-# binary-dist is an FPtools addition for binary distributions
-#
-
-binary-dist :: project-check
-
-BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS)
-BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion)
-
-#
-# list of toplevel directories to include in binary distrib.
-#
-BIN_DIST_MAIN_DIR=$($(Project)MainDir)
-BIN_DIST_DIRS=$($(Project)BinDistDirs)
-
-binary-dist:: binary-dist-pre
-
-BIN_DIST_TOP= distrib/Makefile-bin.in \
- distrib/configure-bin.ac \
- distrib/INSTALL \
- $(BIN_DIST_MAIN_DIR)/ANNOUNCE \
- $(BIN_DIST_MAIN_DIR)/VERSION \
- $(BIN_DIST_MAIN_DIR)/LICENSE \
- $(BIN_DIST_MAIN_DIR)/README \
- glafp-utils/mkdirhier/mkdirhier \
- install-sh \
- config.guess \
- config.sub \
- aclocal.m4
-
-#
-# binary-dist creates a binary bundle, set BIN_DIST_NAME
-# to package name and do `make binary-dist Project=<project-name>'
-# (normally this just a thing you would do from the toplevel of fptools)
-#
-.PHONY: binary-dist-pre binary-dist binary-pack
-
-BIN_DIST_NAME=$(ProjectNameShort)-$(ProjectVersion)
-BIN_DIST_TMPDIR=$(FPTOOLS_TOP_ABS)
-
-binary-dist-pre::
-ifeq "$(BIN_DIST)" ""
- @echo "WARNING: To run the binary-dist target, you need to set BIN_DIST=1 in your build.mk" && exit 1
-endif
- -rm -rf $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)
- -$(RM) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME).tar.gz
- -echo "BIN_DIST_DIRS = $(BIN_DIST_DIRS)"
- @for i in $(BIN_DIST_DIRS); do \
- if test -d "$$i"; then \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM); \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM); \
- echo $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- $(MKDIRHIER) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- echo $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- $(MAKE) -C $$i $(MFLAGS) $(INSTALL_STAGE) install \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- fi; \
- done
-
-binary-dist::
- @for i in $(BIN_DIST_TOP); do \
- if test -f "$$i"; then \
- echo cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
- cp $$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); \
- fi; \
- done;
- @echo "Configuring the Makefile for this project..."
- touch $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "package = $(ProjectNameShort)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "version = $(ProjectVersion)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_SH_SCRIPTS = $($(Project)BinDistShScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_PRL_SCRIPTS = $($(Project)BinDistPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LIB_PRL_SCRIPTS = $($(Project)BinDistLibPrlScripts)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LIB_SPLICED_FILES = $($(Project)BinDistLibSplicedFiles)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_BINS = $($(Project)BinDistBins)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- echo "PACKAGE_LINKS = $($(Project)BinDistLinks)" >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- cat $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile-bin.in >> $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/Makefile.in
- @echo "Generating a shippable configure script.."
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure-bin.ac $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/configure.ac
- ( cd $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME); autoconf )
- if test -x $(BIN_DIST_MAIN_DIR)/mk/post-install-script ; then \
- cp $(BIN_DIST_MAIN_DIR)/mk/post-install-script \
- $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \
- fi
- if test -x $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script ; then \
- cp $(BIN_DIST_MAIN_DIR)/mk/post-inplace-script \
- $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) ; \
- fi
-#
-# binary dist'ing the documentation.
-# Which documentation to build/install is hardcoded below.
-#
-
-BINDIST_DOC_WAYS = html ps
-# BINDIST_DOC_WAYS =
-
-binary-dist ::
-ifneq "$(DIR_DOCBOOK_XSL)" ""
- @for i in $(BIN_DIST_DIRS); do \
- if test -d "$$i"; then \
- $(MAKE) -C $$i $(MFLAGS) $(BINDIST_DOC_WAYS); \
- echo $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- $(MAKE) -C $$i $(MFLAGS) install-docs XMLDocWays="$(BINDIST_DOC_WAYS)" \
- prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- exec_prefix=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME) \
- bindir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM) \
- libdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- libexecdir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM) \
- datadir=$(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/share; \
- fi \
- done
-endif
-
-# Rename scripts to $i.prl and $i.sh where necessary.
-# ToDo: do this in a cleaner way...
-
-ifneq "$($(Project)BinDistPrlScripts)" ""
-binary-dist::
- @for i in $($(Project)BinDistPrlScripts); do \
- echo "Renaming $$i to $$i.prl"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.prl; \
- done
-endif
-
-ifneq "$($(Project)BinDistLibPrlScripts)" ""
-binary-dist::
- @for i in $($(Project)BinDistLibPrlScripts); do \
- echo "Renaming $$i to $$i.prl"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/lib/$(TARGETPLATFORM)/$$i.prl; \
- done
-endif
-
-ifneq "$($(Project)BinDistShScripts)" ""
-binary-dist::
- @for i in $($(Project)BinDistShScripts); do \
- if test -x $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i ; then \
- echo "Renaming $$i to $$i.sh"; \
- $(MV) $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i $(BIN_DIST_TMPDIR)/$(BIN_DIST_NAME)/bin/$(TARGETPLATFORM)/$$i.sh; \
- fi \
- done
-endif
-
-#
-# Do this separately for now
-#
-binary-pack::
- ( cd $(BIN_DIST_TMPDIR); $(TAR) chzf $(BIN_DIST_NAME).tar.gz $(BIN_DIST_NAME) )
-
-ifneq "$(way)" ""
-.PHONY: package-way-dist
-package-way-dist::
- ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print | xargs tar cvf $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar )
- gzip $(BIN_DIST_TMPDIR)/ghc-$(ProjectVersion)-$(way)-$(TARGETPLATFORM).tar
-endif
-
-ifneq "$(way)" ""
-remove-way-dist::
- ( cd $(BIN_DIST_TMPDIR); $(FIND) $(BIN_DIST_NAME)/ \( -name "*$(_way).a" -o -name "*.$(way_)hi" \) -print -exec $(RM) {} \; )
-endif
-
-binary-dist::
- @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
-