ship: DDR2

== Ports ===========================================================
data  in:    inAddrRead
data  in:    inAddrWrite
data  in:    inDataWrite

data  out:   out

== TeX ==============================================================

== Fleeterpreter ====================================================
    public void service() { }
== FleetSim ==============================================================

== FPGA ==============================================================

  reg         ddr2_addr_r;
  reg         ddr2_isread;
  reg         ddr2_write_data_push;
  reg         ddr2_read_data_pop;
  reg  [`DATAWIDTH:0]  out_d;

  assign ddr2_addr_r_ = ddr2_addr_r;
  assign ddr2_isread_ = ddr2_isread;
  assign ddr2_addr_ = !ddr2_isread ? inAddrWrite_d[31:0] : inAddrRead_d[31:0];
  assign ddr2_write_data_push_ = ddr2_write_data_push;
  assign ddr2_read_data_pop_ = ddr2_read_data_pop;
  assign ddr2_write_data_ = { inDataWrite_d[31:5], inDataWrite_d[4], inDataWrite_d[35:0] };
//  assign ddr2_write_data_ = inDataWrite_d[(`DATAWIDTH-1):0];
  assign out_d_ = out_d;

  always @(posedge clk) begin

    if (!rst) begin
      `reset
      ddr2_isread <= 0;
      ddr2_addr_r <= 0;
      ddr2_read_data_pop <= 0;

    end else begin
      `flush

      if (!inAddrRead_r_  && inAddrRead_a)  inAddrRead_a  <= 0;
      if (!inDataWrite_r_ && inDataWrite_a) inDataWrite_a <= 0;
      if (!inAddrWrite_r_ && inAddrWrite_a) inAddrWrite_a <= 0;
      if ( out_r          && out_a)         out_r <= 0;

      if (ddr2_addr_r && !ddr2_addr_a) begin
         // busy
      end else if (ddr2_addr_r &&  ddr2_addr_a && !ddr2_isread) begin
          ddr2_addr_r <= 0;
          inAddrWrite_a <= 1;
          inDataWrite_a <= 1;
          out_d <= { 1'b1, 37'b0 };
          out_r <= 1;
      end else if (ddr2_addr_r &&  ddr2_addr_a && ddr2_isread) begin
          ddr2_addr_r <= 0;
          inAddrRead_a <= 1;
          out_d <= { 1'b0, ddr2_read_data[36:0] };
          out_r <= 1;
      end else if (!out_r && !out_a && inAddrWrite_r && !inAddrWrite_a && inDataWrite_r && !inDataWrite_a && !ddr2_addr_r && !ddr2_addr_a) begin
          ddr2_addr_r <= 1;
          ddr2_isread <= 0;
      end else if (!out_r && !out_a && inAddrRead_r && !inAddrRead_a && !ddr2_addr_r && !ddr2_addr_a) begin
          ddr2_addr_r <= 1;
          ddr2_isread <= 1;
      end
    end
  end


== Test ========================================================
#skip

== Constants ========================================================

== Contributors =========================================================
Adam Megacz <megacz@cs.berkeley.edu>