%
-% (c) The GRASP/AQUA Project, Glasgow University, 1993-1996
+% (c) The GRASP/AQUA Project, Glasgow University, 1993-1998
%
\section[IdInfo]{@IdInfos@: Non-essential information about @Ids@}
Haskell. [WDP 94/11])
\begin{code}
-#include "HsVersions.h"
-
module IdInfo (
- IdInfo, -- abstract
- noIdInfo,
- boringIdInfo,
- ppIdInfo,
- applySubstToIdInfo, apply_to_IdInfo, -- not for general use, please
+ GlobalIdDetails(..), notGlobalId, -- Not abstract
- OptIdInfo(..), -- class; for convenience only
- -- all the *Infos herein are instances of it
+ IdInfo, -- Abstract
+ vanillaIdInfo, noCafIdInfo,
+ seqIdInfo, megaSeqIdInfo,
- -- component "id infos"; also abstract:
- SrcLoc,
- getSrcLocIdInfo,
+ -- Zapping
+ zapLamInfo, zapDemandInfo,
+ -- Arity
ArityInfo,
- mkArityInfo, unknownArity, arityMaybe,
-
- DemandInfo,
- mkDemandInfo,
- willBeDemanded,
-
- MatchEnv, -- the SpecEnv
- StrictnessInfo(..), -- non-abstract
- Demand(..), -- non-abstract
-
- wwLazy, wwStrict, wwUnpack, wwPrim, wwEnum,
- indicatesWorker, nonAbsentArgs,
- mkStrictnessInfo, mkBottomStrictnessInfo,
- getWrapperArgTypeCategories,
- getWorkerId,
- workerExists,
- bottomIsGuaranteed,
-
- mkUnfolding,
- noInfo_UF, getInfo_UF, addInfo_UF, -- to avoid instance virus
-
- UpdateInfo,
- mkUpdateInfo,
- UpdateSpec(..),
- updateInfoMaybe,
-
- DeforestInfo(..),
-
- ArgUsageInfo,
- ArgUsage(..),
- ArgUsageType(..),
- mkArgUsageInfo,
- getArgUsage,
-
- FBTypeInfo,
- FBType(..),
- FBConsum(..),
- FBProd(..),
- mkFBTypeInfo,
- getFBType
+ unknownArity,
+ arityInfo, setArityInfo, ppArityInfo,
+
+ -- New demand and strictness info
+ newStrictnessInfo, setNewStrictnessInfo,
+ newDemandInfo, setNewDemandInfo, pprNewStrictness,
+ setAllStrictnessInfo,
+
+#ifdef OLD_STRICTNESS
+ -- Strictness; imported from Demand
+ StrictnessInfo(..),
+ mkStrictnessInfo, noStrictnessInfo,
+ ppStrictnessInfo,isBottomingStrictness,
+#endif
- ) where
+ -- Worker
+ WorkerInfo(..), workerExists, wrapperArity, workerId,
+ workerInfo, setWorkerInfo, ppWorkerInfo,
-import Ubiq
-
-import IdLoop -- IdInfo is a dependency-loop ranch, and
- -- we break those loops by using IdLoop and
- -- *not* importing much of anything else,
- -- except from the very general "utils".
-
-import CmdLineOpts ( opt_OmitInterfacePragmas )
-import Maybes ( firstJust )
-import MatchEnv ( nullMEnv, isEmptyMEnv, mEnvToList )
-import Outputable ( ifPprInterface, Outputable(..){-instances-} )
-import PprStyle ( PprStyle(..) )
-import Pretty
-import SrcLoc ( mkUnknownSrcLoc )
-import Type ( eqSimpleTy )
-import Util ( mapAccumL, panic, assertPanic, pprPanic )
-
-applySubstToTy = panic "IdInfo.applySubstToTy"
-splitTypeWithDictsAsArgs = panic "IdInfo.splitTypeWithDictsAsArgs"
-showTypeCategory = panic "IdInfo.showTypeCategory"
-mkFormSummary = panic "IdInfo.mkFormSummary"
-occurAnalyseGlobalExpr = panic "IdInfo.occurAnalyseGlobalExpr"
-isWrapperFor = panic "IdInfo.isWrapperFor"
-pprCoreUnfolding = panic "IdInfo.pprCoreUnfolding"
-\end{code}
+ -- Unfolding
+ unfoldingInfo, setUnfoldingInfo, setUnfoldingInfoLazily,
-An @IdInfo@ gives {\em optional} information about an @Id@. If
-present it never lies, but it may not be present, in which case there
-is always a conservative assumption which can be made.
+#ifdef OLD_STRICTNESS
+ -- Old DemandInfo and StrictnessInfo
+ demandInfo, setDemandInfo,
+ strictnessInfo, setStrictnessInfo,
+ cprInfoFromNewStrictness,
+ oldStrictnessFromNew, newStrictnessFromOld,
+ oldDemand, newDemand,
-Two @Id@s may have different info even though they have the same
-@Unique@ (and are hence the same @Id@); for example, one might lack
-the properties attached to the other.
-
-The @IdInfo@ gives information about the value, or definition, of the
-@Id@. It does {\em not} contain information about the @Id@'s usage
-(except for @DemandInfo@? ToDo).
+ -- Constructed Product Result Info
+ CprInfo(..), cprInfo, setCprInfo, ppCprInfo, noCprInfo,
+#endif
-\begin{code}
-data IdInfo
- = IdInfo
- ArityInfo -- Its arity
+ -- Inline prags
+ InlinePragInfo,
+ inlinePragInfo, setInlinePragInfo,
- DemandInfo -- Whether or not it is definitely
- -- demanded
+ -- Occurrence info
+ OccInfo(..), isFragileOcc, isDeadOcc, isLoopBreaker,
+ InsideLam, OneBranch, insideLam, notInsideLam, oneBranch, notOneBranch,
+ occInfo, setOccInfo,
- (MatchEnv [Type] CoreExpr)
- -- Specialisations of this function which exist
- -- This corresponds to a SpecEnv which we do
- -- not import directly to avoid loop
+ -- Specialisation
+ SpecInfo(..), specInfo, setSpecInfo, isEmptySpecInfo,
+ specInfoFreeVars, specInfoRules, seqSpecInfo,
- StrictnessInfo -- Strictness properties, notably
- -- how to conjure up "worker" functions
+ -- CAF info
+ CafInfo(..), cafInfo, ppCafInfo, setCafInfo, mayHaveCafRefs,
- UnfoldingDetails -- Its unfolding; for locally-defined
- -- things, this can *only* be NoUnfoldingDetails
+ -- Lambda-bound variable info
+ LBVarInfo(..), lbvarInfo, setLBVarInfo, noLBVarInfo, hasNoLBVarInfo
+ ) where
- UpdateInfo -- Which args should be updated
+#include "HsVersions.h"
- DeforestInfo -- Whether its definition should be
- -- unfolded during deforestation
- ArgUsageInfo -- how this Id uses its arguments
+import CoreSyn
+import Class ( Class )
+import PrimOp ( PrimOp )
+import Var ( Id )
+import VarSet ( VarSet, emptyVarSet, seqVarSet )
+import BasicTypes ( OccInfo(..), isFragileOcc, isDeadOcc, seqOccInfo, isLoopBreaker,
+ InsideLam, insideLam, notInsideLam,
+ OneBranch, oneBranch, notOneBranch,
+ Arity,
+ Activation(..)
+ )
+import DataCon ( DataCon )
+import TyCon ( TyCon, FieldLabel )
+import ForeignCall ( ForeignCall )
+import NewDemand
+import Outputable
+import Maybe ( isJust )
+
+#ifdef OLD_STRICTNESS
+import Name ( Name )
+import Demand hiding( Demand, seqDemand )
+import qualified Demand
+import Util ( listLengthCmp )
+import List ( replicate )
+#endif
- FBTypeInfo -- the Foldr/Build W/W property of this function.
+-- infixl so you can say (id `set` a `set` b)
+infixl 1 `setSpecInfo`,
+ `setArityInfo`,
+ `setInlinePragInfo`,
+ `setUnfoldingInfo`,
+ `setWorkerInfo`,
+ `setLBVarInfo`,
+ `setOccInfo`,
+ `setCafInfo`,
+ `setNewStrictnessInfo`,
+ `setAllStrictnessInfo`,
+ `setNewDemandInfo`
+#ifdef OLD_STRICTNESS
+ , `setCprInfo`
+ , `setDemandInfo`
+ , `setStrictnessInfo`
+#endif
+\end{code}
- SrcLoc -- Source location of definition
+%************************************************************************
+%* *
+\subsection{New strictness info}
+%* *
+%************************************************************************
- -- ToDo: SrcLoc is in FullNames too (could rm?) but it
- -- is needed here too for things like ConstMethodIds and the
- -- like, which don't have full-names of their own Mind you,
- -- perhaps the Name for a constant method could give the
- -- class/type involved?
-\end{code}
+To be removed later
\begin{code}
-noIdInfo = IdInfo noInfo noInfo noInfo noInfo noInfo_UF
- noInfo noInfo noInfo noInfo mkUnknownSrcLoc
-
--- "boring" means: nothing to put in interface
-boringIdInfo (IdInfo UnknownArity
- UnknownDemand
- specenv
- strictness
- unfolding
- NoUpdateInfo
- Don'tDeforest
- _ {- arg_usage: currently no interface effect -}
- _ {- no f/b w/w -}
- _ {- src_loc: no effect on interfaces-}
- )
- | null (mEnvToList specenv)
- && boring_strictness strictness
- && boring_unfolding unfolding
- = True
- where
- boring_strictness NoStrictnessInfo = True
- boring_strictness BottomGuaranteed = False
- boring_strictness (StrictnessInfo wrap_args _) = all_present_WwLazies wrap_args
+-- setAllStrictnessInfo :: IdInfo -> Maybe StrictSig -> IdInfo
+-- Set old and new strictness info
+setAllStrictnessInfo info Nothing
+ = info { newStrictnessInfo = Nothing
+#ifdef OLD_STRICTNESS
+ , strictnessInfo = NoStrictnessInfo
+ , cprInfo = NoCPRInfo
+#endif
+ }
- boring_unfolding NoUnfoldingDetails = True
- boring_unfolding _ = False
+setAllStrictnessInfo info (Just sig)
+ = info { newStrictnessInfo = Just sig
+#ifdef OLD_STRICTNESS
+ , strictnessInfo = oldStrictnessFromNew sig
+ , cprInfo = cprInfoFromNewStrictness sig
+#endif
+ }
-boringIdInfo _ = False
+seqNewStrictnessInfo Nothing = ()
+seqNewStrictnessInfo (Just ty) = seqStrictSig ty
-pp_NONE = ppPStr SLIT("_N_")
-\end{code}
+pprNewStrictness Nothing = empty
+pprNewStrictness (Just sig) = ftext FSLIT("Str:") <+> ppr sig
-Simply turgid. But BE CAREFUL: don't @apply_to_Id@ if that @Id@
-will in turn @apply_to_IdInfo@ of the self-same @IdInfo@. (A very
-nasty loop, friends...)
-\begin{code}
-apply_to_IdInfo ty_fn idinfo@(IdInfo arity demand spec strictness unfold
- update deforest arg_usage fb_ww srcloc)
- | isEmptyMEnv spec
- = idinfo
- | otherwise
- = panic "IdInfo:apply_to_IdInfo"
-{- LATER:
- let
- new_spec = apply_spec spec
-
- -- NOT a good idea:
- -- apply_strict strictness `thenLft` \ new_strict ->
- -- apply_wrap wrap `thenLft` \ new_wrap ->
- in
- IdInfo arity demand new_spec strictness unfold
- update deforest arg_usage fb_ww srcloc
- where
- apply_spec (SpecEnv is)
- = SpecEnv (map do_one is)
- where
- do_one (SpecInfo ty_maybes ds spec_id)
- = --apply_to_Id ty_fn spec_id `thenLft` \ new_spec_id ->
- SpecInfo (map apply_to_maybe ty_maybes) ds spec_id
- where
- apply_to_maybe Nothing = Nothing
- apply_to_maybe (Just ty) = Just (ty_fn ty)
--}
-
-{- NOT a good idea;
- apply_strict info@NoStrictnessInfo = returnLft info
- apply_strict BottomGuaranteed = ???
- apply_strict (StrictnessInfo wrap_arg_info id_maybe)
- = (case id_maybe of
- Nothing -> returnLft Nothing
- Just xx -> applySubstToId subst xx `thenLft` \ new_xx ->
- returnLft (Just new_xx)
- ) `thenLft` \ new_id_maybe ->
- returnLft (StrictnessInfo wrap_arg_info new_id_maybe)
--}
-\end{code}
+#ifdef OLD_STRICTNESS
+oldStrictnessFromNew :: StrictSig -> Demand.StrictnessInfo
+oldStrictnessFromNew sig = mkStrictnessInfo (map oldDemand dmds, isBotRes res_info)
+ where
+ (dmds, res_info) = splitStrictSig sig
-Variant of the same thing for the typechecker.
-\begin{code}
-applySubstToIdInfo s0 (IdInfo arity demand spec strictness unfold
- update deforest arg_usage fb_ww srcloc)
- = panic "IdInfo:applySubstToIdInfo"
-{- LATER:
- case (apply_spec s0 spec) of { (s1, new_spec) ->
- (s1, IdInfo arity demand new_spec strictness unfold update deforest arg_usage fb_ww srcloc) }
- where
- apply_spec s0 (SpecEnv is)
- = case (mapAccumL do_one s0 is) of { (s1, new_is) ->
- (s1, SpecEnv new_is) }
- where
- do_one s0 (SpecInfo ty_maybes ds spec_id)
- = case (mapAccumL apply_to_maybe s0 ty_maybes) of { (s1, new_maybes) ->
- (s1, SpecInfo new_maybes ds spec_id) }
- where
- apply_to_maybe s0 Nothing = (s0, Nothing)
- apply_to_maybe s0 (Just ty)
- = case (applySubstToTy s0 ty) of { (s1, new_ty) ->
- (s1, Just new_ty) }
--}
-\end{code}
+cprInfoFromNewStrictness :: StrictSig -> CprInfo
+cprInfoFromNewStrictness sig = case strictSigResInfo sig of
+ RetCPR -> ReturnsCPR
+ other -> NoCPRInfo
-\begin{code}
-ppIdInfo :: PprStyle
- -> Id -- The Id for which we're printing this IdInfo
- -> Bool -- True <=> print specialisations, please
- -> (Id -> Id) -- to look up "better Ids" w/ better IdInfos;
- -> IdEnv UnfoldingDetails
- -- inlining info for top-level fns in this module
- -> IdInfo -- see MkIface notes
- -> Pretty
-
-ppIdInfo sty for_this_id specs_please better_id_fn inline_env
- i@(IdInfo arity demand specenv strictness unfold update deforest arg_usage fbtype srcloc)
- | boringIdInfo i
- = ppPStr SLIT("_NI_")
+newStrictnessFromOld :: Name -> Arity -> Demand.StrictnessInfo -> CprInfo -> StrictSig
+newStrictnessFromOld name arity (Demand.StrictnessInfo ds res) cpr
+ | listLengthCmp ds arity /= GT -- length ds <= arity
+ -- Sometimes the old strictness analyser has more
+ -- demands than the arity justifies
+ = mk_strict_sig name arity $
+ mkTopDmdType (map newDemand ds) (newRes res cpr)
- | otherwise
- = let
- stuff = ppCat [
- -- order is important!:
- ppInfo sty better_id_fn arity,
- ppInfo sty better_id_fn update,
- ppInfo sty better_id_fn deforest,
-
- pp_strictness sty (Just for_this_id)
- better_id_fn inline_env strictness,
-
- if bottomIsGuaranteed strictness
- then pp_NONE
- else pp_unfolding sty for_this_id inline_env unfold,
-
- if specs_please
- then ppSpecs sty (not (isDataCon for_this_id))
- better_id_fn inline_env (mEnvToList specenv)
- else pp_NONE,
-
- -- DemandInfo needn't be printed since it has no effect on interfaces
- ppInfo sty better_id_fn demand,
- ppInfo sty better_id_fn fbtype
- ]
- in
- case sty of
- PprInterface -> if opt_OmitInterfacePragmas
- then ppNil
- else stuff
- _ -> stuff
-\end{code}
+newStrictnessFromOld name arity other cpr
+ = -- Either no strictness info, or arity is too small
+ -- In either case we can't say anything useful
+ mk_strict_sig name arity $
+ mkTopDmdType (replicate arity lazyDmd) (newRes False cpr)
-%************************************************************************
-%* *
-\subsection[OptIdInfo-class]{The @OptIdInfo@ class (keeps things tidier)}
-%* *
-%************************************************************************
+mk_strict_sig name arity dmd_ty
+ = WARN( arity /= dmdTypeDepth dmd_ty, ppr name <+> (ppr arity $$ ppr dmd_ty) )
+ mkStrictSig dmd_ty
-\begin{code}
-class OptIdInfo a where
- noInfo :: a
- getInfo :: IdInfo -> a
- addInfo :: IdInfo -> a -> IdInfo
- -- By default, "addInfo" will not overwrite
- -- "info" with "non-info"; look at any instance
- -- to see an example.
- ppInfo :: PprStyle -> (Id -> Id) -> a -> Pretty
+newRes True _ = BotRes
+newRes False ReturnsCPR = retCPR
+newRes False NoCPRInfo = TopRes
+
+newDemand :: Demand.Demand -> NewDemand.Demand
+newDemand (WwLazy True) = Abs
+newDemand (WwLazy False) = lazyDmd
+newDemand WwStrict = evalDmd
+newDemand (WwUnpack unpk ds) = Eval (Prod (map newDemand ds))
+newDemand WwPrim = lazyDmd
+newDemand WwEnum = evalDmd
+
+oldDemand :: NewDemand.Demand -> Demand.Demand
+oldDemand Abs = WwLazy True
+oldDemand Top = WwLazy False
+oldDemand Bot = WwStrict
+oldDemand (Box Bot) = WwStrict
+oldDemand (Box Abs) = WwLazy False
+oldDemand (Box (Eval _)) = WwStrict -- Pass box only
+oldDemand (Defer d) = WwLazy False
+oldDemand (Eval (Prod ds)) = WwUnpack True (map oldDemand ds)
+oldDemand (Eval (Poly _)) = WwStrict
+oldDemand (Call _) = WwStrict
+
+#endif /* OLD_STRICTNESS */
\end{code}
-%************************************************************************
-%* *
-\subsection[srcloc-IdInfo]{Source-location info in an @IdInfo@}
-%* *
-%************************************************************************
-Not used much, but...
\begin{code}
-getSrcLocIdInfo (IdInfo _ _ _ _ _ _ _ _ _ src_loc) = src_loc
+seqNewDemandInfo Nothing = ()
+seqNewDemandInfo (Just dmd) = seqDemand dmd
\end{code}
+
%************************************************************************
%* *
-\subsection[arity-IdInfo]{Arity info about an @Id@}
+\subsection{GlobalIdDetails
%* *
%************************************************************************
-\begin{code}
-data ArityInfo
- = UnknownArity -- no idea
- | ArityExactly Int -- arity is exactly this
-\end{code}
+This type is here (rather than in Id.lhs) mainly because there's
+an IdInfo.hi-boot, but no Id.hi-boot, and GlobalIdDetails is imported
+(recursively) by Var.lhs.
\begin{code}
-mkArityInfo = ArityExactly
-unknownArity = UnknownArity
+data GlobalIdDetails
+ = VanillaGlobal -- Imported from elsewhere, a default method Id.
-arityMaybe :: ArityInfo -> Maybe Int
+ | RecordSelId -- The Id for a record selector
+ { sel_tycon :: TyCon
+ , sel_label :: FieldLabel
+ , sel_naughty :: Bool -- True <=> naughty
+ } -- See Note [Naughty record selectors]
+ -- with MkId.mkRecordSelectorId
-arityMaybe UnknownArity = Nothing
-arityMaybe (ArityExactly i) = Just i
-\end{code}
+ | DataConWorkId DataCon -- The Id for a data constructor *worker*
+ | DataConWrapId DataCon -- The Id for a data constructor *wrapper*
+ -- [the only reasons we need to know is so that
+ -- a) to support isImplicitId
+ -- b) when desugaring a RecordCon we can get
+ -- from the Id back to the data con]
-\begin{code}
-instance OptIdInfo ArityInfo where
- noInfo = UnknownArity
+ | ClassOpId Class -- An operation of a class
- getInfo (IdInfo arity _ _ _ _ _ _ _ _ _) = arity
+ | PrimOpId PrimOp -- The Id for a primitive operator
+ | FCallId ForeignCall -- The Id for a foreign call
- addInfo id_info UnknownArity = id_info
- addInfo (IdInfo _ a c d e f g h i j) arity = IdInfo arity a c d e f g h i j
+ | NotGlobalId -- Used as a convenient extra return value from globalIdDetails
+
+notGlobalId = NotGlobalId
- ppInfo sty _ UnknownArity = ifPprInterface sty pp_NONE
- ppInfo sty _ (ArityExactly arity) = ppCat [ppPStr SLIT("_A_"), ppInt arity]
+instance Outputable GlobalIdDetails where
+ ppr NotGlobalId = ptext SLIT("[***NotGlobalId***]")
+ ppr VanillaGlobal = ptext SLIT("[GlobalId]")
+ ppr (DataConWorkId _) = ptext SLIT("[DataCon]")
+ ppr (DataConWrapId _) = ptext SLIT("[DataConWrapper]")
+ ppr (ClassOpId _) = ptext SLIT("[ClassOp]")
+ ppr (PrimOpId _) = ptext SLIT("[PrimOp]")
+ ppr (FCallId _) = ptext SLIT("[ForeignCall]")
+ ppr (RecordSelId {}) = ptext SLIT("[RecSel]")
\end{code}
+
%************************************************************************
%* *
-\subsection[demand-IdInfo]{Demand info about an @Id@}
+\subsection{The main IdInfo type}
%* *
%************************************************************************
-Whether a value is certain to be demanded or not. (This is the
-information that is computed by the ``front-end'' of the strictness
-analyser.)
+An @IdInfo@ gives {\em optional} information about an @Id@. If
+present it never lies, but it may not be present, in which case there
+is always a conservative assumption which can be made.
+
+Two @Id@s may have different info even though they have the same
+@Unique@ (and are hence the same @Id@); for example, one might lack
+the properties attached to the other.
-This information is only used within a module, it is not exported
-(obviously).
+The @IdInfo@ gives information about the value, or definition, of the
+@Id@. It does {\em not} contain information about the @Id@'s usage
+(except for @DemandInfo@? ToDo). (@lbvarInfo@ is also a marginal
+case. KSW 1999-04).
\begin{code}
-data DemandInfo
- = UnknownDemand
- | DemandedAsPer Demand
+data IdInfo
+ = IdInfo {
+ arityInfo :: !ArityInfo, -- Its arity
+ specInfo :: SpecInfo, -- Specialisations of this function which exist
+#ifdef OLD_STRICTNESS
+ cprInfo :: CprInfo, -- Function always constructs a product result
+ demandInfo :: Demand.Demand, -- Whether or not it is definitely demanded
+ strictnessInfo :: StrictnessInfo, -- Strictness properties
+#endif
+ workerInfo :: WorkerInfo, -- Pointer to Worker Function
+ -- Within one module this is irrelevant; the
+ -- inlining of a worker is handled via the Unfolding
+ -- WorkerInfo is used *only* to indicate the form of
+ -- the RHS, so that interface files don't actually
+ -- need to contain the RHS; it can be derived from
+ -- the strictness info
+
+ unfoldingInfo :: Unfolding, -- Its unfolding
+ cafInfo :: CafInfo, -- CAF info
+ lbvarInfo :: LBVarInfo, -- Info about a lambda-bound variable
+ inlinePragInfo :: InlinePragInfo, -- Inline pragma
+ occInfo :: OccInfo, -- How it occurs
+
+ newStrictnessInfo :: Maybe StrictSig, -- Reason for Maybe: the DmdAnal phase needs to
+ -- know whether whether this is the first visit,
+ -- so it can assign botSig. Other customers want
+ -- topSig. So Nothing is good.
+
+ newDemandInfo :: Maybe Demand -- Similarly we want to know if there's no
+ -- known demand yet, for when we are looking for
+ -- CPR info
+ }
+
+seqIdInfo :: IdInfo -> ()
+seqIdInfo (IdInfo {}) = ()
+
+megaSeqIdInfo :: IdInfo -> ()
+megaSeqIdInfo info
+ = seqSpecInfo (specInfo info) `seq`
+ seqWorker (workerInfo info) `seq`
+
+-- Omitting this improves runtimes a little, presumably because
+-- some unfoldings are not calculated at all
+-- seqUnfolding (unfoldingInfo info) `seq`
+
+ seqNewDemandInfo (newDemandInfo info) `seq`
+ seqNewStrictnessInfo (newStrictnessInfo info) `seq`
+
+#ifdef OLD_STRICTNESS
+ Demand.seqDemand (demandInfo info) `seq`
+ seqStrictnessInfo (strictnessInfo info) `seq`
+ seqCpr (cprInfo info) `seq`
+#endif
+
+ seqCaf (cafInfo info) `seq`
+ seqLBVar (lbvarInfo info) `seq`
+ seqOccInfo (occInfo info)
\end{code}
+Setters
+
\begin{code}
-mkDemandInfo :: Demand -> DemandInfo
-mkDemandInfo demand = DemandedAsPer demand
+setWorkerInfo info wk = wk `seq` info { workerInfo = wk }
+setSpecInfo info sp = sp `seq` info { specInfo = sp }
+setInlinePragInfo info pr = pr `seq` info { inlinePragInfo = pr }
+setOccInfo info oc = oc `seq` info { occInfo = oc }
+#ifdef OLD_STRICTNESS
+setStrictnessInfo info st = st `seq` info { strictnessInfo = st }
+#endif
+ -- Try to avoid spack leaks by seq'ing
+
+setUnfoldingInfoLazily info uf -- Lazy variant to avoid looking at the
+ = -- unfolding of an imported Id unless necessary
+ info { unfoldingInfo = uf } -- (In this case the demand-zapping is redundant.)
+
+setUnfoldingInfo info uf
+ -- We do *not* seq on the unfolding info, For some reason, doing so
+ -- actually increases residency significantly.
+ = info { unfoldingInfo = uf }
+
+#ifdef OLD_STRICTNESS
+setDemandInfo info dd = info { demandInfo = dd }
+setCprInfo info cp = info { cprInfo = cp }
+#endif
+
+setArityInfo info ar = info { arityInfo = ar }
+setCafInfo info caf = info { cafInfo = caf }
+
+setLBVarInfo info lb = {-lb `seq`-} info { lbvarInfo = lb }
-willBeDemanded :: DemandInfo -> Bool
-willBeDemanded (DemandedAsPer demand) = isStrict demand
-willBeDemanded _ = False
+setNewDemandInfo info dd = dd `seq` info { newDemandInfo = dd }
+setNewStrictnessInfo info dd = dd `seq` info { newStrictnessInfo = dd }
\end{code}
+
\begin{code}
-instance OptIdInfo DemandInfo where
- noInfo = UnknownDemand
-
- getInfo (IdInfo _ demand _ _ _ _ _ _ _ _) = demand
-
-{- DELETED! If this line is in, there is no way to
- nuke a DemandInfo, and we have to be able to do that
- when floating let-bindings around
- addInfo id_info UnknownDemand = id_info
--}
- addInfo (IdInfo a _ c d e f g h i j) demand = IdInfo a demand c d e f g h i j
-
- ppInfo PprInterface _ _ = ppNil
- ppInfo sty _ UnknownDemand = ppStr "{-# L #-}"
- ppInfo sty _ (DemandedAsPer info)
- = ppCat [ppStr "{-#", ppStr (showList [info] ""), ppStr "#-}"]
+vanillaIdInfo :: IdInfo
+vanillaIdInfo
+ = IdInfo {
+ cafInfo = vanillaCafInfo,
+ arityInfo = unknownArity,
+#ifdef OLD_STRICTNESS
+ cprInfo = NoCPRInfo,
+ demandInfo = wwLazy,
+ strictnessInfo = NoStrictnessInfo,
+#endif
+ specInfo = emptySpecInfo,
+ workerInfo = NoWorker,
+ unfoldingInfo = noUnfolding,
+ lbvarInfo = NoLBVarInfo,
+ inlinePragInfo = AlwaysActive,
+ occInfo = NoOccInfo,
+ newDemandInfo = Nothing,
+ newStrictnessInfo = Nothing
+ }
+
+noCafIdInfo = vanillaIdInfo `setCafInfo` NoCafRefs
+ -- Used for built-in type Ids in MkId.
\end{code}
+
%************************************************************************
%* *
-\subsection[specialisation-IdInfo]{Specialisation info about an @Id@}
+\subsection[arity-IdInfo]{Arity info about an @Id@}
%* *
%************************************************************************
-See SpecEnv.lhs
+For locally-defined Ids, the code generator maintains its own notion
+of their arities; so it should not be asking... (but other things
+besides the code-generator need arity info!)
\begin{code}
-instance OptIdInfo (MatchEnv [Type] CoreExpr) where
- noInfo = nullMEnv
-
- getInfo (IdInfo _ _ spec _ _ _ _ _ _ _) = spec
+type ArityInfo = Arity
+ -- A partial application of this Id to up to n-1 value arguments
+ -- does essentially no work. That is not necessarily the
+ -- same as saying that it has n leading lambdas, because coerces
+ -- may get in the way.
- addInfo id_info spec | null (mEnvToList spec) = id_info
- addInfo (IdInfo a b _ d e f g h i j) spec = IdInfo a b spec d e f g h i j
+ -- The arity might increase later in the compilation process, if
+ -- an extra lambda floats up to the binding site.
- ppInfo sty better_id_fn spec
- = ppSpecs sty True better_id_fn nullIdEnv (mEnvToList spec)
+unknownArity = 0 :: Arity
-ppSpecs sty print_spec_id_info better_id_fn inline_env spec_env
- = panic "IdInfo:ppSpecs"
+ppArityInfo 0 = empty
+ppArityInfo n = hsep [ptext SLIT("Arity"), int n]
\end{code}
%************************************************************************
%* *
-\subsection[strictness-IdInfo]{Strictness info about an @Id@}
+\subsection{Inline-pragma information}
%* *
%************************************************************************
-We specify the strictness of a function by giving information about
-each of the ``wrapper's'' arguments (see the description about
-worker/wrapper-style transformations in the PJ/Launchbury paper on
-unboxed types).
-
-The list of @Demands@ specifies: (a)~the strictness properties
-of a function's arguments; (b)~the {\em existence} of a ``worker''
-version of the function; and (c)~the type signature of that worker (if
-it exists); i.e. its calling convention.
-
\begin{code}
-data StrictnessInfo
- = NoStrictnessInfo
+type InlinePragInfo = Activation
+ -- Tells when the inlining is active
+ -- When it is active the thing may be inlined, depending on how
+ -- big it is.
+ --
+ -- If there was an INLINE pragma, then as a separate matter, the
+ -- RHS will have been made to look small with a CoreSyn Inline Note
- | BottomGuaranteed -- This Id guarantees never to return;
- -- it is bottom regardless of its arguments.
- -- Useful for "error" and other disguised
- -- variants thereof.
-
- | StrictnessInfo [Demand] -- the main stuff; see below.
- (Maybe Id) -- worker's Id, if applicable.
+ -- The default InlinePragInfo is AlwaysActive, so the info serves
+ -- entirely as a way to inhibit inlining until we want it
\end{code}
-This type is also actually used in the strictness analyser:
-\begin{code}
-data Demand
- = WwLazy -- Argument is lazy as far as we know
- MaybeAbsent -- (does not imply worker's existence [etc]).
- -- If MaybeAbsent == True, then it is
- -- *definitely* lazy. (NB: Absence implies
- -- a worker...)
-
- | WwStrict -- Argument is strict but that's all we know
- -- (does not imply worker's existence or any
- -- calling-convention magic)
-
- | WwUnpack -- Argument is strict & a single-constructor
- [Demand] -- type; its constituent parts (whose StrictInfos
- -- are in the list) should be passed
- -- as arguments to the worker.
-
- | WwPrim -- Argument is of primitive type, therefore
- -- strict; doesn't imply existence of a worker;
- -- argument should be passed as is to worker.
-
- | WwEnum -- Argument is strict & an enumeration type;
- -- an Int# representing the tag (start counting
- -- at zero) should be passed to the worker.
- deriving (Eq, Ord)
- -- we need Eq/Ord to cross-chk update infos in interfaces
-
-type MaybeAbsent = Bool -- True <=> not even used
-
--- versions that don't worry about Absence:
-wwLazy = WwLazy False
-wwStrict = WwStrict
-wwUnpack xs = WwUnpack xs
-wwPrim = WwPrim
-wwEnum = WwEnum
-\end{code}
-
-\begin{code}
-mkStrictnessInfo :: [Demand] -> Maybe Id -> StrictnessInfo
-mkStrictnessInfo [] _ = NoStrictnessInfo
-mkStrictnessInfo xs wrkr = StrictnessInfo xs wrkr
+%************************************************************************
+%* *
+ SpecInfo
+%* *
+%************************************************************************
-mkBottomStrictnessInfo = BottomGuaranteed
+\begin{code}
+-- CoreRules is used only in an idSpecialisation (move to IdInfo?)
+data SpecInfo
+ = SpecInfo [CoreRule] VarSet -- Locally-defined free vars of RHSs
-bottomIsGuaranteed BottomGuaranteed = True
-bottomIsGuaranteed other = False
+emptySpecInfo :: SpecInfo
+emptySpecInfo = SpecInfo [] emptyVarSet
-getWrapperArgTypeCategories
- :: Type -- wrapper's type
- -> StrictnessInfo -- strictness info about its args
- -> Maybe String
+isEmptySpecInfo :: SpecInfo -> Bool
+isEmptySpecInfo (SpecInfo rs _) = null rs
-getWrapperArgTypeCategories _ NoStrictnessInfo = Nothing
-getWrapperArgTypeCategories _ BottomGuaranteed
- = trace "getWrapperArgTypeCategories:BottomGuaranteed!" Nothing -- wrong
-getWrapperArgTypeCategories _ (StrictnessInfo [] _) = Nothing
+specInfoFreeVars :: SpecInfo -> VarSet
+specInfoFreeVars (SpecInfo _ fvs) = fvs
-getWrapperArgTypeCategories ty (StrictnessInfo arg_info _)
- = Just (mkWrapperArgTypeCategories ty arg_info)
+specInfoRules :: SpecInfo -> [CoreRule]
+specInfoRules (SpecInfo rules _) = rules
-workerExists :: StrictnessInfo -> Bool
-workerExists (StrictnessInfo _ (Just worker_id)) = True
-workerExists other = False
+seqSpecInfo (SpecInfo rules fvs) = seqRules rules `seq` seqVarSet fvs
+\end{code}
-getWorkerId :: StrictnessInfo -> Id
-getWorkerId (StrictnessInfo _ (Just worker_id)) = worker_id
-#ifdef DEBUG
-getWorkerId junk = pprPanic "getWorkerId: " (ppInfo PprDebug (\x->x) junk)
-#endif
-\end{code}
+%************************************************************************
+%* *
+\subsection[worker-IdInfo]{Worker info about an @Id@}
+%* *
+%************************************************************************
-\begin{code}
-isStrict :: Demand -> Bool
+If this Id has a worker then we store a reference to it. Worker
+functions are generated by the worker/wrapper pass. This uses
+information from strictness analysis.
-isStrict WwStrict = True
-isStrict (WwUnpack _) = True
-isStrict WwPrim = True
-isStrict WwEnum = True
-isStrict _ = False
+There might not be a worker, even for a strict function, because:
+(a) the function might be small enough to inline, so no need
+ for w/w split
+(b) the strictness info might be "SSS" or something, so no w/w split.
-nonAbsentArgs :: [Demand] -> Int
+Sometimes the arity of a wrapper changes from the original arity from
+which it was generated, so we always emit the "original" arity into
+the interface file, as part of the worker info.
-nonAbsentArgs cmpts
- = foldr tick_non 0 cmpts
- where
- tick_non (WwLazy True) acc = acc
- tick_non other acc = acc + 1
+How can this happen? Sometimes we get
+ f = coerce t (\x y -> $wf x y)
+at the moment of w/w split; but the eta reducer turns it into
+ f = coerce t $wf
+which is perfectly fine except that the exposed arity so far as
+the code generator is concerned (zero) differs from the arity
+when we did the split (2).
-all_present_WwLazies :: [Demand] -> Bool
-all_present_WwLazies infos
- = and (map is_L infos)
- where
- is_L (WwLazy False) = True -- False <=> "Absent" args do *not* count!
- is_L _ = False -- (as they imply a worker)
-\end{code}
+All this arises because we use 'arity' to mean "exactly how many
+top level lambdas are there" in interface files; but during the
+compilation of this module it means "how many things can I apply
+this to".
-WDP 95/04: It is no longer enough to look at a list of @Demands@ for
-an ``Unpack'' or an ``Absent'' and declare a worker. We also have to
-check that @mAX_WORKER_ARGS@ hasn't been exceeded. Therefore,
-@indicatesWorker@ mirrors the process used in @mk_ww_arg_processing@
-in \tr{WwLib.lhs}. A worker is ``indicated'' when we hit an Unpack
-or an Absent {\em that we accept}.
\begin{code}
-indicatesWorker :: [Demand] -> Bool
-indicatesWorker dems
- = fake_mk_ww (_trace "mAX_WORKER_ARGS" 6 - nonAbsentArgs dems) dems
- where
- fake_mk_ww _ [] = False
- fake_mk_ww _ (WwLazy True : _) = True -- we accepted an Absent
- fake_mk_ww extra_args (WwUnpack cmpnts : dems)
- | extra_args_now > 0 = True -- we accepted an Unpack
- where
- extra_args_now = extra_args + 1 - nonAbsentArgs cmpnts
-
- fake_mk_ww extra_args (_ : dems)
- = fake_mk_ww extra_args dems
-\end{code}
+data WorkerInfo = NoWorker
+ | HasWorker Id Arity
+ -- The Arity is the arity of the *wrapper* at the moment of the
+ -- w/w split. See notes above.
-\begin{code}
-mkWrapperArgTypeCategories
- :: Type -- wrapper's type
- -> [Demand] -- info about its arguments
- -> String -- a string saying lots about the args
-
-mkWrapperArgTypeCategories wrapper_ty wrap_info
- = case (splitTypeWithDictsAsArgs wrapper_ty) of { (_,arg_tys,_) ->
- map do_one (wrap_info `zip` (map showTypeCategory arg_tys))
- }
- where
- -- ToDo: this needs FIXING UP (it was a hack anyway...)
- do_one (WwPrim, _) = 'P'
- do_one (WwEnum, _) = 'E'
- do_one (WwStrict, arg_ty_char) = arg_ty_char
- do_one (WwUnpack _, arg_ty_char)
- = if arg_ty_char `elem` "CIJFDTS"
- then toLower arg_ty_char
- else if arg_ty_char == '+' then 't'
- else trace ("mkWrapp..:funny char:"++[arg_ty_char]) '-'
- do_one (other_wrap_info, _) = '-'
-\end{code}
+seqWorker :: WorkerInfo -> ()
+seqWorker (HasWorker id a) = id `seq` a `seq` ()
+seqWorker NoWorker = ()
-Whether a worker exists depends on whether the worker has an
-absent argument, a @WwUnpack@ argument, (or @WwEnum@ ToDo???) arguments.
+ppWorkerInfo NoWorker = empty
+ppWorkerInfo (HasWorker wk_id _) = ptext SLIT("Worker") <+> ppr wk_id
-If a @WwUnpack@ argument is for an {\em abstract} type (or one that
-will be abstract outside this module), which might happen for an
-imported function, then we can't (or don't want to...) unpack the arg
-as the worker requires. Hence we have to give up altogether, and call
-the wrapper only; so under these circumstances we return \tr{False}.
+workerExists :: WorkerInfo -> Bool
+workerExists NoWorker = False
+workerExists (HasWorker _ _) = True
-\begin{code}
-instance Text Demand where
- readList str = read_em [{-acc-}] str
- where
- read_em acc [] = [(reverse acc, "")]
- -- lower case indicates absence...
- read_em acc ('L' : xs) = read_em (WwLazy False : acc) xs
- read_em acc ('A' : xs) = read_em (WwLazy True : acc) xs
- read_em acc ('S' : xs) = read_em (WwStrict : acc) xs
- read_em acc ('P' : xs) = read_em (WwPrim : acc) xs
- read_em acc ('E' : xs) = read_em (WwEnum : acc) xs
-
- read_em acc (')' : xs) = [(reverse acc, xs)]
- read_em acc ( 'U' : '(' : xs)
- = case (read_em [] xs) of
- [(stuff, rest)] -> read_em (WwUnpack stuff : acc) rest
- _ -> panic ("Text.Demand:"++str++"::"++xs)
-
- read_em acc other = panic ("IdInfo.readem:"++other)
-
- showList wrap_args rest = (concat (map show1 wrap_args)) ++ rest
- where
- show1 (WwLazy False) = "L"
- show1 (WwLazy True) = "A"
- show1 WwStrict = "S"
- show1 WwPrim = "P"
- show1 WwEnum = "E"
- show1 (WwUnpack args)= "U(" ++ (concat (map show1 args)) ++ ")"
-
-instance Outputable Demand where
- ppr sty si = ppStr (showList [si] "")
-
-instance OptIdInfo StrictnessInfo where
- noInfo = NoStrictnessInfo
-
- getInfo (IdInfo _ _ _ strict _ _ _ _ _ _) = strict
-
- addInfo id_info NoStrictnessInfo = id_info
- addInfo (IdInfo a b d _ e f g h i j) strict = IdInfo a b d strict e f g h i j
-
- ppInfo sty better_id_fn strictness_info
- = pp_strictness sty Nothing better_id_fn nullIdEnv strictness_info
-\end{code}
+workerId :: WorkerInfo -> Id
+workerId (HasWorker id _) = id
-We'll omit the worker info if the thing has an explicit unfolding
-already.
-\begin{code}
-pp_strictness sty _ _ _ NoStrictnessInfo = ifPprInterface sty pp_NONE
-
-pp_strictness sty _ _ _ BottomGuaranteed = ppPStr SLIT("_S_ _!_")
-
-pp_strictness sty for_this_id_maybe better_id_fn inline_env
- info@(StrictnessInfo wrapper_args wrkr_maybe)
- = let
- (have_wrkr, wrkr_id) = case wrkr_maybe of
- Nothing -> (False, panic "ppInfo(Strictness)")
- Just xx -> (True, xx)
-
- wrkr_to_print = better_id_fn wrkr_id
- wrkr_info = getIdInfo wrkr_to_print
-
- -- if we aren't going to be able to *read* the strictness info
- -- in TcPragmas, we need not even print it.
- wrapper_args_to_use
- = if not (indicatesWorker wrapper_args) then
- wrapper_args -- no worker/wrappering in any case
- else
- case for_this_id_maybe of
- Nothing -> wrapper_args
- Just id -> if externallyVisibleId id
- && (unfoldingUnfriendlyId id || not have_wrkr) then
- -- pprTrace "IdInfo: unworker-ising:" (ppCat [ppr PprDebug have_wrkr, ppr PprDebug id]) $
- map un_workerise wrapper_args
- else
- wrapper_args
-
- id_is_worker
- = case for_this_id_maybe of
- Nothing -> False
- Just id -> isWorkerId id
-
- am_printing_iface = case sty of { PprInterface -> True ; _ -> False }
-
- pp_basic_info
- = ppBesides [ppStr "_S_ \"",
- ppStr (showList wrapper_args_to_use ""), ppStr "\""]
-
- pp_with_worker
- = ppBesides [ ppSP, ppChar '{',
- ppIdInfo sty wrkr_to_print True{-wrkr specs, yes!-} better_id_fn inline_env wrkr_info,
- ppChar '}' ]
- in
- if all_present_WwLazies wrapper_args_to_use then -- too boring
- ifPprInterface sty pp_NONE
-
- else if id_is_worker && am_printing_iface then
- pp_NONE -- we don't put worker strictness in interfaces
- -- (it can be deduced)
-
- else if not (indicatesWorker wrapper_args_to_use)
- || not have_wrkr
- || boringIdInfo wrkr_info then
- ppBeside pp_basic_info ppNil
- else
- ppBeside pp_basic_info pp_with_worker
- where
- un_workerise (WwLazy _) = WwLazy False -- avoid absence
- un_workerise (WwUnpack _) = WwStrict
- un_workerise other = other
+wrapperArity :: WorkerInfo -> Arity
+wrapperArity (HasWorker _ a) = a
\end{code}
+
%************************************************************************
%* *
-\subsection[unfolding-IdInfo]{Unfolding info about an @Id@}
+\subsection[CG-IdInfo]{Code generator-related information}
%* *
%************************************************************************
\begin{code}
-mkUnfolding guide expr
- = GenForm False (mkFormSummary NoStrictnessInfo expr)
- (BSCC("OccurExpr") occurAnalyseGlobalExpr expr ESCC)
- guide
-\end{code}
+-- CafInfo is used to build Static Reference Tables (see simplStg/SRT.lhs).
-\begin{code}
-noInfo_UF = NoUnfoldingDetails
+data CafInfo
+ = MayHaveCafRefs -- either:
+ -- (1) A function or static constructor
+ -- that refers to one or more CAFs,
+ -- (2) A real live CAF
-getInfo_UF (IdInfo _ _ _ _ unfolding _ _ _ _ _)
- = case unfolding of
- GenForm _ _ _ BadUnfolding -> NoUnfoldingDetails
- unfolding_as_was -> unfolding_as_was
+ | NoCafRefs -- A function or static constructor
+ -- that refers to no CAFs.
--- getInfo_UF ensures that any BadUnfoldings are never returned
--- We had to delay the test required in TcPragmas until now due
--- to strictness constraints in TcPragmas
+vanillaCafInfo = MayHaveCafRefs -- Definitely safe
-addInfo_UF id_info@(IdInfo a b c d e f g h i j) NoUnfoldingDetails = id_info
-addInfo_UF (IdInfo a b d e _ f g h i j) uf = IdInfo a b d e uf f g h i j
-\end{code}
+mayHaveCafRefs MayHaveCafRefs = True
+mayHaveCafRefs _ = False
-\begin{code}
-pp_unfolding sty for_this_id inline_env uf_details
- = case (lookupIdEnv inline_env for_this_id) of
- Nothing -> pp uf_details
- Just dt -> pp dt
- where
- pp NoUnfoldingDetails = pp_NONE
-
- pp (MagicForm tag _)
- = ppCat [ppPStr SLIT("_MF_"), ppPStr tag]
-
- pp (GenForm _ _ _ BadUnfolding) = pp_NONE
-
- pp (GenForm _ _ template guide)
- = let
- untagged = unTagBinders template
- in
- if untagged `isWrapperFor` for_this_id
- then -- pprTrace "IdInfo:isWrapperFor:" (ppAbove (ppr PprDebug for_this_id) (ppr PprDebug untagged))
- pp_NONE
- else ppCat [ppPStr SLIT("_F_"), ppr sty guide, pprCoreUnfolding untagged]
+seqCaf c = c `seq` ()
+ppCafInfo NoCafRefs = ptext SLIT("NoCafRefs")
+ppCafInfo MayHaveCafRefs = empty
\end{code}
%************************************************************************
%* *
-\subsection[update-IdInfo]{Update-analysis info about an @Id@}
+\subsection[cpr-IdInfo]{Constructed Product Result info about an @Id@}
%* *
%************************************************************************
-\begin{code}
-data UpdateInfo
- = NoUpdateInfo
- | SomeUpdateInfo UpdateSpec
- deriving (Eq, Ord)
- -- we need Eq/Ord to cross-chk update infos in interfaces
-
--- the form in which we pass update-analysis info between modules:
-type UpdateSpec = [Int]
-\end{code}
+If the @Id@ is a function then it may have CPR info. A CPR analysis
+phase detects whether:
-\begin{code}
-mkUpdateInfo = SomeUpdateInfo
-
-updateInfoMaybe NoUpdateInfo = Nothing
-updateInfoMaybe (SomeUpdateInfo []) = Nothing
-updateInfoMaybe (SomeUpdateInfo u) = Just u
-\end{code}
+\begin{enumerate}
+\item
+The function's return value has a product type, i.e. an algebraic type
+with a single constructor. Examples of such types are tuples and boxed
+primitive values.
+\item
+The function always 'constructs' the value that it is returning. It
+must do this on every path through, and it's OK if it calls another
+function which constructs the result.
+\end{enumerate}
-Text instance so that the update annotations can be read in.
+If this is the case then we store a template which tells us the
+function has the CPR property and which components of the result are
+also CPRs.
\begin{code}
-instance Text UpdateInfo where
- readsPrec p s | null s = panic "IdInfo: empty update pragma?!"
- | otherwise = [(SomeUpdateInfo (map ok_digit s),"")]
- where
- ok_digit c | c >= '0' && c <= '2' = ord c - ord '0'
- | otherwise = panic "IdInfo: not a digit while reading update pragma"
+#ifdef OLD_STRICTNESS
+data CprInfo
+ = NoCPRInfo
+ | ReturnsCPR -- Yes, this function returns a constructed product
+ -- Implicitly, this means "after the function has been applied
+ -- to all its arguments", so the worker/wrapper builder in
+ -- WwLib.mkWWcpr checks that that it is indeed saturated before
+ -- making use of the CPR info
-instance OptIdInfo UpdateInfo where
- noInfo = NoUpdateInfo
+ -- We used to keep nested info about sub-components, but
+ -- we never used it so I threw it away
- getInfo (IdInfo _ _ _ _ _ update _ _ _ _) = update
+seqCpr :: CprInfo -> ()
+seqCpr ReturnsCPR = ()
+seqCpr NoCPRInfo = ()
- addInfo id_info NoUpdateInfo = id_info
- addInfo (IdInfo a b d e f _ g h i j) upd_info = IdInfo a b d e f upd_info g h i j
-
- ppInfo sty better_id_fn NoUpdateInfo = ifPprInterface sty pp_NONE
- ppInfo sty better_id_fn (SomeUpdateInfo []) = ifPprInterface sty pp_NONE
- ppInfo sty better_id_fn (SomeUpdateInfo spec)
- = ppBeside (ppPStr SLIT("_U_ ")) (ppBesides (map ppInt spec))
-\end{code}
+noCprInfo = NoCPRInfo
-%************************************************************************
-%* *
-\subsection[deforest-IdInfo]{Deforestation info about an @Id@}
-%* *
-%************************************************************************
+ppCprInfo NoCPRInfo = empty
+ppCprInfo ReturnsCPR = ptext SLIT("__M")
-The deforest info says whether this Id is to be unfolded during
-deforestation. Therefore, when the deforest pragma is true, we must
-also have the unfolding information available for this Id.
+instance Outputable CprInfo where
+ ppr = ppCprInfo
-\begin{code}
-data DeforestInfo
- = Don'tDeforest -- just a bool, might extend this
- | DoDeforest -- later.
- -- deriving (Eq, Ord)
+instance Show CprInfo where
+ showsPrec p c = showsPrecSDoc p (ppr c)
+#endif
\end{code}
-\begin{code}
-instance OptIdInfo DeforestInfo where
- noInfo = Don'tDeforest
-
- getInfo (IdInfo _ _ _ _ _ _ deforest _ _ _) = deforest
-
- addInfo id_info Don'tDeforest = id_info
- addInfo (IdInfo a b d e f g _ h i j) deforest =
- IdInfo a b d e f g deforest h i j
-
- ppInfo sty better_id_fn Don'tDeforest
- = ifPprInterface sty pp_NONE
- ppInfo sty better_id_fn DoDeforest
- = ppPStr SLIT("_DEFOREST_")
-\end{code}
%************************************************************************
%* *
-\subsection[argUsage-IdInfo]{Argument Usage info about an @Id@}
+\subsection[lbvar-IdInfo]{Lambda-bound var info about an @Id@}
%* *
%************************************************************************
-\begin{code}
-data ArgUsageInfo
- = NoArgUsageInfo
- | SomeArgUsageInfo ArgUsageType
- -- ??? deriving (Eq, Ord)
-
-data ArgUsage = ArgUsage Int -- number of arguments (is linear!)
- | UnknownArgUsage
-type ArgUsageType = [ArgUsage] -- c_1 -> ... -> BLOB
-\end{code}
+If the @Id@ is a lambda-bound variable then it may have lambda-bound
+var info. Sometimes we know whether the lambda binding this var is a
+``one-shot'' lambda; that is, whether it is applied at most once.
+
+This information may be useful in optimisation, as computations may
+safely be floated inside such a lambda without risk of duplicating
+work.
\begin{code}
-mkArgUsageInfo = SomeArgUsageInfo
+data LBVarInfo = NoLBVarInfo
+ | IsOneShotLambda -- The lambda is applied at most once).
-getArgUsage :: ArgUsageInfo -> ArgUsageType
-getArgUsage NoArgUsageInfo = []
-getArgUsage (SomeArgUsageInfo u) = u
+seqLBVar l = l `seq` ()
\end{code}
\begin{code}
-instance OptIdInfo ArgUsageInfo where
- noInfo = NoArgUsageInfo
+hasNoLBVarInfo NoLBVarInfo = True
+hasNoLBVarInfo IsOneShotLambda = False
- getInfo (IdInfo _ _ _ _ _ _ _ au _ _) = au
+noLBVarInfo = NoLBVarInfo
- addInfo id_info NoArgUsageInfo = id_info
- addInfo (IdInfo a b d e f g h _ i j) au_info = IdInfo a b d e f g h au_info i j
+pprLBVarInfo NoLBVarInfo = empty
+pprLBVarInfo IsOneShotLambda = ptext SLIT("OneShot")
- ppInfo sty better_id_fn NoArgUsageInfo = ifPprInterface sty pp_NONE
- ppInfo sty better_id_fn (SomeArgUsageInfo []) = ifPprInterface sty pp_NONE
- ppInfo sty better_id_fn (SomeArgUsageInfo aut)
- = ppBeside (ppPStr SLIT("_L_ ")) (ppArgUsageType aut)
+instance Outputable LBVarInfo where
+ ppr = pprLBVarInfo
+instance Show LBVarInfo where
+ showsPrec p c = showsPrecSDoc p (ppr c)
+\end{code}
-ppArgUsage (ArgUsage n) = ppInt n
-ppArgUsage (UnknownArgUsage) = ppChar '-'
-ppArgUsageType aut = ppBesides
- [ ppChar '"' ,
- ppIntersperse ppComma (map ppArgUsage aut),
- ppChar '"' ]
-\end{code}
%************************************************************************
%* *
-\subsection[FBType-IdInfo]{Type of an expression through Foldr/build's eyes}
+\subsection{Bulk operations on IdInfo}
%* *
%************************************************************************
+@zapLamInfo@ is used for lambda binders that turn out to to be
+part of an unsaturated lambda
+
\begin{code}
-data FBTypeInfo
- = NoFBTypeInfo
- | SomeFBTypeInfo FBType
- -- ??? deriving (Eq, Ord)
+zapLamInfo :: IdInfo -> Maybe IdInfo
+zapLamInfo info@(IdInfo {occInfo = occ, newDemandInfo = demand})
+ | is_safe_occ occ && is_safe_dmd demand
+ = Nothing
+ | otherwise
+ = Just (info {occInfo = safe_occ, newDemandInfo = Nothing})
+ where
+ -- The "unsafe" occ info is the ones that say I'm not in a lambda
+ -- because that might not be true for an unsaturated lambda
+ is_safe_occ (OneOcc in_lam _ _) = in_lam
+ is_safe_occ other = True
-data FBType = FBType [FBConsum] FBProd deriving (Eq)
+ safe_occ = case occ of
+ OneOcc _ once int_cxt -> OneOcc insideLam once int_cxt
+ other -> occ
-data FBConsum = FBGoodConsum | FBBadConsum deriving(Eq)
-data FBProd = FBGoodProd | FBBadProd deriving(Eq)
+ is_safe_dmd Nothing = True
+ is_safe_dmd (Just dmd) = not (isStrictDmd dmd)
\end{code}
\begin{code}
-mkFBTypeInfo = SomeFBTypeInfo
-
-getFBType :: FBTypeInfo -> Maybe FBType
-getFBType NoFBTypeInfo = Nothing
-getFBType (SomeFBTypeInfo u) = Just u
+zapDemandInfo :: IdInfo -> Maybe IdInfo
+zapDemandInfo info@(IdInfo {newDemandInfo = dmd})
+ | isJust dmd = Just (info {newDemandInfo = Nothing})
+ | otherwise = Nothing
\end{code}
-\begin{code}
-instance OptIdInfo FBTypeInfo where
- noInfo = NoFBTypeInfo
-
- getInfo (IdInfo _ _ _ _ _ _ _ _ fb _) = fb
-
- addInfo id_info NoFBTypeInfo = id_info
- addInfo (IdInfo a b d e f g h i _ j) fb_info = IdInfo a b d e f g h i fb_info j
-
- ppInfo PprInterface _ NoFBTypeInfo = ppNil
- ppInfo sty _ NoFBTypeInfo = ifPprInterface sty pp_NONE
- ppInfo sty _ (SomeFBTypeInfo (FBType cons prod))
- = ppBeside (ppPStr SLIT("_F_ ")) (ppFBType cons prod)
-
---ppFBType (FBType n) = ppBesides [ppInt n]
---ppFBType (UnknownFBType) = ppBesides [ppStr "-"]
---
-
-ppFBType cons prod = ppBesides
- ([ ppChar '"' ] ++ map ppCons cons ++ [ ppChar '-', ppProd prod, ppChar '"' ])
- where
- ppCons FBGoodConsum = ppChar 'G'
- ppCons FBBadConsum = ppChar 'B'
- ppProd FBGoodProd = ppChar 'G'
- ppProd FBBadProd = ppChar 'B'
-\end{code}
projects / ghc-hetmet.git / blobdiff