4 ################################################################################
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
12 # DO NOT EDIT THIS FILE!
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # This may be triggered automatically by the build system (say
16 # if config.mk.in has changed more recently than config.mk),
17 # so if you edit config.mk your changes will be spammed.
19 # - Settings in this file may be overriden by giving replacement
20 # definitions in build.mk. See build.mk.sample for a good
21 # starting point for a build.mk file.
23 # If you don't have a build.mk file then you get defaults for everything.
24 # The defaults should provide a reasonable vanilla build.
26 # This is one of only two files that configure generates (the other is config.h)
28 # There is a section below for each project within the fptools suite
32 # a section corresponding to each of the main .mk files
33 # included by boilerplate.mk (see boilerplate.mk for a list).
36 ################################################################################
38 # Project-wide platform variables
40 ################################################################################
42 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
43 # specifier. E.g. sparc-sun-solaris2
45 # Build platform: the platform on which we are doing this build
46 # Host platform: the platform on which these binaries will run
47 # Target platform: the platform for which this compiler will generate code
49 # We don't support build & host being different, because the build
50 # process creates binaries that are run during the build, and also
53 # If host & target are different, then we are building a compiler
54 # which will generate intermediate .hc files to port to the target
55 # architecture for bootstrapping. The libraries and stage 2 compiler
56 # will be built as HC files for the target system, and likely won't
57 # build on this host platform.
59 # Guidelines for when to use HOST vs. TARGET:
61 # - In the build system (Makefile, foo.mk), normally we should test
62 # $(HOSTPLATFORM). There are some cases (eg. installation), where
63 # we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
64 # doesn't matter which is used.
66 # - In the compiler itself, we should test HOST or TARGET depending
67 # on whether the conditional relates to the code being generated, or
68 # the platform on which the compiler is running. For stage 2,
69 # HOSTPLATFORM should be reset to be TARGETPLATFORM (we currently
70 # don't do this, but we should).
72 # - In the RTS and library code, we should be testing TARGET only.
74 # NOTE: cross-compiling is not well supported by the build system.
75 # You have to do a lot of work by hand to cross compile: see the
76 # section on "Porting GHC" in the Building Guide.
78 HOSTPLATFORM = @HostPlatform@
79 TARGETPLATFORM = @TargetPlatform@
80 BUILDPLATFORM = @BuildPlatform@
83 # in one or two places, we need to get at the OS version (major and
84 # perhaps even minor), HostOS_Full is the OS name reported by
85 # AC_CANONICAL_SYSTEM.
87 HostPlatform_CPP = @HostPlatform_CPP@
88 HostArch_CPP = @HostArch_CPP@
89 HostOS_CPP = @HostOS_CPP@
90 HostOS_Full = @HostOS_Full@
91 HostVendor_CPP = @HostVendor_CPP@
93 TargetPlatform_CPP = @TargetPlatform_CPP@
94 TargetArch_CPP = @TargetArch_CPP@
95 TargetOS_CPP = @TargetOS_CPP@
96 TargetVendor_CPP = @TargetVendor_CPP@
98 BuildPlatform_CPP = @BuildPlatform_CPP@
99 BuildArch_CPP = @BuildArch_CPP@
100 BuildOS_CPP = @BuildOS_CPP@
101 BuildVendor_CPP = @BuildVendor_CPP@
103 @HostPlatform_CPP@_HOST = 1
104 @TargetPlatform_CPP@_TARGET = 1
105 @BuildPlatform_CPP@_BUILD = 1
107 @HostArch_CPP@_HOST_ARCH = 1
108 @TargetArch_CPP@_TARGET_ARCH = 1
109 @BuildArch_CPP@_BUILD_ARCH = 1
111 @HostOS_CPP@_HOST_OS = 1
112 @TargetOS_CPP@_TARGET_OS = 1
113 @BuildOS_CPP@_BUILD_OS = 1
115 @HostVendor_CPP@_HOST_VENDOR = 1
116 @TargetVendor_CPP@_TARGET_VENDOR = 1
117 @BuildVendor_CPP@_BUILD_VENDOR = 1
119 # Leading underscores on symbol names in object files
120 # Valid options: YES/NO
122 LeadingUnderscore=@LeadingUnderscore@
124 # Pin a suffix on executables? If so, what (Windows only).
127 ################################################################################
131 # Set of options applicable to all fptools projects
133 ################################################################################
135 # BootingFromHc - build GHC and the libraries from .hc files?
136 BootingFromHc = @BootingFromHc@
138 # BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
139 # rather than registerised code, i.e., disable the mangler?
140 BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
142 # Build Order: we build Happy, Haddock and Alex before GHC if they are
143 # in this source tree, just in case our GHC build depends on these
144 # local builds rather than installed versions of the tools.
146 # Build the libs first if we're bootstrapping from .hc files.
147 ifeq "$(BootingFromHc)" "YES"
148 AllProjects = glafp-utils happy alex haddock libraries hslibs ghc greencard hdirect hood nofib
150 AllProjects = glafp-utils happy alex haddock ghc libraries hslibs greencard hdirect hood nofib
154 # (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
155 # list is empty, then all projects present in the source tree will be built.
160 # set ProjectsDontInstall to a list of projects which are normally built but
163 ProjectsDontInstall = glafp-utils nofib
166 # Should the various project tests directories be built?
168 IncludeTestDirsInBuild=NO
171 # Which ways should SGML documents be built?
172 # options are: dvi ps pdf html rtf
176 ################################################################################
180 # Set of (configurable) options needed by the ghc tree
181 # plus their default options (if any).
183 ################################################################################
185 #---------------------------------------------------------------
187 # Variables that control how the compiler itself is built
189 #---------------------------------------------------------------
191 # The compiler used to build GHC is $(GHC). To change the actual compiler
192 # used, re-configure with --with-ghc=<path-to-ghc>.
194 # Extra ways in which to build the compiler (for example, you might want to
195 # build a profiled compiler so you can see where it spends its time)
198 # Extra option flags to pass to the compiler that compiles the compiler
199 # (Ones that are essential are wired into ghc/compiler/Makefile)
200 # Typical options to use here:
202 # -DDEBUG include debugging code and assertions (will make the
203 # compiler slower and produce debugging output, but useful
206 # -dcore-lint check the types after every pass of the compiler;
207 # a pretty strong internal check of the compiler being
208 # used to compile GHC. Useful when bootstrapping.
209 GhcHcOpts=-Rghc-timing
211 # Extra options added to specific stages of the compiler bootstrap.
212 # These are placed later on the command line, and may therefore
213 # override options from $(GhcHcOpts).
218 # Build a compiler that will build *unregisterised* libraries and
219 # binaries by default. Unregisterised code is supposed to compile and
220 # run without any support for architecture-specific assembly mangling,
221 # register assignment or tail-calls, and is therefore a good way to get
222 # started when porting GHC to new architectures.
224 # If this is set to NO, you can still use the unregisterised way
225 # (way 'u') to get unregisterised code, but the default way will be
228 # NOTE: the stage1 compiler will be a registerised binary (assuming
229 # the compiler you build with is generating registerised binaries), but
230 # the stage2 compiler will be an unregisterised binary.
234 # Build a compiler with a native code generator backend
235 # (as well as a C backend)
237 # Target platforms supported:
238 # i386, sparc & powerpc
239 ifneq "$(findstring $(HostArch_CPP), i386 sparc powerpc)" ""
240 GhcWithNativeCodeGen=YES
242 GhcWithNativeCodeGen=NO
245 # Include support for generating Java
248 HaveLibDL = @HaveLibDL@
249 HaveRtldNext = @HaveRtldNext@
250 HaveRtldLocal = @HaveRtldLocal@
252 # Include GHCi in the compiler. Default to NO for the time being.
254 ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)" ""
255 GhcWithInterpreter=YES
257 GhcWithInterpreter=NO
261 # Building various ways?
262 # (right now, empty if not).
263 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
264 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
266 #------------------------------------------------------------------------------
267 # Options for Libraries
269 # What extra ways to build the libraries in
270 # In addition to the normal sequential way, the default is to also build
271 # profiled prelude libraries.
272 # When booting from .hc files, turn this off.
273 ifeq "$(BootingFromHc)" "YES"
279 # Option flags to pass to GHC when it's compiling modules in
280 # fptools/libraries. Typically these are things like -O or
281 # -dcore-lint or -H32m. The ones that are *essential* are wired into
284 # -O is pretty desirable, otherwise no inlining of prelude
285 # things (incl "+") happens when compiling with this compiler
287 GhcLibHcOpts=-O -Rghc-timing
289 # Win32 only: Enable the RTS and libraries to be built as DLLs
290 DLLized=@EnableWin32DLLs@
292 # Win32 only: are we building a compiler that tries to reduce external
293 # dependencies? i.e., one that doesn't assume that the user has got
294 # the cygwin toolchain installed on his/her Win32 box.
296 # GHC is still dependent on GNU tools in the backend (gcc to further process
297 # .c/.hc/.s/.o files + 'perl' to mangle and split), but using this
298 # option a GHC distribution can be put together which includes a minimal
299 # set of these open source tools.
301 MinimalUnixDeps=@MinimalUnixDeps@
303 # Strip local symbols from libraries? This can make the libraries smaller,
304 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
309 # ----------------------------------------------------------------------------
310 # Object-file splitting
312 # Set SplitObjs=YES or NO in your build.mk
314 # Don't use -split-objs in in GhcLibHcOpts, because the build
315 # system needs to do other special magic if you are
316 # doing object-file splitting
318 # Don't split object files for libs if we're building DLLs, or booting from
322 ifeq "$(DLLized)" "YES"
325 ifeq "$(BootingFromHc)" "YES"
328 ifeq "$(GhcUnregisterised)" "YES"
331 ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
335 # ----------------------------------------------------------------------------
336 # Options for GHC's RTS
338 # This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
339 # GhcRtsHcOpts is used when compiling .hc files and .c files.
340 # GhcRtsCcOpts is used when compiling .c files only.
342 # For a debugging RTS:
343 # GhcRtsHcOpts = -optc-DDEBUG
346 # For an optimised RTS:
348 GhcRtsCcOpts=-fomit-frame-pointer
350 # Include the front panel code? Needs GTK+.
351 GhcRtsWithFrontPanel = NO
354 # To have the RTS support interoperation with OS threads, set
355 # GhcRtsThreaded to YES (preferably via the --enable-threaded-rts
356 # configure script option). The consequence of this is spelled out
357 # in details elsewhere, but, briefly, Concurrent Haskell threads
358 # can now make external (i.e., C) calls without blocking the progress
359 # of other CH threads. Multiple native threads can also execute
360 # Haskell code without getting in each others way too.
362 GhcRtsThreaded=@ThreadedRts@
364 ################################################################################
368 ################################################################################
370 # Build the Haskell Readline bindings?
372 GhcLibsWithReadline=@HaveReadlineHeaders@
374 # Libraries needed for linking with readline
375 LibsReadline=@LibsReadline@
377 # Include path to readline.h
378 # (no path == in standard include path)
385 # Build the ObjectIO ?
387 GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
389 # Build the Haskell OpenGL/GLUT binding?
391 GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
392 GL_CFLAGS=@GL_CFLAGS@
394 GLUT_LIBS=@GLUT_LIBS@
401 # .NET interop support?
403 DotnetSupport=@DotnetSupport@
405 ################################################################################
409 # Happy specific options
411 ################################################################################
413 # The compiler you'd like to use to compile Happy
414 WithHappyHc = @WithHc@
416 # HappyHcOpts gives the flags to pass to the Haskell compiler used
417 # to compile the Happy sources with.
421 ################################################################################
425 # Haggis specific options
427 ################################################################################
429 ################################################################################
433 # GreenCard specific options
435 ################################################################################
437 ################################################################################
441 # nofib specific options
443 ################################################################################
445 WithNofibHc = $(GHC_INPLACE)
447 # NoFibSubDirs controls which set of tests should be run
448 # You can run one or more of
456 NoFibSubDirs = imaginary spectral real
458 # The different ways to build nofib. Default is just to mirror
459 # what is done for the ghc prelude libraries.
461 NoFibWays = $(GhcLibWays)
463 # Haskell compiler options for nofib
466 # ==============================================================================
468 # END OF PROJECT-SPECIFIC STUFF
470 # Now come the generic configuration options
472 # ==============================================================================
474 ################################################################################
476 # Paths (see paths.mk)
478 ################################################################################
480 # Directory used by GHC (and possibly other tools) for storing
481 # temporary files. If your TMPDIR isn't big enough, either override
482 # this in build.mk or set your environment variable "TMPDIR" to point
483 # to somewhere with more space. (TMPDIR=. is a good choice).
485 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
486 # override an environment variable with the value of the make variable
487 # of the same name (if it exists) when executing sub-processes, so
488 # setting the TMPDIR env var would have no effect in the build tree.
490 DEFAULT_TMPDIR = /tmp
491 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
492 DEFAULT_TMPDIR = C:/TEMP
494 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
495 DEFAULT_TMPDIR = C:/TEMP
498 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
499 FPTOOLS_TOP_ABS = @hardtop@
500 # The platform specific version of 'hardtop'.
501 FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
504 # Installation directories, we don't use half of these,
505 # but since the configure script has them on offer while
506 # passing through, we might as well set them.
509 exec_prefix = @exec_prefix@
513 #sysconfdir = @datadir@
514 #sharedstatedir = @sharedstatedir@
515 #localstatedir = @localstatedir@
517 includedir = @includedir@
518 oldincludedir = @oldincludedir@
521 #UNUSED:infodir = @infodir@
522 #UNUSED:srcdir = @srcdir@
525 # override libdir and datadir to put project-specific stuff in
526 # a subdirectory with the version number included.
528 libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
529 datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
531 # Default place for putting interface files is $(libdir)
532 # (overriden for packages in package.mk)
536 # Default values for most of the above are only set if
537 # they weren't configured to anything in particular
538 # via the configure script. (i.e., we make no assumption
539 # that the autoconf-generated script will assign defaults
540 # to all of the above).
542 ifeq "$(strip $(exec_prefix))" ""
543 exec_prefix = $(prefix)
545 ifeq "$(strip $(bindir))" ""
546 bindir = $(exec_prefix)/bin
550 # NOTE: by intention, libexecdir and libdir point to
552 # => Only way to override this is to set libexecdir= on the command line.
553 # (NOTE: configure script setting is ignored).
554 libexecdir = $(libdir)
556 ifeq "$(strip $(datadir))" ""
557 datadir = $(prefix)/share
559 ifeq "$(strip $(libdir))" ""
560 libdir = $(exec_prefix)/lib
562 ifeq "$(strip $(includedir))" ""
563 includedir = $(prefix)/include
565 ifeq "$(strip $(oldincludedir))" ""
566 oldincludedir = /usr/include
568 ifeq "$(strip $(mandir))" ""
569 mandir = $(prefix)/man
572 ################################################################################
574 # Utilities programs: flags
576 ################################################################################
578 # If you want to give any standard flags to pretty much any utility
579 # (see utils.mk for a complete list), by adding a line here
583 # where P is the utility. For example, to add -O to all Haskell
588 SRC_HC_OPTS += -H16m -O
590 # These flags make flex 8-bit
593 SRC_INSTALL_BIN_OPTS += -s
595 # lint gets all CPP's flags too
596 SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
597 WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
599 # Default fptools options for dllwrap.
600 SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
602 # Flags for CPP when running GreenCard on .pgc files
603 GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
606 ################################################################################
608 # Utilities programs: where to find them
610 ################################################################################
612 #-----------------------------------------------------------------------------
613 # FPtools Utility locations
615 # By default, the various utils needed to be build ghc and chums
616 # is set up to point to the utils/ directory. Define here the
617 # path prefix for the utilities. Notice that it's a prefix with
618 # a trailing slash, so that it can be concatenated directly on
619 # front of a program name; if it's not set then we just look
620 # along the shell's $(PATH)
622 # If instead you want to use installed or your own versions of these,
623 # override the various *_PREFIX in build.mk, i.e., having the following
628 # will force `make' to rummage around in your PATH to find `mkdependC' (not
629 # sure it would need it in the first place, but still).
631 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
633 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
634 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
635 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
636 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
637 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
638 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
639 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
640 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
641 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
642 DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
644 HADDOCK_PREFIX = $(FPTOOLS_TOP)/haddock/
646 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
648 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
649 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
650 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hasktags/
651 HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
653 #-----------------------------------------------------------------------------
654 # Haskell compilers and mkdependHS
656 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
657 # compilers, if available.
659 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
660 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
662 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
663 # (because the version numbers have to be calculated).
666 GhcVersion = @GhcVersion@
667 GhcMajVersion = @GhcMajVersion@
668 GhcMinVersion = @GhcMinVersion@
669 GhcPatchLevel = @GhcPatchLevel@
671 # Canonicalised ghc version number, used for easy (integer) version
672 # comparisons. We must expand $(GhcMinVersion) to two digits by
673 # adding a leading zero if necessary:
674 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
675 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
677 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
686 # Sometimes we want to invoke ghc from the build tree in different
687 # projects (eg. it's handy to have a nofib & a ghc build in the same
688 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
690 GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
691 GHC_STAGE1 = $(FPTOOLS_TOP)/ghc/compiler/stage1/ghc-inplace
692 GHC_STAGE2 = $(FPTOOLS_TOP)/ghc/compiler/stage2/ghc-inplace
693 GHC_STAGE3 = $(FPTOOLS_TOP)/ghc/compiler/stage3/ghc-inplace
695 #-----------------------------------------------------------------------------
698 # NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
699 # the flag --with-gcc=<blah> instead. The reason is that the configure script
700 # needs to know which gcc you're using in order to perform its tests.
704 WhatGccIsCalled = @WhatGccIsCalled@
705 ifeq "$(strip $(HaveGcc))" "YES"
706 ifneq "$(strip $(UseGcc))" "YES"
709 CC = $(WhatGccIsCalled)
713 # default C compiler flags
714 SRC_CC_OPTS = @SRC_CC_OPTS@
716 ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
720 # Solaris2 strikes again.
721 unix_SRC_HSC2HS_OPTS += @unix_SRC_HSC2HS_OPTS@
723 #-----------------------------------------------------------------------------
724 # GMP Library (version 2.0.x or above)
726 HaveLibGmp = @HaveLibGmp@
729 #-----------------------------------------------------------------------------
732 HaveLibMingwEx = @HaveLibMingwEx@
734 #-----------------------------------------------------------------------------
735 # HaskellSupport framework (Mac OS X)
737 HaveFrameworkHaskellSupport = @HaveFrameworkHaskellSupport@
739 #-----------------------------------------------------------------------------
741 # (if present in libc use that one, otherwise use the one in the tree)
743 HavePosixRegex = @HavePosixRegex@
745 #-----------------------------------------------------------------------------
748 GTK_CONFIG = @GTK_CONFIG@
749 GTK_VERSION = @GTK_VERSION@
751 #-----------------------------------------------------------------------------
752 # Flex (currently unused, could be moved to glafp-utils)
755 # Don't bother with -lfl, we define our own yywrap()s anyway.
757 #WAS:FLEX_LIB = @LEXLIB@
759 #-----------------------------------------------------------------------------
760 # Other standard (ha!) Unix utilities
763 ArSupportsInput = @ArSupportsInput@
764 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
765 BASH = /usr/local/bin/bash
767 CONTEXT_DIFF = @ContextDiffCmd@
769 CPP = @CPP@ @CPPFLAGS@
772 # RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
773 # behave plausibly on Haskell sources.
775 RAWCPP_FLAGS = -undef -traditional
779 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
780 # install-sh script (if chosen). This not terribly useful to us, so we convert
781 # it into an abs. path.
783 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
795 PREPROCESSCMD = $(CC) -E
801 # Some ld's support the -x flag and some don't, so the configure
802 # script detects which we have and sets LdXFlag to "-x" or ""
808 # In emergency situations, REAL_SHELL is used to perform shell commands
809 # from within the ghc driver script, by scribbling the command line to
810 # a temp file and then having $(REAL_SHELL) execute it.
812 # The reason for having to do this is that overly long command lines
813 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
814 # 2.5.1), which is why this backdoor is provided. The situation of overly
815 # long command lines is either encountered while doing `make boot' in ghc/compiler,
816 # or when linking the compiler binary (`hsc').
818 # We do not use SHELL to execute long commands, as `make' will more than likely
819 # override whatever setting you have in your environment while executing.
821 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
822 # as it is SHELL that will show up the bogosity in the first place, but setting
823 # it to anything else isn't really portable.
825 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
826 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
836 # This is special to literate/, ToDo: add literate-specific
837 # configure setup to literate/.
842 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
849 #-----------------------------------------------------------------------------
854 SGML2DVI = $(DOCBOOK_PREFIX)db2dvi
855 SGML2HTML = $(DOCBOOK_PREFIX)db2html
856 SGML2PS = $(DOCBOOK_PREFIX)db2ps
857 SGML2PDF = $(DOCBOOK_PREFIX)db2pdf
858 SGML2RTF = $(DOCBOOK_PREFIX)db2rtf
860 SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
862 SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
863 SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
864 SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
865 SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
866 SRC_SGML2PDF_OPTS = -d $(SGMLSTYLESHEET)
868 DOCBOOK_CATALOG = @Catalog@
870 #-----------------------------------------------------------------------------
871 # FPtools support software
873 # Stuff from fptools/glafp-utils
874 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
875 LTX = $(LTX_PREFIX)ltx
876 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
877 LNDIR = $(LNDIR_PREFIX)lndir
878 ETAGS = $(ETAGS_PREFIX)etags
879 VERBATIM = $(VERBATIM_PREFIX)verbatim
880 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
881 RUNTEST = $(RUNTEST_PREFIX)runstdtest
887 # .NET support software
895 GHC_PKG = @GhcPkgCmd@
900 GREENCARD = @GreenCardCmd@
901 GREENCARD_VERSION = @GreenCardVersion@
907 HAPPY_VERSION = @HappyVersion@
909 # Options to pass to Happy when we're going to compile the output with GHC
911 GHC_HAPPY_OPTS = -agc
917 ALEX_VERSION = @AlexVersion@
919 # Options to pass to Happy when we're going to compile the output with GHC
926 HADDOCK = @HaddockCmd@
927 HADDOCK_INPLACE = $(HADDOCK_PREFIX)/src/haddock-inplace
930 # Stuff from fptools/literate
932 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
933 LIT2HTML = $(LITERATE_PREFIX)lit2html
934 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
935 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
936 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
937 LIT2TEXT = $(LITERATE_PREFIX)lit2text
940 # Stuff from fptools/ghc/utils
942 UNLIT = $(UNLIT_PREFIX)unlit$(exeext)
943 HP2PS = $(HP2PS_PREFIX)hp2ps$(exeext)
944 HSTAGS = $(HSTAGS_PREFIX)hasktags
945 HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
948 # Options for the compiling different `ways'. Various projects within
949 # the glorious fptools tree support building in various user-configured
950 # ways. For instance, you could set up one `way' such that the prelude
951 # libraries all were built with the option -ffoldr-build-on.
953 # To configure up your own way, have a look at some of the standard ways
954 # such as profiling, and create your own set of WAY_*_OPTS defs below.
955 # After having done that, add your way string to WAYS, and after having
956 # run the configure script, the different projects will add the new way
957 # to the list of ways they support.
961 # IMPORTANT! The WAYS variable configures the different `ways'
962 # you want to build a project (or maybe just parts of it, as is
963 # the case for ghc/). This variable is intended set inside the
964 # project mk setup, enforcing a global fptools WAYS is a bit too
965 # much (do you *really* want to build glafp-utils the profiled-concurrent
970 # Definitions of the different ways:
974 # - description, e.g., profiling
975 # * what they mean to the driver:
976 # - WAY_p_HC_OPTS gives the list of command-line options
981 # The ways currently defined.
983 ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
984 USER_WAYS=a b c d e f g h j k l m n o A B
987 # The following ways currently have treated specially, p u t mg,
988 # as the driver script treats these guys specially and needs to carefully be told
989 # about the options for these. Hence, we hide the required command line options
990 # for these in the ghc/driver, as this is the only place they are needed.
992 # If you want to add to these default options, fill in the variables below:
996 WAY_i_HC_OPTS= -filx -fruntime-types
1000 WAY_p_HC_OPTS= -prof
1003 WAY_t_NAME=ticky-ticky profiling
1004 WAY_t_HC_OPTS= -ticky
1007 WAY_u_NAME=unregisterized (using portable C only)
1008 WAY_u_HC_OPTS=-unreg
1011 WAY_s_NAME=threads (for SMP)
1015 WAY_mp_NAME=parallel
1016 WAY_mp_HC_OPTS=-parallel
1020 WAY_mg_HC_OPTS=-gransim
1023 # Add user-way configurations here:
1073 ################################################################################
1075 # 31-bit-Int Core files
1077 ################################################################################
1080 # It is possible to configure the compiler and prelude to support 31-bit
1081 # integers, suitable for a back-end and RTS using a tag bit on a 32-bit
1082 # architecture. Currently the only useful output from this option is external Core
1083 # files. The following additions to your build.mk will produce the
1084 # 31-bit core output. Note that this is *not* just a library "way"; the
1085 # compiler must be built a special way too.
1087 # GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
1088 # GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
1089 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31