4 ################################################################################
8 # This file supplies defaults for many tweakable build configuration
9 # options. Some of the defaults are filled in by the autoconf-generated
12 # DO NOT EDIT THIS FILE!
14 # - config.mk is auto-generated from config.mk.in by configure.
15 # This may be triggered automatically by the build system (say
16 # if config.mk.in has changed more recently than config.mk),
17 # so if you edit config.mk your changes will be spammed.
19 # - Settings in this file may be overriden by giving replacement
20 # definitions in build.mk. See build.mk.sample for a good
21 # starting point for a build.mk file.
23 # If you don't have a build.mk file then you get defaults for everything.
24 # The defaults should provide a reasonable vanilla build.
26 # This is one of only two files that configure generates (the other is config.h)
29 ifneq "$(findstring 3.7, $(MAKE_VERSION))" ""
30 ifeq "$(findstring 3.79.1, $(MAKE_VERSION))" ""
31 $(error GNU make version 3.79.1 or later is required.)
35 ################################################################################
40 # ProjectVersion is treated as a *string*
41 # ProjectVersionInt is treated as an *integer* (for cpp defines)
43 # Versioning scheme: A.B.C
44 # A: major version, decimal, any number of digits
45 # B: minor version, decimal, any number of digits
46 # C: patchlevel, one digit, omitted if zero.
48 # ProjectVersionInt does *not* contain the patchlevel (rationale: this
49 # figure is used for conditional compilations, and library interfaces
50 # etc. are not supposed to change between patchlevels).
52 # The ProjectVersionInt is included in interface files, and GHC
53 # checks that it's reading interface generated by the same ProjectVersion
54 # as itself. It does this even though interface file syntax may not
55 # change between versions. Rationale: calling conventions or other
56 # random .o-file stuff might change even if the .hi syntax doesn't
58 ProjectName = @ProjectName@
60 ProjectVersion = @ProjectVersion@$(ProjectTags)
61 ProjectVersionInt = @ProjectVersionInt@
62 ProjectPatchLevel = @ProjectPatchLevel@
64 ################################################################################
68 ################################################################################
70 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
71 # specifier. E.g. sparc-sun-solaris2
73 # Build platform: the platform on which we are doing this build
74 # Host platform: the platform on which these binaries will run
75 # Target platform: the platform for which this compiler will generate code
77 # We don't support build & host being different, because the build
78 # process creates binaries that are run during the build, and also
81 # If host & target are different, then we are building a compiler
82 # which will generate intermediate .hc files to port to the target
83 # architecture for bootstrapping. The libraries and stage 2 compiler
84 # will be built as HC files for the target system, and likely won't
85 # build on this host platform.
87 # An important invariant is that for any piece of source code, the
88 # platform on which the code is going to run is the HOST platform,
89 # and the platform on which we are building is the BUILD platform.
90 # Additionally for the compiler, the platform this compiler will
91 # generate code for is the TARGET. TARGET is not meaningful outside
92 # the compiler sources.
94 # Guidelines for when to use HOST vs. TARGET:
96 # - In the build system (Makefile, foo.mk), normally we should test
97 # $(HOSTPLATFORM). There are some cases (eg. installation), where
98 # we expect $(HOSTPLATFORM)==$(TARGETPLATFORM), so in those cases it
99 # doesn't matter which is used.
101 # - In the compiler itself, we should test HOST or TARGET depending
102 # on whether the conditional relates to the code being generated, or
103 # the platform on which the compiler is running. See the section
104 # on "Coding Style" in the commentary for more details.
106 # - In all other code, we should be testing HOST only.
108 # NOTE: cross-compiling is not well supported by the build system.
109 # You have to do a lot of work by hand to cross compile: see the
110 # section on "Porting GHC" in the Building Guide.
112 HOSTPLATFORM = @HostPlatform@
113 TARGETPLATFORM = @TargetPlatform@
114 BUILDPLATFORM = @BuildPlatform@
117 # in one or two places, we need to get at the OS version (major and
118 # perhaps even minor), HostOS_Full is the OS name reported by
119 # AC_CANONICAL_SYSTEM.
121 HostPlatform_CPP = @HostPlatform_CPP@
122 HostArch_CPP = @HostArch_CPP@
123 HostOS_CPP = @HostOS_CPP@
124 HostOS_Full = @HostOS_Full@
125 HostVendor_CPP = @HostVendor_CPP@
127 TargetPlatform_CPP = @TargetPlatform_CPP@
128 TargetArch_CPP = @TargetArch_CPP@
129 TargetOS_CPP = @TargetOS_CPP@
130 TargetVendor_CPP = @TargetVendor_CPP@
132 BuildPlatform_CPP = @BuildPlatform_CPP@
133 BuildArch_CPP = @BuildArch_CPP@
134 BuildOS_CPP = @BuildOS_CPP@
135 BuildVendor_CPP = @BuildVendor_CPP@
137 @HostPlatform_CPP@_HOST = 1
138 @TargetPlatform_CPP@_TARGET = 1
139 @BuildPlatform_CPP@_BUILD = 1
141 @HostArch_CPP@_HOST_ARCH = 1
142 @TargetArch_CPP@_TARGET_ARCH = 1
143 @BuildArch_CPP@_BUILD_ARCH = 1
145 @HostOS_CPP@_HOST_OS = 1
146 @TargetOS_CPP@_TARGET_OS = 1
147 @BuildOS_CPP@_BUILD_OS = 1
149 @HostVendor_CPP@_HOST_VENDOR = 1
150 @TargetVendor_CPP@_TARGET_VENDOR = 1
151 @BuildVendor_CPP@_BUILD_VENDOR = 1
153 ################################################################################
155 # Global configuration options
157 ################################################################################
159 # Leading underscores on symbol names in object files
160 # Valid options: YES/NO
162 LeadingUnderscore=@LeadingUnderscore@
164 # Pin a suffix on executables? If so, what (Windows only).
168 # Windows=YES if on a Windows platform
169 ifneq "$(findstring $(HostOS_CPP), mingw32 cygwin32)" ""
175 # BootingFromHc - build GHC and the libraries from .hc files?
176 BootingFromHc = @BootingFromHc@
178 # BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
179 # rather than registerised code, i.e., disable the mangler?
180 BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
183 # Which ways should DocBook XML documents be built?
184 # options are: dvi ps pdf html chm HxS
188 # Mac OS X deployment target (to cross-compile for older OS versions)
190 MACOSX_DEPLOYMENT_VERSION = @MACOSX_DEPLOYMENT_VERSION@
191 MACOSX_DEPLOYMENT_SDK = @MACOSX_DEPLOYMENT_SDK@
193 ifneq "$(MACOSX_DEPLOYMENT_VERSION)" ""
194 MACOSX_DEPLOYMENT_CC_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
195 -isysroot $(MACOSX_DEPLOYMENT_SDK)
196 MACOSX_DEPLOYMENT_LD_OPTS = -mmacosx-version-min=$(MACOSX_DEPLOYMENT_VERSION) \
197 -Wl,-syslibroot,$(MACOSX_DEPLOYMENT_SDK)
198 # We don't extend SRC_CC_OPTS and friends here directly, as (a) they may get
199 # overwritten in build.mk and (b) we must not use the deployment options in
200 # stage 1 or we get a linker error if the bootstrap compiler is for a more
204 ################################################################################
206 # Variables that control how the compiler itself is built
208 ################################################################################
210 # The compiler used to build GHC is $(GHC). To change the actual compiler
211 # used, re-configure with --with-ghc=<path-to-ghc>.
213 # Extra ways in which to build the compiler (for example, you might want to
214 # build a profiled compiler so you can see where it spends its time)
217 # Extra option flags to pass to the compiler that compiles the compiler
218 # (Ones that are essential are wired into compiler/Makefile)
219 # Typical options to use here:
221 # -DDEBUG include debugging code and assertions (will make the
222 # compiler slower and produce debugging output, but useful
225 # -dcore-lint check the types after every pass of the compiler;
226 # a pretty strong internal check of the compiler being
227 # used to compile GHC. Useful when bootstrapping.
228 GhcHcOpts=-Rghc-timing
230 # Extra options added to specific stages of the compiler bootstrap.
231 # These are placed later on the command line, and may therefore
232 # override options from $(GhcHcOpts).
240 # Build a compiler that will build *unregisterised* libraries and
241 # binaries by default. Unregisterised code is supposed to compile and
242 # run without any support for architecture-specific assembly mangling,
243 # register assignment or tail-calls, and is therefore a good way to get
244 # started when porting GHC to new architectures.
246 # If this is set to NO, you can still use the unregisterised way
247 # (way 'u') to get unregisterised code, but the default way will be
250 # NOTE: the stage1 compiler will be a registerised binary (assuming
251 # the compiler you build with is generating registerised binaries), but
252 # the stage2 compiler will be an unregisterised binary.
254 ifneq "$(findstring $(HostArch_CPP), alpha hppa)" ""
255 GhcUnregisterised=YES
260 # Build a compiler with a native code generator backend
261 # (as well as a C backend)
263 # Target platforms supported:
265 # sparc has bitrotted
266 # AIX is not supported
267 ArchSupportsNCG=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc)))
268 OsSupportsNCG=$(strip $(patsubst $(HostOS_CPP), YES, $(patsubst aix,,$(HostOS_CPP))))
270 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
271 GhcWithNativeCodeGen=$(strip\
272 $(if $(filter YESYESNO,\
273 $(OsSupportsNCG)$(ArchSupportsNCG)$(GhcUnregisterised)),YES,NO))
275 # Include support for generating Java
278 HaveLibDL = @HaveLibDL@
280 # ArchSupportsSMP should be set iff there is support for that arch in
282 ArchSupportsSMP=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 sparc powerpc)))
284 # lazy test, because $(GhcUnregisterised) might be set in build.mk later.
285 GhcWithSMP=$(strip $(if $(filter YESNO, $(ArchSupportsSMP)$(GhcUnregisterised)),YES,NO))
287 # Whether to include GHCi in the compiler. Depends on whether the RTS linker
288 # has support for this OS/ARCH combination.
290 OsSupportsGHCi=$(strip $(patsubst $(HostOS_CPP), YES, $(findstring $(HostOS_CPP), mingw32 cygwin32 linux solaris2 freebsd netbsd openbsd darwin)))
291 ArchSupportsGHCi=$(strip $(patsubst $(HostArch_CPP), YES, $(findstring $(HostArch_CPP), i386 x86_64 powerpc sparc sparc64)))
293 ifeq "$(OsSupportsGHCi)$(ArchSupportsGHCi)" "YESYES"
294 GhcWithInterpreter=YES
296 GhcWithInterpreter=NO
299 # GhcEnableTablesNextToCode tells us whether the target architecture
300 # supports placing info tables directly before the entry code
301 # (see TABLES_NEXT_TO_CODE in the RTS). Whether we actually compile for
302 # TABLES_NEXT_TO_CODE depends on whether we're building unregisterised
303 # code or not, which may be decided by options to the compiler later.
304 ifneq "$(findstring $(TargetArch_CPP)X, ia64X powerpc64X)" ""
305 GhcEnableTablesNextToCode=NO
307 GhcEnableTablesNextToCode=YES
310 # On Windows we normally want to make a relocatable bindist, to we
311 # ignore flags like libdir
312 ifeq "$(Windows)" "YES"
313 RelocatableBuild = YES
315 RelocatableBuild = NO
318 # When building bindists we set this to yes so that the binaries are as
319 # portable as possible.
323 # Building various ways?
324 # (right now, empty if not).
325 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
326 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
328 # Interface file version (hi-boot files only)
330 # A GHC built with HscIfaceFileVersion=n will look for
331 # M.hi-boot-n, and only then for
333 # (It'll be happy with the latter if the former doesn't exist.)
336 # This variable is used ONLY for hi-boot files. Its only purpose is
337 # to allow you to have a single directory with multiple .hi-boot files
338 # for the same module, each corresponding to a different version of
341 # HscIfaceFileVersion is propagated to hsc via
342 # compiler/main/Config.hs, which is automatically generated by
345 HscIfaceFileVersion=6
349 #------------------------------------------------------------------------------
350 # Options for Libraries
352 # Which directory (in libraries/) contains the integer library?
353 INTEGER_LIBRARY=integer-gmp
355 # What extra ways to build the libraries in
356 # In addition to the normal sequential way, the default is to also build
357 # profiled prelude libraries.
358 # When booting from .hc files, turn this off.
359 ifeq "$(BootingFromHc)" "YES"
365 # In addition, the RTS is built in some further variations. Ways that
369 # thr_p : threaded profiled
370 # debug : debugging (compile with -g for the C compiler, and -DDEBUG)
371 # debug_p : debugging profiled
372 # thr_debug : debugging threaded
373 # thr_debug_p : debugging threaded profiled
374 # t : ticky-ticky profiling
375 # debug_t : debugging ticky-ticky profiling
379 # Usually want the debug version
380 ifeq "$(BootingFromHc)" "NO"
384 # Want the threaded versions unless we're unregisterised
385 # Defer the check until later by using $(if..), because GhcUnregisterised might
386 # be set in build.mk, which hasn't been read yet.
387 GhcRTSWays += $(if $(findstring NO, $(GhcUnregisterised)),thr thr_p thr_debug,)
389 # We can only build GHCi threaded if we have a threaded RTS:
390 GhcThreaded = $(if $(findstring thr,$(GhcRTSWays)),YES,NO)
392 # Option flags to pass to GHC when it's compiling modules in
393 # fptools/libraries. Typically these are things like -O or
394 # -dcore-lint or -H32m. The ones that are *essential* are wired into
397 # -O is pretty desirable, otherwise no inlining of prelude
398 # things (incl "+") happens when compiling with this compiler
400 # -fgenerics switches on generation of support code for
401 # derivable type classes. This is now off by default,
402 # but we switch it on for the libraries so that we generate
403 # the code in case someone importing wants it
405 GhcLibHcOpts=-O -Rghc-timing -fgenerics
407 # Win32 only: Enable the RTS and libraries to be built as DLLs
408 DLLized=@EnableWin32DLLs@
410 # Strip local symbols from libraries? This can make the libraries smaller,
411 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
415 # These are the URL patterns that Haddock uses to generate the "Source
416 # File" links on each page.
417 PackageSourceURL = http://darcs.haskell.org/packages/$(PACKAGE)/%{FILE}
419 # ----------------------------------------------------------------------------
420 # Object-file splitting
422 # Set SplitObjs=YES or NO in your build.mk
424 # Don't use -split-objs in in GhcLibHcOpts, because the build
425 # system needs to do other special magic if you are
426 # doing object-file splitting
428 # lazy test, so that $(GhcUnregisterised) can be set in build.mk
429 SplitObjs=$(strip $(if $(filter $(TargetArch_CPP),i386 x86_64 powerpc sparc),\
430 $(if $(filter YES,$(BootingFromHC)),\
432 $(if $(filter NO,$(GhcUnregisterised)),\
440 # Build the ObjectIO ?
442 GhcLibsWithObjectIO=@GhcLibsWithObjectIO@
444 # .NET interop support?
446 DotnetSupport=@DotnetSupport@
448 # Build unix package?
450 GhcLibsWithUnix=@GhcLibsWithUnix@
452 # ----------------------------------------------------------------------------
453 # Options for GHC's RTS
455 # For an optimised RTS (you probably don't want to change these; we build
456 # a debugging RTS by default now. Use -debug to get it).
457 GhcRtsHcOpts=-optc-O2
458 GhcRtsCcOpts=-fomit-frame-pointer
460 # Include the front panel code? Needs GTK+.
461 GhcRtsWithFrontPanel = NO
463 # Include support for CPU performance counters via the PAPI library in the RTS?
464 # (PAPI: http://icl.cs.utk.edu/papi/)
466 HavePapi = @HavePapi@
468 ################################################################################
472 # nofib specific options
474 ################################################################################
476 WithNofibHc = $(GHC_INPLACE)
478 # NoFibSubDirs controls which set of tests should be run
479 # You can run one or more of
487 NoFibSubDirs = imaginary spectral real
489 # The different ways to build nofib. Default is just to mirror
490 # what is done for the ghc prelude libraries.
492 NoFibWays = $(GhcLibWays)
494 # Haskell compiler options for nofib
497 # Number of times to run each program
500 ################################################################################
502 # Paths (see paths.mk)
504 ################################################################################
506 # Directory used by GHC (and possibly other tools) for storing
507 # temporary files. If your TMPDIR isn't big enough, either override
508 # this in build.mk or set your environment variable "TMPDIR" to point
509 # to somewhere with more space. (TMPDIR=. is a good choice).
511 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
512 # override an environment variable with the value of the make variable
513 # of the same name (if it exists) when executing sub-processes, so
514 # setting the TMPDIR env var would have no effect in the build tree.
516 DEFAULT_TMPDIR = /tmp
517 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
518 DEFAULT_TMPDIR = /C/TEMP
520 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
521 DEFAULT_TMPDIR = /C/TEMP
524 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path.
525 # On Windows this is a c:/foo/bar style path.
526 FPTOOLS_TOP_ABS = @hardtop@
528 BIN_DIST_NAME=ghc-$(ProjectVersion)
529 BIN_DIST_TOPDIR_ABS=$(FPTOOLS_TOP_ABS)
530 BIN_DIST_DIR=$(BIN_DIST_TOPDIR_ABS)/$(BIN_DIST_NAME)
531 BIN_DIST_TARBALL=$(FPTOOLS_TOP_ABS)/$(BIN_DIST_NAME)-$(TARGETPLATFORM).tar.bz2
533 # Definition of installation directories, we don't use half of these, but since
534 # the configure script has them on offer while passing through, we might as well
535 # set them. Note that we have to be careful, because the GNU coding standards
536 # have changed a bit over the course of time, and autoconf development reflects
539 # A little bit of history regarding autoconf and GNU coding standards, use this
540 # as a cheat-sheet for the stuff below:
542 # variable | default < 2.60 | default >= 2.60
543 # ------------+--------------------+--------------------------------------
544 # exec_prefix | ${prefix} | ${prefix}
545 # libdir | ${exec_prefix}/lib | ${exec_prefix}/lib
546 # datarootdir | NONE! | ${prefix}/share
547 # datadir | ${prefix}/share | ${datarootdir}
548 # infodir | ${prefix}/info | ${datarootdir}/info
549 # mandir | ${prefix}/man | ${datarootdir}/man
550 # docdir | NONE! | ${datarootdir}/doc/${PACKAGE_TARNAME}
551 # htmldir | NONE! | ${docdir}
552 # dvidir | NONE! | ${docdir}
553 # pdfdir | NONE! | ${docdir}
554 # psdir | NONE! | ${docdir}
556 # NOTE: The default e.g. ${docdir} above means that autoconf substitutes the
557 # string "${docdir}", not the value of docdir! This is crucial for the GNU
560 # This gets used in the default docdir when autoconf >= 2.60 is used
561 PACKAGE_TARNAME := @PACKAGE_TARNAME@
565 # New autoconf (>= 2.60?) make a configure with a --datarootdir=DIR flag.
566 # However, in order to support older autoconf's we don't use it.
567 # datarootdir is set lower down instead.
568 # But, as datadir is defined in terms of datarootdir, we also need to
569 # set it to the value (if any) that configure gives it here.
570 datarootdir := @datarootdir@
572 exec_prefix := @exec_prefix@
574 datadir0 := @datadir@
576 includedir := @includedir@
578 dynlibdir := @libdir@
580 ifeq "$(RelocatableBuild)" "YES"
582 # Hack: our directory layouts tend to be different on Windows, so
583 # hack around configure's bogus assumptions here.
584 datarootdir := $(prefix)
588 docdir := $(prefix)/doc
596 # Unix: override libdir and datadir to put ghc-specific stuff in
597 # a subdirectory with the version number included.
598 datarootdir := $(datadir0)
599 datadir := $(datadir0)/ghc-$(ProjectVersion)
600 libdir := $(libdir0)/ghc-$(ProjectVersion)
602 # New autoconf (>= 2.60?) make a configure with --docdir=DIR etc flags.
603 # However, in order to support older autoconf's we don't use them.
606 #htmldir := @htmldir@
611 docdir := $(datarootdir)/doc/ghc
619 headerdir := $(libdir)/include
621 # Default place for putting interface files is $(libdir)
622 # (overriden for packages in package.mk)
625 # NOTE: by intention, libexecdir and libdir point to
627 # => Only way to override this is to set libexecdir= on the command line.
628 # (NOTE: configure script setting is ignored).
629 libexecdir = $(libdir)
631 # This is a bit of a lie, as this is a wrapper rather than the program
632 # itself. However, it means that we don't have to worry about Windows
633 # and non-Windows having different extensions.
634 GHC_PKG_PROG = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)/ghc-pkg-inplace
636 #-----------------------------------------------------------------------------
637 # install configuration
640 # Set this to have files installed with a specific owner
645 # Set this to have files installed with a specific group
650 # Invocations of `install' for the four different classes
653 INSTALL_PROGRAM = $(INSTALL) -m 755
654 INSTALL_SCRIPT = $(INSTALL) -m 755
655 INSTALL_SHLIB = $(INSTALL) -m 755
656 INSTALL_DATA = $(INSTALL) -m 644
657 INSTALL_HEADER = $(INSTALL) -m 644
658 INSTALL_MAN = $(INSTALL) -m 644
659 INSTALL_DIR = $(MKDIRHIER)
662 # runhaskell and hsc2hs are special, in that other compilers besides
663 # GHC might provide them. Systems with a package manager often come
664 # with tools to manage this kind of clash, e.g. RPM's
665 # update-alternatives. When building a distribution for such a system,
666 # we recommend setting both of the following to 'YES'.
668 # NO_INSTALL_RUNHASKELL = YES
669 # NO_INSTALL_HSC2HS = YES
671 # NB. we use negative tests here because for binary-distributions we cannot
672 # test build-time variables at install-time, so they must default to on.
674 # -----------------------------------------------------------------------------
675 # Utilities programs: flags
677 # If you want to give any standard flags to pretty much any utility
678 # (see utils.mk for a complete list), by adding a line here
682 # where P is the utility. For example, to add -O to all Haskell
687 SRC_HC_OPTS += -H16m -O
689 # These flags make flex 8-bit
692 # lint gets all CPP's flags too
693 SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
694 WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
696 # Default fptools options for dllwrap.
697 SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
699 # Flags for CPP when running GreenCard on .pgc files
700 GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
703 ################################################################################
705 # Layout of the source tree
707 ################################################################################
709 # Here we provide defines for the various directories in the source tree,
710 # so we can move things around more easily. A define $(GHC_FOO_DIR_REL)
711 # indicates a directory relative to the top of the source tree, whereas
712 # $(GHC_FOO_DIR) is a directory relative to the current directory.
713 # $(GHC_FOO_DIR_ABS) is the absolute path to the directory.
715 GHC_UTILS_DIR_REL = utils
716 GHC_INCLUDE_DIR_REL = includes
717 GHC_COMPILER_DIR_REL = compiler
718 GHC_RTS_DIR_REL = rts
719 GHC_UTILS_DIR_REL = utils
720 GHC_DRIVER_DIR_REL = driver
721 GHC_COMPAT_DIR_REL = compat
723 GHC_MKDEPENDC_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdependC
724 GHC_LTX_DIR_REL = $(GHC_UTILS_DIR_REL)/ltx
725 GHC_RUNTEST_DIR_REL = $(GHC_UTILS_DIR_REL)/runstdtest
726 GHC_LNDIR_DIR_REL = $(GHC_UTILS_DIR_REL)/lndir
727 GHC_MKDIRHIER_DIR_REL = $(GHC_UTILS_DIR_REL)/mkdirhier
728 GHC_DOCBOOK_DIR_REL = $(GHC_UTILS_DIR_REL)/docbook
729 GHC_UNLIT_DIR_REL = $(GHC_UTILS_DIR_REL)/unlit
730 GHC_HP2PS_DIR_REL = $(GHC_UTILS_DIR_REL)/hp2ps
731 GHC_HSTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/hasktags
732 GHC_GHCTAGS_DIR_REL = $(GHC_UTILS_DIR_REL)/ghctags
733 GHC_HSC2HS_DIR_REL = $(GHC_UTILS_DIR_REL)/hsc2hs
734 GHC_TOUCHY_DIR_REL = $(GHC_UTILS_DIR_REL)/touchy
735 GHC_PKG_DIR_REL = $(GHC_UTILS_DIR_REL)/ghc-pkg
736 GHC_GENPRIMOP_DIR_REL = $(GHC_UTILS_DIR_REL)/genprimopcode
737 GHC_GENAPPLY_DIR_REL = $(GHC_UTILS_DIR_REL)/genapply
739 GHC_MANGLER_DIR_REL = $(GHC_DRIVER_DIR_REL)/mangler
740 GHC_SPLIT_DIR_REL = $(GHC_DRIVER_DIR_REL)/split
741 GHC_SYSMAN_DIR_REL = $(GHC_RTS_DIR_REL)/parallel
743 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
744 GHC_INCLUDE_DIR = $(FPTOOLS_TOP)/$(GHC_INCLUDE_DIR_REL)
745 GHC_COMPILER_DIR = $(FPTOOLS_TOP)/$(GHC_COMPILER_DIR_REL)
746 GHC_RTS_DIR = $(FPTOOLS_TOP)/$(GHC_RTS_DIR_REL)
747 GHC_UTILS_DIR = $(FPTOOLS_TOP)/$(GHC_UTILS_DIR_REL)
748 GHC_DRIVER_DIR = $(FPTOOLS_TOP)/$(GHC_DRIVER_DIR_REL)
749 GHC_COMPAT_DIR = $(FPTOOLS_TOP)/$(GHC_COMPAT_DIR_REL)
751 GHC_MKDEPENDC_DIR = $(FPTOOLS_TOP)/$(GHC_MKDEPENDC_DIR_REL)
752 GHC_LTX_DIR = $(FPTOOLS_TOP)/$(GHC_LTX_DIR_REL)
753 GHC_RUNTEST_DIR = $(FPTOOLS_TOP)/$(GHC_RUNTEST_DIR_REL)
754 GHC_LNDIR_DIR = $(FPTOOLS_TOP)/$(GHC_LNDIR_DIR_REL)
755 GHC_MKDIRHIER_DIR = $(FPTOOLS_TOP)/$(GHC_MKDIRHIER_DIR_REL)
756 GHC_DOCBOOK_DIR = $(FPTOOLS_TOP)/$(GHC_DOCBOOK_DIR_REL)
757 GHC_UNLIT_DIR = $(FPTOOLS_TOP)/$(GHC_UNLIT_DIR_REL)
758 GHC_HP2PS_DIR = $(FPTOOLS_TOP)/$(GHC_HP2PS_DIR_REL)
759 GHC_HSTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_HSTAGS_DIR_REL)
760 GHC_GHCTAGS_DIR = $(FPTOOLS_TOP)/$(GHC_GHCTAGS_DIR_REL)
761 GHC_HSC2HS_DIR = $(FPTOOLS_TOP)/$(GHC_HSC2HS_DIR_REL)
762 GHC_TOUCHY_DIR = $(FPTOOLS_TOP)/$(GHC_TOUCHY_DIR_REL)
763 GHC_PKG_DIR = $(FPTOOLS_TOP)/$(GHC_PKG_DIR_REL)
764 GHC_GENPRIMOP_DIR = $(FPTOOLS_TOP)/$(GHC_GENPRIMOP_DIR_REL)
765 GHC_GENAPPLY_DIR = $(FPTOOLS_TOP)/$(GHC_GENAPPLY_DIR_REL)
767 GHC_MANGLER_DIR = $(FPTOOLS_TOP)/$(GHC_MANGLER_DIR_REL)
768 GHC_SPLIT_DIR = $(FPTOOLS_TOP)/$(GHC_SPLIT_DIR_REL)
769 GHC_SYSMAN_DIR = $(FPTOOLS_TOP)/$(GHC_SYSMAN_DIR_REL)
771 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
772 GHC_INCLUDE_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_INCLUDE_DIR_REL)
773 GHC_COMPILER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)
774 GHC_RTS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RTS_DIR_REL)
775 GHC_UTILS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_UTILS_DIR_REL)
776 GHC_DRIVER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DRIVER_DIR_REL)
777 GHC_COMPAT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_COMPAT_DIR_REL)
779 GHC_MKDEPENDC_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDEPENDC_DIR_REL)
780 GHC_LTX_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LTX_DIR_REL)
781 GHC_RUNTEST_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_RUNTEST_DIR_REL)
782 GHC_LNDIR_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_LNDIR_DIR_REL)
783 GHC_MKDIRHIER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MKDIRHIER_DIR_REL)
784 GHC_DOCBOOK_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_DOCBOOK_DIR_REL)
785 GHC_UNLIT_DIR = $(FPTOOLS_TOP_ABS)/$(GHC_UNLIT_DIR_REL)
786 GHC_HP2PS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HP2PS_DIR_REL)
787 GHC_HSTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSTAGS_DIR_REL)
788 GHC_GHCTAGS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GHCTAGS_DIR_REL)
789 GHC_HSC2HS_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_HSC2HS_DIR_REL)
790 GHC_TOUCHY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_TOUCHY_DIR_REL)
791 GHC_PKG_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_PKG_DIR_REL)
792 GHC_GENPRIMOP_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENPRIMOP_DIR_REL)
793 GHC_GENAPPLY_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_GENAPPLY_DIR_REL)
795 GHC_MANGLER_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_MANGLER_DIR_REL)
796 GHC_SYSMAN_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SYSMAN_DIR_REL)
797 GHC_SPLIT_DIR_ABS = $(FPTOOLS_TOP_ABS)/$(GHC_SPLIT_DIR_REL)
799 # -----------------------------------------------------------------------------
800 # Names of programs in the GHC tree
802 # xxx_PGM the name of an executable, without the path
803 # xxx the executable relative to the current dir
805 GHC_UNLIT_PGM = unlit$(exeext)
806 GHC_HP2PS_PGM = hp2ps
807 GHC_HSTAGS_PGM = hasktags
808 GHC_GHCTAGS_INPLACE_PGM = ghctags-inplace
809 GHC_HSC2HS_INPLACE_PGM = hsc2hs-inplace
810 GHC_TOUCHY_PGM = touchy$(exeext)
811 GHC_MANGLER_PGM = ghc-asm
812 GHC_SPLIT_PGM = ghc-split
813 GHC_SYSMAN_PGM = SysMan
814 GHC_PKG_INPLACE_PGM = ghc-pkg-inplace
815 GHC_GENPRIMOP_PGM = genprimopcode
816 GHC_GENAPPLY_PGM = genapply
817 GHC_MKDEPENDC_PGM = mkdependC
819 GHC_MKDIRHIER_PGM = mkdirhier
820 GHC_LNDIR_PGM = lndir
821 GHC_RUNTEST_PGM = runstdtest
823 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
831 UNLIT = $(GHC_UNLIT_DIR)/$(GHC_UNLIT_PGM)
832 HP2PS = $(GHC_HP2PS_DIR)/$(GHC_HP2PS_PGM)
833 HSTAGS = $(GHC_HSTAGS_DIR)/$(GHC_HSTAGS_PGM)
834 GHCTAGS_INPLACE = $(GHC_GHCTAGS_DIR)/$(GHC_GHCTAGS_INPLACE_PGM)
835 HSC2HS_INPLACE = $(GHC_HSC2HS_DIR)/$(GHC_HSC2HS_INPLACE_PGM)
836 MANGLER = $(GHC_MANGLER_DIR)/$(GHC_MANGLER_PGM)
837 SPLIT = $(GHC_SPLIT_DIR)/$(GHC_SPLIT_PGM)
838 SYSMAN = $(GHC_SYSMAN_DIR)/$(GHC_SYSMAN_PGM)
839 GHC_PKG_INPLACE = $(GHC_PKG_DIR)/$(GHC_PKG_INPLACE_PGM)
840 GENPRIMOP = $(GHC_GENPRIMOP_DIR)/$(GHC_GENPRIMOP_PGM)
841 GENAPPLY = $(GHC_GENAPPLY_DIR)/$(GHC_GENAPPLY_PGM)
842 MKDEPENDC = $(GHC_MKDEPENDC_DIR)/$(GHC_MKDEPENDC_PGM)
843 LTX = $(GHC_LTX_DIR)/$(GHC_LTX_PGM)
844 MKDIRHIER = $(GHC_MKDIRHIER_DIR)/$(GHC_MKDIRHIER_PGM)
845 LNDIR = $(GHC_LNDIR_DIR)/$(GHC_LNDIR_PGM)
846 RUNTEST = $(GHC_RUNTEST_DIR)/$(GHC_RUNTEST_PGM)
848 GENERATED_FILE = chmod a-w
849 EXECUTABLE_FILE = chmod +x
851 #-----------------------------------------------------------------------------
852 # Haskell compilers and mkdependHS
854 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
855 # compilers, if available.
857 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
858 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
860 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
861 # (because the version numbers have to be calculated).
864 GhcDir = $(dir $(GHC))
866 # Set to YES if $(GHC) has the editline package installed
867 GhcHasEditline = @GhcHasEditline@
872 # Sometimes we want to invoke ghc from the build tree in different
873 # places (eg. it's handy to have a nofib & a ghc build in the same
874 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
876 GHC_INPLACE = $(GHC_COMPILER_DIR)/ghc-inplace
877 GHC_STAGE1 = $(GHC_COMPILER_DIR)/stage1/ghc-inplace -no-user-package-conf
878 GHC_STAGE2 = $(GHC_COMPILER_DIR)/stage2/ghc-inplace -no-user-package-conf
879 GHC_STAGE3 = $(GHC_COMPILER_DIR)/stage3/ghc-inplace -no-user-package-conf
881 # NOTE: add -no-user-package-conf for stage 1-3 above, so that
882 # we avoid picking up any packages the user might happen to have
883 # installed for this GHC version. They are bound to be incompatible
884 # with the packages we built in the tree.
889 ifneq "$(findstring YES, $(UseStage1) $(BootingFromHc))" ""
891 # We are using the stage1 compiler to compile Haskell code, set up
892 # some variables appropriately:
894 MKDEPENDHS =$(GHC_STAGE1)
895 GhcVersion = @ProjectVersion@
896 GhcPatchLevel = @ProjectPatchLevel@
897 # oops, these are wrong:
898 GhcMajVersion = @GhcMajVersion@
899 GhcMinVersion = @GhcMinVersion@
904 else # not UseStage1 or BootingFromHc
908 GhcVersion = @GhcVersion@
909 GhcPatchLevel = @GhcPatchLevel@
910 GhcMajVersion = @GhcMajVersion@
911 GhcMinVersion = @GhcMinVersion@
913 # Some useful GHC version predicates:
914 ghc_ge_605 = @ghc_ge_605@
915 ghc_ge_607 = @ghc_ge_607@
918 # Canonicalised ghc version number, used for easy (integer) version
919 # comparisons. We must expand $(GhcMinVersion) to two digits by
920 # adding a leading zero if necessary:
921 ifneq "$(findstring $(GhcMinVersion), 0 1 2 3 4 5 6 7 8 9)" ""
922 GhcCanonVersion = $(GhcMajVersion)0$(GhcMinVersion)
924 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
927 #-----------------------------------------------------------------------------
930 # NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
931 # the flag --with-gcc=<blah> instead. The reason is that the configure script
932 # needs to know which gcc you're using in order to perform its tests.
936 WhatGccIsCalled = @WhatGccIsCalled@
937 GccVersion = @GccVersion@
938 ifeq "$(strip $(HaveGcc))" "YES"
939 ifneq "$(strip $(UseGcc))" "YES"
942 CC = $(WhatGccIsCalled)
943 GccDir = $(dir $(WhatGccIsCalled))
947 # default C compiler flags
948 SRC_CC_OPTS = @SRC_CC_OPTS@
950 ifeq "$(TARGETPLATFORM)" "ia64-unknown-linux"
954 #-----------------------------------------------------------------------------
955 # GMP Library (version 2.0.x or above)
957 HaveLibGmp = @HaveLibGmp@
960 GMP_INCLUDE_DIRS=@GMP_INCLUDE_DIRS@
961 GMP_LIB_DIRS=@GMP_LIB_DIRS@
963 #-----------------------------------------------------------------------------
964 # GMP framework (Mac OS X)
966 HaveFrameworkGMP = @HaveFrameworkGMP@
968 #-----------------------------------------------------------------------------
971 HaveLibMingwEx = @HaveLibMingwEx@
973 #-----------------------------------------------------------------------------
974 # Flex (currently unused, could be moved to glafp-utils)
977 # Don't bother with -lfl, we define our own yywrap()s anyway.
979 #WAS:FLEX_LIB = @LEXLIB@
981 #-----------------------------------------------------------------------------
982 # Other standard (ha!) Unix utilities
985 ArSupportsInput = @ArSupportsInput@
986 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
987 BASH = /usr/local/bin/bash
989 CONTEXT_DIFF = @ContextDiffCmd@
991 CPP = @CPP@ @CPPFLAGS@
994 # RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
995 # behave plausibly on Haskell sources.
997 RAWCPP_FLAGS = -undef -traditional
1002 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
1003 # install-sh script (if chosen). This not terribly useful to us, so we convert
1004 # it into an abs. path.
1006 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
1016 PYTHON = @PythonCmd@
1018 PREPROCESSCMD = $(CC) -E
1026 # Some ld's support the -x flag and some don't, so the configure
1027 # script detects which we have and sets LdXFlag to "-x" or ""
1031 # GNU ld supports input via a linker script, which is useful to avoid
1032 # overflowing command-line length limits.
1033 LdIsGNULd = @LdIsGNULd@
1036 # In emergency situations, REAL_SHELL is used to perform shell commands
1037 # from within the ghc driver script, by scribbling the command line to
1038 # a temp file and then having $(REAL_SHELL) execute it.
1040 # The reason for having to do this is that overly long command lines
1041 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
1042 # 2.5.1), which is why this backdoor is provided. The situation of overly
1043 # long command lines is either encountered while doing `make boot' in compiler/,
1044 # or when linking the compiler binary (`hsc').
1046 # We do not use SHELL to execute long commands, as `make' will more than likely
1047 # override whatever setting you have in your environment while executing.
1049 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
1050 # as it is SHELL that will show up the bogosity in the first place, but setting
1051 # it to anything else isn't really portable.
1053 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
1054 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
1063 HSCOLOUR = @HSCOLOUR@
1066 # This is special to literate/, ToDo: add literate-specific
1067 # configure setup to literate/.
1072 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
1080 GTK_CONFIG = @GTK_CONFIG@
1082 # Set this if you want to use Inno Setup to build a Windows installer
1083 # when you make a bindist
1086 #-----------------------------------------------------------------------------
1089 XSLTPROC = @XsltprocCmd@
1090 XMLLINT = @XmllintCmd@
1092 XMLTEX = @XmltexCmd@
1093 PDFXMLTEX = @PdfxmltexCmd@
1096 DIR_DOCBOOK_XSL = @DIR_DOCBOOK_XSL@
1098 XSLTPROC_LABEL_OPTS = --stringparam toc.section.depth 3 \
1099 --stringparam section.autolabel 1 \
1100 --stringparam section.label.includes.component.label 1
1102 #-----------------------------------------------------------------------------
1103 # FPtools support software
1108 # .NET support software
1116 GHC_PKG = @GhcPkgCmd@
1121 GREENCARD = @GreenCardCmd@
1122 GREENCARD_VERSION = @GreenCardVersion@
1128 HAPPY_VERSION = @HappyVersion@
1130 # Options to pass to Happy when we're going to compile the output with GHC
1132 GHC_HAPPY_OPTS = -agc --strict
1134 # Temp. to work around performance problems in the HEAD around 8/12/2003,
1135 # A Happy compiled with this compiler needs more stack.
1136 SRC_HAPPY_OPTS = +RTS -K2m -RTS
1142 ALEX_VERSION = @AlexVersion@
1144 # Options to pass to Happy when we're going to compile the output with GHC
1151 HADDOCK = @HaddockCmd@
1154 # Options for compiling in different `ways'.
1156 # To configure up your own way, have a look at some of the standard ways
1157 # such as profiling, and create your own set of WAY_*_OPTS defs below.
1158 # After having done that, add your way string to WAYS, and after having
1159 # run the configure script, the different projects will add the new way
1160 # to the list of ways they support.
1164 # Definitions of the different ways:
1168 # - description, e.g., profiling
1169 # * what they mean to the driver:
1170 # - WAY_p_HC_OPTS gives the list of command-line options
1175 # The ways currently defined.
1177 ALL_WAYS=p t s mp mg a b c d e f g h i j k l m n o A B
1178 USER_WAYS=a b c d e f g h j k l m n o A B
1181 # The following ways currently have treated specially, p t mg,
1182 # as the driver script treats these guys specially and needs to carefully be told
1183 # about the options for these. Hence, we hide the required command line options
1184 # for these in the driver, as this is the only place they are needed.
1186 # If you want to add to these default options, fill in the variables below:
1190 WAY_i_HC_OPTS= -filx -fruntime-types
1193 WAY_p_NAME=profiling
1194 WAY_p_HC_OPTS= -prof
1197 WAY_t_NAME=ticky-ticky profiling
1198 WAY_t_HC_OPTS= -ticky
1201 WAY_mp_NAME=parallel
1202 WAY_mp_HC_OPTS=-parallel
1206 WAY_mg_HC_OPTS=-gransim
1209 # These ways apply to the RTS only:
1213 WAY_thr_NAME=threaded
1214 WAY_thr_HC_OPTS=-optc-DTHREADED_RTS
1217 WAY_thr_p_NAME=threaded profiled
1218 WAY_thr_p_HC_OPTS=-optc-DTHREADED_RTS -prof
1221 WAY_debug_NAME=debug
1222 WAY_debug_HC_OPTS=-optc-DDEBUG
1225 WAY_debug_p_NAME=debug profiled
1226 WAY_debug_p_HC_OPTS=-optc-DDEBUG -prof
1229 WAY_debug_t_NAME=debug ticky-ticky profiling
1230 WAY_debug_t_HC_OPTS= -ticky -optc-DDEBUG
1233 WAY_thr_debug_NAME=threaded
1234 WAY_thr_debug_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG
1236 # Way 'thr_debug_p':
1237 WAY_thr_debug_p_NAME=threaded
1238 WAY_thr_debug_p_HC_OPTS=-optc-DTHREADED_RTS -optc-DDEBUG -prof
1240 # Way 'dyn': build dynamic shared libraries
1242 WAY_dyn_HC_OPTS=-fPIC -dynamic
1243 WAY_dyn_LIB_TARGET=libHSrts-gcc661.so
1246 WAY_thr_dyn_NAME=thr_dyn
1247 WAY_thr_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS
1249 # Way 'thr_debug_dyn':
1250 WAY_thr_debug_dyn_NAME=thr_dyn
1251 WAY_thr_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DTHREADED_RTS -optc-DDEBUG
1254 WAY_debug_dyn_NAME=thr_dyn
1255 WAY_debug_dyn_HC_OPTS=-fPIC -dynamic -optc-DDEBUG
1258 # Add user-way configurations here:
1308 ################################################################################
1310 # 31-bit-Int Core files
1312 ################################################################################
1315 # It is possible to configure the compiler and prelude to support 31-bit
1316 # integers, suitable for a back-end and RTS using a tag bit on a 32-bit
1317 # architecture. Currently the only useful output from this option is external Core
1318 # files. The following additions to your build.mk will produce the
1319 # 31-bit core output. Note that this is *not* just a library "way"; the
1320 # compiler must be built a special way too.
1322 # GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
1323 # GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
1324 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31
1327 ################################################################################
1329 # Library configure arguments
1331 ################################################################################
1333 CONFIGURE_ARGS = @CONFIGURE_ARGS@
1335 ################################################################################
1337 # Bindist testing directory
1339 ################################################################################
1341 ifeq "$(Windows)" "YES"
1342 BIN_DIST_INST_SUBDIR = "install dir"
1344 # I very much doubt that paths with spaces will work on Unix
1345 BIN_DIST_INST_SUBDIR = installed
1348 BIN_DIST_INST_DIR = $(FPTOOLS_TOP_ABS)/bindisttest/$(BIN_DIST_INST_SUBDIR)