4 #################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 #################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 #################################################################################
43 # Project-wide platform variables
45 #################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what. (cygwin32 only).
92 #################################################################################
96 # Set of options applicable to all fptools projects
98 #################################################################################
101 # What parts to build: An fptools build tree does not have to be built
102 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
103 # control which projects are built.
105 # Caution: the projects are built in the order given here, so if some
106 # projects use others you must list them in the correct order.
108 # Generally: * glafp-utils should be first
111 # then it's up to you
113 ProjectsToBuild = glafp-utils ghc
115 # Make a distinction between building and installing
117 ProjectsToInstall = glafp-utils ghc
120 # Should the various project tests directories be built?
122 IncludeTestDirsInBuild=NO
125 # Name variables for the main project
128 ProjectName = $($(Project)ProjectName)
129 ProjectNameShort = $($(Project)ProjectNameShort)
130 ProjectVersion = $($(Project)ProjectVersion)
131 ProjectVersionInt = $($(Project)ProjectVersionInt)
132 ProjectPatchLevel = $($(Project)ProjectPatchLevel)
134 #################################################################################
138 # Set of (configurable) options needed by the ghc tree
139 # plus their default options (if any).
141 #################################################################################
144 # Name variables for ghc:
146 # *ProjectVersion is treated as a *string*
147 # *ProjectVersionInt is treated as an *integer* (for cpp defines)
149 GhcProjectName = The Glorious Glasgow Haskell Compilation System
150 GhcProjectNameShort = ghc
151 GhcProjectVersion = 3.02
152 GhcProjectVersionInt = 302
153 GhcProjectPatchLevel = 0
155 #---------------------------------------------------------------
157 # Variables that control how the compiler itself is built
159 # Specify the Haskell compiler to be used to compile the compiler itself
161 # WithGhcHc Path name of the compiler to use
163 # WithGhcHcType What "type" of compiler is being used
173 # WithGhcHcType=HC_GLASGOW_GHC
175 # Extra ways in which to build the compiler (for example, you might want to
176 # build a profiled compiler so you can see where it spends its time)
179 # Extra option flags to pass to the compiler that compiles the compiler
180 # (Ones that are essential are wired into ghc/compiler/Makefile)
182 # -H25m allocate a bigger heap (default is 6m)
184 # -O compile an optimised compiler
185 # NB! If you add -O you'll almost certainly need to increase
186 # the amount of heap space too (to 15m or more)
188 # -DDEBUG include consistency/assertion checks in the compiled compiler
190 # -dcore-lint check the types after every pass of the compiler;
191 # a pretty strong internal check
194 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
195 GhcWithHscBuiltViaC=NO
197 # Build hsc with -O and turn optimising flag on when compiling
198 # the intermediate C file
199 GhcUseGccForOptAsm=YES
201 # Compile intermediate C file with debugging options set.
202 GhcUseGccForDebuggingAsm=YES
204 # Build a registerised version of hsc and runtime
205 # (you'd be desperate or silly not to).
206 GhcWithRegisterised=YES
208 # Build a compiler with a native code generator backend
209 # (as well as a C backend)
211 # Target platforms supported:
212 # i386, alpha & sparc
213 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
216 # Building various ways?
217 # (right now, empty if not).
218 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
219 BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
220 BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
221 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
222 BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
224 #---------------------------------------------------------------
226 # Variables that control how the prelude libraries and runtime system are built
228 # What extra ways to build the libraries in
229 # In addition to the normal sequential way, the default is to also build
230 # profiled prelude libraries.
233 # Option flags to pass to GHC when it's compiling prelude modules
234 # Typically these are things like -O or -dcore-lint
235 # The ones that are *essential* are wired into ghc/lib/Makefile
237 # -O is pretty desirable, otherwise no inlining of prelude
238 # things (incl "+") happens when compiling with this compiler
241 # Splitting profiled code produces awfully large archives under ELF, so
242 # we turn it off here.
244 # ToDo: track down the source of this.
246 ifeq "$(strip $(way))" "p"
249 ifeq "$(strip $(way))" "mr"
252 ifeq "$(GhcWithHscBuiltViaC)" "NO"
253 GhcLibHcOpts= -O -split-objs -odir $*
255 #NB: .hc files need to distributed in *unsplit* form.
261 # Build the Haskell Readline bindings?
263 GhcLibsWithReadline=NO
265 # Include path to readline.h
266 # (no path == in standard include path)
270 # Build the socket libraries? (ToDo: is this used?)
272 GhcLibsWithSockets=YES
274 # what to include in a binary distribution
278 GhcBinDistDocs = docs ghc/docs/users_guide ghc/docs/libraries
279 GhcBinDistPrlScripts = ghc-$(GhcProjectVersion) stat2resid hstags mkdependHS
280 GhcBinDistLibPrlScripts = hscpp
281 GhcBinDistBins = hp2ps
283 #################################################################################
287 # Happy specific options
289 #################################################################################
292 # Name variables for happy:
294 HappyProjectName = Happy
295 HappyProjectNameShort = happy
296 HappyProjectVersion = 1.5
297 HappyProjectVersionInt = 15
298 HappyProjectPatchLevel = 0
300 # The compiler you'd like to use to compile Happy
301 WithHappyHc = $(WithGhcHc)
303 # HappyHcOpts gives the flags to pass to the Haskell compiler used
304 # to compile the Happy sources with.
308 # what to include in a binary distribution
311 HappyBinDistDirs = happy
312 HappyBinDistDocs = happy/doc
313 HappyBinDistShScripts = happy
315 #################################################################################
319 # Haggis specific options
321 #################################################################################
323 #################################################################################
327 # Green-card specific options
329 #################################################################################
332 #################################################################################
336 # nofib specific options
338 #################################################################################
341 # NoFibSubDirs controls which set of tests should be run
342 # You can run one or more of
351 NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
353 # The different ways to build nofib. Default is just to mirror
354 # what is done for the ghc prelude libraries.
356 NoFibWays=$(GhcLibWays)
358 # Haskell compiler options for nofib
361 # ==============================================================================
363 # END OF PROJECT-SPECIFIC STUFF
365 # Now come the generic configuration options
367 # ==============================================================================
369 #################################################################################
371 # Paths (see paths.mk)
373 #################################################################################
377 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
379 FPTOOLS_TOP_ABS = @hardtop@
382 # Installation directories, we don't use half of these,
383 # but since the configure script has them on offer while
384 # passing through, we might as well set them.
387 exec_prefix = @exec_prefix@
389 #UNUSED, see below: libexecdir = @libexecdir@
391 #sysconfdir = @datadir@
392 #sharedstatedir = @sharedstatedir@
393 #localstatedir = @localstatedir@
396 includedir = @includedir@
397 oldincludedir = @oldincludedir@
399 #UNUSED:srcdir = @srcdir@
402 # Default values for most of the above are only set if
403 # they weren't configured to anything in particular
404 # via the configure script. (i.e., we make no assumption
405 # that the autoconf-generated script will assign defaults
406 # to all of the above).
408 ifeq "$(strip $(exec_prefix))" ""
409 exec_prefix = $(prefix)
411 ifeq "$(strip $(bindir))" ""
412 bindir = $(exec_prefix)/bin
416 # NOTE: by intention, libexecdir and libdir point to
418 # => Only way to override this is to set libexecdir= on the command line.
419 # (NOTE: configure script setting is ignored).
420 libexecdir = $(libdir)
422 ifeq "$(strip $(datadir))" ""
423 datadir = $(prefix)/share
425 ifeq "$(strip $(libdir))" ""
426 libdir = $(exec_prefix)/lib
428 ifeq "$(strip $(infodir))" ""
429 infodir = $(prefix)/info
431 ifeq "$(strip $(includedir))" ""
432 includedir = $(prefix)/include
434 ifeq "$(strip $(oldincludedir))" ""
435 oldincludedir = /usr/include
437 ifeq "$(strip $(mandir))" ""
438 mandir = $(prefix)/man
442 #################################################################################
444 # Utilities programs: flags
446 #################################################################################
448 # If you want to give any standard flags to pretty much any utility
449 # (see utils.mk for a complete list), by adding a line here
453 # where P is the utility. For example, to add -O to all Haskell
459 #################################################################################
461 # Utilities programs: where to find them
463 #################################################################################
465 #-----------------------------------------------------------------------------
466 # FPtools Utility locations
468 # By default, the various utils needed to be build ghc and chums
469 # is set up to point to the utils/ directory. Define here the
470 # path prefix for the utilities. Notice that it's a prefix with
471 # a trailing slash, so that it can be concatenated directly on
472 # front of a program name; if it's not set then we just look
473 # along the shell's $(PATH)
475 # If instead you want to use installed or your own versions of these,
476 # override the various *_PREFIX in build.mk, i.e., having the following
481 # will force `make' to rummage around in your PATH to find `mkdependC' (not
482 # sure it would need it in the first place, but still).
484 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
486 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
487 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
488 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
489 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
490 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
491 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
492 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
493 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
494 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
495 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
498 LITERATE = $(FPTOOLS_TOP)/literate
500 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
501 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
502 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
504 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
505 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
507 RTS_PREFIX = $(FPTOOLS_TOP)/common-rts/
509 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
510 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
511 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
512 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
513 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
514 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
517 #-----------------------------------------------------------------------------
518 # Haskell compiler and mkdependHS
520 HC = $(FPTOOLS_TOP)/ghc/driver/ghc
523 #-----------------------------------------------------------------------------
529 WhatGccIsCalled = gcc
530 ifeq "$(strip $(HaveGcc))" "YES"
531 ifneq "$(strip $(UseGcc))" "YES"
534 CC = $(WhatGccIsCalled)
538 #-----------------------------------------------------------------------------
544 #-----------------------------------------------------------------------------
545 # Other standard (ha!) Unix utilities
548 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
549 BASH = /usr/local/bin/bash
551 # Could be either gzip or compress
553 COMPRESS = @CompressCmd@
554 COMPRESS_SUFFIX = @CompressSuffix@
556 CONTEXT_DIFF = @ContextDiffCmd@
563 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
564 # install-sh script (if chosen). This not terribly useful to us, so we convert
565 # it into an abs. path.
567 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
576 PREPROCESSCMD = $(CC) -E
583 # In emergency situations, REAL_SHELL is used to perform shell commands
584 # from within the ghc driver script, by scribbling the command line to
585 # a temp file and then having $(REAL_SHELL) execute it.
587 # The reason for having to do this is that overly long command lines
588 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
589 # 2.5.1), which is why this backdoor is provided. The situation of overly
590 # long command lines is either encountered while doing `make boot' in ghc/compiler,
591 # or when linking the compiler binary (`hsc').
593 # We do not use SHELL to execute long commands, as `make' will more than likely
594 # override whatever setting you have in your environment while executing.
596 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
597 # as it SHELL that will show up the bogosity in the first place, but setting
598 # it to anything else isn't really portable.
600 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
601 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
610 # Under cygwin32, we have to deal with .exe suffixes
612 EXE_SUFFIX=@ExeSuffix@
615 # This is special to literate/, ToDo: add literate-specific
616 # configure setup to literate/.
621 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
629 #-----------------------------------------------------------------------------
630 # SGML stuff (currently not configured - we assume you have it)
632 SGML2LATEX = sgml2latex
633 SGML2HTML = sgml2html
634 SGML2INFO = sgml2info
637 #-----------------------------------------------------------------------------
638 # FPtools support software
640 # Stuff from fptools/glafp-utils
641 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
642 LTX = $(LTX_PREFIX)ltx
643 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
644 LNDIR = $(LNDIR_PREFIX)lndir
645 MSUB = $(MSUB_PREFIX)msub
646 ETAGS = $(ETAGS_PREFIX)etags
647 VERBATIM = $(VERBATIM_PREFIX)verbatim
648 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
649 SGML2LATEX = sgml2latex
650 RUNTEST = $(RUNTEST_PREFIX)runstdtest
652 HAPPY_VERSION = @HappyVersion@
654 GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
657 # Stuff from fptools/literate
659 INFO = $(UTIL_PREFIX)info
660 MAKEINFO = $(INFO_PREFIX)makeinfo
661 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
662 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
663 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
664 LIT2HTML = $(LITERATE_PREFIX)lit2html
665 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
666 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
667 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
668 LIT2TEXT = $(LITERATE_PREFIX)lit2text
669 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
672 # Stuff from fptools/ghc/utils
674 UNLIT = $(UNLIT_PREFIX)unlit
675 UGEN = $(UGEN_PREFIX)ugen
676 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
677 HP2PS = $(HP2PS_PREFIX)hp2ps
678 HSCPP = $(HSCPP_PREFIX)hscpp
679 HSTAGS = $(HSTAGS_PREFIX)hstags
682 # Options for the compiling different `ways'. Various projects within
683 # the glorious fptools tree support building in various user-configured
684 # ways. For instance, you could set up one `way' such that the prelude
685 # libraries all were built with the option -ffoldr-build-on.
687 # To configure up your own way, have a look at some of the standard ways
688 # such as profiling, and create your own set of WAY_*_OPTS defs below.
689 # After having done that, add your way string to WAYS, and after having
690 # run the configure script, the different projects will add the new way
691 # to the list of ways they support.
695 # IMPORTANT! The WAYS variable configures the different `ways'
696 # you want to build a project (or maybe just parts of it, as is
697 # the case for ghc/). This variable is intended set inside the
698 # project mk setup, enforcing a global fptools WAYS is a bit too
699 # much (do you *really* want to build glafp-utils the profiled-concurrent
704 # Definitions of the different ways:
708 # - description, e.g., profiling
709 # * what they mean to the driver:
710 # - WAY_p_HC_OPTS gives the list of command-line options
715 # The ways currently defined.
717 ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
720 # The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
721 # as the driver script treats these guys specially and needs to carefully be told
722 # about the options for these. Hence, we hide the required command line options
723 # for these in the ghc/driver, as this is the only place they are needed.
725 # If you want to add to these default options, fill in the variables below:
731 WAY_t_NAME=ticky-ticky profiling
732 WAY_t_HC_OPTS= -ticky
735 WAY_u_NAME=unregisterized (using portable C only)
738 # Way `mc': concurrent
739 WAY_mc_NAME=concurrent
740 WAY_mc_HC_OPTS=-concurrent
743 WAY_mr_NAME=profiled concurrent
744 WAY_mr_HC_OPTS=-prof -concurrent
747 WAY_mt_NAME=ticky-ticky concurrent
748 WAY_mt_HC_OPTS=-ticky -concurrent
752 WAY_mp_HC_OPTS=-parallel
758 WAY_mg_HC_OPTS=-gransim
761 # Ways for different garbage collectors
763 WAY_2s_NAME=2-space GC
766 WAY_1s_NAME=1-space GC
769 WAY_du_NAME=dual-mode GC
773 # Add user-way configurations here: