1 #################################################################################
5 # Standard targets for fptools
7 #################################################################################
10 # This file contain three groups of target rules:
16 # 2. GNU standard targets
18 # install* uninstall installcheck installdirs
19 # clean* distclean* mostlyclean* maintainer-clean*
21 # dvi ps (no info) FPTOOLS adds: pdf rtf html
25 # 3. Some of the above targets have a version that
26 # recursively invokes that target in sub-directories.
27 # This relies on the importing Makefile setting SUBDIRS
29 # The recursive targets are marked with a * above
37 ##################################################################
41 # At the top of the file so that recursive makes happen before
42 # makes in the main directory. This is needed for some targets,
43 # e.g. when building DLLs in hslibs.
45 ##################################################################
47 # Here are the diabolically clever rules that
49 # (a) for each "recursive target" <t>
50 # propagates "make <t>" to directories in SUBDIRS
52 # (b) when SUBDIRS is empty,
53 # for each "multi-way-target" <t>
54 # calls "make -way=w <t>" for each w in $(WAYS)
56 # This has the effect of making the standard target
57 # in each of the specified ways (as well as in the normal way
59 # Controlling variables
60 # WAYS = extra (beyond the normal way) ways to build things in
61 # SUBDIRS = subdirectories to recurse into
63 # No ways, so iterate over the SUBDIRS
65 # note about recursively invoking make: we'd like make to drop all the
66 # way back to the top level if it fails in any of the
67 # sub(sub-...)directories. This is done by setting the -e flag to the
68 # shell during the loop, which causes an immediate failure if any of
69 # the shell commands fail.
71 # One exception: if the user gave the -i or -k flag to make in the
72 # first place, we'd like to reverse this behaviour. So we check for
73 # these flags, and set the -e flag appropriately. NOTE: watch out for
74 # the --no-print-directory flag which is passed to recursive
75 # invocations of make.
77 # NOTE: Truly weird use of exit below to stop the for loop dead in
78 # its tracks should any of the sub-makes fail. By my reckoning,
79 # "cmd || exit $?" should be equivalent to "cmd"
83 all docs runtests boot TAGS clean distclean mostlyclean maintainer-clean install html ps dvi txt::
84 @echo "------------------------------------------------------------------------"
85 @echo "===fptools== Recursively making \`$@' in $(SUBDIRS) ..."
86 @echo "PWD = $(shell pwd)"
87 @echo "------------------------------------------------------------------------"
88 # Don't rely on -e working, instead we check exit return codes from sub-makes.
89 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
90 for i in $(SUBDIRS); do \
91 echo "------------------------------------------------------------------------"; \
92 echo "==fptools== $(MAKE) $@ $(MFLAGS);"; \
93 echo " in $(shell pwd)/$$i"; \
94 echo "------------------------------------------------------------------------"; \
95 $(MAKE) --no-print-directory -C $$i $(MFLAGS) $@; \
96 if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
98 @echo "------------------------------------------------------------------------"
99 @echo "===fptools== Finished making \`$@' in $(SUBDIRS) ..."
100 @echo "PWD = $(shell pwd)"
101 @echo "------------------------------------------------------------------------"
104 # Don't rely on -e working, instead we check exit return codes from sub-makes.
105 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
106 for i in $(SUBDIRS) ; do \
107 $(MKDIRHIER_PREFIX)mkdirhier $(SRC_DIST_DIR)/$$i; \
108 $(MAKE) -C $$i $(MFLAGS) $@ SRC_DIST_DIR=$(SRC_DIST_DIR)/$$i; \
109 if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
113 # The default dist rule:
115 # copy/link the contents of $(SRC_DIST_FILES) into the
116 # shadow distribution tree. SRC_DIST_FILES contain the
117 # build-generated files that you want to include in
118 # a source distribution.
121 ifneq "$(SRC_DIST_FILES)" ""
123 @for i in $(SRC_DIST_FILES); do \
124 if ( echo "$$i" | grep "~" >/dev/null 2>&1 ); then \
125 echo $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
126 $(LN_S) `pwd`/`echo $$i | sed -e "s/^\([^~]*\)~.*/\1/g"` $(SRC_DIST_DIR)/`echo $$i | sed -e "s/.*~\(.*\)/\1/g"` ; \
128 if (test -f "$$i"); then \
129 echo $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
130 $(LN_S) `pwd`/$$i $(SRC_DIST_DIR)/$$i ; \
138 # Selectively building subdirectories.
141 ifneq "$(SUBDIRS)" ""
143 $(MAKE) -C $@ $(MFLAGS)
146 ##################################################################
147 # FPtools standard targets
151 # The depend target has to cope with a set of files that may have
152 # different ways of computing their dependencies, i.e., a Haskell
153 # module's dependencies are computed differently from C files.
155 # Note that we don't compute dependencies automatically, i.e., have the
156 # .depend file be a target that is dependent on the Haskell+C sources,
157 # and then have the `depend' target depend on `.depend'. The reason for
158 # this is that when GNU make is processing the `include .depend' statement
159 # it records .depend as being a Makefile. Before doing any other processing,
160 # `make' will try to check to see if the Makefiles are up-to-date. And,
161 # surprisingly enough, .depend has a rule for it, so if any of the source
162 # files change, it will be invoked, *regardless* of what target you're making.
164 # So, for now, the dependencies has to be re-computed manually via `make depend'
165 # whenever a module changes its set of imports. Doing what was outlined above
166 # is only a small optimisation anyway, it would avoid the recomputation of
167 # dependencies if the .depend file was newer than any of the source modules.
171 # Compiler produced files that are targets of the source's imports.
172 MKDEPENDHS_OBJ_SUFFICES=o
174 depend :: $(MKDEPENDHS_SRCS) $(MKDEPENDC_SRCS)
177 ifneq "$(DOC_SRCS)" ""
178 $(MKDEPENDLIT) -o .depend $(MKDEPENDLIT_OPTS) $(filter %.lit,$(DOC_SRCS))
180 ifneq "$(MKDEPENDC_SRCS)" ""
181 $(MKDEPENDC) -f .depend $(MKDEPENDC_OPTS) $(foreach way,$(WAYS),-s $(way)) -- $(CC_OPTS) -- $(MKDEPENDC_SRCS)
183 ifneq "$(MKDEPENDHS_SRCS)" ""
184 $(MKDEPENDHS) -M -optdep-f -optdep.depend $(foreach way,$(WAYS),-optdep-s -optdep$(way)) $(foreach obj,$(MKDEPENDHS_OBJ_SUFFICES),-osuf $(obj)) $(MKDEPENDHS_OPTS) $(HC_OPTS) $(MKDEPENDHS_SRCS)
188 ##################################################################
191 # The boot target, at a minimum generates dependency information
197 ##################################################################
198 # GNU Standard targets
200 # Every Makefile should define the following targets
203 # Compile the entire program. This should be the default target.
204 # This target need not rebuild any documentation files
207 # Compile the program and copy the executables, libraries, and so on
208 # to the file names where they should reside for actual use. If
209 # there is a simple test to verify that a program is properly
210 # installed, this target should run that test.
212 # The commands should create all the directories in which files are
213 # to be installed, if they don't already exist. This includes the
214 # directories specified as the values of the variables prefix and
215 # exec_prefix , as well as all subdirectories that are needed. One
216 # way to do this is by means of an installdirs target as described
219 # Use `-' before any command for installing a man page, so that make
220 # will ignore any errors. This is in case there are systems that
221 # don't have the Unix man page documentation system installed.
224 # Delete all the installed files that the `install' target would
225 # create (but not the noninstalled files such as `make all' would
230 # Delete all files from the current directory that are normally
231 # created by building the program. Don't delete the files that
232 # record the configuration. Also preserve files that could be made
233 # by building, but normally aren't because the distribution comes
236 # Delete `.dvi' files here if they are not part of the
240 # Delete all files from the current directory that are created by
241 # configuring or building the program. If you have unpacked the
242 # source and built the program without creating any other files,
243 # `make distclean' should leave only the files that were in the
247 # Like `clean', but may refrain from deleting a few files that
248 # people normally don't want to recompile. For example, the
249 # `mostlyclean' target for GCC does not delete `libgcc.a', because
250 # recompiling it is rarely necessary and takes a lot of time.
253 # Delete everything from the current directory that can be
254 # reconstructed with this Makefile. This typically includes
255 # everything deleted by distclean , plus more: C source files
256 # produced by Bison, tags tables, and so on.
258 # One exception, however: `make maintainer-clean' should not delete
259 # `configure' even if `configure' can be remade using a rule in the
260 # Makefile. More generally, `make maintainer-clean' should not delete
261 # anything that needs to exist in order to run `configure' and then
262 # begin to build the program.
265 # Update a tags table for this program.
267 # `dvi' `ps' `pdf' `html' `pdf'
268 # Generate DVI/PS/PDF files for LaTeX/DocBook docs. Not everything is
269 # supported everywhere, but the intention is to standardise on DocBook
270 # producing all formats.
272 # `dist' `binary-dist'
273 # Create a distribution tar file for this program. The tar file
274 # should be set up so that the file names in the tar file start with
275 # a subdirectory name which is the name of the package it is a
276 # distribution for. This name can include the version number.
278 # For example, the distribution tar file of GCC version 1.40 unpacks
279 # into a subdirectory named `gcc-1.40'.
281 # The easiest way to do this is to create a subdirectory
282 # appropriately named, use ln or cp to install the proper files in
283 # it, and then tar that subdirectory.
285 # The dist target should explicitly depend on all non-source files
286 # that are in the distribution, to make sure they are up to date in
287 # the distribution. See Making Releases.
289 # binary-dist is an FPtools addition for binary distributions
292 # Perform self-tests (if any). The user must build the program
293 # before running the tests, but need not install the program; you
294 # should write the self-tests so that they work when the program is
295 # built but not installed.
297 # The following targets are suggested as conventional names, for programs
298 # in which they are useful.
301 # Perform installation tests (if any). The user must build and
302 # install the program before running the tests. You should not
303 # assume that `$(bindir)' is in the search path.
306 # It's useful to add a target named `installdirs' to create the
307 # directories where files are installed, and their parent
308 # directories. There is a script called `mkinstalldirs' which is
309 # convenient for this; find it in the Texinfo package.
310 # (FPTOOLS: we use a close relative of the suggested script, situated
311 # in glafp-utils/mkdirhier -- SOF)
316 ###########################################
320 ###########################################
322 # For each of these variables that is defined
323 # we generate one "all" rule and one rule for the variable itself:
325 # HS_PROG Haskell program
328 # SCRIPT_PROG Script (e.g. Perl script)
330 # For details of exactly what rule is generated, see the
331 # relevant section below
335 #----------------------------------------
338 ifneq "$(HS_PROG)" ""
341 $(HS_PROG) :: $(HS_OBJS)
342 $(HC) -o $@ $(HC_OPTS) $(LD_OPTS) $(HS_OBJS) $(LIBS)
345 #----------------------------------------
351 $(C_PROG) :: $(C_OBJS)
352 $(CC) -o $@ $(CC_OPTS) $(LD_OPTS) $(C_OBJS) $(LIBS)
356 #----------------------------------------
359 ifneq "$(LIBRARY)" ""
365 $(AR) $(AR_OPTS) $@ $(STUBOBJS) $(LIBOBJS)
370 # For Haskell object files, we might have chosen to split
371 # up the object files. Test for whether the library being
372 # built is consisting of Haskell files by (hackily) checking
373 # whether HS_SRCS is empty or not.
376 ifneq "$(HS_SRCS)" ""
377 ifeq "$(SplitObjs)" "YES"
379 SRC_HC_OPTS += -split-objs
383 TMPDIR=$(TMPDIR); export TMPDIR; ( echo $(STUBOBJS) ; $(FIND) $(patsubst %.$(way_)o,%,$(LIBOBJS)) -name '*.$(way_)o' -print ) | xargs ar q $@
387 # Extra stuff for compiling Haskell files with $(SplitObjs):
390 $(RM) $@ ; if [ ! -d $(basename $@) ]; then mkdir $(basename $@); else \
391 $(FIND) $(basename $@) -name '*.$(way_)o' -print | xargs $(RM) __rm_food ; fi
392 HC_SPLIT_POST = touch $@
394 SRC_HC_PRE_OPTS += $(HC_SPLIT_PRE) ;
395 SRC_HC_POST_OPTS += $(HC_SPLIT_POST) ;
398 # If (Haskell) object files are split, cleaning up
399 # consist of descending into the directories where
400 # the myriads of object files have been put.
404 $(FIND) $(patsubst %.$(way_)o,%,$(HS_OBJS)) -name '*.$(way_)o' -print | xargs $(RM) __rm_food
405 -rmdir $(patsubst %.$(way_)o,%,$(HS_OBJS)) > /dev/null 2>&1
411 # Remove local symbols from library objects if requested.
414 ifeq "$(StripLibraries)" "YES"
415 ifeq "$(SplitObjs)" "YES"
416 SRC_HC_POST_OPTS += \
417 for i in $(basename $@)/*; do \
418 ld -r -x -o $$i.tmp $$i; \
422 SRC_HC_POST_OPTS += \
423 ld -r -x -o $@.tmp $@; $(MV) $@.tmp $@
427 $(LIBRARY) :: $(STUBOBJS) $(LIBOBJS)
431 #----------------------------------------
432 # Building Win32 DLLs
436 ifeq "$(DLL_NAME)" ""
437 DLL_NAME = $(patsubst %.a, %.dll, $(subst lib,,$(LIBRARY)))
440 DLL_NAME := $(DLL_PEN)/$(DLL_NAME)
444 ifeq "$(DLL_IMPLIB_NAME)" ""
445 DLL_IMPLIB_NAME = $(patsubst %.a, %_imp.a, $(LIBRARY))
448 $(DLL_NAME) :: $(LIBRARY)
449 $(BLD_DLL) --output-lib $(DLL_IMPLIB_NAME) -o $(DLL_NAME) $(LIBRARY) $(BLD_DLL_OPTS)
453 # Version information is baked into a DLL by having the DLL include DllVersionInfo.o.
454 # The version info contains two user tweakables: DLL_VERSION and DLL_VERSION_NAME.
455 # (both are given sensible defaults though.)
457 # Note: this will not work as expected with Cygwin B20.1; you need a more recent
458 # snapshot of binutils (to pick up windres bugfixes.)
461 DLL_VERSION=$(ProjectVersion)
464 ifndef DLL_VERSION_NAME
465 DLL_VERSION_NAME="http://www.haskell.org/ghc"
468 ifndef DLL_DESCRIPTION
469 DLL_DESCRIPTION="A GHC-compiled DLL"
473 EXE_VERSION=$(ProjectVersion)
476 ifndef EXE_VERSION_NAME
477 EXE_VERSION_NAME="http://www.haskell.org/ghc"
480 ifndef EXE_DESCRIPTION
481 EXE_DESCRIPTION="A GHC-compiled binary"
485 # Little bit of lo-fi mangling to get at the right set of settings depending
486 # on whether we're generating the VERSIONINFO for a DLL or EXE
488 DLL_OR_EXE=$(subst VersionInfo.rc,,$@)
489 VERSION_FT=$(subst Dll, 0x2L, $(subst Exe, 0x1L, $(DLL_OR_EXE)))
490 VERSION_RES_NAME=$(subst Exe,$(EXE_VERSION_NAME), $(subst Dll, $(DLL_VERSION_NAME),$(DLL_OR_EXE)))
491 VERSION_RES=$(subst Exe,$(EXE_VERSION), $(subst Dll, $(DLL_VERSION),$(DLL_OR_EXE)))
492 VERSION_DESC=$(subst Exe,$(EXE_DESCRIPTION), $(subst Dll, $(DLL_DESCRIPTION),$(DLL_OR_EXE)))
494 DllVersionInfo.rc ExeVersionInfo.rc:
495 $(RM) DllVersionInfo.rc
496 echo "1 VERSIONINFO" > $@
497 echo "FILEVERSION 1,0,0,1" >> $@
498 echo "PRODUCTVERSION 1,0,0,1" >> $@
499 echo "FILEFLAGSMASK 0x3fL" >> $@
500 echo "FILEOS 0x4L" >> $@
501 echo "FILETYPE $(VERSION_FT)" >> $@
502 echo "FILESUBTYPE 0x0L" >> $@
504 echo " BLOCK \"StringFileInfo\"" >> $@
506 echo " BLOCK \"040904B0\"" >> $@
508 echo " VALUE \"CompanyName\", \"$(VERSION_RES_NAME)\\0\"" >> $@
509 echo " VALUE \"FileVersion\", \"$(VERSION_RES)\\0\"" >> $@
510 echo " VALUE \"ProductVersion\", \"$(VERSION_RES)\\0\"" >> $@
511 echo " VALUE \"FileDescription\", \"$(VERSION_DESC)\\0\"" >> $@
514 echo " BLOCK \"VarFileInfo\"" >> $@
516 echo " VALUE \"Translation\", 0x0409, 1200" >> $@
520 #----------------------------------------
523 ifneq "$(SCRIPT_PROG)" ""
525 # To produce a fully functional script, you may
526 # have to add some configuration variables at the top of
527 # the script, i.e., the compiler driver needs to know
528 # the path to various utils in the build tree for instance.
530 # To have the build rule for the script automatically do this
531 # for you, set the variable SCRIPT_SUBST_VARS to the list of
532 # variables you need to put in.
535 # SCRIPT_SUBST creates a string of echo commands that
536 # will when evaluated append the (perl)variable name and its value
537 # to the target it is used for, i.e.,
541 # SCRIPT_SUBST_VARS = A B
542 # SCRIPT_SUBST=echo "$""A=\"foo\";" >> $@; echo "$""B=\"bar\";" >> $@
544 # so if you have a rule like the following
549 # @eval $(SCRIPT_SUBST)
551 # `make foo' would create a file `foo' containing the following
558 # ToDo: make this work for shell scripts (drop the initial $).
560 ifeq "$(INTERP)" "$(SHELL)"
561 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$(val)=\\\"$($(val))\\\";\" >> $@;")
563 SCRIPT_SUBST=$(foreach val,$(SCRIPT_SUBST_VARS),"echo \"$$\"\"$(val)=\\\"$($(val))\\\";\" >> $@;")
566 all :: $(SCRIPT_PROG)
569 # #! support under cygwin32 is not quite there yet,
570 # so we rely on the eval `trick' instead. On all other
571 # platforms, we prepend #!$(INTERP) -- SOF 6/97
574 $(SCRIPT_PROG) :: $(SCRIPT_OBJS)
577 ifeq "$(INTERP)" "perl"
578 echo "#! "$(PERL) > $@
581 @echo "#!"$(INTERP) > $@
586 ifneq "$(SCRIPT_PREFIX_FILES)" ""
587 @cat $(SCRIPT_PREFIX_FILES) >> $@
589 @eval $(SCRIPT_SUBST)
590 @cat $(SCRIPT_OBJS) >> $@
595 # links to script programs: we sometimes install a script as
596 # <name>-<version> with a link from <name> to the real script.
598 ifneq "$(SCRIPT_LINK)" ""
599 all :: $(SCRIPT_LINK)
602 # Don't want to overwrite $(SCRIPT_LINK)s that aren't symbolic
603 # links. Testing for symbolic links is problematic to do in
604 # a portable fashion using a /bin/sh test, so we simply rely
607 $(SCRIPT_LINK) : $(SCRIPT_PROG)
608 @if ( $(PERL) -e '$$fn="$(SCRIPT_LINK)"; exit ((! -f $$fn || -l $$fn) ? 0 : 1);' ); then \
609 echo "Creating a symbolic link from $(SCRIPT_PROG) to $(SCRIPT_LINK)"; \
610 $(RM) $(SCRIPT_LINK); \
611 $(LN_S) $(SCRIPT_PROG) $(SCRIPT_LINK); \
613 echo "Creating a symbolic link from $(SCRIPT_PROG) to $(SCRIPT_LINK) failed: \`$(SCRIPT_LINK)' already exists"; \
614 echo "Perhaps remove \`$(SCRIPT_LINK)' manually?"; \
621 ###########################################
623 # Targets: install install-strip uninstall
625 ###########################################
627 # For each of these variables that is defined, you
628 # get one install rule
630 # INSTALL_PROGS executable programs in $(bindir)
631 # INSTALL_SCRIPTS executable scripts in $(bindir)
632 # INSTALL_LIBS platform-dependent libraries in $(libdir) (ranlib'ed)
633 # INSTALL_LIB_SCRIPTS platform-dependent scripts in $(libdir)
634 # INSTALL_LIBEXECS platform-dependent execs in $(libdir)
635 # INSTALL_DATAS platform-independent files in $(datadir)
637 # If the installation directory variable is undefined, the install rule simply
638 # emits a suitable error message.
640 # Remember, too, that the installation directory variables ($(bindir) and
641 # friends can be overridden from their original settings in mk/config.mk.in
644 .PHONY: install installdirs install-strip install-dirs uninstall install-docs show-install
647 @echo "bindir = $(bindir)"
648 @echo "libdir = $(libdir)"
649 @echo "libexecdir = $(libexecdir) # by default, same as libdir"
650 @echo "datadir = $(datadir) # unused for ghc project"
653 # Sometimes useful to separate out the creation of install directories
654 # from the installation itself.
657 @$(INSTALL_DIR) $(bindir)
658 @$(INSTALL_DIR) $(libdir)
659 @$(INSTALL_DIR) $(libexecdir)
660 @$(INSTALL_DIR) $(datadir)
662 # Better do this first...
663 # but we won't for the moment, do it on-demand from
664 # within the various install targets instead.
665 #install:: install-dirs
667 ifneq "$(INSTALL_PROGS)" ""
670 # Here's an interesting one - when using the win32 version
671 # of install (provided via the cygwin toolkit), we have to
672 # supply the .exe suffix, *if* there's no other suffix.
674 # The rule below does this by ferreting out the suffix of each
675 # entry in the INSTALL_PROGS list. If there's no suffix, use
678 # This is bit of a pain to express since GNU make doesn't have
679 # something like $(if ...), but possible using $(subst ..)
680 # [Aside: I added support for $(if ..) to my local copy of GNU
681 # make at one stage, perhaps I should propagate the patch to
682 # the GNU make maintainers..]
684 INSTALL_PROGS := $(foreach p, $(INSTALL_PROGS), $(addsuffix $(subst _,,$(subst __,$(exeext),_$(suffix $(p))_)), $(basename $(p))))
686 install:: $(INSTALL_PROGS)
687 @$(INSTALL_DIR) $(bindir)
688 @for i in $(INSTALL_PROGS); do \
689 echo $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(bindir); \
690 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(bindir) ; \
695 # Just like INSTALL_PROGS, but prefix with install sites bin/lib/data and
696 # install without stripping.
698 ifneq "$(INSTALL_SCRIPTS)" ""
699 install:: $(INSTALL_SCRIPTS)
700 @$(INSTALL_DIR) $(bindir)
701 for i in $(INSTALL_SCRIPTS); do \
702 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(bindir); \
706 ifneq "$(INSTALL_LIB_SCRIPTS)" ""
707 install:: $(INSTALL_LIB_SCRIPTS)
708 @$(INSTALL_DIR) $(libdir)
709 for i in $(INSTALL_LIB_SCRIPTS); do \
710 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(libdir); \
714 ifneq "$(INSTALL_LIBEXEC_SCRIPTS)" ""
715 install:: $(INSTALL_LIBEXEC_SCRIPTS)
716 @$(INSTALL_DIR) $(libexecdir)
717 for i in $(INSTALL_LIBEXEC_SCRIPTS); do \
718 $(INSTALL_SCRIPT) $(INSTALL_OPTS) $$i $(libexecdir); \
722 ifneq "$(INSTALL_LIBS)" ""
723 install:: $(INSTALL_LIBS)
724 @$(INSTALL_DIR) $(libdir)
725 for i in $(INSTALL_LIBS); do \
728 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
729 $(RANLIB) $(libdir)/`basename $$i` ;; \
731 $(INSTALL_DATA) -s $(INSTALL_OPTS) $$i $(libdir) ;; \
733 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(libdir); \
738 ifneq "$(INSTALL_LIBEXECS)" ""
740 # See above comment next to defn of INSTALL_PROGS for what
741 # the purpose of this one-liner is.
743 INSTALL_LIBEXECS := $(foreach p, $(INSTALL_LIBEXECS), $(addsuffix $(subst _,,$(subst __,$(exeext),_$(suffix $(p))_)), $(basename $(p))))
745 install:: $(INSTALL_LIBEXECS)
746 @$(INSTALL_DIR) $(libexecdir)
747 -for i in $(INSTALL_LIBEXECS); do \
748 $(INSTALL_PROGRAM) $(INSTALL_BIN_OPTS) $$i $(libexecdir); \
752 ifneq "$(INSTALL_DATAS)" ""
753 install:: $(INSTALL_DATAS)
754 @$(INSTALL_DIR) $(datadir)
755 for i in $(INSTALL_DATAS); do \
756 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(datadir); \
760 ifneq "$(INSTALL_INCLUDES)" ""
761 install:: $(INSTALL_INCLUDES)
762 @$(INSTALL_DIR) $(includedir)
763 for i in $(INSTALL_INCLUDES); do \
764 $(INSTALL_DATA) $(INSTALL_OPTS) $$i $(includedir); \
772 @for i in $(INSTALL_PROGS) "" ; do \
773 if test "$$i"; then \
774 echo rm -f $(bindir)/`basename $$i`; \
775 rm -f $(bindir)/`basename $$i`; \
778 @for i in $(INSTALL_LIBS) ""; do \
779 if test "$$i"; then \
780 echo rm -f $(libdir)/`basename $$i`; \
781 rm -f $(libdir)/`basename $$i`; \
784 @for i in $(INSTALL_LIBEXECS) ""; do \
785 if test "$$i"; then \
786 echo rm -f $(libexecdir)/`basename $$i`; \
787 rm -f $(libexecdir)/`basename $$i`; \
790 @for i in $(INSTALL_DATAS) ""; do \
791 if test "$$i"; then \
792 echo rm -f $(datadir)/`basename $$i`; \
793 rm -f $(datadir)/`basename $$i`; \
798 # install-strip is from the GNU Makefile standard.
802 @$(MAKE) EXTRA_INSTALL_OPTS='-s' install
806 # install links to script drivers.
808 ifneq "$(SCRIPT_LINK)" ""
810 @if ( $(PERL) -e '$$fn="$(bindir)/$(SCRIPT_LINK)"; exit ((! -f $$fn || -l $$fn) ? 0 : 1);' ); then \
811 echo "Creating a symbol link from $(SCRIPT_PROG) to $(SCRIPT_LINK) in $(bindir)"; \
812 $(RM) $(bindir)/$(SCRIPT_LINK); \
813 $(LN_S) $(SCRIPT_PROG) $(bindir)/$(SCRIPT_LINK); \
815 echo "Creating a symbol link from $(SCRIPT_PROG) to $(SCRIPT_LINK) in $(bindir) failed: \`$(bindir)/$(SCRIPT_LINK)' already exists"; \
816 echo "Perhaps remove \`$(bindir)/$(SCRIPT_LINK)' manually?"; \
822 ###########################################
824 # Targets: dist binary-dist
826 ###########################################
830 # dist-pre is a canned rule the toplevel of your source tree
831 # would use as follows,
835 # it performs two tasks, first creating the distribution directory
836 # tree and it then decorates the new tree with symbolic links pointing
837 # to the symbolic links in the build tree.
839 # The dist-pre relies on (at least) the `find' in GNU findutils
840 # (only tested with version 4.1). All non-GNU `find's I have
841 # laid on my hands locally, has a restrictive treatment of {} in
842 # -exec commands, i.e.,
844 # find . -print echo a{} \;
846 # does not expand the {}, it has to be a separate argument (i.e. `a {}').
847 # GNU find is (IMHO) more sensible here, expanding any {} it comes across
848 # inside an -exec, whether it is a separate arg or part of a word:
852 # GNU find version 4.1
853 # $ find yes -exec echo oh,{}! \;
856 # Of course, the above is not impossible to achieve with other finds,
857 # just that GNU find does the Patently Right Thing here :)
859 # ====> if you're using these dist rules, get hold of GNU findutils.
863 .PHONY: dist dist-pre dist-post
866 # The dist rules leaves out CVS, SRC (from mkshadowdir) and tests
867 # directories when creating shadow source distrib tree
870 -rm -rf $(SRC_DIST_DIR)
871 -rm -f $(SRC_DIST_NAME).tar.gz
872 (cd $(FPTOOLS_TOP_ABS); $(FIND) $(SRC_DIST_DIRS) -type d \( -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -exec $(MKDIRHIER) $(SRC_DIST_DIR)/{} \; \) ; )
873 (cd $(FPTOOLS_TOP_ABS); $(FIND) $(SRC_DIST_DIRS) -name CVS -prune -o -name SRC -prune -o -name tests -prune -o -name "*~" -prune -o -name ".cvsignore" -prune -o -name "\#*" -prune -o -name ".\#*" -prune -o -type l -exec $(LN_S) $(FPTOOLS_TOP_ABS)/{} $(SRC_DIST_DIR)/{} \; )
876 # After having created a shadow distribution tree and copied/linked
877 # all the necessary files to it, `dist-post' makes sure the permissions
878 # are set right and then package up the tree. Empty directories are also removed.
880 # For now, we make the packaging a separate rule, so as to allow
881 # the inspection of the dist tree before eventually packaging it up.
884 @echo Deleting the following empty directories..
885 ( cd $(SRC_DIST_DIR) ; cd .. ; $(FIND) $(SRC_DIST_NAME) -type d -exec sh -c 'test x`ls $$0 | wc -l | sed -e "s/ //g"` = x0' {} \; -print -exec rm -rf {} \; -prune )
886 ( cd $(SRC_DIST_DIR) ; cd .. ; chmod -R a+rw $(SRC_DIST_NAME) )
888 # Automatic generation of a MANIFEST file for a source distribution
889 # tree that is ready to go.
891 cd $(SRC_DIST_DIR); $(FIND) . \( -type l -o -type f \) -exec ls -lLG {} \; | sed -e 's/\.\///' > /tmp/MANIFEST ; mv /tmp/MANIFEST MANIFEST
893 dist-package:: dist-package-tar-gz
895 dist-package-tar-gz ::
896 cd $(SRC_DIST_DIR); cd ..; $(TAR) chzf $(SRC_DIST_NAME).tar.gz $(SRC_DIST_NAME)
899 cd $(SRC_DIST_DIR); cd ..; $(ZIP) $(ZIP_OPTS) -r $(SRC_DIST_NAME).zip $(SRC_DIST_NAME)
901 ###########################################
903 # Targets: check tags show
905 ###########################################
907 #------------------------------------------------------------
913 @for i in $(filter-out %.lhs .hs, $(TESTS)) ''; do \
914 if (test -f "$$i"); then \
915 echo Running: `basename $$i` ; \
916 cd test; `basename $$i` ; \
920 #------------------------------------------------------------
925 tags TAGS:: $(TAGS_HS_SRCS) $(TAGS_C_SRCS)
928 ifneq "$(TAGS_HS_SRCS)" ""
929 $(HSTAGS) $(HSTAGS_OPTS) -- $(TAGS_HS_SRCS)
931 ifneq "$(TAGS_C_SRCS)" ""
932 etags -a $(TAGS_C_SRCS)
934 @( DEREFFED=`ls -l Makefile | sed -e 's/.*-> \(.*\)/\1/g'` && $(RM) `dirname $$DEREFFED`/TAGS && $(CP) TAGS `dirname $$DEREFFED` ) 2>/dev/null || echo TAGS file generated, perhaps copy over to source tree?
936 #------------------------------------------------------------
938 # to see the effective value used for a Makefile variable, do
939 # make show VALUE=MY_VALUE
943 @echo '$(VALUE)=$($(VALUE))'
945 #--------------------------------------------------------------------------
948 .PHONY: dvi ps html pdf rtf
950 ifneq "$(SGML_DOC)" ""
952 # multi-file SGML document: main document name is specified in $(SGML_DOC),
953 # sub-documents (.sgml files) listed in $(SGML_SRCS).
955 ifeq "$(VSGML_SRCS)" ""
956 VSGML_SRCS = $(wildcard *.vsgml)
959 ifeq "$(SGML_SRCS)" ""
960 ifneq "$(VSGML_SRCS)" ""
961 SGML_SRCS = $(patsubst %.vsgml, %.sgml, $(VSGML_SRCS))
963 SGML_SRCS = $(wildcard *.sgml)
967 SGML_TEX = $(addsuffix .tex,$(SGML_DOC))
968 SGML_DVI = $(addsuffix .dvi,$(SGML_DOC))
969 SGML_PS = $(addsuffix .ps,$(SGML_DOC))
970 SGML_PDF = $(addsuffix .pdf,$(SGML_DOC))
971 SGML_RTF = $(addsuffix .rtf,$(SGML_DOC))
972 SGML_HTML = $(addsuffix .html,$(SGML_DOC))
973 # HTML output goes in a subdirectory on its own.
974 SGML_TEXT = $(addsuffix .txt,$(SGML_DOC))
976 $(SGML_DVI) $(SGML_PS) $(SGML_HTML) $(SGML_TEXT) :: $(SGML_SRCS)
985 CLEAN_FILES += $(SGML_TEXT) $(SGML_TEX) $(SGML_PS) $(SGML_DVI) $(SGML_PDF) $(SGML_RTF) $(SGML_HTML) $(SGML_DOC)-*.html
986 # can't use $(SGML_SRCS) here, it was maybe used elsewhere
987 MOSTLY_CLEAN_FILES += $(patsubst %.vsgml, %.sgml, $(VSGML_SRCS))
990 $(RM) -rf $(SGML_DOC)
994 ###########################################
998 ###########################################
1000 # we have to be careful about recursion here; since all the clean
1001 # targets are recursive, we don't want to make eg. distclean depend on
1002 # clean because that would result in far too many recursive calls.
1004 .PHONY: mostlyclean clean distclean maintainer-clean
1007 rm -f $(MOSTLY_CLEAN_FILES)
1009 # extraclean is used for adding actions to the clean target.
1013 rm -f $(MOSTLY_CLEAN_FILES) $(CLEAN_FILES)
1015 distclean:: extraclean
1016 rm -f $(MOSTLY_CLEAN_FILES) $(CLEAN_FILES) $(DIST_CLEAN_FILES)
1018 maintainer-clean:: extraclean
1019 @echo 'This command is intended for maintainers to use; it'
1020 @echo 'deletes files that may need special tools to rebuild.'
1021 rm -f $(MOSTLY_CLEAN_FILES) $(CLEAN_FILES) $(MAINTAINER_CLEAN_FILES)
1023 #################################################################################
1027 #################################################################################
1029 # Here is the ingenious jiggery pokery that allows you to build multiple versions
1030 # of a program in a single build tree.
1032 # The ways setup requires the following variables to be set:
1034 # Expects: $(WAYS) the possible "way" strings to one of
1035 # which $(way) will be set
1038 # So how does $(way) ever get set to anything? Answer, we recursively
1039 # invoke make, setting $(way) on the command line.
1040 # When do we do this recursion? Answer: whenever the programmer
1041 # asks make to make a target that involves a way suffix.
1042 # We must remember *not* to recurse again; but that's easy: we
1043 # just see if $(way) is set:
1047 # If $(WAYS) = p mc, then WAY_TARGETS expands to
1048 # %.p_lhs %.p_hs %.p_o ... %.mc_lhs %.p_hs ...
1049 # and OTHER_WAY_TARGETS to
1050 # %_p.a %_p %_mc.a %_mc
1051 # where the suffixes are from $(SUFFIXES)
1053 # We have to treat libraries and "other" targets differently,
1054 # because their names are of the form
1055 # libHS_p.a and Foo_p
1056 # whereas everything else has names of the form
1059 FPTOOLS_SUFFIXES := o hi hc
1061 WAY_TARGETS = $(foreach way,$(WAYS),$(foreach suffix, $(FPTOOLS_SUFFIXES), %.$(way)_$(suffix)))
1062 LIB_WAY_TARGETS = $(foreach way,$(WAYS),%_$(way).a %_$(way))
1064 # $@ will be something like Foo.p_o
1065 # $(suffix $@) returns .p_o
1066 # $(subst .,.p_o) returns p_o
1067 # $(subst _,.,p_o) returns p.o (clever)
1068 # $(basename p.o) returns p
1071 $(MAKE) way=$(basename $(subst _,.,$(subst .,,$(suffix $@)))) $@
1073 # $(@F) will be something like libHS_p.a, or Foo_p
1074 # $(basename $(@F)) will be libHS_p, or Foo_p
1075 # The sed script extracts the "p" part.
1077 $(LIB_WAY_TARGETS) :
1078 $(MAKE) $(MFLAGS) $@ way=$(subst .,,$(suffix $(subst _,.,$(basename $@))))
1085 # NB: the targets exclude
1087 # since these are way-independent
1088 all docs TAGS clean distclean mostlyclean maintainer-clean install ::
1089 @echo "------------------------------------------------------------------------"
1090 @echo "===fptools== Recursively making \`$@' for ways: $(WAYS) ..."
1091 @echo "PWD = $(shell pwd)"
1092 @echo "------------------------------------------------------------------------"
1093 # Don't rely on -e working, instead we check exit return codes from sub-makes.
1094 @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
1095 for i in $(WAYS) ; do \
1096 echo "------------------------------------------------------------------------"; \
1097 echo "==fptools== $(MAKE) way=$$i $@;"; \
1098 echo "PWD = $(shell pwd)"; \
1099 echo "------------------------------------------------------------------------"; \
1100 $(MAKE) way=$$i --no-print-directory $(MFLAGS) $@ ; \
1101 if [ $$? -eq 0 ] ; then true; else exit $$x_on_err; fi; \
1103 @echo "------------------------------------------------------------------------"
1104 @echo "===fptools== Finished recursively making \`$@' for ways: $(WAYS) ..."
1105 @echo "PWD = $(shell pwd)"
1106 @echo "------------------------------------------------------------------------"