4 #################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 #################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 #################################################################################
43 # Project-wide platform variables
45 #################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
90 #################################################################################
94 # Set of options applicable to all fptools projects
96 #################################################################################
99 # What parts to build: An fptools build tree does not have to be built
100 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
101 # control which projects are built.
103 # Caution: the projects are built in the order given here, so if some
104 # projects use others you must list them in the correct order.
106 # Generally: * glafp-utils should be first
110 # then it's up to you
112 ProjectsToBuild = glafp-utils literate ghc hslibs
114 # Make a distinction between building and installing, ProjectsToInstall
115 # does not include the literate bits..
117 ProjectsToInstall = glafp-utils ghc hslibs
120 # Should the various project tests directories be built?
122 IncludeTestDirsInBuild=NO
124 #################################################################################
128 # Set of (configurable) options needed by the ghc tree
129 # plus their default options (if any).
131 #################################################################################
134 # Name variables for ghc:
136 GhcProjectName =The Glorious Glasgow Haskell Compilation System
137 GhcProjectNameShort =ghc
138 GhcProjectVersion =2.05
139 GhcProjectPatchLevel =0
140 GhcBuildeeVersion =205
141 GhcBuilderVersion =29
144 # Name variables for the fptools, for now equal to the above
147 ProjectName =$(GhcProjectName)
148 ProjectNameShort =$(GhcProjectNameShort)
149 ProjectVersion =$(GhcProjectVersion)
150 ProjectPatchLevel =$(GhcProjectPatchLevel)
153 #---------------------------------------------------------------
155 # Variables that control how the compiler itself is built
157 # Specify the Haskell compiler to be used to compile the compiler itself
158 # WithGhcHc Path name of the compiler to use
159 # Ghc2_0 Whether this compiler is GHC 2.0 or later
160 # (which affects gruesome details about
161 # how mutually recursive modules are handled)
162 # WithGhcHcType What "type" of compiler is being used
171 # WithGhcHcType=HC_GLASGOW_GHC
173 # Extra ways in which to build the compiler (for example, you might want to
174 # build a profiled compiler so you can see where it spends its time)
177 # Extra option flags to pass to the compiler that compiles the compiler
178 # (Ones that are essential are wired into ghc/compiler/Makefile)
180 # -O compiler an optimised compiler
181 # -DDEBUG include consistency/assertion checks in the compiled compiler
182 # -fshow-import-specs show import specialisations
185 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
186 GhcWithHscBuiltViaC=NO
188 # Build hsc with -O and turn optimising flag on when compiling
189 # the intermediate C file
190 GhcUseGccForOptAsm=YES
192 # Compile intermediate C file with debugging options set.
193 GhcUseGccForDebuggingAsm=YES
195 # Build a registerised version of hsc and runtime
196 # (you'd be desperate or silly not to).
197 GhcWithRegisterised=YES
199 # Build a compiler with a native code generator backend
200 # (as well as a C backend)
202 # Target platforms supported:
203 # i386, alpha & sparc
204 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
206 # Build the compiler with the deforester included?
210 # Building various ways?
211 # (right now, empty if not).
212 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
213 BuildingConcurrent=$(subst mc,YES,$(filter mc,$(WAYS)))
214 BuildingProfiling=$(subst p,YES,$(filter p,$(WAYS)))
215 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
216 BuildingProfilingConcurrent=$(subst mr,YES,$(filter mr,$(WAYS)))
218 #---------------------------------------------------------------
220 # Variables that control how the prelude libraries and runtime system are built
222 # What extra ways to build the libraries in
223 # In addition to the normal sequential way, the default is to also build
224 # profiled prelude libraries.
227 # Option flags to pass to GHC when it's compiling prelude modules
228 # Typically these are things like -O or -dcore-lint
229 # The ones that are *essential* are wired into ghc/lib/Makefile
230 GhcLibHcOpts= -split-objs -odir $(basename $*)
233 #################################################################################
237 # Set of (configurable) options needed by the Haskell libraries (hslibs)
238 # plus their default options (if any).
240 #################################################################################
242 # Build the Haskell Readline bindings?
244 HsLibsWithReadline=NO
246 # Include path to readline.h
247 # (no path == in standard include path)
251 # Build the socket libraries?
253 HsLibsWithSockets=YES
256 # The different ways to build hslibs. Default is just to mirror
257 # what is done for the ghc prelude libraries.
259 HsLibWays=$(GhcLibWays)
261 # Option flags for hslibs are by default the same as for the options
262 # used for the prelude libs (see above).
263 HsLibHcOpts=$(GhcLibHcOpts)
265 #################################################################################
269 # Happy specific options
271 #################################################################################
275 #################################################################################
279 # Haggis specific options
281 #################################################################################
285 #################################################################################
289 # Green-card specific options
291 #################################################################################
294 #################################################################################
298 # nofib specific options
300 #################################################################################
303 # NoFibSubDirs controls which set of tests should be run
304 # You can run one or more of
313 NoFibSubDirs = imaginary spectral real GHC_ONLY PRIVATE
315 # The different ways to build nofib. Default is just to mirror
316 # what is done for the ghc prelude libraries.
318 NoFibWays=$(GhcLibWays)
320 # Haskell compiler options for nofib
323 # ==============================================================================
325 # END OF PROJECT-SPECIFIC STUFF
327 # Now come the generic configuration options
329 # ==============================================================================
331 #################################################################################
333 # Paths (see paths.mk)
335 #################################################################################
339 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
341 FPTOOLS_TOP_ABS = @hardtop@
344 # Installation directories, we don't use half of these,
345 # but since the configure script has them on offer while
346 # passing through, we might as well set them.
349 exec_prefix = @exec_prefix@
351 #UNUSED, see below: libexecdir = @libexecdir@
353 #sysconfdir = @datadir@
354 #sharedstatedir = @sharedstatedir@
355 #localstatedir = @localstatedir@
358 includedir = @includedir@
359 oldincludedir = @oldincludedir@
361 #UNUSED:srcdir = @srcdir@
364 # Default values for most of the above are only set if
365 # they weren't configured to anything in particular
366 # via the configure script. (i.e., we make no assumption
367 # that the autoconf-generated script will assign defaults
368 # to all of the above).
370 ifeq "$(strip $(exec_prefix))" ""
371 exec_prefix = $(prefix)
373 ifeq "$(strip $(bindir))" ""
374 bindir = $(exec_prefix)/bin
378 # NOTE: by intention, libexecdir and libdir point to
380 # => Only way to override this is to set libexecdir= on the command line.
381 # (NOTE: configure script setting is ignored).
382 libexecdir = $(libdir)
384 ifeq "$(strip $(datadir))" ""
385 datadir = $(prefix)/share
387 ifeq "$(strip $(libdir))" ""
388 libdir = $(exec_prefix)/lib
390 ifeq "$(strip $(infodir))" ""
391 infodir = $(prefix)/info
393 ifeq "$(strip $(includedir))" ""
394 includedir = $(prefix)/include
396 ifeq "$(strip $(oldincludedir))" ""
397 oldincludedir = /usr/include
399 ifeq "$(strip $(mandir))" ""
400 mandir = $(prefix)/man
404 #################################################################################
406 # Utilities programs: flags
408 #################################################################################
410 # If you want to give any standard flags to pretty much any utility
411 # (see utils.mk for a complete list), by adding a line here
415 # where P is the utility. For example, to add -O to all Haskell
421 #################################################################################
423 # Utilities programs: where to find them
425 #################################################################################
427 #-----------------------------------------------------------------------------
428 # FPtools Utility locations
430 # By default, the various utils needed to be build ghc and chums
431 # is set up to point to the utils/ directory. Define here the
432 # path prefix for the utilities. Notice that it's a prefix with
433 # a trailing slash, so that it can be concatenated directly on
434 # front of a program name; if it's not set then we just look
435 # along the shell's $(PATH)
437 # If instead you want to use installed or your own versions of these,
438 # override the various *_PREFIX in build.mk, i.e., having the following
443 # will force `make' to rummage around in your PATH to find `fastmake' (not
444 # sure it would need it in the first place, but still).
446 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
448 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
449 FASTMAKE_PREFIX = $(GLAFP_UTILS)/fastmake/
450 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
451 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
452 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
453 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
454 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
455 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
456 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
457 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
460 LITERATE = $(FPTOOLS_TOP)/literate
462 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
463 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
464 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
466 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
467 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
469 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
470 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
471 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
472 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
473 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
474 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
477 #-----------------------------------------------------------------------------
478 # Haskell compiler and mkdependHS
480 HC = $(FPTOOLS_TOP)/ghc/driver/ghc
484 # The compiler proper is built with the 1.2 compiler,
485 # so when building the dependencies, we need mkdependHS
486 # for the 1.2 compiler.
488 MKDEPENDHS_1_2 = mkdependHS-1.2
490 #-----------------------------------------------------------------------------
496 WhatGccIsCalled = gcc
497 ifeq "$(strip $(HaveGcc))" "YES"
498 ifneq "$(strip $(UseGcc))" "YES"
501 CC = $(WhatGccIsCalled)
505 #-----------------------------------------------------------------------------
511 #-----------------------------------------------------------------------------
512 # Other standard (ha!) Unix utilities
515 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
516 BASH = /usr/local/bin/bash
518 # Could be either gzip or compress
520 COMPRESS = @CompressCmd@
521 COMPRESS_SUFFIX = @CompressSuffix@
523 CONTEXT_DIFF = @ContextDiffCmd@
531 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
532 # install-sh script (if chosen). This not terribly useful to us, so we convert
533 # it into an abs. path.
535 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
544 PREPROCESSCMD = $(CC) -E
551 # In emergency situations, REAL_SHELL is used to perform shell commands
552 # from within the ghc driver script, by scribbling the command line to
553 # a temp file and then having $(REAL_SHELL) execute it.
555 # The reason for having to do this is that overly long command lines
556 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
557 # 2.5.1), which is why this backdoor is provided. The situation of overly
558 # long command lines is either encountered while doing `make boot' in ghc/compiler,
559 # or when linking the compiler binary (`hsc').
561 # We do not use SHELL to execute long commands, as `make' will more than likely
562 # override whatever setting you have in your environment while executing.
564 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
565 # as it SHELL that will show up the bogosity in the first place, but setting
566 # it to anything else isn't really portable.
568 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
569 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
577 # This is special to literate/, ToDo: add literate-specific
578 # configure setup to literate/.
583 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
592 #-----------------------------------------------------------------------------
593 # FPtools support software
595 # Stuff from fptools/glafp-utils
596 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
597 FASTMAKE = $(FASTMAKE_PREFIX)fastmake
598 LTX = $(LTX_PREFIX)ltx
599 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
600 LNDIR = $(LNDIR_PREFIX)lndir
601 MSUB = $(MSUB_PREFIX)msub
602 ETAGS = $(ETAGS_PREFIX)etags
603 VERBATIM = $(VERBATIM_PREFIX)verbatim
604 RUNTEST = $(RUNTEST_PREFIX)runstdtest
607 GREENCARD = @GreencardCmd@
610 HAPPY = $(HAPPY_PREFIX)happy
614 SRC_HAPPY_OPTS = -1.2
618 # Stuff from fptools/literate
620 INFO = $(UTIL_PREFIX)info
621 MAKEINFO = $(INFO_PREFIX)makeinfo
622 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
623 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
624 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
625 LIT2HTML = $(LITERATE_PREFIX)lit2html
626 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
627 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
628 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
629 LIT2TEXT = $(LITERATE_PREFIX)lit2text
630 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
633 # Stuff from fptools/ghc/utils
635 UNLIT = $(UNLIT_PREFIX)unlit
636 UGEN = $(UGEN_PREFIX)ugen
637 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
638 HP2PS = $(HP2PS_PREFIX)hp2ps
639 HSCPP = $(HSCPP_PREFIX)hscpp
640 HSTAGS = $(HSTAGS_PREFIX)hstags
643 # Options for the compiling different `ways'. Various projects within
644 # the glorious fptools tree support building in various user-configured
645 # ways. For instance, you could set up one `way' such that the prelude
646 # libraries and hslibs all were built with the option -ffoldr-build-on.
648 # To configure up your own way, have a look at some of the standard ways
649 # such as profiling, and create your own set of WAY_*_OPTS defs below.
650 # After having done that, add your way string to WAYS, and after having
651 # run the configure script, the different projects will add the new way
652 # to the list of ways they support.
656 # IMPORTANT! The WAYS variable configures the different `ways'
657 # you want to build a project (or maybe just parts of it, as is
658 # the case for ghc/). This variable is intended set inside the
659 # project mk setup, enforcing a global fptools WAYS is a bit too
660 # much (do you *really* want to build glafp-utils the profiled-concurrent
665 # Definitions of the different ways:
669 # - description, e.g., profiling
670 # * what they mean to the driver:
671 # - WAY_p_HC_OPTS gives the list of command-line options
676 # The ways currently defined.
678 ALL_WAYS=p t u mc mr mt mp mg 1s 2s du a b c d e f g h i j k l m n o A B
681 # The following ways currently have treated specially, p u t mc mt my mp mg 1s 2d du,
682 # as the driver script treats these guys specially and needs to carefully be told
683 # about the options for these. Hence, we hide the required command line options
684 # for these in the ghc/driver, as this is the only place they are needed.
686 # If you want to add to these default options, fill in the variables below:
692 WAY_t_NAME=ticky-ticky profiling
693 WAY_t_HC_OPTS= -ticky
696 WAY_u_NAME=unregisterized (using portable C only)
699 # Way `mc': concurrent
700 WAY_mc_NAME=concurrent
701 WAY_mc_HC_OPTS=-concurrent
704 WAY_mr_NAME=profiled concurrent
705 WAY_mr_HC_OPTS=-prof -concurrent
708 WAY_mt_NAME=ticky-ticky concurrent
709 WAY_mt_HC_OPTS=-ticky -concurrent
713 WAY_mp_HC_OPTS=-parallel
719 WAY_mg_HC_OPTS=-gransim
722 # Ways for different garbage collectors
724 WAY_2s_NAME=2-space GC
727 WAY_1s_NAME=1-space GC
730 WAY_du_NAME=dual-mode GC
734 # Add user-way configurations here: