1 #################################################################################
5 # Standard targets for fptools
7 #################################################################################
10 # This file contain three groups of target rules:
16 # 2. GNU standard targets
18 # install* uninstall installcheck installdirs
19 # clean* distclean* mostlyclean* maintainer-clean*
25 # 3. Some of the above targets have a version that
26 # recursively invokes that target in sub-directories.
27 # This relies on the importing Makefile setting SUBDIRS
29 # The recursive targets are marked with a * above
37 ##################################################################
38 # FPtools standard targets
42 # The depend target has to cope with a set of files that may have
43 # different ways of computing their dependencies, i.e., a Haskell
44 # module's dependencies are computed differently from C files.
46 # Note that we don't compute dependencies automatically, i.e., have the
47 # .depend file be a target that is dependent on the Haskell+C sources,
48 # and then have the `depend' target depend on `.depend'. The reason for
49 # this is that when GNU make is processing the `include .depend' statement
50 # it records .depend as being a Makefile. Before doing any other processing,
51 # `make' will try to check to see if the Makefiles are up-to-date. And,
52 # surprisingly enough, .depend has a rule for it, so if any of the source
53 # files change, it will be invoked, *regardless* of what target you're making.
55 # So, for now, the dependencies has to be re-computed manually via `make depend'
56 # whenever a module changes its set of imports. Doing what was outlined above
57 # is only a small optimisation anyway, it would avoid the recomputation of
58 # dependencies if the .depend file was newer than any of the source modules.
62 # Compiler produced files that are targets of the source's imports.
63 MKDEPENDHS_OBJ_SUFFICES=o
65 depend :: $(MKDEPENDHS_SRCS) $(MKDEPENDC_SRCS)
68 ifneq "$(DOC_SRCS)" ""
69 $(MKDEPENDLIT) -o .depend $(MKDEPENDLIT_OPTS) $(filter %.lit,$(DOC_SRCS))
71 ifneq "$(MKDEPENDC_SRCS)" ""
72 $(MKDEPENDC) -f .depend $(MKDEPENDC_OPTS) -- $(CC_OPTS) -- $(MKDEPENDC_SRCS)
74 ifneq "$(MKDEPENDHS_SRCS)" ""
75 @if ( echo $(notdir $(MKDEPENDHS)) | grep ghc >/dev/null 2>&1 ); then \
76 echo $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-optdep-o -optdep$(obj)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS) ; \
77 $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-optdep-o -optdep$(obj)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS) ; \
79 echo $(MKDEPENDHS) -f .depend $(MKDEPENDHS_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(HC_OPTS) -- $(MKDEPENDHS_SRCS) ; \
80 $(MKDEPENDHS) -f .depend $(MKDEPENDHS_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(HC_OPTS) -- $(MKDEPENDHS_SRCS) ; \
84 # The above decides whether to invoke the computation of dependencies
85 # the ghc-0.xx or the ghc-2.x way by looking for "ghc" in the name of
86 # of the `make depend' script. Not bulletproof this.
89 ##################################################################
92 # The boot target, at a minimum generates dependency information
98 ##################################################################
99 # GNU Standard targets
101 # Every Makefile should define the following targets
104 # Compile the entire program. This should be the default target.
105 # This target need not rebuild any documentation files; Info files
106 # should normally be included in the distribution, and DVI files
107 # should be made only when explicitly asked for.
110 # Compile the program and copy the executables, libraries, and so on
111 # to the file names where they should reside for actual use. If
112 # there is a simple test to verify that a program is properly
113 # installed, this target should run that test.
115 # The commands should create all the directories in which files are
116 # to be installed, if they don't already exist. This includes the
117 # directories specified as the values of the variables prefix and
118 # exec_prefix , as well as all subdirectories that are needed. One
119 # way to do this is by means of an installdirs target as described
122 # Use `-' before any command for installing a man page, so that make
123 # will ignore any errors. This is in case there are systems that
124 # don't have the Unix man page documentation system installed.
126 # The way to install Info files is to copy them into `$(infodir)'
127 # with $(INSTALL_DATA) (see Command Variables), and then run the
128 # install-info program if it is present. install-info is a script
129 # that edits the Info `dir' file to add or update the menu entry for
130 # the given Info file; it will be part of the Texinfo package. Here
131 # is a sample rule to install an Info file:
133 # $(infodir)/foo.info: foo.info # There may be a newer info
134 # file in . than in srcdir.
135 # -if test -f foo.info; then d=.; \
136 # else d=$(srcdir); fi; \ $(INSTALL_DATA)
137 # $$d/foo.info $@; \ # Run install-info only if it
138 # exists. # Use `if' instead of just prepending `-' to the
139 # # line so we notice real errors from install-info. # We
140 # use `$(SHELL) -c' because some shells do not # fail
141 # gracefully when there is an unknown command.
142 # if $(SHELL) -c 'install-info --version' \
143 # >/dev/null 2>&1; then \ install-info
144 # --infodir=$(infodir) $$d/foo.info; \ else true;
148 # Delete all the installed files that the `install' target would
149 # create (but not the noninstalled files such as `make all' would
154 # Delete all files from the current directory that are normally
155 # created by building the program. Don't delete the files that
156 # record the configuration. Also preserve files that could be made
157 # by building, but normally aren't because the distribution comes
160 # Delete `.dvi' files here if they are not part of the
164 # Delete all files from the current directory that are created by
165 # configuring or building the program. If you have unpacked the
166 # source and built the program without creating any other files,
167 # `make distclean' should leave only the files that were in the
171 # Like `clean', but may refrain from deleting a few files that
172 # people normally don't want to recompile. For example, the
173 # `mostlyclean' target for GCC does not delete `libgcc.a', because
174 # recompiling it is rarely necessary and takes a lot of time.
177 # Delete everything from the current directory that can be
178 # reconstructed with this Makefile. This typically includes
179 # everything deleted by distclean , plus more: C source files
180 # produced by Bison, tags tables, Info files, and so on.
182 # One exception, however: `make maintainer-clean' should not delete
183 # `configure' even if `configure' can be remade using a rule in the
184 # Makefile. More generally, `make maintainer-clean' should not delete
185 # anything that needs to exist in order to run `configure' and then
186 # begin to build the program.
189 # Update a tags table for this program.
192 # Generate any Info files needed. The best way to write the rules is
197 # foo.info: foo.texi chap1.texi chap2.texi
198 # $(MAKEINFO) $(srcdir)/foo.texi
200 # You must define the variable MAKEINFO in the Makefile. It should
201 # run the makeinfo program, which is part of the Texinfo
205 # Generate DVI files for all TeXinfo documentation. For example:
209 # foo.dvi: foo.texi chap1.texi chap2.texi
210 # $(TEXI2DVI) $(srcdir)/foo.texi
212 # You must define the variable TEXI2DVI in the Makefile. It should
213 # run the program texi2dvi , which is part of the Texinfo
214 # distribution. Alternatively, write just the dependencies, and
215 # allow GNU Make to provide the command.
217 # ps is a FPtools addition for Postscript files
219 # `dist' `binary-dist'
220 # Create a distribution tar file for this program. The tar file
221 # should be set up so that the file names in the tar file start with
222 # a subdirectory name which is the name of the package it is a
223 # distribution for. This name can include the version number.
225 # For example, the distribution tar file of GCC version 1.40 unpacks
226 # into a subdirectory named `gcc-1.40'.
228 # The easiest way to do this is to create a subdirectory
229 # appropriately named, use ln or cp to install the proper files in
230 # it, and then tar that subdirectory.
232 # The dist target should explicitly depend on all non-source files
233 # that are in the distribution, to make sure they are up to date in
234 # the distribution. See Making Releases.
236 # binary-dist is an FPtools addition for binary distributions
239 # Perform self-tests (if any). The user must build the program
240 # before running the tests, but need not install the program; you
241 # should write the self-tests so that they work when the program is
242 # built but not installed.
244 # The following targets are suggested as conventional names, for programs
245 # in which they are useful.
248 # Perform installation tests (if any). The user must build and
249 # install the program before running the tests. You should not
250 # assume that `$(bindir)' is in the search path.
253 # It's useful to add a target named `installdirs' to create the
254 # directories where files are installed, and their parent
255 # directories. There is a script called `mkinstalldirs' which is
256 # convenient for this; find it in the Texinfo package.
257 # (FPTOOLS: we use a close relative of the suggested script, situated
258 # in glafp-utils/mkdirhier -- SOF)
263 ###########################################
267 ###########################################
269 # For each of these variables that is defined
270 # we generate one "all" rule and one rule for the variable itself:
272 # HS_PROG Haskell program
275 # SCRIPT_PROG Script (e.g. Perl script)
277 # For details of exactly what rule is generated, see the
278 # relevant section below
282 #----------------------------------------
285 ifneq "$(HS_PROG)" ""
288 $(HS_PROG) :: $(HS_OBJS)
289 $(HC) -o $@ $(HC_OPTS) $(LD_OPTS) $(HS_OBJS) $(LIBS)
292 #----------------------------------------
298 $(C_PROG) :: $(C_OBJS)
299 $(CC) -o $@ $(CC_OPTS) $(LD_OPTS) $(C_OBJS) $(LIBS)
303 #----------------------------------------
306 ifneq "$(LIBRARY)" ""
312 $(AR) $(AR_OPTS) $@ $(LIBOBJS)
317 # For Haskell object files, we might have chosen to split
318 # up the object files. Test for whether the library being
319 # built is consisting of Haskell files by (hackily) checking
320 # whether HS_SRCS is empty or not.
323 ifneq "$(HS_SRCS)" ""
324 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
327 TMPDIR=$(TMPDIR); export TMPDIR; find $(patsubst %.$(way_)o,%,$(LIBOBJS)) -name '*.$(way_)o' -print | xargs ar q $@
333 $(LIBRARY) :: $(LIBOBJS)
337 #----------------------------------------
340 ifneq "$(SCRIPT_PROG)" ""
342 # To produce a fully functional script, you may
343 # have to add some configuration variables at the top of
344 # the script, i.e., the compiler driver needs to know
345 # the path to various utils in the build tree for instance.
347 # To have the build rule for the script automatically do this
348 # for you, set the variable SCRIPT_SUBST_VARS to the list of
349 # variables you need to put in.
352 # SCRIPT_SUBST creates a string of echo commands that
353 # will when evaluated append the (perl)variable name and its value
354 # to the target it is used for, i.e.,
358 # SCRIPT_SUBST_VARS = A B
359 # SCRIPT_SUBST=echo "$""A=\"foo\";" >> $@; echo "$""B=\"bar\";" >> $@
361 # so if you have a rule like the following
366 # @eval $(SCRIPT_SUBST)
368 # `make foo' would create a file `foo' containing the following
375 # ToDo: make this work for shell scripts (drop the initial $).
377 ifeq "$(INTERP)" "$(SHELL)"
378 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$(val)=\\\"$($(val))\\\";\" >> $@;")
380 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$$\"\"$(val)=\\\"$($(val))\\\";\" >> $@;")
383 all :: $(SCRIPT_PROG)
386 # #! support under cygwin32 is not quite there yet,
387 # so we rely on the eval `trick' instead. On all other
388 # platforms, we prepend #!$(INTERP) -- SOF 6/97
391 $(SCRIPT_PROG) :: $(SCRIPT_OBJS)
394 ifeq "$(INTERP)" "perl"
395 ifneq "$(BIN_DIST)" "1"
396 echo "#! "$(PERL) > $@
402 @echo "#!"$(INTERP) > $@
407 ifneq "$(SCRIPT_PREFIX_FILES)" ""
408 @cat $(SCRIPT_PREFIX_FILES) >> $@
410 @eval $(SCRIPT_SUBST)
411 @cat $(SCRIPT_OBJS) >> $@
417 ###########################################
419 # Targets: install install-strip uninstall
421 ###########################################
423 # For each of these variables that is defined, you
424 # get one install rule
426 # INSTALL_PROGS executable programs in $(bindir)
427 # INSTALL_BIN_LINKS symbolic links to executable programs in $(bindir)
428 # INSTALL_SCRIPTS executable scripts in $(bindir)
429 # INSTALL_LIBS platform-dependent libraries in $(libdir) (ranlib'ed)
430 # INSTALL_LIBEXECS platform-dependent execs in $(libdir)
431 # INSTALL_DATAS platform-independent files in $(datadir)
433 # If the installation directory variable is undefined, the install rule simply
434 # emits a suitable error message.
436 # Remember, too, that the installation directory variables ($(bindir) and
437 # friends can be overridden from their original settings in mk/config.mk.in
440 .PHONY: install installdirs install-strip install-dirs uninstall install-docs show-install
443 @echo "bindir = $(bindir)"
444 @echo "libdir = $(libdir)"
445 @echo "libexecdir = $(libexecdir) # by default, same as libdir"
446 @echo "datadir = $(datadir) # unused for ghc project"
449 # Sometimes useful to separate out the creation of install directories
450 # from the installation itself.
453 @$(INSTALL_DIR) $(bindir)
454 @$(INSTALL_DIR) $(libdir)
455 @$(INSTALL_DIR) $(libexecdir)
456 @$(INSTALL_DIR) $(datadir)
458 # Better do this first...
459 # but we won't for the moment, do it on-demand from
460 # within the various install targets instead.
461 #install:: install-dirs
463 ifneq "$(INSTALL_PROGS)" ""
464 install:: $(INSTALL_PROGS)
465 @$(INSTALL_DIR) $(bindir)
466 for i in $(INSTALL_PROGS); do \
467 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i$(exeext) $(bindir); \
471 ifneq "$(INSTALL_BIN_LINKS)" ""
472 install:: $(INSTALL_BIN_LINKS)
473 @$(INSTALL_DIR) $(bindir)
474 for i in $(INSTALL_BIN_LINKS); do \
475 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i$(exeext) $(bindir); \
480 # Just like INSTALL_PROGS, but prefix with install sites bin/lib/data and
481 # install without stripping.
483 ifneq "$(INSTALL_SCRIPTS)" ""
484 install:: $(INSTALL_SCRIPTS)
485 @$(INSTALL_DIR) $(bindir)
486 ifeq "$(INTERP)" "perl"
487 ifneq "$(BIN_DIST)" "1"
488 @for i in $(INSTALL_SCRIPTS); do \
490 echo "#! $(PERL)" > $$i.tmp ; \
491 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
492 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
493 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
494 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
495 cat $$i >> $$i.tmp ; \
496 echo $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_OPTS)) $$i.tmp $(bindir)/$$i ; \
497 $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_BIN_OPTS)) $$i.tmp $(bindir)/$$i ; \
501 for i in $(INSTALL_SCRIPTS); do \
502 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
506 for i in $(INSTALL_SCRIPTS); do \
507 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
512 ifneq "$(INSTALL_LIB_SCRIPTS)" ""
513 install:: $(INSTALL_LIB_SCRIPTS)
514 @$(INSTALL_DIR) $(libdir)
515 ifeq "$(INTERP)" "perl"
516 ifneq "$(BIN_DIST)" "1"
517 @for i in $(INSTALL_LIB_SCRIPTS); do \
519 echo "#! $(PERL)" > $$i.tmp ; \
520 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
521 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
522 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
523 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
524 cat $$i >> $$i.tmp ; \
525 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir) ; \
526 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libdir)/$$i ; \
530 for i in $(INSTALL_LIB_SCRIPTS); do \
531 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
535 for i in $(INSTALL_LIB_SCRIPTS); do \
536 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
541 ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
542 install:: $(INSTALL_LIBEXEC_SCRIPTS)
543 @$(INSTALL_DIR) $(libexecdir)
544 ifeq "$(INTERP)" "perl"
545 ifneq "$(BIN_DIST)" "1"
546 @for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
548 echo "#! $(PERL)" > $$i.tmp ; \
549 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
550 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
551 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
552 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
553 cat $$i >> $$i.tmp ; \
554 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir) ; \
555 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libexecdir)/$$i ; \
559 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
560 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
564 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
565 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
570 ifneq "$(INSTALL_LIBS)" ""
571 install:: $(INSTALL_LIBS)
572 @$(INSTALL_DIR) $(libdir)
573 for i in $(INSTALL_LIBS); do \
576 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
577 $(RANLIB) $(libdir)/`basename $$i` ;; \
579 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
584 ifneq "$(INSTALL_LIBEXECS)" ""
585 install:: $(INSTALL_LIBEXECS)
586 @$(INSTALL_DIR) $(libexecdir)
587 -for i in $(INSTALL_LIBEXECS); do \
588 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i$(exeext) $(libexecdir); \
592 ifneq "$(INSTALL_DATAS)" ""
593 install:: $(INSTALL_DATAS)
594 @$(INSTALL_DIR) $(datadir)
595 for i in $(INSTALL_DATAS); do \
596 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(datadir); \
604 ifeq ($(INSTALL_PROGS),)
605 @for i in $(INSTALL_PROGS) ; do \
606 echo rm -f $(bindir)/`basename $$i`; \
607 rm -f $(bindir)/`basename $$i`; \
610 ifeq ($(INSTALL_LIBS),)
611 @for i in $(INSTALL_LIBS); do \
612 echo rm -f $(libdir)/`basename $$i`; \
613 rm -f $(libdir)/`basename $$i`; \
616 ifeq ($(INSTALL_LIBEXECS),)
617 @for i in $(INSTALL_LIBEXECS); do \
618 echo rm -f $(libexecdir)/`basename $$i`; \
619 rm -f $(libexecdir)/`basename $$i`; \
622 ifeq ($(INSTALL_DATAS),)
623 @for i in $(INSTALL_DATAS); do \
624 echo rm -f $(datadir)/`basename $$i`; \
625 rm -f $(datadir)/`basename $$i`; \
630 # install-strip is from the GNU Makefile standard.
634 @$(MAKE) EXTRA_INSTALL_OPTS='-s' install
637 ###########################################
639 # Targets: dist binary-dist
641 ###########################################
645 # dist-pre is a canned rule the toplevel of your source tree
646 # would use as follows,
650 # it performs two tasks, first creating the distribution directory
651 # tree and it then decorates the new tree with symbolic links pointing
652 # to the symbolic links in the build tree.
654 # The dist-pre relies on (at least) the `find' in GNU findutils
655 # (only tested with version 4.1). All non-GNU `find's I have
656 # laid on my hands locally, has a restrictive treatment of {} in
657 # -exec commands, i.e.,
659 # find . -print echo a{} \;
661 # does not expand the {}, it has to be a separate argument (i.e. `a {}').
662 # GNU find is (IMHO) more sensible here, expanding any {} it comes across
663 # inside an -exec, whether it is a separate arg or part of a word:
667 # GNU find version 4.1
668 # $ find yes -exec echo oh,{}! \;
671 # Of course, the above is not impossible to achieve with other finds,
672 # just that GNU find does the Patently Right Thing here :)
674 # ====> if you're using these dist rules, get hold of GNU findutils.
678 .PHONY: dist dist-pre dist-post
681 # The dist rules leaves out CVS, SRC (from mkshadowdir) and tests
682 # directories when creating shadow source distrib tree
685 -rm -rf $(SRC_DIST_DIR)
686 -rm -f $(SRC_DIST_NAME).tar.gz
687 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -exec $(MKDIRHIER) $(SRC_DIST_DIR)/{} \; \) ; )
688 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -type l -exec $(LN_S) $(FPTOOLS_TOP_ABS)/{} $(SRC_DIST_DIR)/{} \; )
691 # After having created a shadow distribution tree and copied/linked
692 # all the necessary files to it, `dist-post' makes sure the permissions
693 # are set right and then package up the tree. Empty directories are also removed.
695 # For now, we make the packaging a separate rule, so as to allow
696 # the inspection of the dist tree before eventually packaging it up.
699 @echo Deleting the following empty directories..
700 ( cd $(SRC_DIST_DIR) ; cd .. ; find $(SRC_DIST_NAME) -type d -exec sh -c 'test x`ls $$0 | wc -l | sed -e "s/ //g"` = x0' {} \; -print -exec rm -rf {} \; -prune )
701 ( cd $(SRC_DIST_DIR) ; cd .. ; chmod -R a+rw $(SRC_DIST_NAME) )
704 cd $(SRC_DIST_DIR); cd ..; $(TAR) chzf $(SRC_DIST_NAME).tar.gz $(SRC_DIST_NAME)
709 # The default dist rule:
711 # copy/link the contents of $(SRC_DIST_FILES) into the
712 # shadow distribution tree. SRC_DIST_FILES contain the
713 # build-generated files that you want to include in
714 # a source distribution.
717 ifneq "$(SRC_DIST_FILES)" ""
719 @for i in $(SRC_DIST_FILES); do \
720 if (test -f "$$i"); then \
721 echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
722 $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
728 # binary-dist creates a binary bundle, set BIN_DIST_NAME
729 # to package name and do `make binary-dist' (normally this
730 # just a thing you would do from the toplevel of fptools or)
731 # from the top of a project.
733 .PHONY: binary-dist-pre binary-dist binary-pack
736 -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
737 -rm -f $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
738 @for i in $(BIN_DIST_DIRS); do \
739 if test -d "$$i"; then \
740 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
741 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
742 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
743 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
744 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion); \
745 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion); \
746 echo $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
747 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
748 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
749 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
750 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
751 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
752 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion) ; \
753 $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
754 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
755 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
756 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
757 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
758 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
759 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion) ; \
764 # Do this separately for now
767 ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME); rm -rf $(BIN_DIST_NAME) )
771 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
772 gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
777 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec rm -f {} \; )
780 ###########################################
782 # Targets: check tags show info
784 ###########################################
786 #------------------------------------------------------------
792 @for i in $(filter-out %.lhs .hs, $(TESTS)) ''; do \
793 if (test -f "$$i"); then \
794 echo Running: `basename $$i` ; \
795 cd test; `basename $$i` ; \
799 #------------------------------------------------------------
807 ifneq "$(HS_SRCS)" ""
808 $(HSTAGS) $(HSTAGS_OPTS) -- $(TAGS_HS_SRCS)
811 etags -a $(TAGS_C_SRCS)
813 @( DEREFFED=`ls -l Makefile | sed -e 's/.*-> \(.*\)/\1/g'` && $(RM) `dirname $$DEREFFED`/TAGS && $(CP) TAGS `dirname $$DEREFFED` ) || echo TAGS file generated, perhaps copy over to source tree?
815 #------------------------------------------------------------
817 # to see the effective value used for a Makefile variable, do
818 # make show VALUE=MY_VALUE
822 @echo '$(VALUE)=$($(VALUE))'
824 #------------------------------------------------------------
827 .PHONY: dvi ps html info txt
837 # Building literate root documents requires extra treatment,
838 # as the root files need to be processed different from other
839 # literate files (`compile' them into .itex with the -S (standalone)
840 # option) and then link together a master TeX document with
843 $(filter %.tex,$(patsubst %.lit,%.tex,$(DOC_SRCS))) :
845 $(LIT2LATEX) -S -c $(LIT2LATEX_OPTS) -o $(patsubst %.tex,%.itex,$@) $(addsuffix .lit,$(basename $@))
846 $(LIT2LATEX) -S $(LIT2LATEX_OPTS) -o $@ $(addsuffix .itex,$(basename $@))
849 # Ditto for texi and html
851 $(filter %.texi,$(patsubst %.lit,%.texi,$(DOC_SRCS))) :
853 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.texi,%.itxi,$@) $(addsuffix .lit,$(basename $@))
854 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $@ $(addsuffix .itxi,$(basename $@))
857 # Rather than using lit2html, we opt for the lit-texi-html route,
858 # and use texi2html as our HTML backend.
859 # (Note: we need to change mkdependlit to get this really off the ground)
861 # If the generated html representation is split up into a myriad of files,
862 # put the files in a subdirectory html/, if a monolith is created, park
863 # the generated file in the same dir as the .lit file.
865 $(filter %.html,$(patsubst %.lit,%.html,$(DOC_SRCS))) : $(filter %.lit,$(DOC_SRCS))
866 $(RM) $@ $(patsubst %.html,%.texi,$@) $(patsubst %.html,%.itxi,$@)
867 ifneq "$(filter -monolithic,$(TEXI2HTML_OPTS))" ""
868 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
869 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
870 $(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@)
871 cp $(TEXI2HTML_PREFIX)invisible.xbm .
873 $(RM) html/$(basename $@)*
875 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
876 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o html/$(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
877 (cd html; ../$(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@); cd ..)
878 cp $(TEXI2HTML_PREFIX)invisible.xbm html/
882 #--------------------------------------------------------------------------
885 # This will eventually replace the literate stuff for documentation
887 SGML_SRCS = $(wildcard *.sgml *.vsgml)
888 SGML_DVI = $(addsuffix .dvi, $(basename $(SGML_SRCS)))
889 SGML_PS = $(addsuffix .ps, $(basename $(SGML_SRCS)))
890 SGML_TEXI = $(addsuffix .texi, $(basename $(SGML_SRCS)))
891 SGML_INFO = $(addsuffix .info, $(basename $(SGML_SRCS)))
892 SGML_HTML = $(addsuffix .html, $(basename $(SGML_SRCS)))
893 SGML_TEXT = $(addsuffix .txt, $(basename $(SGML_SRCS)))
901 CLEAN_FILES += $(SGML_TEXT) $(SGML_HTML) $(SGML_TEXI) $(SGML_PS) $(SGML_DVI)
903 # suffix rules should handle the rest (for single-file docs at least).
905 ###########################################
909 ###########################################
911 .PHONY: realclean mostlyclean clean distclean maintainer-clean
913 # realclean is just a synonym for maintainer-clean
914 realclean: maintainer-clean
917 ifneq "$(MOSTLY_CLEAN_FILES)" ""
919 rm -f $(MOSTLY_CLEAN_FILES)
922 ifneq "$(CLEAN_FILES)" ""
928 ifneq "$(DIST_CLEAN_FILES)" ""
929 distclean:: mostlyclean clean
930 rm -f $(DIST_CLEAN_FILES)
934 ifneq "$(MAINTAINER_CLEAN_FILES)" ""
935 maintainer-clean:: mostlyclean clean distclean
936 @echo 'This command is intended for maintainers to use; it'
937 @echo 'deletes files that may need special tools to rebuild.'
938 rm -f $(MAINTAINER_CLEAN_FILES)
942 # If (Haskell) object files are split, cleaning up
943 # consist of descending into the directories where
944 # the myriads of object files have been put.
947 ifneq "$(HS_OBJS)" ""
948 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
950 find $(patsubst %.$(way_)o,%,$(HS_OBJS)) -name '*.$(way_)o' -print | xargs $(RM) __rm_food
951 -rmdir $(patsubst %.$(way_)o,%,$(HS_OBJS))
956 #################################################################################
960 #################################################################################
962 # Here is the ingenious jiggery pokery that allows you to build multiple versions
963 # of a program in a single build tree.
965 # The ways setup requires the following variables to be set:
967 # Expects: $(WAYS) the possible "way" strings to one of
968 # which $(way) will be set
971 # So how does $(way) ever get set to anything? Answer, we recursively
972 # invoke make, setting $(way) on the command line.
973 # When do we do this recursion? Answer: whenever the programmer
974 # asks make to make a target that involves a way suffix.
975 # We must remember *not* to recurse again; but that's easy: we
976 # just see if $(way) is set:
980 # If $(WAYS) = p mc, then WAY_TARGETS expands to
981 # %.p_lhs %.p_hs %.p_o ... %.mc_lhs %.p_hs ...
982 # and OTHER_WAY_TARGETS to
983 # %_p.a %_p %_mc.a %_mc
984 # where the suffixes are from $(SUFFIXES)
986 # We have to treat libraries and "other" targets differently,
987 # because their names are of the form
988 # libHS_p.a and Foo_p
989 # whereas everything else has names of the form
992 FPTOOLS_SUFFIXES := o hi hc
994 WAY_TARGETS = $(foreach way,$(WAYS),$(foreach suffix, $(FPTOOLS_SUFFIXES), %.$(way)_$(suffix)))
995 LIB_WAY_TARGETS = $(foreach way,$(WAYS),%_$(way).a %_$(way))
997 # $@ will be something like Foo.p_o
998 # $(suffix $@) returns .p_o
999 # $(subst .,.p_o) returns p_o
1000 # $(subst _,.,p_o) returns p.o (clever)
1001 # $(basename p.o) returns p
1004 $(MAKE) way=$(basename $(subst _,.,$(subst .,,$(suffix $@)))) $@
1006 # $(@F) will be something like libHS_p.a, or Foo_p
1007 # $(basename $(@F)) will be libHS_p, or Foo_p
1008 # The sed script extracts the "p" part.
1010 $(LIB_WAY_TARGETS) :
1011 $(MAKE) $(MFLAGS) $@ way=$(subst .,,$(suffix $(subst _,.,$(basename $@))))
1016 ##################################################################
1020 ##################################################################
1022 # Here are the diabolically clever rules that
1024 # (a) for each "recursive target" <t>
1025 # propagates "make <t>" to directories in SUBDIRS
1027 # (b) when SUBDIRS is empty,
1028 # for each "multi-way-target" <t>
1029 # calls "make -way=w <t>" for each w in $(WAYS)
1031 # This has the effect of making the standard target
1032 # in each of the specified ways (as well as in the normal way
1034 # Controlling variables
1035 # WAYS = extra (beyond the normal way) ways to build things in
1036 # SUBDIRS = subdirectories to recurse into
1038 # No ways, so iterate over the SUBDIRS
1040 # note about recursively invoking make: we'd like make to drop all the
1041 # way back to the top level if it fails in any of the
1042 # sub(sub-...)directories. This is done by setting the -e flag to the
1043 # shell during the loop, which causes an immediate failure if any of
1044 # the shell commands fail.
1046 # One exception: if the user gave the -i or -k flag to make in the
1047 # first place, we'd like to reverse this behaviour. So we check for
1048 # these flags, and set the -e flag appropriately. NOTE: watch out for
1049 # the --no-print-directory flag which is passed to recursive
1050 # invocations of make.
1053 ifneq "$(SUBDIRS)" ""
1055 all docs runtests boot TAGS clean veryclean maintainer-clean install info ::
1056 @echo "------------------------------------------------------------------------"
1057 @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
1058 @echo "PWD = $(shell pwd)"
1059 @echo "------------------------------------------------------------------------"
1060 @case '${MFLAGS}' in *-[ik]*) set +e;; *-r*[ik]*) set +e;; *) set -e;; esac; \
1061 for i in $(SUBDIRS) ; do \
1062 echo "------------------------------------------------------------------------"; \
1063 echo "==fptools== $(MAKE) $@ $(MFLAGS);"; \
1064 echo " in $(shell pwd)/$$i"; \
1065 echo "------------------------------------------------------------------------"; \
1066 $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
1068 @echo "------------------------------------------------------------------------"
1069 @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
1070 @echo "PWD = $(shell pwd)"
1071 @echo "------------------------------------------------------------------------"
1074 @case '${MFLAGS}' in *-[ik]*) set +e;; *-r*[ik]*) set +e;; *) set -e;; esac; \
1075 for i in $(SUBDIRS) ; do \
1076 $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
1077 $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
1083 # Selectively building subdirectories.
1086 ifneq "$(SUBDIRS)" ""
1088 $(MAKE) -C $@ $(MFLAGS)
1094 # NB: the targets exclude
1096 # since these are way-independent
1097 all docs runtests TAGS clean veryclean maintainer-clean install ::
1098 @echo "------------------------------------------------------------------------"
1099 @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
1100 @echo "PWD = $(shell pwd)"
1101 @echo "------------------------------------------------------------------------"
1102 @case '${MFLAGS}' in *-[ik]*) set +e;; *-r*[ik]*) set +e;; *) set -e;; esac; \
1103 for i in $(WAYS) ; do \
1104 echo "------------------------------------------------------------------------"; \
1105 echo "==fptools== $(MAKE) way=$$i $@;"; \
1106 echo "PWD = $(shell pwd)"; \
1107 echo "------------------------------------------------------------------------"; \
1108 $(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
1110 @echo "------------------------------------------------------------------------"
1111 @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
1112 @echo "PWD = $(shell pwd)"
1113 @echo "------------------------------------------------------------------------"