4 ################################################################################
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
12 # DO NOT EDIT THIS FILE!
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # This may be triggered automatically by the build system (say
16 # if config.mk.in has changed more recently than config.mk),
17 # so if you edit config.mk your changes will be spammed.
19 # - Settings in this file may be overriden by giving replacement
20 # definitions in build.mk. See build.mk.sample for a good
21 # starting point for a build.mk file.
23 # If you don't have a build.mk file then you get defaults for everything.
24 # The defaults should provide a reasonable vanilla build.
26 # This is one of only two files that configure generates (the other is config.h)
29 ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
30 ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
31 $(error GNU make version 3.79.1 or later is required.)
35 ################################################################################
40 # ProjectVersion is treated as a *string*
41 # ProjectVersionInt is treated as an *integer* (for cpp defines)
43 # Versioning scheme: A.B.C
44 # A: major version, decimal, any number of digits
45 # B: minor version, decimal, any number of digits
46 # C: patchlevel, one digit, omitted if zero.
48 # ProjectVersionInt does *not* contain the patchlevel (rationale: this
49 # figure is used for conditional compilations, and library interfaces
50 # etc. are not supposed to change between patchlevels).
52 # The ProjectVersionInt is included in interface files, and GHC
53 # checks that it's reading interface generated by the same ProjectVersion
54 # as itself. It does this even though interface file syntax may not
55 # change between versions. Rationale: calling conventions or other
56 # random .o-file stuff might change even if the .hi syntax doesn't
58 ProjectName = @ProjectName@
60 ProjectVersion = @ProjectVersion@$(ProjectTags)
61 ProjectVersionInt = @ProjectVersionInt@
62 ProjectPatchLevel = @ProjectPatchLevel@
64 ################################################################################
68 ################################################################################
70 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
71 # specifier. E.g. sparc-sun-solaris2
73 # Build platform: the platform on which we are doing this build
74 # Host platform: the platform on which these binaries will run
75 # Target platform: the platform for which this compiler will generate code
77 # We don't support build & host being different, because the build
78 # process creates binaries that are run during the build, and also
81 # If host & target are different, then we are building a compiler
82 # which will generate intermediate .hc files to port to the target
83 # architecture for bootstrapping. The libraries and stage 2 compiler
84 # will be built as HC files for the target system, and likely won't
85 # build on this host platform.
87 # An important invariant is that for any piece of source code, the
88 # platform on which the code is going to run is the HOST platform,
89 # and the platform on which we are building is the BUILD platform.
90 # Additionally for the compiler, the platform this compiler will
91 # generate code for is the TARGET. TARGET is not meaningful outside
92 # the compiler sources.
94 # Guidelines for when to use HOST vs. TARGET:
96 # - In the build system (Makefile, foo.mk), normally we should test
97 # $(HOSTPLATFORM). There are some cases (eg. installation), where
98 # we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
99 # doesn't matter which is used.
101 # - In the compiler itself, we should test HOST or TARGET depending
102 # on whether the conditional relates to the code being generated, or
103 # the platform on which the compiler is running. See the section
104 # on "Coding Style" in the commentary for more details.
106 # - In all other code, we should be testing HOST only.
108 # NOTE: cross-compiling is not well supported by the build system.
109 # You have to do a lot of work by hand to cross compile: see the
110 # section on "Porting GHC" in the Building Guide.
112 HOSTPLATFORM = @HostPlatform@
113 TARGETPLATFORM = @TargetPlatform@
114 BUILDPLATFORM = @BuildPlatform@
117 # in one or two places, we need to get at the OS version (major and
118 # perhaps even minor), HostOS_Full is the OS name reported by
119 # AC_CANONICAL_SYSTEM.
121 HostPlatform_CPP = @HostPlatform_CPP@
122 HostArch_CPP = @HostArch_CPP@
123 HostOS_CPP = @HostOS_CPP@
124 HostOS_Full = @HostOS_Full@
125 HostVendor_CPP = @HostVendor_CPP@
127 TargetPlatform_CPP = @TargetPlatform_CPP@
128 TargetArch_CPP = @TargetArch_CPP@
129 TargetOS_CPP = @TargetOS_CPP@
130 TargetVendor_CPP = @TargetVendor_CPP@
132 BuildPlatform_CPP = @BuildPlatform_CPP@
133 BuildArch_CPP = @BuildArch_CPP@
134 BuildOS_CPP = @BuildOS_CPP@
135 BuildVendor_CPP = @BuildVendor_CPP@
137 @HostPlatform_CPP@_HOST = 1
138 @TargetPlatform_CPP@_TARGET = 1
139 @BuildPlatform_CPP@_BUILD = 1
141 @HostArch_CPP@_HOST_ARCH = 1
142 @TargetArch_CPP@_TARGET_ARCH = 1
143 @BuildArch_CPP@_BUILD_ARCH = 1
145 @HostOS_CPP@_HOST_OS = 1
146 @TargetOS_CPP@_TARGET_OS = 1
147 @BuildOS_CPP@_BUILD_OS = 1
149 @HostVendor_CPP@_HOST_VENDOR = 1
150 @TargetVendor_CPP@_TARGET_VENDOR = 1
151 @BuildVendor_CPP@_BUILD_VENDOR = 1
153 ################################################################################
155 # Global configuration options
157 ################################################################################
159 # Leading underscores on symbol names in object files
160 # Valid options: YES/NO
162 LeadingUnderscore=@LeadingUnderscore@
164 # Pin a suffix on executables? If so, what (Windows only).
168 # Windows=YES if on a Windows platform
169 ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
175 # BootingFromHc - build GHC and the libraries from .hc files?
176 BootingFromHc = @BootingFromHc@
178 # BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
179 # rather than registerised code, i.e., disable the mangler?
180 BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
183 # Which ways should DocBook XML documents be built?
184 # options are: dvi ps pdf html chm HxS
188 ################################################################################
190 # Variables that control how the compiler itself is built
192 ################################################################################
194 # The compiler used to build GHC is $(GHC). To change the actual compiler
195 # used, re-configure with --with-ghc=<path-to-ghc>.
197 # Extra ways in which to build the compiler (for example, you might want to
198 # build a profiled compiler so you can see where it spends its time)
201 # Extra option flags to pass to the compiler that compiles the compiler
202 # (Ones that are essential are wired into compiler/Makefile)
203 # Typical options to use here:
205 # -DDEBUG include debugging code and assertions (will make the
206 # compiler slower and produce debugging output, but useful
209 # -dcore-lint check the types after every pass of the compiler;
210 # a pretty strong internal check of the compiler being
211 # used to compile GHC. Useful when bootstrapping.
212 GhcHcOpts=-Rghc-timing
214 # Extra options added to specific stages of the compiler bootstrap.
215 # These are placed later on the command line, and may therefore
216 # override options from $(GhcHcOpts).
224 # Build a compiler that will build *unregisterised* libraries and
225 # binaries by default. Unregisterised code is supposed to compile and
226 # run without any support for architecture-specific assembly mangling,
227 # register assignment or tail-calls, and is therefore a good way to get
228 # started when porting GHC to new architectures.
230 # If this is set to NO, you can still use the unregisterised way
231 # (way 'u') to get unregisterised code, but the default way will be
234 # NOTE: the stage1 compiler will be a registerised binary (assuming
235 # the compiler you build with is generating registerised binaries), but
236 # the stage2 compiler will be an unregisterised binary.
238 ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
239 GhcUnregisterised=YES
244 # Build a compiler with a native code generator backend
245 # (as well as a C backend)
247 # Target platforms supported:
249 # sparc has bitrotted
250 # AIX is not supported
251 ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
252 OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
254 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
255 GhcWithNativeCodeGen=$(strip\
256 $(if $(filter YESYESNO,\
257 $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
259 # Include support for generating Java
262 HaveLibDL = @HaveLibDL@
264 # ArchSupportsSMP should be set iff there is support for that arch in
266 ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
268 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
269 GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
271 # Whether to include GHCi in the compiler. Depends on whether the RTS linker
272 # has support for this OS/ARCH combination.
274 OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
275 ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
277 ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
278 GhcWithInterpreter=YES
280 GhcWithInterpreter=NO
283 # GhcEnableTablesNextToCode tells us whether the target architecture
284 # supports placing info tables directly before the entry code
285 # (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
286 # TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
287 # code or not, which may be decided by options to the compiler later.
288 ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
289 GhcEnableTablesNextToCode=NO
291 GhcEnableTablesNextToCode=YES
294 # When building bindists we set this to yes so that the binaries are as
295 # portable as possible.
299 # Building various ways?
300 # (right now, empty if not).
301 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
302 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
304 # Interface file version (hi-boot files only)
306 # A GHC built with HscIfaceFileVersion=n will look for
307 # M.hi-boot-n, and only then for
309 # (It'll be happy with the latter if the former doesn't exist.)
312 # This variable is used ONLY for hi-boot files. Its only purpose is
313 # to allow you to have a single directory with multiple .hi-boot files
314 # for the same module, each corresponding to a different version of
317 # HscIfaceFileVersion is propagated to hsc via
318 # compiler/main/Config.hs, which is automatically generated by
321 HscIfaceFileVersion=6
325 #------------------------------------------------------------------------------
326 # Options for Libraries
328 # What extra ways to build the libraries in
329 # In addition to the normal sequential way, the default is to also build
330 # profiled prelude libraries.
331 # When booting from .hc files, turn this off.
332 ifeq "$(BootingFromHc)" "YES"
338 # In addition, the RTS is built in some further variations. Ways that
342 # thr_p : threaded profiled
343 # debug : debugging (compile with -g for the C compiler, and -DDEBUG)
344 # debug_p : debugging profiled
345 # debug_u : debugging unregisterised
346 # thr_debug : debugging threaded
347 # thr_debug_p : debugging threaded profiled
348 # t : ticky-ticky profiling
349 # debug_t : debugging ticky-ticky profiling
353 # Usually want the debug version
354 ifeq "$(BootingFromHc)" "NO"
358 # Want the threaded versions unless we're unregisterised
359 # Defer the check until later by using $(if..), because GhcUnregisterised might
360 # be set in build.mk, which hasn't been read yet.
361 GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_p thr_debug,)
363 # We can only build GHCi threaded if we have a threaded RTS:
364 GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
366 # Option flags to pass to GHC when it's compiling modules in
367 # fptools/libraries. Typically these are things like -O or
368 # -dcore-lint or -H32m. The ones that are *essential* are wired into
371 # -O is pretty desirable, otherwise no inlining of prelude
372 # things (incl "+") happens when compiling with this compiler
374 # -fgenerics switches on generation of support code for
375 # derivable type classes. This is now off by default,
376 # but we switch it on for the libraries so that we generate
377 # the code in case someone importing wants it
379 GhcLibHcOpts=-O -Rghc-timing -fgenerics
381 # Win32 only: Enable the RTS and libraries to be built as DLLs
382 DLLized=@EnableWin32DLLs@
384 # Strip local symbols from libraries? This can make the libraries smaller,
385 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
389 # These are the URL patterns that Haddock uses to generate the "Source
390 # File" links on each page.
391 CorePackageSourceURL = http://darcs.haskell.org/ghc-6.6/packages/$(PACKAGE)/%{FILE}
392 ExtraPackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
394 # These are the packages required to be present in order to bootstrap GHC
395 # NB. must be synced with libraries/core-packages
396 CorePackages = base Cabal haskell98 readline regex-base regex-compat \
397 regex-posix parsec stm template-haskell unix Win32
399 # ----------------------------------------------------------------------------
400 # Object-file splitting
402 # Set SplitObjs=YES or NO in your build.mk
404 # Don't use -split-objs in in GhcLibHcOpts, because the build
405 # system needs to do other special magic if you are
406 # doing object-file splitting
408 # lazy test, so that $(GhcUnregisterised) can be set in build.mk
409 SplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),\
410 $(if $(filter YES,$(BootingFromHC)),\
412 $(if $(filter NO,$(GhcUnregisterised)),\
420 # Build the ObjectIO ?
422 GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
424 # .NET interop support?
426 DotnetSupport=@DotnetSupport@
428 # Build unix package?
430 GhcLibsWithUnix=@GhcLibsWithUnix@
432 # ----------------------------------------------------------------------------
433 # Options for GHC's RTS
435 # For an optimised RTS (you probably don't want to change these; we build
436 # a debugging RTS by default now. Use -debug to get it).
437 GhcRtsHcOpts=-optc-O2
438 GhcRtsCcOpts=-fomit-frame-pointer
440 # Include the front panel code? Needs GTK+.
441 GhcRtsWithFrontPanel = NO
443 # Include support for CPU performance counters via the PAPI library in the RTS?
444 # (PAPI: http://icl.cs.utk.edu/papi/)
446 HavePapi = @HavePapi@
448 ################################################################################
452 # nofib specific options
454 ################################################################################
456 WithNofibHc = $(GHC_INPLACE)
458 # NoFibSubDirs controls which set of tests should be run
459 # You can run one or more of
467 NoFibSubDirs = imaginary spectral real
469 # The different ways to build nofib. Default is just to mirror
470 # what is done for the ghc prelude libraries.
472 NoFibWays = $(GhcLibWays)
474 # Haskell compiler options for nofib
477 # Number of times to run each program
480 ################################################################################
482 # Paths (see paths.mk)
484 ################################################################################
486 # Directory used by GHC (and possibly other tools) for storing
487 # temporary files. If your TMPDIR isn't big enough, either override
488 # this in build.mk or set your environment variable "TMPDIR" to point
489 # to somewhere with more space. (TMPDIR=. is a good choice).
491 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
492 # override an environment variable with the value of the make variable
493 # of the same name (if it exists) when executing sub-processes, so
494 # setting the TMPDIR env var would have no effect in the build tree.
496 DEFAULT_TMPDIR = /tmp
497 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
498 DEFAULT_TMPDIR = /C/TEMP
500 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
501 DEFAULT_TMPDIR = /C/TEMP
504 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
505 # On Windows this is a c:/foo/bar style path.
506 FPTOOLS_TOP_ABS = @hardtop@
508 BIN_DIST_NAME=ghc-$(ProjectVersion)
509 BIN_DIST_TOPDIR_REL=$(FPTOOLS_TOP)
510 BIN_DIST_TOPDIR_ABS=$(FPTOOLS_TOP_ABS)
511 BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
512 BIN_DIST_TARBALL=$(BIN_DIST_TOPDIR_REL)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.bz2
514 BIN_DIST_INST_DIR = $(FPTOOLS_TOP_ABS)/bindisttest/installed
516 # Definition of installation directories, we don't use half of these, but since
517 # the configure script has them on offer while passing through, we might as well
518 # set them. Note that we have to be careful, because the GNU coding standards
519 # have changed a bit over the course of time, and autoconf development reflects
522 # A little bit of history regarding autoconf and GNU coding standards, use this
523 # as a cheat-sheet for the stuff below:
525 # variable | default < 2.60 | default >= 2.60
526 # ------------+--------------------+--------------------------------------
527 # exec_prefix | ${prefix} | ${prefix}
528 # libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
529 # datarootdir | NONE! | ${prefix}/share
530 # datadir | ${prefix}/share | ${datarootdir}
531 # infodir | ${prefix}/info | ${datarootdir}/info
532 # mandir | ${prefix}/man | ${datarootdir}/man
533 # docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
534 # htmldir | NONE! | ${docdir}
535 # dvidir | NONE! | ${docdir}
536 # pdfdir | NONE! | ${docdir}
537 # psdir | NONE! | ${docdir}
539 # NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
540 # string "${docdir}", not the value of docdir! This is crucial for the GNU
543 # This gets used in the default docdir when autoconf >= 2.60 is used
544 PACKAGE_TARNAME := @PACKAGE_TARNAME@
548 # New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
549 # However, in order to support older autoconf's we don't use it.
550 # datarootdir is set lower down instead.
551 # But, as datadir is defined in terms of datarootdir, we also need to
552 # set it to the value (if any) that configure gives it here.
553 datarootdir := @datarootdir@
555 exec_prefix := @exec_prefix@
557 datadir0 := @datadir@
559 includedir := @includedir@
562 ifeq "$(Windows)" "YES"
564 # Hack: our directory layouts tend to be different on Windows, so
565 # hack around configure's bogus assumptions here.
566 datarootdir := $(prefix)
572 # Unix: override libdir and datadir to put ghc-specific stuff in
573 # a subdirectory with the version number included.
574 datarootdir := $(datadir0)
575 datadir := $(datadir0)/ghc-$(ProjectVersion)
576 libdir := $(libdir0)/ghc-$(ProjectVersion)
580 headerdir := $(libdir)/include
582 # New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
583 # However, in order to support older autoconf's we don't use them.
586 #htmldir := @htmldir@
591 docdir := $(datarootdir)/doc/ghc
597 # Default place for putting interface files is $(libdir)
598 # (overriden for packages in package.mk)
601 # NOTE: by intention, libexecdir and libdir point to
603 # => Only way to override this is to set libexecdir= on the command line.
604 # (NOTE: configure script setting is ignored).
605 libexecdir = $(libdir)
607 # This is a bit of a lie, as this is a wrapper rather than the program
608 # itself. However, it means that we don't have to worry about Windows
609 # and non-Windows having different extensions.
610 GHC_PKG_PROG = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)/ghc-pkg-inplace
612 #-----------------------------------------------------------------------------
613 # install configuration
616 # Set this to have files installed with a specific owner
621 # Set this to have files installed with a specific group
626 # Invocations of `install' for the four different classes
629 INSTALL_PROGRAM = $(INSTALL) -m 755
630 INSTALL_SCRIPT = $(INSTALL) -m 755
631 INSTALL_SHLIB = $(INSTALL) -m 755
632 INSTALL_DATA = $(INSTALL) -m 644
633 INSTALL_HEADER = $(INSTALL) -m 644
634 INSTALL_MAN = $(INSTALL) -m 644
635 INSTALL_DIR = $(MKDIRHIER)
637 # -----------------------------------------------------------------------------
638 # Utilities programs: flags
640 # If you want to give any standard flags to pretty much any utility
641 # (see utils.mk for a complete list), by adding a line here
645 # where P is the utility. For example, to add -O to all Haskell
650 SRC_HC_OPTS += -H16m -O
652 # These flags make flex 8-bit
655 SRC_INSTALL_BIN_OPTS += -s
657 # lint gets all CPP's flags too
658 SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
659 WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
661 # Default fptools options for dllwrap.
662 SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
664 # Flags for CPP when running GreenCard on .pgc files
665 GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
668 ################################################################################
670 # Layout of the source tree
672 ################################################################################
674 # Here we provide defines for the various directories in the source tree,
675 # so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
676 # indicates a directory relative to the top of the source tree, whereas
677 # $(GHC_FOO_DIR) is a directory relative to the current directory.
678 # $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
680 GHC_UTILS_DIR_REL = utils
681 GHC_INCLUDE_DIR_REL = includes
682 GHC_COMPILER_DIR_REL = compiler
683 GHC_RTS_DIR_REL = rts
684 GHC_UTILS_DIR_REL = utils
685 GHC_DRIVER_DIR_REL = driver
686 GHC_COMPAT_DIR_REL = compat
688 GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
689 GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
690 GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
691 GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
692 GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
693 GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
694 GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
695 GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
696 GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
697 GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
698 GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
699 GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
700 GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
701 GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
703 GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
704 GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
705 GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
707 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
708 GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
709 GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
710 GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
711 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
712 GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
713 GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
715 GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
716 GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
717 GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
718 GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
719 GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
720 GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
721 GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
722 GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
723 GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
724 GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL)
725 GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
726 GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
727 GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
728 GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
730 GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
731 GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
732 GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
734 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
735 GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
736 GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
737 GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
738 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
739 GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
740 GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
742 GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
743 GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
744 GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
745 GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
746 GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
747 GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
748 GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
749 GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
750 GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
751 GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
752 GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
753 GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
754 GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
755 GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
757 GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
758 GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
759 GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
761 # -----------------------------------------------------------------------------
762 # Names of programs in the GHC tree
764 # xxx_PGM the name of an executable, without the path
765 # xxx the executable relative to the current dir
767 GHC_UNLIT_PGM = unlit$(exeext)
768 GHC_HP2PS_PGM = hp2ps
769 GHC_HSTAGS_PGM = hasktags
770 GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
771 GHC_TOUCHY_PGM = touchy$(exeext)
772 GHC_MANGLER_PGM = ghc-asm
773 GHC_SPLIT_PGM = ghc-split
774 GHC_SYSMAN_PGM = SysMan
775 GHC_PKG_INPLACE_PGM = ghc-pkg-inplace
776 GHC_GENPRIMOP_PGM = genprimopcode
777 GHC_GENAPPLY_PGM = genapply
778 GHC_MKDEPENDC_PGM = mkdependC
780 GHC_MKDIRHIER_PGM = mkdirhier
781 GHC_LNDIR_PGM = lndir
782 GHC_RUNTEST_PGM = runstdtest
784 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
792 UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
793 HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
794 HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
795 HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
796 MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
797 SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
798 SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
799 GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM)
800 GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
801 GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
802 MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
803 LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
804 MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
805 LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
806 RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
808 GENERATED_FILE = chmod a-w
809 EXECUTABLE_FILE = chmod +x
811 #-----------------------------------------------------------------------------
812 # Haskell compilers and mkdependHS
814 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
815 # compilers, if available.
817 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
818 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
820 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
821 # (because the version numbers have to be calculated).
824 GhcDir = $(dir $(GHC))
826 # Set to YES if $(GHC) has the readline package installed
827 GhcHasReadline = @GhcHasReadline@
832 # Sometimes we want to invoke ghc from the build tree in different
833 # places (eg. it's handy to have a nofib & a ghc build in the same
834 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
836 GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace
837 GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace
838 GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace
839 GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace
841 ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
843 # We are using the stage1 compiler to compile Haskell code, set up
844 # some variables appropriately:
846 MKDEPENDHS =$(GHC_STAGE1)
847 GhcVersion = @ProjectVersion@
848 GhcPatchLevel = @ProjectPatchLevel@
849 # oops, these are wrong:
850 GhcMajVersion = @GhcMajVersion@
851 GhcMinVersion = @GhcMinVersion@
859 else # not UseStage1 or BootingFromHc
863 GhcVersion = @GhcVersion@
864 GhcPatchLevel = @GhcPatchLevel@
865 GhcMajVersion = @GhcMajVersion@
866 GhcMinVersion = @GhcMinVersion@
868 # Some useful GHC version predicates:
869 ghc_ge_601 = @ghc_ge_601@
870 ghc_ge_602 = @ghc_ge_602@
871 ghc_ge_603 = @ghc_ge_603@
872 ghc_ge_605 = @ghc_ge_605@
873 ghc_ge_607 = @ghc_ge_607@
876 # Canonicalised ghc version number, used for easy (integer) version
877 # comparisons. We must expand $(GhcMinVersion) to two digits by
878 # adding a leading zero if necessary:
879 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
880 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
882 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
885 #-----------------------------------------------------------------------------
888 # NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
889 # the flag --with-gcc=<blah> instead. The reason is that the configure script
890 # needs to know which gcc you're using in order to perform its tests.
894 WhatGccIsCalled = @WhatGccIsCalled@
895 GccVersion = @GccVersion@
896 ifeq "$(strip $(HaveGcc))" "YES"
897 ifneq "$(strip $(UseGcc))" "YES"
900 CC = $(WhatGccIsCalled)
901 GccDir = $(dir $(WhatGccIsCalled))
905 # default C compiler flags
906 SRC_CC_OPTS = @SRC_CC_OPTS@
908 ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
912 #-----------------------------------------------------------------------------
913 # GMP Library (version 2.0.x or above)
915 HaveLibGmp = @HaveLibGmp@
918 GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
919 GMP_LIB_DIRS=@GMP_LIB_DIRS@
921 #-----------------------------------------------------------------------------
922 # GMP framework (Mac OS X)
924 HaveFrameworkGMP = @HaveFrameworkGMP@
926 #-----------------------------------------------------------------------------
929 HaveLibMingwEx = @HaveLibMingwEx@
931 #-----------------------------------------------------------------------------
932 # Flex (currently unused, could be moved to glafp-utils)
935 # Don't bother with -lfl, we define our own yywrap()s anyway.
937 #WAS:FLEX_LIB = @LEXLIB@
939 #-----------------------------------------------------------------------------
940 # Other standard (ha!) Unix utilities
943 ArSupportsInput = @ArSupportsInput@
944 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
945 BASH = /usr/local/bin/bash
947 CONTEXT_DIFF = @ContextDiffCmd@
949 CPP = @CPP@ @CPPFLAGS@
952 # RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
953 # behave plausibly on Haskell sources.
955 RAWCPP_FLAGS = -undef -traditional
960 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
961 # install-sh script (if chosen). This not terribly useful to us, so we convert
962 # it into an abs. path.
964 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
976 PREPROCESSCMD = $(CC) -E
984 # Some ld's support the -x flag and some don't, so the configure
985 # script detects which we have and sets LdXFlag to "-x" or ""
989 # GNU ld supports input via a linker script, which is useful to avoid
990 # overflowing command-line length limits.
991 LdIsGNULd = @LdIsGNULd@
994 # In emergency situations, REAL_SHELL is used to perform shell commands
995 # from within the ghc driver script, by scribbling the command line to
996 # a temp file and then having $(REAL_SHELL) execute it.
998 # The reason for having to do this is that overly long command lines
999 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
1000 # 2.5.1), which is why this backdoor is provided. The situation of overly
1001 # long command lines is either encountered while doing `make boot' in compiler/,
1002 # or when linking the compiler binary (`hsc').
1004 # We do not use SHELL to execute long commands, as `make' will more than likely
1005 # override whatever setting you have in your environment while executing.
1007 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
1008 # as it is SHELL that will show up the bogosity in the first place, but setting
1009 # it to anything else isn't really portable.
1011 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
1012 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
1022 # This is special to literate/, ToDo: add literate-specific
1023 # configure setup to literate/.
1028 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
1036 GTK_CONFIG = @GTK_CONFIG@
1038 # Set this if you want to use Inno Setup to build a Windows installer
1039 # when you make a bindist
1042 #-----------------------------------------------------------------------------
1045 XSLTPROC = @XsltprocCmd@
1046 XMLLINT = @XmllintCmd@
1048 XMLTEX = @XmltexCmd@
1049 PDFXMLTEX = @PdfxmltexCmd@
1052 DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
1054 XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
1055 --stringparam section.autolabel 1 \
1056 --stringparam section.label.includes.component.label 1
1058 #-----------------------------------------------------------------------------
1059 # FPtools support software
1064 # .NET support software
1072 GHC_PKG = @GhcPkgCmd@
1077 GREENCARD = @GreenCardCmd@
1078 GREENCARD_VERSION = @GreenCardVersion@
1084 HAPPY_VERSION = @HappyVersion@
1086 # Options to pass to Happy when we're going to compile the output with GHC
1088 GHC_HAPPY_OPTS = -agc
1090 # Temp. to work around performance problems in the HEAD around 8/12/2003,
1091 # A Happy compiled with this compiler needs more stack.
1092 SRC_HAPPY_OPTS = +RTS -K2m -RTS
1098 ALEX_VERSION = @AlexVersion@
1100 # Options to pass to Happy when we're going to compile the output with GHC
1107 HADDOCK = @HaddockCmd@
1110 # Options for compiling in different `ways'.
1112 # To configure up your own way, have a look at some of the standard ways
1113 # such as profiling, and create your own set of WAY_*_OPTS defs below.
1114 # After having done that, add your way string to WAYS, and after having
1115 # run the configure script, the different projects will add the new way
1116 # to the list of ways they support.
1120 # Definitions of the different ways:
1124 # - description, e.g., profiling
1125 # * what they mean to the driver:
1126 # - WAY_p_HC_OPTS gives the list of command-line options
1131 # The ways currently defined.
1133 ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
1134 USER_WAYS=a b c d e f g h j k l m n o A B
1137 # The following ways currently have treated specially, p u t mg,
1138 # as the driver script treats these guys specially and needs to carefully be told
1139 # about the options for these. Hence, we hide the required command line options
1140 # for these in the driver, as this is the only place they are needed.
1142 # If you want to add to these default options, fill in the variables below:
1146 WAY_i_HC_OPTS= -filx -fruntime-types
1149 WAY_p_NAME=profiling
1150 WAY_p_HC_OPTS= -prof
1153 WAY_t_NAME=ticky-ticky profiling
1154 WAY_t_HC_OPTS= -ticky
1157 WAY_u_NAME=unregisterized (using portable C only)
1158 WAY_u_HC_OPTS=-unreg
1161 WAY_mp_NAME=parallel
1162 WAY_mp_HC_OPTS=-parallel
1166 WAY_mg_HC_OPTS=-gransim
1169 # These ways apply to the RTS only:
1173 WAY_thr_NAME=threaded
1174 WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
1177 WAY_thr_p_NAME=threaded profiled
1178 WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
1181 WAY_debug_NAME=debug
1182 WAY_debug_HC_OPTS=-optc-DDEBUG
1185 WAY_debug_p_NAME=debug profiled
1186 WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
1189 WAY_debug_u_NAME=debug unregisterised
1190 WAY_debug_u_HC_OPTS=-optc-DDEBUG -unreg
1193 WAY_debug_t_NAME=debug ticky-ticky profiling
1194 WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
1197 WAY_thr_debug_NAME=threaded
1198 WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
1200 # Way 'thr_debug_p':
1201 WAY_thr_debug_p_NAME=threaded
1202 WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
1204 # Way 'dyn': build dynamic shared libraries
1206 WAY_dyn_HC_OPTS=-fPIC -dynamic
1207 WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
1210 WAY_thr_dyn_NAME=thr_dyn
1211 WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
1213 # Way 'thr_debug_dyn':
1214 WAY_thr_debug_dyn_NAME=thr_dyn
1215 WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
1218 WAY_debug_dyn_NAME=thr_dyn
1219 WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
1222 # Add user-way configurations here:
1272 ################################################################################
1274 # 31-bit-Int Core files
1276 ################################################################################
1279 # It is possible to configure the compiler and prelude to support 31-bit
1280 # integers, suitable for a back-end and RTS using a tag bit on a 32-bit
1281 # architecture. Currently the only useful output from this option is external Core
1282 # files. The following additions to your build.mk will produce the
1283 # 31-bit core output. Note that this is *not* just a library "way"; the
1284 # compiler must be built a special way too.
1286 # GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
1287 # GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
1288 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
1291 ################################################################################
1293 # Library configure arguments
1295 ################################################################################
1297 CONFIGURE_ARGS = @CONFIGURE_ARGS@