1 #################################################################################
5 # Standard targets for fptools
7 #################################################################################
10 # This file contain three groups of target rules:
16 # 2. GNU standard targets
18 # install* uninstall installcheck installdirs
19 # clean* distclean* mostlyclean* maintainer-clean*
25 # 3. Some of the above targets have a version that
26 # recursively invokes that target in sub-directories.
27 # This relies on the importing Makefile setting SUBDIRS
29 # The recursive targets are marked with a * above
37 ##################################################################
38 # FPtools standard targets
42 # The depend target has to cope with a set of files that may have
43 # different ways of computing their dependencies, i.e., a Haskell
44 # module's dependencies are computed differently from C files.
46 # Note that we don't compute dependencies automatically, i.e., have the
47 # .depend file be a target that is dependent on the Haskell+C sources,
48 # and then have the `depend' target depend on `.depend'. The reason for
49 # this is that when GNU make is processing the `include .depend' statement
50 # it records .depend as being a Makefile. Before doing any other processing,
51 # `make' will try to check to see if the Makefiles are up-to-date. And,
52 # surprisingly enough, .depend has a rule for it, so if any of the source
53 # files change, it will be invoked, *regardless* of what target you're making.
55 # So, for now, the dependencies has to be re-computed manually via `make depend'
56 # whenever a module changes its set of imports. Doing what was outlined above
57 # is only a small optimisation anyway, it would avoid the recomputation of
58 # dependencies if the .depend file was newer than any of the source modules.
62 # Compiler produced files that are targets of the source's imports.
63 MKDEPENDHS_OBJ_SUFFICES=o
65 depend :: $(MKDEPENDHS_SRCS) $(MKDEPENDC_SRCS)
68 ifneq "$(DOC_SRCS)" ""
69 $(MKDEPENDLIT) -o .depend $(MKDEPENDLIT_OPTS) $(filter %.lit,$(DOC_SRCS))
71 ifneq "$(MKDEPENDC_SRCS)" ""
72 $(MKDEPENDC) -f .depend $(MKDEPENDC_OPTS) -- $(CC_OPTS) -- $(MKDEPENDC_SRCS)
74 ifneq "$(MKDEPENDHS_SRCS)" ""
75 $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-optdep-o -optdep$(obj)) $(MKDEPENDHS_OPTS) $(patsubst -odir,,$(HC_OPTS)) $(MKDEPENDHS_SRCS)
78 # the above patsubst is a hack to remove the '-odir $*' from HC_OPTS
79 # which is present when we're splitting objects. The $* maps to
80 # nothing, since this isn't a pattern rule, so we have to get rid of
81 # the -odir too to avoid problems.
83 ##################################################################
86 # The boot target, at a minimum generates dependency information
92 ##################################################################
93 # GNU Standard targets
95 # Every Makefile should define the following targets
98 # Compile the entire program. This should be the default target.
99 # This target need not rebuild any documentation files; Info files
100 # should normally be included in the distribution, and DVI files
101 # should be made only when explicitly asked for.
104 # Compile the program and copy the executables, libraries, and so on
105 # to the file names where they should reside for actual use. If
106 # there is a simple test to verify that a program is properly
107 # installed, this target should run that test.
109 # The commands should create all the directories in which files are
110 # to be installed, if they don't already exist. This includes the
111 # directories specified as the values of the variables prefix and
112 # exec_prefix , as well as all subdirectories that are needed. One
113 # way to do this is by means of an installdirs target as described
116 # Use `-' before any command for installing a man page, so that make
117 # will ignore any errors. This is in case there are systems that
118 # don't have the Unix man page documentation system installed.
120 # The way to install Info files is to copy them into `$(infodir)'
121 # with $(INSTALL_DATA) (see Command Variables), and then run the
122 # install-info program if it is present. install-info is a script
123 # that edits the Info `dir' file to add or update the menu entry for
124 # the given Info file; it will be part of the Texinfo package. Here
125 # is a sample rule to install an Info file:
127 # $(infodir)/foo.info: foo.info # There may be a newer info
128 # file in . than in srcdir.
129 # -if test -f foo.info; then d=.; \
130 # else d=$(srcdir); fi; \ $(INSTALL_DATA)
131 # $$d/foo.info $@; \ # Run install-info only if it
132 # exists. # Use `if' instead of just prepending `-' to the
133 # # line so we notice real errors from install-info. # We
134 # use `$(SHELL) -c' because some shells do not # fail
135 # gracefully when there is an unknown command.
136 # if $(SHELL) -c 'install-info --version' \
137 # >/dev/null 2>&1; then \ install-info
138 # --infodir=$(infodir) $$d/foo.info; \ else true;
142 # Delete all the installed files that the `install' target would
143 # create (but not the noninstalled files such as `make all' would
148 # Delete all files from the current directory that are normally
149 # created by building the program. Don't delete the files that
150 # record the configuration. Also preserve files that could be made
151 # by building, but normally aren't because the distribution comes
154 # Delete `.dvi' files here if they are not part of the
158 # Delete all files from the current directory that are created by
159 # configuring or building the program. If you have unpacked the
160 # source and built the program without creating any other files,
161 # `make distclean' should leave only the files that were in the
165 # Like `clean', but may refrain from deleting a few files that
166 # people normally don't want to recompile. For example, the
167 # `mostlyclean' target for GCC does not delete `libgcc.a', because
168 # recompiling it is rarely necessary and takes a lot of time.
171 # Delete everything from the current directory that can be
172 # reconstructed with this Makefile. This typically includes
173 # everything deleted by distclean , plus more: C source files
174 # produced by Bison, tags tables, Info files, and so on.
176 # One exception, however: `make maintainer-clean' should not delete
177 # `configure' even if `configure' can be remade using a rule in the
178 # Makefile. More generally, `make maintainer-clean' should not delete
179 # anything that needs to exist in order to run `configure' and then
180 # begin to build the program.
183 # Update a tags table for this program.
186 # Generate any Info files needed. The best way to write the rules is
191 # foo.info: foo.texi chap1.texi chap2.texi
192 # $(MAKEINFO) $(srcdir)/foo.texi
194 # You must define the variable MAKEINFO in the Makefile. It should
195 # run the makeinfo program, which is part of the Texinfo
199 # Generate DVI files for all TeXinfo documentation. For example:
203 # foo.dvi: foo.texi chap1.texi chap2.texi
204 # $(TEXI2DVI) $(srcdir)/foo.texi
206 # You must define the variable TEXI2DVI in the Makefile. It should
207 # run the program texi2dvi , which is part of the Texinfo
208 # distribution. Alternatively, write just the dependencies, and
209 # allow GNU Make to provide the command.
211 # ps is a FPtools addition for Postscript files
213 # `dist' `binary-dist'
214 # Create a distribution tar file for this program. The tar file
215 # should be set up so that the file names in the tar file start with
216 # a subdirectory name which is the name of the package it is a
217 # distribution for. This name can include the version number.
219 # For example, the distribution tar file of GCC version 1.40 unpacks
220 # into a subdirectory named `gcc-1.40'.
222 # The easiest way to do this is to create a subdirectory
223 # appropriately named, use ln or cp to install the proper files in
224 # it, and then tar that subdirectory.
226 # The dist target should explicitly depend on all non-source files
227 # that are in the distribution, to make sure they are up to date in
228 # the distribution. See Making Releases.
230 # binary-dist is an FPtools addition for binary distributions
233 # Perform self-tests (if any). The user must build the program
234 # before running the tests, but need not install the program; you
235 # should write the self-tests so that they work when the program is
236 # built but not installed.
238 # The following targets are suggested as conventional names, for programs
239 # in which they are useful.
242 # Perform installation tests (if any). The user must build and
243 # install the program before running the tests. You should not
244 # assume that `$(bindir)' is in the search path.
247 # It's useful to add a target named `installdirs' to create the
248 # directories where files are installed, and their parent
249 # directories. There is a script called `mkinstalldirs' which is
250 # convenient for this; find it in the Texinfo package.
251 # (FPTOOLS: we use a close relative of the suggested script, situated
252 # in glafp-utils/mkdirhier -- SOF)
257 ###########################################
261 ###########################################
263 # For each of these variables that is defined
264 # we generate one "all" rule and one rule for the variable itself:
266 # HS_PROG Haskell program
269 # SCRIPT_PROG Script (e.g. Perl script)
271 # For details of exactly what rule is generated, see the
272 # relevant section below
276 #----------------------------------------
279 ifneq "$(HS_PROG)" ""
282 $(HS_PROG) :: $(HS_OBJS)
283 $(HC) -o $@ $(HC_OPTS) $(LD_OPTS) $(HS_OBJS) $(LIBS)
286 #----------------------------------------
292 $(C_PROG) :: $(C_OBJS)
293 $(CC) -o $@ $(CC_OPTS) $(LD_OPTS) $(C_OBJS) $(LIBS)
297 #----------------------------------------
300 ifneq "$(LIBRARY)" ""
306 $(AR) $(AR_OPTS) $@ $(LIBOBJS)
311 # For Haskell object files, we might have chosen to split
312 # up the object files. Test for whether the library being
313 # built is consisting of Haskell files by (hackily) checking
314 # whether HS_SRCS is empty or not.
317 ifneq "$(HS_SRCS)" ""
318 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
321 TMPDIR=$(TMPDIR); export TMPDIR; find $(patsubst %.$(way_)o,%,$(LIBOBJS)) -name '*.$(way_)o' -print | xargs ar q $@
327 $(LIBRARY) :: $(LIBOBJS)
331 #----------------------------------------
334 ifneq "$(SCRIPT_PROG)" ""
336 # To produce a fully functional script, you may
337 # have to add some configuration variables at the top of
338 # the script, i.e., the compiler driver needs to know
339 # the path to various utils in the build tree for instance.
341 # To have the build rule for the script automatically do this
342 # for you, set the variable SCRIPT_SUBST_VARS to the list of
343 # variables you need to put in.
346 # SCRIPT_SUBST creates a string of echo commands that
347 # will when evaluated append the (perl)variable name and its value
348 # to the target it is used for, i.e.,
352 # SCRIPT_SUBST_VARS = A B
353 # SCRIPT_SUBST=echo "$""A=\"foo\";" >> $@; echo "$""B=\"bar\";" >> $@
355 # so if you have a rule like the following
360 # @eval $(SCRIPT_SUBST)
362 # `make foo' would create a file `foo' containing the following
369 # ToDo: make this work for shell scripts (drop the initial $).
371 ifeq "$(INTERP)" "$(SHELL)"
372 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$(val)=\\\"$($(val))\\\";\" >> $@;")
374 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$$\"\"$(val)=\\\"$($(val))\\\";\" >> $@;")
377 all :: $(SCRIPT_PROG)
380 # #! support under cygwin32 is not quite there yet,
381 # so we rely on the eval `trick' instead. On all other
382 # platforms, we prepend #!$(INTERP) -- SOF 6/97
385 $(SCRIPT_PROG) :: $(SCRIPT_OBJS)
388 ifeq "$(INTERP)" "perl"
389 ifneq "$(BIN_DIST)" "1"
390 echo "#! "$(PERL) > $@
396 @echo "#!"$(INTERP) > $@
401 ifneq "$(SCRIPT_PREFIX_FILES)" ""
402 @cat $(SCRIPT_PREFIX_FILES) >> $@
404 @eval $(SCRIPT_SUBST)
405 @cat $(SCRIPT_OBJS) >> $@
411 ###########################################
413 # Targets: install install-strip uninstall
415 ###########################################
417 # For each of these variables that is defined, you
418 # get one install rule
420 # INSTALL_PROGS executable programs in $(bindir)
421 # INSTALL_SCRIPTS executable scripts in $(bindir)
422 # INSTALL_LIBS platform-dependent libraries in $(libdir) (ranlib'ed)
423 # INSTALL_LIBEXECS platform-dependent execs in $(libdir)
424 # INSTALL_DATAS platform-independent files in $(datadir)
426 # If the installation directory variable is undefined, the install rule simply
427 # emits a suitable error message.
429 # Remember, too, that the installation directory variables ($(bindir) and
430 # friends can be overridden from their original settings in mk/config.mk.in
433 .PHONY: install installdirs install-strip install-dirs uninstall install-docs show-install
436 @echo "bindir = $(bindir)"
437 @echo "libdir = $(libdir)"
438 @echo "libexecdir = $(libexecdir) # by default, same as libdir"
439 @echo "datadir = $(datadir) # unused for ghc project"
442 # Sometimes useful to separate out the creation of install directories
443 # from the installation itself.
446 @$(INSTALL_DIR) $(bindir)
447 @$(INSTALL_DIR) $(libdir)
448 @$(INSTALL_DIR) $(libexecdir)
449 @$(INSTALL_DIR) $(datadir)
451 # Better do this first...
452 # but we won't for the moment, do it on-demand from
453 # within the various install targets instead.
454 #install:: install-dirs
456 ifneq "$(INSTALL_PROGS)" ""
457 install:: $(INSTALL_PROGS)
458 @$(INSTALL_DIR) $(bindir)
459 for i in $(INSTALL_PROGS); do \
460 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i$(exeext) $(bindir); \
465 # Just like INSTALL_PROGS, but prefix with install sites bin/lib/data and
466 # install without stripping.
468 ifneq "$(INSTALL_SCRIPTS)" ""
469 install:: $(INSTALL_SCRIPTS)
470 @$(INSTALL_DIR) $(bindir)
471 ifeq "$(INTERP)" "perl"
472 ifneq "$(BIN_DIST)" "1"
473 @for i in $(INSTALL_SCRIPTS); do \
475 echo "#! $(PERL)" > $$i.tmp ; \
476 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
477 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
478 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
479 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
480 cat $$i >> $$i.tmp ; \
481 echo $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_OPTS)) $$i.tmp $(bindir)/$$i ; \
482 $(INSTALL_PROGRAM) $(filter-out -s,$(INSTALL_BIN_OPTS)) $$i.tmp $(bindir)/$$i ; \
486 for i in $(INSTALL_SCRIPTS); do \
487 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
491 for i in $(INSTALL_SCRIPTS); do \
492 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(bindir); \
497 ifneq "$(INSTALL_LIB_SCRIPTS)" ""
498 install:: $(INSTALL_LIB_SCRIPTS)
499 @$(INSTALL_DIR) $(libdir)
500 ifeq "$(INTERP)" "perl"
501 ifneq "$(BIN_DIST)" "1"
502 @for i in $(INSTALL_LIB_SCRIPTS); do \
504 echo "#! $(PERL)" > $$i.tmp ; \
505 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
506 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
507 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
508 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
509 cat $$i >> $$i.tmp ; \
510 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir) ; \
511 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libdir)/$$i ; \
515 for i in $(INSTALL_LIB_SCRIPTS); do \
516 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
520 for i in $(INSTALL_LIB_SCRIPTS); do \
521 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libdir); \
526 ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
527 install:: $(INSTALL_LIBEXEC_SCRIPTS)
528 @$(INSTALL_DIR) $(libexecdir)
529 ifeq "$(INTERP)" "perl"
530 ifneq "$(BIN_DIST)" "1"
531 @for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
533 echo "#! $(PERL)" > $$i.tmp ; \
534 echo '$$'"bindir='$(bindir)';" >> $$i.tmp ; \
535 echo '$$'"libdir='$(libdir)';" >> $$i.tmp ; \
536 echo '$$'"libexecdir='$(libexecdir)';" >> $$i.tmp ; \
537 echo '$$'"datadir='$(datadir)';" >> $$i.tmp ; \
538 cat $$i >> $$i.tmp ; \
539 echo $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir) ; \
540 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i.tmp $(libexecdir)/$$i ; \
544 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
545 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
549 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
550 $(INSTALL_PROGRAM) $(INSTALL_OPTS) $$i $(libexecdir); \
555 ifneq "$(INSTALL_LIBS)" ""
556 install:: $(INSTALL_LIBS)
557 @$(INSTALL_DIR) $(libdir)
558 for i in $(INSTALL_LIBS); do \
561 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
562 $(RANLIB) $(libdir)/`basename $$i` ;; \
564 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
569 ifneq "$(INSTALL_LIBEXECS)" ""
570 install:: $(INSTALL_LIBEXECS)
571 @$(INSTALL_DIR) $(libexecdir)
572 -for i in $(INSTALL_LIBEXECS); do \
573 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i$(exeext) $(libexecdir); \
577 ifneq "$(INSTALL_DATAS)" ""
578 install:: $(INSTALL_DATAS)
579 @$(INSTALL_DIR) $(datadir)
580 for i in $(INSTALL_DATAS); do \
581 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(datadir); \
589 ifeq ($(INSTALL_PROGS),)
590 @for i in $(INSTALL_PROGS) ; do \
591 echo rm -f $(bindir)/`basename $$i`; \
592 rm -f $(bindir)/`basename $$i`; \
595 ifeq ($(INSTALL_LIBS),)
596 @for i in $(INSTALL_LIBS); do \
597 echo rm -f $(libdir)/`basename $$i`; \
598 rm -f $(libdir)/`basename $$i`; \
601 ifeq ($(INSTALL_LIBEXECS),)
602 @for i in $(INSTALL_LIBEXECS); do \
603 echo rm -f $(libexecdir)/`basename $$i`; \
604 rm -f $(libexecdir)/`basename $$i`; \
607 ifeq ($(INSTALL_DATAS),)
608 @for i in $(INSTALL_DATAS); do \
609 echo rm -f $(datadir)/`basename $$i`; \
610 rm -f $(datadir)/`basename $$i`; \
615 # install-strip is from the GNU Makefile standard.
619 @$(MAKE) EXTRA_INSTALL_OPTS='-s' install
622 ###########################################
624 # Targets: dist binary-dist
626 ###########################################
630 # dist-pre is a canned rule the toplevel of your source tree
631 # would use as follows,
635 # it performs two tasks, first creating the distribution directory
636 # tree and it then decorates the new tree with symbolic links pointing
637 # to the symbolic links in the build tree.
639 # The dist-pre relies on (at least) the `find' in GNU findutils
640 # (only tested with version 4.1). All non-GNU `find's I have
641 # laid on my hands locally, has a restrictive treatment of {} in
642 # -exec commands, i.e.,
644 # find . -print echo a{} \;
646 # does not expand the {}, it has to be a separate argument (i.e. `a {}').
647 # GNU find is (IMHO) more sensible here, expanding any {} it comes across
648 # inside an -exec, whether it is a separate arg or part of a word:
652 # GNU find version 4.1
653 # $ find yes -exec echo oh,{}! \;
656 # Of course, the above is not impossible to achieve with other finds,
657 # just that GNU find does the Patently Right Thing here :)
659 # ====> if you're using these dist rules, get hold of GNU findutils.
663 .PHONY: dist dist-pre dist-post
666 # The dist rules leaves out CVS, SRC (from mkshadowdir) and tests
667 # directories when creating shadow source distrib tree
670 -rm -rf $(SRC_DIST_DIR)
671 -rm -f $(SRC_DIST_NAME).tar.gz
672 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -exec $(MKDIRHIER) $(SRC_DIST_DIR)/{} \; \) ; )
673 (cd $(FPTOOLS_TOP_ABS); find $(SRC_DIST_DIRS) -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -type l -exec $(LN_S) $(FPTOOLS_TOP_ABS)/{} $(SRC_DIST_DIR)/{} \; )
676 # After having created a shadow distribution tree and copied/linked
677 # all the necessary files to it, `dist-post' makes sure the permissions
678 # are set right and then package up the tree. Empty directories are also removed.
680 # For now, we make the packaging a separate rule, so as to allow
681 # the inspection of the dist tree before eventually packaging it up.
684 @echo Deleting the following empty directories..
685 ( cd $(SRC_DIST_DIR) ; cd .. ; find $(SRC_DIST_NAME) -type d -exec sh -c 'test x`ls $$0 | wc -l | sed -e "s/ //g"` = x0' {} \; -print -exec rm -rf {} \; -prune )
686 ( cd $(SRC_DIST_DIR) ; cd .. ; chmod -R a+rw $(SRC_DIST_NAME) )
689 cd $(SRC_DIST_DIR); cd ..; $(TAR) chzf $(SRC_DIST_NAME).tar.gz $(SRC_DIST_NAME)
694 # The default dist rule:
696 # copy/link the contents of $(SRC_DIST_FILES) into the
697 # shadow distribution tree. SRC_DIST_FILES contain the
698 # build-generated files that you want to include in
699 # a source distribution.
702 ifneq "$(SRC_DIST_FILES)" ""
704 @for i in $(SRC_DIST_FILES); do \
705 if (test -f "$$i"); then \
706 echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
707 $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
713 # binary-dist creates a binary bundle, set BIN_DIST_NAME
714 # to package name and do `make binary-dist' (normally this
715 # just a thing you would do from the toplevel of fptools or)
716 # from the top of a project.
718 .PHONY: binary-dist-pre binary-dist binary-pack
721 -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
722 -rm -f $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
723 @for i in $(BIN_DIST_DIRS); do \
724 if test -d "$$i"; then \
725 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
726 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
727 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
728 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion); \
729 echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion); \
730 $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion); \
731 echo $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
732 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
733 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
734 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
735 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
736 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
737 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion) ; \
738 $(MAKE) -C $$i $(MFLAGS) install BIN_DIST=1 BIN_DIST_NAME=$(BIN_DIST_NAME) \
739 prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
740 exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
741 bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
742 libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
743 libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$(ProjectNameShort)-$(ProjectVersion) \
744 datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share/$(ProjectNameShort)-$(ProjectVersion) ; \
749 # Do this separately for now
752 ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME); rm -rf $(BIN_DIST_NAME) )
756 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
757 gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
762 ( cd $(BIN_DIST_TMPDIR); find $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec rm -f {} \; )
765 ###########################################
767 # Targets: check tags show info
769 ###########################################
771 #------------------------------------------------------------
777 @for i in $(filter-out %.lhs .hs, $(TESTS)) ''; do \
778 if (test -f "$$i"); then \
779 echo Running: `basename $$i` ; \
780 cd test; `basename $$i` ; \
784 #------------------------------------------------------------
792 ifneq "$(HS_SRCS)" ""
793 $(HSTAGS) $(HSTAGS_OPTS) -- $(TAGS_HS_SRCS)
796 etags -a $(TAGS_C_SRCS)
798 @( DEREFFED=`ls -l Makefile | sed -e 's/.*-> \(.*\)/\1/g'` && $(RM) `dirname $$DEREFFED`/TAGS && $(CP) TAGS `dirname $$DEREFFED` ) || echo TAGS file generated, perhaps copy over to source tree?
800 #------------------------------------------------------------
802 # to see the effective value used for a Makefile variable, do
803 # make show VALUE=MY_VALUE
807 @echo '$(VALUE)=$($(VALUE))'
809 #------------------------------------------------------------
812 .PHONY: dvi ps html info txt
822 # Building literate root documents requires extra treatment,
823 # as the root files need to be processed different from other
824 # literate files (`compile' them into .itex with the -S (standalone)
825 # option) and then link together a master TeX document with
828 $(filter %.tex,$(patsubst %.lit,%.tex,$(DOC_SRCS))) :
830 $(LIT2LATEX) -S -c $(LIT2LATEX_OPTS) -o $(patsubst %.tex,%.itex,$@) $(addsuffix .lit,$(basename $@))
831 $(LIT2LATEX) -S $(LIT2LATEX_OPTS) -o $@ $(addsuffix .itex,$(basename $@))
834 # Ditto for texi and html
836 $(filter %.texi,$(patsubst %.lit,%.texi,$(DOC_SRCS))) :
838 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.texi,%.itxi,$@) $(addsuffix .lit,$(basename $@))
839 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $@ $(addsuffix .itxi,$(basename $@))
842 # Rather than using lit2html, we opt for the lit-texi-html route,
843 # and use texi2html as our HTML backend.
844 # (Note: we need to change mkdependlit to get this really off the ground)
846 # If the generated html representation is split up into a myriad of files,
847 # put the files in a subdirectory html/, if a monolith is created, park
848 # the generated file in the same dir as the .lit file.
850 $(filter %.html,$(patsubst %.lit,%.html,$(DOC_SRCS))) : $(filter %.lit,$(DOC_SRCS))
851 $(RM) $@ $(patsubst %.html,%.texi,$@) $(patsubst %.html,%.itxi,$@)
852 ifneq "$(filter -monolithic,$(TEXI2HTML_OPTS))" ""
853 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
854 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
855 $(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@)
856 cp $(TEXI2HTML_PREFIX)invisible.xbm .
858 $(RM) html/$(basename $@)*
860 $(LIT2TEXI) -S -c $(LIT2TEXI_OPTS) -o $(patsubst %.html,%.itxi,$@) $(addsuffix .lit,$(basename $@))
861 $(LIT2TEXI) -S $(LIT2TEXI_OPTS) -o html/$(patsubst %.html,%.texi,$@) $(addsuffix .itxi,$(basename $@))
862 (cd html; ../$(TEXI2HTML) $(TEXI2HTML_OPTS) $(patsubst %.html,%.texi,$@); cd ..)
863 cp $(TEXI2HTML_PREFIX)invisible.xbm html/
867 #--------------------------------------------------------------------------
870 # This will eventually replace the literate stuff for documentation
872 SGML_SRCS = $(wildcard *.sgml *.vsgml)
873 SGML_DVI = $(addsuffix .dvi, $(basename $(SGML_SRCS)))
874 SGML_PS = $(addsuffix .ps, $(basename $(SGML_SRCS)))
875 SGML_TEXI = $(addsuffix .texi, $(basename $(SGML_SRCS)))
876 SGML_INFO = $(addsuffix .info, $(basename $(SGML_SRCS)))
877 SGML_HTML = $(addsuffix .html, $(basename $(SGML_SRCS)))
878 SGML_TEXT = $(addsuffix .txt, $(basename $(SGML_SRCS)))
886 CLEAN_FILES += $(SGML_TEXT) $(SGML_HTML) $(SGML_TEXI) $(SGML_PS) $(SGML_DVI)
888 # suffix rules should handle the rest (for single-file docs at least).
890 ###########################################
894 ###########################################
896 .PHONY: realclean mostlyclean clean distclean maintainer-clean
898 # realclean is just a synonym for maintainer-clean
899 realclean: maintainer-clean
902 ifneq "$(MOSTLY_CLEAN_FILES)" ""
904 rm -f $(MOSTLY_CLEAN_FILES)
907 ifneq "$(CLEAN_FILES)" ""
913 ifneq "$(DIST_CLEAN_FILES)" ""
914 distclean:: mostlyclean clean
915 rm -f $(DIST_CLEAN_FILES)
919 ifneq "$(MAINTAINER_CLEAN_FILES)" ""
920 maintainer-clean:: mostlyclean clean distclean
921 @echo 'This command is intended for maintainers to use; it'
922 @echo 'deletes files that may need special tools to rebuild.'
923 rm -f $(MAINTAINER_CLEAN_FILES)
927 # If (Haskell) object files are split, cleaning up
928 # consist of descending into the directories where
929 # the myriads of object files have been put.
932 ifneq "$(HS_OBJS)" ""
933 ifneq "$(filter -split-objs,$(HC_OPTS))" ""
935 find $(patsubst %.$(way_)o,%,$(HS_OBJS)) -name '*.$(way_)o' -print | xargs $(RM) __rm_food
936 -rmdir $(patsubst %.$(way_)o,%,$(HS_OBJS))
941 #################################################################################
945 #################################################################################
947 # Here is the ingenious jiggery pokery that allows you to build multiple versions
948 # of a program in a single build tree.
950 # The ways setup requires the following variables to be set:
952 # Expects: $(WAYS) the possible "way" strings to one of
953 # which $(way) will be set
956 # So how does $(way) ever get set to anything? Answer, we recursively
957 # invoke make, setting $(way) on the command line.
958 # When do we do this recursion? Answer: whenever the programmer
959 # asks make to make a target that involves a way suffix.
960 # We must remember *not* to recurse again; but that's easy: we
961 # just see if $(way) is set:
965 # If $(WAYS) = p mc, then WAY_TARGETS expands to
966 # %.p_lhs %.p_hs %.p_o ... %.mc_lhs %.p_hs ...
967 # and OTHER_WAY_TARGETS to
968 # %_p.a %_p %_mc.a %_mc
969 # where the suffixes are from $(SUFFIXES)
971 # We have to treat libraries and "other" targets differently,
972 # because their names are of the form
973 # libHS_p.a and Foo_p
974 # whereas everything else has names of the form
977 FPTOOLS_SUFFIXES := o hi hc
979 WAY_TARGETS = $(foreach way,$(WAYS),$(foreach suffix, $(FPTOOLS_SUFFIXES), %.$(way)_$(suffix)))
980 LIB_WAY_TARGETS = $(foreach way,$(WAYS),%_$(way).a %_$(way))
982 # $@ will be something like Foo.p_o
983 # $(suffix $@) returns .p_o
984 # $(subst .,.p_o) returns p_o
985 # $(subst _,.,p_o) returns p.o (clever)
986 # $(basename p.o) returns p
989 $(MAKE) way=$(basename $(subst _,.,$(subst .,,$(suffix $@)))) $@
991 # $(@F) will be something like libHS_p.a, or Foo_p
992 # $(basename $(@F)) will be libHS_p, or Foo_p
993 # The sed script extracts the "p" part.
996 $(MAKE) $(MFLAGS) $@ way=$(subst .,,$(suffix $(subst _,.,$(basename $@))))
1001 ##################################################################
1005 ##################################################################
1007 # Here are the diabolically clever rules that
1009 # (a) for each "recursive target" <t>
1010 # propagates "make <t>" to directories in SUBDIRS
1012 # (b) when SUBDIRS is empty,
1013 # for each "multi-way-target" <t>
1014 # calls "make -way=w <t>" for each w in $(WAYS)
1016 # This has the effect of making the standard target
1017 # in each of the specified ways (as well as in the normal way
1019 # Controlling variables
1020 # WAYS = extra (beyond the normal way) ways to build things in
1021 # SUBDIRS = subdirectories to recurse into
1023 # No ways, so iterate over the SUBDIRS
1025 # note about recursively invoking make: we'd like make to drop all the
1026 # way back to the top level if it fails in any of the
1027 # sub(sub-...)directories. This is done by setting the -e flag to the
1028 # shell during the loop, which causes an immediate failure if any of
1029 # the shell commands fail.
1031 # One exception: if the user gave the -i or -k flag to make in the
1032 # first place, we'd like to reverse this behaviour. So we check for
1033 # these flags, and set the -e flag appropriately. NOTE: watch out for
1034 # the --no-print-directory flag which is passed to recursive
1035 # invocations of make.
1038 ifneq "$(SUBDIRS)" ""
1040 all docs runtests boot TAGS clean veryclean maintainer-clean install info ::
1041 @echo "------------------------------------------------------------------------"
1042 @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
1043 @echo "PWD = $(shell pwd)"
1044 @echo "------------------------------------------------------------------------"
1045 @case '${MFLAGS}' in *-[ik]*) set +e;; *-r*[ik]*) set +e;; *) set -e;; esac; \
1046 for i in $(SUBDIRS) ; do \
1047 echo "------------------------------------------------------------------------"; \
1048 echo "==fptools== $(MAKE) $@ $(MFLAGS);"; \
1049 echo " in $(shell pwd)/$$i"; \
1050 echo "------------------------------------------------------------------------"; \
1051 $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
1053 @echo "------------------------------------------------------------------------"
1054 @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
1055 @echo "PWD = $(shell pwd)"
1056 @echo "------------------------------------------------------------------------"
1059 @case '${MFLAGS}' in *-[ik]*) set +e;; *-r*[ik]*) set +e;; *) set -e;; esac; \
1060 for i in $(SUBDIRS) ; do \
1061 $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
1062 $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
1068 # Selectively building subdirectories.
1071 ifneq "$(SUBDIRS)" ""
1073 $(MAKE) -C $@ $(MFLAGS)
1079 # NB: the targets exclude
1081 # since these are way-independent
1082 all docs runtests TAGS clean veryclean maintainer-clean install ::
1083 @echo "------------------------------------------------------------------------"
1084 @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
1085 @echo "PWD = $(shell pwd)"
1086 @echo "------------------------------------------------------------------------"
1087 @case '${MFLAGS}' in *-[ik]*) set +e;; *-r*[ik]*) set +e;; *) set -e;; esac; \
1088 for i in $(WAYS) ; do \
1089 echo "------------------------------------------------------------------------"; \
1090 echo "==fptools== $(MAKE) way=$$i $@;"; \
1091 echo "PWD = $(shell pwd)"; \
1092 echo "------------------------------------------------------------------------"; \
1093 $(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
1095 @echo "------------------------------------------------------------------------"
1096 @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
1097 @echo "PWD = $(shell pwd)"
1098 @echo "------------------------------------------------------------------------"