4 #################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 #################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 #################################################################################
43 # Project-wide platform variables
45 #################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what. (cygwin32 only).
92 #################################################################################
96 # Set of options applicable to all fptools projects
98 #################################################################################
101 # What parts to build: An fptools build tree does not have to be built
102 # all in one go. By setting the list of ProjectsToBuild in build.mk you can
103 # control which projects are built.
105 # Caution: the projects are built in the order given here, so if some
106 # projects use others you must list them in the correct order.
108 # Generally: * glafp-utils should be first
111 # then it's up to you
113 ProjectsToBuild = glafp-utils ghc hslibs
115 # Make a distinction between building and installing
117 ProjectsToInstall = glafp-utils ghc hslibs
120 # Should the various project tests directories be built?
122 IncludeTestDirsInBuild=NO
124 #################################################################################
128 # Set of (configurable) options needed by the ghc tree
129 # plus their default options (if any).
131 #################################################################################
133 #---------------------------------------------------------------
135 # Variables that control how the compiler itself is built
137 #---------------------------------------------------------------
139 # Specify the Haskell compiler to be used to compile the compiler itself
141 # WithGhcHc Path name of the compiler to use
143 # WithGhcHcType What "type" of compiler is being used
152 # Variable which is set to the version number of the $(WithGhcHc) we're using.
153 # Not currently used, but might come in handy sometime soon.
154 #WithGhcHcVersion = $(shell echo `if ( $(WithGhcHc) --version 2>/dev/null >/dev/null ) then $(WithGhcHc) --version 2>&1 | @SedCmd@ -e 's/^.*version [^0-9]*\([.0-9]*\).*/\1/;s/\.//'; else echo unknown; fi; ` )
156 # Extra ways in which to build the compiler (for example, you might want to
157 # build a profiled compiler so you can see where it spends its time)
160 # Extra option flags to pass to the compiler that compiles the compiler
161 # (Ones that are essential are wired into ghc/compiler/Makefile)
163 # -H25m allocate a bigger heap (might speed up compilation)
165 # -O compile an optimised compiler
167 # -DDEBUG include consistency/assertion checks in the compiled compiler
169 # -dcore-lint check the types after every pass of the compiler;
170 # a pretty strong internal check
173 # GhcWithHscBuiltViaC - build GHC compiler proper (\`hsc') from .hc files?
174 GhcWithHscBuiltViaC=@BootingFromHc@
176 # Build a registerised version of hsc and runtime
177 # (unregisterised used for Hugs at the moment)
178 GhcWithRegisterised=YES
180 # Build a compiler with a native code generator backend
181 # (as well as a C backend)
183 # Target platforms supported:
184 # i386, alpha & sparc
185 GhcWithNativeCodeGen=$(shell if (test x$(findstring $(HostArch_CPP),i386 alpha sparc) = x); then echo NO; else echo YES; fi)
188 # Building various ways?
189 # (right now, empty if not).
190 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
191 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
193 #---------------------------------------------------------------
195 # Variables that control how the prelude libraries and runtime system are built
197 # What extra ways to build the libraries in
198 # In addition to the normal sequential way, the default is to also build
199 # profiled prelude libraries.
200 # When booting from .hc files, turn this off.
201 ifeq "$(GhcWithHscBuiltViaC)" "YES"
207 # Option flags to pass to GHC when it's compiling prelude modules
208 # Typically these are things like -O or -dcore-lint
209 # The ones that are *essential* are wired into ghc/lib/Makefile
211 # -O is pretty desirable, otherwise no inlining of prelude
212 # things (incl "+") happens when compiling with this compiler
214 ifeq "$(GhcWithHscBuiltViaC)" "YES"
217 GhcLibHcOpts=-O -split-objs -odir $*
220 # Option flags to pass to GHC when it's compiling RTS modules
221 # This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
222 # GhcRtsHcOpts is used when compiling .hc files.
223 # GhcRtsCcOpts is used when compiling .c files.
226 GhcRtsCcOpts=-O2 -optc-fomit-frame-pointer
228 # Build the Haskell Readline bindings?
230 GhcLibsWithReadline=NO
232 # Include path to readline.h
233 # (no path == in standard include path)
236 HaveLibReadline=@HaveLibReadline@
238 # Strip local symbols from libraries? This can make the libraries smaller,
239 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
243 # Include compiler support for letting the compiler (optionally) report
244 # your compilation to a central server for generation of fun stats.
248 # Win32 only: Enable the RTS and libraries to be built as DLLs
250 EnableWin32DLLs=@EnableWin32DLLs@
252 #################################################################################
256 # Happy specific options
258 #################################################################################
260 # The compiler you'd like to use to compile Happy
261 WithHappyHc = @WithHc@
263 # HappyHcOpts gives the flags to pass to the Haskell compiler used
264 # to compile the Happy sources with.
268 #################################################################################
272 # Haggis specific options
274 #################################################################################
276 #################################################################################
280 # Green-card specific options
282 #################################################################################
284 #################################################################################
288 # nofib specific options
290 #################################################################################
293 # NoFibSubDirs controls which set of tests should be run
294 # You can run one or more of
302 NoFibSubDirs = imaginary spectral real
304 # The different ways to build nofib. Default is just to mirror
305 # what is done for the ghc prelude libraries.
307 NoFibWays = $(GhcLibWays)
309 # Haskell compiler options for nofib
312 # ==============================================================================
314 # END OF PROJECT-SPECIFIC STUFF
316 # Now come the generic configuration options
318 # ==============================================================================
320 #################################################################################
322 # Paths (see paths.mk)
324 #################################################################################
328 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
330 FPTOOLS_TOP_ABS = @hardtop@
333 # Installation directories, we don't use half of these,
334 # but since the configure script has them on offer while
335 # passing through, we might as well set them.
338 exec_prefix = @exec_prefix@
340 #UNUSED, see below: libexecdir = @libexecdir@
342 #sysconfdir = @datadir@
343 #sharedstatedir = @sharedstatedir@
344 #localstatedir = @localstatedir@
347 includedir = @includedir@
348 oldincludedir = @oldincludedir@
350 #UNUSED:srcdir = @srcdir@
353 # Default values for most of the above are only set if
354 # they weren't configured to anything in particular
355 # via the configure script. (i.e., we make no assumption
356 # that the autoconf-generated script will assign defaults
357 # to all of the above).
359 ifeq "$(strip $(exec_prefix))" ""
360 exec_prefix = $(prefix)
362 ifeq "$(strip $(bindir))" ""
363 bindir = $(exec_prefix)/bin
367 # NOTE: by intention, libexecdir and libdir point to
369 # => Only way to override this is to set libexecdir= on the command line.
370 # (NOTE: configure script setting is ignored).
371 libexecdir = $(libdir)
373 ifeq "$(strip $(datadir))" ""
374 datadir = $(prefix)/share
376 ifeq "$(strip $(libdir))" ""
377 libdir = $(exec_prefix)/lib
379 ifeq "$(strip $(infodir))" ""
380 infodir = $(prefix)/info
382 ifeq "$(strip $(includedir))" ""
383 includedir = $(prefix)/include
385 ifeq "$(strip $(oldincludedir))" ""
386 oldincludedir = /usr/include
388 ifeq "$(strip $(mandir))" ""
389 mandir = $(prefix)/man
393 #################################################################################
395 # Utilities programs: flags
397 #################################################################################
399 # If you want to give any standard flags to pretty much any utility
400 # (see utils.mk for a complete list), by adding a line here
404 # where P is the utility. For example, to add -O to all Haskell
410 #################################################################################
412 # Utilities programs: where to find them
414 #################################################################################
416 #-----------------------------------------------------------------------------
417 # FPtools Utility locations
419 # By default, the various utils needed to be build ghc and chums
420 # is set up to point to the utils/ directory. Define here the
421 # path prefix for the utilities. Notice that it's a prefix with
422 # a trailing slash, so that it can be concatenated directly on
423 # front of a program name; if it's not set then we just look
424 # along the shell's $(PATH)
426 # If instead you want to use installed or your own versions of these,
427 # override the various *_PREFIX in build.mk, i.e., having the following
432 # will force `make' to rummage around in your PATH to find `mkdependC' (not
433 # sure it would need it in the first place, but still).
435 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
437 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
438 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
439 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
440 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
441 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
442 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
443 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
444 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
445 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
446 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
449 LITERATE = $(FPTOOLS_TOP)/literate
451 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
452 INFO_PREFIX = $(FPTOOLS_TOP)/literate/info-utils/
453 TEXI2HTML_PREFIX = $(LITERATE_PREFIX)texi2html/
455 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
456 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
458 RTS_PREFIX = $(FPTOOLS_TOP)/common-rts/
460 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
461 UGEN_PREFIX = $(FPTOOLS_TOP)/ghc/utils/ugen/
462 STAT2RESID_PREFIX = $(FPTOOLS_TOP)/ghc/utils/stat2resid/
463 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
464 HSCPP_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hscpp/
465 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
468 #-----------------------------------------------------------------------------
469 # Haskell compiler and mkdependHS
471 # ToDo: $(HC) should be a local installation of some Haskell compiler
472 HC = $(FPTOOLS_TOP)/ghc/driver/ghc-inplace
475 #-----------------------------------------------------------------------------
481 WhatGccIsCalled = @WhatGccIsCalled@
482 ifeq "$(strip $(HaveGcc))" "YES"
483 ifneq "$(strip $(UseGcc))" "YES"
486 CC = $(WhatGccIsCalled)
490 #-----------------------------------------------------------------------------
491 # GMP Library (version 2.0.x or above)
493 HaveLibGmp = @HaveLibGmp@
496 #-----------------------------------------------------------------------------
500 # Don't bother with -lfl, we define our own yywrap()s anyway.
502 #WAS:FLEX_LIB = @LEXLIB@
504 #-----------------------------------------------------------------------------
505 # Other standard (ha!) Unix utilities
508 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
509 BASH = /usr/local/bin/bash
511 # Could be either gzip or compress
513 COMPRESS = @CompressCmd@
514 COMPRESS_SUFFIX = @CompressSuffix@
516 CONTEXT_DIFF = @ContextDiffCmd@
520 RAWCPP = $(CPP) -undef -traditional
523 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
524 # install-sh script (if chosen). This not terribly useful to us, so we convert
525 # it into an abs. path.
527 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
536 PREPROCESSCMD = $(CC) -E
543 # In emergency situations, REAL_SHELL is used to perform shell commands
544 # from within the ghc driver script, by scribbling the command line to
545 # a temp file and then having $(REAL_SHELL) execute it.
547 # The reason for having to do this is that overly long command lines
548 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
549 # 2.5.1), which is why this backdoor is provided. The situation of overly
550 # long command lines is either encountered while doing `make boot' in ghc/compiler,
551 # or when linking the compiler binary (`hsc').
553 # We do not use SHELL to execute long commands, as `make' will more than likely
554 # override whatever setting you have in your environment while executing.
556 # By default, REAL_SHELL is set equal SHELL, which is not really a smart move
557 # as it is SHELL that will show up the bogosity in the first place, but setting
558 # it to anything else isn't really portable.
560 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
561 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
571 # Under cygwin32, we have to deal with .exe suffixes
573 EXE_SUFFIX=@ExeSuffix@
576 # This is special to literate/, ToDo: add literate-specific
577 # configure setup to literate/.
582 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
590 #-----------------------------------------------------------------------------
591 # SGML stuff (currently not configured - we assume you have it)
593 SGML2LATEX = sgml2latex
594 SGML2HTML = sgml2html
595 SGML2INFO = sgml2info
598 #-----------------------------------------------------------------------------
599 # FPtools support software
601 # Stuff from fptools/glafp-utils
602 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
603 LTX = $(LTX_PREFIX)ltx
604 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
605 LNDIR = $(LNDIR_PREFIX)lndir
606 MSUB = $(MSUB_PREFIX)msub
607 ETAGS = $(ETAGS_PREFIX)etags
608 VERBATIM = $(VERBATIM_PREFIX)verbatim
609 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
610 SGML2LATEX = sgml2latex
611 RUNTEST = $(RUNTEST_PREFIX)runstdtest
613 HAPPY_VERSION = @HappyVersion@
615 GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
620 # Stuff from fptools/literate
622 INFO = $(UTIL_PREFIX)info
623 MAKEINFO = $(INFO_PREFIX)makeinfo
624 POSTMAKEINFO = $(INFO_PREFIX)postmakeinfo
625 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
626 LIT2TEXI = $(LITERATE_PREFIX)lit2texi
627 LIT2HTML = $(LITERATE_PREFIX)lit2html
628 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
629 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
630 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
631 LIT2TEXT = $(LITERATE_PREFIX)lit2text
632 TEXI2HTML = $(TEXI2HTML_PREFIX)texi2html
635 # Stuff from fptools/ghc/utils
637 UNLIT = $(UNLIT_PREFIX)unlit
638 UGEN = $(UGEN_PREFIX)ugen
639 STAT2RESID = $(STAT2RESID_PREFIX)stat2resid
640 HP2PS = $(HP2PS_PREFIX)hp2ps
641 HSCPP = $(HSCPP_PREFIX)hscpp
642 HSTAGS = $(HSTAGS_PREFIX)hstags
645 # Options for the compiling different `ways'. Various projects within
646 # the glorious fptools tree support building in various user-configured
647 # ways. For instance, you could set up one `way' such that the prelude
648 # libraries all were built with the option -ffoldr-build-on.
650 # To configure up your own way, have a look at some of the standard ways
651 # such as profiling, and create your own set of WAY_*_OPTS defs below.
652 # After having done that, add your way string to WAYS, and after having
653 # run the configure script, the different projects will add the new way
654 # to the list of ways they support.
658 # IMPORTANT! The WAYS variable configures the different `ways'
659 # you want to build a project (or maybe just parts of it, as is
660 # the case for ghc/). This variable is intended set inside the
661 # project mk setup, enforcing a global fptools WAYS is a bit too
662 # much (do you *really* want to build glafp-utils the profiled-concurrent
667 # Definitions of the different ways:
671 # - description, e.g., profiling
672 # * what they mean to the driver:
673 # - WAY_p_HC_OPTS gives the list of command-line options
678 # The ways currently defined.
680 ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
683 # The following ways currently have treated specially, p u t mg,
684 # as the driver script treats these guys specially and needs to carefully be told
685 # about the options for these. Hence, we hide the required command line options
686 # for these in the ghc/driver, as this is the only place they are needed.
688 # If you want to add to these default options, fill in the variables below:
695 WAY_t_NAME=ticky-ticky profiling
696 WAY_t_HC_OPTS= -ticky
699 WAY_u_NAME=unregisterized (using portable C only)
703 WAY_s_NAME=threads (for SMP)
708 WAY_mp_HC_OPTS=-parallel
712 WAY_mg_HC_OPTS=-gransim
715 WAY_dll_NAME=Win32 DLLs
719 # Add user-way configurations here: