Running a compiled program
runtime control of Haskell programs
running, compiled program
RTS options
To make an executable program, the GHC system compiles your code and
then links it with a non-trivial runtime system (RTS), which handles
storage management, profiling, etc.
You have some control over the behaviour of the RTS, by giving special
command-line arguments to your program.
When your Haskell program starts up, its RTS extracts command-line
arguments bracketed between +RTS+RTS option and
-RTS-RTS option as its own. For example:
% ./a.out -f +RTS -p -S -RTS -h foo bar
The RTS will snaffle -p -S for itself, and the remaining arguments
-f -h foo bar will be handed to your program if/when it calls
System.getArgs.
No -RTS option is required if the runtime-system options extend to
the end of the command line, as in this example:
% hls -ltr /usr/etc +RTS -A5m
If you absolutely positively want all the rest of the options in a
command line to go to the program (and not the RTS), use a
--RTS--RTS option.
As always, for RTS options that take <size>s: If the last
character of size is a K or k, multiply by 1000; if an M or m, by
1,000,000; if a G or G, by 1,000,000,000. (And any wraparound in the
counters is your fault!)
Giving a +RTS -f-f RTS option option will print out the
RTS options actually available in your program (which vary, depending
on how you compiled).
NOTE: to send RTS options to the compiler itself, you need to prefix
the option with -optCrts, eg. to increase the maximum heap size for
a compilation to 128M, you would add -optCrts-M128m to the command
line. The compiler understands some options directly without needing
-optCrts: these are -H and -K.
RTS options to control the garbage-collector
RTS options, garbage-collection
There are several options to give you precise control over garbage
collection. Hopefully, you won't need any of these in normal
operation, but there are several things that can be tweaked for
maximum performance.
-A<size>:
-A<size> RTS option
allocation area, size
[Default: 256k] Set the allocation area size used by the garbage
collector. The allocation area (actually generation 0 step 0) is
fixed and is never resized (unless you use -H, below).
Increasing the allocation area size may or may not give better
performance (a bigger allocation area means worse cache behaviour but
fewer garbage collections and less promotion).
With only 1 generation (-G1) the -A option specifies the
minimum allocation area, since the actual size of the allocation area
will be resized according to the amount of data in the heap (see
-F, below).
-F<factor>:
-F<factor> RTS option
heap size, factor
[Default: 2] This option controls the amount of memory reserved for
the older generations (and in the case of a two space collector the
size of the allocation area) as a factor of the amount of live data.
For example, if there was 2M of live data in the oldest generation
when we last collected it, then by default we'll wait until it grows
to 4M before collecting it again.
The default seems to work well here. If you have plenty of memory, it
is usually better to use -H<size> than to increase
-F<factor>.
The -F setting will be automatically reduced by the garbage
collector when the maximum heap size (the -M<size> setting)
is approaching.
-G<generations>:
-G<generations> RTS option
generations, number of
[Default: 2] Set the number of generations used by the garbage
collector. The default of 2 seems to be good, but the garbage
collector can support any number of generations. Anything larger than
about 4 is probably not a good idea unless your program runs for a
long time, because the oldest generation will never get
collected.
Specifying 1 generation with +RTS -G1 gives you a simple 2-space
collector, as you would expect. In a 2-space collector, the -A
option (see above) specifies the minimum allocation area size,
since the allocation area will grow with the amount of live data in
the heap. In a multi-generational collector the allocation area is a
fixed size (unless you use the -H option, see below).
-H<size>:
-H<size> RTS option
heap size, suggested
[Default: 0] This option provides a "suggested heap size" for the
garbage collector. The garbage collector will use about this much
memory until the program residency grows and the heap size needs to be
expanded to retain reasonable performance.
By default, the heap will start small, and grow and shrink as
necessary. This can be bad for performance, so if you have plenty of
memory it's worthwhile supplying a big -H<size>. For
improving GC performance, using -H<size> is usually a better
bet than -A<size>.
-k<size>:
-k<size> RTS option
stack, minimum size
[Default: 1k] Set the initial stack size for new threads. Thread
stacks (including the main thread's stack) live on the heap, and grow
as required. The default value is good for concurrent applications
with lots of small threads; if your program doesn't fit this model
then increasing this option may help performance.
The main thread is normally started with a slightly larger heap to cut
down on unnecessary stack growth while the program is starting up.
-K<size>:
-K<size> RTS option
stack, maximum size
[Default: 1M] Set the maximum stack size for an individual thread to
<size> bytes. This option is there purely to stop the program
eating up all the available memory in the machine if it gets into an
infinite loop.
-m<n>:
-m<n> RTS option
Minimum % <n> of heap which must be available for allocation.
The default is 3%.
heap, minimum free
-M<size>:
-M<size> RTS option
heap size, maximum
[Default: 64M] Set the maximum heap size to <size> bytes. The heap
normally grows and shrinks according to the memory requirements of the
program. The only reason for having this option is to stop the heap
growing without bound and filling up all the available swap space,
which at the least will result in the program being summarily killed
by the operating system.
-s<file> or -S<file>:
-S<file> RTS option
-s<file> RTS option
Write modest (-s) or verbose (-S) garbage-collector
statistics into file <file>. The default <file> is
<program>@.stat. The <file> stderr is treated
specially, with the output really being sent to stderr.
This option is useful for watching how the storage manager adjusts the
heap size based on the current amount of live data.
RTS options for profiling and Concurrent/Parallel Haskell
The RTS options related to profiling are described in ; and those for concurrent/parallel stuff, in
.
RTS options for hackers, debuggers, and over-interested souls
RTS options, hacking/debugging
These RTS options might be used (a) to avoid a GHC bug, (b) to see
``what's really happening'', or (c) because you feel like it. Not
recommended for everyday use!
-B:
-B RTS option
Sound the bell at the start of each (major) garbage collection.
Oddly enough, people really do use this option! Our pal in Durham
(England), Paul Callaghan, writes: ``Some people here use it for a
variety of purposes—honestly!—e.g., confirmation that the
code/machine is doing something, infinite loop detection, gauging cost
of recently added code. Certain people can even tell what stage [the
program] is in by the beep pattern. But the major use is for annoying
others in the same office…''
-r<file>:
-r <file> RTS option
ticky ticky profiling
Produce ``ticky-ticky'' statistics at the end of the program run.
The <file> business works just like on the -S RTS option (above).
``Ticky-ticky'' statistics are counts of various program actions
(updates, enters, etc.) The program must have been compiled using
-ticky-ticky option (a.k.a. ``ticky-ticky profiling''),
and, for it to be really useful, linked with suitable system
libraries. Not a trivial undertaking: consult the installation guide
on how to set things up for easy ``ticky-ticky'' profiling. For more
information, see .
-D<num>:
-D RTS option
An RTS debugging flag; varying quantities of output depending on which
bits are set in <num>. Only works if the RTS was compiled with the
DEBUG option.
-Z:
-Z RTS option
Turn off ``update-frame squeezing'' at garbage-collection
time. (There's no particularly good reason to turn it off, except to
ensure the accuracy of certain data collected regarding thunk entry
counts.)
``Hooks'' to change RTS behaviour
hooks, RTS
RTS hooks
RTS behaviour, changing
GHC lets you exercise rudimentary control over the RTS settings for
any given program, by compiling in a ``hook'' that is called by the
run-time system. The RTS contains stub definitions for all these
hooks, but by writing your own version and linking it on the GHC
command line, you can override the defaults.
The function defaultsHookdefaultHook lets you change various
RTS options. The commonest use for this is to give your program a
default heap and/or stack size that is greater than the default. For
example, to set -H8m -K1m:
#include "Rts.h"
#include "RtsFlags.h"
void defaultsHook (void) {
RTSflags.GcFlags.stksSize = 1000002 / sizeof(W_);
RTSflags.GcFlags.heapSize = 8000002 / sizeof(W_);
}
Don't use powers of two for heap/stack sizes: these are more likely to
interact badly with direct-mapped caches. The full set of flags is
defined in ghc/rts/RtsFlags.h the the GHC source tree.
You can also change the messages printed when the runtime system
``blows up,'' e.g., on stack overflow. The hooks for these are as
follows:
void ErrorHdrHook (FILE *):
ErrorHdrHook
What's printed out before the message from error.
void OutOfHeapHook (unsigned long, unsigned long):
OutOfHeapHook
The heap-overflow message.
void StackOverflowHook (long int):
StackOverflowHook
The stack-overflow message.
void MallocFailHook (long int):
MallocFailHook
The message printed if malloc fails.
void PatErrorHdrHook (FILE *):
PatErrorHdrHook
The message printed if a pattern-match fails (the failures
that were not handled by the Haskell programmer).
void PreTraceHook (FILE *):
PreTraceHook
What's printed out before a trace message.
void PostTraceHook (FILE *):
PostTraceHook
What's printed out after a trace message.
For example, here is the ``hooks'' code used by GHC itself:
#include <stdio.h>
#define W_ unsigned long int
#define I_ long int
void
ErrorHdrHook (FILE *where)
{
fprintf(where, "\n"); /* no "Fail: " */
}
void
OutOfHeapHook (W_ request_size, W_ heap_size) /* both sizes in bytes */
{
fprintf(stderr, "GHC's heap exhausted;\nwhile trying to
allocate %lu bytes in a %lu-byte heap;\nuse the `-H<size>'
option to increase the total heap size.\n",
request_size,
heap_size);
}
void
StackOverflowHook (I_ stack_size) /* in bytes */
{
fprintf(stderr, "GHC stack-space overflow: current size
%ld bytes.\nUse the `-K<size>' option to increase it.\n",
stack_size);
}
void
PatErrorHdrHook (FILE *where)
{
fprintf(where, "\n*** Pattern-matching error within GHC!\n\n
This is a compiler bug; please report it to
glasgow-haskell-bugs@haskell.org.\n\nFail: ");
}
void
PreTraceHook (FILE *where)
{
fprintf(where, "\n"); /* not "Trace On" */
}
void
PostTraceHook (FILE *where)
{
fprintf(where, "\n"); /* not "Trace Off" */
}