from the access control list. Don't leave them there but
deny them access, because 'they' may be a list that
includes you!</para>
+ <para>[March 2003] In fact <command>ssh</command> 3.6.1 now seems to <emphasis>require</emphasis>
+ you to have Unix permissions 600 (read/write for owner only)
+ on the <literal>.ssh/identity</literal> file, else it
+ bombs out. For your local C drive, it seems that <literal>chmod 600 identity</literal> works,
+ but on Windows NT/XP, it doesn't work on a network drive (exact dteails obscure).
+ The solution seems to be to set the CYGWIN environment
+ variable to "<literal>ntsec neta</literal>". The CYGWIN environment variable is discussed
+ in <ulink url="http://cygwin.com/cygwin-ug-net/using-cygwinenv.html">the Cygwin User's Guide</ulink>,
+ and there are more details in <ulink url="http://cygwin.com/faq/faq_4.html#SEC44">the Cygwin FAQ</ulink>.
+ </para>
</listitem>
<listitem>
includes <filename>build.mk</filename> after
<filename>config.mk</filename>.)</para>
+ <para>For your convenience, there's a file called <filename>build.mk.sample</filename>
+ that can serve as a starting point for your <filename>build.mk</filename>.</para>
+
<para>For example, <filename>config.mk.in</filename> contains
the definition:</para>
</para>
-<sect2><Title>Cygwin and MinGW</Title>
+<sect2 id="cygwin-and-mingw"><Title>Cygwin and MinGW</Title>
<para> The Windows situation for building GHC is rather confusing. This section
tries to clarify, and to establish terminology.</para>
<para> Install Cygwin from <ulink url="http://www.cygwin.com/">http://www.cygwin.com/</ulink>.
The installation process is straightforward; we install it in <Filename>c:/cygwin</Filename>.
-Both <command>cvs</command> and <command>ssh</command>
-come with Cygwin, but you'll need them, so make sure you select them when running
-the Cygwin installer.
+During the installation dialogue, make sure that you select:
+<command>cvs</command>, <command>openssh</command>,
+<command>autoconf</command>,
+<command>binutils</command> (includes ld and (I think) ar),
+<command>gcc</command>,
+<command>flex</command>,
+<command>make</command>.
</para>
<para> Now set the following user environment variables:
<itemizedlist>
<listitem>
<para>
+By default, cygwin provides the command shell <filename>ash</filename>
+as <filename>sh.exe</filename>. We have often seen build-system problems that
+turn out to be due to bugs in <filename>ash</filename>
+(to do with quoting
+and length of command lines). On the other hand <filename>bash</filename> seems
+to be rock solid.
+So, in <filename>cygwin/bin</filename>
+remove the supplied <filename>sh.exe</filename> (or rename it as <filename>ash.exe</filename>),
+and copy <filename>bash.exe</filename> to <filename>sh.exe</filename>.
+You'll need to do this in Windows Explorer or the Windows <command>cmd</command> shell, because
+you can't rename a running program!
+</para>
+</listitem>
+
+<listitem>
+<para>
Some script files used in the make system start with "<Command>#!/bin/perl</Command>",
-(and similarly for <Command>bash</Command>). Notice the hardwired path!
+(and similarly for <Command>sh</Command>). Notice the hardwired path!
So you need to ensure that your <Filename>/bin</Filename> directory has the following
binaries in it:
<itemizedlist>
installed as <Filename>c:/cygwin/bin</Filename>. By default Cygwin mounts "<Filename>/</Filename>" as
<Filename>c:/cygwin</Filename>, so if you just take the defaults it'll all work ok.
(You can discover where your Cygwin
-root directory <Filename>/</Filename> is by typing <Command>mount</Command>).
+root directory <Filename>/</Filename> is by typing <Command>mount</Command>.)
Provided <Filename>/bin</Filename> points to the Cygwin <Filename>bin</Filename>
-directory, there's no need to copy anything.
-</para>
-</listitem>
-
-<listitem>
-<para>
-By default, cygwin provides the command shell <filename>ash</filename>
-as <filename>sh.exe</filename>. It has a couple of 'issues' (to do with quoting
-and length of command lines), so
-in your <filename>/bin</filename> directory, make sure that <filename>
-bash.exe</filename> is also provided as <filename>sh.exe</filename>
-(i.e. overwrite the old <filename>sh.exe</filename> with a copy of
-<filename>bash.exe</filename>).
+directory, there's no need to copy anything. If not, copy these binaries from the <filename>cygwin/bin</filename>
+directory (after fixing the <filename>sh.exe</filename> stuff mentioned in the previous bullet).
</para>
</listitem>
</itemizedlist>
<listitem>
<para>GHC uses the <emphasis>mingw</emphasis> C compiler to
-generate code, so you have to install that. Just pick up a mingw bundle at
+generate code, so you have to install that (see <xref linkend="cygwin-and-mingw">).
+Just pick up a mingw bundle at
<ulink url="http://www.mingw.org/">http://www.mingw.org/</ulink>.
We install it in <filename>c:/mingw</filename>.
</para>
<listitem>
+<para>We use <command>emacs</command> a lot, so we install that too.
+When you are in <filename>fptools/ghc/compiler</filename>, you can use
+"<literal>make tags</literal>" to make a TAGS file for emacs. That uses the utility
+<filename>fptools/ghc/utils/hasktags/hasktags</filename>, so you need to make that first.
+The most convenient way to do this is by going <literal>make boot</literal> in <filename>fptools/ghc</filename>.
+The <literal>make tags</literal> command also uses <command>etags</command>, which comes with <command>emacs</command>,
+so you will need to add <filename>emacs/bin</filename> to your <literal>PATH</literal>.
+</para>
+</listitem>
+
+
+<listitem>
<para> Finally, check out a copy of GHC sources from
the CVS repository, following the instructions above (<xref linkend="cvs-access">).
</para>
(see <xref linkend="ghc-mingw">). </para>
<para> Both these options are important! It's possible to get into
-trouble using the wrong C compiler!
-Furthermore, it's very important that you specify a
-full mingw path for <command>gcc</command>, not a cygwin path, because GHC (which
-uses this path to invoke <command>gcc</command>) is a Mingw program and won't
-understand a cygwin path.. For example, if you
+trouble using the wrong C compiler!</para>
+<para>
+Furthermore, it's <emphasis>very important</emphasis> that you specify a
+full MinGW path for <command>gcc</command>, not a Cygwin path, because GHC (which
+uses this path to invoke <command>gcc</command>) is a MinGW program and won't
+understand a Cygwin path. For example, if you
say <literal>--with-gcc=/mingw/bin/gcc</literal>, it'll be interpreted as
<filename>/cygdrive/c/mingw/bin/gcc</filename>, and GHC will fail the first
-time it tries to invoke it. (Worse, the failure does not come with
-a helpful error message, unfortunately.)
+time it tries to invoke it. Worse, the failure comes with
+no error message whatsoever. GHC simply fails silently when first invoked,
+typically leaving you with this:
+<programlisting>
+make[4]: Leaving directory `/cygdrive/e/fptools-stage1/ghc/rts/gmp'
+../../ghc/compiler/ghc-inplace -optc-mno-cygwin -optc-O
+ -optc-Wall -optc-W -optc-Wstrict-prototypes -optc-Wmissing-prototypes
+ -optc-Wmissing-declarations -optc-Winline -optc-Waggregate-return
+ -optc-Wbad-function-cast -optc-Wcast-align -optc-I../includes
+ -optc-I. -optc-Iparallel -optc-DCOMPILING_RTS
+ -optc-fomit-frame-pointer -O2 -static
+ -package-name rts -O -dcore-lint -c Adjustor.c -o Adjustor.o
+make[2]: *** [Adjustor.o] Error 1
+make[1]: *** [all] Error 1
+make[1]: Leaving directory `/cygdrive/e/fptools-stage1/ghc'
+make: *** [all] Error 1
+</programlisting>
+Be warned!
</para>
<para>
</para>
</listitem>
+<listitem><para> You almost certainly want to set
+<programlisting>
+ SplitObjs = NO
+</programlisting>
+in your <filename>build.mk</filename> configuration file (see <xref linkend="sec-build-config">).
+This tells the build system not to split each library into a myriad of little object files, one
+for each function. Doing so reduces binary sizes for statically-linked binaries, but on Windows
+it dramatically increases the time taken to build the libraries in the first place.
+</para>
+</listitem>
+
<listitem><para> Do not attempt to build the documentation.
It needs all kinds of wierd Jade stuff that we haven't worked out for
Win32.</para></listitem>
projects / ghc-hetmet.git / blobdiff