$(error Cannot make GHC both threaded and profiled)
endif
+
#-----------------------------------------------------------------------------
# Counting source code lines
stage=1
endif
+ifeq "$(HOSTPLATFORM)" "i386-unknown-mingw32"
+ifeq "$(stage)" "1"
+DQ = \"
+else
+DQ = \\\"
+endif
+else
+DQ = \"
+endif
+
.DUMMY: stage_dir
stage_dirs :
$(MKDIRHIER) stage$(stage)
SRC_HC_OPTS += $(patsubst %, -i$(odir)/%, $(ALL_DIRS))
+SRC_HC_OPTS += -Wall -fno-warn-name-shadowing
+# Turn off orphan warnings, but only if the flag exists (i.e. not if we
+# are building stage 1 and using GHC < 6.3).
+ifneq "$(stage) $(ghc_ge_603)" "1 NO"
+SRC_HC_OPTS += -fno-warn-orphans
+endif
+
HS_OBJS = $(patsubst %, $(odir)/%, $(addsuffix .$(way_)o,$(basename $(HS_SRCS))))
C_OBJS = $(patsubst %, $(odir)/%, $(addsuffix .$(way_)o,$(basename $(C_SRCS))))
CONFIG_HS = main/Config.hs
boot :: $(CONFIG_HS)
-$(CONFIG_HS) : $(FPTOOLS_TOP)/mk/config.mk Makefile
+$(CONFIG_HS) : $(FPTOOLS_TOP)/mk/config.mk
@$(RM) -f $(CONFIG_HS)
@echo "Creating $(CONFIG_HS) ... "
+ @echo "{-# OPTIONS -w #-}" >>$(CONFIG_HS)
@echo "module Config where" >>$(CONFIG_HS)
@echo "cProjectName = \"$(ProjectName)\"" >> $(CONFIG_HS)
@echo "cProjectVersion = \"$(ProjectVersion)\"" >> $(CONFIG_HS)
@echo "cBooterVersion = \"$(GhcVersion)\"" >> $(CONFIG_HS)
@echo "cStage = STAGE" >> $(CONFIG_HS)
@echo "cHscIfaceFileVersion = \"$(HscIfaceFileVersion)\"" >> $(CONFIG_HS)
+ @echo "cSplitObjs = \"$(SplitObjs)\"" >> $(CONFIG_HS)
+ @echo "cGhcWithInterpreter = \"$(GhcWithInterpreter)\"" >> $(CONFIG_HS)
@echo "cGhcWithNativeCodeGen = \"$(GhcWithNativeCodeGen)\"" >> $(CONFIG_HS)
+ @echo "cGhcWithSMP = \"$(GhcWithSMP)\"" >> $(CONFIG_HS)
+ @echo "cGhcRTSWays = \"$(GhcRTSWays)\"" >> $(CONFIG_HS)
@echo "cGhcUnregisterised = \"$(GhcUnregisterised)\"" >> $(CONFIG_HS)
@echo "cGhcEnableTablesNextToCode = \"$(GhcEnableTablesNextToCode)\"" >> $(CONFIG_HS)
@echo "cLeadingUnderscore = \"$(LeadingUnderscore)\"" >> $(CONFIG_HS)
@echo "cUSER_WAY_NAMES = \"$(USER_WAY_NAMES)\"" >> $(CONFIG_HS)
@echo "cUSER_WAY_OPTS = \"$(USER_WAY_OPTS)\"" >> $(CONFIG_HS)
@echo "cDEFAULT_TMPDIR = \"$(DEFAULT_TMPDIR)\"" >> $(CONFIG_HS)
+ @echo "cDocDir = \"$(docdir)\"" >> $(CONFIG_HS)
@echo done.
CLEAN_FILES += $(CONFIG_HS)
PLATFORM_H = ghc_boot_platform.h
-stage1/$(PLATFORM_H) : stage_dirs $(FPTOOLS_TOP)/mk/config.mk Makefile
+stage1/$(PLATFORM_H) : stage_dirs $(FPTOOLS_TOP)/mk/config.mk
@echo "Creating $@..."
@$(RM) $@
@echo "#ifndef __PLATFORM_H__" >$@
# For stage2 and above, the BUILD platform is the HOST of stage1, and
# the HOST platform is the TARGET of stage1. The TARGET remains the same
# (stage1 is the cross-compiler, not stage2).
-stage2/$(PLATFORM_H) : stage_dirs $(FPTOOLS_TOP)/mk/config.mk Makefile
+stage2/$(PLATFORM_H) : stage_dirs $(FPTOOLS_TOP)/mk/config.mk
@echo "Creating $@..."
@$(RM) $@
@echo "#ifndef __PLATFORM_H__" >$@
ifeq "$(GhcProfiled)" "YES"
SRC_LD_OPTS += -prof
endif
+ifeq "$(GhcDebugged)" "YES"
+SRC_LD_OPTS += -debug
+endif
ALL_DIRS += ghci
# See comments in $(FPTOOLS_TOP)/utils/ghc-pkg/Makefile for why we use
# a real binary here rather than a shell script.
-INPLACE_HS = $(odir)/ghc-inplace.hs
INPLACE_PROG = $(odir)/ghc-inplace$(exeext)
-EXCLUDED_SRCS += $(INPLACE_HS)
+EXCLUDED_C_SRCS += ghc-inplace.c
-# FPTOOLS_TOP_ABS platform uses backslashes, at least on Cygwin, but that
-# will go wrong when we use it in a Haskell string below.
-TOP_ABS=$(subst \\,/,$(FPTOOLS_TOP_ABS_PLATFORM))
+GHC_PATH=$(FPTOOLS_TOP_ABS)/$(GHC_COMPILER_DIR_REL)/$(GHC_PROG)$(exeext)
-ifeq "$(stage)" "1"
-EnvImport = System.Environment
-GetArgs = getArgs
-else
-EnvImport = GHC.Environment
-GetArgs = getFullArgs
+ifeq "$(HOSTPLATFORM)" "i386-unknown-mingw32"
+INPLACE_EXTRA_FLAGS = -optc-DWINDOWS
endif
-$(INPLACE_HS): Makefile $(FPTOOLS_TOP)/mk/config.mk
- echo "import System.Cmd; import $(EnvImport); import System.Exit" > $@
- echo "main = do args <- $(GetArgs); rawSystem \"$(TOP_ABS)/$(GHC_COMPILER_DIR_REL)/$(GHC_PROG)\" (\"-B$(TOP_ABS)\":\"-fhardwire-lib-paths\":args) >>= exitWith" >> $@
-
-$(INPLACE_PROG): $(INPLACE_HS)
- $(HC) --make $< -o $@
+$(INPLACE_PROG): ghc-inplace.c
+ $(HC) -cpp -optc-DGHC_PATH=$(DQ)$(GHC_PATH)$(DQ) -optc-DTOP_ABS=$(DQ)$(FPTOOLS_TOP_ABS)$(DQ) $(INPLACE_EXTRA_FLAGS) $< -o $@
all :: $(INPLACE_PROG)
-CLEAN_FILES += $(INPLACE_HS) $(INPLACE_PROG)
+CLEAN_FILES += $(INPLACE_PROG)
ifeq "$(stage)" "1"
ghc-inplace : $(INPLACE_PROG)
# typecheck/TcType_HC_OPTS += -auto-all
# typecheck/TcUnify_HC_OPTS += -auto-all
-coreSyn/CorePrep_HC_OPTS += -auto-all
+# coreSyn/CorePrep_HC_OPTS += -auto-all
# parser/Parser_HC_OPTS += -fasm
#-----------------------------------------------------------------------------
HS_IFACES = $(addsuffix .$(way_)hi,$(basename $(HS_OBJS)))
# Haddock can't handle recursive modules currently, so we disable it for now.
-HADDOCK_DOCS = NO
+override HADDOCK_DOCS = NO
# Tell package.mk not to set $(HC)
NO_SET_HC = YES
endif
endif
-$(odir)/main/Config.$(way_)o: SRC_HC_OPTS+=-DSTAGE='"$(stage)"'
+$(odir)/main/Config.$(way_)o: SRC_HC_OPTS+=-DSTAGE=$(DQ)$(stage)$(DQ)
#-----------------------------------------------------------------------------
# binary-dist
# -optdep--exclude-module flag in GHC 6.4. It is not required for any
# other version of GHC, but doesn't do any harm.
+ifeq "$(MakefileDeps)" "YES"
+$(CONFIG_HS) : Makefile
+stage1/$(PLATFORM_H) : Makefile
+stage2/$(PLATFORM_H) : Makefile
+endif
+
-include .depend-$(stage)