools/ghc/utils
697 UNLIT = $(UNLIT_PREFIX)unlit
698 UGEN = $(UGEN_PREFIX)ugen
699 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
700 HP2PS = $(HP2PS_PREFIX)hp2ps
701 HSCPP = $(HSCPP_PREFIX)hscpp
702 HSTAGS = $(HSTAGS_PREFIX)hstags
705 # Options for the compiling different `ways'. Various projects within
706 # the glorious fptools tree support building in various user-configured
707 # ways. For instance, you could set up one `way' such that the prelude
708 # libraries and hslibs all were built with the option -ffoldr-build-on.
710 # To configure up your own way, have a look at some of the standard ways
711 # such as profiling, and create your own set of WAY_*_OPTS defs below.
712 # After having done that, add your way string to WAYS, and after having
713 # run the configure script, the different projects will add the new way
714 # to the list of ways they support.
718 # IMPORTANT! The WAYS variable configures the different `ways'
719 # you want to build a project (or maybe just parts of it, as is
720 # the case for ghc/). This variable is intended set inside the
721 # project mk setup, enforcing a global fptools WAYS is a bit too
722 # much (do you *really* want to build glafp-utils the profiled-concurrent
727 # Definitions of the different ways:
731 # - description, e.g., profiling
732 # * what they mean to the driver:
733 # - WAY_p_HC_OPTS gives the list of command-line options
738 # The ways currently defined.
740 ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
743 # The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
744 # as the driver script treats these guys specially and needs to carefully be told
745 # about the options for these. Hence, we hide the required command line options
746 # for these in the ghc/driver, as this is the only place they are needed.
748 # If you want to add to these default options, fill in the variables below:
754 WAY_t_NAME=ticky-ticky profiling
755 WAY_t_HC_OPTS= -ticky
758 WAY_u_NAME=unregisterized (using portable C only)
761 # Way `mc': concurrent
762 WAY_mc_NAME=concurrent
763 WAY_mc_HC_OPTS=-concurrent
766 WAY_mr_NAME=profiled concurrent
767 WAY_mr_HC_OPTS=-prof -concurrent
770 WAY_mt_NAME=ticky-ticky concurrent
771 WAY_mt_HC_OPTS=-ticky -concurrent
775 WAY_mp_HC_OPTS=-parallel
781 WAY_mg_HC_OPTS=-gransim
784 # Ways for different garbage collectors
786 WAY_2s_NAME=2-space GC
789 WAY_1s_NAME=1-space GC
792 WAY_du_NAME=dual-mode GC
796 # Add user-way configurations here: