<indexterm><primary>FFI</primary><secondary>GHCi support</secondary></indexterm>
<indexterm><primary>Foreign Function
Interface</primary><secondary>GHCi support</secondary></indexterm>.
- GHCi also includes an interactive debugger (see <xref linkend="ghci-debugger"/>)..</para>
+ GHCi also includes an interactive debugger (see <xref linkend="ghci-debugger"/>).</para>
<sect1 id="ghci-introduction">
<title>Introduction to GHCi</title>
<screen>
$ ghci
- ___ ___ _
- / _ \ /\ /\/ __(_)
- / /_\// /_/ / / | | GHC Interactive, version 6.6, for Haskell 98.
-/ /_\\/ __ / /___| | http://www.haskell.org/ghc/
-\____/\/ /_/\____/|_| Type :? for help.
-
+GHCi, version 6.8.1: http://www.haskell.org/ghc/ :? for help
Loading package base ... linking ... done.
Prelude>
</screen>
<para>There may be a short pause while GHCi loads the prelude and
- standard libraries, after which the prompt is shown. If we follow
- the instructions and type <literal>:?</literal> for help, we
- get:</para>
-
-<screen>
- Commands available from the prompt:
-
- <stmt> evaluate/run <stmt>
- :add <filename> ... add module(s) to the current target set
- :browse [*]<module> display the names defined by <module>
- :cd <dir> change directory to <dir>
- :def <cmd> <expr> define a command :<cmd>
- :edit <file> edit file
- :edit edit last module
- :help, :? display this list of commands
- :info [<name> ...] display information about the given names
- :load <filename> ... load module(s) and their dependents
- :module [+/-] [*]<mod> ... set the context for expression evaluation
- :main [<arguments> ...] run the main function with the given arguments
- :reload reload the current module set
-
- :set <option> ... set options
- :set args <arg> ... set the arguments returned by System.getArgs
- :set prog <progname> set the value returned by System.getProgName
- :set prompt <prompt> set the prompt used in GHCi
- :set editor <cmd> set the command used for :edit
-
- :show modules show the currently loaded modules
- :show bindings show the current bindings made at the prompt
-
- :ctags [<file>] create tags file for Vi (default: "tags")
- :etags [<file>] create tags file for Emacs (default: "TAGS")
- :type <expr> show the type of <expr>
- :kind <type> show the kind of <type>
- :undef <cmd> undefine user-defined command :<cmd>
- :unset <option> ... unset options
- :quit exit GHCi
- :!<command> run the shell command <command>
-
- Options for ':set' and ':unset':
-
- +r revert top-level expressions after each evaluation
- +s print timing/memory stats after each evaluation
- +t print type after evaluation
- -<flags> most GHC command line flags can also be set here
- (eg. -v2, -fglasgow-exts, etc.)
-</screen>
+ standard libraries, after which the prompt is shown. As the banner
+ says, you can type <literal>:?</literal> to see the list of commands
+ available, and a half line description of each of them.</para>
<para>We'll explain most of these commands as we go along. For
Hugs users: many things work the same as in Hugs, so you should be
<screen>
Prelude> :! ghc -c D.hs
Prelude> :load A
-Skipping D ( D.hs, D.o )
-Compiling C ( C.hs, interpreted )
Compiling B ( B.hs, interpreted )
+Compiling C ( C.hs, interpreted )
Compiling A ( A.hs, interpreted )
Ok, modules loaded: A, B, C, D.
*Main>
</screen>
- <para>In the messages from the compiler, we see that it skipped D,
- and used the object file <filename>D.o</filename>. The message
- <literal>Skipping</literal> <replaceable>module</replaceable>
- indicates that compilation for <replaceable>module</replaceable>
- isn't necessary, because the source and everything it depends on
+ <para>In the messages from the compiler, we see that there is no line
+ for <literal>D</literal>. This is because
+ it isn't necessary to compile <literal>D</literal>,
+ because the source and everything it depends on
is unchanged since the last compilation.</para>
<para>At any time you can use the command
A ( A.hs, interpreted )
*Main></screen>
- <para>If we now modify the source of D (or pretend to: using Unix
+ <para>If we now modify the source of D (or pretend to: using the Unix
command <literal>touch</literal> on the source file is handy for
this), the compiler will no longer be able to use the object file,
because it might be out of date:</para>
*Main> :! touch D.hs
*Main> :reload
Compiling D ( D.hs, interpreted )
-Skipping C ( C.hs, interpreted )
-Skipping B ( B.hs, interpreted )
-Skipping A ( A.hs, interpreted )
Ok, modules loaded: A, B, C, D.
*Main>
</screen>
*Main> :! ghc -c C.hs
*Main> :load A
Compiling D ( D.hs, interpreted )
-Compiling C ( C.hs, interpreted )
Compiling B ( B.hs, interpreted )
+Compiling C ( C.hs, interpreted )
Compiling A ( A.hs, interpreted )
Ok, modules loaded: A, B, C, D.
</screen>
<screen>
*Main> :load A
-Skipping D ( D.hs, D.o )
-Skipping C ( C.hs, C.o )
Compiling B ( B.hs, interpreted )
Compiling A ( A.hs, interpreted )
Ok, modules loaded: A, B, C, D.
when working on a large program is to occasionally run
<literal>ghc ––make</literal> to compile the whole project (say
before you go for lunch :-), then continue working in the
- interpreter. As you modify code, the new modules will be
+ interpreter. As you modify code, the changed modules will be
interpreted, but the rest of the project will remain
compiled.</para>
<literal>IO</literal> monad.
<screen>
Prelude> x <- return 42
-42
Prelude> print x
42
Prelude>
<literal>x</literal> in future statements, for example to print
it as we did above.</para>
- <para>GHCi will print the result of a statement if and only if:
+ <para>If <option>-fprint-bind-result</option> is set then
+ GHCi will print the result of a statement if and only if:
<itemizedlist>
<listitem>
<para>The statement is not a binding, or it is a monadic binding
<literal>Show</literal></para>
</listitem>
</itemizedlist>
- The automatic printing of binding results can be supressed with
- <option>:set -fno-print-bind-result</option> (this does not
- supress printing the result of non-binding statements).
- <indexterm><primary><option>-fno-print-bind-result</option></primary></indexterm><indexterm><primary><option>-fprint-bind-result</option></primary></indexterm>.
- You might want to do this to prevent the result of binding
- statements from being fully evaluated by the act of printing
- them, for example.</para>
+ <indexterm><primary><option>-fprint-bind-result</option></primary></indexterm><indexterm><primary><option>-fno-print-bind-result</option></primary></indexterm>.
+ </para>
<para>Of course, you can also bind normal non-IO expressions
using the <literal>let</literal>-statement:</para>
<para>Note that <literal>let</literal> bindings do not automatically
print the value bound, unlike monadic bindings.</para>
+ <para>Hint: you can also use <literal>let</literal>-statements
+ to define functions at the prompt:</para>
+<screen>
+Prelude> let add a b = a + b
+Prelude> add 1 2
+3
+Prelude>
+</screen>
+ <para>However, this quickly gets tedious when defining functions
+ with multiple clauses, or groups of mutually recursive functions,
+ because the complete definition has to be given on a single line,
+ using explicit braces and semicolons instead of layout:</para>
+<screen>
+Prelude> let { f op n [] = n ; f op n (h:t) = h `op` f op n t }
+Prelude> f (+) 0 [1..3]
+6
+Prelude>
+</screen>
+ <para>To alleviate this issue, GHCi commands can be split over
+ multiple lines, by wrapping them in <literal>:{</literal> and
+ <literal>:}</literal> (each on a single line of its own):</para>
+<screen>
+Prelude> :{
+Prelude| let { g op n [] = n
+Prelude| ; g op n (h:t) = h `op` g op n t
+Prelude| }
+Prelude| :}
+Prelude> g (*) 1 [1..3]
+6
+</screen>
+ <para>Such multiline commands can be used with any GHCi command,
+ and the lines between <literal>:{</literal> and
+ <literal>:}</literal> are simply merged into a single line for
+ interpretation. That implies that each such group must form a single
+ valid command when merged, and that no layout rule is used.
+ The main purpose of multiline commands is not to replace module
+ loading but to make definitions in .ghci-files (see <xref
+ linkend="ghci-dot-files"/>) more readable and maintainable.</para>
+
<para>Any exceptions raised during the evaluation or execution
of the statement are caught and printed by the GHCi command line
interface (for more information on exceptions, see the module
<para>
Hint: GHCi will tab-complete names that are in scope; for
example, if you run GHCi and type <literal>J<tab></literal>
- then GHCi will expand it to <literal>Just </literal>.
+ then GHCi will expand it to “<literal>Just </literal>”.
</para>
<sect3>
</sect3>
<sect3>
- <title>The <literal>:main</literal> command</title>
+ <title>The <literal>:main</literal> and <literal>:run</literal> commands</title>
<para>
When a program is compiled and executed, it can use the
["foo","bar"]
</screen>
+ <para>
+ We can also quote arguments which contains characters like
+ spaces, and they are treated like Haskell strings, or we can
+ just use Haskell list syntax:
+ </para>
+
+<screen>
+Prelude> :main foo "bar baz"
+["foo","bar baz"]
+Prelude> :main ["foo", "bar baz"]
+["foo","bar baz"]
+</screen>
+
+ <para>
+ Finally, other functions can be called, either with the
+ <literal>-main-is</literal> flag or the <literal>:run</literal>
+ command:
+ </para>
+
+<screen>
+Prelude> let foo = putStrLn "foo" >> System.Environment.getArgs >>= print
+Prelude> let bar = putStrLn "bar" >> System.Environment.getArgs >>= print
+Prelude> :set -main-is foo
+Prelude> :main foo "bar baz"
+foo
+["foo","bar baz"]
+Prelude> :run bar ["foo", "bar baz"]
+bar
+["foo","bar baz"]
+</screen>
+
</sect3>
</sect2>
</listitem>
</orderedlist>
At the GHCi prompt, or with GHC if the
- <literal>-fextended-default-rules</literal> flag is given,
+ <literal>-XExtendedDefaultRules</literal> flag is given,
the following additional differences apply:
<itemizedlist>
<listitem>
instance that returns <literal>IO a</literal>.
However, it is only able to return
<literal>undefined</literal>
- (the reason for the instance having this type is to not require
- extensions to the class system), so if the type defaults to
+ (the reason for the instance having this type is so that printf
+ doesn't require extensions to the class system), so if the type defaults to
<literal>Integer</literal> then ghci gives an error when running a
printf.
</para>
<para>GHCi contains a simple imperative-style debugger in which you can
stop a running computation in order to examine the values of
variables. The debugger is integrated into GHCi, and is turned on by
- default: no flags are required to enable the debugging facilities. There
- is one major restriction: breakpoints and single-stepping are only
- available in <emphasis>interpreted</emphasis> modules; compiled code is
- invisible to the debugger.</para>
+ default: no flags are required to enable the debugging
+ facilities. There is one major restriction: breakpoints and
+ single-stepping are only available in interpreted modules;
+ compiled code is invisible to the debugger<footnote><para>Note that packages
+ only contain compiled code, so debugging a package requires
+ finding its source and loading that directly.</para></footnote>.</para>
<para>The debugger provides the following:
<itemizedlist>
<listitem>
- <para>The abilty to set a <firstterm>breakpoint</firstterm> on a
+ <para>The ability to set a <firstterm>breakpoint</firstterm> on a
function definition or expression in the program. When the function
is called, or the expression evaluated, GHCi suspends
execution and returns to the prompt, where you can inspect the
</para>
<para>There is currently no support for obtaining a “stack
- trace”, but the tracing and history features provide a useful
- second-best, which will often be enough to establish the context of an
- error.</para>
+ trace”, but the tracing and history features provide a
+ useful second-best, which will often be enough to establish the
+ context of an error. For instance, it is possible to break
+ automatically when an exception is thrown, even if it is thrown
+ from within compiled code (see <xref
+ linkend="ghci-debugger-exceptions" />).</para>
<sect2 id="breakpoints">
<title>Breakpoints and inspecting variables</title>
<literal>left</literal>:</para>
<screen>
+[qsort.hs:2:15-46] *Main> :set -fprint-evld-with-show
[qsort.hs:2:15-46] *Main> :print left
left = (_t1::[a])
</screen>
underscore, in this case
<literal>_t1</literal>.</para>
+ <para>The flag <literal>-fprint-evld-with-show</literal> instructs
+ <literal>:print</literal> to reuse
+ available <literal>Show</literal> instances when possible. This happens
+ only when the contents of the variable being inspected
+ are completely evaluated.</para>
+
+
<para>If we aren't concerned about preserving the evaluatedness of a
variable, we can use <literal>:force</literal> instead of
<literal>:print</literal>. The <literal>:force</literal> command
<para>The execution continued at the point it previously stopped, and has
now stopped at the breakpoint for a second time.</para>
- <sect3 id="setting-breakpoings">
+
+ <sect3 id="setting-breakpoints">
<title>Setting breakpoints</title>
<para>Breakpoints can be set in various ways. Perhaps the easiest way to
<title>Listing and deleting breakpoints</title>
<para>The list of breakpoints currently enabled can be displayed using
- <literal>:show breaks</literal></para>:
+ <literal>:show breaks</literal>:</para>
<screen>
*Main> :show breaks
[0] Main qsort.hs:1:11-12
<para>Single-stepping is a great way to visualise the execution of your
program, and it is also a useful tool for identifying the source of a
- bug. The concept is simple: single-stepping enables all the
- breakpoints in the program and executes until the next breakpoint is
- reached, at which point you can single-step again, or continue
- normally. For example:</para>
+ bug. GHCi offers two variants of stepping. Use
+ <literal>:step</literal> to enable all the
+ breakpoints in the program, and execute until the next breakpoint is
+ reached. Use <literal>:steplocal</literal> to limit the set
+ of enabled breakpoints to those in the current top level function.
+ Similarly, use <literal>:stepmodule</literal> to single step only on
+ breakpoints contained in the current module.
+ For example:</para>
<screen>
*Main> :step main
</screen>
<para>The command <literal>:step
- <replaceable>expr</replaceable></literal> begins the evaluation of
+ <replaceable>expr</replaceable></literal> begins the evaluation of
<replaceable>expr</replaceable> in single-stepping mode. If
- <replaceable>expr</replaceable> is ommitted, then it single-steps from
- the current breakpoint.</para>
+ <replaceable>expr</replaceable> is omitted, then it single-steps from
+ the current breakpoint. <literal>:stepover</literal>
+ works similarly.</para>
<para>The <literal>:list</literal> command is particularly useful when
single-stepping, to see where you currently are:</para>
<literal>:trace</literal> and <literal>:history</literal> to establish
the context. However, <literal>head</literal> is in a library and
we can't set a breakpoint on it directly. For this reason, GHCi
- provides the flag <literal>-fbreak-on-exception</literal> which causes
- the evaluator to stop when an exception is thrown, just as it does when
- a breakpoint is hit. This is only really useful in conjunction with
+ provides the flags <literal>-fbreak-on-exception</literal> which causes
+ the evaluator to stop when an exception is thrown, and <literal>
+ -fbreak-on-error</literal>, which works similarly but stops only on
+ uncaught exceptions. When stopping at an exception, GHCi will act
+ just as it does when a breakpoint is hit, with the deviation that it
+ will not show you any source code location. Due to this, these
+ commands are only really useful in conjunction with
<literal>:trace</literal>, in order to log the steps leading up to the
exception. For example:</para>
<programlisting>
import Prelude hiding (map)
-map :: (a->b) -> a -> b
+map :: (a->b) -> [a] -> [b]
map f [] = []
map f (x:xs) = f x : map f xs
</programlisting>
</listitem>
<listitem><para>
Implicit parameters (see <xref linkend="implicit-parameters"/>) are only available
- at the scope of a breakpoint if there is a explicit type signature.
+ at the scope of a breakpoint if there is an explicit type signature.
</para>
</listitem>
</itemizedlist>
<para>Most of the command-line options accepted by GHC (see <xref
linkend="using-ghc"/>) also make sense in interactive mode. The ones
- that don't make sense are mostly obvious; for example, GHCi
- doesn't generate interface files, so options related to interface
- file generation won't have any effect.</para>
+ that don't make sense are mostly obvious.</para>
<sect2>
<title>Packages</title>
<screen>
$ ghci -package readline
- ___ ___ _
- / _ \ /\ /\/ __(_)
- / /_\// /_/ / / | | GHC Interactive, version 6.6, for Haskell 98.
-/ /_\\/ __ / /___| | http://www.haskell.org/ghc/
-\____/\/ /_/\____/|_| Type :? for help.
-
+GHCi, version 6.8.1: http://www.haskell.org/ghc/ :? for help
Loading package base ... linking ... done.
Loading package readline-1.0 ... linking ... done.
Prelude>
<varlistentry>
<term>
- <literal>:browse</literal> <optional><literal>*</literal></optional><replaceable>module</replaceable> ...
+ <literal>:browse</literal><optional><literal>!</literal></optional> <optional><optional><literal>*</literal></optional><replaceable>module</replaceable></optional> ...
<indexterm><primary><literal>:browse</literal></primary></indexterm>
</term>
<listitem>
<para>Displays the identifiers defined by the module
<replaceable>module</replaceable>, which must be either
- loaded into GHCi or be a member of a package. If the
- <literal>*</literal> symbol is placed before the module
- name, then <emphasis>all</emphasis> the identifiers defined
- in <replaceable>module</replaceable> are shown; otherwise
- the list is limited to the exports of
+ loaded into GHCi or be a member of a package. If
+ <replaceable>module</replaceable> is omitted, the most
+ recently-loaded module is used.</para>
+
+ <para>If the <literal>*</literal> symbol is placed before
+ the module name, then <emphasis>all</emphasis> the
+ identifiers in scope in <replaceable>module</replaceable> are
+ shown; otherwise the list is limited to the exports of
<replaceable>module</replaceable>. The
<literal>*</literal>-form is only available for modules
which are interpreted; for compiled modules (including
modules from packages) only the non-<literal>*</literal>
- form of <literal>:browse</literal> is available.</para>
+ form of <literal>:browse</literal> is available.
+ If the <literal>!</literal> symbol is appended to the
+ command, data constructors and class methods will be
+ listed individually, otherwise, they will only be listed
+ in the context of their data type or class declaration.
+ The <literal>!</literal>-form also annotates the listing
+ with comments giving possible imports for each group of
+ entries.</para>
+<screen>
+Prelude> :browse! Data.Maybe
+-- not currently imported
+Data.Maybe.catMaybes :: [Maybe a] -> [a]
+Data.Maybe.fromJust :: Maybe a -> a
+Data.Maybe.fromMaybe :: a -> Maybe a -> a
+Data.Maybe.isJust :: Maybe a -> Bool
+Data.Maybe.isNothing :: Maybe a -> Bool
+Data.Maybe.listToMaybe :: [a] -> Maybe a
+Data.Maybe.mapMaybe :: (a -> Maybe b) -> [a] -> [b]
+Data.Maybe.maybeToList :: Maybe a -> [a]
+-- imported via Prelude
+Just :: a -> Maybe a
+data Maybe a = Nothing | Just a
+Nothing :: Maybe a
+maybe :: b -> (a -> b) -> Maybe a -> b
+</screen>
+ <para>
+ This output shows that, in the context of the current session, in the scope
+ of <literal>Prelude</literal>, the first group of items from
+ <literal>Data.Maybe</literal> have not been imported (but are available in
+ fully qualified form in the GHCi session - see <xref
+ linkend="ghci-scope"/>), whereas the second group of items have been
+ imported via <literal>Prelude</literal> and are therefore available either
+ unqualified, or with a <literal>Prelude.</literal> qualifier.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
<term>
- <literal>:continue</literal>
- <indexterm><primary><literal>:continue</literal></primary></indexterm>
- </term>
- <listitem><para>Continue the current evaluation, when stopped at a
- breakpoint.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>
<literal>:cmd</literal> <replaceable>expr</replaceable>
<indexterm><primary><literal>:cmd</literal></primary></indexterm>
</term>
<varlistentry>
<term>
+ <literal>:continue</literal>
+ <indexterm><primary><literal>:continue</literal></primary></indexterm>
+ </term>
+ <listitem><para>Continue the current evaluation, when stopped at a
+ breakpoint.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>
<literal>:ctags</literal> <optional><replaceable>filename</replaceable></optional>
<literal>:etags</literal> <optional><replaceable>filename</replaceable></optional>
<indexterm><primary><literal>:etags</literal></primary>
</term>
<listitem>
<para>Generates a “tags” file for Vi-style editors
- (<literal>:ctags</literal>) or Emacs-style editors (<literal>etags</literal>). If
- no filename is specified, the defaulit <filename>tags</filename> or
+ (<literal>:ctags</literal>) or
+ Emacs-style editors (<literal>:etags</literal>). If
+ no filename is specified, the default <filename>tags</filename> or
<filename>TAGS</filename> is
used, respectively. Tags for all the functions, constructors and
types in the currently loaded modules are created. All modules must
<varlistentry>
<term>
- <literal>:def</literal> <replaceable>name</replaceable> <replaceable>expr</replaceable>
+ <literal>:def<optional>!</optional> <optional><replaceable>name</replaceable> <replaceable>expr</replaceable></optional></literal>
<indexterm><primary><literal>:def</literal></primary></indexterm>
</term>
<listitem>
- <para>The command <literal>:def</literal>
- <replaceable>name</replaceable>
- <replaceable>expr</replaceable> defines a new GHCi command
- <literal>:<replaceable>name</replaceable></literal>,
- implemented by the Haskell expression
- <replaceable>expr</replaceable>, which must have type
- <literal>String -> IO String</literal>. When
- <literal>:<replaceable>name</replaceable>
- <replaceable>args</replaceable></literal> is typed at the
- prompt, GHCi will run the expression
- <literal>(<replaceable>name</replaceable>
- <replaceable>args</replaceable>)</literal>, take the
- resulting <literal>String</literal>, and feed it back into
- GHCi as a new sequence of commands. Separate commands in
- the result must be separated by
- ‘<literal>\n</literal>’.</para>
+ <para><literal>:def</literal> is used to define new
+ commands, or macros, in GHCi. The command
+ <literal>:def</literal> <replaceable>name</replaceable>
+ <replaceable>expr</replaceable> defines a new GHCi command
+ <literal>:<replaceable>name</replaceable></literal>,
+ implemented by the Haskell expression
+ <replaceable>expr</replaceable>, which must have type
+ <literal>String -> IO String</literal>. When
+ <literal>:<replaceable>name</replaceable>
+ <replaceable>args</replaceable></literal> is typed at the
+ prompt, GHCi will run the expression
+ <literal>(<replaceable>name</replaceable>
+ <replaceable>args</replaceable>)</literal>, take the
+ resulting <literal>String</literal>, and feed it back into
+ GHCi as a new sequence of commands. Separate commands in
+ the result must be separated by
+ ‘<literal>\n</literal>’.</para>
<para>That's all a little confusing, so here's a few
examples. To start with, here's a new GHCi command which
<literal>:.</literal>, by analogy with the
‘<literal>.</literal>’ Unix shell command that
does the same thing.</para>
+
+ <para>Typing <literal>:def</literal> on its own lists the
+ currently-defined macros. Attempting to redefine an
+ existing command name results in an error unless the
+ <literal>:def!</literal> form is used, in which case the old
+ command with that name is silently overwritten.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
+ <literal>:etags</literal>
+ </term>
+ <listitem>
+ <para>See <literal>:ctags</literal>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>
<literal>:force <replaceable>identifier</replaceable> ...</literal>
<indexterm><primary><literal>:force</literal></primary></indexterm>
</term>
</varlistentry>
<varlistentry>
+ <term>
+ <literal>:</literal>
+ <indexterm><primary><literal>:</literal></primary></indexterm>
+ </term>
+ <listitem>
+ <para>Repeat the previous command.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+
<term>
<literal>:history [<replaceable>num</replaceable>]</literal>
<indexterm><primary><literal>:history</literal></primary></indexterm>
will be printed. If <replaceable>name</replaceable> has
been loaded from a source file, then GHCi will also display
the location of its definition in the source.</para>
+ <para>For types and classes, GHCi also summarises instances that
+ mention them. To avoid showing irrelevant information, an instance
+ is shown only if (a) its head mentions <replaceable>name</replaceable>,
+ and (b) all the other things mentioned in the instance
+ are in scope (either qualified or otherwise) as a result of
+ a <literal>:load</literal> or <literal>:module</literal> commands. </para>
</listitem>
</varlistentry>
However, we cannot simply pass the arguments to the
<literal>main</literal> function while we are testing in ghci,
as the <literal>main</literal> function doesn't take its
- directly.
+ arguments directly.
</para>
<para>
["foo","bar"]
</screen>
+ <para>
+ We can also quote arguments which contains characters like
+ spaces, and they are treated like Haskell strings, or we can
+ just use Haskell list syntax:
+ </para>
+
+<screen>
+Prelude> :main foo "bar baz"
+["foo","bar baz"]
+Prelude> :main ["foo", "bar baz"]
+["foo","bar baz"]
+</screen>
+
+ <para>
+ Finally, other functions can be called, either with the
+ <literal>-main-is</literal> flag or the <literal>:run</literal>
+ command:
+ </para>
+
+<screen>
+Prelude> let foo = putStrLn "foo" >> System.Environment.getArgs >>= print
+Prelude> let bar = putStrLn "bar" >> System.Environment.getArgs >>= print
+Prelude> :set -main-is foo
+Prelude> :main foo "bar baz"
+foo
+["foo","bar baz"]
+Prelude> :run bar ["foo", "bar baz"]
+bar
+["foo","bar baz"]
+</screen>
+
</listitem>
</varlistentry>
<listitem>
<para>Prints a value without forcing its evaluation.
<literal>:print</literal> may be used on values whose types are
- unkonwn or partially known, which might be the case for local
+ unknown or partially known, which might be the case for local
variables with polymorphic types at a breakpoint. While inspecting
the runtime value, <literal>:print</literal> attempts to
reconstruct the type of the value, and will elaborate the type in
<indexterm><primary><literal>:quit</literal></primary></indexterm>
</term>
<listitem>
- <para>Quits GHCi. You can also quit by typing a control-D
+ <para>Quits GHCi. You can also quit by typing control-D
at the prompt.</para>
</listitem>
</varlistentry>
<indexterm><primary><literal>:set</literal></primary></indexterm>
</term>
<listitem>
- <para>Sets various options. See <xref linkend="ghci-set"/>
- for a list of available options. The
- <literal>:set</literal> command by itself shows which
- options are currently set.</para>
+ <para>Sets various options. See <xref linkend="ghci-set"/> for a list of
+ available options and <xref linkend="interactive-mode-options"/> for a
+ list of GHCi-specific flags. The <literal>:set</literal> command by
+ itself shows which options are currently set. It also lists the current
+ dynamic flag settings, with GHCi-specific flags listed separately.</para>
</listitem>
</varlistentry>
<indexterm><primary><literal>:show modules</literal></primary></indexterm>
</term>
<listitem>
- <para>Show the list of modules currently load.</para>
+ <para>Show the list of modules currently loaded.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>
+ <literal>:show packages</literal>
+ <indexterm><primary><literal>:show packages</literal></primary></indexterm>
+ </term>
+ <listitem>
+ <para>Show the currently active package flags, as well as the list of
+ packages currently loaded.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>
+ <literal>:show languages</literal>
+ <indexterm><primary><literal>:show languages</literal></primary></indexterm>
+ </term>
+ <listitem>
+ <para>Show the currently active language flags.</para>
+ </listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term>
<literal>:show [args|prog|prompt|editor|stop]</literal>
<indexterm><primary><literal>:show</literal></primary></indexterm>
</term>
<para>The <literal>:set</literal> command sets two types of
options: GHCi options, which begin with
- ‘<literal>+</literal>” and “command-line”
+ ‘<literal>+</literal>’, and “command-line”
options, which begin with ‘-’. </para>
<para>NOTE: at the moment, the <literal>:set</literal> command
<indexterm><primary>startup</primary><secondary>files, GHCi</secondary>
</indexterm>
- <para>When it starts, GHCi always reads and executes commands from
- <filename>$HOME/.ghci</filename>, followed by
- <filename>./.ghci</filename>.</para>
-
- <para>The <filename>.ghci</filename> in your home directory is
- most useful for turning on favourite options (eg. <literal>:set
- +s</literal>), and defining useful macros. Placing a
- <filename>.ghci</filename> file in a directory with a Haskell
- project is a useful way to set certain project-wide options so you
- don't have to type them everytime you start GHCi: eg. if your
- project uses GHC extensions and CPP, and has source files in three
- subdirectories A B and C, you might put the following lines in
+ <para>When it starts, unless the <literal>-ignore-dot-ghci</literal>
+ flag is given, GHCi reads and executes commands from the following
+ files, in this order, if they exist:</para>
+
+ <orderedlist>
+ <listitem>
+ <para><filename>./.ghci</filename></para>
+ </listitem>
+ <listitem>
+ <para><literal><replaceable>appdata</replaceable>/ghc/ghci.conf</literal>,
+ where <replaceable>appdata</replaceable> depends on your system,
+ but is usually something like <literal>C:/Documents and Settings/<replaceable>user</replaceable>/Application Data</literal></para>
+ </listitem>
+ <listitem>
+ <para>On Unix: <literal>$HOME/.ghc/ghci.conf</literal></para>
+ </listitem>
+ <listitem>
+ <para><literal>$HOME/.ghci</literal></para>
+ </listitem>
+ </orderedlist>
+
+ <para>The <filename>ghci.conf</filename> file is most useful for
+ turning on favourite options (eg. <literal>:set +s</literal>), and
+ defining useful macros. Placing a <filename>.ghci</filename> file
+ in a directory with a Haskell project is a useful way to set
+ certain project-wide options so you don't have to type them
+ everytime you start GHCi: eg. if your project uses GHC extensions
+ and CPP, and has source files in three subdirectories A, B and C,
+ you might put the following lines in
<filename>.ghci</filename>:</para>
<screen>
<literal>:set</literal> like this. The changes won't take effect
until the next <literal>:load</literal>, though.)</para>
+ <para>Once you have a library of GHCi macros, you may want
+ to source them from separate files, or you may want to source
+ your <filename>.ghci</filename> file into your running GHCi
+ session while debugging it</para>
+
+<screen>
+:def source readFile
+</screen>
+
+ <para>With this macro defined in your <filename>.ghci</filename>
+ file, you can use <literal>:source file</literal> to read GHCi
+ commands from <literal>file</literal>. You can find (and contribute!-)
+ other suggestions for <filename>.ghci</filename> files on this Haskell
+ wiki page: <ulink
+ url="http://haskell.org/haskellwiki/GHC/GHCi">GHC/GHCi</ulink></para>
+
<para>Two command-line options control whether the
- <filename>.ghci</filename> files are read:</para>
+ startup files files are read:</para>
<variablelist>
<varlistentry>
<indexterm><primary><option>-ignore-dot-ghci</option></primary></indexterm>
</term>
<listitem>
- <para>Don't read either <filename>./.ghci</filename> or
- <filename>$HOME/.ghci</filename> when starting up.</para>
+ <para>Don't read either <filename>./.ghci</filename> or the
+ other startup files when starting up.</para>
</listitem>
</varlistentry>
<varlistentry>
<indexterm><primary><option>-read-dot-ghci</option></primary></indexterm>
</term>
<listitem>
- <para>Read <filename>.ghci</filename> and
- <filename>$HOME/.ghci</filename>. This is normally the
+ <para>Read <filename>./.ghci</filename> and the other
+ startup files (see above). This is normally the
default, but the <option>-read-dot-ghci</option> option may
be used to override a previous
<option>-ignore-dot-ghci</option> option.</para>
<term>I can't use Control-C to interrupt computations in
GHCi on Windows.</term>
<listitem>
- <para>See <xref linkend="ghci-windows"/></para>
+ <para>See <xref linkend="ghci-windows"/>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>The default buffering mode is different in GHCi to GHC.</term>
+ <listitem>
+ <para>
+ In GHC, the stdout handle is line-buffered by default.
+ However, in GHCi we turn off the buffering on stdout,
+ because this is normally what you want in an interpreter:
+ output appears as it is generated.
+ </para>
</listitem>
</varlistentry>
</variablelist>