ioe_closedHandle, ioe_EOF, ioe_notReadable, ioe_notWritable,
stdin, stdout, stderr,
- IOMode(..), openFile, openBinaryFile, openTempFile, openBinaryTempFile, openFd, fdToHandle,
+ IOMode(..), openFile, openBinaryFile, fdToHandle', fdToHandle,
hFileSize, hSetFileSize, hIsEOF, isEOF, hLookAhead, hSetBuffering, hSetBinaryMode,
hFlush, hDuplicate, hDuplicateTo,
) where
-import System.Directory.Internals
import Control.Monad
import Data.Bits
import Data.Maybe
import GHC.Num ( Integer(..), Num(..) )
import GHC.Show
import GHC.Real ( toInteger )
+#if defined(DEBUG_DUMP)
+import GHC.Pack
+#endif
import GHC.Conc
withHandle_ fun h@(FileHandle _ m) act = withHandle_' fun h m act
withHandle_ fun h@(DuplexHandle _ m _) act = withHandle_' fun h m act
+withHandle_' :: String -> Handle -> MVar Handle__ -> (Handle__ -> IO a) -> IO a
withHandle_' fun h m act =
block $ do
h_ <- takeMVar m
puts ("flushReadBuffer: new file offset = " ++ show off ++ "\n")
# endif
throwErrnoIfMinus1Retry "flushReadBuffer"
- (c_lseek (fromIntegral fd) (fromIntegral off) sEEK_CUR)
+ (c_lseek fd (fromIntegral off) sEEK_CUR)
return buf{ bufWPtr=0, bufRPtr=0 }
flushWriteBuffer :: FD -> Bool -> Buffer -> IO Buffer
if bytes == 0
then return (buf{ bufRPtr=0, bufWPtr=0 })
else do
- res <- writeRawBuffer "flushWriteBuffer" (fromIntegral fd) is_stream b
+ res <- writeRawBuffer "flushWriteBuffer" fd is_stream b
(fromIntegral r) (fromIntegral bytes)
let res' = fromIntegral res
if res' < bytes
-- buffer better be empty:
assert (r == 0 && w == 0) $ do
#ifdef DEBUG_DUMP
- puts ("fillReadBufferLoopNoBlock: bytes = " ++ show bytes ++ "\n")
+ puts ("fillReadBufferLoopNoBlock: bytes = " ++ show size ++ "\n")
#endif
res <- readRawBufferNoBlock "fillReadBuffer" fd is_stream b
0 (fromIntegral size)
-- Low level routines for reading/writing to (raw)buffers:
#ifndef mingw32_HOST_OS
-readRawBuffer :: String -> FD -> Bool -> RawBuffer -> Int -> CInt -> IO CInt
-readRawBuffer loc fd is_stream buf off len =
- throwErrnoIfMinus1RetryMayBlock loc
- (read_rawBuffer fd buf off len)
- (threadWaitRead (fromIntegral fd))
-readRawBufferNoBlock :: String -> FD -> Bool -> RawBuffer -> Int -> CInt -> IO CInt
-readRawBufferNoBlock loc fd is_stream buf off len =
- throwErrnoIfMinus1RetryOnBlock loc
- (read_rawBuffer fd buf off len)
- (return 0)
+{-
+NOTE [nonblock]:
+
+Unix has broken semantics when it comes to non-blocking I/O: you can
+set the O_NONBLOCK flag on an FD, but it applies to the all other FDs
+attached to the same underlying file, pipe or TTY; there's no way to
+have private non-blocking behaviour for an FD. See bug #724.
+
+We fix this by only setting O_NONBLOCK on FDs that we create; FDs that
+come from external sources or are exposed externally are left in
+blocking mode. This solution has some problems though. We can't
+completely simulate a non-blocking read without O_NONBLOCK: several
+cases are wrong here. The cases that are wrong:
+
+ * reading/writing to a blocking FD in non-threaded mode.
+ In threaded mode, we just make a safe call to read().
+ In non-threaded mode we call select() before attempting to read,
+ but that leaves a small race window where the data can be read
+ from the file descriptor before we issue our blocking read().
+ * readRawBufferNoBlock for a blocking FD
+-}
+
+readRawBuffer :: String -> FD -> Bool -> RawBuffer -> Int -> CInt -> IO CInt
+readRawBuffer loc fd is_nonblock buf off len
+ | is_nonblock = unsafe_read
+ | threaded = safe_read
+ | otherwise = do r <- throwErrnoIfMinus1 loc
+ (fdReady (fromIntegral fd) 0 0 False)
+ if r /= 0
+ then unsafe_read
+ else do threadWaitRead (fromIntegral fd); unsafe_read
+ where
+ do_read call = throwErrnoIfMinus1RetryMayBlock loc call
+ (threadWaitRead (fromIntegral fd))
+ unsafe_read = do_read (read_rawBuffer fd buf off len)
+ safe_read = do_read (safe_read_rawBuffer fd buf off len)
readRawBufferPtr :: String -> FD -> Bool -> Ptr CChar -> Int -> CInt -> IO CInt
-readRawBufferPtr loc fd is_stream buf off len =
- throwErrnoIfMinus1RetryMayBlock loc
- (read_off fd buf off len)
- (threadWaitRead (fromIntegral fd))
+readRawBufferPtr loc fd is_nonblock buf off len
+ | is_nonblock = unsafe_read
+ | threaded = safe_read
+ | otherwise = do r <- throwErrnoIfMinus1 loc
+ (fdReady (fromIntegral fd) 0 0 False)
+ if r /= 0
+ then unsafe_read
+ else do threadWaitRead (fromIntegral fd); unsafe_read
+ where
+ do_read call = throwErrnoIfMinus1RetryMayBlock loc call
+ (threadWaitRead (fromIntegral fd))
+ unsafe_read = do_read (read_off fd buf off len)
+ safe_read = do_read (safe_read_off fd buf off len)
+
+readRawBufferNoBlock :: String -> FD -> Bool -> RawBuffer -> Int -> CInt -> IO CInt
+readRawBufferNoBlock loc fd is_nonblock buf off len
+ | is_nonblock = unsafe_read
+ | otherwise = do r <- fdReady (fromIntegral fd) 0 0 False
+ if r /= 0 then safe_read
+ else return 0
+ -- XXX see note [nonblock]
+ where
+ do_read call = throwErrnoIfMinus1RetryOnBlock loc call (return 0)
+ unsafe_read = do_read (read_rawBuffer fd buf off len)
+ safe_read = do_read (safe_read_rawBuffer fd buf off len)
writeRawBuffer :: String -> FD -> Bool -> RawBuffer -> Int -> CInt -> IO CInt
-writeRawBuffer loc fd is_stream buf off len =
- throwErrnoIfMinus1RetryMayBlock loc
- (write_rawBuffer (fromIntegral fd) buf off len)
- (threadWaitWrite (fromIntegral fd))
+writeRawBuffer loc fd is_nonblock buf off len
+ | is_nonblock = unsafe_write
+ | threaded = safe_write
+ | otherwise = do r <- fdReady (fromIntegral fd) 1 0 False
+ if r /= 0
+ then safe_write
+ else do threadWaitWrite (fromIntegral fd); unsafe_write
+ where
+ do_write call = throwErrnoIfMinus1RetryMayBlock loc call
+ (threadWaitWrite (fromIntegral fd))
+ unsafe_write = do_write (write_rawBuffer fd buf off len)
+ safe_write = do_write (safe_write_rawBuffer (fromIntegral fd) buf off len)
writeRawBufferPtr :: String -> FD -> Bool -> Ptr CChar -> Int -> CInt -> IO CInt
-writeRawBufferPtr loc fd is_stream buf off len =
- throwErrnoIfMinus1RetryMayBlock loc
- (write_off (fromIntegral fd) buf off len)
- (threadWaitWrite (fromIntegral fd))
+writeRawBufferPtr loc fd is_nonblock buf off len
+ | is_nonblock = unsafe_write
+ | threaded = safe_write
+ | otherwise = do r <- fdReady (fromIntegral fd) 1 0 False
+ if r /= 0
+ then safe_write
+ else do threadWaitWrite (fromIntegral fd); unsafe_write
+ where
+ do_write call = throwErrnoIfMinus1RetryMayBlock loc call
+ (threadWaitWrite (fromIntegral fd))
+ unsafe_write = do_write (write_off fd buf off len)
+ safe_write = do_write (safe_write_off (fromIntegral fd) buf off len)
foreign import ccall unsafe "__hscore_PrelHandle_read"
- read_rawBuffer :: FD -> RawBuffer -> Int -> CInt -> IO CInt
+ read_rawBuffer :: CInt -> RawBuffer -> Int -> CInt -> IO CInt
foreign import ccall unsafe "__hscore_PrelHandle_read"
- read_off :: FD -> Ptr CChar -> Int -> CInt -> IO CInt
+ read_off :: CInt -> Ptr CChar -> Int -> CInt -> IO CInt
foreign import ccall unsafe "__hscore_PrelHandle_write"
write_rawBuffer :: CInt -> RawBuffer -> Int -> CInt -> IO CInt
foreign import ccall unsafe "__hscore_PrelHandle_write"
write_off :: CInt -> Ptr CChar -> Int -> CInt -> IO CInt
+foreign import ccall safe "fdReady"
+ fdReady :: CInt -> CInt -> CInt -> Bool -> IO CInt
+
#else /* mingw32_HOST_OS.... */
readRawBuffer :: String -> FD -> Bool -> RawBuffer -> Int -> CInt -> IO CInt
-- ToDo: we don't have a non-blocking primitve read on Win32
readRawBufferNoBlock :: String -> FD -> Bool -> RawBuffer -> Int -> CInt -> IO CInt
-readRawBufferNoBlock = readRawBufferNoBlock
+readRawBufferNoBlock = readRawBuffer
-- Async versions of the read/write primitives, for the non-threaded RTS
asyncReadRawBuffer loc fd is_stream buf off len = do
- (l, rc) <- asyncReadBA fd (if is_stream then 1 else 0)
+ (l, rc) <- asyncReadBA (fromIntegral fd) (if is_stream then 1 else 0)
(fromIntegral len) off buf
if l == (-1)
then
else return (fromIntegral l)
asyncReadRawBufferPtr loc fd is_stream buf off len = do
- (l, rc) <- asyncRead fd (if is_stream then 1 else 0)
+ (l, rc) <- asyncRead (fromIntegral fd) (if is_stream then 1 else 0)
(fromIntegral len) (buf `plusPtr` off)
if l == (-1)
then
else return (fromIntegral l)
asyncWriteRawBuffer loc fd is_stream buf off len = do
- (l, rc) <- asyncWriteBA fd (if is_stream then 1 else 0)
+ (l, rc) <- asyncWriteBA (fromIntegral fd) (if is_stream then 1 else 0)
(fromIntegral len) off buf
if l == (-1)
then
else return (fromIntegral l)
asyncWriteRawBufferPtr loc fd is_stream buf off len = do
- (l, rc) <- asyncWrite fd (if is_stream then 1 else 0)
+ (l, rc) <- asyncWrite (fromIntegral fd) (if is_stream then 1 else 0)
(fromIntegral len) (buf `plusPtr` off)
if l == (-1)
then
blockingReadRawBuffer loc fd True buf off len =
throwErrnoIfMinus1Retry loc $
- recv_rawBuffer fd buf off len
+ safe_recv_rawBuffer fd buf off len
blockingReadRawBuffer loc fd False buf off len =
throwErrnoIfMinus1Retry loc $
- read_rawBuffer fd buf off len
+ safe_read_rawBuffer fd buf off len
blockingReadRawBufferPtr loc fd True buf off len =
throwErrnoIfMinus1Retry loc $
- recv_off fd buf off len
+ safe_recv_off fd buf off len
blockingReadRawBufferPtr loc fd False buf off len =
throwErrnoIfMinus1Retry loc $
- read_off fd buf off len
+ safe_read_off fd buf off len
blockingWriteRawBuffer loc fd True buf off len =
throwErrnoIfMinus1Retry loc $
- send_rawBuffer (fromIntegral fd) buf off len
+ safe_send_rawBuffer fd buf off len
blockingWriteRawBuffer loc fd False buf off len =
throwErrnoIfMinus1Retry loc $
- write_rawBuffer (fromIntegral fd) buf off len
+ safe_write_rawBuffer fd buf off len
blockingWriteRawBufferPtr loc fd True buf off len =
throwErrnoIfMinus1Retry loc $
- send_off (fromIntegral fd) buf off len
+ safe_send_off fd buf off len
blockingWriteRawBufferPtr loc fd False buf off len =
throwErrnoIfMinus1Retry loc $
- write_off (fromIntegral fd) buf off len
+ safe_write_off fd buf off len
-- NOTE: "safe" versions of the read/write calls for use by the threaded RTS.
-- These calls may block, but that's ok.
-foreign import ccall safe "__hscore_PrelHandle_read"
- read_rawBuffer :: FD -> RawBuffer -> Int -> CInt -> IO CInt
-
-foreign import ccall safe "__hscore_PrelHandle_read"
- read_off :: FD -> Ptr CChar -> Int -> CInt -> IO CInt
-
-foreign import ccall safe "__hscore_PrelHandle_write"
- write_rawBuffer :: CInt -> RawBuffer -> Int -> CInt -> IO CInt
-
-foreign import ccall safe "__hscore_PrelHandle_write"
- write_off :: CInt -> Ptr CChar -> Int -> CInt -> IO CInt
-
foreign import ccall safe "__hscore_PrelHandle_recv"
- recv_rawBuffer :: FD -> RawBuffer -> Int -> CInt -> IO CInt
+ safe_recv_rawBuffer :: CInt -> RawBuffer -> Int -> CInt -> IO CInt
foreign import ccall safe "__hscore_PrelHandle_recv"
- recv_off :: FD -> Ptr CChar -> Int -> CInt -> IO CInt
+ safe_recv_off :: CInt -> Ptr CChar -> Int -> CInt -> IO CInt
foreign import ccall safe "__hscore_PrelHandle_send"
- send_rawBuffer :: CInt -> RawBuffer -> Int -> CInt -> IO CInt
+ safe_send_rawBuffer :: CInt -> RawBuffer -> Int -> CInt -> IO CInt
foreign import ccall safe "__hscore_PrelHandle_send"
- send_off :: CInt -> Ptr CChar -> Int -> CInt -> IO CInt
+ safe_send_off :: CInt -> Ptr CChar -> Int -> CInt -> IO CInt
-foreign import ccall "rtsSupportsBoundThreads" threaded :: Bool
#endif
+foreign import ccall "rtsSupportsBoundThreads" threaded :: Bool
+
+foreign import ccall safe "__hscore_PrelHandle_read"
+ safe_read_rawBuffer :: FD -> RawBuffer -> Int -> CInt -> IO CInt
+
+foreign import ccall safe "__hscore_PrelHandle_read"
+ safe_read_off :: FD -> Ptr CChar -> Int -> CInt -> IO CInt
+
+foreign import ccall safe "__hscore_PrelHandle_write"
+ safe_write_rawBuffer :: CInt -> RawBuffer -> Int -> CInt -> IO CInt
+
+foreign import ccall safe "__hscore_PrelHandle_write"
+ safe_write_off :: CInt -> Ptr CChar -> Int -> CInt -> IO CInt
+
-- ---------------------------------------------------------------------------
-- Standard Handles
stdin :: Handle
stdin = unsafePerformIO $ do
-- ToDo: acquire lock
- setNonBlockingFD fd_stdin
+ -- We don't set non-blocking mode on standard handles, because it may
+ -- confuse other applications attached to the same TTY/pipe
+ -- see Note [nonblock]
(buf, bmode) <- getBuffer fd_stdin ReadBuffer
mkStdHandle fd_stdin "<stdin>" ReadHandle buf bmode
stdout :: Handle
stdout = unsafePerformIO $ do
-- ToDo: acquire lock
- -- We don't set non-blocking mode on stdout or sterr, because
- -- some shells don't recover properly.
- -- setNonBlockingFD fd_stdout
+ -- We don't set non-blocking mode on standard handles, because it may
+ -- confuse other applications attached to the same TTY/pipe
+ -- see Note [nonblock]
(buf, bmode) <- getBuffer fd_stdout WriteBuffer
mkStdHandle fd_stdout "<stdout>" WriteHandle buf bmode
stderr :: Handle
stderr = unsafePerformIO $ do
-- ToDo: acquire lock
- -- We don't set non-blocking mode on stdout or sterr, because
- -- some shells don't recover properly.
- -- setNonBlockingFD fd_stderr
+ -- We don't set non-blocking mode on standard handles, because it may
+ -- confuse other applications attached to the same TTY/pipe
+ -- see Note [nonblock]
buf <- mkUnBuffer
mkStdHandle fd_stderr "<stderr>" WriteHandle buf NoBuffering
-- directories. However, the man pages I've read say that open()
-- always returns EISDIR if the file is a directory and was opened
-- for writing, so I think we're ok with a single open() here...
- fd <- fromIntegral `liftM`
- throwErrnoIfMinus1Retry "openFile"
+ fd <- throwErrnoIfMinus1Retry "openFile"
(c_open f (fromIntegral oflags) 0o666)
- h <- openFd fd Nothing False filepath mode binary
- `catchException` \e -> do c_close (fromIntegral fd); throw e
- -- NB. don't forget to close the FD if openFd fails, otherwise
+ fd_type <- fdType fd
+
+ h <- fdToHandle' fd (Just fd_type) False filepath mode binary
+ `catchException` \e -> do c_close fd; throw e
+ -- NB. don't forget to close the FD if fdToHandle' fails, otherwise
-- this FD leaks.
- -- ASSERT: if we just created the file, then openFd won't fail
+ -- ASSERT: if we just created the file, then fdToHandle' won't fail
-- (so we don't need to worry about removing the newly created file
-- in the event of an error).
+
#ifndef mingw32_HOST_OS
- if mode == WriteMode
+ -- we want to truncate() if this is an open in WriteMode, but only
+ -- if the target is a RegularFile. ftruncate() fails on special files
+ -- like /dev/null.
+ if mode == WriteMode && fd_type == RegularFile
then throwErrnoIf (/=0) "openFile"
- (c_ftruncate (fromIntegral fd) 0)
+ (c_ftruncate fd 0)
else return 0
#endif
return h
--- | The function creates a temporary file in ReadWrite mode.
--- The created file isn\'t deleted automatically, so you need to delete it manually.
-openTempFile :: FilePath -- ^ Directory in which to create the file
- -> String -- ^ File name template. If the template is \"foo.ext\" then
- -- the create file will be \"fooXXX.ext\" where XXX is some
- -- random number.
- -> IO (FilePath, Handle)
-openTempFile tmp_dir template = openTempFile' "openTempFile" tmp_dir template dEFAULT_OPEN_IN_BINARY_MODE
-
--- | Like 'openTempFile', but opens the file in binary mode. See 'openBinaryFile' for more comments.
-openBinaryTempFile :: FilePath -> String -> IO (FilePath, Handle)
-openBinaryTempFile tmp_dir template = openTempFile' "openBinaryTempFile" tmp_dir template True
-
-openTempFile' :: String -> FilePath -> String -> Bool -> IO (FilePath, Handle)
-openTempFile' loc tmp_dir template binary = do
- pid <- c_getpid
- findTempName pid
- where
- (prefix,suffix) = break (=='.') template
-
- oflags1 = rw_flags .|. o_EXCL
-
- binary_flags
- | binary = o_BINARY
- | otherwise = 0
-
- oflags = oflags1 .|. binary_flags
-
- findTempName x = do
- fd <- withCString filepath $ \ f ->
- c_open f oflags 0o666
- if fd < 0
- then do
- errno <- getErrno
- if errno == eEXIST
- then findTempName (x+1)
- else ioError (errnoToIOError loc errno Nothing (Just tmp_dir))
- else do
- h <- openFd (fromIntegral fd) Nothing False filepath ReadWriteMode True
- `catchException` \e -> do c_close (fromIntegral fd); throw e
- return (filepath, h)
- where
- filename = prefix ++ show x ++ suffix
- filepath = tmp_dir `joinFileName` filename
-
-
std_flags = o_NONBLOCK .|. o_NOCTTY
output_flags = std_flags .|. o_CREAT
read_flags = std_flags .|. o_RDONLY
append_flags = write_flags .|. o_APPEND
-- ---------------------------------------------------------------------------
--- openFd
+-- fdToHandle'
-openFd :: FD -> Maybe FDType -> Bool -> FilePath -> IOMode -> Bool -> IO Handle
-openFd fd mb_fd_type is_socket filepath mode binary = do
+fdToHandle' :: FD -> Maybe FDType -> Bool -> FilePath -> IOMode -> Bool -> IO Handle
+fdToHandle' fd mb_fd_type is_socket filepath mode binary = do
-- turn on non-blocking mode
setNonBlockingFD fd
+#ifdef mingw32_HOST_OS
+ -- On Windows, the is_stream flag indicates that the Handle is a socket
+ let is_stream = is_socket
+#else
+ -- On Unix, the is_stream flag indicates that the FD is non-blocking
+ let is_stream = True
+#endif
+
let (ha_type, write) =
case mode of
ReadMode -> ( ReadHandle, False )
ioException (IOError Nothing InappropriateType "openFile"
"is a directory" Nothing)
- Stream
- | ReadWriteHandle <- ha_type -> mkDuplexHandle fd is_socket filepath binary
- | otherwise -> mkFileHandle fd is_socket filepath ha_type binary
-
-- regular files need to be locked
RegularFile -> do
#ifndef mingw32_HOST_OS
- r <- lockFile (fromIntegral fd) (fromBool write) 1{-exclusive-}
+ r <- lockFile fd (fromBool write) 1{-exclusive-}
when (r == -1) $
ioException (IOError Nothing ResourceBusy "openFile"
"file is locked" Nothing)
#endif
- mkFileHandle fd is_socket filepath ha_type binary
+ mkFileHandle fd is_stream filepath ha_type binary
+ Stream
+ -- only *Streams* can be DuplexHandles. Other read/write
+ -- Handles must share a buffer.
+ | ReadWriteHandle <- ha_type ->
+ mkDuplexHandle fd is_stream filepath binary
+ | otherwise ->
+ mkFileHandle fd is_stream filepath ha_type binary
+
+ RawDevice ->
+ mkFileHandle fd is_stream filepath ha_type binary
fdToHandle :: FD -> IO Handle
fdToHandle fd = do
mode <- fdGetMode fd
let fd_str = "<file descriptor: " ++ show fd ++ ">"
- openFd fd Nothing False{-XXX!-} fd_str mode True{-bin mode-}
+ fdToHandle' fd Nothing False{-XXX!-} fd_str mode True{-bin mode-}
#ifndef mingw32_HOST_OS
(Handle__ { haFD = fd,
haType = ha_type,
haIsBin = dEFAULT_OPEN_IN_BINARY_MODE,
- haIsStream = False,
+ haIsStream = False, -- means FD is blocking on Unix
haBufferMode = bmode,
haBuffer = buf,
haBuffers = spares,
mkFileHandle :: FD -> Bool -> FilePath -> HandleType -> Bool -> IO Handle
mkFileHandle fd is_stream filepath ha_type binary = do
(buf, bmode) <- getBuffer fd (initBufferState ha_type)
+
+#ifdef mingw32_HOST_OS
+ -- On Windows, if this is a read/write handle and we are in text mode,
+ -- turn off buffering. We don't correctly handle the case of switching
+ -- from read mode to write mode on a buffered text-mode handle, see bug
+ -- \#679.
+ bmode <- case ha_type of
+ ReadWriteHandle | not binary -> return NoBuffering
+ _other -> return bmode
+#endif
+
spares <- newIORef BufferListNil
newFileHandle filepath (handleFinalizer filepath)
(Handle__ { haFD = fd,
hClose_handle_ handle_ = do
let fd = haFD handle_
- c_fd = fromIntegral fd
-- close the file descriptor, but not when this is the read
-- side of a duplex handle.
case haOtherSide handle_ of
- Nothing ->
+ Nothing ->
throwErrnoIfMinus1Retry_ "hClose"
#ifdef mingw32_HOST_OS
- (closeFd (haIsStream handle_) c_fd)
+ (closeFd (haIsStream handle_) fd)
#else
- (c_close c_fd)
+ (c_close fd)
#endif
Just _ -> return ()
-- free the spare buffers
writeIORef (haBuffers handle_) BufferListNil
+ writeIORef (haBuffer handle_) noBuffer
#ifndef mingw32_HOST_OS
-- unlock it
- unlockFile c_fd
+ unlockFile fd
#endif
-- we must set the fd to -1, because the finalizer is going
haType = ClosedHandle
})
+{-# NOINLINE noBuffer #-}
+noBuffer = unsafePerformIO $ allocateBuffer 1 ReadBuffer
+
-----------------------------------------------------------------------------
-- Detecting and changing the size of a file
SemiClosedHandle -> ioe_closedHandle
_ -> do flushWriteBufferOnly handle_
throwErrnoIf (/=0) "hSetFileSize"
- (c_ftruncate (fromIntegral (haFD handle_)) (fromIntegral size))
+ (c_ftruncate (haFD handle_) (fromIntegral size))
return ()
-- ---------------------------------------------------------------------------
-- fill up the read buffer if necessary
new_buf <- if bufferEmpty buf
- then fillReadBuffer fd is_line (haIsStream handle_) buf
+ then fillReadBuffer fd True (haIsStream handle_) buf
else return buf
writeIORef ref new_buf
-- 'raw' mode under win32 is a bit too specialised (and troublesome
-- for most common uses), so simply disable its use here.
NoBuffering -> setCooked (haFD handle_) False
+#else
+ NoBuffering -> return ()
#endif
_ -> setCooked (haFD handle_) True
let do_seek =
throwErrnoIfMinus1Retry_ "hSeek"
- (c_lseek (fromIntegral (haFD handle_)) (fromIntegral offset) whence)
+ (c_lseek (haFD handle_) (fromIntegral offset) whence)
whence :: CInt
whence = case mode of
-- current buffer size. Just flush instead.
flushBuffer handle_
#endif
- let fd = fromIntegral (haFD handle_)
+ let fd = haFD handle_
posn <- fromIntegral `liftM`
throwErrnoIfMinus1Retry "hGetPosn"
(c_lseek fd 0 sEEK_CUR)
SemiClosedHandle -> ioe_closedHandle
AppendHandle -> return False
_ -> do t <- fdType (haFD handle_)
- return (t == RegularFile
- && (haIsBin handle_
- || tEXT_MODE_SEEK_ALLOWED))
+ return ((t == RegularFile || t == RawDevice)
+ && (haIsBin handle_ || tEXT_MODE_SEEK_ALLOWED))
-- -----------------------------------------------------------------------------
-- Changing echo status (Non-standard GHC extensions)
hSetBinaryMode handle bin =
withAllHandles__ "hSetBinaryMode" handle $ \ handle_ ->
do throwErrnoIfMinus1_ "hSetBinaryMode"
- (setmode (fromIntegral (haFD handle_)) bin)
+ (setmode (haFD handle_) bin)
return handle_{haIsBin=bin}
foreign import ccall unsafe "__hscore_setmode"
hDuplicate :: Handle -> IO Handle
hDuplicate h@(FileHandle path m) = do
- new_h_ <- withHandle' "hDuplicate" h m (dupHandle Nothing)
+ new_h_ <- withHandle' "hDuplicate" h m (dupHandle h Nothing)
newFileHandle path (handleFinalizer path) new_h_
hDuplicate h@(DuplexHandle path r w) = do
- new_w_ <- withHandle' "hDuplicate" h w (dupHandle Nothing)
+ new_w_ <- withHandle' "hDuplicate" h w (dupHandle h Nothing)
new_w <- newMVar new_w_
- new_r_ <- withHandle' "hDuplicate" h r (dupHandle (Just new_w))
+ new_r_ <- withHandle' "hDuplicate" h r (dupHandle h (Just new_w))
new_r <- newMVar new_r_
addMVarFinalizer new_w (handleFinalizer path new_w)
return (DuplexHandle path new_r new_w)
-dupHandle other_side h_ = do
+dupHandle :: Handle -> Maybe (MVar Handle__) -> Handle__
+ -> IO (Handle__, Handle__)
+dupHandle h other_side h_ = do
-- flush the buffer first, so we don't have to copy its contents
flushBuffer h_
- new_fd <- throwErrnoIfMinus1 "dupHandle" $
- c_dup (fromIntegral (haFD h_))
+ new_fd <- case other_side of
+ Nothing -> throwErrnoIfMinus1 "dupHandle" $ c_dup (haFD h_)
+ Just r -> withHandle_' "dupHandle" h r (return . haFD)
dupHandle_ other_side h_ new_fd
-dupHandleTo other_side h_ hto_ = do
+dupHandleTo other_side hto_ h_ = do
flushBuffer h_
- new_fd <- throwErrnoIfMinus1 "dupHandleTo" $
- c_dup2 (fromIntegral (haFD hto_)) (fromIntegral (haFD h_))
- dupHandle_ other_side h_ new_fd
+ -- Windows' dup2 does not return the new descriptor, unlike Unix
+ throwErrnoIfMinus1 "dupHandleTo" $
+ c_dup2 (haFD h_) (haFD hto_)
+ dupHandle_ other_side h_ (haFD hto_)
+dupHandle_ :: Maybe (MVar Handle__) -> Handle__ -> FD
+ -> IO (Handle__, Handle__)
dupHandle_ other_side h_ new_fd = do
buffer <- allocateBuffer dEFAULT_BUFFER_SIZE (initBufferState (haType h_))
ioref <- newIORef buffer
ioref_buffers <- newIORef BufferListNil
- let new_handle_ = h_{ haFD = fromIntegral new_fd,
+ let new_handle_ = h_{ haFD = new_fd,
haBuffer = ioref,
haBuffers = ioref_buffers,
haOtherSide = other_side }
-- ---------------------------------------------------------------------------
-- debugging
-#ifdef DEBUG_DUMP
+#if defined(DEBUG_DUMP)
puts :: String -> IO ()
-puts s = withCString s $ \cstr -> do write_rawBuffer 1 False cstr 0 (fromIntegral (length s))
- return ()
+puts s = do write_rawBuffer 1 (unsafeCoerce# (packCString# s)) 0 (fromIntegral (length s))
+ return ()
#endif
-- -----------------------------------------------------------------------------