1 #################################################################################
5 # This file defines Make variables for standard directories
8 #################################################################################
11 #-----------------------------------------------------------------
16 #-----------------------------------------------------------------------------
17 # install configuration
19 # The install standard target is guided by the following four variables
21 # INSTALL_PROGS (installed in $(bindir))
22 # INSTALL_LIBS (installed in $(libdir))
23 # INSTALL_LIBEXECS (installed in $(libexecdir))
24 # INSTALL_DATAS (installed in $(datadir))
25 # INSTALL_IFACES (installed in $(ifacedir))
27 # see target.mk for more information.
31 # Setting user/group ownership for the installed entities
33 # this stuff about "who" does the installing doesn't have make vars
34 # as it is not intended to be run-time changeable.
37 INSTALL_OWNER = -o $(OWNER)
43 INSTALL_GROUP = -g $(GROUP)
48 SRC_INSTALL_OPTS += $(INSTALL_OWNER) $(INSTALL_GROUP)
51 # Invocations of `install' for the four different classes
55 INSTALL_PROGRAM = $(INSTALL) -m 755
56 INSTALL_SCRIPT = $(INSTALL) -m 755
57 INSTALL_SHLIB = $(INSTALL) -m 755
58 INSTALL_DATA = $(INSTALL) -m 644
59 INSTALL_DIR = $(FPTOOLS_TOP)/glafp-utils/mkdirhier/mkdirhier
62 # The install variables does not have any defaults,
63 # what files to install have to be specified in the Makefiles.
66 #################################################################################
68 # Standard variable names
70 #################################################################################
71 # The fptools mk setup defines a set of standard names which are used
72 # by the standard targets provided by mk. One example of this is the
73 # use of standard names for specifying what files to compile, their
74 # intermediate/object code, and the name of the final
75 # executable. Based on the settings of these variables, the standard
76 # targets will generate/expand rules that automatically compile and
81 # SRCS - sources, might be prefixed to indicate what type of source
83 # OBJS - object files (possibly prefixed).
85 # PROG - name of final executable
87 # We attempt to automatically devine the list of sources $(SRCS) to
88 # compile by looking in the current directory (and possibly other
89 # directories which may be specified by setting the $(ALL_DIRS)
90 # variable). This is complicated by the fact that some files are
91 # derived from other files: eg. .hsc files give rise to -hsc.c and
92 # -hsc.h files, .ly files give rise to .hs files, and .hs files give
93 # rise to .hc files sometimes.
95 # So we figure out the sources in three stages: first figure out what
96 # sources we can find (this is $(ALL_SRCS)). Then figure out all the
97 # "derived" sources (eg. A.hsc generates A.hs and A_hsc.c), and
98 # finally put all these together and remove duplicates (GNU make's
99 # handy sort function does the duplicate removing).
101 # HS_SRCS: list of Haskell modules you want to compile.
102 # (also use by depend rule).
103 # HS_OBJS: list of corresponding object files
104 # HS_PROG: program that is ultimately linked.
105 # HS_IFACES: list of interface files generated
106 # (caveat: assuming no funny use of -hisuf and that
107 # file name and module name match)
109 ALL_SRCS = $(wildcard $(patsubst ./%, %, \
110 $(patsubst %,%/*.hs, . $(ALL_DIRS)) \
111 $(patsubst %,%/*.lhs, . $(ALL_DIRS)) \
112 $(patsubst %,%/*.y, . $(ALL_DIRS)) \
113 $(patsubst %,%/*.ly, . $(ALL_DIRS)) \
114 $(patsubst %,%/*.c, . $(ALL_DIRS)) \
115 $(patsubst %,%/*.hc, . $(ALL_DIRS)) \
116 $(patsubst %,%/*.S, . $(ALL_DIRS)) \
117 $(patsubst %,%/*.prl, . $(ALL_DIRS)) \
118 $(patsubst %,%/*.lprl, . $(ALL_DIRS)) \
119 $(patsubst %,%/*.lit, . $(ALL_DIRS)) \
120 $(patsubst %,%/*.verb, . $(ALL_DIRS)) \
121 $(patsubst %,%/*.hsc, . $(ALL_DIRS)) \
124 # ALL_SRCS is computed once and for all into PRE_SRCS at the top of
125 # target.mk. Otherwise, we end up re-computing ALL_SRCS every time it
126 # is expanded (it is used in several variables below, and these
127 # variables are used in several others, etc.), which can really slow
130 PRE_HS_SRCS = $(filter %.hs, $(PRE_SRCS))
131 PRE_LHS_SRCS = $(filter %.lhs, $(PRE_SRCS))
133 HSC_SRCS = $(filter %.hsc, $(PRE_SRCS))
134 HAPPY_Y_SRCS = $(filter %.y, $(PRE_SRCS))
135 HAPPY_LY_SRCS = $(filter %.ly, $(PRE_SRCS))
136 HAPPY_SRCS = $(HAPPY_Y_SRCS) $(HAPPY_LY_SRCS)
138 DERIVED_HSC_SRCS = $(patsubst %.hsc, %.hs, $(HSC_SRCS)) \
139 $(patsubst %.hsc, %_hsc.c, $(HSC_SRCS)) \
140 $(patsubst %.hsc, %_hsc.h, $(HSC_SRCS)) \
141 $(patsubst %.hsc, %.hc, $(HSC_SRCS))
143 DERIVED_HAPPY_SRCS = $(patsubst %.y, %.hs, $(HAPPY_Y_SRCS)) \
144 $(patsubst %.ly, %.hs, $(HAPPY_LY_SRCS))
146 DERIVED_HC_SRCS = $(patsubst %.hs, %.hc, $(PRE_HS_SRCS)) \
147 $(patsubst %.lhs, %.hc, $(PRE_LHS_SRCS))
149 DERIVED_SRCS = $(DERIVED_HSC_SRCS) \
150 $(DERIVED_HAPPY_SRCS) \
153 # EXCLUDED_SRCS can be set in the Makefile, otherwise it defaults to empty.
154 EXCLUDED_HSC_SRCS = $(filter %.hsc, $(EXCLUDED_SRCS))
155 EXCLUDED_HAPPY_Y_SRCS = $(filter %.y, $(EXCLUDED_SRCS))
156 EXCLUDED_HAPPY_LY_SRCS = $(filter %.ly, $(EXCLUDED_SRCS))
157 EXCLUDED_HAPPY_SRCS = $(EXCLUDED_HAPPY_Y_SRCS) $(EXCLUDED_HAPPY_LY_SRCS)
158 EXCLUDED_HS_SRCS = $(filter %.hs, $(EXCLUDED_SRCS))
159 EXCLUDED_LHS_SRCS = $(filter %.lhs, $(EXCLUDED_SRCS))
160 EXCLUDED_DERIVED_SRCS = $(patsubst %.hsc, %.hs, $(EXCLUDED_HSC_SRCS)) \
161 $(patsubst %.hsc, %_hsc.h, $(EXCLUDED_HSC_SRCS)) \
162 $(patsubst %.hsc, %_hsc.c, $(EXCLUDED_HSC_SRCS)) \
163 $(patsubst %.hsc, %.hc, $(EXCLUDED_HSC_SRCS)) \
164 $(patsubst %.y, %.hs, $(EXCLUDED_HAPPY_Y_SRCS)) \
165 $(patsubst %.ly, %.hs, $(EXCLUDED_HAPPY_LY_SRCS)) \
166 $(patsubst %.hs, %.hc, $(EXCLUDED_HS_SRCS)) \
167 $(patsubst %.lhs, %.hc, $(EXCLUDED_LHS_SRCS)) \
168 $(patsubst %.hs, %_stub.c, $(EXCLUDED_HS_SRCS)) \
169 $(patsubst %.lhs, %_stub.c, $(EXCLUDED_LHS_SRCS))
171 # Exclude _hsc.c files; they get built as part of the cbits library,
172 # not part of the main library
174 CLOSED_EXCLUDED_SRCS = $(sort $(EXCLUDED_SRCS) $(EXCLUDED_DERIVED_SRCS))
176 SRCS = $(filter-out $(CLOSED_EXCLUDED_SRCS), \
177 $(sort $(PRE_SRCS) $(DERIVED_SRCS)))
179 HS_SRCS = $(filter %.lhs %.hs, $(sort $(SRCS) $(BOOT_SRCS)))
180 HS_OBJS = $(addsuffix .$(way_)o,$(basename $(HS_SRCS)))
181 HS_IFACES = $(addsuffix .$(way_)hi,$(basename $(HS_SRCS)))
183 HSC_C_OBJS = $(addsuffix _hsc.$(way_)o,$(basename $(filter %.hsc,$(SRCS))))
185 # Always remove $(EXCLUDED_C_SRCS) from C_SRCS
186 EXCLUDED_C_SRCS = $(patsubst %.lhs, %_stub.c, $(HS_SRCS)) \
187 $(patsubst %.hs, %_stub.c, $(HS_SRCS))
190 C_SRCS = $(filter-out $(EXCLUDED_C_SRCS),$(filter %.c,$(SRCS)))
191 C_OBJS = $(addsuffix .$(way_)o,$(basename $(C_SRCS)))
193 # SCRIPT_SRCS: list of raw script files (in literate form)
194 # SCRIPT_OBJS: de-litted scripts
195 SCRIPT_SRCS = $(filter %.lprl,$(SRCS))
196 SCRIPT_OBJS = $(addsuffix .prl,$(basename $(SCRIPT_SRCS)))
198 OBJS = $(HS_OBJS) $(C_OBJS) $(SCRIPT_OBJS)
200 # The default is for $(LIBOBJS) to be the same as $(OBJS)
204 # Note that as long as you use the standard variables for setting
205 # which C & Haskell programs you want to work on, you don't have
206 # to set any of the clean variables - the default should do the Right
210 #------------------------------------------------------------------
212 # make depend defaults
214 # The default set of files for the dependency generators to work on
215 # is just their source equivalents.
218 ifneq "$(BootingFromHc)" "YES"
219 MKDEPENDHS_SRCS=$(HS_SRCS)
224 MKDEPENDC_SRCS=$(C_SRCS)
226 #------------------------------------------------------------------
230 # The default set of files for the TAGS file generators to work on
231 # is just their source equivalents.
233 TAGS_HS_SRCS=$(HS_SRCS)
234 TAGS_C_SRCS=$(C_SRCS)
236 #------------------------------------------------------------------
237 # Clean file make-variables.
239 # The following three variables are used to control
240 # what gets removed when doing `make clean'
242 # MOSTLYCLEAN_FILES object code etc., but not stuff
243 # that is slow to recompile and/or stable
245 # CLEAN_FILES all files that are created by running make.
247 # MAINTAINER_CLEAN_FILES also clean out machine-generated files
248 # that may require extra tools to create.
251 MOSTLY_CLEAN_FILES += $(HS_OBJS) $(C_OBJS) $(HSC_C_OBJS)
252 CLEAN_FILES += $(HS_PROG) $(C_PROG) $(SCRIPT_PROG) $(SCRIPT_LINK) \
253 $(PROG) $(LIBRARY) a.out \
254 $(DERIVED_HSC_SRCS) \
255 $(patsubst %,%/*.$(way_)hi, . $(ALL_DIRS))
257 # we delete *all* the .hi files we can find, rather than just
258 # $(HS_IFACES), because stale interfaces left around by modules which
259 # don't exist any more can screw up the build.
261 # Don't clean the .hc files if we're bootstrapping
262 ifneq "$(BootingFromHc)" "YES"
263 CLEAN_FILES += $(DERIVED_HC_SRCS)
266 DIST_CLEAN_FILES += .depend *.hp *.prof
268 MAINTAINER_CLEAN_FILES += $(BOOT_SRCS) $(DERIVED_HAPPY_SRCS)
271 # `Standard' set of files to clean out.
273 MOSTLY_CLEAN_FILES += \
274 *.CKP *.ln *.BAK *.bak .*.bak *.o core a.out errs ,* *.a .emacs_* \
275 tags TAGS *.ind *.ilg *.idx *.idx-prev *.aux *.aux-prev *.dvi *.log \
276 *.toc *.lot *.lof *.blg *.cb *_stub.c *_stub.h *.raw_s *.a.list
278 #------------------------------------------------------------------
282 # Following variables are used for creating source and binary distributions:
284 # SRC_DIST_NAME && BIN_DIST_NAME -- the package names
286 # SRC_DIST_FILES = list of extra files to include from a build tree into a source
289 # SRC_DIST_DIR = what the current directory in the source/build tree
290 # maps to in the source distrib. tree being created.
292 SRC_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion)
295 # Binary distributions proceeds as follows:
297 # Fromthe top of a build tree, you do `make binary-dist'. The
298 # canned rule for this (in target.mk) will then do a binary
299 # install to a temporary directory before packaging it all up.
300 # The following variables guide the binary-dist:
302 # BIN_DIST_TMPDIR= the absolute path to where the temporary directory
303 # structure of a binary distribution should be created.
304 # [Default: toplevel from which you issue `make binary-dist']
305 # BIN_DIST_NAME= what to call the thing.
307 # BIN_DIST_DIRS= at the toplevel, list of directories to descend into when
308 # building the distribution tree.
310 # An extra directory variable that is set during bin-dists is $(bindist_top), giving
311 # the abs. path to the root of the binary installation tree. (useful when punting
312 # stuff like README and ANNOUNCE into a distrib, for instance)
314 # The layout of a binary distribution is described in the
315 # installation documentation.
319 # Directory in which DLLs are dumped so as not to get picked up by running
320 # programs (e.g. ghc or hsc) that run in the build tree
322 DLL_PEN = $(FPTOOLS_TOP)/dll