1 #################################################################################
5 # Standard targets for fptools
7 #################################################################################
10 # This file contain three groups of target rules:
16 # 2. GNU standard targets
18 # install* uninstall installcheck installdirs
19 # clean* distclean* mostlyclean* maintainer-clean*
25 # 3. Some of the above targets have a version that
26 # recursively invokes that target in sub-directories.
27 # This relies on the importing Makefile setting SUBDIRS
29 # The recursive targets are marked with a * above
37 ##################################################################
38 # FPtools standard targets
42 # The depend target has to cope with a set of files that may have
43 # different ways of computing their dependencies, i.e., a Haskell
44 # module's dependencies are computed differently from C files.
46 # Note that we don't compute dependencies automatically, i.e., have the
47 # .depend file be a target that is dependent on the Haskell+C sources,
48 # and then have the `depend' target depend on `.depend'. The reason for
49 # this is that when GNU make is processing the `include .depend' statement
50 # it records .depend as being a Makefile. Before doing any other processing,
51 # `make' will try to check to see if the Makefiles are up-to-date. And,
52 # surprisingly enough, .depend has a rule for it, so if any of the source
53 # files change, it will be invoked, *regardless* of what target you're making.
55 # So, for now, the dependencies has to be re-computed manually via `make depend'
56 # whenever a module changes its set of imports. Doing what was outlined above
57 # is only a small optimisation anyway, it would avoid the recomputation of
58 # dependencies if the .depend file was newer than any of the source modules.
62 # Compiler produced files that are targets of the source's imports.
63 MKDEPENDHS_OBJ_SUFFICES=o
65 depend :: $(MKDEPENDHS_SRCS) $(MKDEPENDC_SRCS)
68 ifneq "$(DOC_SRCS)" ""
69 $(MKDEPENDLIT) -o .depend $(MKDEPENDLIT_OPTS) $(filter %.lit,$(DOC_SRCS))
71 ifneq "$(MKDEPENDC_SRCS)" ""
72 $(MKDEPENDC) -f .depend $(MKDEPENDC_OPTS) -- $(CC_OPTS) -- $(MKDEPENDC_SRCS)
74 ifneq "$(MKDEPENDHS_SRCS)" ""
75 @if ( echo $(notdir $(MKDEPENDHS)) | grep ghc >/dev/null 2>&1 ); then \
76 echo $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-optdep-o -optdep$(obj)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS) ; \
77 $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-optdep-o -optdep$(obj)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS) ; \
79 echo $(MKDEPENDHS) -f .depend $(MKDEPENDHS_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(HC_OPTS) -- $(MKDEPENDHS_SRCS) ; \
80 $(MKDEPENDHS) -f .depend $(MKDEPENDHS_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(HC_OPTS) -- $(MKDEPENDHS_SRCS) ; \
84 # The above decides whether to invoke the computation of dependencies
85 # the ghc-0.xx or the ghc-2.x way by looking for "ghc" in the name of
86 # of the `make depend' script. Not bulletproof this.
89 ##################################################################
92 # The boot target, at a minimum generates dependency information
98 ##################################################################
99 # GNU Standard targets
101 # Every Makefile should define the following targets
104 # Compile the entire program. This should be the default target.
105 # This target need not rebuild any documentation files; Info files
106 # should normally be included in the distribution, and DVI files
107 # should be made only when explicitly asked for.
110 # Compile the program and copy the executables, libraries, and so on
111 # to the file names where they should reside for actual use. If
112 # there is a simple test to verify that a program is properly
113 # installed, this target should run that test.
115 # The commands should create all the directories in which files are
116 # to be installed, if they don't already exist. This includes the
117 # directories specified as the values of the variables prefix and
118 # exec_prefix , as well as all subdirectories that are needed. One
119 # way to do this is by means of an installdirs target as described
122 # Use `-' before any command for installing a man page, so that make
123 # will ignore any errors. This is in case there are systems that
124 # don't have the Unix man page documentation system installed.
126 # The way to install Info files is to copy them into `$(infodir)'
127 # with $(INSTALL_DATA) (see Command Variables), and then run the
128 # install-info program if it is present. install-info is a script
129 # that edits the Info `dir' file to add or update the menu entry for
130 # the given Info file; it will be part of the Texinfo package. Here
131 # is a sample rule to install an Info file:
133 # $(infodir)/foo.info: foo.info # There may be a newer info
134 # file in . than in srcdir.
135 # -if test -f foo.info; then d=.; \
136 # else d=$(srcdir); fi; \ $(INSTALL_DATA)
137 # $$d/foo.info $@; \ # Run install-info only if it
138 # exists. # Use `if' instead of just prepending `-' to the
139 # # line so we notice real errors from install-info. # We
140 # use `$(SHELL) -c' because some shells do not # fail
141 # gracefully when there is an unknown command.
142 # if $(SHELL) -c 'install-info --version' \
143 # >/dev/null 2>&1; then \ install-info
144 # --infodir=$(infodir) $$d/foo.info; \ else true;
148 # Delete all the installed files that the `install' target would
149 # create (but not the noninstalled files such as `make all' would
154 # Delete all files from the current directory that are normally
155 # created by building the program. Don't delete the files that
156 # record the configuration. Also preserve files that could be made
157 # by building, but normally aren't because the distribution comes
160 # Delete `.dvi' files here if they are not part of the
164 # Delete all files from the current directory that are created by
165 # configuring or building the program. If you have unpacked the
166 # source and built the program without creating any other files,
167 # `make distclean' should leave only the files that were in the
171 # Like `clean', but may refrain from deleting a few files that
172 # people normally don't want to recompile. For example, the
173 # `mostlyclean' target for GCC does not delete `libgcc.a', because
174 # recompiling it is rarely necessary and takes a lot of time.
177 # Delete everything from the current directory that can be
178 # reconstructed with this Makefile. This typically includes
179 # everything deleted by distclean , plus more: C source files
180 # produced by Bison, tags tables, Info files, and so on.
182 # One exception, however: `make maintainer-clean' should not delete
183 # `configure' even if `configure' can be remade using a rule in the
184 # Makefile. More generally, `make maintainer-clean' should not delete
185 # anything that needs to exist in order to run `configure' and then
186 # begin to build the program.
189 # Update a tags table for this program.
192 # Generate any Info files needed. The best way to write the rules is
197 # foo.info: foo.texi chap1.texi chap2.texi
198 # $(MAKEINFO) $(srcdir)/foo.texi
200 # You must define the variable MAKEINFO in the Makefile. It should
201 # run the makeinfo program, which is part of the Texinfo
205 # Generate DVI files for all TeXinfo documentation. For example:
209 # foo.dvi: foo.texi chap1.texi chap2.texi
210 # $(TEXI2DVI) $(srcdir)/foo.texi
212 # You must define the variable TEXI2DVI in the Makefile. It should
213 # run the program texi2dvi , which is part of the Texinfo
214 # distribution. Alternatively, write just the dependencies, and
215 # allow GNU Make to provide the command.
217 # ps is a FPtools addition for Postscript files
219 # `dist' `binary-dist'
220 # Create a distribution tar file for this program. The tar file
221 # should be set up so that the file names in the tar file start with
222 # a subdirectory name which is the name of the package it is a
223 # distribution for. This name can include the version number.
225 # For example, the distribution tar file of GCC version 1.40 unpacks
226 # into a subdirectory named `gcc-1.40'.
228 # The easiest way to do this is to create a subdirectory
229 # appropriately named, use ln or cp to install the proper files in
230 # it, and then tar that subdirectory.
232 # The dist target should explicitly depend on all non-source files
233 # that are in the distribution, to make sure they are up to date in
234 # the distribution. See Making Releases.
236 # binary-dist is an FPtools addition for binary distributions
239 # Perform self-tests (if any). The user must build the program
240 # before running the tests, but need not install the program; you
241 # should write the self-tests so that they work when the program is
242 # built but not installed.
244 # The following targets are suggested as conventional names, for programs
245 # in which they are useful.
248 # Perform installation tests (if any). The user must build and
249 # install the program before running the tests. You should not
250 # assume that `$(bindir)' is in the search path.
253 # It's useful to add a target named `installdirs' to create the
254 # directories where files are installed, and their parent
255 # directories. There is a script called `mkinstalldirs' which is
256 # convenient for this; find it in the Texinfo package.
257 # (FPTOOLS: we use a close relative of the suggested script, situated
258 # in glafp-utils/mkdirhier -- SOF)
263 ###########################################
267 ###########################################
269 # For each of these variables that is defined
270 # we generate one "all" rule and one rule for the variable itself:
272 # HS_PROG Haskell program
275 # SCRIPT_PROG Script (e.g. Perl script)
277 # For details of exactly what rule is generated, see the
278 # relevant section below
282 #----------------------------------------
285 ifneq "$(HS_PROG)" ""
288 $(HS_PROG) :: $(HS_OBJS)
289 $(HC) -o $@ $(HC_OPTS) $(LD_OPTS) $(HS_OBJS) $(LIBS)
292 #----------------------------------------
298 $(C_PROG) :: $(C_OBJS)
299 $(CC) -o $@ $(CC_OPTS) $(LD_OPTS) $(C_OBJS) $(LIBS)
303 #----------------------------------------
306 ifneq "$(LIBRARY)" ""
312 $(AR) $(AR_OPTS) $@ $(LIBOBJS)
317 # For Haskell object files, we might have chosen to split
318 # up the object files. Test for whether the library being
319 # built is consisting of Haskell files by (hackily) checking
320 # whether HS_SRCS is empty or not.
323 ifneq "$(HS_SRCS)" ""
324 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
327 TMPDIR=$(TMPDIR); export TMPDIR; find $(patsubst %.$(way_)o,%,$(LIBOBJS)) -name '*.$(way_)o' -print | xargs ar q $@
333 $(LIBRARY) :: $(LIBOBJS)
337 #----------------------------------------
340 ifneq "$(SCRIPT_PROG)" ""
342 # To produce a fully functional script, you may
343 # have to add some configuration variables at the top of
344 # the script, i.e., the compiler driver needs to know
345 # the path to various utils in the build tree for instance.
347 # To have the build rule for the script automatically do this
348 # for you, set the variable SCRIPT_SUBST_VARS to the list of
349 # variables you need to put in.
352 # SCRIPT_SUBST creates a string of echo commands that
353 # will when evaluated append the (perl)variable name and its value
354 # to the target it is used for, i.e.,
358 # SCRIPT_SUBST_VARS = A B
359 # SCRIPT_SUBST=echo "$""A=\"foo\";" >> $@; echo "$""B=\"bar\";" >> $@
361 # so if you have a rule like the following
366 # @eval $(SCRIPT_SUBST)
368 # `make foo' would create a file `foo' containing the following
375 # ToDo: make this work for shell scripts (drop the initial $).
377 ifeq "$(INTERP)" "$(SHELL)"
378 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$(val)=\\\"$($(val))\\\";\" >> $@;")
380 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$$\"\"$(val)=\\\"$($(val))\\\";\" >> $@;")
383 all :: $(SCRIPT_PROG)
386 # #! support under cygwin32 is not quite there yet,
387 # so we rely on the eval `trick' instead. On all other
388 # platforms, we prepend #!$(INTERP) -- SOF 6/97
391 $(SCRIPT_PROG) :: $(SCRIPT_OBJS)
394 ifeq "$(INTERP)" "perl"
395 ifneq "$(BIN_DIST)" "1"
396 echo "#! "$(PERL) > $@
402 @echo "#!"$(INTERP) > $@
407 ifneq "$(SCRIPT_PREFIX_FILES)" ""
408 @cat $(SCRIPT_PREFIX_FILES) >> $@
410 @eval $(SCRIPT_SUBST)
411 @cat $(SCRIPT_OBJS) >> $@
417 ###########################################
419 # Targets: install install-strip uninstall
421 ###########################################
423 # For each of these variables that is defined, you
424 # get one install rule
426 # INSTALL_PROGS executable programs in $(bindir)
427 # INSTALL_SCRIPTS executable scripts in $(bindir)
428 # INSTALL_LIBS platform-dependent libraries in $(libdir) (ranlib'ed)
429 # INSTALL_LIBEXECS platform-dependent execs in $(libdir)
430 # INSTALL_DATAS platform-independent files in $(datadir)
432 # If the installation directory variable is undefined, the install rule simply
433 # emits a suitable error message.
435 # Remember, too, that the installation directory variables ($(bindir) and
436 # friends can be overridden from their original settings in mk/config.mk.in
439 .PHONY: install installdirs install-strip install-dirs uninstall install-docs show-install
442 @echo "bindir = $(bindir)"
443 @echo "libdir = $(libdir)"
444 @echo "libexecdir = $(libexecdir) # by default, same as libdir"
445 @echo "datadir = $(datadir) # unused for ghc project"
448 # Sometimes useful to separate out the creation of install directories
449 # from the installation itself.
452 @$(INSTALL_DIR) $(bindir)
453 @$(INSTALL_DIR) $(libdir)
454 @$(INSTALL_DIR) $(libexecdir)
455 @$(INSTALL_DIR) $(datadir)
457 # Better do this first...
458 # but we won't for the moment, do it on-demand from
459 # within the various install targets instead.
460 #install:: install-dirs
462 ifneq "$(INSTALL_PROGS)" ""
463 install:: $(INSTALL_PROGS)
464 @$(INSTALL_DIR) $(bindir)
465 for i in $(INSTALL_PROGS); do \
466 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i$(exeext) $(bindir); \
471 # Just like INSTALL_PROGS, but prefix with install sites bin/lib/data and
472 # install without stripping.
474 ifneq "$(INSTALL_SCRIPTS)" ""
475 install:: $(INSTALL_SCRIPTS)
476 @$(INSTALL_DIR) $(bindir)
477 ifeq "$(INTERP)" "perl"
478 ifneq "$(BIN_DIST)" "1"
479 @for i in $(INSTALL_SCRIPTS); do \
481 echo "#! $(PERL)" > $$i.tmp ; \
482 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
483 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
484 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
485 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
486 cat $$i >> $$i.tmp ; \
487 echo $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_OPTS)) $$i.tmp $(bindir)/$$i ; \
488 $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_BIN_OPTS)) $$i.tmp $(bindir)/$$i ; \
492 for i in $(INSTALL_SCRIPTS); do \
493 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
497 for i in $(INSTALL_SCRIPTS); do \
498 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
503 ifneq "$(INSTALL_LIB_SCRIPTS)" ""
504 install:: $(INSTALL_LIB_SCRIPTS)
505 @$(INSTALL_DIR) $(libdir)
506 ifeq "$(INTERP)" "perl"
507 ifneq "$(BIN_DIST)" "1"
508 @for i in $(INSTALL_LIB_SCRIPTS); do \
510 echo "#! $(PERL)" > $$i.tmp ; \
511 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
512 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
513 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
514 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
515 cat $$i >> $$i.tmp ; \
516 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir) ; \
517 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libdir)/$$i ; \
521 for i in $(INSTALL_LIB_SCRIPTS); do \
522 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
526 for i in $(INSTALL_LIB_SCRIPTS); do \
527 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
532 ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
533 install:: $(INSTALL_LIBEXEC_SCRIPTS)
534 @$(INSTALL_DIR) $(libexecdir)
535 ifeq "$(INTERP)" "perl"
536 ifneq "$(BIN_DIST)" "1"
537 @for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
539 echo "#! $(PERL)" > $$i.tmp ; \
540 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
541 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
542 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
543 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
544 cat $$i >> $$i.tmp ; \
545 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir) ; \
546 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libexecdir)/$$i ; \
550 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
551 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
555 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
556 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
561 ifneq "$(INSTALL_LIBS)" ""
562 install:: $(INSTALL_LIBS)
563 @$(INSTALL_DIR) $(libdir)
564 for i in $(INSTALL_LIBS); do \
567 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
568 $(RANLIB) $(libdir)/`basename $$i` ;; \
570 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
575 ifneq "$(INSTALL_LIBEXECS)" ""
576 install:: $(INSTALL_LIBEXECS)
577 @$(INSTALL_DIR) $(libexecdir)
578 -for i in $(INSTALL_LIBEXECS); do \
579 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i$(exeext) $(libexecdir); \
583 ifneq "$(INSTALL_DATAS)" ""
584 install:: $(INSTALL_DATAS)
585 @$(INSTALL_DIR) $(datadir)
586 for i in $(INSTALL_DATAS); do \
587 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(datadir); \
595 ifeq ($(INSTALL_PROGS),)
596 @for i in $(INSTALL_PROGS) ; do \
597 echo rm -f $(bindir)/`basename $$i`; \
598 rm -f $(bindir)/`basename $$i`; \
601 ifeq ($(INSTALL_LIBS),)
602 @for i in $(INSTALL_LIBS); do \
603 echo rm -f $(libdir)/`basename $$i`; \
604 rm -f $(libdir)/`basename $$i`; \
607 ifeq ($(INSTALL_LIBEXECS),)
608 @for i in $(INSTALL_LIBEXECS); do \
609 echo rm -f $(libexecdir)/`basename $$i`; \
610 rm -f $(libexecdir)/`basename $$i`; \
613 ifeq ($(INSTALL_DATAS),)
614 @for i in $(INSTALL_DATAS); do \
615 echo rm -f $(datadir)/`basename $$i`; \
616 rm -f $(datadir)/`basename $$i`; \
621 # install-strip is from the GNU Makefile standard.
625 @$(MAKE) EXTRA_INSTALL_OPTS='-s' install
628 ###########################################
630 # Targets: dist binary-dist
632 ###########################################
636 # dist-pre is a canned rule the toplevel of your source tree
637 # would use as follows,
641 # it performs two tasks, first creating the distribution directory
642 # tree and it then decorates the new tree with symbolic links pointing
643 # to the symbolic links in the build tree.
645 # The dist-pre relies on (at least) the `find' in GNU findutils
646 # (only tested with version 4.1). All non-GNU `find's I have
647 # laid on my hands locally, has a restrictive treatment of {} in
648 # -exec commands, i.e.,
650 # find . -print echo a{} \;
652 # does not expand the {}, it has to be a separate argument (i.e. `a {}').
653 # GNU find is (IMHO) more sensible here, expanding any {} it comes across
654 # inside an -exec, whether it is a separate arg or part of a word:
658 # GNU find version 4.1
659 # $ find yes -exec echo oh,{}! \;
662 # Of course, the above is not impossible to achieve with other finds,
663 # just that GNU find does the Patently Right Thing here :)
665 # ====> if you're using these dist rules, get hold of GNU findutils.
669 .PHONY: dist dist-pre dist-post
672 # The dist rules leaves out CVS, SRC (from mkshadowdir) and tests
673 # directories when creating shadow source distrib tree
676 -rm -rf $(SRC_DIST_DIR)
677 -rm -f $(SRC_DIST_NAME).tar.gz
678 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -exec $(MKDIRHIER) $(SRC_DIST_DIR)/{} \; \) ; )
679 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -type l -exec $(LN_S) $(FPTOOLS_TOP_ABS)/{} $(SRC_DIST_DIR)/{} \; )
682 # After having created a shadow distribution tree and copied/linked
683 # all the necessary files to it, `dist-post' makes sure the permissions
684 # are set right and then package up the tree. Empty directories are also removed.
686 # For now, we make the packaging a separate rule, so as to allow
687 # the inspection of the dist tree before eventually packaging it up.
690 @echo Deleting the following empty directories..
691 ( cd $(SRC_DIST_DIR) ; cd .. ; find $(SRC_DIST_NAME) -type d -exec sh -c 'test x`ls $$0 | wc -l | sed -e "s/ //g"` = x0' {} \; -print -exec rm -rf {} \; -prune )
692 ( cd $(SRC_DIST_DIR) ; cd .. ; chmod -R a+rw $(SRC_DIST_NAME) )
695 cd $(SRC_DIST_DIR); cd ..; $(TAR) chzf $(SRC_DIST_NAME).tar.gz $(SRC_DIST_NAME)
700 # The default dist rule:
702 # copy/link the contents of $(SRC_DIST_FILES) into the
703 # shadow distribution tree. SRC_DIST_FILES contain the
704 # build-generated files that you want to include in
705 # a source distribution.
708 ifneq "$(SRC_DIST_FILES)" ""
710 @for i in $(SRC_DIST_FILES); do \
711 if (test -f "$$i"); then \
712 echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
713 $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
719 # binary-dist creates a binary bundle, set BIN_DIST_NAME
720 # to package name and do `make binary-dist' (normally this
721 # just a thing you would do from the toplevel of fptools or)
722 # from the top of a project.
724 .PHONY: binary-dist-pre binary-dist binary-pack
727 -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
728 -rm -f $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
729 @for i in $(BIN_DIST_DIRS); do \
730 if (test -d "$$i"); then \
731 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
732 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
733 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
734 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion); \
735 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion); \
736 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion); \
737 echo $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
738 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
739 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
740 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
741 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
742 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
743 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion) ; \
744 $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
745 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
746 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
747 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
748 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
749 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i-$(ProjectVersion) \
750 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$$i-$(ProjectVersion) ; \
755 # Do this separately for now
758 ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME); rm -rf $(BIN_DIST_NAME) )
762 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
763 gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
768 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec rm -f {} \; )
771 ###########################################
773 # Targets: check tags show info
775 ###########################################
777 #------------------------------------------------------------
783 @for i in $(filter-out %.lhs .hs, $(TESTS)) ''; do \
784 if (test -f "$$i"); then \
785 echo Running: `basename $$i` ; \
786 cd test; `basename $$i` ; \
790 #------------------------------------------------------------
798 ifneq "$(HS_SRCS)" ""
799 $(HSTAGS) $(HSTAGS_OPTS) -- $(TAGS_HS_SRCS)
802 etags -a $(TAGS_C_SRCS)
804 @( DEREFFED=`ls -l Makefile | sed -e 's/.*-> \(.*\)/\1/g'` && $(RM) `dirname $$DEREFFED`/TAGS && $(CP) TAGS `dirname $$DEREFFED` ) || echo TAGS file generated, perhaps copy over to source tree?
806 #------------------------------------------------------------
808 # to see the effective value used for a Makefile variable, do
809 # make show VALUE=MY_VALUE
813 @echo '$(VALUE)=$($(VALUE))'
815 #------------------------------------------------------------
818 .PHONY: dvi ps html info txt
828 # Building literate root documents requires extra treatment,
829 # as the root files need to be processed different from other
830 # literate files (`compile' them into .itex with the -S (standalone)
831 # option) and then link together a master TeX document with
834 $(filter %.tex,$(patsubst %.lit,%.tex,$(DOC_SRCS))) :
836 $(LIT2LATEX) -S -c $(LIT2LATEX_OPTS) -o $(patsubst %.tex,%.itex,$@) $(addsuffix .lit,$(basename $@))
837 $(LIT2LATEX) -S $(LIT2LATEX_OPTS) -o $@ $(addsuffix .itex,$(basename $@))
840 # Ditto for texi and html
842 $(filter %.texi,$(patsubst %.lit,%.texi,$(DOC_SRCS))) :
844 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.texi,%.itxi,$@) $(addsuffix .lit,$(basename $@))
845 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $@ $(addsuffix .itxi,$(basename $@))
848 # Rather than using lit2html, we opt for the lit-texi-html route,
849 # and use texi2html as our HTML backend.
850 # (Note: we need to change mkdependlit to get this really off the ground)
852 # If the generated html representation is split up into a myriad of files,
853 # put the files in a subdirectory html/, if a monolith is created, park
854 # the generated file in the same dir as the .lit file.
856 $(filter %.html,$(patsubst %.lit,%.html,$(DOC_SRCS))) : $(filter %.lit,$(DOC_SRCS))
857 $(RM) $@ $(patsubst %.html,%.texi,$@) $(patsubst %.html,%.itxi,$@)
858 ifneq "$(filter -monolithic,$(TEXI2HTML_OPTS))" ""
859 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
860 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
861 $(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@)
862 cp $(TEXI2HTML_PREFIX)invisible.xbm .
864 $(RM) html/$(basename $@)*
866 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
867 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o html/$(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
868 (cd html; ../$(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@); cd ..)
869 cp $(TEXI2HTML_PREFIX)invisible.xbm html/
872 ###########################################
876 ###########################################
878 .PHONY: realclean mostlyclean clean distclean maintainer-clean
880 # realclean is just a synonym for maintainer-clean
881 realclean: maintainer-clean
884 ifneq "$(MOSTLY_CLEAN_FILES)" ""
886 rm -f $(MOSTLY_CLEAN_FILES)
889 ifneq "$(CLEAN_FILES)" ""
895 ifneq "$(DIST_CLEAN_FILES)" ""
896 distclean:: mostlyclean clean
897 rm -f $(DIST_CLEAN_FILES)
901 ifneq "$(MAINTAINER_CLEAN_FILES)" ""
902 maintainer-clean:: mostlyclean clean distclean
903 @echo 'This command is intended for maintainers to use; it'
904 @echo 'deletes files that may need special tools to rebuild.'
905 rm -f $(MAINTAINER_CLEAN_FILES)
909 # If (Haskell) object files are split, cleaning up
910 # consist of descending into the directories where
911 # the myriads of object files have been put.
914 ifneq "$(HS_OBJS)" ""
915 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
917 find $(patsubst %.$(way_)o,%,$(HS_OBJS)) -name '*.$(way_)o' -print | xargs $(RM) __rm_food
918 -rmdir $(patsubst %.$(way_)o,%,$(HS_OBJS))
923 #################################################################################
927 #################################################################################
929 # Here is the ingenious jiggery pokery that allows you to build multiple versions
930 # of a program in a single build tree.
932 # The ways setup requires the following variables to be set:
934 # Expects: $(WAYS) the possible "way" strings to one of
935 # which $(way) will be set
938 # So how does $(way) ever get set to anything? Answer, we recursively
939 # invoke make, setting $(way) on the command line.
940 # When do we do this recursion? Answer: whenever the programmer
941 # asks make to make a target that involves a way suffix.
942 # We must remember *not* to recurse again; but that's easy: we
943 # just see if $(way) is set:
947 # If $(WAYS) = p mc, then WAY_TARGETS expands to
948 # %.p_lhs %.p_hs %.p_o ... %.mc_lhs %.p_hs ...
949 # and OTHER_WAY_TARGETS to
950 # %_p.a %_p %_mc.a %_mc
951 # where the suffixes are from $(SUFFIXES)
953 # We have to treat libraries and "other" targets differently,
954 # because their names are of the form
955 # libHS_p.a and Foo_p
956 # whereas everything else has names of the form
959 FPTOOLS_SUFFIXES := o hi hc
961 WAY_TARGETS = $(foreach way,$(WAYS),$(foreach suffix, $(FPTOOLS_SUFFIXES), %.$(way)_$(suffix)))
962 LIB_WAY_TARGETS = $(foreach way,$(WAYS),%_$(way).a %_$(way))
964 # $@ will be something like Foo.p_o
965 # $(suffix $@) returns .p_o
966 # $(subst .,.p_o) returns p_o
967 # $(subst _,.,p_o) returns p.o (clever)
968 # $(basename p.o) returns p
971 $(MAKE) way=$(basename $(subst _,.,$(subst .,,$(suffix $@)))) $@
973 # $(@F) will be something like libHS_p.a, or Foo_p
974 # $(basename $(@F)) will be libHS_p, or Foo_p
975 # The sed script extracts the "p" part.
978 $(MAKE) $(MFLAGS) $@ way=$(subst .,,$(suffix $(subst _,.,$(basename $@))))
983 ##################################################################
987 ##################################################################
989 # Here are the diabolically clever rules that
991 # (a) for each "recursive target" <t>
992 # propagates "make <t>" to directories in SUBDIRS
994 # (b) when SUBDIRS is empty,
995 # for each "multi-way-target" <t>
996 # calls "make -way=w <t>" for each w in $(WAYS)
998 # This has the effect of making the standard target
999 # in each of the specified ways (as well as in the normal way
1001 # Controlling variables
1002 # WAYS = extra (beyond the normal way) ways to build things in
1003 # SUBDIRS = subdirectories to recurse into
1005 # No ways, so iterate over the SUBDIRS
1008 ifneq "$(SUBDIRS)" ""
1010 all docs runtests boot TAGS clean veryclean maintainer-clean install info ::
1011 @echo "------------------------------------------------------------------------"
1012 @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
1013 @echo "PWD = $(shell pwd)"
1014 @echo "------------------------------------------------------------------------"
1015 @case '${MFLAGS}' in -*[ik]*) set +e;; *) set -e;; esac; \
1016 for i in $(SUBDIRS) ; do \
1017 echo "------------------------------------------------------------------------"; \
1018 echo "==fptools== $(MAKE) $@;"; \
1019 echo " in $(shell pwd)/$$i"; \
1020 echo "------------------------------------------------------------------------"; \
1021 $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
1023 @echo "------------------------------------------------------------------------"
1024 @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
1025 @echo "PWD = $(shell pwd)"
1026 @echo "------------------------------------------------------------------------"
1029 @case '${MFLAGS}' in -*[ik]*) set +e;; *) set -e;; esac; \
1030 for i in $(SUBDIRS) ; do \
1031 $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
1032 $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
1038 # Selectively building subdirectories.
1041 ifneq "$(SUBDIRS)" ""
1043 $(MAKE) -C $@ $(MFLAGS)
1049 # NB: the targets exclude
1051 # since these are way-independent
1052 all docs runtests TAGS clean veryclean maintainer-clean install ::
1053 @echo "------------------------------------------------------------------------"
1054 @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
1055 @echo "PWD = $(shell pwd)"
1056 @echo "------------------------------------------------------------------------"
1057 @case '${MFLAGS}' in -*[ik]*) set +e;; *) set -e;; esac; \
1058 for i in $(WAYS) ; do \
1059 echo "------------------------------------------------------------------------"; \
1060 echo "==fptools== $(MAKE) way=$$i $@;"; \
1061 echo "PWD = $(shell pwd)"; \
1062 echo "------------------------------------------------------------------------"; \
1063 $(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
1065 @echo "------------------------------------------------------------------------"
1066 @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
1067 @echo "PWD = $(shell pwd)"
1068 @echo "------------------------------------------------------------------------"