4 ################################################################################
6 # config.mk.in-template
8 # This file defines all the variables that set the configuration of
12 ################################################################################
14 # The configuration is defined in two steps:
16 # 1. The builder (i.e. the person doing the build)
17 # copies this file, config.mk.in-template
20 # 2. S/he then edits it manually (gasp) to reflect any configuration
23 # 3. Then s/he runs "configure", which generates config.mk from
24 # config.mk.in, substituting for system/platform-dependent things
25 # enclosed in @at-signs@.
27 # This is one of only two files that configure generates (the other is config.h)
29 # Note that after subsequent edits of config.mk.in for a build, the configure script
30 # will have to be re-run manually to have the change reflected in config.mk.
33 # There is a section below for each project within the fptools suite
37 # a section corresponding to each of the main .mk files
38 # included by boilerplate.mk (see boilerplate.mk for a list).
41 ################################################################################
43 # Project-wide platform variables
45 ################################################################################
47 # A "platform" is the GNU cpu-type/manufacturer/operating-system target machine
48 # specifier. E.g. sparc-sun-solaris2
50 HOSTPLATFORM = @HostPlatform@
51 TARGETPLATFORM = @TargetPlatform@
52 BUILDPLATFORM = @HostPlatform@
55 # in one or two places, we need to get at the OS version (major and perhaps even minor),
56 # HostOS_Full is the OS name reported by AC_CANONICAL_SYSTEM.
58 HostPlatform_CPP = @HostPlatform_CPP@
59 HostArch_CPP = @HostArch_CPP@
60 HostOS_CPP = @HostOS_CPP@
61 HostOS_Full = @HostOS_Full@
62 HostVendor_CPP = @HostVendor_CPP@
65 # ToDo: check if these can be purged now. -- sof
68 @HostPlatform_CPP@_HOST = 1
69 @HostPlatform_CPP@_TARGET = 1
70 @HostPlatform_CPP@_BUILD = 1
72 @HostArch_CPP@_HOST_ARCH = 1
73 @HostArch_CPP@_TARGET_ARCH = 1
74 @HostArch_CPP@_BUILD_ARCH = 1
76 @HostOS_CPP@_HOST_OS = 1
77 @HostOS_CPP@_TARGET_OS = 1
78 @HostOS_CPP@_BUILD_OS = 1
80 @HostVendor_CPP@_HOST_VENDOR = 1
81 @HostVendor_CPP@_TARGET_VENDOR = 1
82 @HostVendor_CPP@_BUILD_VENDOR = 1
84 # Leading underscores on symbol names in object files
85 # Valid options: YES/NO
87 LeadingUnderscore=@LeadingUnderscore@
89 # Pin a suffix on executables? If so, what (Windows only).
92 ################################################################################
96 # Set of options applicable to all fptools projects
98 ################################################################################
100 # BootingFromHc - build GHC and the libraries from .hc files?
101 BootingFromHc = @BootingFromHc@
103 # BootingFromUnregisterisedHc - treat .hc files as containing unregisterised
104 # rather than registerised code, i.e., disable the mangler?
105 BootingFromUnregisterisedHc = @BootingFromUnregisterisedHc@
107 # build the libs first if we're bootstrapping from .hc files
108 ifeq "$(BootingFromHc)" "YES"
109 AllProjects = glafp-utils hslibs ghc green-card happy hdirect hood nofib
111 AllProjects = glafp-utils ghc hslibs green-card happy hdirect hood nofib
115 # (OPTIONAL) set ProjectsToBuild to a list of projects to be built. If this
116 # list is empty, then all projects present in the source tree will be built.
121 # set ProjectsDontInstall to a list of projects which are normally built but
124 ProjectsDontInstall = glafp-utils nofib
127 # Should the various project tests directories be built?
129 IncludeTestDirsInBuild=NO
132 # Which ways should SGML documents be built?
133 # options are: dvi ps pdf html rtf
137 ################################################################################
141 # Set of (configurable) options needed by the ghc tree
142 # plus their default options (if any).
144 ################################################################################
146 #---------------------------------------------------------------
148 # Variables that control how the compiler itself is built
150 #---------------------------------------------------------------
152 # The compiler used to build GHC is $(GHC). To change the actual compiler
153 # used, re-configure with --with-ghc=<path-to-ghc>.
155 # Extra ways in which to build the compiler (for example, you might want to
156 # build a profiled compiler so you can see where it spends its time)
159 # Extra option flags to pass to the compiler that compiles the compiler
160 # (Ones that are essential are wired into ghc/compiler/Makefile)
161 # Typical options to use here:
163 # -DDEBUG include debugging code and assertions (will make the
164 # compiler slower and produce debugging output, but useful
167 # -dcore-lint check the types after every pass of the compiler;
168 # a pretty strong internal check of the compiler being
169 # used to compile GHC. Useful when bootstrapping.
170 GhcHcOpts=-Rghc-timing
172 # Extra Haskell compiler options to use when compiling all Haskell
173 # *programs* (not libraries), including GHC itself.
174 # Typical options to use here:
176 # -H25m use a bigger heap (to speed up compilation)
178 # -O compile an optimised compiler
182 # Build a compiler that will build *unregisterised* libraries and
183 # binaries by default. Unregisterised code is supposed to compile and
184 # run without any support for architecture-specific assembly mangling,
185 # register assignment or tail-calls, and is therefore a good way to get
186 # started when porting GHC to new architectures.
188 # If this is set to NO, you can still use the unregisterised way
189 # (way 'u') to get unregisterised code, but the default way will be
192 # NOTE: this is not the same as building the compiler itself
193 # unregisterised. That's done by either (a) bootstrapping with a
194 # compiler that was built with GhcUnregisterized=YES, or (b)
195 # bootstrapping with a compiler that has way 'u' libraries, and the
196 # flag '-unreg' is added to GhcHcOpts above.
200 # Build a compiler with a native code generator backend
201 # (as well as a C backend)
203 # Target platforms supported:
205 ifneq "$(findstring $(HostArch_CPP), i386 sparc)" ""
206 GhcWithNativeCodeGen=YES
208 GhcWithNativeCodeGen=NO
211 # Include support for generating Java
214 HaveLibDL = @HaveLibDL@
216 # Include GHCi in the compiler. Default to NO for the time being.
218 ifneq "$(findstring $(HostOS_CPP), mingw32 linux solaris2 freebsd netbsd openbsd)" ""
219 GhcWithInterpreter=YES
220 ifeq "$(HaveLibDL)" "YES"
224 GhcWithInterpreter=NO
228 # Building various ways?
229 # (right now, empty if not).
230 BuildingParallel=$(subst mp,YES,$(filter mp,$(WAYS)))
231 BuildingGranSim=$(subst mg,YES,$(filter mg,$(WAYS)))
233 #------------------------------------------------------------------------------
234 # Options for GHC's Prelude
236 # What extra ways to build the libraries in
237 # In addition to the normal sequential way, the default is to also build
238 # profiled prelude libraries.
239 # When booting from .hc files, turn this off.
240 ifeq "$(BootingFromHc)" "YES"
246 # Option flags to pass to GHC when it's compiling prelude modules
247 # *and* standard library modules (std) *and* modules in hslibs
248 # Typically these are things like -O or -dcore-lint
249 # The ones that are *essential* are wired into ghc/lib/Makefile
251 # -O is pretty desirable, otherwise no inlining of prelude
252 # things (incl "+") happens when compiling with this compiler
254 GhcLibHcOpts=-O -Rghc-timing
256 # Win32 only: Enable the RTS and libraries to be built as DLLs
257 DLLized=@EnableWin32DLLs@
259 # Win32 only: are we building a compiler that tries to reduce external
260 # dependencies? i.e., one that doesn't assume that the user has got
261 # the cygwin toolchain installed on his/her Win32 box.
263 # GHC is still dependent on GNU tools in the backend (gcc to further process
264 # .c/.hc/.s/.o files + 'perl' to mangle and split), but using this
265 # option a GHC distribution can be put together which includes a minimal
266 # set of these open source tools.
268 MinimalUnixDeps=@MinimalUnixDeps@
270 # Don't split object files for libs if we're building DLLs, or booting from
274 ifeq "$(DLLized)" "YES"
277 ifeq "$(BootingFromHc)" "YES"
280 ifeq "$(GhcUnregisterised)" "YES"
284 # Strip local symbols from libraries? This can make the libraries smaller,
285 # but makes debugging somewhat more difficult. Doesn't work with all ld's.
289 # ----------------------------------------------------------------------------
290 # Options for GHC's RTS
292 # This is a good way to set things like -optc-g and -optc-DDEBUG for the RTS.
293 # GhcRtsHcOpts is used when compiling .hc files and .c files.
294 # GhcRtsCcOpts is used when compiling .c files only.
296 # For a debugging RTS:
297 # GhcRtsHcOpts = -optc-DDEBUG
300 # For an optimised RTS:
302 GhcRtsCcOpts=-O2 -fomit-frame-pointer
304 # Include the front panel code? Needs GTK+.
305 GhcRtsWithFrontPanel = NO
307 ################################################################################
311 ################################################################################
313 # Build HsLibs for which compiler?
315 # If $(HsLibsFor) == hugs or ghc, we assume we're building for the
316 # compiler/interpreter in the same source tree.
318 # HsLibsFor = ghc | hugs | nhc | hbc
321 # hslibs for GHC also uses the following variables (defined above):
322 # GhcLibWays, GhcLibHcOpts, GhcLibToolsHcOpts, DLLized, StripLibraries
324 # Build the Haskell Readline bindings?
326 GhcLibsWithReadline=@HaveReadlineHeaders@
328 # Libraries needed for linking with readline
329 LibsReadline=@LibsReadline@
331 # Include path to readline.h
332 # (no path == in standard include path)
339 # Build the Haskell OpenGL/GLUT binding?
341 GhcLibsWithHOpenGL=@GhcLibsWithHOpenGL@
346 ################################################################################
350 # Happy specific options
352 ################################################################################
354 # The compiler you'd like to use to compile Happy
355 WithHappyHc = @WithHc@
357 # HappyHcOpts gives the flags to pass to the Haskell compiler used
358 # to compile the Happy sources with.
362 ################################################################################
366 # Haggis specific options
368 ################################################################################
370 ################################################################################
374 # Green-card specific options
376 ################################################################################
378 ################################################################################
382 # nofib specific options
384 ################################################################################
386 WithNofibHc = $(GHC_INPLACE)
388 # NoFibSubDirs controls which set of tests should be run
389 # You can run one or more of
397 NoFibSubDirs = imaginary spectral real
399 # The different ways to build nofib. Default is just to mirror
400 # what is done for the ghc prelude libraries.
402 NoFibWays = $(GhcLibWays)
404 # Haskell compiler options for nofib
407 # ==============================================================================
409 # END OF PROJECT-SPECIFIC STUFF
411 # Now come the generic configuration options
413 # ==============================================================================
415 ################################################################################
417 # Paths (see paths.mk)
419 ################################################################################
421 # Directory used by GHC (and possibly other tools) for storing
422 # temporary files. If your TMPDIR isn't big enough, either override
423 # this in build.mk or set your environment variable "TMPDIR" to point
424 # to somewhere with more space. (TMPDIR=. is a good choice).
426 # DEFAULT_TMPDIR isn't called TMPDIR because GNU make tends to
427 # override an environment variable with the value of the make variable
428 # of the same name (if it exists) when executing sub-processes, so
429 # setting the TMPDIR env var would have no effect in the build tree.
431 DEFAULT_TMPDIR = /tmp
432 ifeq "$(TARGETPLATFORM)" "i386-unknown-cygwin32"
433 DEFAULT_TMPDIR = C:/TEMP
435 ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
436 DEFAULT_TMPDIR = C:/TEMP
439 # FPTOOLS_TOP: the top of the fptools hierarchy, absolute path. (POSIX / unix-style path).
440 FPTOOLS_TOP_ABS = @hardtop@
441 # The platform specific version of 'hardtop'.
442 FPTOOLS_TOP_ABS_PLATFORM = @hardtop_plat@
445 # Installation directories, we don't use half of these,
446 # but since the configure script has them on offer while
447 # passing through, we might as well set them.
450 exec_prefix = @exec_prefix@
454 #sysconfdir = @datadir@
455 #sharedstatedir = @sharedstatedir@
456 #localstatedir = @localstatedir@
457 ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
462 includedir = @includedir@
463 oldincludedir = @oldincludedir@
466 #UNUSED:infodir = @infodir@
467 #UNUSED:srcdir = @srcdir@
470 # override libdir and datadir to put project-specific stuff in
471 # a subdirectory with the version number included.
473 ifneq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
474 libdir = $(if $(ProjectNameShort),$(libdir0)/$(ProjectNameShort)-$(ProjectVersion),$(libdir0))
475 datadir = $(if $(ProjectNameShort),$(datadir0)/$(ProjectNameShort)-$(ProjectVersion),$(datadir0))
478 datadir = $(datadir0)
482 # Default values for most of the above are only set if
483 # they weren't configured to anything in particular
484 # via the configure script. (i.e., we make no assumption
485 # that the autoconf-generated script will assign defaults
486 # to all of the above).
488 ifeq "$(strip $(exec_prefix))" ""
489 exec_prefix = $(prefix)
491 ifeq "$(strip $(bindir))" ""
492 bindir = $(exec_prefix)/bin
496 # NOTE: by intention, libexecdir and libdir point to
498 # => Only way to override this is to set libexecdir= on the command line.
499 # (NOTE: configure script setting is ignored).
500 libexecdir = $(libdir)
502 ifeq "$(strip $(datadir))" ""
503 datadir = $(prefix)/share
505 ifeq "$(strip $(libdir))" ""
506 libdir = $(exec_prefix)/lib
508 ifeq "$(strip $(includedir))" ""
509 includedir = $(prefix)/include
511 ifeq "$(strip $(oldincludedir))" ""
512 oldincludedir = /usr/include
514 ifeq "$(strip $(mandir))" ""
515 mandir = $(prefix)/man
519 ################################################################################
521 # Utilities programs: flags
523 ################################################################################
525 # If you want to give any standard flags to pretty much any utility
526 # (see utils.mk for a complete list), by adding a line here
530 # where P is the utility. For example, to add -O to all Haskell
535 # These flags make flex 8-bit
538 SRC_INSTALL_BIN_OPTS += -s
540 # lint gets all CPP's flags too
541 SRC_LINT_OPTS += -axz -DLINT $(SRC_CPP_OPTS)
542 WAY$(_way)_LINT_OPTS += WAY$(_way)_CPP_OPTS
544 # Default fptools options for dllwrap.
545 SRC_BLD_DLL_OPTS += -mno-cygwin --target=i386-mingw32
547 # Flags for CPP when running GreenCard on .pgc files
548 GC_CPP_OPTS += -P -E -x c -traditional -D__GLASGOW_HASKELL__
551 ################################################################################
553 # Utilities programs: where to find them
555 ################################################################################
557 #-----------------------------------------------------------------------------
558 # FPtools Utility locations
560 # By default, the various utils needed to be build ghc and chums
561 # is set up to point to the utils/ directory. Define here the
562 # path prefix for the utilities. Notice that it's a prefix with
563 # a trailing slash, so that it can be concatenated directly on
564 # front of a program name; if it's not set then we just look
565 # along the shell's $(PATH)
567 # If instead you want to use installed or your own versions of these,
568 # override the various *_PREFIX in build.mk, i.e., having the following
573 # will force `make' to rummage around in your PATH to find `mkdependC' (not
574 # sure it would need it in the first place, but still).
576 GLAFP_UTILS = $(FPTOOLS_TOP)/glafp-utils
578 SCRIPT_PREFIX = $(GLAFP_UTILS)/scripts/
579 MKDEPENDC_PREFIX = $(GLAFP_UTILS)/mkdependC/
580 LTX_PREFIX = $(GLAFP_UTILS)/ltx/
581 RUNTEST_PREFIX = $(GLAFP_UTILS)/runstdtest/
582 VERBATIM_PREFIX = $(GLAFP_UTILS)/verbatim/
583 SGMLVERB_PREFIX = $(GLAFP_UTILS)/sgmlverb/
584 ETAGS_PREFIX = $(GLAFP_UTILS)/etags/
585 MSUB_PREFIX = $(GLAFP_UTILS)/msub/
586 LNDIR_PREFIX = $(GLAFP_UTILS)/lndir/
587 MKDIRHIER_PREFIX = $(GLAFP_UTILS)/mkdirhier/
588 DOCBOOK_PREFIX = $(GLAFP_UTILS)/docbook/
590 LITERATE_PREFIX = $(FPTOOLS_TOP)/literate/
592 HAPPY_PREFIX = $(FPTOOLS_TOP)/happy/src/
593 GREENCARD_PREFIX = $(FPTOOLS_TOP)/green-card/src/
595 UNLIT_PREFIX = $(FPTOOLS_TOP)/ghc/utils/unlit/
596 HP2PS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hp2ps/
597 HSTAGS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hstags/
598 HSC2HS_PREFIX = $(FPTOOLS_TOP)/ghc/utils/hsc2hs/
600 #-----------------------------------------------------------------------------
601 # Haskell compilers and mkdependHS
603 # $(GHC), $(HBC) and $(NHC) point to installed versions of the relevant
604 # compilers, if available.
606 # $(HC) is a generic Haskell 98 compiler, set to $(GHC) by default.
607 # $(MKDEPENDHS) is the Haskell dependency generator (ghc -M).
609 # NOTE: Don't override $(GHC) in build.mk, use configure --with-ghc instead
610 # (because the version numbers have to be calculated).
613 GhcVersion = @GhcVersion@
614 GhcMajVersion = @GhcMajVersion@
615 GhcMinVersion = @GhcMinVersion@
616 GhcPatchLevel = @GhcPatchLevel@
617 # Canonicalised ghc version number, used for easy (integer) version comparisons.
618 GhcCanonVersion = $(GhcMajVersion)$(GhcMinVersion)
626 # Sometimes we want to invoke ghc from the build tree in different
627 # projects (eg. it's handy to have a nofib & a ghc build in the same
628 # tree). We can refer to "this ghc" as $(GHC_INPLACE):
630 GHC_INPLACE = $(FPTOOLS_TOP)/ghc/compiler/ghc-inplace
632 #-----------------------------------------------------------------------------
635 # NB. Don't override $(WhatGccIsCalled) using build.mk, re-configure using
636 # the flag --with-gcc=<blah> instead. The reason is that the configure script
637 # needs to know which gcc you're using in order to perform its tests.
641 WhatGccIsCalled = @WhatGccIsCalled@
642 ifeq "$(strip $(HaveGcc))" "YES"
643 ifneq "$(strip $(UseGcc))" "YES"
646 CC = $(WhatGccIsCalled)
650 # default C compiler flags
651 SRC_CC_OPTS = @SRC_CC_OPTS@
653 #-----------------------------------------------------------------------------
654 # GMP Library (version 2.0.x or above)
656 HaveLibGmp = @HaveLibGmp@
659 #-----------------------------------------------------------------------------
661 # (if present in libc use that one, otherwise use the one in the tree)
663 HaveRegex = @HaveRegex@
665 #-----------------------------------------------------------------------------
668 GTK_CONFIG = @GTK_CONFIG@
669 GTK_VERSION = @GTK_VERSION@
671 #-----------------------------------------------------------------------------
675 # Don't bother with -lfl, we define our own yywrap()s anyway.
677 #WAS:FLEX_LIB = @LEXLIB@
679 #-----------------------------------------------------------------------------
680 # Other standard (ha!) Unix utilities
683 ArSupportsInput = @ArSupportsInput@
684 # Yuckage: for ghc/utils/parallel -- todo: nuke this dependency!!
685 BASH = /usr/local/bin/bash
687 # Could be either gzip or compress
689 COMPRESS = @CompressCmd@
690 COMPRESS_SUFFIX = @CompressSuffix@
692 CONTEXT_DIFF = @ContextDiffCmd@
694 CPP = @CPP@ @CPPFLAGS@
697 # RAWCPP_FLAGS are the flags to give to cpp (viz, gcc -E) to persuade it to
698 # behave plausibly on Haskell sources.
700 RAWCPP_FLAGS = -undef -traditional
704 # Sigh - the autoconf macro for INSTALL will subst a relative path to the fallback
705 # install-sh script (if chosen). This not terribly useful to us, so we convert
706 # it into an abs. path.
708 INSTALL := $(subst .././install-sh,$(FPTOOLS_TOP_ABS)/install-sh,$(INSTALL))
719 PREPROCESSCMD = $(CC) -E
726 # Some ld's support the -x flag and some don't, so the configure
727 # script detects which we have and sets LdXFlag to "-x" or ""
733 # In emergency situations, REAL_SHELL is used to perform shell commands
734 # from within the ghc driver script, by scribbling the command line to
735 # a temp file and then having $(REAL_SHELL) execute it.
737 # The reason for having to do this is that overly long command lines
738 # cause unnecessary trouble with some shells (e.g., /bin/sh on Solaris
739 # 2.5.1), which is why this backdoor is provided. The situation of overly
740 # long command lines is either encountered while doing `make boot' in ghc/compiler,
741 # or when linking the compiler binary (`hsc').
743 # We do not use SHELL to execute long commands, as `make' will more than likely
744 # override whatever setting you have in your environment while executing.
746 # By default, REAL_SHELL is set equal to SHELL, which is not really a smart move
747 # as it is SHELL that will show up the bogosity in the first place, but setting
748 # it to anything else isn't really portable.
750 # ====> If long command lines cause you trouble, invoke `ghc' (via `make' or otherwise)
751 # with REAL_SHELL set to something else than /bin/sh, for instance, your favourite
761 # Under Windows, we have to deal with .exe suffixes
766 # This is special to literate/, ToDo: add literate-specific
767 # configure setup to literate/.
772 TGRIND_HELPER = /usr/local/lib/tgrind/tfontedpr # XXX
780 #-----------------------------------------------------------------------------
785 SGML2DVI = $(DOCBOOK_PREFIX)db2dvi
786 SGML2HTML = $(DOCBOOK_PREFIX)db2html
787 SGML2PS = $(DOCBOOK_PREFIX)db2ps
788 SGML2PDF = $(DOCBOOK_PREFIX)db2pdf
789 SGML2RTF = $(DOCBOOK_PREFIX)db2rtf
791 SGMLSTYLESHEET = $(FPTOOLS_TOP_ABS)/docs/fptools-both.dsl
793 SRC_SGML2DVI_OPTS = -d $(SGMLSTYLESHEET)
794 SRC_SGML2HTML_OPTS = -d $(SGMLSTYLESHEET)
795 SRC_SGML2PS_OPTS = -d $(SGMLSTYLESHEET)
796 SRC_SGML2RTF_OPTS = -d $(SGMLSTYLESHEET)
797 SRC_SGML2PDF_OPTS = -d $(SGMLSTYLESHEET)
799 DOCBOOK_CATALOG = @Catalog@
801 #-----------------------------------------------------------------------------
802 # FPtools support software
804 # Stuff from fptools/glafp-utils
805 MKDEPENDC = $(MKDEPENDC_PREFIX)mkdependC
806 LTX = $(LTX_PREFIX)ltx
807 MKDIRHIER = $(MKDIRHIER_PREFIX)mkdirhier
808 LNDIR = $(LNDIR_PREFIX)lndir
809 MSUB = $(MSUB_PREFIX)msub
810 ETAGS = $(ETAGS_PREFIX)etags
811 VERBATIM = $(VERBATIM_PREFIX)verbatim
812 SGMLVERB = $(SGMLVERB_PREFIX)sgmlverb
813 RUNTEST = $(RUNTEST_PREFIX)runstdtest
815 GREENCARD = $(FPTOOLS_TOP)/green-card/src/green-card
820 # .NET support software
829 HAPPY_VERSION = @HappyVersion@
831 # Options to pass to Happy when we're going to compile the output with GHC
833 GHC_HAPPY_OPTS = @HappyOpts@
836 # Stuff from fptools/literate
838 LIT2PGM = $(LITERATE_PREFIX)lit2pgm
839 LIT2HTML = $(LITERATE_PREFIX)lit2html
840 LIT2LATEX = $(LITERATE_PREFIX)lit2latex
841 MKDEPENDLIT = $(LITERATE_PREFIX)mkdependlit
842 LIT2CHANGELOG = $(LITERATE_PREFIX)lit2changelog
843 LIT2TEXT = $(LITERATE_PREFIX)lit2text
846 # Stuff from fptools/ghc/utils
848 UNLIT = $(UNLIT_PREFIX)unlit$(EXE_SUFFIX)
849 HP2PS = $(HP2PS_PREFIX)hp2ps$(EXE_SUFFIX)
850 HSTAGS = $(HSTAGS_PREFIX)hstags
851 HSC2HS = $(HSC2HS_PREFIX)hsc2hs-inplace
854 # Options for the compiling different `ways'. Various projects within
855 # the glorious fptools tree support building in various user-configured
856 # ways. For instance, you could set up one `way' such that the prelude
857 # libraries all were built with the option -ffoldr-build-on.
859 # To configure up your own way, have a look at some of the standard ways
860 # such as profiling, and create your own set of WAY_*_OPTS defs below.
861 # After having done that, add your way string to WAYS, and after having
862 # run the configure script, the different projects will add the new way
863 # to the list of ways they support.
867 # IMPORTANT! The WAYS variable configures the different `ways'
868 # you want to build a project (or maybe just parts of it, as is
869 # the case for ghc/). This variable is intended set inside the
870 # project mk setup, enforcing a global fptools WAYS is a bit too
871 # much (do you *really* want to build glafp-utils the profiled-concurrent
876 # Definitions of the different ways:
880 # - description, e.g., profiling
881 # * what they mean to the driver:
882 # - WAY_p_HC_OPTS gives the list of command-line options
887 # The ways currently defined.
889 ALL_WAYS=p t u s mp mg a b c d e f g h i j k l m n o A B
890 USER_WAYS=a b c d e f g h j k l m n o A B
893 # The following ways currently have treated specially, p u t mg,
894 # as the driver script treats these guys specially and needs to carefully be told
895 # about the options for these. Hence, we hide the required command line options
896 # for these in the ghc/driver, as this is the only place they are needed.
898 # If you want to add to these default options, fill in the variables below:
902 WAY_i_HC_OPTS= -filx -fruntime-types
909 WAY_t_NAME=ticky-ticky profiling
910 WAY_t_HC_OPTS= -ticky
913 WAY_u_NAME=unregisterized (using portable C only)
917 WAY_s_NAME=threads (for SMP)
922 WAY_mp_HC_OPTS=-parallel
926 WAY_mg_HC_OPTS=-gransim
929 # Add user-way configurations here:
979 ################################################################################
981 # 31-bit-Int Core files
983 ################################################################################
986 # It is possible to configure the compiler and prelude to support 31-bit
987 # integers, suitable for a back-end and RTS using a tag bit on a 32-bit
988 # architecture. Currently the only useful output from this option is external Core
989 # files. The following additions to your build.mk will produce the
990 # 31-bit core output. Note that this is *not* just a library "way"; the
991 # compiler must be built a special way too.
993 # GhcCppOpts +=-DWORD_SIZE_IN_BITS=31
994 # GhcLibHcOpts +=-fext-core -fno-code -DWORD_SIZE_IN_BITS=31
995 # GhcLibCppOpts += -DWORD_SIZE_IN_BITS=31