-#elif defined(powerpc_TARGET_ARCH)
-/*
- For PowerPC, the following code is used:
-
- mr r10,r8
- mr r9,r7
- mr r8,r6
- mr r7,r5
- mr r6,r4
- mr r5,r3
- lis r0,0xDEAD ;hi(wptr)
- lis r3,0xDEAF ;hi(hptr)
- ori r0,r0,0xBEEF ; lo(wptr)
- ori r3,r3,0xFACE ; lo(hptr)
- mtctr r0
- bctr
-
- The arguments (passed in registers r3 - r10) are shuffled along by two to
- make room for hptr and a dummy argument. As r9 and r10 are overwritten by
- this code, it only works for up to 6 arguments (when floating point arguments
- are involved, this may be more or less, depending on the exact situation).
-*/
- if ((adjustor = stgMallocBytes(4*13, "createAdjustor")) != NULL) {
- unsigned long *const adj_code = (unsigned long *)adjustor;
-
- // make room for extra arguments
- adj_code[0] = 0x7d0a4378; //mr r10,r8
- adj_code[1] = 0x7ce93b78; //mr r9,r7
- adj_code[2] = 0x7cc83378; //mr r8,r6
- adj_code[3] = 0x7ca72b78; //mr r7,r5
- adj_code[4] = 0x7c862378; //mr r6,r4
- adj_code[5] = 0x7c651b78; //mr r5,r3
-
- adj_code[6] = 0x3c000000; //lis r0,hi(wptr)
- adj_code[6] |= ((unsigned long)wptr) >> 16;
-
- adj_code[7] = 0x3c600000; //lis r3,hi(hptr)
- adj_code[7] |= ((unsigned long)hptr) >> 16;
-
- adj_code[8] = 0x60000000; //ori r0,r0,lo(wptr)
- adj_code[8] |= ((unsigned long)wptr) & 0xFFFF;
-
- adj_code[9] = 0x60630000; //ori r3,r3,lo(hptr)
- adj_code[9] |= ((unsigned long)hptr) & 0xFFFF;
-
- adj_code[10] = 0x7c0903a6; //mtctr r0
- adj_code[11] = 0x4e800420; //bctr
- adj_code[12] = (unsigned long)hptr;
-
- // Flush the Instruction cache:
- // MakeDataExecutable(adjustor,4*13);
- /* This would require us to link with CoreServices.framework */
- { /* this should do the same: */
- int n = 13;
- unsigned long *p = adj_code;
- while(n--)
- {
- __asm__ volatile ("dcbf 0,%0\n\tsync\n\ticbi 0,%0"
- : : "g" (p));
- p++;
- }
- __asm__ volatile ("sync\n\tisync");
- }
- }
-#elif defined(ia64_TARGET_ARCH)
+#elif defined(powerpc_HOST_ARCH) && defined(linux_HOST_OS)
+
+#define OP_LO(op,lo) ((((unsigned)(op)) << 16) | (((unsigned)(lo)) & 0xFFFF))
+#define OP_HI(op,hi) ((((unsigned)(op)) << 16) | (((unsigned)(hi)) >> 16))
+ {
+ /* The PowerPC Linux (32-bit) calling convention is annoyingly complex.
+ We need to calculate all the details of the stack frame layout,
+ taking into account the types of all the arguments, and then
+ generate code on the fly. */
+
+ int src_gpr = 3, dst_gpr = 5;
+ int fpr = 3;
+ int src_offset = 0, dst_offset = 0;
+ int n = strlen(typeString),i;
+ int src_locs[n], dst_locs[n];
+ int frameSize;
+ unsigned *code;
+
+ /* Step 1:
+ Calculate where the arguments should go.
+ src_locs[] will contain the locations of the arguments in the
+ original stack frame passed to the adjustor.
+ dst_locs[] will contain the locations of the arguments after the
+ adjustor runs, on entry to the wrapper proc pointed to by wptr.
+
+ This algorithm is based on the one described on page 3-19 of the
+ System V ABI PowerPC Processor Supplement.
+ */
+ for(i=0;typeString[i];i++)
+ {
+ char t = typeString[i];
+ if((t == 'f' || t == 'd') && fpr <= 8)
+ src_locs[i] = dst_locs[i] = -32-(fpr++);
+ else
+ {
+ if(t == 'l' && src_gpr <= 9)
+ {
+ if((src_gpr & 1) == 0)
+ src_gpr++;
+ src_locs[i] = -src_gpr;
+ src_gpr += 2;
+ }
+ else if(t == 'i' && src_gpr <= 10)
+ {
+ src_locs[i] = -(src_gpr++);
+ }
+ else
+ {
+ if(t == 'l' || t == 'd')
+ {
+ if(src_offset % 8)
+ src_offset += 4;
+ }
+ src_locs[i] = src_offset;
+ src_offset += (t == 'l' || t == 'd') ? 8 : 4;
+ }
+
+ if(t == 'l' && dst_gpr <= 9)
+ {
+ if((dst_gpr & 1) == 0)
+ dst_gpr++;
+ dst_locs[i] = -dst_gpr;
+ dst_gpr += 2;
+ }
+ else if(t == 'i' && dst_gpr <= 10)
+ {
+ dst_locs[i] = -(dst_gpr++);
+ }
+ else
+ {
+ if(t == 'l' || t == 'd')
+ {
+ if(dst_offset % 8)
+ dst_offset += 4;
+ }
+ dst_locs[i] = dst_offset;
+ dst_offset += (t == 'l' || t == 'd') ? 8 : 4;
+ }
+ }
+ }
+
+ frameSize = dst_offset + 8;
+ frameSize = (frameSize+15) & ~0xF;
+
+ /* Step 2:
+ Build the adjustor.
+ */
+ // allocate space for at most 4 insns per parameter
+ // plus 14 more instructions.
+ adjustor = mallocBytesRWX(4 * (4*n + 14));
+ code = (unsigned*)adjustor;
+
+ *code++ = 0x48000008; // b *+8
+ // * Put the hptr in a place where freeHaskellFunctionPtr
+ // can get at it.
+ *code++ = (unsigned) hptr;
+
+ // * save the link register
+ *code++ = 0x7c0802a6; // mflr r0;
+ *code++ = 0x90010004; // stw r0, 4(r1);
+ // * and build a new stack frame
+ *code++ = OP_LO(0x9421, -frameSize); // stwu r1, -frameSize(r1)
+
+ // * now generate instructions to copy arguments
+ // from the old stack frame into the new stack frame.
+ for(i=n-1;i>=0;i--)
+ {
+ if(src_locs[i] < -32)
+ ASSERT(dst_locs[i] == src_locs[i]);
+ else if(src_locs[i] < 0)
+ {
+ // source in GPR.
+ ASSERT(typeString[i] != 'f' && typeString[i] != 'd');
+ if(dst_locs[i] < 0)
+ {
+ ASSERT(dst_locs[i] > -32);
+ // dst is in GPR, too.
+
+ if(typeString[i] == 'l')
+ {
+ // mr dst+1, src+1
+ *code++ = 0x7c000378
+ | ((-dst_locs[i]+1) << 16)
+ | ((-src_locs[i]+1) << 11)
+ | ((-src_locs[i]+1) << 21);
+ }
+ // mr dst, src
+ *code++ = 0x7c000378
+ | ((-dst_locs[i]) << 16)
+ | ((-src_locs[i]) << 11)
+ | ((-src_locs[i]) << 21);
+ }
+ else
+ {
+ if(typeString[i] == 'l')
+ {
+ // stw src+1, dst_offset+4(r1)
+ *code++ = 0x90010000
+ | ((-src_locs[i]+1) << 21)
+ | (dst_locs[i] + 4);
+ }
+
+ // stw src, dst_offset(r1)
+ *code++ = 0x90010000
+ | ((-src_locs[i]) << 21)
+ | (dst_locs[i] + 8);
+ }
+ }
+ else
+ {
+ ASSERT(dst_locs[i] >= 0);
+ ASSERT(typeString[i] != 'f' && typeString[i] != 'd');
+
+ if(typeString[i] == 'l')
+ {
+ // lwz r0, src_offset(r1)
+ *code++ = 0x80010000
+ | (src_locs[i] + frameSize + 8 + 4);
+ // stw r0, dst_offset(r1)
+ *code++ = 0x90010000
+ | (dst_locs[i] + 8 + 4);
+ }
+ // lwz r0, src_offset(r1)
+ *code++ = 0x80010000
+ | (src_locs[i] + frameSize + 8);
+ // stw r0, dst_offset(r1)
+ *code++ = 0x90010000
+ | (dst_locs[i] + 8);
+ }
+ }
+
+ // * hptr will be the new first argument.
+ // lis r3, hi(hptr)
+ *code++ = OP_HI(0x3c60, hptr);
+ // ori r3,r3,lo(hptr)
+ *code++ = OP_LO(0x6063, hptr);
+
+ // * we need to return to a piece of code
+ // which will tear down the stack frame.
+ // lis r11,hi(obscure_ccall_ret_code)
+ *code++ = OP_HI(0x3d60, obscure_ccall_ret_code);
+ // ori r11,r11,lo(obscure_ccall_ret_code)
+ *code++ = OP_LO(0x616b, obscure_ccall_ret_code);
+ // mtlr r11
+ *code++ = 0x7d6803a6;
+
+ // * jump to wptr
+ // lis r11,hi(wptr)
+ *code++ = OP_HI(0x3d60, wptr);
+ // ori r11,r11,lo(wptr)
+ *code++ = OP_LO(0x616b, wptr);
+ // mtctr r11
+ *code++ = 0x7d6903a6;
+ // bctr
+ *code++ = 0x4e800420;
+
+ // Flush the Instruction cache:
+ {
+ unsigned *p = adjustor;
+ while(p < code)
+ {
+ __asm__ volatile ("dcbf 0,%0\n\tsync\n\ticbi 0,%0"
+ : : "r" (p));
+ p++;
+ }
+ __asm__ volatile ("sync\n\tisync");
+ }
+ }
+
+#elif defined(powerpc_HOST_ARCH) || defined(powerpc64_HOST_ARCH)
+
+#define OP_LO(op,lo) ((((unsigned)(op)) << 16) | (((unsigned)(lo)) & 0xFFFF))
+#define OP_HI(op,hi) ((((unsigned)(op)) << 16) | (((unsigned)(hi)) >> 16))
+ {
+ /* The following code applies to all PowerPC and PowerPC64 platforms
+ whose stack layout is based on the AIX ABI.
+
+ Besides (obviously) AIX, this includes
+ Mac OS 9 and BeOS/PPC (may they rest in peace),
+ which use the 32-bit AIX ABI
+ powerpc64-linux,
+ which uses the 64-bit AIX ABI
+ and Darwin (Mac OS X),
+ which uses the same stack layout as AIX,
+ but no function descriptors.
+
+ The actual stack-frame shuffling is implemented out-of-line
+ in the function adjustorCode, in AdjustorAsm.S.
+ Here, we set up an AdjustorStub structure, which
+ is a function descriptor (on platforms that have function
+ descriptors) or a short piece of stub code (on Darwin) to call
+ adjustorCode with a pointer to the AdjustorStub struct loaded
+ into register r2.
+
+ One nice thing about this is that there is _no_ code generated at
+ runtime on the platforms that have function descriptors.
+ */
+ AdjustorStub *adjustorStub;
+ int sz = 0, extra_sz, total_sz;
+
+ // from AdjustorAsm.s
+ // not declared as a function so that AIX-style
+ // fundescs can never get in the way.
+ extern void *adjustorCode;
+
+#ifdef FUNDESCS
+ adjustorStub = stgMallocBytes(sizeof(AdjustorStub), "createAdjustor");
+#else
+ adjustorStub = mallocBytesRWX(sizeof(AdjustorStub));
+#endif
+ adjustor = adjustorStub;
+
+ adjustorStub->code = (void*) &adjustorCode;
+
+#ifdef FUNDESCS
+ // function descriptors are a cool idea.
+ // We don't need to generate any code at runtime.
+ adjustorStub->toc = adjustorStub;
+#else
+
+ // no function descriptors :-(
+ // We need to do things "by hand".
+#if defined(powerpc_HOST_ARCH)
+ // lis r2, hi(adjustorStub)
+ adjustorStub->lis = OP_HI(0x3c40, adjustorStub);
+ // ori r2, r2, lo(adjustorStub)
+ adjustorStub->ori = OP_LO(0x6042, adjustorStub);
+ // lwz r0, code(r2)
+ adjustorStub->lwz = OP_LO(0x8002, (char*)(&adjustorStub->code)
+ - (char*)adjustorStub);
+ // mtctr r0
+ adjustorStub->mtctr = 0x7c0903a6;
+ // bctr
+ adjustorStub->bctr = 0x4e800420;
+#else
+ barf("adjustor creation not supported on this platform");
+#endif
+
+ // Flush the Instruction cache:
+ {
+ int n = sizeof(AdjustorStub)/sizeof(unsigned);
+ unsigned *p = (unsigned*)adjustor;
+ while(n--)
+ {
+ __asm__ volatile ("dcbf 0,%0\n\tsync\n\ticbi 0,%0"
+ : : "r" (p));
+ p++;
+ }
+ __asm__ volatile ("sync\n\tisync");
+ }
+#endif
+
+ // Calculate the size of the stack frame, in words.
+ while(*typeString)
+ {
+ char t = *typeString++;
+
+ switch(t)
+ {
+#if defined(powerpc_HOST_ARCH)
+ // on 32-bit platforms, Double and Int64 occupy two words.
+ case 'd':
+ case 'l':
+ sz += 2;
+ break;
+#endif
+ // everything else is one word.
+ default:
+ sz += 1;
+ }
+ }
+ // The first eight words of the parameter area
+ // are just "backing store" for the parameters passed in
+ // the GPRs. extra_sz is the number of words beyond those first
+ // 8 words.
+ extra_sz = sz - 8;
+ if(extra_sz < 0)
+ extra_sz = 0;
+
+ // Calculate the total size of the stack frame.
+ total_sz = (6 /* linkage area */
+ + 8 /* minimum parameter area */
+ + 2 /* two extra arguments */
+ + extra_sz)*sizeof(StgWord);
+
+ // align to 16 bytes.
+ // AIX only requires 8 bytes, but who cares?
+ total_sz = (total_sz+15) & ~0xF;
+
+ // Fill in the information that adjustorCode in AdjustorAsm.S
+ // will use to create a new stack frame with the additional args.
+ adjustorStub->hptr = hptr;
+ adjustorStub->wptr = wptr;
+ adjustorStub->negative_framesize = -total_sz;
+ adjustorStub->extrawords_plus_one = extra_sz + 1;
+ }
+
+#elif defined(ia64_HOST_ARCH)