-#-----------------------------------------------------------------------------
-# $Id: Makefile,v 1.2 1996/11/21 16:45:54 simonm Exp $
+############################################################################
+#
+# This is the top-level Makefile for GHC
+#
+# Targets:
+#
+# bootstrap (DEFAULT)
+# Builds GHC, then builds the libraries,
+# then uses this GHC ("stage 1") to build itself
+# ("stage 2").
+#
+# bootstrap2
+# Same as bootstrap
+#
+# bootstrap3
+# bootstrap2 + we build GHC one more time ("stage 3")
+#
+# stage1
+# Just build up to stage 1
+#
+# stage2
+# Just build stage 2 (stage 1 must be built)
+#
+# stage3
+# Just build stage 3 (stage 2 must be built)
+#
+# all
+# Same as bootstrap
+#
+# install
+# Install everything, including stage 2 compiler by default
+# (override with stage=3, for example).
+#
+# dist
+# Make a source dist (WARNING: runs 'make distclean' first)
+#
+# binary-dist
+# Builds a binary distribution
+#
+# hc-file-bundle
+# Builds an HC-file bundle, for bootstrapping
+#
+# clean, distclean, maintainer-clean
+# Increasing levels of cleanliness
+#
+############################################################################
-TOP = .
-SUBDIRS = glafp-utils ghc
-include $(TOP)/mk/gen.mk
-include $(TOP)/mk/subdir.mk
+TOP=.
+include $(TOP)/mk/boilerplate.mk
-line = @echo "------------------------------------------------------------------------------"
+#
+# Order is important! It's e.g. necessary to descend into include/
+# before the rest to have a config.h, etc.
+#
+# If we're booting from .hc files, swap the order
+# we descend into subdirs - to boot utils must be before driver.
+#
+.PHONY: stage1 stage2 stage3 bootstrap bootstrap2 bootstrap3
-boot ::
- @echo "Bootstrapping $(PROJECTNAME)..."
- $(line)
- @echo "Booting glafp-utils"
- $(line)
- @$(MAKE) -C glafp-utils boot
+# We can't 'make boot' in libraries until stage1 is built
+ifeq "$(BootingFromHc)" "YES"
+SUBDIRS_BUILD = includes rts compat compiler docs utils driver
+else
+SUBDIRS_BUILD = includes compat utils driver docs compiler rts
+endif
- $(line)
- @echo "Booting ghc"
- $(line)
- @$(MAKE) -C ghc boot
+# Needed for, e.g., clean
+SUBDIRS = $(SUBDIRS_BUILD)
+
+SUBDIRS_INSTALL = includes compat utils driver docs rts libraries compiler
+
+# Sanity check that all the core libraries are in the tree, to catch
+# failure to run darcs-all.
+check-packages :
+ @for d in `cat libraries/core-packages`; do \
+ if test ! -d libraries/$$d; then \
+ echo "Looks like you're missing libraries/$$d,"; \
+ echo "maybe you haven't done './darcs-all get'?"; \
+ exit 1; \
+ fi \
+ done
+ @if test ! -e libraries/base/configure; then \
+ echo "Looks like you're missing base's configure script."; \
+ echo "Did you run 'sh boot' at the top level?"; \
+ exit 1; \
+ fi
+
+stage1 : check-packages
+ $(MAKE) -C utils/mkdependC boot
+ @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ for i in $(SUBDIRS_BUILD); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) boot $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(MFLAGS) boot; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
+ done; \
+ for i in $(SUBDIRS_BUILD); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) all $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(MFLAGS) all; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
+ done
+ $(MAKE) -C libraries boot
+ $(MAKE) -C libraries all
+
+stage2 : check-packages
+ $(MAKE) -C compiler boot stage=2
+ $(MAKE) -C compiler stage=2
+
+stage3 : check-packages
+ $(MAKE) -C compiler boot stage=3
+ $(MAKE) -C compiler stage=3
+
+bootstrap : bootstrap2
+
+bootstrap2 : stage1
+ $(MAKE) stage2
+
+bootstrap3 : bootstrap2
+ $(MAKE) stage3
+
+all :: bootstrap
+
+# -----------------------------------------------------------------------------
+# Installing
+
+# We want to install the stage 2 bootstrapped compiler by default, but we let
+# the user override this by saying 'make install stage=1', for example.
+ifeq "$(stage)" ""
+INSTALL_STAGE = stage=2
+else
+INSTALL_STAGE =
+endif
+
+# Same as default rule, but we pass $(INSTALL_STAGE) to $(MAKE) too
+install :: check-packages
+ $(INSTALL_DIR) $(bindir)
+ @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ for i in $(SUBDIRS_INSTALL); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) $@ $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
+ done
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+# These files need to be in the InstallShield
+# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
+# in the top-level directory of the distribution
+INSTALL_DATAS += ANNOUNCE LICENSE README
+endif
+
+# If installing on Windows with MinGW32, copy the gcc compiler, headers and libs
+# and the perl interpreter and dll into the GHC prefix directory.
+# Gcc and Perl source locations derived from configuration data.
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+ifneq "$(WhatGccIsCalled)" ""
+install ::
+ -mkdir $(prefix)/gcc-lib
+ -mkdir $(prefix)/include
+ -mkdir $(prefix)/include/mingw
+ -cp -rp $(GccDir)../include/* $(prefix)/include/mingw
+ -cp -rp $(GccDir)../lib/gcc-lib/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
+ -cp -rp $(GccDir)../lib/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
+ -cp -rp $(GccDir)../libexec/gcc/mingw32/$(GccVersion)/* $(prefix)/gcc-lib
+ -cp $(GccDir)../lib/*.* $(prefix)/gcc-lib
+ -cp $(GccDir)gcc.exe $(prefix)
+ -cp $(GccDir)as.exe $(prefix)/gcc-lib
+ -cp $(GccDir)ld.exe $(prefix)/gcc-lib
+ -cp $(GccDir)dllwrap.exe $(prefix)/gcc-lib
+ -cp $(GccDir)dlltool.exe $(prefix)/gcc-lib
+ -cp $(GhcDir)../perl.exe $(prefix)
+ -cp $(GhcDir)../perl56.dll $(prefix)
+endif
+endif
+
+install-docs ::
+ @case '${MFLAGS}' in *-[ik]*) x_on_err=0;; *-r*[ik]*) x_on_err=0;; *) x_on_err=1;; esac; \
+ for i in $(SUBDIRS_INSTALL); do \
+ echo "------------------------------------------------------------------------"; \
+ echo "== $(MAKE) $@ $(MFLAGS);"; \
+ echo " in $(shell pwd)/$$i"; \
+ echo "------------------------------------------------------------------------"; \
+ $(MAKE) --no-print-directory -C $$i $(INSTALL_STAGE) $(MFLAGS) $@; \
+ if [ $$? -eq 0 -o $$x_on_err -eq 0 ] ; then true; else exit 1; fi; \
+ done
+
+# -----------------------------------------------------------------------------
+# Making a binary distribution
+#
+# `dist' `binary-dist'
+# Create a distribution tar file for this program. The tar file
+# should be set up so that the file names in the tar file start with
+# a subdirectory name which is the name of the package it is a
+# distribution for. This name can include the version number.
+#
+# For example, the distribution tar file of GCC version 1.40 unpacks
+# into a subdirectory named `gcc-1.40'.
+#
+# The easiest way to do this is to create a subdirectory
+# appropriately named, use ln or cp to install the proper files in
+# it, and then tar that subdirectory.
+#
+# The dist target should explicitly depend on all non-source files
+# that are in the distribution, to make sure they are up to date in
+# the distribution. See Making Releases.
+#
+# binary-dist is a GHC addition for binary distributions
+#
+
+BIN_DIST_TARBALL=ghc-$(ProjectVersion)-$(TARGETPLATFORM).tar.bz2
+
+binary-dist::
+ -rm -rf $(BIN_DIST_DIR)
+ -$(RM) $(BIN_DIST_DIR).tar.gz
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+
+binary-dist::
+ $(MAKE) prefix=$(BIN_DIST_DIR) install
+
+binary-dist::
+ cd $(BIN_DIST_DIR) && ../distrib/prep-bin-dist-mingw
+
+else
+
+BinDistDirs = includes compiler docs rts
+
+BIN_DIST_TOP= distrib/Makefile \
+ distrib/configure-bin.ac \
+ distrib/INSTALL \
+ distrib/README \
+ ANNOUNCE \
+ LICENSE \
+ install-sh \
+ config.guess \
+ config.sub \
+ aclocal.m4
+
+ifeq "$(darwin_TARGET_OS)" "1"
+BIN_DIST_TOP+=mk/fix_install_names.sh
+endif
+
+.PHONY: binary-dist-pre% binary-dist binary-pack
+
+binary-dist:: binary-dist-pre
+
+binary-dist-pre::
+ $(MKDIRHIER) $(BIN_DIST_DIR)/mk
+ echo 'include $$(TOP)/Makefile-vars' > $(BIN_DIST_DIR)/mk/boilerplate.mk
+ echo 'include $$(TOP)/mk/install.mk' > $(BIN_DIST_DIR)/mk/target.mk
+ echo 'include $$(TOP)/mk/recurse.mk' >> $(BIN_DIST_DIR)/mk/target.mk
+ echo '' > $(BIN_DIST_DIR)/mk/compat.mk
+ cp mk/package.mk $(BIN_DIST_DIR)/mk/
+ cp mk/install.mk $(BIN_DIST_DIR)/mk/
+ cp mk/recurse.mk $(BIN_DIST_DIR)/mk/
+ $(MKDIRHIER) $(BIN_DIST_DIR)/lib/$(TARGETPLATFORM)
+ $(MKDIRHIER) $(BIN_DIST_DIR)/share
+
+binary-dist::
+ $(MAKE) -C includes binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C compiler binary-dist DOING_BIN_DIST=YES $(INSTALL_STAGE)
+ # XXX $(MAKE) -C docs binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C rts binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C driver binary-dist DOING_BIN_DIST=YES
+ $(MAKE) -C utils binary-dist DOING_BIN_DIST=YES
+
+VARFILE=$(BIN_DIST_DIR)/Makefile-vars.in
+
+binary-dist::
+ @for i in $(BIN_DIST_TOP); do \
+ if test -f "$$i"; then \
+ echo cp $$i $(BIN_DIST_DIR); \
+ cp $$i $(BIN_DIST_DIR); \
+ fi; \
+ done;
+ @echo "Configuring the Makefile for this project..."
+ echo > $(VARFILE)
+ echo "package = ghc" >> $(VARFILE)
+ echo "version = $(ProjectVersion)" >> $(VARFILE)
+ echo "ProjectVersion = $(ProjectVersion)" >> $(VARFILE)
+ echo "HaveLibGmp = $(HaveLibGmp)" >> $(VARFILE)
+ echo "GhcLibsWithUnix = $(GhcLibsWithUnix)" >> $(VARFILE)
+ echo "GhcWithInterpreter = $(GhcWithInterpreter)" >> $(VARFILE)
+ echo "GhcHasReadline = $(GhcHasReadline)" >> $(VARFILE)
+ echo "BootingFromHc = $(BootingFromHc)" >> $(VARFILE)
+ cat distrib/Makefile-bin-vars.in >> $(VARFILE)
+ @echo "Generating a shippable configure script.."
+ $(MV) $(BIN_DIST_DIR)/configure-bin.ac $(BIN_DIST_DIR)/configure.ac
+ ( cd $(BIN_DIST_DIR); autoreconf )
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+binary-dist::
+ $(MKDIRHIER) $(BIN_DIST_DIR)/icons
+ cp distrib/hsicon.ico $(BIN_DIST_DIR)/icons
+endif
+
+#
+# binary dist'ing the documentation.
+# The default documentation to build/install is given below; overrideable
+# via build.mk or the 'make' command-line.
+#
+# If BINDIST_DOC_WAYS is set, use that
+# If XMLDocWays is set, use that
+# Otherwise, figure out what we can build based on configure results
+
+ifndef BINDIST_DOC_WAYS
+
+ifneq "$(XMLDocWays)" ""
+BINDIST_DOC_WAYS = $(XMLDocWays)
+else
+ifneq "$(XSLTPROC)" ""
+BINDIST_DOC_WAYS = html
+ifneq "$(FOP)" ""
+BINDIST_DOC_WAYS += ps pdf
+else
+ifneq "$(PDFXMLTEX)" ""
+BINDIST_DOC_WAYS += pdf
+endif
+ifneq "$(XMLTEX)" ""
+ifneq "$(DVIPS)" ""
+BINDIST_DOC_WAYS += ps
+endif # DVIPS
+endif # XMLTEX
+endif # FOP
+endif # XSLTPROC
+endif # XMLDocWays
+
+endif # BINDIST_DOC_WAYS
+
+ifneq "$(DIR_DOCBOOK_XSL)" ""
+.PHONY: binary-dist-doc-%
+
+BINARY_DIST_DOC_RULES=$(foreach d,$(BinDistDirs),binary-dist-doc-$d)
+
+binary-dist :: $(BINARY_DIST_DOC_RULES)
+
+$(BINARY_DIST_DOC_RULES): binary-dist-doc-%:
+ $(MAKE) -C $* $(MFLAGS) $(BINDIST_DOC_WAYS)
+ $(MAKE) -C $* $(MFLAGS) install-docs \
+ MAKING_BIN_DIST=1 \
+ XMLDocWays="$(BINDIST_DOC_WAYS)" \
+ prefix=$(BIN_DIST_DIR) \
+ exec_prefix=$(BIN_DIST_DIR) \
+ bindir=$(BIN_DIST_DIR)/bin/$(TARGETPLATFORM) \
+ libdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ libexecdir=$(BIN_DIST_DIR)/lib/$(TARGETPLATFORM) \
+ datadir=$(BIN_DIST_DIR)/share
+endif
+
+.PHONY: binary-dist-doc-%
+
+binary-dist::
+ $(MAKE) -C libraries binary-dist
+
+endif
+
+# Tar up the distribution and build a manifest
+binary-dist :: tar-binary-dist
+
+.PHONY: tar-binary-dist
+tar-binary-dist:
+ ( cd $(BIN_DIST_TOPDIR); tar cf - $(BIN_DIST_NAME) | bzip2 >$(BIN_DIST_TARBALL) )
+ ( cd $(BIN_DIST_TOPDIR); bunzip2 -c $(BIN_DIST_TARBALL) | tar tf - | sed "s/^ghc-$(ProjectVersion)/fptools/" | sort >bin-manifest-$(ProjectVersion) )
+
+PUBLISH_FILES = $(BIN_DIST_TARBALL)
+
+# Upload the distribution and documentation
+ifneq "$(ISCC)" ""
+WINDOWS_INSTALLER_BASE = ghc-$(ProjectVersion)-$(TARGETPLATFORM)
+WINDOWS_INSTALLER = $(WINDOWS_INSTALLER_BASE)$(exeext)
+
+PUBLISH_FILES += $(WINDOWS_INSTALLER)
+
+binary-dist :: generate-windows-installer
+
+.PHONY: generate-windows-installer
+generate-windows-installer ::
+ $(SED) "s/@VERSION@/$(ProjectVersion)/" distrib/ghc.iss | $(ISCC) /O. /F$(WINDOWS_INSTALLER_BASE) -
+endif
+
+# Upload the distribution and documentation
+ifneq "$(PublishLocation)" ""
+binary-dist :: publish-binary-dist
+endif
+
+.PHONY: publish-binary-dist
+publish-binary-dist ::
+ @for f in $(PUBLISH_FILES); do \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $$f $(PublishLocation)/dist"; \
+ if $(PublishCp) $$f $(PublishLocation)/dist; then break; fi; \
+ done \
+ done
+
+ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
+# On Windows, we cannot use absoluate pathnames to rsync, because they look
+# like remote pathnames ("c:/foo/bar"). Also, the docs reside in doc/
+# rather than share/, due to prep-bin-dist-mingw.
+publish-binary-dist ::
+ $(PublishCp) -r $(FPTOOLS_TOP)/$(BIN_DIST_NAME)/doc/html/* $(PublishLocation)/docs
+else
+publish-binary-dist ::
+ $(PublishCp) -r $(BIN_DIST_DIR)/share/html/* $(PublishLocation)/docs
+endif
+
+binary-dist::
+ @echo "Mechanical and super-natty! Inspect the result and *if* happy; freeze, sell and get some sleep!"
+
+# -----------------------------------------------------------------------------
+# Building source distributions
+#
+# Do it like this:
+#
+# $ make
+# $ make dist
+#
+# WARNING: `make dist' calls `make distclean' before tarring up the tree.
+#
+
+.PHONY: dist
+
+#
+# Directory in which we're going to build the src dist
+#
+SRC_DIST_NAME=ghc-$(ProjectVersion)
+SRC_DIST_DIR=$(shell pwd)/$(SRC_DIST_NAME)
+
+#
+# Files to include in source distributions
+#
+SRC_DIST_DIRS += mk docs distrib $(filter-out docs distrib,$(SUBDIRS_INSTALL))
+SRC_DIST_FILES += \
+ configure.ac config.guess config.sub configure \
+ aclocal.m4 README ANNOUNCE HACKING LICENSE Makefile install-sh \
+ ghc.spec.in VERSION
+
+# -----------------------------------------------------------------------------
+# Source distributions
+
+# A source dist is built from a complete build tree, because we
+# require some extra files not contained in a darcs checkout: the
+# output from Happy and Alex, for example.
+#
+# The steps performed by 'make dist' are as follows:
+# - create a complete link-tree of the current build tree in /tmp
+# - run 'make distclean' on that tree
+# - remove a bunch of other files that we know shouldn't be in the dist
+# - tar up first the extralibs package, then the main source package
+
+EXTRA_LIBS=$(patsubst %, $(SRC_DIST_NAME)/libraries/%, $(shell cat libraries/extra-packages))
+
+SRC_DIST_TARBALL = ghc-$(ProjectVersion)-src.tar.bz2
+SRC_DIST_EXTRALIBS_TARBALL = ghc-$(ProjectVersion)-src-extralibs.tar.bz2
+
+VERSION :
+ echo $(ProjectVersion) >VERSION
+
+dist :: VERSION
+
+dist ::
+ $(RM) -rf $(SRC_DIST_DIR)
+ $(RM) $(SRC_DIST_NAME).tar.gz
+ mkdir $(SRC_DIST_DIR)
+ ( cd $(SRC_DIST_DIR) \
+ && for i in $(SRC_DIST_DIRS); do mkdir $$i; (cd $$i && lndir $(FPTOOLS_TOP_ABS)/$$i ); done \
+ && for i in $(SRC_DIST_FILES); do $(LN_S) $(FPTOOLS_TOP_ABS)/$$i .; done \
+ && $(MAKE) distclean \
+ && $(RM) -rf compiler/stage[123] mk/build.mk \
+ && $(FIND) $(SRC_DIST_DIRS) \( -name _darcs -o -name SRC -o -name "autom4te*" -o -name "*~" -o -name ".cvsignore" -o -name "\#*" -o -name ".\#*" -o -name "log" -o -name "*-SAVE" -o -name "*.orig" -o -name "*.rej" \) -print | xargs $(RM) -rf \
+ )
+ tar chf - $(EXTRA_LIBS) | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_EXTRALIBS_TARBALL)
+ $(RM) -rf $(EXTRA_LIBS)
+ tar chf - $(SRC_DIST_NAME) 2>$src_log | bzip2 >$(FPTOOLS_TOP_ABS)/$(SRC_DIST_TARBALL)
+
+# Upload the distribution(s)
+# Retrying is to work around buggy firewalls that corrupt large file transfers
+# over SSH.
+ifneq "$(PublishLocation)" ""
+dist ::
+ @for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist"; \
+ if $(PublishCp) $(SRC_DIST_EXTRALIBS_TARBALL) $(PublishLocation)/dist; then break; fi\
+ done
+ @for i in 0 1 2 3 4 5 6 7 8 9; do \
+ echo "Try $$i: $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist"; \
+ if $(PublishCp) $(SRC_DIST_TARBALL) $(PublishLocation)/dist; then break; fi\
+ done
+endif
+
+# -----------------------------------------------------------------------------
+# HC file bundles
+
+hc-file-bundle :
+ $(RM) -r ghc-$(ProjectVersion)
+ $(LN_S) . ghc-$(ProjectVersion)
+ $(FIND) ghc-$(ProjectVersion)/compiler \
+ ghc-$(ProjectVersion)/utils \
+ ghc-$(ProjectVersion)/compat \
+ ghc-$(ProjectVersion)/libraries -follow \
+ \( -name "*.hc" -o -name "*_hsc.[ch]" -o -name "*_stub.[ch]" \) -print > hc-files-to-go
+ for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/utils ghc-$(ProjectVersion)/libraries -name "*.hsc" -follow -print` ""; do \
+ if test "x$$f" != "x" && test -e `echo "$$f" | sed 's/hsc$$/hs/g'`; then \
+ echo `echo "$$f" | sed 's/hsc$$/hs/g' ` >> hc-files-to-go ; \
+ fi; \
+ done;
+ for f in `$(FIND) ghc-$(ProjectVersion)/compiler ghc-$(ProjectVersion)/rts -name "*.cmm" -follow -print` ""; do \
+ if test "x$$f" != "x"; then \
+ echo `echo "$$f" | sed 's/cmm$$/hc/g' ` >> hc-files-to-go ; \
+ fi; \
+ done;
+ echo ghc-$(ProjectVersion)/libraries/base/GHC/PrimopWrappers.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/compiler/parser/Parser.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/compiler/parser/ParserCore.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/compiler/main/ParsePkgConf.hs >> hc-files-to-go
+ echo ghc-$(ProjectVersion)/libraries/haskell-src/Language/Haskell/Parser.hs >> hc-files-to-go
+ tar czf ghc-$(ProjectVersion)-$(TARGETPLATFORM)-hc.tar.gz `cat hc-files-to-go`
+
+# -----------------------------------------------------------------------------
+# Cleaning
+
+CLEAN_FILES += hc-files-to-go *-hc.tar.gz
+
+DIST_CLEAN_FILES += config.cache config.status mk/config.h mk/stamp-h \
+ ghc.spec docs/users_guide/ug-book.xml
+
+# don't clean config.mk: it's needed when cleaning stuff later on
+LATE_DIST_CLEAN_FILES += mk/config.mk
+
+# VERSION is shipped in a source dist
+MAINTAINER_CLEAN_FILES += VERSION
+
+extraclean::
+ $(RM) -rf autom4te.cache
+
+# -----------------------------------------------------------------------------
+
+# Turn off target.mk's rules for 'all', 'boot' and 'install'.
+NO_BOOT_TARGET=YES
+NO_ALL_TARGET=YES
+NO_INSTALL_TARGET=YES
+
+include $(TOP)/mk/target.mk
+
+# -----------------------------------------------------------------------------
- @echo "Done!"