4 ################################################################################
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
12 # DO NOT EDIT THIS FILE!
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # This may be triggered automatically by the build system (say
16 # if config.mk.in has changed more recently than config.mk),
17 # so if you edit config.mk your changes will be spammed.
19 # - Settings in this file may be overriden by giving replacement
20 # definitions in build.mk. See build.mk.sample for a good
21 # starting point for a build.mk file.
23 # If you don't have a build.mk file then you get defaults for everything.
24 # The defaults should provide a reasonable vanilla build.
26 # This is one of only two files that configure generates (the other is config.h)
29 ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
30 ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
31 $(error GNU make version 3.79.1 or later is required.)
35 ################################################################################
40 # ProjectVersion is treated as a *string*
41 # ProjectVersionInt is treated as an *integer* (for cpp defines)
43 # Versioning scheme: A.B.C
44 # A: major version, decimal, any number of digits
45 # B: minor version, decimal, any number of digits
46 # C: patchlevel, one digit, omitted if zero.
48 # ProjectVersionInt does *not* contain the patchlevel (rationale: this
49 # figure is used for conditional compilations, and library interfaces
50 # etc. are not supposed to change between patchlevels).
52 # The ProjectVersionInt is included in interface files, and GHC
53 # checks that it's reading interface generated by the same ProjectVersion
54 # as itself. It does this even though interface file syntax may not
55 # change between versions. Rationale: calling conventions or other
56 # random .o-file stuff might change even if the .hi syntax doesn't
58 ProjectName = @ProjectName@
60 ProjectVersion = @ProjectVersion@$(ProjectTags)
61 ProjectVersionInt = @ProjectVersionInt@
62 ProjectPatchLevel = @ProjectPatchLevel@
64 ################################################################################
68 ################################################################################
70 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
71 # specifier. E.g. sparc-sun-solaris2
73 # Build platform: the platform on which we are doing this build
74 # Host platform: the platform on which these binaries will run
75 # Target platform: the platform for which this compiler will generate code
77 # We don't support build & host being different, because the build
78 # process creates binaries that are run during the build, and also
81 # If host & target are different, then we are building a compiler
82 # which will generate intermediate .hc files to port to the target
83 # architecture for bootstrapping. The libraries and stage 2 compiler
84 # will be built as HC files for the target system, and likely won't
85 # build on this host platform.
87 # An important invariant is that for any piece of source code, the
88 # platform on which the code is going to run is the HOST platform,
89 # and the platform on which we are building is the BUILD platform.
90 # Additionally for the compiler, the platform this compiler will
91 # generate code for is the TARGET. TARGET is not meaningful outside
92 # the compiler sources.
94 # Guidelines for when to use HOST vs. TARGET:
96 # - In the build system (Makefile, foo.mk), normally we should test
97 # $(HOSTPLATFORM). There are some cases (eg. installation), where
98 # we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
99 # doesn't matter which is used.
101 # - In the compiler itself, we should test HOST or TARGET depending
102 # on whether the conditional relates to the code being generated, or
103 # the platform on which the compiler is running. See the section
104 # on "Coding Style" in the commentary for more details.
106 # - In all other code, we should be testing HOST only.
108 # NOTE: cross-compiling is not well supported by the build system.
109 # You have to do a lot of work by hand to cross compile: see the
110 # section on "Porting GHC" in the Building Guide.
112 HOSTPLATFORM = @HostPlatform@
113 TARGETPLATFORM = @TargetPlatform@
114 BUILDPLATFORM = @BuildPlatform@
117 # in one or two places, we need to get at the OS version (major and
118 # perhaps even minor), HostOS_Full is the OS name reported by
119 # AC_CANONICAL_SYSTEM.
121 HostPlatform_CPP = @HostPlatform_CPP@
122 HostArch_CPP = @HostArch_CPP@
123 HostOS_CPP = @HostOS_CPP@
124 HostOS_Full = @HostOS_Full@
125 HostVendor_CPP = @HostVendor_CPP@
127 TargetPlatform_CPP = @TargetPlatform_CPP@
128 TargetArch_CPP = @TargetArch_CPP@
129 TargetOS_CPP = @TargetOS_CPP@
130 TargetVendor_CPP = @TargetVendor_CPP@
132 BuildPlatform_CPP = @BuildPlatform_CPP@
133 BuildArch_CPP = @BuildArch_CPP@
134 BuildOS_CPP = @BuildOS_CPP@
135 BuildVendor_CPP = @BuildVendor_CPP@
137 @HostPlatform_CPP@_HOST = 1
138 @TargetPlatform_CPP@_TARGET = 1
139 @BuildPlatform_CPP@_BUILD = 1
141 @HostArch_CPP@_HOST_ARCH = 1
142 @TargetArch_CPP@_TARGET_ARCH = 1
143 @BuildArch_CPP@_BUILD_ARCH = 1
145 @HostOS_CPP@_HOST_OS = 1
146 @TargetOS_CPP@_TARGET_OS = 1
147 @BuildOS_CPP@_BUILD_OS = 1
149 @HostVendor_CPP@_HOST_VENDOR = 1
150 @TargetVendor_CPP@_TARGET_VENDOR = 1
151 @BuildVendor_CPP@_BUILD_VENDOR = 1
153 ################################################################################
155 # Global configuration options
157 ################################################################################
159 # Leading underscores on symbol names in object files
160 # Valid options: YES/NO
162 LeadingUnderscore=@LeadingUnderscore@
164 # Pin a suffix on executables? If so, what (Windows only).
168 # Windows=YES if on a Windows platform
169 ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
175 # BootingFromHc - build GHC and the libraries from .hc files?
176 BootingFromHc = @BootingFromHc@
178 # BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
179 # rather than registerised code, i.e., disable the mangler?
180 BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
183 # Which ways should DocBook XML documents be built?
184 # options are: dvi ps pdf html chm HxS
188 # Should we build latex docs?
191 # Mac OS X deployment target (to cross-compile for older OS versions)
193 MACOSX_DEPLOYMENT_VERSION = @MACOSX_DEPLOYMENT_VERSION@
194 MACOSX_DEPLOYMENT_SDK = @MACOSX_DEPLOYMENT_SDK@
196 ifneq "$(MACOSX_DEPLOYMENT_VERSION)" ""
197 MACOSX_DEPLOYMENT_CC_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
198 -isysroot $(MACOSX_DEPLOYMENT_SDK) \
200 MACOSX_DEPLOYMENT_LD_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
201 -Wl,-syslibroot,$(MACOSX_DEPLOYMENT_SDK)
202 # We don't extend SRC_CC_OPTS and friends here directly, as (a) they may get
203 # overwritten in build.mk and (b) we must not use the deployment options in
204 # stage 1 or we get a linker error if the bootstrap compiler is for a more
207 # We need --no-builtin-fprintf, as the use of the builtin function optimisation
208 # for fprintf together with #include "PosixSource" in the RTS leads to the
209 # use of fwrite$UNIX2003 (with GCC 4.0.1 on Mac OS X 10.5.2).
212 ################################################################################
214 # Variables that control how the compiler itself is built
216 ################################################################################
218 # The compiler used to build GHC is $(GHC). To change the actual compiler
219 # used, re-configure with --with-ghc=<path-to-ghc>.
221 # Extra ways in which to build the compiler (for example, you might want to
222 # build a profiled compiler so you can see where it spends its time)
225 # Extra option flags to pass to the compiler that compiles the compiler
226 # (Ones that are essential are wired into compiler/Makefile)
227 # Typical options to use here:
229 # -DDEBUG include debugging code and assertions (will make the
230 # compiler slower and produce debugging output, but useful
233 # -dcore-lint check the types after every pass of the compiler;
234 # a pretty strong internal check of the compiler being
235 # used to compile GHC. Useful when bootstrapping.
236 GhcHcOpts=-Rghc-timing
238 # Extra options added to specific stages of the compiler bootstrap.
239 # These are placed later on the command line, and may therefore
240 # override options from $(GhcHcOpts).
247 GhcLibProfiled=$(if $(filter p,$(GhcLibWays)),YES,NO)
249 # Build shared and/or static libs?
250 BuildSharedLibs=@BuildSharedLibs@
252 # BuildStaticLibs=@BuildStaticLibs@
254 # Build a compiler that will build *unregisterised* libraries and
255 # binaries by default. Unregisterised code is supposed to compile and
256 # run without any support for architecture-specific assembly mangling,
257 # register assignment or tail-calls, and is therefore a good way to get
258 # started when porting GHC to new architectures.
260 # If this is set to NO, you can still use the unregisterised way
261 # (way 'u') to get unregisterised code, but the default way will be
264 # NOTE: the stage1 compiler will be a registerised binary (assuming
265 # the compiler you build with is generating registerised binaries), but
266 # the stage2 compiler will be an unregisterised binary.
268 ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
269 GhcUnregisterised=YES
274 # Build a compiler with a native code generator backend
275 # (as well as a C backend)
277 # Target platforms supported:
279 # AIX is not supported
280 ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc)))
281 OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
283 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
284 GhcWithNativeCodeGen=$(strip\
285 $(if $(filter YESYESNO,\
286 $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
288 HaveLibDL = @HaveLibDL@
290 # ArchSupportsSMP should be set iff there is support for that arch in
292 ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
294 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
295 GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
297 # Whether to include GHCi in the compiler. Depends on whether the RTS linker
298 # has support for this OS/ARCH combination.
300 OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
301 ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
303 ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
304 GhcWithInterpreter=YES
306 GhcWithInterpreter=NO
309 # GhcEnableTablesNextToCode tells us whether the target architecture
310 # supports placing info tables directly before the entry code
311 # (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
312 # TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
313 # code or not, which may be decided by options to the compiler later.
314 ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
315 GhcEnableTablesNextToCode=NO
317 GhcEnableTablesNextToCode=YES
320 # On Windows we normally want to make a relocatable bindist, to we
321 # ignore flags like libdir
322 ifeq "$(Windows)" "YES"
323 RelocatableBuild = YES
325 RelocatableBuild = NO
328 # When building bindists we set this to yes so that the binaries are as
329 # portable as possible.
333 # Building various ways?
334 # (right now, empty if not).
335 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
336 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
338 # Interface file version (hi-boot files only)
340 # A GHC built with HscIfaceFileVersion=n will look for
341 # M.hi-boot-n, and only then for
343 # (It'll be happy with the latter if the former doesn't exist.)
346 # This variable is used ONLY for hi-boot files. Its only purpose is
347 # to allow you to have a single directory with multiple .hi-boot files
348 # for the same module, each corresponding to a different version of
351 # HscIfaceFileVersion is propagated to hsc via
352 # compiler/main/Config.hs, which is automatically generated by
355 HscIfaceFileVersion=6
357 #------------------------------------------------------------------------------
358 # Options for Libraries
360 # Which directory (in libraries/) contains the integer library?
361 INTEGER_LIBRARY=integer-gmp
363 # What extra ways to build the libraries in
364 # In addition to the normal sequential way, the default is to also build
365 # profiled prelude libraries.
366 # When booting from .hc files, turn this off.
367 ifeq "$(BootingFromHc)" "YES"
373 ifeq "$(BuildSharedLibs)" "YES"
377 # In addition, the RTS is built in some further variations. Ways that
381 # thr_p : threaded profiled
382 # debug : debugging (compile with -g for the C compiler, and -DDEBUG)
383 # debug_p : debugging profiled
384 # thr_debug : debugging threaded
385 # thr_debug_p : debugging threaded profiled
386 # t : ticky-ticky profiling
387 # debug_t : debugging ticky-ticky profiling
391 # Usually want the debug version
392 ifeq "$(BootingFromHc)" "NO"
396 ifeq "$(BuildSharedLibs)" "YES"
397 GhcRTSWays += dyn debug_dyn thr_dyn thr_debug_dyn
400 # Want the threaded versions unless we're unregisterised
401 # Defer the check until later by using $(if..), because GhcUnregisterised might
402 # be set in build.mk, which hasn't been read yet.
403 GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_p thr_debug,)
405 # We can only build GHCi threaded if we have a threaded RTS:
406 GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
408 # Option flags to pass to GHC when it's compiling modules in
409 # fptools/libraries. Typically these are things like -O or
410 # -dcore-lint or -H32m. The ones that are *essential* are wired into
413 # -O(2) is pretty desirable, otherwise no inlining of prelude
414 # things (incl "+") happens when compiling with this compiler
416 # -XGenerics switches on generation of support code for
417 # derivable type classes. This is now off by default,
418 # but we switch it on for the libraries so that we generate
419 # the code in case someone importing wants it
421 GhcLibHcOpts=-O2 -Rghc-timing -XGenerics
423 # Win32 only: Enable the RTS and libraries to be built as DLLs
424 DLLized=@EnableWin32DLLs@
426 # Strip local symbols from libraries? This can make the libraries smaller,
427 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
431 # These are the URL patterns that Haddock uses to generate the "Source
432 # File" links on each page.
433 PackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
435 # ----------------------------------------------------------------------------
436 # Object-file splitting
438 # Set SplitObjs=YES or NO in your build.mk
440 # Don't use -split-objs in in GhcLibHcOpts, because the build
441 # system needs to do other special magic if you are
442 # doing object-file splitting
444 # lazy test, so that $(GhcUnregisterised) can be set in build.mk
445 SplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),\
446 $(if $(filter YES,$(BootingFromHC)),\
448 $(if $(filter NO,$(GhcUnregisterised)),\
456 # .NET interop support?
460 # Build unix package?
462 GhcLibsWithUnix=@GhcLibsWithUnix@
464 # ----------------------------------------------------------------------------
465 # Options for GHC's RTS
467 # For an optimised RTS (you probably don't want to change these; we build
468 # a debugging RTS by default now. Use -debug to get it).
469 GhcRtsHcOpts=-optc-O2
470 GhcRtsCcOpts=-fomit-frame-pointer
472 # Include the front panel code? Needs GTK+.
473 GhcRtsWithFrontPanel = NO
475 # Include support for CPU performance counters via the PAPI library in the RTS?
476 # (PAPI: http://icl.cs.utk.edu/papi/)
481 ################################################################################
485 # nofib specific options
487 ################################################################################
489 WithNofibHc = $(GHC_INPLACE)
491 # NoFibSubDirs controls which set of tests should be run
492 # You can run one or more of
500 NoFibSubDirs = imaginary spectral real
502 # The different ways to build nofib. Default is just to mirror
503 # what is done for the ghc prelude libraries.
505 NoFibWays = $(GhcLibWays)
507 # Haskell compiler options for nofib
510 # Number of times to run each program
513 ################################################################################
515 # Paths (see paths.mk)
517 ################################################################################
519 # Directory used by GHC (and possibly other tools) for storing
520 # temporary files. If your TMPDIR isn't big enough, either override
521 # this in build.mk or set your environment variable "TMPDIR" to point
522 # to somewhere with more space. (TMPDIR=. is a good choice).
524 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
525 # override an environment variable with the value of the make variable
526 # of the same name (if it exists) when executing sub-processes, so
527 # setting the TMPDIR env var would have no effect in the build tree.
529 DEFAULT_TMPDIR = /tmp
530 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
531 DEFAULT_TMPDIR = /C/TEMP
533 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
534 DEFAULT_TMPDIR = /C/TEMP
537 # FPTOOLS_TOP_ABS: the top of the fptools hierarchy, absolute path.
538 # On Windows this is a c:/foo/bar style path.
539 FPTOOLS_TOP_ABS = @hardtop@
541 BIN_DIST_TOPDIR_ABS=$(FPTOOLS_TOP_ABS)
542 BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
544 BIN_DIST_NAME=ghc-$(ProjectVersion)
545 BIN_DIST_TAR=$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar
546 BIN_DIST_TAR_BZ2=$(BIN_DIST_TAR).bz2
547 BIN_DIST_PREP_DIR=$(FPTOOLS_TOP_ABS)/bindist-prep
548 BIN_DIST_PREP=$(BIN_DIST_PREP_DIR)/$(BIN_DIST_NAME)
549 BIN_DIST_LIST=$(FPTOOLS_TOP_ABS)/bindist-list
551 # Definition of installation directories, we don't use half of these, but since
552 # the configure script has them on offer while passing through, we might as well
553 # set them. Note that we have to be careful, because the GNU coding standards
554 # have changed a bit over the course of time, and autoconf development reflects
557 # A little bit of history regarding autoconf and GNU coding standards, use this
558 # as a cheat-sheet for the stuff below:
560 # variable | default < 2.60 | default >= 2.60
561 # ------------+--------------------+--------------------------------------
562 # exec_prefix | ${prefix} | ${prefix}
563 # libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
564 # datarootdir | NONE! | ${prefix}/share
565 # datadir | ${prefix}/share | ${datarootdir}
566 # infodir | ${prefix}/info | ${datarootdir}/info
567 # mandir | ${prefix}/man | ${datarootdir}/man
568 # docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
569 # htmldir | NONE! | ${docdir}
570 # dvidir | NONE! | ${docdir}
571 # pdfdir | NONE! | ${docdir}
572 # psdir | NONE! | ${docdir}
574 # NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
575 # string "${docdir}", not the value of docdir! This is crucial for the GNU
578 # This gets used in the default docdir when autoconf >= 2.60 is used
579 PACKAGE_TARNAME := @PACKAGE_TARNAME@
583 # New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
584 # However, in order to support older autoconf's we don't use it.
585 # datarootdir is set lower down instead.
586 # But, as datadir is defined in terms of datarootdir, we also need to
587 # set it to the value (if any) that configure gives it here.
588 datarootdir := @datarootdir@
590 exec_prefix := @exec_prefix@
592 datadir0 := @datadir@
594 includedir := @includedir@
596 dynlibdir := @libdir@
598 ifeq "$(RelocatableBuild)" "YES"
600 # Hack: our directory layouts tend to be different on Windows, so
601 # hack around configure's bogus assumptions here.
602 datarootdir := $(prefix)
606 docdir := $(prefix)/doc
614 # Unix: override libdir and datadir to put ghc-specific stuff in
615 # a subdirectory with the version number included.
617 # datadir is set to libdir here as GHC needs package.conf and unlit
618 # to be in the same place (and things like ghc-pkg need to agree on
619 # where package.conf is, so we just set it globally).
621 datarootdir := $(datadir0)
622 libdir := $(libdir0)/ghc-$(ProjectVersion)
625 # New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
626 # However, in order to support older autoconf's we don't use them.
629 #htmldir := @htmldir@
634 docdir := $(datarootdir)/doc/ghc
642 headerdir := $(libdir)/include
644 # Default place for putting interface files is $(libdir)
645 # (overriden for packages in package.mk)
648 # NOTE: by intention, libexecdir and libdir point to
650 # => Only way to override this is to set libexecdir= on the command line.
651 # (NOTE: configure script setting is ignored).
652 libexecdir = $(libdir)
654 GHC_PKG_PROG = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)/install-inplace/bin/ghc-pkg
656 #-----------------------------------------------------------------------------
657 # install configuration
660 # Set this to have files installed with a specific owner
665 # Set this to have files installed with a specific group
670 # Invocations of `install' for the four different classes
673 INSTALL_PROGRAM = $(INSTALL) -m 755
674 INSTALL_SCRIPT = $(INSTALL) -m 755
675 INSTALL_SHLIB = $(INSTALL) -m 755
676 INSTALL_DATA = $(INSTALL) -m 644
677 INSTALL_HEADER = $(INSTALL) -m 644
678 INSTALL_MAN = $(INSTALL) -m 644
679 INSTALL_DIR = $(MKDIRHIER)
682 # runhaskell and hsc2hs are special, in that other compilers besides
683 # GHC might provide them. Systems with a package manager often come
684 # with tools to manage this kind of clash, e.g. RPM's
685 # update-alternatives. When building a distribution for such a system,
686 # we recommend setting both of the following to 'YES'.
688 # NO_INSTALL_RUNHASKELL = YES
689 # NO_INSTALL_HSC2HS = YES
691 # NB. we use negative tests here because for binary-distributions we cannot
692 # test build-time variables at install-time, so they must default to on.
694 # -----------------------------------------------------------------------------
695 # Utilities programs: flags
697 # If you want to give any standard flags to pretty much any utility
698 # (see utils.mk for a complete list), by adding a line here
702 # where P is the utility. For example, to add -O to all Haskell
707 SRC_HC_OPTS += -H32m -O
709 # These flags make flex 8-bit
712 # lint gets all CPP's flags too
713 SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
714 WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
716 # Default fptools options for dllwrap.
717 SRC_BLD_DLL_OPTS += --target=i386-mingw32
719 # Flags for CPP when running GreenCard on .pgc files
720 GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
723 ################################################################################
725 # Layout of the source tree
727 ################################################################################
729 # Here we provide defines for the various directories in the source tree,
730 # so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
731 # indicates a directory relative to the top of the source tree, whereas
732 # $(GHC_FOO_DIR) is a directory relative to the current directory.
733 # $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
735 GHC_UTILS_DIR_REL = utils
736 GHC_INCLUDE_DIR_REL = includes
737 GHC_COMPILER_DIR_REL = ghc
738 GHC_RTS_DIR_REL = rts
739 GHC_UTILS_DIR_REL = utils
740 GHC_DRIVER_DIR_REL = driver
741 GHC_COMPAT_DIR_REL = compat
743 GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
744 GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
745 GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
746 GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
747 GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
748 GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
749 GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
750 GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
751 GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
752 GHC_GHCTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/ghctags
753 GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
754 GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
755 GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
756 GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
757 GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
759 GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
760 GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
761 GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
763 INPLACE_DATA_DIR = $(FPTOOLS_TOP_ABS)/inplace-datadir
765 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
766 GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
767 GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
768 GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
769 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
770 GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
771 GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
773 GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
774 GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
775 GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
776 GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
777 GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
778 GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
779 GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
780 GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
781 GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
782 GHC_GHCTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_GHCTAGS_DIR_REL)
783 GHC_HSC2HS_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
784 GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
785 GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
786 GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
787 GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
789 GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
790 GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
791 GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
793 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
794 GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
795 GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
796 GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
797 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
798 GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
799 GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
801 GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
802 GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
803 GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
804 GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
805 GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
806 GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
807 GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
808 GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
809 GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
810 GHC_GHCTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GHCTAGS_DIR_REL)
811 GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
812 GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
813 GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
814 GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
815 GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
816 GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
818 GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
819 GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
820 GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
822 # -----------------------------------------------------------------------------
823 # Names of programs in the GHC tree
825 # xxx_PGM the name of an executable, without the path
826 # xxx the executable relative to the current dir
828 GHC_UNLIT_PGM = unlit$(exeext)
829 GHC_HP2PS_PGM = hp2ps
830 GHC_HSTAGS_PGM = hasktags
831 GHC_GHCTAGS_INPLACE_PGM = ghctags-inplace
832 GHC_HSC2HS_INPLACE_PGM = hsc2hs
833 GHC_TOUCHY_PGM = touchy$(exeext)
834 GHC_MANGLER_PGM = ghc-asm
835 GHC_SPLIT_PGM = ghc-split
836 GHC_SYSMAN_PGM = SysMan
837 GHC_GENPRIMOP_PGM = genprimopcode
838 GHC_GENAPPLY_PGM = genapply
839 GHC_MKDEPENDC_PGM = mkdependC
841 GHC_MKDIRHIER_PGM = mkdirhier
842 GHC_LNDIR_PGM = lndir
843 GHC_RUNTEST_PGM = runstdtest
845 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
853 UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
854 HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
855 HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
856 GHCTAGS_INPLACE = $(GHC_GHCTAGS_DIR)/$(GHC_GHCTAGS_INPLACE_PGM)
857 HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/install-inplace/bin/$(GHC_HSC2HS_INPLACE_PGM)
858 MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
859 SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
860 SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
861 GHC_PKG_INPLACE = $(GHC_PKG_PROG)
862 GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
863 GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
864 MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
865 LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
866 MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
867 LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
868 RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
870 GENERATED_FILE = chmod a-w
871 EXECUTABLE_FILE = chmod +x
873 #-----------------------------------------------------------------------------
874 # Haskell compilers and mkdependHS
876 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
877 # compilers, if available.
879 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
880 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
882 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
883 # (because the version numbers have to be calculated).
886 GhcDir = $(dir $(GHC))
888 # Set to YES if $(GHC) has the editline package installed
889 GhcHasEditline = @GhcHasEditline@
894 # Sometimes we want to invoke ghc from the build tree in different
895 # places (eg. it's handy to have a nofib & a ghc build in the same
896 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
898 GHC_INPLACE = $(GHC_STAGE1)
899 GHC_STAGE1 = $(GHC_COMPILER_DIR_ABS)/stage1-inplace/ghc
900 GHC_STAGE2 = $(GHC_COMPILER_DIR_ABS)/stage2-inplace/ghc
901 GHC_STAGE3 = $(GHC_COMPILER_DIR_ABS)/stage3-inplace/ghc
902 # XXX All those used to have -no-user-package-conf, but then we can't
905 BOOTSTRAPPING_CONF = $(FPTOOLS_TOP_ABS)/libraries/bootstrapping.conf
907 # NOTE: add -no-user-package-conf for stage 1-3 above, so that
908 # we avoid picking up any packages the user might happen to have
909 # installed for this GHC version. They are bound to be incompatible
910 # with the packages we built in the tree.
915 ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
917 # We are using the stage1 compiler to compile Haskell code, set up
918 # some variables appropriately:
920 MKDEPENDHS =$(GHC_STAGE1)
921 USE_NEW_MKDEPEND_FLAGS = YES
922 GhcVersion = @ProjectVersion@
923 GhcPatchLevel = @ProjectPatchLevel@
924 # oops, these are wrong:
925 GhcMajVersion = @GhcMajVersion@
926 GhcMinVersion = @GhcMinVersion@
931 else # not UseStage1 or BootingFromHc
933 # Some useful GHC version predicates:
934 ghc_ge_607 = @ghc_ge_607@
935 ghc_ge_609 = @ghc_ge_609@
939 USE_NEW_MKDEPEND_FLAGS = $(ghc_ge_609)
940 GhcVersion = @GhcVersion@
941 GhcPatchLevel = @GhcPatchLevel@
942 GhcMajVersion = @GhcMajVersion@
943 GhcMinVersion = @GhcMinVersion@
945 # We build a few packages using the installed GHC as part of the
946 # bootstrapping process. These are installed into a local
947 # package.conf file, $(BOOTSTRAPPING_CONF). When we invoke the
948 # installed GHC we need to pass it -package-conf $(BOOTSTRAPPING_CONF).
949 # So the following variables expand to -package-conf $(BOOTSTRAPPING_CONF)
950 # when $(HC) does *not* point to one of the GHC binaries built in
953 BOOTSTRAPPING_PACKAGE_CONF_HC_OPTS =$(if $(findstring inplace, $(HC)),,-package-conf $(BOOTSTRAPPING_CONF))
954 BOOTSTRAPPING_PACKAGE_CONF_MKDEPENDHS_OPTS =$(if $(findstring inplace, $(MKDEPENDHS)),,-package-conf $(BOOTSTRAPPING_CONF))
957 # Canonicalised ghc version number, used for easy (integer) version
958 # comparisons. We must expand $(GhcMinVersion) to two digits by
959 # adding a leading zero if necessary:
960 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
961 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
963 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
966 #-----------------------------------------------------------------------------
969 # NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
970 # the flag --with-gcc=<blah> instead. The reason is that the configure script
971 # needs to know which gcc you're using in order to perform its tests.
975 WhatGccIsCalled = @WhatGccIsCalled@
976 GccVersion = @GccVersion@
977 ifeq "$(strip $(HaveGcc))" "YES"
978 ifneq "$(strip $(UseGcc))" "YES"
981 CC = $(WhatGccIsCalled)
982 GccDir = $(dir $(WhatGccIsCalled))
986 # default C compiler flags
987 SRC_CC_OPTS = @SRC_CC_OPTS@
989 ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
993 SRC_HSC2HS_OPTS += $(addprefix --cflag=,$(filter-out -O,$(SRC_CC_OPTS)))
994 SRC_HSC2HS_OPTS += $(foreach d,$(GMP_INCLUDE_DIRS),-I$(d))
996 #-----------------------------------------------------------------------------
997 # GMP Library (version 2.0.x or above)
999 HaveLibGmp = @HaveLibGmp@
1002 GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
1003 GMP_LIB_DIRS=@GMP_LIB_DIRS@
1005 #-----------------------------------------------------------------------------
1006 # GMP framework (Mac OS X)
1008 HaveFrameworkGMP = @HaveFrameworkGMP@
1010 #-----------------------------------------------------------------------------
1013 HaveLibMingwEx = @HaveLibMingwEx@
1015 #-----------------------------------------------------------------------------
1016 # Flex (currently unused, could be moved to glafp-utils)
1019 # Don't bother with -lfl, we define our own yywrap()s anyway.
1021 #WAS:FLEX_LIB = @LEXLIB@
1023 #-----------------------------------------------------------------------------
1024 # Other standard (ha!) Unix utilities
1027 ArSupportsInput = @ArSupportsInput@
1028 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
1029 BASH = /usr/local/bin/bash
1031 CONTEXT_DIFF = @ContextDiffCmd@
1033 CPP = @CPP@ @CPPFLAGS@
1036 # RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
1037 # behave plausibly on Haskell sources.
1039 RAWCPP_FLAGS = -undef -traditional
1044 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
1045 # install-sh script (if chosen). This not terribly useful to us, so we convert
1046 # it into an abs. path.
1048 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
1058 PYTHON = @PythonCmd@
1060 PREPROCESSCMD = $(CC) -E
1068 # Some ld's support the -x flag and some don't, so the configure
1069 # script detects which we have and sets LdXFlag to "-x" or ""
1073 # GNU ld supports input via a linker script, which is useful to avoid
1074 # overflowing command-line length limits.
1075 LdIsGNULd = @LdIsGNULd@
1078 # In emergency situations, REAL_SHELL is used to perform shell commands
1079 # from within the ghc driver script, by scribbling the command line to
1080 # a temp file and then having $(REAL_SHELL) execute it.
1082 # The reason for having to do this is that overly long command lines
1083 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
1084 # 2.5.1), which is why this backdoor is provided. The situation of overly
1085 # long command lines is either encountered while doing `make boot' in compiler/,
1086 # or when linking the compiler binary (`hsc').
1088 # We do not use SHELL to execute long commands, as `make' will more than likely
1089 # override whatever setting you have in your environment while executing.
1091 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
1092 # as it is SHELL that will show up the bogosity in the first place, but setting
1093 # it to anything else isn't really portable.
1095 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
1096 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
1105 HSCOLOUR = @HSCOLOUR@
1108 # This is special to literate/, ToDo: add literate-specific
1109 # configure setup to literate/.
1114 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
1122 GTK_CONFIG = @GTK_CONFIG@
1124 # Set this if you want to use Inno Setup to build a Windows installer
1125 # when you make a bindist
1128 #-----------------------------------------------------------------------------
1131 XSLTPROC = @XsltprocCmd@
1132 XMLLINT = @XmllintCmd@
1134 XMLTEX = @XmltexCmd@
1135 PDFXMLTEX = @PdfxmltexCmd@
1138 DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
1140 XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
1141 --stringparam section.autolabel 1 \
1142 --stringparam section.label.includes.component.label 1
1144 #-----------------------------------------------------------------------------
1145 # FPtools support software
1150 # .NET support software
1158 GHC_PKG = @GhcPkgCmd@
1163 GREENCARD = @GreenCardCmd@
1164 GREENCARD_VERSION = @GreenCardVersion@
1170 HAPPY_VERSION = @HappyVersion@
1172 # Options to pass to Happy when we're going to compile the output with GHC
1174 GHC_HAPPY_OPTS = -agc --strict
1176 # Temp. to work around performance problems in the HEAD around 8/12/2003,
1177 # A Happy compiled with this compiler needs more stack.
1178 SRC_HAPPY_OPTS = +RTS -K2m -RTS
1184 ALEX_VERSION = @AlexVersion@
1186 # Options to pass to Happy when we're going to compile the output with GHC
1190 # Should we build haddock docs?
1192 # And HsColour the sources?
1193 ifeq "$(HSCOLOUR)" ""
1200 # Options for compiling in different `ways'.
1202 # To configure up your own way, have a look at some of the standard ways
1203 # such as profiling, and create your own set of WAY_*_OPTS defs below.
1204 # After having done that, add your way string to WAYS, and after having
1205 # run the configure script, the different projects will add the new way
1206 # to the list of ways they support.
1210 # Definitions of the different ways:
1214 # - description, e.g., profiling
1215 # * what they mean to the driver:
1216 # - WAY_p_HC_OPTS gives the list of command-line options
1221 # The ways currently defined.
1223 ALL_WAYS=p t s mp mg a b c d e f g h i j k l m n o A B
1224 USER_WAYS=a b c d e f g h j k l m n o A B
1227 # The following ways currently have treated specially, p t mg,
1228 # as the driver script treats these guys specially and needs to carefully be told
1229 # about the options for these. Hence, we hide the required command line options
1230 # for these in the driver, as this is the only place they are needed.
1232 # If you want to add to these default options, fill in the variables below:
1236 WAY_i_HC_OPTS= -filx -fruntime-types
1239 WAY_p_NAME=profiling
1240 WAY_p_HC_OPTS= -prof
1243 WAY_t_NAME=ticky-ticky profiling
1244 WAY_t_HC_OPTS= -ticky
1247 WAY_mp_NAME=parallel
1248 WAY_mp_HC_OPTS=-parallel
1252 WAY_mg_HC_OPTS=-gransim
1255 # These ways apply to the RTS only:
1259 WAY_thr_NAME=threaded
1260 WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
1263 WAY_thr_p_NAME=threaded profiled
1264 WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
1267 WAY_debug_NAME=debug
1268 WAY_debug_HC_OPTS=-optc-DDEBUG
1271 WAY_debug_p_NAME=debug profiled
1272 WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
1275 WAY_debug_t_NAME=debug ticky-ticky profiling
1276 WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
1279 WAY_thr_debug_NAME=threaded
1280 WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
1282 # Way 'thr_debug_p':
1283 WAY_thr_debug_p_NAME=threaded debug profiling
1284 WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
1286 # Way 'dyn': build dynamic shared libraries
1288 WAY_dyn_HC_OPTS=-fPIC -dynamic
1289 WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
1292 WAY_thr_dyn_NAME=thr_dyn
1293 WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
1295 # Way 'thr_debug_dyn':
1296 WAY_thr_debug_dyn_NAME=thr_dyn
1297 WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
1300 WAY_debug_dyn_NAME=thr_dyn
1301 WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
1304 # Add user-way configurations here:
1354 ################################################################################
1356 # 31-bit-Int Core files
1358 ################################################################################
1361 # It is possible to configure the compiler and prelude to support 31-bit
1362 # integers, suitable for a back-end and RTS using a tag bit on a 32-bit
1363 # architecture. Currently the only useful output from this option is external Core
1364 # files. The following additions to your build.mk will produce the
1365 # 31-bit core output. Note that this is *not* just a library "way"; the
1366 # compiler must be built a special way too.
1368 # GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
1369 # GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
1370 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
1373 ################################################################################
1375 # Library configure arguments
1377 ################################################################################
1379 CONFIGURE_ARGS = @CONFIGURE_ARGS@
1381 ################################################################################
1383 # Bindist testing directory
1385 ################################################################################
1387 ifeq "$(Windows)" "YES"
1388 BIN_DIST_INST_SUBDIR = "install dir"
1390 # I very much doubt that paths with spaces will work on Unix
1391 BIN_DIST_INST_SUBDIR = installed
1394 BIN_DIST_INST_DIR = $(FPTOOLS_TOP_ABS)/bindisttest/$(BIN_DIST_INST_SUBDIR)