-#-----------------------------------------------------------------------------
-# $Id: Makefile,v 1.24 2004/02/12 02:11:34 mthomas Exp $
-#
-TOP=.
+TOP=..
include $(TOP)/mk/boilerplate.mk
+include $(TOP)/mk/cabal-flags.mk
-#
-# subdir dependencies:
-# everything needs utils
-# includes/ needs driver (to easily c.pile mkNativeGen.c)
-# make depend except in {utils,driver} needs includes
-# RTS and compiler need includes
-#
-
-#
-# Order is important! It's e.g. necessary to descend into include/
-# before the rest to have a config.h, etc.
-#
-# If we're booting from .hc files, swap the order
-# we descend into subdirs - to boot utils must be before driver.
-#
-
-# First - check whether we should build the docs directory.
-# On Windows, the tools to build docs are not always available.
-
-ifneq "$(SGMLDocWays)" ""
-DOCS_DIR = docs
+ifeq "$(stage)" ""
+stage=1
+endif
+
+ifeq "$(HOSTPLATFORM)" "i386-unknown-mingw32"
+INSTALL_FLAGS =
else
-DOCS_DIR =
+INSTALL_FLAGS = --enable-shell-wrappers
endif
-ifeq "$(BootingFromHc)" "YES"
-SUBDIRS = includes rts $(DOCS_DIR) compiler utils driver
+# Don't strip the inplace versions, we might need to debug them
+INPLACE_INSTALL_FLAGS += --disable-executable-stripping
+
+boot:: boot.stage.$(stage)
+
+all:: build.stage.$(stage)
+
+rebuild ::
+ -$(CABAL) clean --distpref dist-stage$(stage)
+ $(RM) -rf stage$(stage)-inplace
+ $(MAKE) boot all
+
+stage1 ::
+ $(MAKE) stage=1
+
+stage2 ::
+ $(MAKE) stage=2
+
+stage3 ::
+ $(MAKE) stage=3
+
+ifeq "$(CLEAN_ALL_STAGES)" "YES"
+clean distclean:: clean.stage.1 clean.stage.2 clean.stage.3
else
-ifneq "$(ILXized)" "YES"
-SUBDIRS = includes utils driver $(DOCS_DIR) compiler rts
+clean distclean:: clean.stage.$(stage)
+endif
+
+clean.stage.%:
+ -$(CABAL) clean --distpref dist-stage$*
+ $(RM) -rf stage$*-inplace
+
+CONFIGURE_FLAGS_STAGE1 += --flags=-ghci
+
+ifeq "$(GhcWithInterpreter)" "YES"
+CONFIGURE_FLAGS_STAGE2 += --flags=ghci
else
-# No RTS for ILX
-SUBDIRS = includes utils driver $(DOCS_DIR) compiler
+CONFIGURE_FLAGS_STAGE2 += --flags=-ghci
endif
+
+ifeq "$(GhcProfiled)" "YES"
+CONFIGURE_FLAGS_STAGE2 += --enable-executable-profiling
+endif
+ifeq "$(GhcDebugged)" "YES"
+CONFIGURE_FLAGS_STAGE2 += --ghc-option=-debug
+endif
+ifeq "$(GhcThreaded)" "YES"
+# Use threaded RTS with GHCi, so threads don't get blocked at the prompt.
+CONFIGURE_FLAGS_STAGE2 += --ghc-option=-threaded
endif
-ifeq ($(IncludeTestDirsInBuild),YES)
-SUBDIRS += tests
+ifeq "$(BuildSharedLibs)" "YES"
+CONFIGURE_FLAGS_STAGE2 += --ghc-option=-dynamic
endif
-SRC_DIST_FILES += configure
+CONFIGURE_FLAGS_STAGE3 = $(CONFIGURE_FLAGS_STAGE2)
-DIST_CLEAN_FILES += config.cache config.status ghc.spec
+CONFIGURE_FLAGS_STAGE1 += $(USE_BOOT_CONFIGURE_FLAGS)
+CONFIGURE_FLAGS_STAGE2 += $(USE_STAGE1_CONFIGURE_FLAGS)
+CONFIGURE_FLAGS_STAGE3 += $(USE_STAGE2_CONFIGURE_FLAGS)
-extraclean::
- $(RM) -rf autom4te.cache
+# Allow EXTRA_HC_OPTS to be used from the command line to add options
+# when building (e.g. -v)
+BUILD_FLAGS=$(patsubst %, --ghc-option=%, $(EXTRA_HC_OPTS))
-ifeq "$(TARGETPLATFORM)" "i386-unknown-mingw32"
-# These files need to be in the InstallShield
-# INSTALL_DATAS rather than INSTALL_DOCS is used so these files go
-# in the top-level directory of the distribution
-INSTALL_DATAS += ANNOUNCE LICENSE README VERSION
+# XXX In stage2+ we should really use the inplace ghc-pkg
+# It works because installPackage doesn't actually use ghc-pkg, as there's
+# no library to register
+
+ifeq "$(stage)" "1"
+ifeq "$(ghc_ge_609)" "NO"
+# GHC 6.9+ can handle cross-package recompilation checking, but
+# we don't rely on the bootstrapping compiler being able to do this.
+TOUCH_MAIN = $(RM) dist-stage1/build/ghc/ghc-tmp/Main.o
+endif
endif
-include $(TOP)/mk/target.mk
+dist-stage1 dist-stage2 dist-stage3: dist-stage%: boot.stage.%
+
+boot.stage.%:
+ $(CABAL) configure --distpref dist-stage$* \
+ $(INSTALL_DIRS_CONFIGURE_FLAGS) \
+ $(CONFIGURE_FLAGS_STAGE$*) \
+ $(COMMON_CONFIGURE_FLAGS) \
+ --libsubdir=. \
+ --datadir='$$libdir' \
+ --datasubdir=.
+
+build.stage.%: dist-stage%
+ $(TOUCH_MAIN)
+ $(CABAL) build --distpref dist-stage$* $(BUILD_FLAGS)
+ $(INSTALL_PACKAGE) install '$(GHC_PKG_PROG)' 'XXX/package.conf' "" \
+ $(FPTOOLS_TOP_ABS)/ghc/stage$*-inplace \
+ $(FPTOOLS_TOP_ABS)/ghc/stage$*-inplace \
+ '$$prefix' \
+ '$(INPLACE_DATA_DIR)' \
+ '$$prefix/libexec' \
+ '$$prefix/dynlib' \
+ '$(INPLACE_DATA_DIR)' \
+ '$$prefix/doc' \
+ '$$prefix/html' \
+ '$$prefix/haddock' \
+ --distpref dist-stage$* \
+ $(INPLACE_INSTALL_FLAGS) \
+ $(INSTALL_FLAGS)
+
+# XXX For now we always install the stage 2 compiler
+install:
+ $(INSTALL_PACKAGE) install UNUSED UNUSED '$(DESTDIR)' '$(prefix)' \
+ '$(prefix)' '$(bindir)' '$(libdir)' \
+ '$(libexecdir)' '$(dynlibdir)' '$(datadir)' \
+ '$(docdir)' '$(htmldir)' '$(haddockdir)' \
+ --distpref dist-stage2 \
+ $(INSTALL_FLAGS)
+
+html:
+ @:
+
+install-docs:
+ @:
+
+include $(TOP)/mk/bindist.mk
+EXE_DIST_DIR = dist-stage$(stage)
+